conforms to regulation (ec) no. 1907/2006 (reach),...
Post on 09-Mar-2018
215 Views
Preview:
TRANSCRIPT
PURITY TM FG WO WHITE MINERAL OIL 10
SAFETY DATA SHEET
Product name
PURITY TM FG WO WHITE MINERAL OIL 10
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - Europe
:
Not available.Other means ofidentification
:
1.1 Product identifier
1.3 Details of the supplier of the safety data sheet
CAS number : 8042-47-5
Product description : Purity FG WO White Mineral Oil 10 is a highly refined white mineral oil intended forthe food processing industry.
This product complies with FDA 21 CFR 172.878 "White Mineral Oil" and 21 CFR178.3620(a) regulations for direct food contact.
1.2 Relevant identified uses of the substance or mixture and uses advised against
Manufacture of substance - IndustrialUse in Cleaning Agents - ConsumerMetal working fluids/rolling oils - IndustrialMetal working fluids/rolling oils - ProfessionalUse as binders and release agents - IndustrialUse as binders and release agents - ProfessionalUse in Agrochemicals uses - ProfessionalUse in Agrochemicals uses - ConsumerRubber production and processing - IndustrialPolymer processing - IndustrialUse as an intermediate - IndustrialLubricants - IndustrialLubricants (Low release) - ProfessionalLubricants (high release) - ProfessionalLubricants (Low release) - ConsumerLubricants (high release) - ConsumerUse in laboratories - IndustrialUse in laboratories - ProfessionalWater treatment chemicals - IndustrialWater treatment chemicals - ProfessionalExplosives manufacture and use - ProfessionalDistribution of substance - IndustrialFunctional Fluids - IndustrialFunctional Fluids - ProfessionalOther Consumer Uses - ConsumerFormulation and (re)packing of substances and mixtures - IndustrialUses in Coatings - IndustrialUses in Coatings - ProfessionalUses in Coatings - ConsumerUse in Cleaning Agents - IndustrialUse in Cleaning Agents - Professional
Identified uses
SECTION 1: Identification of the substance/mixture and of thecompany/undertaking
REACH Registration numberEC number : 232-455-8
Registration number Legal entity
Product code : PFWO10
01-2119487078-27-0010 -
Page: 1/43Date of issue : 4/25/2016. Internet: lubricants.petro-canada.ca/msdsA Suncor business TM Trademark of Suncor Energy Inc. Used under licence.
PURITY TM FG WO WHITE MINERAL OIL 10Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - Europe
SECTION 1: Identification of the substance/mixture and of thecompany/undertaking
Not applicable.Information limitations :
e-mail address of personresponsible for this SDS
: EUSDS@suncor.com
National contact
1.4 Emergency telephone numberNational advisory body/Poison Centre
:Telephone numberSupplier
Telephone number :
Hours of operation :
Suncor Energy: (001) 403-296-3000Canutec Transportation: (001) 613-996-6666Poison Control Centre: Consult local telephone directory for emergency number(s).
Petro-Canada Europe Lubricants LimitedWellington House, Starley WayBirmingham International ParkSolihullB37 7HB, United KingdomTel: +44 (0) 121 781 7264Fax: +44 (0) 121 781 7401
Not applicable.
Not applicable.
24-hours
Petro-Canada Lubricants Inc.2310 Lakeshore Road WestMississauga, OntarioCanada L5J 1K2
:
:
Manufacturer
Supplier
See Section 11 for more detailed information on health effects and symptoms.
Classification according to Regulation (EC) No. 1272/2008 [CLP/GHS]
SECTION 2: Hazards identification2.1 Classification of the substance or mixture
Product definition : Mono-constituent substance
See Section 16 for the full text of the H statements declared above.
2.2 Label elementsHazard pictograms :
Signal word :Hazard statements :
Prevention :Precautionary statements
Response :
Storage :Disposal :
DangerMay be fatal if swallowed and enters airways.
Not applicable.IF SWALLOWED: Immediately call a POISON CENTER or physician. Do NOTinduce vomiting.Store locked up.Dispose of contents and container in accordance with all local, regional, national andinternational regulations.
Supplemental labelelements
: Not applicable.
2.3 Other hazards
Asp. Tox. 1, H304
Page: 2/43Date of issue : 4/25/2016. Internet: lubricants.petro-canada.ca/msdsA Suncor business TM Trademark of Suncor Energy Inc. Used under licence.
PURITY TM FG WO WHITE MINERAL OIL 10Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - Europe
SECTION 2: Hazards identification
:Other hazards which donot result in classification
Not available.
Substance meets thecriteria for PBT accordingto Regulation (EC) No.1907/2006, Annex XIII
: No.P: Not available. B: Not available. T: No.
Substance meets thecriteria for vPvB accordingto Regulation (EC) No.1907/2006, Annex XIII
: Not available.
White mineral oil REACH #: 01-2119487078-27-0010EC: 232-455-8CAS: 8042-47-5
100 Not classified. [A]
Substance/mixture Mono-constituent substance
Occupational exposure limits, if available, are listed in Section 8.
:
IdentifiersProduct/ingredientname
SECTION 3: Composition/information on ingredients
% TypeRegulation (EC) No. 1272/2008 [CLP]
Classification
See Section 16 for the full text of the Hstatements declared above.
[A] Constituent[B] Impurity[C] Stabilising additive
Type
There are no additional ingredients present which, within the current knowledge of the supplier, are classified andcontribute to the classification of the substance and hence require reporting in this section.
Get medical attention immediately. Call a poison center or physician. Wash outmouth with water. Remove dentures if any. Remove victim to fresh air and keep atrest in a position comfortable for breathing. If material has been swallowed and theexposed person is conscious, give small quantities of water to drink. Stop if theexposed person feels sick as vomiting may be dangerous. Aspiration hazard ifswallowed. Can enter lungs and cause damage. Do not induce vomiting. Ifvomiting occurs, the head should be kept low so that vomit does not enter the lungs.Never give anything by mouth to an unconscious person. If unconscious, place inrecovery position and get medical attention immediately. Maintain an open airway.Loosen tight clothing such as a collar, tie, belt or waistband.
Skin contact
Immediately flush eyes with plenty of water, occasionally lifting the upper and lowereyelids. Check for and remove any contact lenses. Continue to rinse for at least 10minutes. Get medical attention if irritation occurs.
Flush contaminated skin with plenty of water. Remove contaminated clothing andshoes. Get medical attention if symptoms occur. Wash clothing before reuse.Clean shoes thoroughly before reuse.
