component forming dies - gpd global...cf-9 component forming dies are precisely manufactured and are...

CF-9 Component Forming Dies are precisely manufactured and are available to form Two-Leaded Components with center-to-center dimensions of up to .400” , as well as TO-92 Transistors.

CF-9 Component Forming Dies can be ordered to form a wide variety of component shapes. Both common and special configurations can be produced by using CF-9 Component Forming Dies.

Component Forming

Dies

CF-9

611 Hollingsworth

Street

Grand Junctio

n, CO 81505

Tel: (970) 2

45-0408 Fax: (9

70) 245-9674

Web: www.gpd-global.com

GPD Part No. 905-00

CF-9Component Forming

Die CatalogJune 12, 2007

How to Use this Catalog:NEW USERS

Decide which die(s)/knife you need by using the DieSelection Guide starting on page Guide-1.

EXPERIENCED USERSUse the numeric listing of dies and the brief description ofeach die in the Index starting on page 1.

See die functions and capabilities listed and illustrated inthe main body of the catalog.

Special Dies*When ordering special dies or a configuration not shown inthe catalog, additional information is required:• component samples,• pc board samples, and• desired lead form configuration (print, sketch, or sample).

* Special dies may be subject to a pre-determinedengineering charge. In some cases, we may not be able toaccomplish the requested form due to machine and dielimitations.

Standard Delivery Times: • Standard dies: Stock to 4 weeks • Modifications or special dies: 6 to 8 weeks

CF-9 Die CatalogPart No. 905-00Prepared by GPD Documentation Dept. 611 Hollingsworth Street©1997, 2006 GPD Global® Grand Junction, CO 81505All Rights Reserved (970) 245-0408 FAX (970) 245-9674