company profile gmbh bedrijfsprofiel.pdf · company profile 02 high speed balanced-opposed...
Post on 25-Sep-2020
5 Views
Preview:
TRANSCRIPT
COMPRESSORS
companyprofile
www.lmf.at
your high pressure solution
companyprofile
02
HIGH SPEED BALANCED-OPPOSED COMPRESSOR
LMF Headquarters in Leobersdorf, Austria
• Air- and water-cooled high pressure piston compressors
• Water-cooled compressors according to API 618, with vertical and balanced-opposed cylinder arrangements, lubricated or non-lubricated
• High speed balanced-opposed compressors
• High pressure compound units• Compound units with integrated
nitrogen separation system• Special compressor units,
produced according to customerspecifications
GEOGRAPHICAL POSITIONLeobersdorf is located approx. 30 km south from the capital of Austria, Vienna and has direct access to the freeways, both to the city of Vienna and to the Vienna International Airport.
your high pressure solution
MAIN PRODUCT LINES
COMPRESSORS
LMF, the leading Austrian manufacturer with over 60 years experience in the compressor business, produces HP piston compressor systems for air, natural gas, technical and industrial gases (process gases) with power rates of up to 6,200 kW (8,300 hp) and pressure rates of up to 700 bar (10,150 psi).LMF‘s high pressure compressor systems are designed according to international standards, using standard
design principles. As a single source LMF offers design, engineering, production, testing under full load, erection, start-up and related services.LMF‘s special modular system makes itpossibletofindtheoptimumsolutionineachspecificcase–bothfromatechnical and an economical point of view. The careful selection of materials and components ensures troublefree operation, even under the most demanding operating conditions.
03
www.lmf.at
contentAPI / TAILOR-MADE 07API 11PAPI 618
MObILE SySTEMS 13Seismic researchPipeline pressure testingPipeline evacuationOn-site nitrogen generation
INDUSTRIAL COMPRESSOR SySTEMS 19CNG/NGV–compressednaturalgasforvehiclesCBG–biomethaneNG–individualcompressorsystemsAir- and watercooledPET applicationsTailormade solutions
Manufacturing, assembly, testing 30After sales services 31
INDUSTRIAL COMPRESSOR SYSTEMS
MOBILE SYSTEMS
TAILOR-MADE
your high pressure solution
AUSTRIAN DURAbILITy
COMPRESSORS
austrian durability
STEP 1: AnalysisLMFmanagement–anditshighlymotivatedteamofqualifiedengineers,workers, sales, service and adminis-tration staff is strongly committed to its clients and partners. LMF is constantly looking for ways and means to improve its customer oriented approach.
STEP 2: DevelopmentJust as much attention is paid to individual customer requirements. Compressor concepts precisely tailored to the demands of our customers are developed using the engineering and high quality know-how of LMF.
STEP 3: ManufacturingLMF invests in modern, computer- controlled machinery in order to meet our customer‘s high quality require-ments. Also every compressor unit is tested in our own testing area, which guarantees fast and smooth start-up at customer‘s site.
STEP 4: Delivery on timeLMF works with a detailed time schedule for projects, in which all milestonesarespecifiedandfollowedup. This guarantees that all deadlines definedbyourcustomersaremet.
STEP 5: ServiceService is of paramount importance. Therefore our service department, trained to the highest standard, pays utmost attention to all requests for service and spare parts.
STEP 6: Perfect solutionPerfect customer cooperation and partnership, targeted project management and customer-oriented after sales and service guarantee theoptimumsolutionforanyspecificcustomer‘s requirements.
04
HIGH SPEED BALANCED-OPPOSED COMPRESSOR
PROJECT PROCESS
your high pressure solutionCOMPRESSORS
05
www.lmf.at
SOPHISTICATED ENGINEERINGAt LMF the most up-to-date engineering aids are used to ensure complete customer satisfaction with regard to optimized selection of mate-rials, calculation, design, engineering and manufacturing.These aids comprise a modern data-bank-based CAE system as well as recognized quality assurance program workflow.Specificconsiderationisgivento the technical documentation for our products, thus maintaining a high standard of quality from quotation up to after sales and service.
SUPPORTED by UP-TO-DATE-COMPUTER PROGRAMSLMF engineering is supported by various software, based on proven and/orcodifiedcalculationmethods.Proprietary programs for the selection and recalculation of reciprocating com-pressors are based on experience over decades and are continuously updated. Several programs for calculating non-
ideal gas properties, among others ChemShare and GPA, are examples of computer programs used by the Engineering Department.
