comment utiliser ce guide d installa how to use this...
Post on 24-Jul-2020
0 Views
Preview:
TRANSCRIPT
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certifi ed technician. Logos and trademarks used here in are the properties of their respective owners.
AVERTISSEMENTEn appuyant sur l’icône d’impression ou sur “impression rapide”, tous les guides d’installation inclus dans cette compilation seront alors imprimés.
Ouvrez le menu des signets et trouvez votre véhicule OU défilez vers le bas jusqu’à ce que vous trouviez le guide d’installation pour votre véhicule.
Imprimez uniquement les pages concernant votre véhicule en les inscrivant dans les paramètres d’impression (menu PRINT).
Installez le Maestro RR en vous référant au guide de votre véhicule.
COMMENT UTILISER CE GUIDE D’INSTALLATION1
2
3
TROUVEZ VOTRE VÉHICULE IMPRIMEZ LES PAGES REQUISES
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certifi ed technician. Logos and trademarks used here in are the properties of their respective owners.
WARNINGPressing the printer icon or “quick printing” this document will print
all of the guides in this compilation.
Open the Bookmarks menu and find your vehicle OR scroll down until you find the install guide for your vehicle.
Print only the pages for your vehicle using the advanced options in the Print menu.
Install your Maestro RR according to the guide for your vehicle.
HOW TO USE THIS INSTALL GUIDE1
2
3
SELECT VEHICLE PRINT PAGES NEEDED
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-HYU01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEHyUNDAI ACCENTBASE 2012-2016
retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
hyundai accent Base 2012-2016
Automotive Data Solutions Inc. © 2016 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
hyundai accent Base 2012-2016
Automotive Data Solutions Inc. © 2016 3
5 4 3 2 110 9 8 7 6
17 16 15 14 1322 21
12 11
24 23 20 19 18
A
HG
A
G
H
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
B- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
STEP 1
STEP 2
STEP 3
STEP 4
WIRING DIAGRAM
NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
CANHCANH
CANLCANL
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
hyundai accent Base 2012-2016
Automotive Data Solutions Inc. © 2016 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Green (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Orange (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 24 pin 04 Yellow/Orange (DATA) Behind radio
SWI Feed B ~ 24 pin 17 Orange (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-HYU01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEHyUNDAI AzERABASE 2006-2011
retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
hyundai azera Base 2006-2011
Automotive Data Solutions Inc. © 2016 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
hyundai azera Base 2006-2011
Automotive Data Solutions Inc. © 2016 3
6 5
8
7
14
13
16 15
2 14 3
10 912 11
18 1720 19
A
HG
A
G
H
3
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
C- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
STEP 1
STEP 2
STEP 3
STEP 4
WIRING DIAGRAM
NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
CANHCANH
CANLCANL
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
hyundai azera Base 2006-2011
Automotive Data Solutions Inc. © 2016 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Black (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Yellow (DATA) OBDII connector, under driver side dash
SWI 1 C ~ 20 pin 05 White (DATA) Behind radio
SWI Feed C ~ 20 pin 06 White/Black (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-HYU01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEHyUNDAI ELANTRA
BASE 2007-2010retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
hyundai elantra Base 2007-2010
Automotive Data Solutions Inc. © 2016 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
hyundai elantra Base 2007-2010
Automotive Data Solutions Inc. © 2016 3
6 5
8
7
14
13
16 15
2 14 3
10 912 11
18 1720 19
A
HG
A
G
H
3
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
C- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
STEP 1
STEP 2
STEP 3
STEP 4
WIRING DIAGRAM
NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
CANHCANH
CANLCANL
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
hyundai elantra Base 2007-2010
Automotive Data Solutions Inc. © 2016 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Yellow (DATA) OBDII connector, under driver side dash
SWI 1 C ~ 20 pin 05 Green (DATA) Behind radio
SWI Feed C ~ 20 pin 06 Black (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-HYU01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEHyUNDAI ELANTRA
BASE 2011-2016retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
hyundai elantra Base 2011-2016
Automotive Data Solutions Inc. © 2016 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
hyundai elantra Base 2011-2016
Automotive Data Solutions Inc. © 2016 3
5 4 3 2 110 9 8 7 6
17 16 15 14 1322 21
12 11
24 23 20 19 18
A
HG
A
G
H
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
B- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
STEP 1
STEP 2
STEP 3
STEP 4
WIRING DIAGRAM
NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
CANHCANH
CANLCANL
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
hyundai elantra Base 2011-2016
Automotive Data Solutions Inc. © 2016 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Yellow (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 24 pin 04 Brown (DATA) Behind radio
SWI Feed B ~ 24 pin 17 Green (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-HYU01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEHyUNDAI ELANTRA TOURING
BASE 2007-2012retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
hyundai elantra touring Base 2007-2012