4.1 Description of first aid measures
Remove victim to fresh air and keep at rest in a position comfortable for breathing. Ifnot breathing, if breathing is irregular or if respiratory arrest occurs, provide artificialrespiration or oxygen by trained personnel. It may be dangerous to the personproviding aid to give mouth-to-mouth resuscitation. Get medical attention if adversehealth effects persist or are severe. If unconscious, place in recovery position andget medical attention immediately. Maintain an open airway. Loosen tight clothingsuch as a collar, tie, belt or waistband.
Ingestion
Inhalation
Eye contact
:
:
:
:
Protection of first-aiders : No action shall be taken involving any personal risk or without suitable training. Itmay be dangerous to the person providing aid to give mouth-to-mouth resuscitation.
SECTION 4: First aid measures
Page: 3/43Date of issue : 4/25/2016. Internet: lubricants.petro-canada.ca/msdsA Suncor business TM Trademark of Suncor Energy Inc. Used under licence.
PURITY TM FG WO WHITE MINERAL OIL 10Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - Europe
SECTION 4: First aid measures
Notes to physician Treat symptomatically. Contact poison treatment specialist immediately if largequantities have been ingested or inhaled.
:
Specific treatments
4.2 Most important symptoms and effects, both acute and delayedPotential acute health effects
Inhalation : No known significant effects or critical hazards.
May be fatal if swallowed and enters airways.:IngestionSkin contact : No known significant effects or critical hazards.
No known significant effects or critical hazards.:Eye contact
Over-exposure signs/symptoms
Skin contactIngestion
Inhalation No specific data.
Adverse symptoms may include the following:nausea or vomiting
Repeated skin exposure can produce local skin destruction or dermatitis.
:
::
Eye contact : No specific data.
4.3 Indication of any immediate medical attention and special treatment needed
No specific treatment.:
Promptly isolate the scene by removing all persons from the vicinity of the incident ifthere is a fire. No action shall be taken involving any personal risk or without suitabletraining.
Hazardous combustionproducts
Hazards from thesubstance or mixture
Carbon oxides (CO, CO2), smoke and irritating vapours as products of incompletecombustion.
In a fire or if heated, a pressure increase will occur and the container may burst.
Fire-fighters should wear appropriate protective equipment and self-containedbreathing apparatus (SCBA) with a full face-piece operated in positive pressuremode. Clothing for fire-fighters (including helmets, protective boots and gloves)conforming to European standard EN 469 will provide a basic level of protection forchemical incidents.
Special protectiveequipment for fire-fighters
Use an extinguishing agent suitable for the surrounding fire.Foam (Specifically trained personnel only)Water fog (Specifically trained personnel only)Dry chemical powderCarbon dioxide.Other inert gases (subject to regulations)Sand or earth
5.1 Extinguishing media
:
:
:
Do not pressurise, cut, weld, braze, solder, drill, grind or expose containers to heat orsources of ignition.
Additional information :
Do not use direct water jets on the burning product; they could cause splattering andspread the fire.Simultaneous use of foam and water on the same surface is to be avoided as waterdestroys the foam.
Suitable extinguishingmedia
:
Unsuitable extinguishingmedia
:
SECTION 5: Firefighting measures
5.2 Special hazards arising from the substance or mixture
5.3 Advice for firefightersSpecial precautions forfire-fighters
:
Page: 4/43Date of issue : 4/25/2016. Internet: lubricants.petro-canada.ca/msdsA Suncor business TM Trademark of Suncor Energy Inc. Used under licence.
PURITY TM FG WO WHITE MINERAL OIL 10Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - Europe
6.2 Environmentalprecautions
Stop leak if without risk. Move containers from spill area. Approach the releasefrom upwind. Prevent entry into sewers, water courses, basements or confinedareas. Wash spillages into an effluent treatment plant or proceed as follows.Contain and collect spillage with non-combustible, absorbent material e.g. sand,earth, vermiculite or diatomaceous earth and place in container for disposalaccording to local regulations (see section 13). Dispose of via a licensed wastedisposal contractor. Contaminated absorbent material may pose the same hazardas the spilt product. Note: see section 1 for emergency contact information andsection 13 for waste disposal.
Avoid dispersal of spilt material and runoff and contact with soil, waterways, drainsand sewers. Inform the relevant authorities if the product has caused environmentalpollution (sewers, waterways, soil or air).
Large spill :
Stop leak if without risk. Move containers from spill area. Dilute with water and mopup if water-soluble. Alternatively, or if water-insoluble, absorb with an inert drymaterial and place in an appropriate waste disposal container. Dispose of via alicensed waste disposal contractor.
Small spill :6.3 Methods and materials for containment and cleaning up
SECTION 6: Accidental release measures6.1 Personal precautions, protective equipment and emergency procedures
For non-emergencypersonnel
:
For emergency responders :
6.4 Reference to othersections
See Section 1 for emergency contact information.See Section 8 for information on appropriate personal protective equipment.See Section 13 for additional waste treatment information.
No action shall be taken involving any personal risk or without suitable training.Evacuate surrounding areas. Keep unnecessary and unprotected personnel fromentering. Do not touch or walk through spilt material. Avoid breathing vapour ormist. Provide adequate ventilation. Wear appropriate respirator when ventilation isinadequate. Put on appropriate personal protective equipment.
If specialised clothing is required to deal with the spillage, take note of anyinformation in Section 8 on suitable and unsuitable materials. See also theinformation in "For non-emergency personnel".
:
:
Store in accordance with local regulations. Store in original container protected fromdirect sunlight in a dry, cool and well-ventilated area, away from incompatiblematerials (see section 10) and food and drink. Store locked up. Keep containertightly closed and sealed until ready for use. Containers that have been openedmust be carefully resealed and kept upright to prevent leakage. Do not store inunlabelled containers. Use appropriate containment to avoid environmentalcontamination.
SECTION 7: Handling and storageThe information in this section contains generic advice and guidance. The list of Identified Uses in Section 1 should beconsulted for any available use-specific information provided in the Exposure Scenario(s).
7.1 Precautions for safe handlingProtective measures :
Advice on generaloccupational hygiene
:
7.2 Conditions for safestorage, including anyincompatibilities
7.3 Specific end use(s)Recommendations : Not applicable
Put on appropriate personal protective equipment (see Section 8). Do not swallow.Avoid contact with eyes, skin and clothing. Avoid breathing vapour or mist. Keep inthe original container or an approved alternative made from a compatible material,kept tightly closed when not in use. Empty containers retain product residue and canbe hazardous. Do not reuse container.
