company presentation atlatos timing belts

Company Presentation Bode Belting GmbH

www.bodebelting.de

Your partner for conveyor and timing belts applications

Competent contact persons for customer specific solutions with over 40 years of industry knowledge.

Founded: 1969Location: Lauenburg/ Elbe (40km from Hamburg)Employees: 40Products: Timing belts and Conveyor beltsCustomers: Dealers and OEMMarkets served: Worldwide

Keywords with background

All products and services of Bode Belting GmbH are aimed at the following keywords:

Cost efficientSmart processes from order to delivery lead not only for us but also for you to higher profits.

FastnessOffer on the same day delivery within few days. Established processes in combination with fast-short changeover times to satisfy your customers.

Competent consultingAmong the specific challenges of the initial installation to detailed confection for machinery, we will help you individually, and solution-oriented.

Top-QualityWithout question, we have confidence in our quality. Nevertheless, we continiously check the core parameters and mechanicial performance of our products in our laboratory.

A brand of Bode Belting

ATLATOS® The Timing Belt

A brand of Bode Belting

The linear PU timing belt production

Five different equipped, side by side running production lines and a mobile extruder ensure short changeover times.

Production width 150 mm (450 mm) Material: PU (92° Shore A)

Carrier: Steel and Aramid

Flexible arranged cutting widthsStandard: 6 x 25, 9 x 16, 4 x 32, etc.

Metric Pitches: T5, T10, T20, AT5, AT10, AT20, HTD 5M, HTD 8M, HTD 14M, TK10, ATK10, Inch pitches: H, XH, L

Fabric: PAZ / PAR in green and black (antistatic)

A brand of Bode Belting

The Flex PU timing belt production (truly endless - no joint)

Our recently installed Flex production line offers a variety of different pitches and other parameters

Production width 150 mm

Length: min. 1.780 -max. 24.000 mmCarrier: Steel, stainless steel and Aramid

Material: PU (92° Shore A)

Metric Pitches: T10, T20, AT10, AT20 (more to follow soon)

A brand of Bode Belting

The fabrication.

Endless spiral joints

Mechanical processing

Coatings

V-guides Cleats

A brand of Bode Belting

Fingers are punched in the PU timing belts , which are then made endless by heat and pressure.

Welded finger joint connection

The fabrication.Jointing methods.

Mechanical joint

As with the welded joints, we first finger punch each end of the belt when applying a mechanical joint. Between these ends a plastic lacing is welded and also fingerpunched.

The lacing contains a mechanisme, which allows to disconnect the joint at any time. (see picture)

The fabrication.Coatings

The ATLATOS® timing belt can be coated for almost any application with different materials.

A brand of Bode Belting

10A brand of Bode Belting

The fabricationMechanical processing.

Grinding top surfaces

The coated surfaces can be grinded down to desired thicknesses. Next some applications require the coating to be roughened.

Longitudinal and transverse milling

Either in preparation to attach a V-guide rope or for special applications the ATLATOS® timing belt can be milled in both longitudinal as transverse directions.

11A brand of Bode Belting

The fabrication.V-guide ropes.

To track the ATLATOS® timing belt without using flanged pulleys, thermoplastic V-guide ropes are welded by hot air on the timing belt. Available are guide ropes of 6 till 17 mm width.

12A brand of Bode Belting

The fabrication.Cleats.

For conveying applications horizontal or vertical cleats are often welded on the ATLATOS® timing belt.

Thank you for your attention!Please also watch our video on website at

Bode Belting GmbHReeperbahn 3521481 Lauenburg

04153 55 09 5-004153 55 86 75 info@bodebelting.dewww.bodebelting.de

http://www.bodebelting.com/BodeBelting/Ueberuns/index.html