QUALITy STANDARDSLMF compressors are designed and built in accordance with international standards, such as DIN / ISO / VDE, API, ANSI, ASME, BS, NACE, ISC, TEMA, standards for hazardous area appli-cations where there is a potential risk of explosion, the relevant EMC / EMI requirements, as well as all other applicable standards and requirements ofvariousclassificationsocieties,suchas GOST Standard, BV, DNV, GL, LRS, RINA, ABS etc.
Rulesfortheclassificationofshipsandfor mobile offshore units as well as for process decks, especially NORSOK, are also part of LMF‘s quality standard principles.
YOUR SOPHISTICATED ENGINEERING
your high pressure solution
ensures customer expectations
COMPRESSORS
06
TAILOR-MADETAILOR-MADE
your quality product your challenging application
API / TAILOR-MADE
your high pressure solution
API / tailor-made
• API 618 process gas compressors• API 11P compressor packages
07
TAILOR-MADE
www.lmf.at
your high pressure solution
08
your quality product
API 618 process gas compressors
This series is of modular design with six possible piston strokes of 90, 120, 150, 180, 250 and 360 mm, respectively.One to six cylinders are arranged either vertically (in line), horizontally (balanced-opposeddesign),orin“V”configuration.Final pressure rates of up to 250 bar (3,625 psi) in case of non-lubricated
cylinders or 700 bar (10,150 psi) in case of lubricated cylinders are possible.Power ranges between 65 kW (85 hp) –model90–and1,035kW(1,407hp)–model360–percylindercanbeachievedup to a total of 6,200 kW (6 x 1,035 kW or 8,300 hp).
your high pressure solution
PROCESS GAS COMPRESSORS (according to API 618)
flare gas
TwO-STAGE COMPRESSOR UNIT b 154 - 255 S 2.1For compressing HC-gas mixture, balanced-opposed cylinder arrange-ment, min-lubricated.
09
www.lmf.at
high pressure hydrogen
THREE-STAGE COMPRESSOR UNIT T 122 - 310 N 22.5For compressing Hydrogen, vertical cylinder arrangement, non-lubricated.
your high pressure solution
refinery services
THREE-STAGE COMPRESSOR UNIT b 254 - 360 N 3.3
For compressing HC-gas mixture, balanced-opposed cylinder arrangement, non-lubricated.
10
TAILOR-MADE
your high pressure solution
your challenging application
API 618 process gas compressors
natural gas underground storage
ONE-STAGE COMPRESSOR UNIT b 214 - 120 S 12.4
For underground storage and withdrawal of natural gas, package designed for one stage operation, balanced-opposed cylinder arrangement, min-lubricated.
offshore platforms / FPSO
FOUR-STAGE COMPRESSOR UNIT b 254 - 462 S 12
FordisposingCO₂/H₂Sintodedicatedgas injection valves on the sea bed, with stepless flow regulation, balanced-opposed cylinder arrangement, min-lubricated.
11
www.lmf.at
your high pressure solution
boil-off / ethylene
TwO-STAGE COMPRESSOR UNIT b 222 - 274 N 1.6
For a boil-off ethylene recovery system, balanced-opposed cylinder arrangement, non-lubricated,suctiontemperature–65°C.
gas turbine feeding
ONE-STAGE COMPRESSOR UNIT b 222 - 128 N 6.1
For compression of Natural gas, feeding a Rolls-Royce Trend turbine, with stepless flow regulation, balanced-opposed cylinder arrangement, non-lubricated.
your flexible application your optimized unit
MOBILE SYSTEMS
12
MOBILE SYSTEMSMOBILE SYSTEMS
your high pressure solution
mobile systems
• seismic research • pipeline evacuation • pipeline pressure testing • on-site nitrogen generation• mobile gas booster
13
MOBILE SYSTEMS
www.lmf.at
your high pressure solution
14
your flexible application
pipeline evacuation
your high pressure solution
LMF P-Pack 475Delivery1,183Nm³/min(41,778cfm)at29bar(421psi),drivenbya 12-cylinder,475kW,1,800rpmgasengine, containerized, equipped with water / air heat exchanger and control system for automatic operation, for ambient temperatures from–40°Cto+40°C.