Eating, drinking and smoking should be prohibited in areas where this material ishandled, stored and processed. Workers should wash hands and face beforeeating, drinking and smoking. Remove contaminated clothing and protectiveequipment before entering eating areas. See also Section 8 for additionalinformation on hygiene measures.
:
Page: 5/43Date of issue : 4/25/2016. Internet: lubricants.petro-canada.ca/msdsA Suncor business TM Trademark of Suncor Energy Inc. Used under licence.
PURITY TM FG WO WHITE MINERAL OIL 10Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - Europe
SECTION 7: Handling and storage:Industrial sector specific
solutionsNot available.
Product/ingredient name Exposure limit values
Recommended monitoringprocedures
White mineral oil ACGIH TLV (United States). Notes: (Mineral oil)TWA: 5 mg/m³, (Inhalable fraction) 8 hour(s).
Occupational exposure limits
If this product contains ingredients with exposure limits, personal, workplaceatmosphere or biological monitoring may be required to determine the effectivenessof the ventilation or other control measures and/or the necessity to use respiratoryprotective equipment. Reference should be made to European Standard EN 689 formethods for the assessment of exposure by inhalation to chemical agents andnational guidance documents for methods for the determination of hazardoussubstances.
Hand protection Chemical-resistant, impervious gloves complying with an approved standard shouldbe worn at all times when handling chemical products if a risk assessment indicatesthis is necessary. >8 hours (breakthrough time): neoprene, nitrile, Viton®.
Safety eyewear complying with an approved standard should be used when a riskassessment indicates this is necessary to avoid exposure to liquid splashes, mists,gases or dusts.
Eye/face protection
:
:
:
Skin protection
Appropriate engineeringcontrols
: No special ventilation requirements. Good general ventilation should be sufficient tocontrol worker exposure to airborne contaminants. If this product containsingredients with exposure limits, use process enclosures, local exhaust ventilation orother engineering controls to keep worker exposure below any recommended orstatutory limits.
Wash hands, forearms and face thoroughly after handling chemical products, beforeeating, smoking and using the lavatory and at the end of the working period.Appropriate techniques should be used to remove potentially contaminated clothing.Wash contaminated clothing before reusing. Ensure that eyewash stations andsafety showers are close to the workstation location.
8.2 Exposure controls
Hygiene measures :
Highly refined base oils DNEL Long term Dermal 220 mg/kgbw/day
Workers Systemic
DNEL Long termInhalation
160 mg/m³ Workers Systemic
DNEL Long term Dermal 92 mg/kgbw/day
Man via theenvironment
Systemic
DNEL Long termInhalation
35 mg/m³ Man via theenvironment
Systemic
DNEL Long term Oral 40 mg/kgbw/day
Man via theenvironment
Systemic
Product/ingredient name Exposure Value Population Effects
DNEL Summary : Long-term systemic effects include non-reproductive effects and developmental /reproductive effects. Lowest DNEL is shown.
Predicted effect concentrationsNo PECs available.
SECTION 8: Exposure controls/personal protectionThe information in this section contains generic advice and guidance. The list of Identified Uses in Section 1 should beconsulted for any available use-specific information provided in the Exposure Scenario(s).
8.1 Control parameters
Derived effect levels
Type
Individual protection measures
Page: 6/43Date of issue : 4/25/2016. Internet: lubricants.petro-canada.ca/msdsA Suncor business TM Trademark of Suncor Energy Inc. Used under licence.
PURITY TM FG WO WHITE MINERAL OIL 10Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - Europe
SECTION 8: Exposure controls/personal protection
Use a properly fitted, air-purifying or air-fed respirator complying with an approvedstandard if a risk assessment indicates this is necessary. Respirator selection mustbe based on known or anticipated exposure levels, the hazards of the product andthe safe working limits of the selected respirator. Recommended: organic vapourfilter
Respiratory protection :
Personal protective equipment for the body should be selected based on the taskbeing performed and the risks involved and should be approved by a specialistbefore handling this product.
:
Environmental exposurecontrols
: Emissions from ventilation or work process equipment should be checked to ensurethey comply with the requirements of environmental protection legislation. In somecases, fume scrubbers, filters or engineering modifications to the processequipment will be necessary to reduce emissions to acceptable levels.
Body protection :
Other skin protection Appropriate footwear and any additional skin protection measures should beselected based on the task being performed and the risks involved and should beapproved by a specialist before handling this product.
Not available.
Physical state
Melting point/freezing pointInitial boiling point and boilingrange
Vapour pressure
Relative densityVapour density
Solubility(ies)
Liquid.
Not available.
0.846 kg/L @ 15°C (59°F)Not available.Not available.
Insoluble in water.
Mild petroleum oil like.Odour
pH
Clear and brightColour
Evaporation rate Not available.
Auto-ignition temperature
Flash point
Not available.
Open cup: 190°C [Cleveland.]
Not available.
Do not pressurise, cut, weld, braze, solder, drill, grind or expose containers toheat or sources of ignition.
Not available.
Not available.
Viscosity 12.7 cSt @ 40°C (104°F)
Not available.Odour threshold
Partition coefficient: n-octanol/water
Upper/lower flammability orexplosive limits
Explosive properties
:
::
:
::
:
::
:
::
:
:
:
:
:
:
Not available.Oxidising properties :
9.1 Information on basic physical and chemical propertiesAppearance
9.2 Other information
Burning time Not applicable.Burning rate Not applicable.
::
Decomposition temperature : Not available.
SECTION 9: Physical and chemical properties
Flammability (solid, gas) : Low fire hazard. This material must be heated before ignition will occur.
No additional information.
Pour point -24°C (-11°F):
Page: 7/43Date of issue : 4/25/2016. Internet: lubricants.petro-canada.ca/msdsA Suncor business TM Trademark of Suncor Energy Inc. Used under licence.
PURITY TM FG WO WHITE MINERAL OIL 10Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - Europe
10.6 Hazardousdecomposition products
10.4 Conditions to avoid No specific data.
May release COx, smoke and irritating vapours when heated to decomposition.
The product is stable.10.2 Chemical stability
Reactive with oxidising agents.
:
:
:
10.5 Incompatible materials :
10.3 Possibility ofhazardous reactions
: Under normal conditions of storage and use, hazardous reactions will not occur.
SECTION 10: Stability and reactivity10.1 Reactivity : No specific test data related to reactivity available for this product or its ingredients.
Potential acute health effects
Acute toxicity
Highly refined base oils LC50 Inhalation Dusts andmists
Rat >5000 mg/m³ 4 hours
LD50 Dermal Rabbit >2000 mg/kg -LD50 Oral Rat >5000 mg/kg -
Product/ingredient name Result Species Dose Exposure
Conclusion/Summary : Not available.
