constr catalog web
Post on 14-Apr-2018
224 Views
Preview:
TRANSCRIPT
-
7/27/2019 Constr Catalog Web
1/31
Elco Const ruct ion Product sQuality Fasteners for the Construction Industry
www.elcoconstruction.com
Product Cat alog
Fastener Sealing System
Drill Screws
-
7/27/2019 Constr Catalog Web
2/31
Twelv
eWarehouseLocationsToS
erveYouBetter
-
7/27/2019 Constr Catalog Web
3/31
3
Design & Application Assistance
Our application specialists can analyze your productdesigns and assist with optimal fastener selection.
They can also offer design and material options.
Installat ion Analysis
Our commitment to you continues during andafter construction. If a problem should arise, ourapplications specialists are available to investigateand determine the cause.
Pricing, Availability and Ordering Information
With only a few exceptions, all the items in thiscatalog are considered stock items. As such, theyare usually available for shipment within 24 hours.Many parts are also stocked at various strategiclocations around the United States to increase theiaccessibility.
For price and specific product availability, or toplace an order, simply call 1-800-435-7213 and askfor customer service. Elco Construction Productsonly sells to authorized distributors.
Ordering Non-Stock Standard Parts
We recognize that all applications are uniqueand may require fastening solutions that are notconsidered standard. Specials are considered anintegral part of what we offer to the marketplace.Because we offer such extensive manufacturingcapabilities, we can customize a fastener to meet
the specific needs of your application. A wide rangeof sizes, materials, drive styles, head styles andmore are possible. Please contact a CustomerService Representative for assistance.
Special Services
Head Painting: Virtually any color can be matched,using the highest quality paint available tomaximize adhesion and minimize chipping.
Packaging: In addition to the standard packagingindicated in this catalog, alternative packaging
options are available ranging from bulk shipmentsin tubs to small-count poly bag packs.
To find the latest catalog information, learn aboutour custom capabilities and services, or find designand other technical data. log ontowww.elcoconstruction.com.
A Commitment to theConstruction Industry
Elco Construction Productsprovides a broad range ofquality fasteners and value-added services designed
to speed construction,improve building integrity and ensure performanceunder demanding conditions.
Dril-Flexstructural drill screws that are virtuallyimmune to embrittlement failure
Bi-Flex 300 series (18-8) stainless steel self-drilling screws
Dril l t i teprecision milled drill screws for greatersharpness
Drilitscrews with forged self-drilling points in avariety of styles
30 0 series stainless steel screws, in self-tappingand self-drilling styles
UltraConmasonry fasteners now available inblue, silver, white or bronze Stalgard finish in3/16," 1/ 4" and 5/16" diameters
ConFlexlarge diameter masonry fasteners
Aggre-gator300 series (18-8) stainless steelbi-metal concrete anchors
New sizes and styles ofHangerMatethreadedrod anchoring system
Fab-Lokclamping fasteners, now available in aheavy-duty (HD) design
In addition, many of the products shown in thiscatalog can be customized to meet the needs ofyour application.
We have attempted to make this catalog ascomplete and accurate as possible, but changesare inevitable. More part numbers and productlines will be added on a regular basis. Visit ourwebsite for the most up-to-date literature.
New Product DevelopmentOur close relationship with the constructionindustry has led to many innovative productscustomized for specific applications. Ourapplication engineers can work directly with you tofind solutions for your particular need.
Quality Products from Elco Construction Products
-
7/27/2019 Constr Catalog Web
4/31
Need theLatest
Product InfoDeliveredInstantly?
go to
www.elcoconstruction.com
Downloadable informationincludes:
Product overviews
Specifications
Performance Data
Installation instructions
Catalog updates
Approvals such asMiami-Dade NOA,UL Listings andFM Approvals
It
sabout
time!
-
7/27/2019 Constr Catalog Web
5/31
5
Table of Contents
Standard Drill Screws ................................................... 7
DrilitDrill Screws with Bonded Sealing Washers ........... 9
DrilitDrill Screws for Wood-to-Metal Applications ........ 10
Drill Screws with Extended Drilling Capacity ................. 11
Flo-SealDrill Screws with Integral Sealing Washers ..... 12
TapfastFasteners ..................................................... 13
Architectural Roof Clip Fasteners ................................. 14
Dril-FlexStructural Drill Screws .................................. 15
Bi-Flex Stainless Steel Self-Drilling Screws ................. 16
302 (18-8) Stainless Steel Drill Screws ....................... 17
304 Stainless Steel Self-Tapping Screws ..................... 18
Fab-LokFasteners .................................................... 19
UltraConMasonry Fasteners ..................................... 20
Crete-FlexSS4 Masonry Fasteners ............................ 23
Con-FlexLarge Diameter Masonry Fasteners .............. 24
Aggre-GatorBi-Metal Concrete Anchors ...................... 25
HangerMateThreaded Rod Anchoring System ............ 26
PanelMateStorm Panel Anchors ................................ 28
RapidSetTools ......................................................... 30
-
7/27/2019 Constr Catalog Web
6/31
7For product or ordering information, call 1.800.435.7213 (USA and Canada)
Drilit Standard Drill ScrewsSelf-drilling fasteners in the most popular sizes
Self-drilling fasteners eliminate separate drilling and tapping operations forfaster, more economical installations.
SpecificationsDiameters: #8 to 5/16"
Lengths: 1/ 2" to 4"
Head Styles: Hex washer, slottedhex washer, pan and oval
Drive Systems: Hex and phillips
Material: Carbon steel
Finishes: Stalgardcoating or zincplating
Features & BenefitsEliminates separate drilling andtapping operations
Broad selection of sizes
Fasteners coated with Stalgardfinish typically show no red rust orother base metal corrosion onsignificant surfaces even after800 hours of 5%neutral salt sprayexposure (per ASTM B117)
Cat alog No. Descript ion Point Type Finish Cart on Quant it y Weight / Cart on
#8 Diameter, Hex Washer Head
EDA235 8-18 x 1/ 2 #2 zinc 10,000 35
EDA236 8-18 x 1/2 #2 Stalgard 10,000 35
EDA261 8-18 x 3/4 #3 Stalgard 10,000 41
EDA286 8-18 x 1 #2 Stalgard 5,000 27
#8 Diameter, Phillips Pan Head
EDD251 8-18 x 1/2 #2 Stalgard 10,000 34
EDD266 8-18 x 3/4 #2 Stalgard 10,000 42
EDD291 8-18 x 1 #2 Stalgard 8,000 43
#10 Diameter, Hex Washer Head
EDB401 10-16 x 1/2 #3 Stalgard 8,000 41
EDB426 10-16 x 5/ 8 #3 Stalgard 6,000 43
EDB446 10-16 x 3/4 #3 Stalgard 6,000 38
EDC450 10-16 x 3/4 #1 zinc 5,000 32
EFB463 10-16 x 3/4 #3 zinc 6,000 38
EFB464 10-16 x 3/4 #3 Stalgard 6,000 38
EDB486 10-16 x 1 #3 Stalgard 5,000 37
EFB550 10-16 x 1-1/ 2 #3 Stalgard 3,000 30
EDB541 10-16 x 1-1/ 2 #3 Stalgard 3,000 30
EDB571 10-16 x 2 #3 Stalgard 2,000 25
#12 Diameter, Hex Washer Head
EDC745 12-14 x 3/4 #1 stitch zinc 5,000 38
EDB741 12-14 x 3/4 #3 Stalgard 5,000 44
EDB761 12-14 x 1 #3 Stalgard 4,000 37
EDB782 12-14 x 1-1/4 #3 Stalgard 3,000 36
EDB801 12-14 x 1-1/2 #3 Stalgard 2,500 35
EDB821 12-14 x 2 #3 Stalgard 2,000 34
EDB830 12-14 x 2 1/2 #3 Stalgard 1,500 29EDB840 12-14 x 3 #3 Stalgard 1,000 24
EDB845 12-14 X 4 #3 Stalgard 500 15
-
7/27/2019 Constr Catalog Web
7/31
8 For product or ordering information, call 1.800.435.7213 (USA and Canada)
Drilit Standard Drill ScrewsSelf-drilling fasteners in the most popular sizes
Cat alog No. Descript ion Point Type Finish Cart on Quant it y Weight / Cart on
1/ 4" Diameter, Hex Washer Head
EDB936 1/4-14 x 3/4 #3 Stalgard 3,500 46
EDC930 1/4-14 x 7/ 8 #1 Stitch Stalgard 4,000 38
EDB946 1/4-14 x 1 #3 Stalgard 3,000 45
EDB956 1/4-14 x 1-1/4 #3 Stalgard 2,000 35EDB961 1/4-14 x 1-1/ 2 #3 Stalgard 2,000 39
EDB971 1/4-14 x 2 #3 Stalgard 1,500 36
EDB976 1/4-14 x 2 1/2 #3 Stalgard 1,000 30
EDB981 1/4-14 x 3 #3 Stalgard 800 28
EDB983 1/4-14 x 4 #3 Stalgard 500 28
EDB984 1/4-20 x 1 #3 Stalgard 2,500 45
5/ 16" Diameter, Hex Washer Head
EDB991 5/16-18 x 1 #3 Stalgard 1000 30
EDB994 5/16-18 x 1-1/4 #3 Stalgard 1000 34
EDB998 5/16-18 x 1-1/2 #3 Stalgard 1000 38
Drill Point Type Selection Guide
Standard SheetM et al Sizes Nominal Screw Sizes
Thread Dia. Decimal
#6 .140
#7 .150
#8 .160
#9 .180
#10 .190
#11 .200
#12 .210
1/ 4 .240
#14 .250
Gage Decimal
26 0.018
24 0.024
22 0.030
20 0.038
18 0.048
16 0.060
14 0.075
12 0.106
1
#12 1/ 4" #12 1/ 4" #12 1/ 4" #12 1/ 4" #12 1/ 4"#10 #10#12
Point Type
Diameter
54 4.532
.500"
.100"
.200"
.300"
.400"
.000"
.062"
.210"
.312"
.375"
.110"
.150"
.175"
-
7/27/2019 Constr Catalog Web
8/31
9For product or ordering information, call 1.800.435.7213 (USA and Canada)
Drilit Drill Screws with Bonded Sealing WashersEconomical fasteners for applications requiring a weather-tight seal
This economical line of drill screws provides a weather-tight seal forprotection against the elements.
