components of the h ydronic of the heating/cooling system
Post on 23-Feb-2016
80 Views
Preview:
DESCRIPTION
TRANSCRIPT
Hydronic Heating/Cooling System of Intelligent Workplace at Carnegie Mellon University, Pittsburgh
Hydronic Heating/Cooling System of Intelligent Workplace at Carnegie Mellon University, Pittsburgh1Components of the Hydronic of the heating/cooling systemWater Mullions SystemRadiant PanelsCool Waves2IW Overall HVAC System
View of the basement heat exchangerView of the supply/return pipes3
IW Schematic Hot Water System
Heat exchangerHot water pump to the fourth floor* Only one pump is functional at any given time
Water flow rate sensorHot water supply/return temperature sensor4
IW Schematic Chilled Water System
Chilled water system flow rate valveChilled water system temperature sensor5Secondary Water Loop in the 4th floor Mechanical room
Water mullion mixing valveWater Mullion flow rate valveWater mullion flow rate sensor6HVAC Control SystemTemperature of the hot water in the basement 180 FTemperature of the chilled water in the basement 40-42 FTemperature of the hot water on the 4th floor 120 FMullion Surface Temperature 80-90 F
Siemens control panel in the basement
7
HVAC Control SystemJohnson Controls Metasys server (former)Siemens Controls Apogee server (March/April 2011)The control system turns on the basement pump if the average south and north zone indoor temperature is below pump set-point (60 F) or if the schedule call for it which also turns on the fourth floor mullion water pump
8HVAC Control SystemSiemens Apogee ServerFlow rate controlTemperature controlActuator controlFlow rate controlTemperature controlActuator control9Mathematical model for the control systemHot water set point equation: Thws = (38-To)*foA + (72 (Tsouth + Tnorth)/2) * fIA +120Thws - Hot water supply temperature set point Tnorth & south indoor temperature of south/north zonesfoA & fIA outside/inside air temperature weighing factors (1)
Mullion surface temperature set point: T mullion-s =((Tsouth +Tnorth)/2 + Thws)/2T mullion-s- Mullion Surface temperature set-point
10Mullions - Heating/Cooling
11
Mullions - Heating/Cooling
Supply water temperature sensorReturn water temperature sensor12Mullions Heating/Cooling26 groups of mullions in the IWEach group has four mullions controlled by one control valve/ flow rate meter The mullion pump runs at 24 gpm during daytime schedule13Performance Analysis of South Mullions for two days14Radiant Panels
Sentra Flow rate valveRadiant panel temperature sensor15Radiant Panels
Water Supply to the radiant panelsRadiant Panels
Water Supply to the radiant panels16Performance AnalysisTemperatures in the basement, IW mechanical room, mullion surface, radiant panel, cool waveFlow rates at the basement, IW mechanical room, before/after supply/returnTemperature, humidity, CO2 measuresEntire system on/off controlsNight set back temperaturesOutdoor air temperature every 10 minsPerformance Analysis of Radiant Panel 1 on two days18Cool Waves Cooling System
19Cool Waves Cooling System
View of the LTG Cool WaveOscillating fans for air circulationAir circulation by convection20Implementation of web-based database
Import data from Csv file
Create the table of the database
Creating online database21Implementation of web-based databaseonline database
PHPMullionID1204:00~05:00data1data205:00~06:00data3data412:00~13:00data NData N+1Web BrowserJavaScript CSS
Web browser with GUI and analytic algorithm22Mockup website
23
top related