CarcinogenicityConclusion/Summary : All components listed in Annex VI to which Note L applies, and contained in the
product, have been shown to contain less than 3% DMSO extractables as measuredby IP346.
MutagenicityConclusion/Summary : Not available.
TeratogenicityConclusion/Summary : Not available.
Reproductive toxicityConclusion/Summary : Not available.
Irritation/CorrosionConclusion/Summary : Not available.
SensitisationConclusion/Summary : Not available.
Routes of entry anticipated:Oral, Dermal, Inhalation.
SECTION 11: Toxicological information11.1 Information on toxicological effects
Specific target organ toxicity (single exposure)
Specific target organ toxicity (repeated exposure)
Aspiration hazard
Information on the likelyroutes of exposure
:
Not available.
Not available.
Not available.
Eye contactInhalation : No known significant effects or critical hazards.
No known significant effects or critical hazards.:
Page: 8/43Date of issue : 4/25/2016. Internet: lubricants.petro-canada.ca/msdsA Suncor business TM Trademark of Suncor Energy Inc. Used under licence.
PURITY TM FG WO WHITE MINERAL OIL 10Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - Europe
SECTION 11: Toxicological information
Potential chronic health effects
No known significant effects or critical hazards.General :Not listed as carcinogenic by OSHA, NTP or IARC.Carcinogenicity :No known significant effects or critical hazards.Mutagenicity :No known significant effects or critical hazards.Teratogenicity :
Not available.
Conclusion/Summary : Not available.
Developmental effects : No known significant effects or critical hazards.
Fertility effects : No known significant effects or critical hazards.
Symptoms related to the physical, chemical and toxicological characteristics
Skin contact
IngestionInhalation No specific data.
Adverse symptoms may include the following:nausea or vomitingRepeated skin exposure can produce local skin destruction or dermatitis.
::
:Eye contact : No specific data.
Delayed and immediate effects and also chronic effects from short and long term exposureShort term exposure
Long term exposure
Potential immediateeffects
Potential delayed effects :
:
Potential immediateeffects
Potential delayed effects :
:
Other information :
Not available.
Not available.
Not available.
Not available.
Not available.
May be fatal if swallowed and enters airways.:IngestionSkin contact : No known significant effects or critical hazards.
12.3 Bioaccumulative potentialNot available.
12.1 Toxicity
Highly refined base oils NOEC >=100 mg/l Algae 72 hoursNOEC >=100 mg/l Daphnia 48 hoursNOEC >=100 mg/l Fish 96 hours
Product/ingredient name SpeciesResult Exposure
Conclusion/Summary : Not available.
12.2 Persistence and degradabilityConclusion/Summary : Not available.
SECTION 12: Ecological information
12.4 Mobility in soilSoil/water partitioncoefficient (KOC)
Not available.:
Page: 9/43Date of issue : 4/25/2016. Internet: lubricants.petro-canada.ca/msdsA Suncor business TM Trademark of Suncor Energy Inc. Used under licence.
PURITY TM FG WO WHITE MINERAL OIL 10Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - Europe
SECTION 12: Ecological informationMobility Not available.:
12.6 Other adverse effects No known significant effects or critical hazards.
PBT : No.P: Not available. B: Not available. T: No.
vPvB : Not available.vP: Not available. vB: Not available.
12.5 Results of PBT and vPvB assessment
:
The classification of the product may meet the criteria for a hazardous waste.Hazardous waste :
The generation of waste should be avoided or minimised wherever possible.Significant quantities of waste product residues should not be disposed of via thefoul sewer but processed in a suitable effluent treatment plant. Dispose of surplusand non-recyclable products via a licensed waste disposal contractor. Disposal ofthis product, solutions and any by-products should at all times comply with therequirements of environmental protection and waste disposal legislation and anyregional local authority requirements.
:Methods of disposal
SECTION 13: Disposal considerationsThe information in this section contains generic advice and guidance. The list of Identified Uses in Section 1 should beconsulted for any available use-specific information provided in the Exposure Scenario(s).
13.1 Waste treatment methodsProduct
PackagingMethods of disposal :
Special precautions :
The generation of waste should be avoided or minimised wherever possible. Wastepackaging should be recycled. Incineration or landfill should only be consideredwhen recycling is not feasible.This material and its container must be disposed of in a safe way. Care should betaken when handling emptied containers that have not been cleaned or rinsed out.Empty containers or liners may retain some product residues. Avoid dispersal ofspilt material and runoff and contact with soil, waterways, drains and sewers.
-
-
-
-
-
-
-
Not regulated.
--
-
-
Not regulated.
-
Not regulated. Not regulated.
- - - -
SECTION 14: Transport informationADR/RID IMDG IATA
14.1 UN number
14.2 UN propershipping name
14.3 Transporthazard class(es)
14.4 Packinggroup
ADN/ADNR
Additionalinformation
14.5Environmentalhazards
14.6 Specialprecautions foruser
No. No. No. No.
Not available. Not available. Not available. Not available.
Page: 10/43Date of issue : 4/25/2016. Internet: lubricants.petro-canada.ca/msdsA Suncor business TM Trademark of Suncor Energy Inc. Used under licence.
PURITY TM FG WO WHITE MINERAL OIL 10Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - Europe
SECTION 14: Transport information
14.7 Transport in bulkaccording to Annex II ofMARPOL 73/78 and the IBCCode
: Not available.
Other EU regulations
Not applicable.Annex XVII - Restrictionson the manufacture,placing on the market anduse of certain dangeroussubstances, mixtures andarticles
:
SECTION 15: Regulatory information15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
EU Regulation (EC) No. 1907/2006 (REACH)Annex XIV - List of substances subject to authorisation
15.2 Chemical SafetyAssessment
Complete.
Substances of very high concern
:
None of the components are listed.
Canada inventory
:Europe inventory All components are listed or exempted.Australia inventory (AICS): All components are listed or exempted.China inventory (IECSC): All components are listed or exempted.Japan inventory: All components are listed or exempted.Korea inventory: All components are listed or exempted.New Zealand Inventory of Chemicals (NZIoC): All components are listed orexempted.Philippines inventory (PICCS): All components are listed or exempted.
International lists :
United States inventory(TSCA 8b)
All components are listed or exempted.: All components are listed or exempted.
:
Key literature referencesand sources for data
: Available upon request.TM Trademark of Suncor Energy Inc. Used under licence.
Indicates information that has changed from previously issued version.
