china legal metrology
Post on 12-Jan-2016
79 Views
Preview:
DESCRIPTION
TRANSCRIPT
AQSIQ
China Legal Metrology
Mr. Liu XinminDeputy Director General, Department of MetrologyGeneral Administration of Quality Supervision, Inspection and Quarantine (AQSIQ)
AQSIQ
•Metrology is the science of measurement. It is the action
to realize the unification of measuring units and ensure the
precision and reliability of measuring value. It is an
important technological base of economy construction,
science technology, national defend construction and
society development.
•The government of China pays high attention to
Metrology.
AQSIQ
Outline:
•The History of China Metrology
•The Current System of China Metrology Law
•The Current Legal Metrology Administration of China
•Revise Metrology Law
AQSIQ
The History of China Metrology
Ancient Metrology in China
From ancient times, China begin the measurement of length, area (especially soil area), volume (provision quantity) and quality (weight). Metrology was named weights and measures for a long time in history of China. It means the measurement of length ,capacity and weight. The measuring tool is ruler, scoop and balance.
AQSIQ
In 221 BC, China’s first emperor Qin Shi Huang, immediately after his unification of China, issued a law to uniform weights and measures.During the next two thousands of years, every dynasty continued to use Qin System.
In the middle of 19 century, last of Qing dynasty, meter system was introduced to China.
AQSIQ
China Metrology after the Founding of P.R. China
1950 A weights and measures division was established in the Technical Management Bureau of the Central Finance and Economy Committee
1955 National Bureau of Metrology was established under the State Council
1959 The State Council issued the Decree Concerning the Unification of the System of Measurement and Scheme Concerning the Unification of Name of Metric System Measuring Unit
1965 National Institute of Metrology (NIM) was established1960s
-1980s
191 national primary standards was established
AQSIQ
Sep.6, 1985, Metrology Law was adopted at the 12th Meeting of the Standing Committee of the Sixth National People's Congress and effective as of July 1, 1986. Hundreds of thousands of enterprises in all sectors regulated their metrological management.The “Authentication of Quality Inspection Organs” regulated the measurement and testing activities of nearly 10,000 metrological institutes and laboratories.From 1960s, China joined Meter Convention, OIML, IMECO, COMAR, IAEA/WHO SSDLs, APMP and APLMF etc.
AQSIQ
The Current System of China Metrology Law
Legislation system of China The Legislation Law of China regulates:
legislation includes: law, administrative
statute, local statute, autonomy statute, separate statute and regulation.
AQSIQ
Metrology Legislation
Metrology Law
Local Metrology Rules(28)
Administrative Statutes on Metrology Issued By the State Council
(8)
Metrology Statute of National Defense
Local Metrological Regulations
(5)
Regulations Issued By AQSIQ
(26)
Metrology statute of the Chinese Peoples’
Liberation Army
Part of Metrology In Other Laws
Part of MetrologyIn Other Statutes
AQSIQ
AQSIQ: General Administration of Quality Supervision, Inspection and Quarantine
COSTIND: Commission of Science Technology and Industry for National Defense
BQTS: Bureau of Quality and Technical Supervision
State CouncilState Council
GovernmentsGovernments AQSIQAQSIQ Ministries under Ministries under the State Councilthe State Council
BQTS at BQTS at provincial provincial
levellevel
The The Metrological Metrological
Administrative Administrative Departments Departments of Ministriesof Ministries
BQTS at BQTS at municipal municipal
levellevel
BTQS at BTQS at country country
levellevel
Central Military CommitteeCentral Military Committee
General General Armament Armament
DepartmentDepartment
The The Metrological Metrological
Administrative Administrative Departments Departments of the Armyof the Army
COSTINDCOSTIND
The The Metrological Metrological
Administrative Administrative Departments Departments of COSTINDof COSTIND
AQSIQ
Metrological Traceability System
178 national primary standards at present.Participated in 132 international comparisons and 30 bilateral and multilateral comparisons.
6化学20电离辐射
32光学
2时间频率16无线电
20电磁 12声学
45力学
12热工13几何量
AQSIQ
Metrology Standard
AQSIQ
Reference material There are 1399 kinds of national first-class
reference material and 2575 kinds of national second-class reference material.
There are more than ten thousand information of reference material in the information warehouse which is based by seven countries of China, France, and so on.
AQSIQ
Technical Regulations for Metrology
Technical regulations for Metrology
National Hierarchy schemes for Measuring instruments ( 93 )
National Verification regulationsNational Verification regulations ( 854 )
National Technical regulationsNational Technical regulations ( 170 )Operating Technical regulations of
primary standard (179)
Verification regulations of the Ministry and local
( Ministry 1200 、 local 500 )
AQSIQ
Guarantee SystemTechnical institute for Metrology
NIM
Regional measuringand testing centers(7)
Institutions atProvince level (31)
Institutions atcity level
Institutions atcounty level
National and sector professionalmeasuring stations(19+31)
Local professionalmeasuring stations(1499)
AQSIQ
Personnel Establishment
There are more than 40 thousand metrological verification personnel coming from institutions of legal verification, more than 27 thousand coming from authorized institutions and more than 96 thousand coming from other departments, enterprises and institutions.