SpecificationsDiameters: #10 to 1/ 4"
Lengths: 3/ 4" to 4"
Head Styles: Hex washer
Drive System: Hex
Point Types: #1 (stitch) and #3
Material: Carbon steel
Finish: Stalgard coating
Features & BenefitsEPDM washer material is UV-and heat-resistant for long-term
protection against leakageStalgard coating provides 800hours of salt spray resistance(per ASTM B117)
Cat alog No. Descript ion Point Type M at erial Finish Cart on Quant it y Weight / Cart on
#10 Diameter, Hex Washer Head
EFW525 10-16 x 3/4 #3 carbon steel zinc 4,000 21
EFW555 10-16 x 1-1/ 2 #3 carbon steel Stalgard 2,000 21EHL111 10-16 x 3/4 #3 carbon steel Stalgard 3,000 21
EHL146 10-16 x 1-1/ 2 #3 carbon steel Stalgard 2,000 21
#12 Diameter, Hex Washer Head
EHL165 12-14 x 3/4 #3 carbon steel Stalgard 3,000 24
EHL181 12-14 x 1 #3 carbon steel Stalgard 1,500 26
EHL235 12-14 x 1-1/4 #3 carbon steel Stalgard 2,000 23
EHL276 12-14 x 1-1/2 #3 carbon steel Stalgard 2,000 29
EHL280 12-14 x 2 #3 carbon steel Stalgard 1,500 27
EHL285 12-14 x 2-1/2 #3 carbon steel Stalgard 1,000 21
EHL295 12-14 x 3 #3 carbon steel Stalgard 500 13
EHL310 12-14 x 4 #3 carbon steel Stalgard 500 14
1/ 4" Diameter, Hex Washer Head
EHL515 1/4-14 x 3/4 #3 carbon steel Stalgard 2,500 36
EHK315 1/4-14 x 7/ 8 #1 stitch carbon steel Stalgard 2,500 31
EHL530 1/4-14 x 1 #3 carbon steel Stalgard 2,000 37
EHL556 1/4-14 x 1-1/4 #3 carbon steel Stalgard 1,500 28
EHL577 1/4-14 x 1-1/2 #3 carbon steel Stalgard 1,500 30
EHL585 1/4-14 x 2 #3 carbon steel Stalgard 1,000 26
EHL595 1/4-14 x 2-1/ 2 #3 carbon steel Stalgard 1,000 30
EHL600 1/4-14 x 3 #3 carbon steel Stalgard 500 18
EHL610 1/4-14 x 4 #3 carbon steel Stalgard 500 22
-
7/27/2019 Constr Catalog Web
9/31
10 For product or ordering information, call 1.800.435.7213 (USA and Canada)
Drilit Drill Screws for Wood-to-Metal ApplicationsFor efficient fastening of wood or composite materials to steel
These self-drilling fasteners are designed to eliminate separate drilling andtapping operations for faster installation in wood-to-metal applications.
SpecificationsDiameters: #8 to 1/4"
Lengths: 3/4" to 3-15/16"
Head Styles: Flat and wafer
Drive System: Phillips
Point Styles: Types 3 and 4
Material: Carbon steel
Finishes: Gray Stalgardcoating orphosphate
Features & BenefitsEliminates costly pre-drilling of wood
Broad selection of sizes
Can be used with steel up to5/16" thick
Gray Stalgard coating provides 1000hours of salt spray resistance and wasdeveloped for use with ACQ treatedlumber with retention levels no higherthan .25 PCF
Cat alog No. Desc ript ion Drive Point Type Finish Quant it y/ Shipper
# 8 Diameter; Flat Head
EDK300 8-18 x 1-15/16" #2 Phillips #3 w/ Pilot Phosphate 4000
# 10 Diameter; Wafer Head
EDM582 10-24 x 3/4" #2 Phillips #3 Gray Stalgard 8000
EDM592 10-24 x 1" #2 Phillips #3 Gray Stalgard 6000
EDM607 10-24 x 1-1/4" #2 Phillips #3 Gray Stalgard 5000
EDT602 10-24 x 1-7/16" #2 Phillips #3 w/ Wings Gray Stalgard 4000
EDM622 10-24 x 1-1/2" #2 Phillips #3 Gray Stalgard 3500
EDM635 10-24 x 1-13/16" #2 Phillips #2 Gray Stalgard 2500
# 11 Diameter; Wafer Head
EDT630 11-16 x 2-15/16" #3 Phillips #4 w/ Wings Gray Stalgard 1000
EDT635 11-16 x 3-7/16" #3 Phillips #4 w/ Wings Gray Stalgard 1000
EDT640 11-16 x 3-15/16" #3 Phillips #4 w/ Wings Gray Stalgard 500
# 12 Diameter; Wafer Head
EDT720 12-24 x 1-3/4" #3 Phillips #4 w/ Wings Gray Stalgard 2500
# 12 Diameter; Flat Head
EDT267 12-24 x 2-1/4" #3 Phillips #4 w/ Wings Gray Stalgard 2000
EDT282 12-24 x 2-3/4" #3 Phillips #4 w/ Wings Gray Stalgard 1500
EDJ867 12-14 x 3-5/ 8" #3 Phillips #2 w/ Pilot Gray Stalgard 1000
1/ 4" Diameter ; Flat Head
EDT442 1/4-20 x 3" #3 Phillips #4 w/ Wings Gray Stalgard 1000
-
7/27/2019 Constr Catalog Web
10/31
1 1For product or ordering information, call 1.800.435.7213 (USA and Canada)
Drill Screws with Extended Drilling CapacitySpecially-designed drill points handle the toughest applications
This line of heavy-duty drill screws is designed for steel applications up to1/ 2" thick.
SpecificationsDiameters: #12 and 1/4"
Lengths: 7/8" to 8"
Head Style: Hex washer
Drive System: Hex
Material: Carbon steel
Finish: Silver Stalgard coating
Features & Benefits
Several parts available withbonded sealing washer
Points are either Dril-it forged orDrilltite precision milled points
Stalgard coating provides 800hours of salt spray resistance (perASTM B117)
Drilit Drill Screws
Cat alog No. Descript ion Point Type
M ax. Dri l l
Capacit y Finish
Carton
Quantity
Weight/
Carton
#1 2 Diameter; Decking Fasteners and Dri l l Screws for Steel Thicknesses of .175" to .5 00"
EDC801 12-24 x 7/ 8 #4 .312 Stalgard 4,500 43EHL351 12-24 x 7/ 8 w/ Bonded #4 .312 Stalgard 4,500 44
EDC816 12-24 x 1-1/4 #4.5 .375 Stalgard 3,500 44
EHL371 12-24 x 1-1/4 w/ Bonded #4.5 .375 Stalgard 3,500 45
EDC836 12-24 x 1-1/4 #5 .500 Stalgard 4,000 49
EHL411 12-24 x 1-1/4 w/ Bonded #5 .500 Stalgard 2,500 36
EDC846 12-24 x 1-1/2 #4.5 .375 Stalgard 2,500 33
EHL431 12-24 x 1-1/ 2 w/ Bonded #4.5 .375 Stalgard 2,500 34
EDC861 12-24 x 1 1/ 2 #5 .500 Stalgard 2,500 36
EHL446 12-24 x 1-1/ 2 w/ Bonded #5 .500 Stalgard 2,000 37
EDC881 12-24 x 2 #5 .500 Stalgard 2,000 30
EHL466 12-24 x 2 w/ Bonded #5 .500 Stalgard 1,500 28
EDC901 12-24 x 3 #5 .500 Stalgard 1,000 25EHL486 12-24 x 3 w/ Bonded #5 .500 Stalgard 1,000 26
#1 / 4 Diameter Decking Fasteners for Thick nesses of .175" t o .500"
EFC886 1/4-14 x 5 #5 .500 Stalgard 500 26
EFC896 1/4-14 x 6 #5 .500 Stalgard 500 30
EFC926 1/4-14 x 8 #5 .500 Stalgard 300 24
Dril l t i te Precision M il led Dri l l Screws
Cat alog No. Descript ion Point Type FinishCarton
QuantityWeight/Carton
#1 2 Diameter; Decking Fasteners and Dri l l Screws for Steel Thicknesses of .175" to .5 00"
ECC720 12-24 x 1-1/4 #5 Drilltite .500 Stalgard 4,000 49
ECW725 12-24 x 1-1/4 w/ Bonded #5 Drilltite .500 Stalgard 2,500 36ECC740 12-24 x 1-1/2 #5 Drilltite .500 Stalgard 2,500 36
ECW745 12-24 x 1-1/ 2 w/ Bonded #5 Drilltite .500 Stalgard 2,000 37
ECC750 12-24 x 2 #5 Drilltite .500 Stalgard 2,000 28
ECW755 12-24 x 2 w/ Bonded #5 Drilltite .500 Stalgard 1,500 25
ECC770 12-24 x 3 #5 Drilltite .500 Stalgard 1,000 25
ECW775 12-24 x 3 w/ Bonded #5 Drilltite .500 Stalgard 1,000 26
-
7/27/2019 Constr Catalog Web
11/31
1 2 For product or ordering information, call 1.800.435.7213 (USA and Canada)
Flo-Seal Drill Screws w it h Int egral Sealing WashersFor self-drilling applications requiring a weather-tight seal
Special underhead design and EPDM sealing washer combine to providea custom, weather-tight seal.
