composite decking fixings 3 - adermalocatelli · pdf file49 type aw composite decking fixings...
Post on 16-Mar-2018
216 Views
Preview:
TRANSCRIPT
48
Composite Decking Fixings 3
Composite Decking Fixings
A range of high quality, cost effective building services connections
CMF®, Tata Steel®, Kingspan®, SMD® and Richard Lees®
To apply the published static loads, it is important that all the
Lindapter Composite Decking Fixings are installed only when the
Advantages include:
Tel: +39 02 968 2161 | gl@gllocatelli.it | www.gllocatelli.it
49
Composite Decking FixingsType AW 3
Locking Plate
Installation
3.
4.
3. 4.
The Alphawedge is designed for Ribdeck®
manufactured by Richard Lees®
kN Nm
Type AW - AlphawedgeLocking Plate: Pre-galvanised strip
Tel: +39 02 968 2161 | gl@gllocatelli.it | www.gllocatelli.it
50
Composite Decking FixingsType MF 3
Bracket
Met-Nut
Installation
3.
4.
3. 4.
The Type MF is designed for MetFloor®
®
manufactured by Kingspan®
Type MF
Met-Nut: Malleable iron, bright zinc plated
kN Nm
Tel: +39 02 968 2161 | gl@gllocatelli.it | www.gllocatelli.it
51
Composite Decking FixingsType MW2 3
Type MW2 - Multiwedge 2Bracket: Pre-galvanised strip Multinut: Malleable iron, bright zinc plated
Bracket
Multinut
The Multiwedge 2 is designed for Multideck®
®
kN Nm
Installation
3.
4.
3. 4.
Tel: +39 02 968 2161 | gl@gllocatelli.it | www.gllocatelli.it
52
Composite Decking FixingsType SD2 3
Type SD2 - Slimdek® 2
Pre-galvanised strip
Main Body
Inner Body
The Slimdek® 2 is designed for the ComFlor®
by Tata Steel®
kN Nm
Installation
3.
4. 5. 6.
®
Hold Slimdek®
3.
4.
5. Rotate V-Nut through 90° to allow it to sit at the bottom of the Slimdek®
6.
Cam
V-Nut
Tel: +39 02 968 2161 | gl@gllocatelli.it | www.gllocatelli.it
53
Composite Decking FixingsType TR60 3
Type TR60Locking Plate: Pre-galvanised strip
®
Order example:
kN Nm
Locking Plate
Installation
3. 4.
3.
4.
Tel: +39 02 968 2161 | gl@gllocatelli.it | www.gllocatelli.it
54
Composite Decking FixingsType VN 3
Type VN - V-NutMalleable iron, mild steel, bright zinc plated
Order example: VN
kN Nm
13mm
25mm
Installation
3.
3.
Tel: +39 02 968 2161 | gl@gllocatelli.it | www.gllocatelli.it
55
Composite Decking FixingsType TC 3
Type TC - Toggle ClampSteel Strip, bright zinc plated
The Toggle Clamp is designed for service suspension from pre-cast
mm kN Nm mm mm mm
1) Subject to the strength of the concrete section.
Order example: TC08
V
T
Nut
Toggle
LINDAPTER
LINDAPTER
LINDAPTER
LINDAPTERLINDAPTER
LINDAPTER
3. 4. 5. 6.
Installation
3.
4.
5.
6.
Tel: +39 02 968 2161 | gl@gllocatelli.it | www.gllocatelli.it
Composite Decking FixingsDecking Fixings Guide 3
Deckings Lindapter Decking Fixings
Richard Lees® Steel Decking
Structural Metal Decks (SMD®)
Type AW
Type TR60
Type VN
® AL®
® 80
® 51
® 51
® and Superib®
® 50
Structural Metal Decks (SMD®)
Tata Steel®
Richard Lees® Steel Decking
Kingspan® Structural Products
Composite Metal Flooring (CMF®) Type MF
®
® 80
Kingspan® Structural Products Type MW2
®
® 80
Tata Steel® Type SD2
® 225
Tel: +39 02 968 2161 | gl@gllocatelli.it | www.gllocatelli.it
57
Composite Decking FixingsInstallation 3
Installation
Type AW - Alphawedge
3. Slide plate up the threaded rod, over the wedge, to lock it in position into the
4.
3. 4.
Type TR60
Insert wedge into the re-entrant channel of the decking and rotate until the
3. Slide the plate up the threaded rod and over the wedge to lock it into position in
4.
3. 4.
Type VN - V-Nut
3. Rotate both rod and VN through 90° so that tapered sides engage
3.
4.
Type MF
3.
4.
3.
Type MW2 - Multiwedge 2
Snap the other leg of bracket into position inside the decking and slide the
3.
4.
3. 4.
3.
4. 5. 6.
Type SD2 - Slimdek 2
®
Hold Slimdek® 2 in position with one hand, then rotate cam in the direction
3.
4.
5. Rotate V-Nut through 90° to allow it to sit at the bottom of the Slimdek®
6.
Tel: +39 02 968 2161 | gl@gllocatelli.it | www.gllocatelli.it
top related