LMF P-PACK 750Evacuation pressure from 75 to 6 bar, discharge pressure 75 bar, delivers upto64,500Nm³/hat75barsuctionpressure, driven by a 12-cylinder, 750kW,1,400rpmgasengine,
equipped with water/air heat exchanger, control system for automatic operation, containerized with truck and trailer for ambient temperatures from –40°Cto+35°C.
15
LMF 20sL / 138-175 DHP compound compressor unit for seismic research, balanced opposed booster compressor type BS302-436S21,withsea-/fresh-water heatexchanger,drivenby312kW(420hp), 1,600 rpm diesel engine.
www.lmf.at
your high pressure solution
LMF 51s / 138-207-EHP compound
compressor unit for seismic research, compressor type BS604-317S21,
equipped with sea / fresh-water heat
exchanger, driven by 950 kW electric motor (1,500 rpm).
seismic research
16
your optimized unit
on-site nitrogen generation
LMF designs, manufactures and assembles compressor units according to customer requirements for special applications, e. g.:
• Mobile compressor units for pipeline testing
• Mobile compressor units for pipeline evacuation
• High pressure nitrogen units in containerized portable version with pressures up to 700 bar (10,150 psi) producing nitrogen with a purity of up to 98 percent
• Mobile well service / stimulation-units
• Mobile compressor units for underbalanced drilling
ECOPACK 20 / LMF 47 – 20 / 350-DHP compound compressor unit for nitrogen generation, compressor type
BS302–317S35,containerizedversionwithsound-proofing,truck-mounted.
your high pressure solution
HP COMPRESSOR UNITS FOR MObILE APPLICATIONS
17
www.lmf.at
your high pressure solution
pipeline pressure testing
LMF 67 / 150-DHP compound compressor unit for pipeline pressure testing, compressor typeVCS3421W20, containerized for ambient temperaturesfrom–50°C to+35°C,truck-mounted.
mobile gas booster
LMF bS 604-319 S35.1delivers up to 5,160 Nm³/h (3,210 cfm) at 351 bar (5,090 psi) working pressure, driven by a 12-cylinder, 955 kW, 1,800 rpm diesel engine, equipped with water/air heat
exchanger, control system for automatic operation, containerised with truck and trailer for ambient temperatures from–9°Cto+30°C.
more than 30 years zero emissions meets environmental standards up to 8,000 hours
18
your high pressure solution
INDUSTRIAL COMPRESSOR SYSTEMS
reliable long life cycle pressure tight crankcase
oilfree compression service intervals
INDUSTRIALCOMPRESSOR SYSTEMS
INDUSTRIALCOMPRESSOR SYSTEMS
• CBG – biomethane grid feeding • CNG – compressed natural gas• TM – tailormade compressor system
19
your high pressure solution
industrial compressor systems
www.lmf.atINDUSTRIALCOMPRESSOR SYSTEMS
20
your reliable solution
oilfree and pressure tight solutions for all compressed natural gas / biomethane requirements
• Low space requirement, due to compact design economic installation wittion
•Installationheight<2,5mtoavoidinvestment costs for the compressor enclosure
•Nodynamicloadsduetothebalancedopposed compressor system
•Water-cooledcylindersforoptimumtemperature Management
•Directcouplingforspeedsupto 1,800 / 1,250 rpm in lubricated / non lubricated design possible
•8,000hourServiceintervals•Operationmodewithfrequencyconver-
ter, Bypass and suction valve unloaders •Capacityregulationfrom0upto100%•Noleakageduringoperationandstand-
still period•Oilfreeoperationguaranteedduetonon
lubricated cylinders to safe maintenance costs, Pressure tight crankcase system up to 20 barg helps to safe operational costs and meets Zero emission requirements
your high pressure solution
PRESSURE TIGHT SySTEMS IN CONCRETE ENCLOSURES
INDUSTRIALCOMPRESSOR SYSTEMS
your reliable solution
oilfree and pressure tight solutions for all compressed natural gas / biomethane requirements
21
your high pressure solution
Leckage free grid feeding
bOxER TyPES bS 302D-224 N 4.1
Compression of 1,200 Nm³/h biomethane from4,5upto41bara.
Underground gas storage
in containerized execution
bOxER TyPESSERIES bS 302 -111 N 10.1
Oilfree gas compression from variable suctionpressuresbetween46–70baraupto 100 bara, capacity range from 9,800 upto 17,500 Nm³/h.
non-lubricated compressor bOxER TyPES SERIES bS 302-245 N 1.3Compression of 1,160 Nm³/h biomethane from 1,02 upto 13 bara, Pulsations limited to values of 0,5 peak to peak measured on the suction and discharge side.
www.lmf.at
22
your customized solution
CBG – biomethaneNG – individual compressor systems
CbG / bIOMETHANELMF provides specialized solutions formodern CBG / biomethane processes,using expertise gained through ourlong-term experience of working with natural gas and in designing compression systems for biomethane (grid feeding) and raw biogas (wet gas / sour gas).