SpecificationsDiameters: #10 to 1/ 4"
Lengths: 3/4" to 2"
Head Style: Hex washer(5/16" across flats)
Drive System: Hex
Material: Carbon steel
Finish: Stalgard coating
Features & BenefitsEPDM washer is UV- and heat-resistant for long-term protection
against leakageReliable and consistent sealing evenin under-tightened, over-tightened, orangle-driven installations
Stalgard coating provides800 hours of salt spray resistance(per ASTM B117)
Cat alog No. Descript ion Hex Drive Size Point Type Finish Cart on Quant it y Weight / Cart on
# 10 Diamet er with Flo-Seal Hex Washer Head
EHB105 10-16 x 3/4 5/16 AF #2 Stalgard 4,000 40
EHB135 10-16 x 1-1/ 2 5/16 AF #2 Stalgard 2,000 20
# 12 Diameter wit h Flo-Seal Hex Washer Head
EHB150 12-14 x 3/4 5/16 AF #2 Stalgard 3,000 33
EHB180 12-14 x 1 5/16 AF #2 Stalgard 2,500 32
EHB235 12-14 x 1-1/4 5/16 AF #2 Stalgard 2,000 30
EHB295 12-14 x 1-1/ 2 5/16 AF #2 Stalgard 2,000 33
1/ 4" Diamet er with Flo-Seal Hex Washer Head
EHB515 1/4-14 x 7/ 8 5/16 AF #1 Stalgard 2,500 31
Features and Benefi t s of t he Flo-Seal Fast ener Sealing SystemFastener head engineered to control the flow ofthe special sealing washer, ensuring sealing incritical areas
Provides reliable and consistent sealing even inunder-tightened, over-tightened or angle-driveninstallations
Ensures long-term protection against leakage
Compensates for different installation situationsand techniques
Drill Screw wit h Flo-Seal System
Type #1 #3drill point
Flo-Sealsealingsystem with 9/16"O.D. EPDM one-pieceintegral washer
-
7/27/2019 Constr Catalog Web
12/31
1 3For product or ordering information, call 1.800.435.7213 (USA and Canada)
Features and Benefits of the Flo-Seal Fastener Sealing SystemFastener head engineered to control the flow ofthe special sealing washer, ensuring sealing incritical areas
Provides reliable and consistent sealing even inunder-tightened, over-tightened or angle-driveninstallations
Ensures long-term protection against leakage
Compensates for different installation situationsand techniques
TapFast FastenersFor use in metal-to-wood applications
High-performance fastener designed specifically for attaching for attachinglight-gage metal panels (18 ga. max.) to wood frame structures. UniqueFlo-Seal washer design provides enhanced sealing capabilities.
SpecificationsSize: #10
Lengths: 1" to 3"Head Style: 1/ 4" hex
Drive System: Hex
Point: Formed Type S cutting point
Material: Carbon steel
Finish: Stalgard coating
Features & BenefitsIncorporates Flo-Seal sealing washer
for a water-tight sealLarge diameter increases performance
Easily penetrates multiple panelthicknesses
Stalgard coating provides800 hours of salt spray resistance(per ASTM B117)
Cat alog No. Descript ion Point Finish Cart on Quant it y Weight / Cart on
#10 Diameter Fastener with Flo-Seal Hex Washer Head
EHH210 10-12 x 1" modified S point Stalgard 3,000 26
EHH230 10-12 x 1-1/ 2" modified S point Stalgard 2,500 28
EHH250 10-12 x 2" modified S point Stalgard 1,500 20
EHH265 10-12 x 2-1/2" modified S point Stalgard 1,000 17
EHH280 10-12 x 3" modified S point Stalgard 800 16
Flo-Sealsealing systemwith 9/ 16" O.D. EPDMone-piece integral washer
modified S point
TapFastFastener with Flo-Seal System
-
7/27/2019 Constr Catalog Web
13/31
1 4 For product or ordering information, call 1.800.435.7213 (USA and Canada)
Cat alog No. Descript ion Drive Syst em Head St yle Point Type Finish Cart on Quant it y
For Steel
EDO450 10-16 x 1" #2 Phillips Pancake #3 Silver Stalgard 5000EDO460 10-16 x 1-1/ 2" #2 Phillips Pancake #3 Silver Stalgard 3500
EDO470 10-16 x 2" #2 Phillips Pancake #3 Silver Stalgard 2500
EDO735 12-14 x 1" #2 Phillips Pancake #3 Silver Stalgard 4000
For Wood/ Thin Steel
ETA850 10-12 x 1" #2 Phillips Pancake Type S Gray Stalgard 5000
ETA855 10-12 x 1-1/ 2" #2 Phillips Pancake Type S Gray Stalgard 3500
ETA860 10-12 x 2" #2 Phillips Pancake Type S Gray Stalgard 2500
ETA870 12-11 x 1" #2 Phillips Pancake Type S Gray Stalgard 4000
Archit ect ural Roof Clip Fast enersLow-profile head design for wood and steel applications
The efficiency of self-drilling fasteners and the aethestics of an inobtrusivehead are ideal for attaching metal roof clips.
SpecificationsDiameters: #10 to #12"
Lengths: 1" to 2"
Head Styles: Pancake
Drive Systems: Phillips
Material: Carbon Steel
Finishes: Silver or Gray StalgardCoating
Features & BenefitsEliminates separate drilling andtapping operations
Pancake head improves aesthetics
Stalgard corrosion-resistantcoating provides 800 hours of saltspray resistance (per ASTM B117)
See page 26 ofthis catalog formore details.
Now Re-engineered To Simplify Installation!
One drive socket for all sizes in steel or woodapplications (except HangerMateLG)
One ASNI-standard drill bit size and one drive sleeve
for concrete applications Socket and sleeve fit contractor-grade tools
Heads precision drilled and tapped to accept 3/ 8-16or 1/ 4-20 threaded components
Different thread and point styles available to meet theneeds of steel, concrete or wood
Many styles FM approved and/or UL listed
-
7/27/2019 Constr Catalog Web
14/31
1 5For product or ordering information, call 1.800.435.7213 (USA and Canada)
Dril-Flex Struct ural Drill ScrewsFor use in structural applications
Precision-engineered and dual heat treated drill screws provide the strength,ductility and resistance to embrittlement needed for critical applications.
Specifications
Diameters: #10 to 5/16"
Lengths: 3/4" to 3-3/ 8"
Head Styles: Hex washer andundercut flat
Drive Systems: Hex and phillips
Point Types: #3 and #4
Material: Alloy steel
Finish: Silver Stalgard coating
Head Marking: Elco logo in araised circle
Features & Benefits
High-hardness points and leadthreads for drilling and tapping
Lower-hardness in load-bearingthreads for ductility
Virtually immune to delayedembrittlement failures
Stalgard coating provides 800hours of salt spray resistance(per ASTM B117)
Cat alog No. Descript ion Drive Syst em Head St yle Point St yle Finish Cart on Quant it y
#1 0 Diameter
EAF430 10-16 x 3/4" 5/16" hex hex washer #3 Stalgard 6000EBL530 10-24 x 1-1/4" #2 phillips wafer #3 Stalgard 5000
#1 2 Diameter
EAF621 12-14 x 7/ 8" 5/16" hex hex washer #3 Stalgard 5000
EAF641 12-14 x 1" 5/16" hex hex washer #3 Stalgard 4000
EAF681 12-14 x 1-1/2" 5/16" hex hex washer #3 Stalgard 2500
EAF690 12-14 x 2" 5/16" hex hex washer #3 Stalgard 2000
EBL215 12-14 x 1" #3 phillips undercut flat #3 Stalgard 4000
EAF755 12-24 x 1-3/4" 5/16" hex hex washer #5 Stalgard 2500
1/ 4" D iameter
EAF816 1/4-14 x 1" 3/ 8" hex hex washer #3 Stalgard 3000
EAF841 1/4-14 x 1-1/ 2" 3/ 8" hex hex washer #3 Stalgard 2000
EAF846 1/4-14 x 2" 3/ 8" hex hex washer #3 Stalgard 1500
EAF865 1/4-20 x 1-1/ 8" 3/ 8" hex hex washer #4 Stalgard 2500
EAF876 1/4-20 x 1-1/ 2" 3/ 8" hex hex washer #4 Stalgard 2000
EAF886 1/4-20 x 2" 3/ 8" hex hex washer #4 Stalgard 1500
EAF888 1/ 4-20 x 1 3/ 4" 3/ 8" hex hex washer #5 Stalgard 1000
EAF890 1/4-20 x 2-1/2" 3/ 8" hex hex washer #4 Stalgard 1000
5/ 16" D iameter
EAF960 5/16-24 x 1-1/ 2" 3/ 8" hex hex washer #4 Stalgard 1000
EAF970 5/16-24 x 2" 3/ 8" hex hex washer #4 Stalgard 1000
-
7/27/2019 Constr Catalog Web
15/31
16 For product or ordering information, call 1.800.435.7213 (USA and Canada)
Bi-Flex 300 Series St ainless St eel Bi-M et al Self-Drilling ScrewsBi-metal technology provides outstanding corrosion resistance and long service life
Bi-Flex fasteners provide the corrosion resistance of 300 series stainlesssteel and the efficiency of drillscrews.
