chapter-2 introduction to benchmarking …...benchmarking continue to grow in number and diversity...
Post on 23-Jun-2020
20 Views
Preview:
TRANSCRIPT
C H A PT E R - 2
INTRODUCTION TO BENCHMARKING AND LITERATURE REVIEW
2.1.INTRODUCTION TO BENCHMARKING
Benchmarking is now regarded as a vital tool in the quality toolbox and the applications of
benchmarking continue to grow in number and diversity as reflected in the literature. The
last two decades have witnessed a surge in the quest for quality as the markets are shrinking
due to stiff competition. This sustained interest on using the technique o f benchmarking to
improve quality has resulted in a surfeit o f articles and books.
Decision-makers are constantly on the look out for new techniques, to enable quality
improvement. While benchmarking, as a technique for quality improvement is not new or
unknown, it has now found more subscribers, and occupies a prominent place in the action
agenda. Quite often, the benchmarking concept is understood to be an act o f imitating or
copying. But in reality this proves to be a concept that helps in innovation rather than
imitation, as stated by Thompson, et. al. (1997).
2.2. BENCHMARKING - CONCEPTS
2.2.1. A short history of benchmarking
Throughout history, people have developed methods and tools for setting,
maintaining and improving standards o f performance. One can trace the desire to improve
performance and the actual process o f improvement as far back as the early civilizations; the
ancient Greeks left us with exemplary works o f architecture, art and design. The Romans
who built upon the achievements o f both Egyptians and Greeks by developing the ability to
construct bridges and roads to standardised designs. In a real sense, benchmarking is a
natural evolution from principles o f Quality Measurement and TQM.
The early benchmarking phase began in the late 1950s. The Japanese visited many
thousands o f companies round the world, mainly in America and Western Europe,
specifically to absorb ideas that they could adopt and improve upon their manufacturing
14
processes. The Japanese investigated Western products and processes to understand their
good and bad features, and build superior alternatives at lower cost.
According to Camp (1993), benchmarking originated in the late 1970s in America
when the Xerox Corporation adopted a similar vigorous approach in 1979. During this time,
the Xerox business plummeted due to competition from Japan. Then, Xerox felt they had no
choice. Their competitors were able to sell products more cheaply than Xerox could make
them. To understand why this was, the product features and performance capabilities o f
competitive machines were rigorously evaluated and Xerox was able to investigate the
practices o f Fuji Xerox in Japan. The improvement opportunities that were identified and put
into place resulted in a swift turn around for Xerox’s fortunes and led to Best Practice
Benchmarking becoming a central part o f X erox’s business strategy. In the year 1982, Xerox
benchmarked its logistics and distribution unit against retailer L.L.Bean to improve its
warehousing and material handling operations.
In 1985, Metro Toronto Reference library in Toronto, Canada conducted the first
known library benchmarking study o f its public service department. In the year 1991, the
term “benchmark” was added to the guidelines for the prestigious ‘Malcolm Balridge’ award
and benchmarking became a qualifying condition for companies aiming at this award.
Benchmarking as a research strategy emerged in the 1990s, in the business sector. The
American Productivity and Quality Center (APQC) opened its ‘International Benchmarking
Clearinghouse’ in the year 1992.
The history o f benchmarking as described by Watson (1993) has been categorised
under five generations o f benchmarking. The first generation was reverse engineering, which
was an engineering-based approach to product comparisons that included teardown and
analysis o f technical product characteristics. The second generation was competitive
benchmarking which Xerox refined starting in 1976. This type o f benchmarking went
beyond product-orientation comparisons to comparing processes with competitors. In the
1980s, the third generation o f benchmarking was process benchmarking, which included
searching for best practices across industry boundaries. The fourth generation benchmarking
was strategic benchmarking; where it was used to fundamentally change the business, not
just alter the processes. Lastly, the fifth generation was global benchmarking, where
15
international trade, cultural and business process distinctions among companies are abridged
and their implications for business process improvement are understood.
Till date, benchmarking has naturally evolved as a technique encompassing concepts
o f competitor and market analysis, quality improvement programmes, performance
measurement and, perhaps most o f all, Japanese practices.
In summary, it can be said that the origins o f benchmarking, in one sense, be traced to
the early method o f examining products o f competitors to see how they are made and how
they could be made, whether the same or better.
2.2.2. Benchmarking - Meaning and definitions
Benchmarking as a Verb refers to a process o f comparing agencies’ operations and
performance against recognised standards and improving those operations to enhance the
effectiveness.
A benchmark as a Noun refers to the numerical target or reference point for taking
measures against.
This word has migrated into the business world, where it has come to mean: “A
benchmark is a measured best-in-class achievement recognised as the standard o f excellence
for that business process” .
According to W ebster’s dictionary (1990), the word benchmark has its origin from
geographic surveying, where it means “A marked point o f known or assumed elevation from
which other elevations may be established”.
The International Clearinghouse for Benchmarking (1992) defined benchmarking as the
“process o f continuously comparing and measuring an organisation with business leaders
anywhere in the world to gain information that will help the organisation take action to
improve its performance” .
As stated by Me Nair and Leibfried (1992), “To benchmark is to shrug o ff history and to
embrace the future.