LMF also has expert knowledge ofcustomer process system integration.LMF offers a selection of oil-free compression systems for this application with a capacity of up to 6,000 Nm³/h, a suction pressure range from 1 to 50 bar and a power range from 55 to 1,200 kW.
LMF bIOMETHANE GRID FEEDING SySTEM
Small containerized package BS 102-325 N 2.6 with 75 kW main drive for compression of 350 Nm³/h from 1,2 upto 26 bara LxBxH~6,4x3,2x3,6m, weight 15 tons.
your high pressure solutionINDUSTRIALCOMPRESSOR SYSTEMS
your customized solution
CBG – biomethaneNG – individual compressor systems
23
These Systems are designed entirelyaccording to customer requirementson the basis of LMF‘s history andextensive experience in tailor-madesystems. Individual compressorsystems are engineered wheneverparticularrequirementspecificationssuch as high capacity, a wide rangeof suction and discharge pressure,variable capacity control, lightweightbuild packages or economic solutionsfor low service and lifecycle costs aredefined.
The product portfolio is comprised ofbalanced-opposed compressors withupto4cylindersandapowerrange
up to 1,2 MW, able to handle anyrequired suction pressure up to amaximum of 350 bar. The units aredriven by electric motor or gas engineand feature speed control and abypassfunctionformaximumflexibilityand economical operation throughprecision variable capacity control.LMF also supplies auxiliary systemssuch as housings including containersor sound / weather-protecting enclosures,fullyfittedwithgasand firedetectionequipment,HVAC*,lighting etc.
your high pressure solution
NG – INDIVIDUAL COMPRESSOR SySTEMS
*HVAC:heating,ventilatingand air conditioning.
LMF NG – INVIDIDUALCOMPRESSOR SySTEMbS 604 - 213 S 20.1
OffshoreCH4GasLiftCompressorPackage, 600 kW, 2 stages, water-cooled, high-speed balanced-opposed compressor type,4cylinderswithdoubleactingpistons andintermediate distance piece.Specifications:Norsokcom-pliant, offshore application, 60 Hz.
www.lmf.at
24
SERIAL RANGE
your high pressure solution
your optimal compressor your durable compressor
INDUSTRIAL APPLICATIONS
INDUSTRIALCOMPRESSOR SYSTEMS
• air- and water-cooled• PET applications• tailor-made solutions
25
your high pressure solution
industrial compressor systems
www.lmf.at
26
your optimal compressor
air- and water-cooled
V 17 / 5518 L 7 - 42Air-cooledblock,fivestages, fivecylinders.
INDUSTRIAL COMPRESSORSThe compressors are available from 2 to 6 stages, with 2 to 6 single-acting cylinders. For your industrial compressor application LMF supplies a standard compressor from our product portfolio ordesignsaspeciallymodifiedversiontosuityourspecificrequirements.• Compressors with power rates
from3to600kW(4to800hp)• Final pressure rates from 30 to
500bar(435to7,250psi)• Capacities from 7 m³/h up to
1,000m³/h(4to590cfm)underatmospheric inlet conditions
• Medium: air and industrial gases• Lubricated and oil-free
your high pressure solutionINDUSTRIALCOMPRESSOR SYSTEMS
27
V 17 / 5518 L 35Electric driven, direct coupled, 150 m³ / h (88 cfm) at 350 bar (5,076 psi).
V 19 / 5621 L 35Delivery4,570ltr/min(161cfm), working pressure 350 bar (5,075 psi), driven by 110 kW (150 hp) electric motor.
your high pressure solution
www.lmf.at
28
your durable compressor
tailor-made solutions PET applications
CONTAINERIZED VC-b 200 - 40Equipped with C.A.R. system (Compressed Air Recovery).
your high pressure solution
VC-b 250-40Oil-free LMF ECOPET compressor package with a capacity of 1,619 m³ / h (952 cfm).
INDUSTRIALCOMPRESSOR SYSTEMS
29
V7D / 2107 L 4.0Delivery 10m³/h (350 cfm), suctionpressure10bar(145psi), workingpressure40bar(480psi), electric motor 55 kW (75 hp).