SpecificationsDiameters: #10 to 1/ 4"
Lengths: 3/4" to 2-1/ 2"
Head Styles: Hex washer, flat andundercut flat
Drive Systems: Hex and phillips
Point Types: #2, #3 and #5
Material: Hardened steel tappingthreads and point fused onto an18-8 stainless steel shank andhead
Finish: Silver StalgardGB(Galvanic Barrier) coating
Features & BenefitsHigh strength, ductility andreliability
Virtually immune to delayedembrittlement failures
Greater galvanic compatibility indissimilar metal applicationsinvolving aluminum
Quickly drill and tap into steel oraluminum up to 1/ 2" thick
High in-place value over the life ofstructures, components andsystems
Standard packaging: keg quantities as shown.
Job Pack : Pieces per box as shown/six boxes per shipper. Available upon request. Indicate Job Pack by placing a P at the end of the ECPCatalog No.
CatalogNo. Size Lengt h Drive Syst em Point Size
Max.Drilling Cap.
Piecesper 1/ 4 Keg
Job Pack:Pieces per Box
Hex Washer Head
EAJ110 10-16 3/ 4" 5/ 16" hex 2 .110" 6000 250
EAJ185 12-14 1" 5/ 16" hex 2 .140" 4000 150
EAJ215 12-14 1-1/ 2" 5/ 16" hex 2 .140" 2500 125
EAJ240 12-14 2" 5/ 16" hex 2 .140" 2000 75
EAJ190 12-14 1" 5/ 16" hex 3 .210" 4000 150
EAJ220 12-14 1-1/ 2" 5/ 16" hex 3 .210" 2500 125
EAJ260 12-14 2-1/ 2" 5/ 16" hex 3 .210" 1500 50
EAJ340 12-24 2" 5/ 16" hex 5 .500" 2000 75
EAJ415 1/ 4-14 1" 3/ 8" hex 2 .175" 3000 125
EAJ430 1/ 4-14 1-1/ 2" 3/ 8" hex 2 .175" 2000 75
EAJ445 1/ 4-14 2" 3/ 8" hex 2 .175" 1500 50
EAJ540 1/ 4-20 1" 3/ 8" hex 3 .312" 2500 125
EAJ580 1/ 4-20 1-1/ 2" 3/ 8" hex 3 .312" 2000 75
EAJ610 1/ 4-20 2" 3/ 8" hex 3 .312" 1500 50
EAJ640 1/ 4-20 2-1/ 2" 3/ 8" hex 3 .312" 1000 50
EAJ615 1/ 4-20 2" 3/ 8" hex 5 .500" 1500 50
Flat Head Reamers w/ wings
EBN140 10-16 1-1/ 2" #2 phillips 3 .140" 3500 125
EBN345 12-24 2-13/ 16" #3 phillips 5 .500" 1500 50
EBN645 1/ 4-20 2-13/ 16" #3 phillips 5 .500" 1000 50
Flat Undercut Head
EBN200 12-14 1" #3 phillips 2 .140" 4000 150
EBN240 12-14 1-1/ 2" #3 phillips 2 .500" 2500 125
-
7/27/2019 Constr Catalog Web
16/31
17For product or ordering information, call 1.800.435.7213 (USA and Canada)
30 2 (18-8) St ainless St eel Drill ScrewsFor fastening to aluminum when corrosion is a primary concern
Stainless steel drill screws provide strength and corrosion resistance ina variety of aluminum applications.
SpecificationsDiameters: #10 to 1/ 4"
Lengths: 1/ 2" to 1-1/ 2"
Head Style: Hex washer
Drive System: Hex
Point Types: #3 and #4
Material: 302 stainless steel
Finish: Silver top coat
Features & Benefit sProvides a very high level ofcorrosion resistance
Silver top coat finish protectsaluminum from galvanic reactionwith fastener
Head marked with a 3 for easyidentification
Note: For aluminum applicat ions only.
Cat alog No. Descript ion Point Type Finish Cart on Quant it y Weight / Cart on
#10 Diameter Hex Washer Head
EAH430 10-16 x 1/ 2 #3 silver top coat 8000 43
EAH445 10-16 x 3/4 #3 silver top coat 6000 41EAH460 10-16 x 1 #3 silver top coat 4000 32
#12 Diameter Hex Washer Head
EAH630 12-14 x 3/4 #3 silver top coat 5000 40
EAH650 12-14 x 1 #3 silver top coat 5000 48
EAH680 12-14 x 1-1/ 2 #3 silver top coat 2500 39
1/ 4" Diameter Hex Washer Head
EAH800 1/4-14 x 3/4 #3 silver top coat 3500 44
EAH820 1/4-14 x 1 #3 silver top coat 3000 47
EAH835 1/4-14 x 1-1/ 2 #3 silver top coat 2000 40
EAH870 1/4-20 x 1 #4 silver top coat 3000 48
EAH880 1/4-20 x 1-1/ 2 #4 silver top coat 2000 40
-
7/27/2019 Constr Catalog Web
17/31
1 8 For product or ordering information, call 1.800.435.7213 (USA and Canada)
304 Stainless Steel Self-Tapping ScrewsFor applications where corrosion resistance is a primary concern
Elco manufactures and stocks the most popular 304 (18-8) stainlesssteel self-tapping screws with a 300 series stainless steel bondedsealing washer.
SpecificationsDiameters: #14 to #17
Lengths: 3/ 4" to 3"
Head Style and Drive System: Hex
Point Types: A and B
Material: 304 stainless steel
Finish: Zinc
Features & BenefitsThread/point styles available to
match your specific applicationSaves time and labor byeliminating tapping operations
Standard thread designs alloweasy field replacement
Zinc plated for lubricity and toreduce galvanic reaction
Cat alog No. Descript ion Drive Syst em Point Type Finish Cart on Quant it y
# 14 Diameter; Type A Point ; 3/ 8" Hex Head
EHE400 14-10 x 3/4 Hex A Zinc 3000
EHE410 14-10 x 1 Hex A Zinc 2500
EHE430 14-10 x 1-1/2 Hex A Zinc 2500
1/ 4" Diameter ; Type B Point; 3 / 8" Hex Head
EHE500 1/4-14 x 3/4 Hex B Zinc 3000
EHE510 1/4-14 x 1 Hex B Zinc 2500
EHE530 1/4-14 x 1-1/2 Hex B Zinc 2500
EHE550 1/4-14 x 2 Hex B Zinc 2000
EHE570 1/4-14 x 3 Hex B Zinc 1000
100%average improvement in drive bitlife; many users of the TORX PLUSDrive System have driven 2 to 10 timesmore fasteners per drive tool
Increases tool engagement
Virtually eliminates camout minimizestool slippage and damage it can cause
Ensures proper torque transfer
Greatly reduces end load requirements can reduce fatigue and muscular stressduring manual assembly of fasteners
largercross-sectional
area at lobeselliptically-based
geometry
0 driveangle
broadcontactsurface
Many configurationsavailable, includingtamper-resistant
Improves Installation Performance OverHex, Phi ll ips, TORX Drive and Ot hers!
-
7/27/2019 Constr Catalog Web
18/31
19For product or ordering information, call 1.800.435.7213 (USA and Canada)
Fab-Lok FastenersTo maintain panel integrity in high-stress and high-vibration environments
Vibration, either from inside or outside a building, can make ordinaryfasteners loosen and back out. Fab-Lok fasteners combine a slottedaluminum sleeve and fastener to provide high resistance to vibrationloosening. Excellent for use with insulated panels.
Specifications
Drive System: Hex
Materials: Low carbon steel or300 series stainless steel screwwith aluminum sleeve
Finish: Zinc
Features & Benefit s
Hex washer head machine screwassembled to a slotted aluminumsleeve and EPDM sealing washer
After tightening, clamping tinesremain in place even if screw isremoved
Greater joint integrity
*Fab-Lokfastener is inserted into a 5/ 16" hole (hole size is not critical) then installed with a power driver equipped with a Fab-Lok holding sleeve,with a socket designed to fit DeWalttools DW969K-2, DW968K-2, DW267, DW268 and DW269.
