complex cnc machining grinding & coatings · 2019-10-24 · page 1 of 1. this is to certify...
Post on 22-Jun-2020
0 Views
Preview:
TRANSCRIPT
ENG I N E E R I NG LTD
CNC Division
Complex CNC MachiningGrinding & Coatings
Altec Engineering LimitedCNC Precision Machining Capability
• Medium to High Complexity Machining• Low, Medium and High Volume Capability• Full Contract Supply, Inclusive Of Special
Processes• New Product Introduction• Exotic Materials• CustomerSpecificDocumentationPacks• Supply Chain Management
Services
03
• 5 Axis CNC Machining• 3 & 4 Axis CNC Machining• 3 Axis Turning• 7 Axis Sliding Head• Universal Grinding• Wire Erosion• Electro Discharge Machining• 3D Printing• Coatings
In-house Capabilities
Aerospace Approvals
Nuclear Approvals
Certificate of Approval
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 1 of 1
This is to certify that the Management System of:
Altec Engineering Limited
Bowburn, Unit 1, Bowburn North Industrial Estate, Durham, DH6 5PF, United Kingdom
has been approved by LRQA to the following standards:
ISO 9001:2015
David Derrick - Area Operations Manager UK & Ireland
Issued by: Lloyd's Register Quality Assurance Limited
Current issue date: 2 July 2018 Original approval(s):
Expiry date: 1 July 2021 ISO 9001 – 5 February 2007
Certificate identity number: 10100285
Approval number(s): ISO 9001 – 0006035
The scope of this approval is applicable to:
Mechanical, Electrical and PLC Program Design of special purpose equipment incorporating pneumatic, automated fluid dispensing, electrical control and safety control systems, touch screen operator panels, data
capture handling, robotic assembly, robotic welding cells and jigs, conveyor handling systems, press systems, screw driving systems, ammunition handling equipment and final functional testing systems. Design,
manufacture and repair of fabrications, press tools, production assembly and inspection jigs and fixtures. Precision manufacturing including tool making, CNC precision machining of standard, exotic and hard materials and armour, spark and wire eroding, surface and cylindrical grinding, welding and rapid prototyping. Defence
through life support manufacturing.
Certificate of Approval
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 1 of 1
This is to certify that the Management System of:
Altec Engineering Limited
Bowburn, Unit 1, Bowburn North Industrial Estate, Durham, DH6 5PF, United Kingdom
has been approved by LRQA to the following standards:
AS 9100D (technically equivalent to prEN 9100:2016 and JISQ 9100 – 2016)
This certification has been performed in accordance with the requirements of EN 9104-001:2013
Lloyd's Register Quality Assurance is accredited under the IAQG ICOP scheme
Certification Structure – Single Site
David Derrick - Area Operations Manager UK & Ireland
Issued by: Lloyd's Register Quality Assurance Limited
Issue date: 2 July 2018
Expiry date: 1 July 2021
Certificate identity number: 10100284
Original approval(s):
AS 9100 5 February 2007
Approval number(s): AS 9100 - 0006036
The scope of this approval is applicable to:
Manufacture of precision components for aerospace, defence, oil, gas and nuclear industries. The pre-treatment and surface coating of ferrous and non-ferrous metals to customer requirements.
