cleaning procedure tips & for dycem fixed ...tips & advice usa: 1-800 458 0060 uk: +44...
Post on 16-Oct-2020
0 Views
Preview:
TRANSCRIPT
CLEANING PROCEDUREFOR DYCEM FIXED FLOORING
Remove the excess liquid or slurry from the edge of the surface, and collect with a microfibre mop or sponge system. If the removed liquid is dirty, repeat process or increase cleaning frequency
www.dycem-cc.com
TIPS & ADVICE
www.dycem-cc.com
USA: 1-800 458 0060
UK: +44 (0)117 955 9921
info@dycem.com
If using Inspec N10, spray the surface with detergent, ensuring full coverage of the area. Or, use the appropriate cleaner with warm water
Agitate the surface with the Vikan squeegee, until you begin to see the contamination being lifted
Begin by cleaning in a vertical direction as shown Remove the excess liquid or slurry from the edge of the surface, and collect with a microfibre mop or sponge system. If the removed liquid is dirty, repeat process or increase cleaning frequency
Continue to agitate the surface in a horizontal direction as shown
Clean flooring at least once a day to maximise its efficiency. We advise using Inspec N10 detergent and a Vikan squeegee system
1. 2. 3.
4. 5. 6.
Asia: asia@dycem.com
• Clean at least once a day to improve cleaning efficiency, with the following:
• Vikan squeegee system • Inspec N10 pre-diluted • Inspec N10 undiluted (with warm water) • Or, use a Dycem approved cleaner (contact us for a full list) with warm water • After cleaning, wash out the equipment so that it is ready for re-use
• To remove built-up spots of contamination, clean with a 70/30 ispropyl alcohol wipe
• Where decontamination or sterilisation takes place using a phenolic or hydroxide, rinse off as per the instructions (left). Otherwise, a film can develop, reducing the effectiveness of the Dycem
• For heavily contaminated areas, please contact Dycem’s customer service team, who will be happy to discuss the best solution with you
• Do not use concentrated bleaching agents, scouring or abrasive powders, or cleaning machines with stiff brushes. Buffing or polishing machines will damage the surface, shortening the active working life of the flooring
• If you have any questions or concerns, or would like a Dycem deep clean, please get in touch:
CLEANING PROCEDUREFOR LOOSE-LAID DYCEM FLOORING
Ensure both the subfloor and underside of Dycem are completely dry before replacement.Return Dycem to the subfloor, and spray with Inspec N10, ensuring full coverage of the area. Or, use the appropriate cleaner with warm water
Agitate the Dycem surface with the squeegee in a vertical path as before, until you begin to see the contamination being lifted. Repeat this step, continuing the agitation in a horizontal direction
Remove the excess liquid or slurry from the edge of the surface, and collect with a microfibre mop or sponge system. If the removed liquid is dirty, repeat the process or increase cleaning frequency
Turn the Dycem onto its underside, and remove to reveal the subfloor
Clean the subfloor, agitating with the Vikan squeegee in a vertical direction, and remove excess residue/liquid. Repeat horizontally
Clean the underside of the Dycem using an alcohol wipe (70/30 IPA recommended)
2. 3. 1.
4. 5. 6.
TIPS & ADVICE
www.dycem-cc.com
USA: 1-800 458 0060
UK: +44 (0)117 955 9921
info@dycem.com
Asia: asia@dycem.com
• Clean at least once a day to improve cleaning efficiency, with the following:
• Vikan squeegee system • Inspec N10 pre-diluted OR • Inspec N10 undiluted (with warm water) • Or, use a Dycem approved cleaner (contact us for a full list) with warm water • After cleaning, wash out the equipment so that it is ready for re-use
• To remove built-up spots of contamination, clean with a 70/30 ispropyl alcohol wipe
• Where decontamination or sterilisation takes place using a phenolic or hydroxide, rinse off as per the instructions (left). Otherwise, a film can develop, reducing the effectiveness of the Dycem
• For heavily contaminated areas, please contact Dycem’s customer service team, who will be happy to discuss the best solution with you
• Do not use concentrated bleaching agents, scouring or abrasive powders, or cleaning machines with stiff brushes. Buffing or polishing machines will damage the surface, shortening the active working life of the flooring
• If you have any questions or concerns, or would like a Dycem deep clean, please get in touch:
top related