Automotive Data Solutions Inc. © 2016 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
hyundai elantra touring Base 2007-2012
Automotive Data Solutions Inc. © 2016 3
6 5
8
7
14
13
16 15
2 14 3
10 912 11
18 1720 19
A
HG
A
G
H
3
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
C- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
STEP 1
STEP 2
STEP 3
STEP 4
WIRING DIAGRAM
NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
CANHCANH
CANLCANL
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
hyundai elantra touring Base 2007-2012
Automotive Data Solutions Inc. © 2016 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Yellow (DATA) OBDII connector, under driver side dash
SWI 1 C ~ 20 pin 05 Green (DATA) Behind radio
SWI Feed C ~ 20 pin 06 Black (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-HYU01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEHyUNDAI GENESIS COUPE
BASE 2010-2015retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
hyundai genesis coupe Base 2010-2015
Automotive Data Solutions Inc. © 2016 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
hyundai genesis coupe Base 2010-2015
Automotive Data Solutions Inc. © 2016 3
6 5
8
7
14
13
16 15
2 14 3
10 912 11
18 1720 19
A
HG
A
G
H
3
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
C- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
STEP 1
STEP 2
STEP 3
STEP 4
WIRING DIAGRAM
NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
CANHCANH
CANLCANL
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
hyundai genesis coupe Base 2010-2015
Automotive Data Solutions Inc. © 2016 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Red (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Blue (DATA) OBDII connector, under driver side dash
SWI 1 C ~ 20 pin 05 Brown (DATA) Behind radio
SWI Feed C ~ 20 pin 06 Black/Orange (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-HYU01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEHyUNDAI SANTA FE
BASE 2007-2009retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
hyundai santa Fe Base 2007-2009
Automotive Data Solutions Inc. © 2016 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
hyundai santa Fe Base 2007-2009
Automotive Data Solutions Inc. © 2016 3
6 5 4 37
14 13
2
1
12 11 10 9 8
A
HG
A
G
H
4
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
D- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
STEP 1
STEP 2
STEP 3
STEP 4
WIRING DIAGRAM
NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
CANHCANH
CANLCANL
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
hyundai santa Fe Base 2007-2009
Automotive Data Solutions Inc. © 2016 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Red/Black (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Red (DATA) OBDII connector, under driver side dash
SWI 1 D ~ 20 pin 11 Blue (DATA) Behind radio
SWI Feed D ~ 20 pin 12 Gray (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-HYU01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEHyUNDAI SANTA FE
BASE 2010-2016retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
hyundai santa Fe Base 2010-2016
Automotive Data Solutions Inc. © 2016 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
hyundai santa Fe Base 2010-2016
Automotive Data Solutions Inc. © 2016 3
6 5
8
7
14
13
16 15
2 14 3
10 912 11
18 1720 19
A
HG
A
G
H
3
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
C- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
STEP 1
STEP 2
STEP 3
STEP 4
WIRING DIAGRAM
NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
CANHCANH
CANLCANL
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
hyundai santa Fe Base 2010-2016
Automotive Data Solutions Inc. © 2016 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Blue (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Orange (DATA) OBDII connector, under driver side dash
SWI 1 C ~ 20 pin 05 Blue (DATA) Behind radio
SWI Feed C ~ 20 pin 06 Gray (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-HYU01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEHyUNDAI SONATABASE 2006-2010
retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
hyundai sonata Base 2006-2010
Automotive Data Solutions Inc. © 2016 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
hyundai sonata Base 2006-2010
Automotive Data Solutions Inc. © 2016 3
6 58
7
14 1316 15
21
4 310 912 11
18 1720 1922 2124 23
A
HG
A
G
H
5
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
E- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEEDBLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
STEP 1
STEP 2
STEP 3
STEP 4
WIRING DIAGRAM
NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
CANHCANH
CANLCANL
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
hyundai sonata Base 2006-2010
Automotive Data Solutions Inc. © 2016 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Yellow (DATA) OBDII connector, under driver side dash
SWI 1 E ~ 24 pin 18 Brown (DATA) Behind radio
SWI Feed E ~ 24 pin 19 Green (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-HYU01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEHyUNDAI SONATABASE 2011-2014
retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
hyundai sonata Base 2011-2014
Automotive Data Solutions Inc. © 2016 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
hyundai sonata Base 2011-2014
Automotive Data Solutions Inc. © 2016 3
5 4 3 2 110 9 8 7 6
17 16 15 14 1322 21
12 11
24 23 20 19 18
A
HG
A
G
H
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
B- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
STEP 1
STEP 2
STEP 3
STEP 4
WIRING DIAGRAM
NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
CANHCANH
CANLCANL
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
hyundai sonata Base 2011-2014