Andersen (1994) states the generic definition, as “Benchmarking is the process o f
comparing something or someone with best practice” .
Best practices are collections o f activities within an organisation that are done very well and
ultimately, are recognised as such by others.
16
According to the APQC (1997), benchmarking is “the process o f identifying,
understanding and adapting outstanding practices from other organisations to help an
organisation improve performance” .
The core o f the current benchmarking interpretation is;
■ M easurement o f own and the benchmarking partners’ performance level, both for comparison and for registering improvements. Comparison, o f performance levels, processes, practices etc.
■ Learning, from the benchmarking partners to introduce improvements in one’s own organisation.
■ Improvements as the ultimate objective o f any benchmarking study. Improvements encompass incremental change, major steps and innovations.
The concept o f benchmarking, like TQM, has the concept o f the internal business process
as one o f its central ingredients. The crucial internal processes o f the business need to be
identified, and measures and measurement points have to be established. Comparisons in
processes and process performance have to be made externally, as well as internally, and
process improvements need to be put in place.
In a nutshell, benchmarking is an advanced quality improvement methodology, which
may be integrated into a TQM system. It is the most important contribution by the Western
world to quality improvement methodology, since the foundations o f quality revolution were
laid by W alter A. Shewhart, Dr. Williams Edward Deming and Dr. Joseph Juran.
2.2.3. The need for External Comparisons
Today, competition is on the global level for many businesses and in many critical areas,
the only sensible goals are the ‘W orld’s best practice’. For many other companies,
competing in smaller arenas, the targets may mot always be as stringent, but the need for
realistic goal setting is just as important. Benchmarking is a method o f making sure that the
targets aimed for are relevant to market demands. The technique is equally applicable in
manufacturing and service organisations.
Making comparisons with competitors is not a new idea. Acquiring data about how
competitors are performing, what their product range comprises, what prices are they able to
command, and perhaps their operating methods, has always been part o f a businesses modus
operandi. Thus benchmarking is a highly - respected proactive management tool which is
17
increasingly being used to identify and focus improvement activities with the goal o f
international competitiveness.
2.2.4. Benchmarking Barriers and Misconceptions
Gift, et.al. (1994) have reported a few reasons for not conducting benchmarking. The
barriers identified include:
• Lack o f action• Not involving the appropriate people (process owners)• Not understanding that learning can happen even without inventing it.• Lack o f understanding the internal processes• W eak leadership• Inability to see opportunity to improve• Organisation not promoting entrepreneurial behaviors, innovation or risk taking• Failure to see need for change
As benchmarking emerged, an organisation that conducted any type o f comparisons, such
as comparing data with national norms, competitive analysis, or unstructured discussions
with counterparts in other organisations, claimed it was benchmarking, as reported by
Keehley (1997). A quantitative comparison o f performance is only a small part of
benchmarking process. An organisation needs to define the true meaning, role, and use of
benchmarking in its own environment, including how it uses comparative data, as stated by
Gift (1996).
Common misconceptions for benchmarking can be commonly grouped under the
following:
• Benchmarking leads to rating and ranking o f performance• Participation in benchmarking is revealing trade secrets that would lead to compromising
competitive advantage.• Benchmarking leads to explicit cause-effect relationships with best practices.• Benchmarking is a panacea.• It is a one-time programme• It is a reactive tool• Benchmarking is just copying others.
In summary, benchmarking is not simply data comparison, a fad, a means for reducing
resources, a quick-fix program, or consolidation o f visits to different industrial
establishments. Benchmarking is a means o f doing business, a continuous and disciplined
management process with a structured methodology.
18
2.3. BENCHMARKING MODELS
2.3.1. Requirements for a successful benchmarking Model
A benchmarking model should have logical flow o f ideas. The attributes o f the model
should be clear so that people can describe it to others and the listener can understand in
order to translate into action.
A benchmarking model should have the following requirements built in:
• A clear understanding o f benchmarking requirements• Identification o f benchmarking team• Use o f effective project planning tools and techniques• The model has to create a set o f expectations regarding the information; how it is to be
gathered, reported and used to review and adjust progress o f activity.• Identification and analysis o f gaps.• Feed back provision to take action and recycle.
2.3.2. A review of Benchmarking Models
Benchmarking is usually treated as a structured process. The structure is best provided by
the development o f a step-by-step model. The process models provide structure so that the
user can see the benchmarking route. They provide a common process in a language
understandable to all, by allowing a basic framework for successful planning and execution
o f a benchmarking exercise.
The literature has frequently cited benchmarking models. A few profound models have
been noted for review. It is also true that every organisation will approach the benchmarking
process from its own perspective and will need to customise the generic benchmarking model
accordingly. A few o f the models reviewed are:
• The Camp Model• M eta-model developed by International Benchmarking Clearinghouse• Baxter Benchmarking Model• Spendolini’s 5-stage Benchmarking Process• Watson Model• Leibfried and Me Nair Model• Benchmarking process Model• The APQC Model
19
Each o f these models have exhibited benchmarking as a continuous process with
successive phases being critical to the successful execution o f the process. A B rief summary
o f these models is given in Table. 2.1.
