controlr instructions (1) - sim racing...
Post on 26-Feb-2021
2 Views
Preview:
TRANSCRIPT
ControlR Interface Instructions
Thank you for purchasing an SRH ControlR Interface. Each unit is hand made using the finest
materials to produce a truly special and unique product for your enjoyment! Please read and
follow these instructions to ensure a simple fitment and ease of use.
INSTALLATION:
The ControlR comes complete with its own adjustable mounting brackets, these brackets are
height adjustable (Via the 4 Allen screws/slots) to enable the fitment of ‘add-on’ units. The
brackets have 4 mounting holes in the feet to secure the unit to your rig or desktop etc. Please
do not over tighten any of the bolts to avoid damage to your ControlR!
Once mounted, simply plug in the supplied USB lead to the ControlR and your PC and allow the
device driver software to install (a few moments). Your unit is now ready to use!
OPERATION:
The ControlR comes fully configured and is ready to use! The toggle switches send a ‘pulse’ or
button press every time they are operated (up OR down) and are far more realistic than
momentary switches. Rotary Encoders are ‘assigned’ in game the same way as buttons, just
turn left as one button and right as another.
ADD-ON UNITS
ControlR has been designed as a modular system that can be upgraded and added to by the
user in stages. We will release more information and add-on units for ControlR in the near
future and will include a Bottom Box unit and a Gauge Pack.
FINALLY
We would like to thank you again for purchasing your ControlR and assure you that as an SRH
customer, you have full technical backup and e-mail support just a message away! Feel free to
contact us via the contact page here: http://simracinghardware.com/contact-srh/ and we will get
back to you as quickly as possible!
top related