chevrolet aveo 2004-2006 aveo hatchback-2007 suzuki ...chevrolet aveo hatchback - 2007 pontiac g3...
Post on 25-Sep-2020
48 Views
Preview:
TRANSCRIPT
INSTALLATION INSTRUCTIONS FOR PART 99-7951
Phillips Screwdriver • Flat Blade Screwdriver Or Panel Removal Tool
1-800-221-0932 www.metraonline.com
KIT FEATURES
© COPYRIGHT 2004-07 METRA ELECTRONICS CORPORATION
APPLICATIONS
• DIN Head Unit Provision with pocket • ISO DIN Head Unit Provision with pocket
A) Radio Housing • B) ISO Brackets • C) Trim Plate
KIT COMPONENTS
TOOLS REQUIRED:
99-7951
A B C
CHEVROLETAveo 2004-2006
Aveo Hatchback-2007SUZUKI
Forenza 2004-2007Reno 2005-2007
Verona 2004-2007PONTIAC
G3 Hatchback-2007
TABLE OF CONTENTS
99-7951
• Dash Disassembly- Suzuki Verona 2004 - 2007 ---------------------------------------- 1- Chevrolet Aveo 2004 - 2006 --------------------------------------- 2- Chevrolet Aveo Hatchback - 2007 --------------------------------- 2
- Pontiac G3 Hatchback - 2007 -------------------------------------- 2
- Suzuki Forenza 2004 - 2007 -------------------------------------- 3- Suzuki Reno 2005 - 2007 -------------------------------------------3
•Kit AssemblyChevrolet Aveo/Aveo Hatchback/Pontiac Hatchback/Suzuki Verona :- DIN Head Unit Provision with Pocket ------------------------------ 4- ISO Head Unit Provision with Pocket ------------------------------ 5
Suzuki Forenza /Suzuki Reno :- DIN Head Unit Provision with Pocket ------------------------------ 6- ISO Head Unit Provision with Pocket ------------------------------ 7
•Final Assembly ------------------------------------------------------ 8
1
99-7951
1
2
Remove (4) Phillips screws holdingradio to remove. (Figure B)
Unclip and remove the trim platepanel surrounding the radio. (Figure A)
Disconnect the negative battery termi-nal to prevent an accidental short cir-cuit.
3
DASH DISASSEMBLY
SUZUKI VERONA 2004 - 2007
A
B
2
99-7951 DASH DISASSEMBLY
Remove (4) Phillips screws fromradio to remove. (Figure B)
3
Disconnect the negative batteryterminal to prevent an accidentalshort circuit.
1
Unclip and remove the trim panelsfrom both sides of radio/climate con-trols. (Figure A)
2
A
B
CHEVROLET AVEO 2004 - 2006 CHEVROLET AVEO HATCHBACK - 2007
PONTIAC G3 HATCHBACK - 2007
3
99-7951 DASH DISASSEMBLY
Disconnect temperature selectorcable on passenger side of centerconsole behind glove box. (Figure C)
3
Unsnap and remove entire panel sur-rounding radio. Note: The clips hold-ing radio panel to dash are verystrong. (Figure D)
4
Remove (4) 10 MM bolts securingradio to remove. (Figure E)
5
Disconnect air selector cable ondrivers side of center console behinddash above accelerator pedal.(Figure A & B)
1
Open glove box and remove (5)Phillips screws ((3) on top and (2) onbottom) then remove entire glove.