NITROGEN COMPRESSOR PACKAGE wITH HP-COMPRESSOR VC 3216 N 6.6Delivery 1,655 m³ / h (980 scfm), working pressure 66 bar (957 psi), drivenby180kW(245hp)electricmotor.
your high pressure solution
www.lmf.at
In order to meet our own high quality requirements as well as those of our customers, we continuously invest in modern, computer-controlled machinery, appliances and tools, electric testing systems and CAD equipment amongst other apparatus. Equally as much attention is paid to training, with ongoing education and motivation programs available for both blue-collar and white-collar employees. A high percentage of the latter have completed a college education or have graduated as engineers.
COMPRESSOR ASSEMbLyThe compressor itself, cabling, terminalboxes and operator panels are allmounted on a single skid. The control systems can either be mounted on the compressor frame or installed in separate, stand-alone cabinets, depending on the requirements of the customer.
COMPRESSOR CONTROL SySTEMSOur sophisticated electronic controlsystems are designed and maintainedbyateamofhighly-qualifiedelectricalengineers using CAD systems andother computer-based programs. Morethan60%ofallLMF compressors areequipped with these systems, which
include programmable logic controls,display panels, annunciators and overallpressure control logics. Also telephonemodems and IP interfaces are suppliedon request in order to facilitate serviceactivities all over the world.
ASSEMbLyCompressor units are assembled inthe highly-equipped LMF assemblyshop in accordance with our high qualityassurance standards.
ТЕSTINGEvery compressor unit is tested in ourown testing area during a four-hourmechanical testrun or under full loadconditions according to contractual specificationsandtherelevantinter-national standards, such as ISO, ASME, DNV, BV, LRS, GL, ect.
ISO 9001:2008LMF‘s Quality Management Systemiscertifiedinaccordancewiththerequirements of ISO 9001:2008withBureauVeritasCertification.Within our production facility in Austriaan Integrated Management System(IMS) for HSE has been established incompliance with the standards EN ISO14001:2009andOHSAS18001:2007.
30
quality competence
manufacturing assembly testing
your high pressure solution
HIGH STANDARDS IN MANUFACTURING & QUALITy ASSURANCE
31
AFTER SALES SERVICEGreat emphasis is placed on aftersales service at LMF, where the utmostattention is paid to all requests forservice and spare parts. Spare partsare delivered as quickly as possible toany required destination, and serviceengineers are sent upon request tooperating sites right around the globe.
MANUALS & TEST CERTIFICATESLMF machines are supplied with test-certificatesandoperatingmanualscontaining comprehensive parts lists,enabling the user to identify and orderany required spare parts with accuracyand speed.
TRAININGLMF also conducts training courses forcustomer operating and maintenancestaff, either on site during start-up or atthe LMF factory.Training handbooks in printed form oron CD-ROM as well as maintenancevideos also contribute to our high levelof customer satisfaction.
assure productivity
www.lmf.at
Inclined-bed models of CNC high power lathes.
your high pressure solution
after sales service
24 h Service Hotline:+43 / 22 56 / 640 64
www.lmf.at
your high pressure solution
Austria Leobersdorfer Maschinenfabrik
Headquarter GmbH & Co.KG
Suedbahnstr. 28
A - 2544 Leobersdorf
phone: + 43 - 2256 - 9001
fax: + 43 - 2256 - 9002
ms - sales @ LMF.at
api - sales @ LMF.at
cng - sales @ LMF.at
ia - sales @ LMF.at
service @ LMF.at
France LMF Office France
france @ LMF.at
Germany LMF Office Germany South /
Switzerland
germany - south @ LMF.at
LMF Office Germany North /
Northern Europe
germany - north @ LMF.at
Russia LMF Office Russia
1 - st Golutvinsky Pereulok
Bld. 6, Floor 6
119180 Moscow
phone: + 7 - 495 - 737 08 73 / 74
fax: + 7 - 495 - 737 08 71
russia @ LMF.at
China LMF Office China
Room 1507, Building C,
Triumph Center, #170 Beiyuan Road
Chaoyang District
Beijing, China
china @ LMF.at
India LMF Office India
india @ LMF.at
Mexico LMF Office Mexico
mexico@LMF.at
United Arab LMF Office United Arab Emirates /
Emirates Middle East
uae @ LMF.at
COMPRESSORS
V 0
.3 /
2013
top related