Automotive Data Solutions Inc. © 2016 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Yellow (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 24 pin 04 Brown (DATA) Behind radio
SWI Feed B ~ 24 pin 17 Green (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-HYU01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEHyUNDAI TUCSONBASE 2010-2014
retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
hyundai tucson Base 2010-2014
Automotive Data Solutions Inc. © 2016 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
hyundai tucson Base 2010-2014
Automotive Data Solutions Inc. © 2016 3
5 4 3 2 110 9 8 7 6
17 16 15 14 1322 21
12 11
24 23 20 19 18
A
HG
A
G
H
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
B- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
STEP 1
STEP 2
STEP 3
STEP 4
WIRING DIAGRAM
NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
CANHCANH
CANLCANL
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
hyundai tucson Base 2010-2014
Automotive Data Solutions Inc. © 2016 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Green (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Orange (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 24 pin 04 Blue (DATA) Behind radio
SWI Feed B ~ 24 pin 17 Gray (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-HYU01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEHyUNDAI VELOSTER
BASE 2012-2016retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
hyundai Veloster Base 2012-2016
Automotive Data Solutions Inc. © 2016 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
hyundai Veloster Base 2012-2016
Automotive Data Solutions Inc. © 2016 3
5 4 3 2 110 9 8 7 6
17 16 15 14 1322 21
12 11
24 23 20 19 18
A
HG
A
G
H
7
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
B- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
STEP 1
STEP 2
STEP 3
STEP 4
WIRING DIAGRAM
NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
CANHCANH
CANLCANL
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
hyundai Veloster Base 2012-2016
Automotive Data Solutions Inc. © 2016 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Yellow (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 24 pin 05 Gray (DATA) Behind radio
SWI Feed B ~ 24 pin 17 Green (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-HYU01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEHyUNDAI VERACRUz
BASE 2007-2008retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
hyundai Veracruz Base 2007-2008
Automotive Data Solutions Inc. © 2016 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
hyundai Veracruz Base 2007-2008
Automotive Data Solutions Inc. © 2016 3
6 58 7
14 1316 15
2 14 310 912 11
18 1720 1921222324
A
HG
A
G
H
2
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
F- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
STEP 1
STEP 2
STEP 3
STEP 4
WIRING DIAGRAM
NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
CANHCANH
CANLCANL
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
hyundai Veracruz Base 2007-2008
Automotive Data Solutions Inc. © 2016 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Orange (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Blue (DATA) OBDII connector, under driver side dash
SWI 1 F ~ 24 pin 06 Blue (DATA) Behind radio
SWI Feed F ~ 24 pin 18 Blue/Black (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-HYU01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEHyUNDAI VERACRUz
BASE 2009-2013retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
hyundai Veracruz Base 2009-2013
Automotive Data Solutions Inc. © 2016 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
hyundai Veracruz Base 2009-2013
Automotive Data Solutions Inc. © 2016 3
6 5
8
7
14
13
16 15
2 14 3
10 912 11
18 1720 19
A
HG
A
G
H
3
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
C- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
STEP 1
STEP 2
STEP 3
STEP 4
WIRING DIAGRAM
NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
CANHCANH
CANLCANL
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
hyundai Veracruz Base 2009-2013
Automotive Data Solutions Inc. © 2016 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Orange (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Blue (DATA) OBDII connector, under driver side dash
SWI 1 C ~ 20 pin 05 Blue (DATA) Behind radio
SWI Feed C ~ 20 pin 06 Blue/Black (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-HYU01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEKIA AMANTI
BASE 2007-2009retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia amanti Base 2007-2009
Automotive Data Solutions Inc. © 2016 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia amanti Base 2007-2009
Automotive Data Solutions Inc. © 2016 3
6 58 7
14 1316 15
2 14 310 912 11
18 1720 1921222324
A
HG
A
G
H
9
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
F- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
CANHCANH
CANLCANL
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia amanti Base 2007-2009
Automotive Data Solutions Inc. © 2016 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Green (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Orange (DATA) OBDII connector, under driver side dash
SWI 1 F ~ 24 pin 06 Pink (DATA) Behind radio
SWI Feed F ~ 24 pin 18 Brown/Orange (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-HYU01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEKIA AMANTI
JBL 2007-2010retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia amanti JBl 2007-2010
Automotive Data Solutions Inc. © 2016 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia amanti JBl 2007-2010
Automotive Data Solutions Inc. © 2016 3
2 135 46
8 7911 1012
A
HG
A
G
H
12
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
G- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
CANHCANH
CANLCANL