Table - 2.1. Summary o f Benchmarking Models
NAM E OF THE MODEL STEPS/STAGES REMARKSa. Camp M odel (1989)- Also called the Xerox’s 10 step model
PlanningAnalysisIntegrationAction
Extremely detailed Leaves no flexibility in terms o f chosen procedure__________
b. Generic “M eta-M odel”- Depicted by Andersen (1994)- Developed byInternational Benchmarking Clearinghouse (IBC)_______
PlanCollectAnalyseAdapt/Improve
Information given in the model is extremely limited Can be structured to suit the needs o f the user
c. Baxter Benchmarking Model- Developed by Baxter Corporate Consulting- Portrayed by Lenz, S., et.al. ((1994)- 15 Steps model_________
Preparation Phase: 5 StepsAnalysis Phase:10 Steps
Model is based on the premise that the best ideas come from people who are closest to the process
d. Spendoloni’s Five - Stage Benchmarking Process- Model conceived by Spendoloni(1992)- 5 Stage Model
Determine what to benchmark Form abenchmarking team Identify benchmarking partnersCollect and analyse benchmarking information Take action
A Circular model Model portrays concept o f ‘Recycling’ to denote the concept o f continuous improvement
NAME OF THE MODEL STEPS/STAGES REMARKSIt contains fewer steps than the Camp-model Describes all steps in a complete benchmarking study
e. The W atson - Model- Developed by Watson (1992)- Six Steps Model
PlanSearchObserveAnalyseAdaptImprove
20
Summary of Benchmarking Models jContd..]
f. The Leibfried and M cNair - Model- Model put-forth by M cNair and LeibFried (1992)
Identify core issues Internal baseline dataExternal DataCollectionAnalysisChange Implement
Based on a logical sequence to the learning process that is embedded in benchmarking It is more a system’s model with input / output criteria______
g. Benchm arking Process Model- Also called the “Benchmarking W heel”- A Circular modeldepicting 5 steps_________
PlanSearchObserveAnalyseAdapt
Similar to Spendoloni’s Five State benchmarking processSteps are similar to the W atson Model
h. The APOC Model- The Benchmarking M anagement Guide (1993) published by the American Productivity and Quality Center (APQC) proposed a four-phased benchmarking methodology as a generic approach to benchmarking.
PlanCollectAnalyseAdapt/Improve
This model is similar to the ‘meta- m odel’Follows the ‘plan-do-check-act’sequence
In summary, it can be said that models merely contributed structure and a common
language for a process. These models in the literature review showed benchmarking to be a
planned, formal, and structured process. Further, there should always be some flexibility
built into any process or model to accommodate situational variation.
2.4. TYPES OF BENCHMARKING
Literature does not suggest consensus on the types o f benchmarking. A number of
authors seem to capture different categories o f benchmarking. However, in general there are
four types o f benchmarking:
• Internal Benchmarking
Internal benchmarking means comparison o f internal operations between different divisions
or similar functions in different operating units within an organisation. Internal
21
benchmarking compares similar internal functions within an organisation, and it often serves
as a pilot project for conducting external benchmarking.
• Competitive Benchmarking
Competitive benchmarking compares a work process with that o f the best competitor in the
same market. It reveals the performance measure levels to be surpassed. Competitive
benchmarking is basically benchmarking against external direct product competitors.
• Functional Benchmarking
Functional benchmarking compares a work function to that o f the functional leader in the
same industry or cross-industry. Functional benchmarking is done with functional
competitors or industry leader firms, even if the industries themselves are dissimilar.
• Generic Benchmarking
This focuses on the best work processes. Instead o f focusing on a company’s business
practices, similar procedures and functions are benchmarked.
Further, as reported by Zairi and Pervaiz (1999), one recent categorisation has been from
the European Commission initiative that proposes three levels in benchmarking:
• Company• Sectorial• Benchmarking o f framework conditions.
Table 2.2. shows the different categories o f benchmarking. It is clear that at the moment
several varieties o f benchmarking exist and there could be some overlapping also. However
it is pertinent here to look at the categories as suggested by different authors.
22
IM]S
fc.ae
JSwaV
Xi Cm
O
ao
•(-»«
’ CoOX)
58U
cV
.4 >
- o
611SVoJS
J isa
H
r i
r 4
—l o
RH
DXlfi2h<« sS
JS(JGV
ca
O(AVa
H
sn
' £O
.13P
<
g 13O Q
O W)
\ s *So ti
o
g o q ?