SECTION 16: Other information
Full text of abbreviated Hstatements
:
Abbreviations andacronyms
: ATE = Acute Toxicity EstimateCLP = Classification, Labelling and Packaging Regulation [Regulation (EC) No.1272/2008]DNEL = Derived No Effect LevelEUH statement = CLP-specific Hazard statementPNEC = Predicted No Effect ConcentrationRRN = REACH Registration Number
Procedure used to derive the classification according to Regulation (EC) No. 1272/2008 [CLP/GHS]
Classification Justification
Asp. Tox. 1, H304 On basis of test data
Full text of classifications[CLP/GHS]
:
H304 May be fatal if swallowed and enters airways.
Asp. Tox. 1, H304 ASPIRATION HAZARD - Category 1
Page: 11/43Date of issue : 4/25/2016. Internet: lubricants.petro-canada.ca/msdsA Suncor business TM Trademark of Suncor Energy Inc. Used under licence.
PURITY TM FG WO WHITE MINERAL OIL 10Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - Europe
SECTION 16: Other information4/25/2016.Date of printing
Date of issue/ Date ofrevision
Version
To the best of our knowledge, the information contained herein is accurate. However, neither the above-namedsupplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of theinformation contained herein.Final determination of suitability of any material is the sole responsibility of the user. All materials may presentunknown hazards and should be used with caution. Although certain hazards are described herein, we cannotguarantee that these are the only hazards that exist.
Notice to reader
Date of previous issue
:
:
:
:
4/25/2016.
No previous validation.1
:Prepared by Product Safety - DSR:For Copy of (M)SDS Internet: lubricants.petro-canada.ca/msds
Lubricants:Western Canada, telephone: (001) 800-661-1199; fax: (001) 800-378-4518Ontario & Central Canada, telephone: (001) 800-268-5850; fax: (001) 800-201-6285Quebec & Eastern Canada, telephone: (001) 800-576-1686; fax: (001) 800-201-6285
For Product Safety Information: (001) 905-804-4752
Page: 12/43Date of issue : 4/25/2016. Internet: lubricants.petro-canada.ca/msdsA Suncor business TM Trademark of Suncor Energy Inc. Used under licence.
Annex to the extended Safety Data Sheet (eSDS)
: ES 9.10.1a - highly refined base oils
Consumer
List of use descriptors : Identified use name: Use in Cleaning Agents - ConsumerSubstance supplied to that use in form of: As suchSector of end use: SU21Subsequent service life relevant for that use: No.Environmental Release Category: ERC08a, ERC08dMarket sector by type of chemical product: PC03, PC04, PC09a, PC24, PC35,PC38Article category related to subsequent service life: Not applicable.
Section 1 - TitleShort title of the exposurescenario
Code : PFWO10Product definition : Mono-constituent substance
Product name : PURITY TM FG WO WHITE MINERAL OIL 10
Identification of the substance or mixture
13/43
Annex to the extended Safety Data Sheet (eSDS)
: ES 9.16.1a - highly refined base oils
Consumer
List of use descriptors : Identified use name: Use in Agrochemicals uses - ConsumerSubstance supplied to that use in form of: As suchSector of end use: SU21Subsequent service life relevant for that use: No.Environmental Release Category: ERC08a, ERC08dMarket sector by type of chemical product: PC12, PC27, PC22 Lawn and GardenPreparations, including fertilizersArticle category related to subsequent service life: Not applicable.
Section 1 - TitleShort title of the exposurescenario
Code : PFWO10Product definition : Mono-constituent substance
Product name : PURITY TM FG WO WHITE MINERAL OIL 10
Identification of the substance or mixture
14/43
Annex to the extended Safety Data Sheet (eSDS)
: ES 9.23.1a - highly refined base oils
Consumer
List of use descriptors : Identified use name: Lubricants (Low release) - ConsumerSubstance supplied to that use in form of: As suchSector of end use: SU21Subsequent service life relevant for that use: No.Environmental Release Category: ERC09a, ERC09bMarket sector by type of chemical product: PC01, PC24, PC31, PC06 AutomotiveCare Products***Article category related to subsequent service life: Not applicable.
Section 1 - TitleShort title of the exposurescenario
Code : PFWO10Product definition : Mono-constituent substance
Product name : PURITY TM FG WO WHITE MINERAL OIL 10
Identification of the substance or mixture
15/43
Annex to the extended Safety Data Sheet (eSDS)
: ES 9.24.4a - highly refined base oils
Consumer
List of use descriptors : Identified use name: Lubricants (high release) - ConsumerSubstance supplied to that use in form of: As suchSector of end use: SU21Subsequent service life relevant for that use: No.Environmental Release Category: ERC08a, ERC08dMarket sector by type of chemical product: PC01, PC24, PC31, PC06 AutomotiveCare Products***Article category related to subsequent service life: Not applicable.
Section 1 - TitleShort title of the exposurescenario
Code : PFWO10Product definition : Mono-constituent substance
Product name : PURITY TM FG WO WHITE MINERAL OIL 10
Identification of the substance or mixture
16/43
Annex to the extended Safety Data Sheet (eSDS)
: ES 9.32.1a - highly refined base oils
Consumer
List of use descriptors : Identified use name: Other Consumer Uses - ConsumerSubstance supplied to that use in form of: As suchSector of end use: SU21Subsequent service life relevant for that use: No.Environmental Release Category: ERC08a, ERC08dMarket sector by type of chemical product: PC28, PC39Article category related to subsequent service life: Not applicable.
Section 1 - TitleShort title of the exposurescenario
Code : PFWO10Product definition : Mono-constituent substance
Product name : PURITY TM FG WO WHITE MINERAL OIL 10
Identification of the substance or mixture
17/43
Annex to the extended Safety Data Sheet (eSDS)
: ES 9.7.1a - Highly Refined Base Oils
Consumer
List of use descriptors : Identified use name: Uses in Coatings - ConsumerSubstance supplied to that use in form of: As suchSector of end use: SU21Subsequent service life relevant for that use: No.Environmental Release Category: ERC08a, ERC08dMarket sector by type of chemical product: PC01, PC02, PC04, PC09a, PC09b,PC09c, PC15, PC18, PC23, PC24, PC31, PC34, PC05 Artists Supply and Hobbypreparations, PC10 Building and construction preparations not covered elsewhere
Section 1 - TitleShort title of the exposurescenario
Code : PFWO10Product definition : Mono-constituent substance
Product name : PURITY TM FG WO WHITE MINERAL OIL 10
Identification of the substance or mixture
18/43
Annex to the extended Safety Data Sheet (eSDS)
: ES 9.1.1a - highly refined base oils
Industrial
List of use descriptors : Identified use name: Manufacture of substance - IndustrialProcess Category: PROC01, PROC02, PROC03, PROC04, PROC08a, PROC08b,PROC15Substance supplied to that use in form of: As suchSector of end use: SU03, SU08, SU09Subsequent service life relevant for that use: No.Environmental Release Category: ERC01, ERC04Market sector by type of chemical product: Not applicable.Article category related to subsequent service life: Not applicable.