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia amanti JBl 2007-2010
Automotive Data Solutions Inc. © 2016 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Green (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 15 Orange (DATA) OBDII connector, under driver side dash
SWI 1 G ~ 12 pin 05 Yellow/Black (DATA) Behind radio
SWI Feed G ~ 12 pin 06 Brown (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-HYU01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEKIA BORREGO
BASE 2008-2009retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia Borrego Base 2008-2009
Automotive Data Solutions Inc. © 2016 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia Borrego Base 2008-2009
Automotive Data Solutions Inc. © 2016 3
4 3
2 1
6 5
A
HG
A
G
H
13
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
H- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
CANHCANH
CANLCANL
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia Borrego Base 2008-2009
Automotive Data Solutions Inc. © 2016 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Black (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 1 H ~ 06 pin 05 Blue/Black (DATA) Behind radio
SWI Feed H ~ 06 pin 06 Red (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-HYU01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEKIA FORTE
BASE 2010-2013retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia Forte Base 2010-2013
Automotive Data Solutions Inc. © 2016 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia Forte Base 2010-2013
Automotive Data Solutions Inc. © 2016 3
6 5
8
7
14
13
16 15
2 14 3
10 912 11
18 1720 19
A
HG
A
G
H
10
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
C- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
CANHCANH
CANLCANL
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia Forte Base 2010-2013
Automotive Data Solutions Inc. © 2016 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Black (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 1 C ~ 20 pin 16 Green (DATA) Behind radio
SWI Feed C ~ 20 pin 17 Brown/Black (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-HYU01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEKIA FORTE
BASE 2014-2016retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia Forte Base 2014-2016
Automotive Data Solutions Inc. © 2016 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia Forte Base 2014-2016
Automotive Data Solutions Inc. © 2016 3
5 4 3 2 110 9 8 7 6
17 16 15 14 1322 21
12 11
24 23 20 19 18
A
HG
A
G
H
8
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
B- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
CANHCANH
CANLCANL
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia Forte Base 2014-2016
Automotive Data Solutions Inc. © 2016 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Brown (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 24 pin 04 Brown (DATA) Behind radio
SWI Feed B ~ 24 pin 17 Green (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-HYU01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEKIA FORTE KOUPBASE 2010-2013
retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia Forte Koup Base 2010-2013
Automotive Data Solutions Inc. © 2016 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia Forte Koup Base 2010-2013
Automotive Data Solutions Inc. © 2016 3
6 5
8
7
14
13
16 15
2 14 3
10 912 11
18 1720 19
A
HG
A
G
H
10
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
C- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
CANHCANH
CANLCANL
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia Forte Koup Base 2010-2013
Automotive Data Solutions Inc. © 2016 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Black (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 1 C ~ 20 pin 16 Green (DATA) Behind radio
SWI Feed C ~ 20 pin 17 Brown/Black (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-HYU01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEKIA FORTE KOUPBASE 2014-2016
retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia Forte Koup Base 2014-2016
Automotive Data Solutions Inc. © 2016 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia Forte Koup Base 2014-2016
Automotive Data Solutions Inc. © 2016 3
5 4 3 2 110 9 8 7 6
17 16 15 14 1322 21
12 11
24 23 20 19 18
A
HG
A
G
H
8
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
B- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
CANHCANH
CANLCANL
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia Forte Koup Base 2014-2016
Automotive Data Solutions Inc. © 2016 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Brown (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 24 pin 04 Brown (DATA) Behind radio
SWI Feed B ~ 24 pin 17 Green (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-HYU01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEKIA OPTIMA
BASE 2006-2010retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia optima Base 2006-2010
Automotive Data Solutions Inc. © 2016 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia optima Base 2006-2010
Automotive Data Solutions Inc. © 2016 3
6 58 7
14 1316 15
2 14 310 912 11
18 1720 1921222324
A
HG
A
G
H
11
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
F- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEEDBLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
CANHCANH
CANLCANL
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia optima Base 2006-2010
Automotive Data Solutions Inc. © 2016 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Black (DATA) OBDII connector, under driver side dash
SWI 1 F ~ 24 pin 05 Brown (DATA) Behind radio
SWI Feed F ~ 24 pin 06 Green (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-HYU01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEKIA OPTIMA
BASE 2011-2016retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia optima Base 2011-2016