Cat alog No. Descript ion Penet rat ing Lengt h Grip Range Cart on Quant it y
Carbon Steel
EZJ100 FAS-10-4 1.373" .062" .250" 1000
EZJ120 FAS-10-8 1.612" .250" .500" 1000
EZJ140 FAS-10-12 1.807" .500" .750" 1000
H-3 (300 Series) Stainless Steel
EZJ210 FAC-10-4 1.373" .062" .250" 1000
EZJ230 FAC-10-8 1.612" .250 " .500" 1000
EZJ250 FAC-10-12 1.807" .500" .750" 1000
Fab-Lok Drive Tools*
EZJ900 Holding Sleeve with Socket 1
Bi-metal technology 300 (18-8) stainless steelhead and shank fused to a hardened steeltapping threads and gimlet point
Alternating, hi-low notched thread profile provides
quick cutting and stability during installationSilver-colored Stalgard GB (Galvanic Barrier)coating
Virtually immune to hydrogen-assisted stresscorrosion cracking
High strength/ductility
Provides out st anding corrosion resistanc e
The perfect choice forexposed/wet areas/ aggressive
environments
The corrosion resistance of 300 seriesst ainless st eel and t he effi ciency ofhardened steel t apping threads
See page 25 for more details.
-
7/27/2019 Constr Catalog Web
19/31
20 For product or ordering information, call 1.800.435.7213 (USA and Canada)
UltraCon Masonry Fastening SystemOffers optimal performance in concrete, brick and hollow block applications
UltraCon fasteners are available in a variety of styles to meet your needs.
SpecificationsDiameters: 3/ 16" to 5/16"
Head Styles: Hex, flat, hex flange,hex washer, TrimFit hex and
TrimFit flat
Drive Systems: Hex and phillips
Material: Carbon steel
Finishes: Blue, silver, and whiteStalgard coating standard;bronze available upon request
Features & BenefitsInstalls quickly when using Elcoinstallation tools
When all three elements of thesystem are used, consistentperformance and maximumpull-out strengths can be realized
Stalgard coating provides 800hours of salt spray resistance (perASTM B117)
Catalog Number (By Finish)
Dia. Lengt h Drive Syst em
Tanged Bit
Blue Silver Whit e Dia. Lengt h
Slotted Hex Washer Head
ELE300 3/16" 1-1/4" 5/16" slotted 5/ 32" 3-1/ 2"
ELE310 3/16" 1-3/4" 5/16" slotted 5/ 32" 3-1/ 2"
ELE320 3/16" 2-1/4" 5/16" slotted 5/ 32" 4-1/ 2"ELE330 3/16" 2-3/4" 5/16" slotted 5/ 32" 4-1/ 2"
ELE340 3/16" 3-1/4" 5/16" slotted 5/ 32" 5-1/2"ELE350 3/16" 3-3/4" 5/16" slotted 5/ 32" 5-1/2"
ELE360 3/16" 4" 5/16" slotted 5/ 32" 5-1/2"
ELE400 1/4" 1" 5/16" slotted 3/16" 3-1/2"ELE405 1/4" 1-1/4" 5/16" slotted 3/16" 3-1/ 2"
ELE415 ELG341* ELD195* 1/4" 1-3/4" 5/16" slotted 3/16" 3-1/2"ELE425 ELG371* ELD205* 1/4" 2-1/4" 5/16" slotted 3/16" 4-1/2"
ELE435 ELG401* 1/4" 2-3/4" 5/16" slotted 3/16" 4-1/2"ELE445 ELG431* ELD225* 1/4" 3-1/4" 5/16" slotted 3/16" 5-1/2"
ELE455 1/4" 3-3/4" 5/16" slotted 3/16" 5-1/2"
ELE465 1/4" 4" 5/16" slotted 3/16" 5-1/2"ELE475 ELD255* 1/4" 5" 5/16" slotted 3/16" 6-1/2"
ELE485 ELD265* 1/4" 6" 5/16" slotted 3/16" 7-1/ 2"Phillips Flat Head
ELF305 ELG521* ELD320* 3/16" 1-1/4" #2 phillips 5/32" 3-1/2"ELF315 ELG551* ELD330* 3/16" 1-3/4" #2 phillips 5/32" 3-1/2"
ELF325 ELG581* ELD340* 3/16" 2-1/4" #2 phillips 5/32" 4-1/2"
ELF335 ELG611* ELD350* 3/16" 2-3/4" #2 phillips 5/32" 4-1/2"ELF345 ELG641* ELD360* 3/16" 3-1/4" #2 phillips 5/32" 5-1/2"
ELF355 ELG671* ELD370* 3/16" 3-3/4" #2 phillips 5/32" 5-1/2"ELF365 ELD380* 3/16" 4" #2 phillips 5/32" 5-1/2"
ELF400 ELG731* ELD385* 1/4" 1-1/4" #3 phillips 3/16" 3-1/ 2"
ELF410 ELG761* ELD395* 1/4" 1-3/4" #3 phillips 3/16" 3-1/ 2"ELF420 ELG791* ELD405* 1/4" 2-1/4" #3 phillips 3/16" 4-1/2"
ELF430 ELG821* ELD415* 1/4" 2-3/4" #3 phillips 3/16" 4-1/ 2"ELF440 ELG851* ELD425* 1/4" 3-1/4" #3 phillips 3/16" 5-1/2"
ELF450 ELG881* ELD435* 1/4" 3-3/4" #3 phillips 3/16" 5-1/ 2"ELF460 ELD445* 1/4" 4" #3 phillips 3/16" 5-1/2"
ELF470 1/4" 5" #3 phillips 3/16" 6-1/2"
ELF480 1/4" 6" #3 phillips 3/16" 7-1/ 2"ELG941* 5/16" 2-1/4" #4 phillips 1/4" 4-1/ 2"
ELG948* 5/16" 2-3/4" #4 phillips 1/4" 4-1/ 2"ELG960* 5/16" 3-1/4" #4 phillips 1/4" 4-1/2"
ELG979* 5/16" 4" #4 phillips 1/4" 5-1/2"ELG992* 5/16" 5" #4 phillips 1/4" 7-1/ 2"
ELG998* 5/16" 6" #4 phillips 1/4" 7-1/2"
NOTE: All anchors are packed 100/ box with tanged drill bit, unless packed bulk as indicated with *.
-
7/27/2019 Constr Catalog Web
20/31
21For product or ordering information, call 1.800.435.7213 (USA and Canada)
Ult raCon M asonry Fast enersOffers optimal performance in concrete, brick and hollow block applications
NOTE: All anchors are packed 100/ box with tanged drill bit, unless packed bulk as indicated with *. Six boxes per carton.
Catalog Number (By Finish)
Dia. Lengt h Drive Syst em
Tanged Bit
Blue Silver Whit e Dia. Lengt h
Hex Flange Head (5/ 8" O.D.)
ELC145* ELD275* 1/4" 1-3/4" 5/16" hex 3/16" 3-1/ 2" ELC151* ELD285* 1/4" 2-1/4" 5/16" hex 3/16" 4-1/ 2"
ELC160* ELD295* 1/4" 2-3/4" 5/16" hex 3/16" 4-1/ 2"
ELC170* ELD305* 1/4" 3-1/4" 5/16" hex 3/16" 5-1/ 2"Hex Head with Oversized Washer (.54 0" O.D.)
ELG481* 5/16" 1-3/4" 5/16" hex 1/4" 4-1/ 2" ELG486* 5/16" 2-1/4" 5/16" hex 1/4" 4-1/ 2"
ELG491* 5/16" 2-3/4" 5/16" hex 1/4" 4-1/ 2" ELG496* 5/16" 3-1/4" 5/16" hex 1/4" 5-1/ 2"
ELG501* 5/16" 3-3/4" 5/16" hex 1/4" 5-1/ 2" ELG506* 5/16" 4" 5/16" hex 1/4" 5-1/ 2"
ELG511* 5/16" 5" 5/16" hex 1/4" 7-1/ 2"
ELG516* 5/16" 6" 5/16" hex 1/4" 7-1/ 2"TrimFit Flat Head (.415" O.D. nom.)
ELG771* ELD400* 1/4" 1-3/4" #4 phillips 3/16" 3-1/ 2" ELG801* ELD410* 1/4" 2-1/4" #4 phillips 3/16" 4-1/ 2"
ELG831* ELD420* 1/4" 2-3/4" #4 phillips 3/16" 4-1/ 2" ELG861* ELD430* 1/4" 3-1/4" #4 phillips 3/16" 5-1/ 2"
ELG891* ELD440* 1/4" 3-3/4" #4 phillips 3/16" 5-1/ 2"
ELG921* 1/4" 4" #4 phillips 3/16: 5-1/ 2" ELG945* 5/16" 2-1/4" #4 phillips 1/4" 4-1/ 2"
ELG955* 5/16" 2-3/4" #4 phillips 1/4" 4-1/ 2" ELG965* 5/16" 3-1/4" #4 phillips 1/4" 5-1/ 2"
ELG972* 5/16" 3-3/4" #4 phillips 1/4" 5-1/ 2"
ELG976* 5/16" 4" #4 phillips 1/4" 5-1/ 2" ELG991* 5/16" 5" #4 phillips 1/4" 7-1/ 2"
TrimFit Hex Head (.415 nom. washer O.D.)
ELG482* 5/16" 1-3/4" 5/16" hex 1/4" 4-1/ 2"
ELG487* 5/16" 2-1/4" 5/16" hex 1/4" 4-1/ 2" ELG492* 5/16" 2-3/4" 5/16" hex 1/4" 4-1/ 2"
ELG497* 5/16" 3-1/4" 5/16" hex 1/4" 5-1/ 2" ELG502* 5/16" 3-3/4" 5/16" hex 1/4" 5-1/ 2"
See page 24 of this catalog for more details.