T 3U1/23
v :
B'>2c xS
c/50>COCO(L )0
1
I3-°5
C - s ;
§os: 05
I0 0 'Ma I
o c
■ S O o C3
• r - <UU-c>
O h t/3
a- Il-H P 4
O
|.S . a c
IIC3 ^ c/3 ^ (D CO
c3 o & c fi -g o gO X 5
1§
o q
It j
1 )o DOB G
(UD ,
Booo3
CO - 5 VIdo
^4-Ho§ o ^ e
.2 c3 .2S e ^►H O O O
1S
- s ;
C
c q
ac
ao
T3 cl
I'S'§1S.I
C/3 COJCO:3
a S -*-»
CO - g
g ) § g
. S CO §5 .2d (U - P
& . S 2I § B.a x> o
T3§O Ss . 2
I D CH-1
O
■ i i WV (5C U g j
_ 25
\ s g2 ^ S^ CO
3
H
C/l
sO o03
C
,/5 O(U & 0
' Oc30 )
-»-*IZIC
Ir : : c
S -2CO o
r. aCO a(U C J
03
^ wCO(D CO'• 3
(J 0 , ^ 2
I -Cu ^CO b
<U T 3a.j=i (j
<D
3- D
O c i : o> G . ^
b
I I ' SQ i c -« ■2 ^
^ cCO *^2
•S 8t3 -*->n.B P
rrtU a o W )
^ a1 ) >-» G h : : 3
•- B^ 5
H (u
= 2 0 - ^
c3£30• 3UC
cS-4-*D
't/I 75<U a'I _o(X 'SB <u0 a.0 0
Isos:
c q
t j u
3T3 <D
t3 tn(U J- OT O 3 . t i
g I
G
CO
o
" 3 M o <u 0 0 ' g0) c3S I
S
e I^ aX o fU u
>a ^ JS y\
^ 1*2 B■S o . ^ 0 0
s .s s
o .
So<L>
Bw o
a
S- s ;
oc
0 5• - ^
a
£
in Cc o■5 .2 2
b O.2 2
00 r Cc H
c3 CB .2
- C - y o 5 c 1»
COg .
(Uo
.S (L)CO ^
sH c/1
c 2 • -
^ D .- e
c ° B o■55 t ?
4> O
^ E
1>J O
' «c «
• S Of) O u
l - is iTZi U
. § 1 CO T3
3 t-S o ON
W w
BOuM)13h i«suSV.o
IZ)eo• mt
•SS
cOD
•M
•Mf l0>
jS•p«"aODS
o,£3W3
Zc s
H
W)aav<«sJ3uBuCO
VI<ua
s<
-I§
o q
a
t 3 1)
II -
C/5(UX)«;ri
V3D rn
& C->E CJ 8 ^
~C oiI
cn;3'§
•a ^ § S3
E? ga(U
DO O
Co «5
S ^
<0 oq
IS
I
2o
U(U «Oh O
C / 3 U
I I
c3 00 ,a
"to UIS O i3 O
■ r~ >>"0>-i —< o c/] g g .§ OC C rv >-» oO O ^ U gO O -C' Ph
G
s-s:0 c0 3
"q1 I"w)C«BOo
(50ONON
bo
K “ 1aIs:
T3Oc/53
(U0>(/)c/5Co
<u-12
T3CC3
20 )
(U>sB - _
6 2 <U
2 o
1 )O
a
H .
t * r -C E
!s «ES(U
T D
S 2 ° I t;
cn -o(L> u
"5 5c3 cd O C ^^ e
S :• *-H y— CC (11 OCiD cd ^ r v CL)»'> u I <U
S *-■ - G OC C3 60 O(U r “ * -^ 3CD’S -C
Ifa .
00 <L) C
I 'I^ <L> _O ^ o C3 bl)§*1 §•§•?=o
VIC0
1gfo
ioo
CO3C Jo
U h
>Ia^ —
1 3
o f l i -<-* cio ^ * c
G ^ u
c n ,^ nw . 2c/3 -P
2 ^ a a
D < t o O C
■^i'Si^ ^ S' h (U =3 ^
l l « | 1 2 i -S I I o :3 S
cVho 00
O Q C
l l -
^> gcd
B ^ BS c S 6 3 (Ur-<
w cS h S & S o S <U (D b O X )
. UC
. A ^ V3 t 2 o&C ^S ° o
O I
C/3 C/3
. s*C/3
tC b ^
o■-S " S °
§ ‘ I -s. ^
c/3
o c 'is X) o
CO
as;o
t sc
CO
C XsoO
<+-i ^ O o
(U
c
C3 O
l - s 3
- §
T 3
§
«/3C/3
- 27 3
(N
Ic j
00
• d oI ^& ! t ! u g O X ) o X 3o « O S So & s a ^
COco
S2o-♦-*
teoo
iL, (u c3 ,o o & t : ss J->
<uC l.
o to o .S2 T 3 CS
T3
§]Vh
*c3
N'3 ON
N Dh
aoUM)a-2h.sssJSue:Vja1/3s:0rt.2
1•4irt
C|>fl0»
"Bec fi • »*I.£3sn0>CSH
6fiS
OSBjiwa<uCQ
<»&
OJ =-4-f3<
s; 2•2 I t; ^ c c
oq
• i a JS s
O CX5
*(UV2X>(U
GO(U>OC^ a ° 313 -s ^ - o ^
s .s I J I
H 8 §,-K 3 .s I M
o 11s p a 0 X ^ 3
P . t i T3
CO>
o1
»-H »-•"oK_
o od • t-N 00
.s-4-J<D
t
00
§ :2
i lc3 3 (X o
00•c ? 00 o a5 o(U u
o o o
>o(1
I o I I I I I I I 1S c p ^ u:: .2tn (L)* O V S'?? y W’z' H n
I§1o^ s: 'ij
(U o§ s ^
^ ^ E "Q o g
C I-Ic« Ocn CO S
•d a S I M s o S .S c
i p l g l la. > cd X) x> >-) :>
(U . H COCO
In an interview to the journal ‘Management Review’ [Anonymous-l (1994)], Juran used an
interesting anecdote to describe functional benchmarking. Early in the century, some German
generals decided to follow an American circus to learn about deployment. In those days, the
circus performed under tents, moved from city to city in a short period o f time transporting all
kinds o f people, animals, and gear, and were very efficient at it. The military had the same
problem, moving large numbers o f horses, tents, ammunition, and food. The generals conducted
functional benchmarking with a circus, an operation not related to army.