Section 1 - TitleShort title of the exposurescenario
Code : PFWO10Product definition : Mono-constituent substance
Product name : PURITY TM FG WO WHITE MINERAL OIL 10
Identification of the substance or mixture
19/43
Annex to the extended Safety Data Sheet (eSDS)
: ES 9.11.1a - highly refined base oils
Industrial
List of use descriptors : Identified use name: Metal working fluids/rolling oils - IndustrialProcess Category: PROC01, PROC02, PROC03, PROC04, PROC05, PROC07,PROC08a, PROC08b, PROC09, PROC10, PROC13, PROC17Substance supplied to that use in form of: As suchSector of end use: SU03Subsequent service life relevant for that use: No.Environmental Release Category: ERC04Market sector by type of chemical product: Not applicable.Article category related to subsequent service life: Not applicable.
Section 1 - TitleShort title of the exposurescenario
Code : PFWO10Product definition : Mono-constituent substance
Product name : PURITY TM FG WO WHITE MINERAL OIL 10
Identification of the substance or mixture
20/43
Annex to the extended Safety Data Sheet (eSDS)
: ES 9.12.1a - highly refined base oils
Professional
List of use descriptors : Identified use name: Metal working fluids/rolling oils - ProfessionalProcess Category: PROC01, PROC02, PROC03, PROC05, PROC08a, PROC08b,PROC09, PROC10, PROC11, PROC13, PROC17Substance supplied to that use in form of: As suchSector of end use: SU22Subsequent service life relevant for that use: No.Environmental Release Category: ERC08a, ERC08dMarket sector by type of chemical product: Not applicable.Article category related to subsequent service life: Not applicable.
Section 1 - TitleShort title of the exposurescenario
Code : PFWO10Product definition : Mono-constituent substance
Product name : PURITY TM FG WO WHITE MINERAL OIL 10
Identification of the substance or mixture
21/43
Annex to the extended Safety Data Sheet (eSDS)
: ES 9.13.1a - highly refined base oils
Industrial
List of use descriptors : Identified use name: Use as binders and release agents - IndustrialProcess Category: PROC01, PROC02, PROC03, PROC04, PROC06, PROC07,PROC08b, PROC10, PROC13, PROC14Substance supplied to that use in form of: As suchSector of end use: SU03Subsequent service life relevant for that use: No.Environmental Release Category: ERC04Market sector by type of chemical product: Not applicable.Article category related to subsequent service life: Not applicable.
Section 1 - TitleShort title of the exposurescenario
Code : PFWO10Product definition : Mono-constituent substance
Product name : PURITY TM FG WO WHITE MINERAL OIL 10
Identification of the substance or mixture
22/43
Annex to the extended Safety Data Sheet (eSDS)
: ES 9.14.1a - highly refined base oils
Professional
List of use descriptors : Identified use name: Use as binders and release agents - ProfessionalProcess Category: PROC01, PROC02, PROC03, PROC04, PROC06, PROC08a,PROC08b, PROC10, PROC11, PROC14Substance supplied to that use in form of: As suchSector of end use: SU22Subsequent service life relevant for that use: No.Environmental Release Category: ERC08a, ERC08dMarket sector by type of chemical product: Not applicable.Article category related to subsequent service life: Not applicable.
Section 1 - TitleShort title of the exposurescenario
Code : PFWO10Product definition : Mono-constituent substance
Product name : PURITY TM FG WO WHITE MINERAL OIL 10
Identification of the substance or mixture
23/43
Annex to the extended Safety Data Sheet (eSDS)
: ES 9.15.1a - highly refined base oils
Professional
List of use descriptors : Identified use name: Use in Agrochemicals uses - ProfessionalProcess Category: PROC01, PROC02, PROC04, PROC08a, PROC08b, PROC11,PROC13Substance supplied to that use in form of: As suchSector of end use: SU22Subsequent service life relevant for that use: No.Environmental Release Category: ERC08a, ERC08dMarket sector by type of chemical product: Not applicable.Article category related to subsequent service life: Not applicable.
Section 1 - TitleShort title of the exposurescenario
Code : PFWO10Product definition : Mono-constituent substance
Product name : PURITY TM FG WO WHITE MINERAL OIL 10
Identification of the substance or mixture
24/43
Annex to the extended Safety Data Sheet (eSDS)
: ES 9.17.1a - highly refined base oils
Industrial
List of use descriptors : Identified use name: Rubber production and processing - IndustrialProcess Category: PROC01, PROC02, PROC03, PROC04, PROC05, PROC06,PROC07, PROC08a, PROC08b, PROC09, PROC13, PROC14, PROC15, PROC21Substance supplied to that use in form of: As suchSector of end use: SU03, SU10, SU11Subsequent service life relevant for that use: No.Environmental Release Category: ERC01, ERC04, ERC06dMarket sector by type of chemical product: Not applicable.Article category related to subsequent service life: Not applicable.
Section 1 - TitleShort title of the exposurescenario
Code : PFWO10Product definition : Mono-constituent substance
Product name : PURITY TM FG WO WHITE MINERAL OIL 10
Identification of the substance or mixture
25/43
Annex to the extended Safety Data Sheet (eSDS)
: ES 9.18.1a - highly refined base oils
Industrial
List of use descriptors : Identified use name: Polymer processing - IndustrialProcess Category: PROC01, PROC02, PROC03, PROC04, PROC05, PROC06,PROC08a, PROC08b, PROC09, PROC13, PROC14, PROC21Substance supplied to that use in form of: As suchSector of end use: SU10Subsequent service life relevant for that use: No.Environmental Release Category: ERC04Market sector by type of chemical product: Not applicable.Article category related to subsequent service life: Not applicable.