Flex Technology heat treatment provides dual hardness zones:Lead threads are extremely hard for more efficient and
effective thread tappingThe lower hardness of the rest of the fastener renders itvirtually immune to brittle failures
Installs using standard ANSI masonry drill bits
Silver Stalgard finish provides exceptional corrosion resistance
Locking serrations under the head provide back-out resistance
Provides high pull-out and shear values
A Large Diameter M asonry ScrewVirt ually Immune To Brit t le Failures
-
7/27/2019 Constr Catalog Web
21/31
22 For product or ordering information, call 1.800.435.7213 (USA and Canada)
UltraCon Masonry Fastening SystemOffers optimal performance in concrete, brick and hollow block applications
** For use with with rotary hammer drills and 1000 toolor specialty installation tools. Packaged one per tube,10 tubes per shipper.
Tanged Drill Bits*
Cat alog No. Diamet er Lengt h
ELT300 5/ 32" 3-1/2"
ELT310 5/ 32" 4-1/2"
ELT320 5/ 32" 5-1/2"
ELT405 3/16" 3-1/2"
ELT415 3/16" 4-1/2"
ELT425 3/16" 5-1/2"
ELT435 3/16" 6-1/ 2"
ELT445 3/16" 7-1/2"
ELT460 1/4" 4-1/2"
ELT465 1/4" 5-1/2"ELT475 1/4" 7-1/2"
* For use with hammer drill guns. Sold in tubes containing10 bits each.
Hex-coll ared SDS Carbide-t ipped Drill Bits * *
CatalogNo. Diamet er
OverallLength
FunctionalLength
ELT535 5/32" 5" 2"
ELT555 5/32" 7" 4"
ELT630 3/16" 5" 2"
ELT650 3/16" 7" 4"
Installat ion Tools Kits
CatalogNo. Descript ion Inst alls
Contents/Replacement Part s Descript ion
ELP100 1000 Toolall sizes and styles ofUltraCon anchors
ELY 100 Drill Adapter
ELY 110 Drive Sleeve Assembly
ELY 120 5/16" Hex Driver MagneticELY 130 1/4" Hex Socket for 3/16" Anchor
ELY 160 Phillips Adapter
ELY 140 #2 Phillips Bit
ELY 150 #3 Phillips Bit
ELY 220 1/ 8" Hex Key
ELY 210 Set Screw 1/4-28
ELY 170 Drive Sleeve Assembly for 5" & 6" Anchors
ELP 150Specialty
Tool
1/ 4" diameter hex washerhead UltraCon anchors, up
through 1-3/4" in length
ELP 155 Drive Sleeve
ELT 630 Hex-collared Carbide-Tipped SDS Bit
ELY100 Drill Adapter
ELP250 Economy ToolUltraCon anchors up to 4"
in length
ELY 100 Drill Adapter
ELY 140 #2 Phillips Bit
ELY 150 #3 Phillips Bit
ELY 220 1/ 8" Hex Key
ELY 125 1/4" Hex Drive Adapter
Intended for use with hammer drills
-
7/27/2019 Constr Catalog Web
22/31
23For product or ordering information, call 1.800.435.7213 (USA and Canada)
Crete-Flex SS4 Masonry FastenersFor masonry attachments requiring enhanced corrosion resistance
Crete-Flex 410 stainless steel masonry fasteners provide high shearvalues, corrosion resistance and ductility for outstanding performance.
SpecificationsDiameters: #14 and 3/16"
Lengths: 1-1/ 4" to 6"
Thread Style: 14-10 heavy-duty
Head Styles: Hex washer, hexflange and flat
Drive Systems: Hex and phillips
Material: 410 stainless steel
Finish: Silver Stalgard coating
Features & Benefit s
Special heat treatment to protectinherent corrosion resistance of
the 410 stainless steel materialStalgard coating provides 1600hours of salt spray resistance
Larger .201 root diameter providesexceptionally high shear values
Note: All fasteners are packed 100 per box, 5 boxes per shipper with the exception of 5" and 6" lengths
Cat alog No. Lengt h Drive Syst em Drill Bit Size
#1 4 Diamet er, Hex Washer Head (.425 " washer O.D)
EMF310 1-1/ 4" 5/ 16" hex 7/ 32 x 4-1/ 2"
EMF330 1-3/ 4" 5/ 16" hex 7/ 32 x 4-1/ 2"EMF350 2-1/ 4" 5/ 16" hex 7/ 32 x 4-1/ 2"
EMF370 2-3/ 4" 5/ 16" hex 7/ 32 x 4-1/ 2"
EMF390 3-1/ 4" 5/ 16" hex 7/ 32 x 5-1/ 2"
EMF410 3-3/ 14" 5/ 16" hex 7/ 32 x 5-1/ 2"
EMF430 4" 5/ 16" hex 7/ 32 x 5-1/ 2"
EMF450 5" 5/ 16" hex 7/ 32 x 7-1/ 2"
EMF470 6" 5/ 16" hex 7/ 32 x 7-1/ 2"
#1 4 Diamet er, Phllips Flat Head
EMF690 1-1/ 4" #3 phillips 7/ 32 x 4-1/ 2"
EMF710 1-3/ 4" #3 phillips 7/ 32 x 4-1/ 2"
EMF730 2-1/ 4" #3 phillips 7/ 32 x 4-1/ 2"
EMF750 2-3/ 4" #3 phillips 7/ 32 x 4-1/ 2"
EMF770 3-1/ 4" #3 phillips 7/ 32 x 5-1/ 2"EMF790 3-3/ 14" #3 phillips 7/ 32 x 5-1/ 2"
EMF810 4" #3 phillips 7/ 32 x 5-1/ 2"
EMF830 5" #3 phillips 7/ 32 x 7-1/ 2"
EMF850 6" #3 phillips 7/ 32 x 7-1/ 2"
#1 4 Diameter, Hex Flange Head (5/ 8" washer O.D.)
EMF340 1-3/ 4" 5/ 16" hex 7/ 32 x 4-1/ 2"
EMF360 2-1/ 4" 5/ 16" hex 7/ 32 x 4-1/ 2"
3/ 16" Diameter, Phil l ips Flat Head
EMF610 1-1/ 4" #3 phillips 5/ 32 x 4-1/ 2"
EMF620 1-3/ 4" #3 phillips 5/ 32 x 4-1/ 2"
EMF630 2-1/ 4" #3 phillips 5/ 32 x 4-1/ 2"
EMF640 2-3/ 4" #3 phillips 5/ 32 x 4-1/ 2"
EMF650 3-1/ 4" #3 phillips 5/ 32 x 5-1/ 2"
Masonry Drill Bits
Cat . No. Descript ion M ax. Cret e-Flex Anchor Lengt h
EMC100 7/ 32 x 4-1/ 2" Tanged 2-3/ 4"
EMC110 7/ 32 x 5-1/ 2" Tanged 4"
EMC115 7/ 32 x 7-1/ 2" Tanged 6"
EMC120 7/ 32 x 5-1/ 2" Hex-shanked SDS 2-1/ 4"
EMC130 7/ 32 x 7" Hex-shanked SDS 4"
EMC140 7/ 32 x 6 x 8-1/ 4" SDS** 5"
EMC150 7/ 32 x 9 x 11" SDS** 6"
* Diameter Information:O.D. = #14 (.268");I.D. = .201"
** EMC140 andEMC150 drill bitsare NOT shanked
-
7/27/2019 Constr Catalog Web
23/31
24 For product or ordering information, call 1.800.435.7213 (USA and Canada)
Con-Flex Large Diamet er Concret e Screw AnchorsEnhanced ductility allows use in demanding exterior applications
Features & BenefitsFlex Technology heat treatmentallows virtual immunity to brittle
failuresLocking serrations under the headprovide back-out resistance
Hardened tip ensures efficienttapping into concrete
Head markings (Elco logo andlength in inches) allow easyinspection
Install with standard ANSI bits
SpecificationsDiameters: Oversized 3/8" and1/ 2" diameters
Material: Alloy steelHead Style: Hex washer head withlocking serrations
Thread Style: Double-lead
Finish: Silver Stalgard corrosion-resistant coating
Tensile Yield: 92,000 KSI min.(Grade 5); Tensile Ultimate:120,000 KSI min. (Grade 5)
Con-Flexmasonry screws are engineered to provide high pull-out and shearvalues with virtual immunity to brittle failures.
Cat alog No. Lengt h Thread Lengt h Drive Size Drill Bit Size Quant it y Per Box
3/ 8" Diameter, Hex Washer Head with Locking SerrationsEMR215 2-1/2" 2-1/4" 9/16" hex 3/ 8" 50
EMR235 3" 2-1/4" 9/16" hex 3/ 8" 50
EMR255 4" 3-1/ 2" 9/16" hex 3/ 8" 50
EMR265 5" 3-1/ 2" 9/16" hex 3/ 8" 25
EMR285 7-1/2" 3-1/ 2" 9/16" hex 3/ 8" 25
1/ 2" Diameter, Hex Washer Head with Locking Serrations
EMR320 2-1/2" 2-1/4" 3/4" hex 7/16" 50
EMR340 3" 2-1/4" 3/4" hex 7/16" 50
EMR360 4" 3-1/ 2" 3/4" hex 7/16" 50
EMR370 5" 3-1/ 2" 3/4" hex 7/16" 25
EMR380 6" 3-1/ 2" 3/4" hex 7/16" 25
-
7/27/2019 Constr Catalog Web
24/31
25For product or ordering information, call 1.800.435.7213 (USA and Canada)
Aggre-Gator 300 Series Stainless Bi-Metal Masonry FastenersThe corrosion resistance of 300 series stainless steel in a threaded concrete anchor
Aggre-gator anchors provide unmatched corrosion resistance in demandingapplications, such as those in coastal or wet areas.