2.5. BENCHMARKING - A LITERATURE REVIEW
Many authors have contributed to the literature on benchmarking resulting in more than 350
publications as o f June 2002. Considering the growth o f publications, some attempts have been
made in the past to review the literature. However, the present attempt as a part o f the research
work is different from the earlier reviews and more broad based in coverage. This review of
literature, covers the following objectives:
" Arranging the publications in an orderly manner to enable easy and quick search " Classification o f literature " Scrutiny o f outcome o f publications" Identifying gaps and providing hints for further research.
The review process first starts by providing a comparison among the earlier reviews on
benclimarking and highlights the outcome in each case. Next, a new methodology for classifying
the literature is suggested. The growth and categorisation o f publications are presented in a
graphical form for easy understanding.
2.5.1.Earlier Reviews o f Literature on Benchmarking
It was found out during the current research that at least six literature reviews have been
made in the past and all but one were studied by the authors. The different reviews in
chronological order are:
1) “Roadmap to Current Benchmarking Literature” ., Andrew E.Jackson Robert R. Safford
and W illiam W.Swart, 1994, Journal o f Management in Engineering., November /
December., pp: 60-67.
26
2)a. “A Review o f key publications on Benchmarking: Part I” ., M ohamed Zairi, and
M ohamed A.Youssef, 1995., Benchmarking for Quality Management and Technology,
V o l.2 ,N o .l,p p : 65-72.
b. “A Review o f key publications on Benchmarking: Part 11”., Mohamed Zairi, and
M ohamed A.Youssef, 1996, Benchmarking for Quality Management and Technology
Vol.3, N o .l, pp: 45-49.
3) “Benchmarking: A Select Bibliography” ., S.N.Vig, 1995, Productivity.Vol.36, No.3,
October-December.
4) “A review o f benchmarking literature”, Czuchry, A.J., Yasin, M.M., and Darsch, J.J.,
1995, International Journal o f Product Technology, V ol.10., N os.1/2, pp: 27-45.
5) “A framework for benchmarking in the public sector Literature review and directions for
future research”., Jeffrey J.Dorsch and Mahmoud M. Yasin, 1998, International Journal
o f Public Sector Management., V ol.l 1, No.2/3, pp: 91-115.
6) “Theory and practice o f benchmarking: then and now”., Mahmoud M. Yasin, 2002,
Benclimarking: An International Journal., Vol. 9, No.3., pp: 243.
Out o f the six publications cited here, the fourth one namely ‘A review o f benchmarking
literature’, by Czuchry, et.al. (1995) was not available to the authors at the time o f literature
survey and hence the authors could not use the valuable information o f this publication for a
comparative study.
Further, a comparison among the earlier attempts to review literature on benchmarking is made
using certain attributes. Outcome o f the different reviews are shown in Table - 2.3.
The attributes considered for comparisons are:
• Focus and Objectives: This refers to a brief coverage o f the publications in terms o f the content and the applicability.
• N um ber and Type o f Publications covered: The number o f publications listed and whether they are Text Books, Journal Papers, Conference Proceedings or Periodicals.
• Review methodology: It looks at the way in which the literature has been reviewed and classified.
27
W)a
«S
JSuC
CQao
ta
au324>
sn3o
'>ft
Ph
IKtBSs
C/3
rn(S
3c«
H
fN
^■§Ci,
V+-sJO • p
m
0 .51 ^
l l■§ §
^ -Cl
ouo3
c/0
~aS P> S
. 2> i -
(D C/5S g ^-a .2 p k. C3 +-» M5 vh o cd
< (U (U <D .ti ^ ^>-4 ^ v-i
^ ■
^ 12 ax) od 3(U :t=
PQ CQ
bO>'Zc/i
(UM<+-,O
<D
bJ)ClW -H
C -S.2 ^c3 C . . • •
> o ^ ^ a(U -::3 o '^ ■ § I i S< a,CQ Dh o-i
ISo g 'o -aG h c3 W cB ^
ChO (Ueci cEi
_o-4—»H
V c/3VI
.. o ■ s ^CQ jN <3-ct t 3 (U w
x; X!