2
A
B
Inside of Glove Box
C
E
AM/FM
TAPE
CDTUNE
1 2 3
4 5 6
BASS
MUTE
EQ
AST
SCAN
D
SUZUKI FORENZA 2004-07SUZUKI RENO 2005-07
4
99-7951 KIT ASSEMBLY
Slide the aftermarket head unit intothe cage and secure. (Figure C)
3
Cut and remove front lowermounting tabs from radio housing.(Figure A)
1
Slide the DIN cage into the RadioHousing and secure by bendingthe metal locking tabs down.(Figure B)
2
DIN HEAD UNIT PROVISION
A
B
C
CHEVROLET AVEO 2004 - 2006 CHEVROLET AVEO HATCHBACK - 2007
PONTIAC G3 HATCHBACK - 2007
SUZUKI VERONA 2004-2007
5
99-7951 KIT ASSEMBLY
Snap the Trim plate into the RadioHousing. (Figure C)
4
Mount the ISO Brackets to thehead unit with the screws sup-plied with the unit. (Figure B)
2
Slide the head unit into the radioopening until the side clips engage.(Figure C)
3
ISO DIN HEAD UNIT PROVISION
A
B
C
Cut and remove front lowermounting tabs from radio housing.(Figure A)
1
CHEVROLET AVEO 2004 - 2006 CHEVROLET AVEO HATCHBACK - 2007
PONTIAC G3 HATCHBACK - 2007SUZUKI VERONA 2004-2007
6
99-7951 KIT ASSEMBLY
Slide the aftermarket head unit intothe cage and secure. (Figure C)
3
Cut and remove rear lower mount-ing tabs from radio housing.(Figure A)
1
Slide the DIN cage into the RadioHousing and secure by bendingthe metal locking tabs down.(Figure B)
2
DIN HEAD UNIT PROVISION WITH POCKET
SUZUKI FORENZA 2004-2007SUZUKI RENO 2005-2007
A
B
C
7
99-7951 KIT ASSEMBLY
Snap the Trim plate into the RadioHousing. (Figure C)
4
Mount the ISO Brackets to thehead unit with the screws sup-plied with the unit. (Figure B)
2
Slide the head unit into the radioopening until the side clips engage.(Figure C)
3
ISO DIN HEAD UNIT PROVISION
A
C
B
SUZUKI FORENZA 2004-2007SUZUKI RENO 2005-2007
Cut and remove rear lower mount-ing tabs from radio housing.(Figure A)
1
8
FINAL ASSEMBLY
Make wiring connections using the EIA color code chart shown below and the instructions included with the headunit. Metra recommends making connections as shown below; Strip, Splice, Solder, Tape. Isolate and individuallytape off ends of any unused wires to prevent electrical short circuit.
FINAL WIRING CONNECTIONS
99-7951 FINAL ASSEMBLY
12V Ignition / Acc . . . Red
12V Batt / Memory . . Yellow
Ground . . . . . . . . . . . Black*
Power Antenna . . . . . Blue
Amp Turn-On . . . . . . Blue / White
Amp Ground . . . . . . . Black / White
Illumination. . . . . . . . Orange
Dimmer . . . . . . . . . . Orange / White
Right Front (+) . . . . . Gray
Right Front (-) . . . . . . Gray/ Black
Left Front (+) . . . . . . White
Left Front (-) . . . . . . . White / Black
Right Rear (+). . . . . . Violet
Right Rear (-) . . . . . . Violet / Black
Left Rear (+). . . . . . . Green
Left Rear (-) . . . . . . . Green / Black
METRA / EIA WIRING CODE
*NOTE: When a Black wire is not present, ground radio to vehicle chassis.All colors may not be present on all leads due to manufacturer’s specifications.
1 Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter and making connections as shown. (Isolate and individuallytape off the ends of any unused wires to prevent electrical short circuit.)
2 Re-connect the negative battery terminal and test the unit for proper operation.
3 Snap radio housing assembly into factory radio opening.
A
A) Strip wire ends back 1/2"
B) Twist ends together
C) Solder
D) Tape
B
C
D
9
NOTES
99-7951
99-7951 INSTRUCTIONS
1-800-221-0932 www.metraonline.com
REV. 06/20/07 © COPYRIGHT 2004-07 METRA ELECTRONICS CORPORATION INST99-7951
top related