SpecificationsDiameter: 1/ 4"
Lengths: 1-3/4" to 4"
Head Styles: Hex washer andTrimFit flat
Drive Systems: Hex and phillips
Material: 300 (18-8) stainlesssteel head and shank with fusedand hardened steel tappingthreads and gimlet point
Finish: Silver-colored Stalgard GB(Galvanic Barrier) coating
Features & Benefit s
Long service life high in-placevalue over life of structure
High strength and ductility
Offers greater galvaniccompatibility in dissimilar metalapplications involving aluminum
Thread profile provides quickcutting and stability duringinstallation
Installs with 3/16" masonry drillbits
Cat alog No.* Leng t h Drive Syst em Quant it y Per Box Quant it y Per Keg*
1/ 4 Diameter, Hex Washer HeadEML315 1-3/4" 5/16" hex 50 2000
EML325 2-1/4" 5/16" hex 50 1500
EML335 2-3/4" 5/16" hex 50 1000
EML345 3-1/4" 5/16" hex 50 1000
EML365 4" 5/16" hex 50 500
1/ 4 Diameter, TrimFit Flast Head
EMM310 1-3/4" #3 phillips 50 2500
EMM320 2-1/4" #3 phillips 50 1500
EMM330 2-3/4" #3 phillips 50 1000
EMM340 3-1/4" #3 phillips 50 1000
EMM360 4" #3 phillips 50 500
* Standard packaging: 50 anchors and 1 tanged masonry bit per box/ six boxes per shipper.
Bulk Quantities: Packed in kegs as shown. Available upon request. Indicate Bulk Packaging by placing a B at the end of theElco Catalog Number. Bulk packaging does not include masonry bits.
300 series stainless
steel head and shank
Fused and hardenedsteel tapping threads
and gimlet point
Bi-Metal Technology Provides Unmatched Performance
Head and shank made of 300 series (18-8) stainless steel
alloy to provide unmatched corrosion resistance in yourtoughest applications
Fused and hardened steel tapping threads make installationeasy and hold tight in block and poured concrete
Coated overall with silver-colored Stalgard GB, a GalvanicBarrier to protect aluminum components from acceleratedcorrosion when in contact with 300 series stainless steel
-
7/27/2019 Constr Catalog Web
25/31
26 For product or ordering information, call 1.800.435.7213 (USA and Canada)
HangerMat e Threaded Rod Anchoring Syst emAnchoring system for threaded rod components
HangerMate anchors accept 1/4-20 and 3/8-16 threaded rod andcomponents of piping systems for attachment to steel, masonry, and wood.
Specifications
Sizes: For use with 1/4-20 and3/ 8-16 threaded rod; adaptor
installs 1/ 2" threaded rodLengths: 1-1/ 8" to 3"
Drive System: Hex
Material: Carbon steel
Finish: Plating per ASTM B633
Type II Class 12
Features & Benefits
Eases installation of sprinklersystems, strut, HVAC, cable trays
and various piping systemsSelf-drilling points for steel; inwood applications, no pre-drillingis required
Many styles UL listed and/or FMapproved
Installs with HangerMate Drive formost applications
Cat alog No. Descript ion Rod Size St eel Thick ness Quant it y/ Shipper
Steel Applications
Vertical M ount End-Drilled HeadEZG160 1/4-20X1 #3 point 1/4/20 .060 .250 300
EZG450 1/4-20X1 #2 point 3/ 8/16 .060 .125 300
EZG470 1/4-20X1 #3 point 3/ 8/16 .060 .250 300
EZG471 1/4-20X1 #3 point w/nuts 3/ 8/16 .060 .250 300
EZG490 1/4-20X1-1/2 #3 point 3/ 8/16 .060 .250 300
EZG491 1/4-20X1-1/ 2 #3 point w/nuts 3/ 8/16 .060 .250 300
EZG530 1/4-20X2 #3 point 3/ 8/16 .060 .250 300
EZG540 1/4-20X3 #3 point 3/ 8/16 .060 .250 300
EZG510 1/4-20X1-1/ 2 #5 point 3/ 8/16 .187 .500 300
EZG511 1/4-20X1-1/ 2 #5 point w/nuts 3/ 8/16 .060 .500 300
EZG610 1/4-20 collapsing insert 1/4/20 26 ga. .187" 300
EZG580 1/4-20X1; use with EZG610 3/ 8/16 26 ga. .187" 150
EZG590 1/4-20X1; use with EZG610 3/ 8/16 26 ga. .187" 150
EZG600 1/4-20X1; use with EZG610 3/ 8/16 26 ga. .187" 150
Horizontal M ount Cross-Drilled Head
EZH155 1/4-20X1 #3 point 1/4/20 .060 .250 300
EZH455 1/4-20X1 #2 point 3/ 8/16 .060 .125 300
EZH475 1/4-20X1 #3 point 3/ 8/16 .060 .250 300
EZH476 1/4-20X1 #3 point w/nuts 3/ 8/16 .060 .250 300
EZH495 1/4-20X1-1/2 #3 point 3/ 8/16 .060 .250 300
EZH496 1/4-20X1-1/ 2 #3 point w/nuts 3/ 8/16 .060 .250 300
EZH515 1/4-20X1-1/2 #5 point 3/ 8/16 .187 .500 300
EZH516 1/4-20X1-1/ 2 #5 point w/nuts 3/ 8/16 .060 .500 300
EZH535 1/4-20X2 #3 point 3/ 8/16 .060 .250 300
Note: 50 per box and 300 (6 boxes) per shipper.
-
7/27/2019 Constr Catalog Web
26/31
27For product or ordering information, call 1.800.435.7213 (USA and Canada)
HangerMat e Threaded Rod Anchoring Syst emAnchoring system for threaded rod components
Cat alog No. Descript ion Rod Size Qt y/ Shipper
Wood Applications
Vertical M ount End-Drilled Head
EZG315 5/16X2-1/4 1/4/ 20 300
EZG650 5/16X2-1/4 3/ 8/16 300
EZG670 5/16X3 3/ 8/16 300
Horizontal M ount Cross-Drilled Head
EZH320 5/16X2-1/4 1/4/ 20 300
EZH665 5/16X2-1/4 3/ 8/16 300
Concrete Applications
Vertical M ount End-Drilled Head
EZG365 5/16X2-1/4 1/4/ 20 300
EZG730 5/16X2-1/4 3/ 8/16 300
Horizontal M ount Cross-Drilled Head
EZH370 5/16X2-1/4 1/4/ 20 300
EZH735 5/16X2-1/4 3/ 8/16 300
Steel, Wood or Concrete (HangerMate MP anchors)
Vertical M ount End-Drilled Head
EZG910 1/4-10X2 1/4/ 20 300
EZG930 1/4-10X2 3/ 8/16 300
Horizontal M ount Cross-Drilled Head
EZH935 1/4-10X2 3/ 8/16 300
All Mat erials Adapter for Hanging 1/ 2" Rod
EZE270 1/ 2/13 150
Simply install any 3/ 8" HangerMate anchor as required, then thread EZE270 adapter into it.
HangerMate Installation Tools
Cat alog No. Descript ion
EZE215 Drive Socket (for steel and wood applications)
EZE220 Drive Sleeve (for concrete applications)
EZE240 Drill Bit Adapter Kit
EZE320 Collared 25/64 Drill Bit (for HangerMate LG applications)
EZE340 ANSI 1/ 4" Tanged Drill Bit for Hammer Drills
EZE350 ANSI 1/4" SDS Drill Bit for Rotary Hammer Drills
EZE360 .234" Tanged Drill Bit for Hammer Drills
EZE380 .234" SDS Drill Bit for Rotary Hammer DrillsEZE290 Setting Tool for EZG580/EZG590/EZG600/EZG610 components
-
7/27/2019 Constr Catalog Web
27/31
28 For product or ordering information, call 1.800.435.7213 (USA and Canada)
PanelMate Hurricane Panel Anchoring SystemThe quick, economical method to secure hurricane protection
formerly sold as Cat#ENX320 formerly sold as Cat#ENX328 * formerly sold as ENX322
Features & BenefitsFasteners accept standard 1/ 4-20hardware
Provide exceptional pull-out andshear values
Provide outstanding corrosionresistence (withstands 800 1000 hours in salt spray testingper ASTM B117 standards)
Tested to tough Miami-Dadehurricane standards
PanelMate fasteners offer one-time installation the anchors stay in place,ready for even faster and easier panel mounting as the next storm approaches
SpecificationsStyles: Double-ended studs(accept standard 1/4-20 nuts);
anchor with Internally-threadedhead (accepts standard 1/ 4-20hardware); hex fasteners andinternally-threaded inserts
Thread Style: Oversized 14-10V-notched threads (.270 O.D.)