ooONON
IT)ONOn
UX)ot jO
c <3n r<-)
l 4 i§ ^ a2 o u £ > Q
s oONON
IT)ONON
U4
<
(N
OnOn
g i cu) 5p
cS
•l
lO. Os
oc a
NO
_ § "o -{
£ H CN C3
<M
>n aNO
CJ a>
tj) 5p bo^■S § -2 .^ S Q '- ;^ ^ ^
c, o
"S '■§ . 2
^ 3>" CL,
'o>
r>. . ocH-H ;z;T3 H i>(U —1 bOJS cd c3C/1•f“H g CL,
3 13O 6a , >—>
oo(N
O Dc ■>
+-*o o
sa-♦-*
13 H(U 60o G •
3§3(/j
(U »n Ph o\Q-ON c3KS 1-H
coUWDC■•g«a>ewB(U
fO
c/2
1 °l • S d -
(50;O
!/l
■■scbb G
1Xu
c3(U>%(U
2 sDh (U^ j:300 U
p i 3 ^T3 OS 73
03 .i:3Wao
(Ut3<y>252w
fS
3,o'>O)
CQas3tn
ONrN
O <U O -O
S -2 S§ . |^ O ;3 (u
fiH olo
a0 UWDC1 s
JSua0>nsotn
tsc/50>lu92V
«s
<«3©
' iu
«BBs
c/3<
.2W) o ’ >c
' $D
j : :
•4-( D
•—1> >
c / 3o
s(Uo
•+3Hbbc
*3O-4—>
1c,o
-♦-Jc/i
2eu 1
c0)e a a
VIo
0 0 § uao toCO g
u■>
( UCQ
op
e1>oo(U
pti oJO <
<uCQ s 3
C / 3 s
<L)>< Ibb-o :se 3 « &fi N
I<u-4-t9
.£3
§
KaI■K*-O'o
(N
X(L>H
S2
COO O
D CQ
OiVOOs
U5Oo
CQ+-*X
8t/3 <L> Oaa
^I sC c/3^ S3 ^
-o m .2
o c<u OQr- S VO
VO
or n
cSi - t0
1
(Uo x:
-♦-Jt+-l
c/5
cso 2•4—>
CT) c3 * sOg
Jts4J
oG0>
co
2a<4-1o
d> u
T3
eoUM)B2)U«S
S iua0)ncov>
tS
1Co>!m3-t-*R
ra fli
& iX
<D WH .S
II■> o 2 "3c^.ac/3 2
1 - 3
C/51-H"S
a1)o
o S2
^ , o ^•tS ^ 00<u
H s 3
00C
c/5
'oI °!=! fa <u o 2 I
g tS s77 <U
<Uc/5
c/5■ ^ 1 c BO O OJ
rs
«'>2ilU’(/2c
(L)(U X
-C o«!so‘>
Ph
C4Sssc«
ooJ^<o
sO t3 O ^s ^
^ "o o ^
I g"H ^ '-S
o I^ • rC•r Oi o0 « g
2 : ^ 0
1 S ' ! ' ?^ S i
s ^ S -o § 5 3 &CO J:5
2 XS ‘B ^ § ;t3 B
^ s■g ° c<u « r j
- S I I^ C3 Cao « Ph oG tn c/2 - 3^ f t H ^ t3 ZI U ^ >
' I S I Uc s CZ) J D S IX , O
< (u on
I t/2 '■3 o g■“ -S
(JhO o^ 5 .<U 13
•S;S oD PL,' 3 i/3 1 -^ I-Mrrt fl «—!
2 S<U 13 < <
<D^ 1(U
OT3
SUS•n
(=0_o"oXJ
(Us
cl,o'(/I_2cou
00
Apart from these distinguishing attributes, certain common parameters like, the Name o f
PubHcation, Author(s), Year o f publication. Journal o f publication are also used.
2.5.2, Preamble to Literature review
There is a proliferation o f literature on the topic o f benchmarking in the last 15 years,
as revealed in this literature review. Considering the gamut o f publications it can be said that
the benchmarking technique has seen a steady growth and appears to be heading towards
maturity level.
As a part o f the research it was decided to classify and analyze the literature in detail. The
course o f action included the following steps:
■ Updating the database to ensure that literature is as current as possible. The collection o f
literature has been reviewed till June 2002.
" For literature search, both hardcopy search in established libraries in India and electronic
search in World Wide Web were made. The well-known search engines available at
w w w .g o to .co m ,www.altavista.com and www.google.com were specifically used to
ferret the literature pertaining to benchmarking from a wide variety o f sources on the
internet. An honest attempt has been made to include as many publications as possible,
without claiming that the listing is complete or exhaustive in nature.
" Developing a classification scheme was the next step. First a bibliographical list o f all
publications was developed and a file was created in Excel spreadsheet.
" The review process in a different way and is illustrated in the subsequent sections.
2.5.3. M ethodology and Scheme of Review
The classification scheme proposed includes a simultaneous parallel categorization that
highlights the growth o f literature from time to time and also the coverage o f benchmarking
specific to different groups like;
1. Benchmarking: General aspects or Fundamentals
All publications under this category deal with very general and fundamental concepts of
benchmarking, essentially for first time readers. Fundamentals are usually covered to a large
extent particularly when the discipline is in the introduction and growth stage. This can be
32
confirmed by the number o f publications, which appeared in the early time period o f the time
scale considered.
2. Benchmarking - Specific Applications and Case Studies
People are more interested to know about applications and success stories. Therefore this
should be a useful group. Under this categorisation, all literature dealing with applications
specific to manufacturing and non-manufacturing sectors are shown.
3. Benclimarking - Innovations / Extensions / New Approaches
When the technique reaches a saturation stage in terms o f its popularity, novel approaches
and innovations start appearing in the literature. This category is considered to recognise and
appreciate the novel approaches or paradigm shifts in benchmarking techniques or its
applications.