Section 1 - TitleShort title of the exposurescenario
Code : PFWO10Product definition : Mono-constituent substance
Product name : PURITY TM FG WO WHITE MINERAL OIL 10
Identification of the substance or mixture
26/43
Annex to the extended Safety Data Sheet (eSDS)
: ES 9.2.1a - highly refined base oils
Industrial
List of use descriptors : Identified use name: Use as an intermediate - IndustrialProcess Category: PROC01, PROC02, PROC03, PROC04, PROC08a, PROC08b,PROC15Substance supplied to that use in form of: As suchSector of end use: SU03, SU08, SU10Subsequent service life relevant for that use: No.Environmental Release Category: ERC06aMarket sector by type of chemical product: Not applicable.Article category related to subsequent service life: Not applicable.
Section 1 - TitleShort title of the exposurescenario
Code : PFWO10Product definition : Mono-constituent substance
Product name : PURITY TM FG WO WHITE MINERAL OIL 10
Identification of the substance or mixture
27/43
Annex to the extended Safety Data Sheet (eSDS)
: ES 9.20.1a - highly refined base oils
Industrial
List of use descriptors : Identified use name: Lubricants - IndustrialProcess Category: PROC01, PROC02, PROC03, PROC04, PROC07, PROC08a,PROC08b, PROC09, PROC10, PROC13, PROC17, PROC18Substance supplied to that use in form of: As suchSector of end use: SU03Subsequent service life relevant for that use: No.Environmental Release Category: ERC04, ERC07Market sector by type of chemical product: Not applicable.Article category related to subsequent service life: Not applicable.
Section 1 - TitleShort title of the exposurescenario
Code : PFWO10Product definition : Mono-constituent substance
Product name : PURITY TM FG WO WHITE MINERAL OIL 10
Identification of the substance or mixture
28/43
Annex to the extended Safety Data Sheet (eSDS)
: ES 9.21.1a - highly refined base oils
Professional
List of use descriptors : Identified use name: Lubricants (Low release) - ProfessionalProcess Category: PROC01, PROC02, PROC03, PROC04, PROC08a, PROC08b,PROC09, PROC10, PROC11, PROC13, PROC17, PROC18, PROC20Substance supplied to that use in form of: As suchSector of end use: SU22Subsequent service life relevant for that use: No.Environmental Release Category: ERC09a, ERC09bMarket sector by type of chemical product: Not applicable.Article category related to subsequent service life: Not applicable.
Section 1 - TitleShort title of the exposurescenario
Code : PFWO10Product definition : Mono-constituent substance
Product name : PURITY TM FG WO WHITE MINERAL OIL 10
Identification of the substance or mixture
29/43
Annex to the extended Safety Data Sheet (eSDS)
: ES 9.22.1a - highly refined base oils
Professional
List of use descriptors : Identified use name: Lubricants (high release) - ProfessionalProcess Category: PROC01, PROC02, PROC03, PROC04, PROC08a, PROC08b,PROC09, PROC10, PROC11, PROC13, PROC17, PROC18, PROC20Substance supplied to that use in form of: As suchSector of end use: SU22Subsequent service life relevant for that use: No.Environmental Release Category: ERC08a, ERC08dMarket sector by type of chemical product: Not applicable.Article category related to subsequent service life: Not applicable.
Section 1 - TitleShort title of the exposurescenario
Code : PFWO10Product definition : Mono-constituent substance
Product name : PURITY TM FG WO WHITE MINERAL OIL 10
Identification of the substance or mixture
30/43
Annex to the extended Safety Data Sheet (eSDS)
: ES 9.25.1a - highly refined base oils
Industrial
List of use descriptors : Identified use name: Use in laboratories - IndustrialProcess Category: PROC10, PROC15Substance supplied to that use in form of: As suchSector of end use: SU03Subsequent service life relevant for that use: No.Environmental Release Category: ERC02, ERC04Market sector by type of chemical product: Not applicable.Article category related to subsequent service life: Not applicable.
Section 1 - TitleShort title of the exposurescenario
Code : PFWO10Product definition : Mono-constituent substance
Product name : PURITY TM FG WO WHITE MINERAL OIL 10
Identification of the substance or mixture
31/43
Annex to the extended Safety Data Sheet (eSDS)
: ES 9.26.1a - highly refined base oils
Professional
List of use descriptors : Identified use name: Use in laboratories - ProfessionalProcess Category: PROC10, PROC15Substance supplied to that use in form of: As suchSector of end use: SU22Subsequent service life relevant for that use: No.Environmental Release Category: ERC08aMarket sector by type of chemical product: Not applicable.Article category related to subsequent service life: Not applicable.
Section 1 - TitleShort title of the exposurescenario
Code : PFWO10Product definition : Mono-constituent substance
Product name : PURITY TM FG WO WHITE MINERAL OIL 10
Identification of the substance or mixture
32/43
Annex to the extended Safety Data Sheet (eSDS)
: ES 9.27.1a - highly refined base oils
Industrial
List of use descriptors : Identified use name: Water treatment chemicals - IndustrialProcess Category: PROC01, PROC02, PROC03, PROC04, PROC08a, PROC08b,PROC13Substance supplied to that use in form of: As suchSector of end use: SU10Subsequent service life relevant for that use: No.Environmental Release Category: ERC03, ERC04Market sector by type of chemical product: Not applicable.Article category related to subsequent service life: Not applicable.
Section 1 - TitleShort title of the exposurescenario
Code : PFWO10Product definition : Mono-constituent substance
Product name : PURITY TM FG WO WHITE MINERAL OIL 10
Identification of the substance or mixture
33/43
Annex to the extended Safety Data Sheet (eSDS)
: ES 9.28.1a - highly refined base oils
Professional
List of use descriptors : Identified use name: Water treatment chemicals - ProfessionalProcess Category: PROC01, PROC02, PROC03, PROC04, PROC08a, PROC08b,PROC13Substance supplied to that use in form of: As suchSector of end use: SU22Subsequent service life relevant for that use: No.Environmental Release Category: ERC08fMarket sector by type of chemical product: Not applicable.Article category related to subsequent service life: Not applicable.
Section 1 - TitleShort title of the exposurescenario
Code : PFWO10Product definition : Mono-constituent substance
Product name : PURITY TM FG WO WHITE MINERAL OIL 10
Identification of the substance or mixture
34/43
Annex to the extended Safety Data Sheet (eSDS)
: ES 9.29.1a - highly refined base oils
Professional
List of use descriptors : Identified use name: Explosives manufacture and use - ProfessionalProcess Category: PROC01, PROC03, PROC05, PROC08a, PROC08bSubstance supplied to that use in form of: As suchSector of end use: SU22Subsequent service life relevant for that use: No.Environmental Release Category: ERC08eMarket sector by type of chemical product: Not applicable.Article category related to subsequent service life: Not applicable.