Automotive Data Solutions Inc. © 2016 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia optima Base 2011-2016
Automotive Data Solutions Inc. © 2016 3
5 4 3 2 110 9 8 7 6
17 16 15 14 1322 21
12 11
24 23 20 19 18
A
HG
A
G
H
8
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
B- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
CANHCANH
CANLCANL
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia optima Base 2011-2016
Automotive Data Solutions Inc. © 2016 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Yellow (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 24 pin 04 Brown (DATA) Behind radio
SWI Feed B ~ 24 pin 17 Green (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-HYU01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEKIA RIO
BASE 2008-2011retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia rio Base 2008-2011
Automotive Data Solutions Inc. © 2016 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia rio Base 2008-2011
Automotive Data Solutions Inc. © 2016 3
6 5
8
7
14
13
16 15
2 14 3
10 912 11
18 1720 19
A
HG
A
G
H
10
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
C- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
CANHCANH
CANLCANL
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia rio Base 2008-2011
Automotive Data Solutions Inc. © 2016 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Red (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Blue (DATA) OBDII connector, under driver side dash
SWI 1 C ~ 20 pin 16 Red/Orange (DATA) Behind radio
SWI Feed C ~ 20 pin 17 Yellow/Orange (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-HYU01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEKIA RIO
BASE 2012-2016retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia rio Base 2012-2016
Automotive Data Solutions Inc. © 2016 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia rio Base 2012-2016
Automotive Data Solutions Inc. © 2016 3
5 4 3 2 110 9 8 7 6
17 16 15 14 1322 21
12 11
24 23 20 19 18
A
HG
A
G
H
8
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
B- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
CANHCANH
CANLCANL
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia rio Base 2012-2016
Automotive Data Solutions Inc. © 2016 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Red (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Blue (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 24 pin 04 Pink (DATA) Behind radio
SWI Feed B ~ 24 pin 17 Gray (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-HYU01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEKIA RIO5
BASE 2008-2011retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia rio5 Base 2008-2011
Automotive Data Solutions Inc. © 2016 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia rio5 Base 2008-2011
Automotive Data Solutions Inc. © 2016 3
6 5
8
7
14
13
16 15
2 14 3
10 912 11
18 1720 19
A
HG
A
G
H
10
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
C- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
CANHCANH
CANLCANL
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia rio5 Base 2008-2011
Automotive Data Solutions Inc. © 2016 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Red (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Blue (DATA) OBDII connector, under driver side dash
SWI 1 C ~ 20 pin 16 Red/Orange (DATA) Behind radio
SWI Feed C ~ 20 pin 17 Yellow/Orange (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-HYU01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEKIA RIO5
BASE 2012-2016retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia rio5 Base 2012-2016
Automotive Data Solutions Inc. © 2016 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia rio5 Base 2012-2016
Automotive Data Solutions Inc. © 2016 3
5 4 3 2 110 9 8 7 6
17 16 15 14 1322 21
12 11
24 23 20 19 18
A
HG
A
G
H
8
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
B- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
CANHCANH
CANLCANL
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia rio5 Base 2012-2016
Automotive Data Solutions Inc. © 2016 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Red (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Blue (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 24 pin 04 Pink (DATA) Behind radio
SWI Feed B ~ 24 pin 17 Gray (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-HYU01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEKIA RONDO
BASE 2007-2011retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia rondo Base 2007-2011
Automotive Data Solutions Inc. © 2016 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia rondo Base 2007-2011
Automotive Data Solutions Inc. © 2016 3
6 58 7
14 1316 15
2 14 310 912 11
18 1720 1921222324
A
HG
A
G
H
9
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
F- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
CANHCANH
CANLCANL
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia rondo Base 2007-2011
Automotive Data Solutions Inc. © 2016 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Red (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Blue (DATA) OBDII connector, under driver side dash
SWI 1 F ~ 24 pin 06 White (DATA) Behind radio
SWI Feed F ~ 24 pin 18 White/Black (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-HYU01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEKIA SEDONA
BASE 2009-2012retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia sedona Base 2009-2012
Automotive Data Solutions Inc. © 2016 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia sedona Base 2009-2012
Automotive Data Solutions Inc. © 2016 3
6 5
8
7
14
13
16 15
2 14 3
10 912 11
18 1720 19
A
HG
A
G
H
10
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
C- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
CANHCANH
CANLCANL
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia sedona Base 2009-2012
Automotive Data Solutions Inc. © 2016 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Blue (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Orange (DATA) OBDII connector, under driver side dash
SWI 1 C ~ 20 pin 16 Blue/Black (DATA) Behind radio
SWI Feed C ~ 20 pin 17 Red (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-HYU01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEKIA SORENTO
BASE 2011-2013retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia sorento Base 2011-2013
Automotive Data Solutions Inc. © 2016 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia sorento Base 2011-2013
Automotive Data Solutions Inc. © 2016 3
6 5
8
7
14
13
16 15
2 14 3
10 912 11
18 1720 19
A
HG
A
G
H
10
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
C- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
CANHCANH
CANLCANL
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia sorento Base 2011-2013
Automotive Data Solutions Inc. © 2016 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Red (DATA) OBDII connector, under driver side dash
SWI 1 C ~ 20 pin 16 Blue (DATA) Behind radio
SWI Feed C ~ 20 pin 17 Gray (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-HYU01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEKIA SORENTO
BASE 2014-2015retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia sorento Base 2014-2015
Automotive Data Solutions Inc. © 2016 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia sorento Base 2014-2015
Automotive Data Solutions Inc. © 2016 3
5 4 3 2 110 9 8 7 6
17 16 15 14 1322 21
12 11
24 23 20 19 18
A
HG
A
G
H
8
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
B- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
CANHCANH
CANLCANL
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia sorento Base 2014-2015
Automotive Data Solutions Inc. © 2016 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Red (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 24 pin 04 Blue (DATA) Behind radio
SWI Feed B ~ 24 pin 17 Orange (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-HYU01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEKIA SOUL
BASE 2010-2011retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia soul Base 2010-2011
Automotive Data Solutions Inc. © 2016 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia soul Base 2010-2011
Automotive Data Solutions Inc. © 2016 3
6 5
8
7
14
13
16 15
2 14 3
10 912 11
18 1720 19
A
HG
A
G
H
10
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
C- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
CANHCANH
CANLCANL
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia soul Base 2010-2011
Automotive Data Solutions Inc. © 2016 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Red (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Blue (DATA) OBDII connector, under driver side dash
SWI 1 C ~ 20 pin 16 Orange (DATA) Behind radio
SWI Feed C ~ 20 pin 17 Blue (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-HYU01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEKIA SOUL
BASE 2012-2013retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia soul Base 2012-2013
Automotive Data Solutions Inc. © 2016 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia soul Base 2012-2013
Automotive Data Solutions Inc. © 2016 3
5 4 3 2 110 9 8 7 6
17 16 15 14 1322 21
12 11
24 23 20 19 18
A
HG
A
G
H
8
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
B- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
CANHCANH
CANLCANL
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia soul Base 2012-2013
Automotive Data Solutions Inc. © 2016 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Blue (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Red (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 24 pin 04 Orange (DATA) Behind radio
SWI Feed B ~ 24 pin 17 Blue (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-HYU01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEKIA SOUL
BASE 2014-2016retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia soul Base 2014-2016
Automotive Data Solutions Inc. © 2016 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia soul Base 2014-2016
Automotive Data Solutions Inc. © 2016 3
5 4 3 2 110 9 8 7 6
17 16 15 14 1322 21
12 11
24 23 20 19 18
A
HG
A
G
H
8
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
B- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
CANHCANH
CANLCANL
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia soul Base 2014-2016
Automotive Data Solutions Inc. © 2016 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Brown (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 24 pin 04 Brown (DATA) Behind radio
SWI Feed B ~ 24 pin 17 Green (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-HYU01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEKIA SPORTAGE
BASE 2011-2016retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia sportage Base 2011-2016
Automotive Data Solutions Inc. © 2016 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia sportage Base 2011-2016
Automotive Data Solutions Inc. © 2016 3
5 4 3 2 110 9 8 7 6
17 16 15 14 1322 21
12 11
24 23 20 19 18
A
HG
A
G
H
8
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
B- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
CANHCANH
CANLCANL
ADS-RR(SI)-HYU01-DS maestro.idatalink.com
Kia sportage Base 2011-2016
Automotive Data Solutions Inc. © 2016 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Green (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Orange (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 24 pin 04 Blue (DATA) Behind radio
SWI Feed B ~ 24 pin 17 Gray (-) Behind radio
top related