From 2006, the rule of Registered Metrological Personnel was issued by AQSIQ and Ministry of Personnel.
AQSIQ
Information
AQSIQ
Propagandize
AQSIQ
Legal Metrology Administration
Legal Measurement Units Legal measurement units include: SI
base units, SI supplementary units, SI derived units with special names and symbols, off-system units adopted by the state, units expressed in term of above mentioned units, and decimal multiples and submultiples of units expressed in terms of prefixes and above mentioned units.
AQSIQ
Administration of new type of
measuring instrument Pattern approval is the assessment for the new type of measuring instrument which has not been produced in the state and is checked by AQSIQ and Quality Technical Supervision Bureau of province level. Prototype testing is the appraisal for new type of measuring instrument which has not been produced in its factory but has the type in the state, being checked by Quality Technical Supervision Bureau of province level. Recently, AQSIQ adopted international current way and unified the pattern approval, type appraisal and prototype testing to pattern approval and pattern appraisal.
AQSIQ
License for Manufacture of Measuring Instrument or License for Repair of Measuring Instrument
Any measuring instrument which satisfied the definition of measuring instrument and is listed in the legal management catalogue is at the range of licence system. Presently, there are 2700 examinations of licence for manufacture of measuring instrument or licence for repair of measuring instrument,There are more than 14000 enterprises having obtained the licence for manufacture of measuring instrument and 3300 enterprises having obtained the licence for repair of measuring instrument in China.
AQSIQ
Pattern approval of imported measuring instrument
Any enterprise or institution engaged in importing or selling imported measuring instruments which are listed in the Imported Pattern Approval Catalogue must apply for pattern approval to AQSIQ.There are 1567 series of product having obtained the certificate of pattern approval of imported measuring instrument and more than 600 series of product having obtained the temporary certificate.
AQSIQ
Verification
2004 2005 2006compulsory verified working measurement instruments
30,000,000
34,000,000 37,300,000
compulsory verified standards
796,000 1,290,000 1,270,000
AQSIQ
Supervision and check on measuring instruments quality
We take national quality supervision and check on measuring instruments involved fare deal, safety defense, medical treatment sanitation every year.
It is mainly to 24 kinds of measuring instruments of water meter, electricity meter, gas meter, greaser, blood-pressure meter etc.
AQSIQ
Supervision of the quantity of pre-packaged products
78. 7%
84. 0%81. 9%
76. 2%
88. 1%88. 9%86. 6%88. 0%
2003年 2004年 2005年 2006年
1季度3季度
AQSIQ
In 2002 , renovation of metrology on farm market and gas station
In 2003 , metrological supervision and inspection on
shop of making glasses In 2004 , metrological supervision and inspection on
restaurant In 2005 , metrological supervision and inspection on
foodstuff , cotton market and coal mine In 2006 , metrological supervision and inspection on
measuring instruments which are used in vehicle checking institutions
Metrology renovate in the market
AQSIQ
The aim of metrology authorization is to make the best of social metrology resource and service to Metrology Law.
It includes authorizing the metrology technical institutions as metrology verified institutions, establishing primary standards, social public standards, taking some work on legal metrology.
Metrology authorization
AQSIQ
According to Metrology Law, metrological dissension is judged by the data of primary standards and social public standards.
Arbitral verification
AQSIQ
Background The regulative range does not adjust to the
need of economic development. Some rules are lag and does not adapt to the
market economic development. The way of value dissemination does not
satisfied with demand of value dissemination from different social field.
The supervision on domestic and overseas product is different.
Administrative admission on metrology is to be perfect.
Legal obligation is so light that can not get the reject usage on irregular behavour.
Revise Metrology Law
AQSIQ
Revise course In 2000, startup.
In 2004, list in the second legislation plan. In 2006, first solicit suggestion by State
Council. In 2007, second solicit suggestion by State
Council.
Revise Metrology Law
AQSIQ
Revise content
Adjust legislation system, unite the mother-law and son-law.
Adjust the regulative range to measuring instrument and product quantity.
Adjust the managing way, the affair inside enterprise and adjusted by market were handed to enterprise and market.
Adjust the managing catalog, unite the three catalogs to one catalog.
Adjust the way of value dissemination to verification and calibration.
Strengthen the management of reference material. Strengthen the law obligation. Encourage measure.
Revise Metrology Law
AQSIQ
Best regards!
Thank you for your attention!
top related