Materials: Carbon steel and 18-8stainless steel
Finish: Carbon steel designs haveStalgard coating
Descript ionCatalog
No.1 / 4 -20 S t ud
Thread Lengt hAnchorLength
14 -10 FastenerThread Lengt h M at erial Finish
Qty./ Box
PanelMate Pro Anchors
Double-ended
studs withstop collar
(acceptstandard1/4-20nuts)
ENT220 5/ 8" 2-1/4" 2" carbon steel Silver Stalgard 500
ENT320 5/ 8" 3-1/4" 3" carbon steel Silver Stalgard
ENT225* 7/ 8" 2-1/4" 2" carbon steel Silver Stalgard 800
ENT226 7/ 8" 2-1/4" 2" stainless steel Passivated 800
ENT325 7/ 8" 3-1/4" 3" carbon steel Silver Stalgard 500
ENT326 7/ 8" 3-1/4" 3" stainless steel Passivated 500
ENT450 7/ 8" 4-1/ 2" 3" carbon steel Silver Stalgard 250
ENT451 7/ 8" 4-1/ 2" 3" stainless steel Passivated 250
ENT550 7/ 8" 5-1/ 2" 3" carbon steel Silver Stalgard 250
ENT551 7/ 8" 5-1/ 2" 3" stainless steel Passivated 250
Descript ion
Catalog
No. Overall Anc hor Lengt h
14 -10 Fastener
Thread Lengt h M at erial Finish
Qty.
/ BoxPanelMat e Female ID (Int ernal Drive) Anchors
Internally-threadedheadacceptsstandard1/4-20hardware
ENW260 2-5/ 8" 1-3/ 4" carbon steel fastener with stainless steel head Silver Stalgard 1000
ENW261 2-5/ 8" 1-3/4" stainless steel Passivated 1000
ENW300 2-5/ 8" 1-3/4" all carbon steel Silver Stalgard 500
ENW325 3-1/ 4" 2" carbon steel fastener with stainless steel head Silver Stalgard 500
ENW326 3-1/4" 2" stainless steel Passivated 500
ENW450 4-1/ 2" 3" carbon steel fastener with stainless steel head Silver Stalgard 500
ENW451 4-1/ 2" 3" stainless steel Passivated 500
ENW550 5-1/ 2" 3" carbon steel fastener with stainless steel head Silver Stalgard 500
ENW551 5-1/ 2" 3" stainless steel Passivated 500
Descript ionCatalog
No.1 / 4 -20 S t ud
Thread Lengt hAnchorLength
14 -10 FastenerThread Lengt h M at erial Finish
Qty./ Box
PanelMate Plus AnchorsDouble-
ended studs(no washer
or stopcollar)
ENX383 1-1/4" 2-1/4 2-1/ 8 carbon steel Silver Stalgard 1000
ENX384 1-1/4" 2-1/4 2-1/ 8 carbon steel White Stalgard 300
ENX400 1-1/4" 2-1/4 2-1/ 8 stainless steel Passivated 1000
-
7/27/2019 Constr Catalog Web
28/31
29For product or ordering information, call 1.800.435.7213 (USA and Canada)
Masonry Drill Bits
Cat alog No. Descript ion Funct ional Lengt h
Tanged Masonry Drill Bits
EMC100 7/ 32 x 4-1/ 2" tanged masonry drill bit 3"
EMC110 7/ 32 x 5-1/ 2" tanged masonry drill bit 4"EMC115 7/ 32 x 7-1/ 2" tanged masonry drill bit 6"
EMC116 7/ 32 x 13" hex stem masonry drill bit 11-1/ 2"
SDS Hex Shanked Masonry Dri l l Bits* * *
EMC120 7/ 32 x 5-1/ 2" SDS masonry drill bit 2-1/ 4"
EMC130 7/ 32 x 7" SDS masonry drill bitx 4"
EMC140 7/ 32 x 8 1/ 4" SDS masonry drill bit 5"
EMC150 7/ 32 x 11" SDS masonry drill bit 6"
Dril l Bit Adaptor
ELY1OO Tanged drill bit adapter ( 1/8" hex key included) NA
Drive Sockets and Sleeves
Cat alog No. Des cr ipt ion
ELY110 Drive sleeve adaptor
ENY140 Economy drive sleeve for PanelMatePlus anchorsENY156 PanelMatePro heavy duty modified 3/16" drive socket***
ENY165 Back-up driver with internal 1/4-20 threads
ENY190 5/16" hex drive tool 2" length
ENY192 5/16" hex drive tool 3" length
ENY194 5/16" hex drive tool 4" length
PanelMate Hurricane Panel Anchoring SystemThe quick, economical method to secure hurricane protection
DescriptionCatalog
No.1 / 4 -20 S t ud
Thread Lengt hAnchorLength
14 -10 FastenerThread Lengt h M at erial Finish
Qty./ Bo x
PanelMat e TVAS* * Pro Anchors
Double-ended studs
ENT737 7/ 8" 7-3/ 8" 3" carbon steel Silver Stalgard 400
ENT738 7/ 8" 7-3/ 8" 3" stainless steel Passivated 400
Description CatalogNo. Overal l Anc hor Leng th 14 -10 FastenerThread Lengt h M at erial Finish Qty./ Bo x
PanelMat e TVAS* * Female Anchors
Internally-threaded
head
ENW737 7-3/ 8" 3" carbon steel Silver Stalgard 300
ENW738 7-3/ 8" 3" stainless steel Passivated 300
DescriptionCatalog
No. Overal l Anc hor Leng th14 -10 FastenerThread Lengt h M at erial Finish
Qty./ Bo x
PanelMate TVAS* * Hex Anchors
Hex headscrew
ENX335 7-3/ 8" (below head) 3" carbon steel Silver Stalgard 400
DescriptionCatalog
No. Overal l Anc hor Leng th14 -10 FastenerThread Lengt h M at erial Finish
Qty./ Bo x
PanelMate L Inserts
Internally-threaded
insertENX305 2-1/ 8" N/ A carbon steel
Silver Stalgardand nylon
locking patch500
PanelMate S Inserts
Internally-threaded
insertENX310 1-5/ 8 N/ A carbon steel Silver Stalgard 1000
** Through-Veneer Anchoring System
***ENY 156 drive socket is specially-sized.
-
7/27/2019 Constr Catalog Web
29/31
30 For product or ordering information, call 1.800.435.7213 (USA and Canada)
RapidSet ToolsThe fastest, easiest and most reliable way to install machine screw (calk-in) anchors
Features & BenefitsPower tool does all the work, nopounding with setting tools
Automatically sets anchor justbelow the surface
Maximizes expansion of bottomportion of lead sleeve whichresults in consistently highpull-out values
SpecificationsFor calk-in anchor sizes #10, 1/4"and 3/8"
Designed for use with power tools,including battery impact drivers
MAXX model allows placement of1/ 4" anchors at various depths(up to 2) below the surface
Efficient RapidSet tools eliminate clumsy hammer and setting processesor expensive, slow expander tools.
Cat alog No. For Inser t -Anchor Size
Standard RapidSet tool
EZB790 #10-24
EZB800 1/ 4-20
EZB820 3/ 8-16
RapidSet MAXX tool
EZB810 1/ 4-20
The Corrosion Resistance of300 Series St ainless St eel and theEfficiency of Drillscrews
See page 16 of this catalog for more details.
Features
Bi-metal technology 300 (18-8) stainless steel head and shank
Fused and hardened steel drill point
Silver-colored Stalgard GB coating
Wide variety of sizes and head styles
Benefits
Outstanding corrosion resistance and long service lifeHigh strength, ductility and reliability
Virtually immune to delayed embrittlement failures
Greater galvanic compatibility in dissimilar metal applicationsinvolving aluminum
300 seriesstainless
steel headand shank
Fused andhardened
steeltapping
threads anddrill point
Note: Rapid-Settools draw the anchors internal insert up into the anchors outer sleeve; this installation process eliminates theneed to maintain a back bearing surface (required by hammer setting tools).
-
7/27/2019 Constr Catalog Web
30/31
Notes
-
7/27/2019 Constr Catalog Web
31/31
Elco, Aggre-gator, Bi-Flex, Crete-Flex, Dril-Flex, Drilltite, Fab-Lok, Flex Technology, Flo-Seal, HangerMate, Stalgard, Tapfast,
Elco Construction Products1.800.435.7213 (USA & Canada)
www.elcoconstruction.com
Proud Member of:
Warranty and Limitat ion of Liabilit y:All warranties of the Elco products, expressed or implied,including the warranties of merchantability and fitness for
particular purposes are specifically excluded for the following:Elco will repair any product which, within twelve months after
sales by Elco Construction Products or its distributors, is
found by Elco to be defective in material or workmanship-- normal wear and tear excepted. This is the sole warranty ofElco Construction Products and the sole remedy available todistributor or buyer. Elco shall not be liable for any injury, lossof damage, direct, incidental or consequential, arising from
use of, or the inability to use, any Elco product.
Elco Construction Products has strived for total accuracythroughout this catalog. However, Elco Construction Products
shall not be liable or responsible for any typographicalerrors or changes in product offering that may occur. If anyquestions arise as to the accuracy of this catalog, please
contact us at 1-800-435-7213.
August 2008
top related