Section 1 - TitleShort title of the exposurescenario
Code : PFWO10Product definition : Mono-constituent substance
Product name : PURITY TM FG WO WHITE MINERAL OIL 10
Identification of the substance or mixture
35/43
Annex to the extended Safety Data Sheet (eSDS)
: ES 9.3.1a - highly refined base oils
Industrial
List of use descriptors : Identified use name: Distribution of substance - IndustrialProcess Category: PROC01, PROC02, PROC03, PROC04, PROC08a, PROC08b,PROC09, PROC15Substance supplied to that use in form of: As suchSector of end use: SU03Subsequent service life relevant for that use: No.Environmental Release Category: ERC01, ERC02, ERC03, ERC04, ERC05,ERC06a, ERC06b, ERC06c, ERC06d, ERC07Market sector by type of chemical product: Not applicable.Article category related to subsequent service life: Not applicable.
Section 1 - TitleShort title of the exposurescenario
Code : PFWO10Product definition : Mono-constituent substance
Product name : PURITY TM FG WO WHITE MINERAL OIL 10
Identification of the substance or mixture
36/43
Annex to the extended Safety Data Sheet (eSDS)
: ES 9.30.1a - highly refined base oils
Industrial
List of use descriptors : Identified use name: Functional Fluids - IndustrialProcess Category: PROC01, PROC02, PROC03, PROC08a, PROC08b, PROC09Substance supplied to that use in form of: As suchSector of end use: SU03Subsequent service life relevant for that use: No.Environmental Release Category: ERC07Market sector by type of chemical product: Not applicable.Article category related to subsequent service life: Not applicable.
Section 1 - TitleShort title of the exposurescenario
Code : PFWO10Product definition : Mono-constituent substance
Product name : PURITY TM FG WO WHITE MINERAL OIL 10
Identification of the substance or mixture
37/43
Annex to the extended Safety Data Sheet (eSDS)
: ES 9.31.1a - highly refined base oils
Professional
List of use descriptors : Identified use name: Functional Fluids - ProfessionalProcess Category: PROC01, PROC02, PROC03, PROC08a, PROC09, PROC20Substance supplied to that use in form of: As suchSector of end use: SU22Subsequent service life relevant for that use: No.Environmental Release Category: ERC09a, ERC09bMarket sector by type of chemical product: Not applicable.Article category related to subsequent service life: Not applicable.
Section 1 - TitleShort title of the exposurescenario
Code : PFWO10Product definition : Mono-constituent substance
Product name : PURITY TM FG WO WHITE MINERAL OIL 10
Identification of the substance or mixture
38/43
Annex to the extended Safety Data Sheet (eSDS)
: ES 9.4.1a - highly refined base oils
Industrial
List of use descriptors : Identified use name: Formulation and (re)packing of substances and mixtures -IndustrialProcess Category: PROC01, PROC02, PROC03, PROC04, PROC05, PROC08a,PROC08b, PROC09, PROC14, PROC15Substance supplied to that use in form of: As suchSector of end use: SU03, SU10Subsequent service life relevant for that use: No.Environmental Release Category: ERC02Market sector by type of chemical product: Not applicable.Article category related to subsequent service life: Not applicable.
Section 1 - TitleShort title of the exposurescenario
Code : PFWO10Product definition : Mono-constituent substance
Product name : PURITY TM FG WO WHITE MINERAL OIL 10
Identification of the substance or mixture
39/43
Annex to the extended Safety Data Sheet (eSDS)
: ES 9.5.1a - highly refined base oils
Industrial
List of use descriptors : Identified use name: Uses in Coatings - IndustrialProcess Category: PROC01, PROC02, PROC03, PROC04, PROC05, PROC07,PROC08a, PROC08b, PROC10, PROC13, PROC15Substance supplied to that use in form of: As suchSector of end use: SU03Subsequent service life relevant for that use: No.Environmental Release Category: ERC04Market sector by type of chemical product: Not applicable.Article category related to subsequent service life: Not applicable.
Section 1 - TitleShort title of the exposurescenario
Code : PFWO10Product definition : Mono-constituent substance
Product name : PURITY TM FG WO WHITE MINERAL OIL 10
Identification of the substance or mixture
40/43
Annex to the extended Safety Data Sheet (eSDS)
: ES 9.6.1a - highly refined base oils
Professional
List of use descriptors : Identified use name: Uses in Coatings - ProfessionalProcess Category: PROC01, PROC02, PROC03, PROC04, PROC05, PROC08a,PROC08b, PROC10, PROC11, PROC13, PROC15, PROC19Substance supplied to that use in form of: As suchSector of end use: SU22Subsequent service life relevant for that use: No.Environmental Release Category: ERC08a, ERC08dMarket sector by type of chemical product: Not applicable.Article category related to subsequent service life: Not applicable.
Section 1 - TitleShort title of the exposurescenario
Code : PFWO10Product definition : Mono-constituent substance
Product name : PURITY TM FG WO WHITE MINERAL OIL 10
Identification of the substance or mixture
41/43
Annex to the extended Safety Data Sheet (eSDS)
: ES 9.8.1a - Highly Refined Base Oils
Industrial
List of use descriptors : Identified use name: Use in Cleaning Agents - IndustrialProcess Category: PROC01, PROC02, PROC03, PROC04, PROC07, PROC08a,PROC08b, PROC10, PROC13Substance supplied to that use in form of: As suchSector of end use: SU03Subsequent service life relevant for that use: No.Environmental Release Category: ERC04Market sector by type of chemical product: Not applicable.Article category related to subsequent service life: Not applicable.
Section 1 - TitleShort title of the exposurescenario
Code : PFWO10Product definition : Mono-constituent substance
Product name : PURITY TM FG WO WHITE MINERAL OIL 10
Identification of the substance or mixture
42/43
Annex to the extended Safety Data Sheet (eSDS)
: ES 9.9.1a - Highly Refined Base Oils
Professional
List of use descriptors : Identified use name: Use in Cleaning Agents - ProfessionalProcess Category: PROC01, PROC02, PROC03, PROC04, PROC08a, PROC08b,PROC10, PROC11, PROC13Substance supplied to that use in form of: As suchSector of end use: SU22Subsequent service life relevant for that use: No.Environmental Release Category: ERC08a, ERC08dMarket sector by type of chemical product: Not applicable.Article category related to subsequent service life: Not applicable.
Section 1 - TitleShort title of the exposurescenario
Code : PFWO10Product definition : Mono-constituent substance
Product name : PURITY TM FG WO WHITE MINERAL OIL 10
Identification of the substance or mixture
43/43
top related