4. Benchmarking - Applicable to education sector
This categoiy is specially included here for the benefit o f academicians and also forms a
major aspect o f the present research.
It is understandable that a very strict demarcation in the categorisation is not possible
since there may be certain overlaps in the publications analysed.
A Pareto diagram o f the number o f publications in different categories is given in Figure -
2 . 1.
120<0c 100_ora 80
n 60 --3Q. 40 --5? 20
0 -
I Percent■ Cumilative Percent
Categ Categ Categ Category-1 ory-2 ory-3 ory-4
Publication Categories
Legend:Category-1 Benchmarking: General/Fundamentals/Models Category-2 -> Benchmarking: Specific Applications / Case Studies Category-3 -> Benchmarking - innovations and Extensions / New Approaches Category-4 -> Benchmarking - EducationFigure - 2.1. A Pareto diagram of the number o f publications in different categories
33
All the publications in the categories described earlier have further been coded based on the
chronological appearance o f the article, for the convenience o f the readers. The first code in
the form a number from 1 to 4, refers to the categories 1 to 4 illustrated above. Coding has
been done from 1980 onwards, since the concept o f benchmarking emerged during the
1980s. Also, the time interval for the first category is taken as 10 years.
This is adopted, since the number o f publications during the first ten years are not many.
Publications after 1990 have been categorised on a time interval o f two years. Thus, the time
periods are represented as “a” (ten years: January, 1980 - December, 1989), “b” to ‘h” (two
years each; January, 1990 to January, 2002). This time based coding is displayed in Table -
2.4.
Table - 2.4. The coding pattern for classification based on time of publication
TIME FRAME
January January January January January January January January1980 1990 1992 1994 1996 1998 2000 2002
. - - - - - - Onwards
Dec. Dec. Dec. Dec. Dec. Dec. Dec.1989 1991 1993 1995 1997 1999 2001
Category CO DEa b c d e f g h
1 1 - a 1 - b 1 - c 1 -d 1 - e 1 - f 1 -g 1 - h2 2 - a 2 - b 2 - c 2 - d 2 - e 2 - f 2 - g 2 - h3 3 - a 3 - b 3 - c 3 - d 3 - e 3 - f 3 - g 3 - h4 4 - a 4 - b 4 - c 4 - d 4 - e 4 - f 4 - g 4 - h
As an example, the article, ‘Measuring the Unmeasurable’ by Brisley (1983) is coded under
1- a. This means the publication was made during January 1980-December 1989 and it deals
with Category - 1, namely “Fundamentals o f Benchmarking”. Similarly, a publication coded
under 4 - c means the publication came out during January 1992-December 1993 and is
related to Category - 4, “Benchmarking Education Sector” .
Similarly, all the publications, based on this coding pattern, are identified in Table - 2.5, by
their serial number as given in the bibliographical list.
34
Table -2 .5 . Categorisation of all publications
Category -1 Benchmarking: General/Fundamentals/ModelsCODE ORDER IN THE BIBLIOGRAPHICAL INDEX
1 - a Brisley (1983), Camp (1989a, b, c, d, e) Fuld (1989), Furey (1987), Guilmetle and Carlene (1984), Johne and Snelson (1988), Pryor (1989), Tucker et al. (1987)
1 - b Benson (1991), Biesada (1991), Bowers (1991), Camp (1990), Davis (1990), Dickey (1991), Faidley and M usser (1991), Geber (1990), Linsenmeyer (1991), Martin (1991), Maturi (1990), Meyer (1991), Tyndall (1990), W alleck et al. (1991), W elleck et al. { \9 9 \) , Whiting (1991)
1-c Altany (1992), Atherton (1993), Biesada (1992), Bogan and English (1993), Bookhart (1992), Brown (1992), Bruder (1992), Camp (1992, 1993), Chappie (1992), Chung (1993a, b). Dale (1992), Day (1992), Enslow (1992), Ettorre (1993), Fink (1993), Fitz-Enz (1992a, b, 1993), Flower (1993), Forger (1992), Foster(1992), Gardner (1992), Hall (1992), Haserot (1993), Henricks (1993), Hequet(1993) Hiebler (1993), Hogg and Hogg (1993), HRFocus (1993), Hunter and Shearman (1992), Istvan (1992), Jennings and Westfall (1992), Julien (1993), Kharbanda (1993), Kimmerling (1993), King (1993), Kobe (1993), Lenckus (1993b), Main (1992), McGonagle and Fleming (1993), Micklewright (1993), Miller (1992b), Mittelstaedt (1992), M onczka and Morgan (1993), Nandi (1993), Newman(1992), Ogilvie (1993), Overman (1993), Pansley (1993), Payne and Blackboum(1993), Port and Smith (1992), Prestly (1993), Pryor and Katz (1993), Ransley (1993), Richardson (1992), Ryan (1993), Sasenick (1993), Sharman (1992a), Sheridan (1993a, b), Shetty (1993), Sillyman (1992), Singleton-Green (1992a, b), Soderberg and O ’Halloran (1992), Spendolini (1992), Sprow (1993), St Clair (1993), Stratton (1993), Tuttle (1993), Vaziri (1992, 1993), Venetucci (1992), Weatherly (1992), Weimer (1992), Weisendanger (1992, 1993)