5 Axis Milling Up To 3M & Twin Pallet Machines
3 & 4 Axis Milling
3 Axis Turning & 7 Axis Sliding Head
Special Processes: Universal Grinding - Wire Erosion - EDM
3D Printing Coatings
CNC
CATIA V5 HyperMill
CAD / CAM & 3D Printing
www.alteceng.co.uk
CAD Sesign to3D Printed
Sample
3D PrintedSample to
Part Machining
MachinedPart To
Finished Product
CNC
www.alteceng.co.uk
5 Axis Milling - Vertical Travelling Column
5 Axis Milling - Variaxis Trunion Twin Pallet
• Multi-Axis Capability To 3M Long• High Accuracy Machines• Full Connectivity To Our Production
Engineering Department• Proven Capability
CustomerBenefits• High Pressure Coolant• Ability To Perform Gun Drilling Operations• RMP60 In Process Measuring• Extended Tool Magazines For Long
Running Or Multiple Setups
Special Features
3 & 4 Axis Milling
CNC
www.alteceng.co.uk
3 Axis CNC Turning
3 Axis CNC Turning With Indexing Chucks
7 Axis Sliding Head
• Small To High Volume Manufacturing• 3 Axis Capacity Up To 580 Diameter x 2.2M long• Robot Gantry Fed Lathe Systems• 7 Axis Capacity Up To 35mm Diameter
CustomerBenefits• Pallet & Gantry Robot Systems• Collet Chuck Systems• Indexing Chuck Systems
Special Features
CNC
External Wheel No. 2
Internal
External Wheel No. 1
www.alteceng.co.uk
SPECIAL PROCESSES: CNC Universal Grinding
• Internal & External Grinding• ProfileGrinding• Diameters Up To 350mm x 1M Long• CAM, Punch & Eccentric Diameters• High Pressure Centrifuge Swarf System• Range Of Work Holding Exacting Tolerance Capability• Internal - External Spherical Forms• CAD / CAM• +/-0.002
CustomerBenefits• Thread Grinding
Special Features
CNC
SPECIAL PROCESSES: Wire Erosion
www.alteceng.co.uk
• Complex Geometries• 0.005mm Accuracy• Capability Up To 400mm x 300mm x 250mm
CustomerBenefits
SPECIAL PROCESSES: Wire Erosion
SPECIAL PROCESSES: Electro Discharge Machining
CNC
• Temperature & Humidity Controlled Inspection Facility• Extensive Suite Of Calibrated Measuring Equipment
CustomerBenefits
Qty Age Description Accuracy Capacity1 2005 QTC Quantum 0.005 100 x 600 x 350
1 2014 Aberlink A100M CNC CMM 0.005 1500 x 640 x 500
1 1994 DEA Swift Manual CMM 0.005 350 x 150 x 200
1 2011 Trimos V3 0.001 300
1 2014 Trimos V5 (extended probe option) 0.001 700
1 2014 Baty Digital Shadow Graph 0.002 Diameter 700
1 1999 Talyrond 100 Roundness Tester X 5000 Mag Diameter 190
1 2014 GageMaker Mic Trac 0.002 0-900 (36”)
www.alteceng.co.uk
Inspection & Quality Assurance
CNC
• Vibratory Trough De-Burring• Bead Blasting
In-House ServicesSurface Preparation
• Alocrom 1200 - DEF STAN 03-18• SurTec 650 - MIL-DTL-81706 - MIL-DTL-5541 - Type II Class 3
Dip Tank Technology
We work with a large number of customerspecificNADCAPapproved:
• Painters• Plasma & HVOF Coaters• Electro Plating• Gun Drillers• Honers• Heat Treatment• Non Destructive Testing (NDT)
Supply Chain Management
www.alteceng.co.uk
Surface Preparation & Specilist Coatings
CNC
Meet The Sales Team
Contact UsAltec Engineering LimitedUnit 1Bowburn North Industrial EstateBowburnDurhamDH6 5PF
Tel: +44(0)191 377 0555Fax: +44(0)191 377 3013
Email: altec@alteceng.co.ukWebsite: www.alteceng.co.uk
Altec CNC is a trading division of Altec Engineering Limited
Registered Address (As Above)
Registered in England & Wales with Registration Number 07480789
Paul LackenbyManaging DirectorContact:Mobile: 07984 608 016Email: Paul.Lackenby@alteceng.co.uk
Paul MoodyBusiness Development ManagerContact:Mobile: 07720 088 332Email: Paul.Moody@alteceng.co.uk
Chris BellTechnical Sales ManagerContact:Mobile: 07801 580 621Email: Chris.Bell@alteceng.co.uk
Mark BruceGrinding SpecialistContact:Mobile: 07947 353 518Email: Mark.Bruce@alteceng.co.uk
Phil RobsonOperations ManagerContact:Mobile: 07834 653 671Email: Phil.Robson@alteceng.co.uk
www.alteceng.co.uk
Sarah Lackenby - Mechanical Engineer Graduate ProgrammeContact:Mobile: 07717 875 975Email: Sarah.Lackanby@alteceng.co.uk
top related