]-d Anderson (1994a), Anderson and Pettersen (1994), Anderson and Camp (1995), Burgess (1995), Carris and Bartlett (1994), Czuchry et al. (1995), Fleisher and Burton (1995), Goldwasser (1995), Grayson (1994), Hollstein (1995), Jackson et al. (1994), Kinni (1994a, b), Lema and Price (1995), Longowitz and Rao (1995), Malec (1994), M oad (1994), Ottenliouse (1994), Pulat (1994a, b). Purchasing (1994), Rigby (1995), Tutcher (1994), Vig (1995), Zairi and Youssef (1995 a, c)
] -e Balm (1996), Bassi and Cheney (1997), Colding (1997), Dhawan (1996), Elmuti et al. (1997), Elmuti (1998), Fowler (1997), Harrington (1997), Lincoln and Price (1996), Malcolm (1997), Morgan (1996), Powers (1996/1997), Rogers (1997), Schumann (1996), Shen-Then (1996), Simmons (1996), Singh (1997), Smith (1997), Thompson and Cox (1997), Zairi and Ahmed (1996)
1-f Ammons (1999), Bhutta Khurrum and Huq (1999), Dorsch and Yasin (1998), Fetter (1998), Hillier et al. (1998), Holloway et al. 09 9 8 ), McGonagle and Fleming (1998), W ah-Fond et al. (1998), Zoins (1998)
1-g Battaglia and Musar (2000), Dervitsiotis (2000), Longbottom (2000), Per and Hollensen (2001), Prado and Prado (2001)
1-h Carpinetti and De Melo (2002), Strategic Direction (2002), Yasin (2002)
35
Categorisation o f ail publications [Contd.
Category 2 Benchmarking: Specific applications/case studies2-a Cavento (1988), Drozdowski (1983), Fifer (1989), Lowis and Albert (1985),
Subramanian (1984)2-b Bemowski (1991), Eccles (1991), Press (1991), Quality and Productivity
Management A ssociation (1991)2-c Allan (1993), Azzolini and Shillaber (1993), Bean and Gros (1992), Bracken
(1992), Bredin (1993), Brown (1992), Cecil and Ferraro (1992), Crow and Van Epps (1992), Chung (1993c), Crespy et al. (1993), Davis and Patrick (1993), Ford (1993), Gable et al. (1993), Gamble (1993), G off (1993), Harari (1993), Inger (1993), Johnson (1992), Karch (1992), Krause and Liu (1993), Lenckus (1993a), Markin (1992), McGaughey (1993), M iller (1992b), Owen (1992), Prairie (1993), Richman and Koontz (1993), Roth (1992), Schefczyk (1993), Schmidt (1992), Sharman (1992b), Shaughnessy (1993), Spitzer (1993), Verschoor (1993), Walsh (1992), W atson (1993), Wendel (1993), Zairi (1992)
2-d Adam and Vandewater (1995), Anderson (1994b), Baker (1994), Bell and Morey (1994), Bhat (1995), Bowman and Faulkner (1994), Bruder and Gray (1994), Chao(1994), Chen (1994), Clayton and Luchs (1994), Cooper and Kleinschmidt (1995), Delbridge et al. (1995), Holt (1994), Lee and Howard (1994), Lorence (1994), Maheshwari and Zhao (1994), Matzko and Wingfield (1995), Morey and Dittman(1995), Obinata (1994), Oliver and McDonald (1995), Petrick et al. (1994), Poirier (1994), Sinclair and Zairi (1995), Sohal and Lu (1995), Sweeney (1994), Voss et al. (1994), Wallace (1995), Zairi and Y oussef (1995 b), Zhao et al. (1995)
2-e Bergstrom (1996), Buscaglia (1997), Chapman and Hyland (1997), Clarke and Manton (1997), Edgett and Snow (1996), Epperheimer (1997), Evans and Dale (1997), Floch et al. (1997), Frederickson (1996), Fuller (1997), Goodman et al. (1996), Hamilton and Gibson (1996), Hiltrop and Despris (1997), Johnston and Kirch (1996), Keehley and Mac-Bride (1997), Lagoe and Aspling (1997), Le Sueur and Dale (1997), Millen et al. (1997), Min and Min (1996), M in and M in (1997), Nacker (1997), Ogava and Ketner (1997), Prior-Smith and Perrin (1996), Ramabadron et al. (1997), Relihan (1997), Roche (1997), Schioeder (1996), Voss and Blackmon (1997), Yasin and Zimmer (1996)
2-f Ahmed and Rafiq (1998), Ahmed and Zairi (1999), Badrinath et al. (1998), Beaumont and Sohal (1999), Beretta and Dossi (1998), Blinn (1998), Burgess(1998), Buyukozkan and Marie (1998), Coe (1999), Colding (1998), Corbett (1998), Davis (1998), Elmuti and Kathawala (1997), Gilmour (1999), Glass (1998), Hsien- Chen (1998), Jane-Davies and Kumar-Kochhar (1999), Jones (1999), Lagoe et al.(1999), Mann et al. (1998), Mann (1998), Mentzer et al. (1999), Parker (1998), Pfohl and Ester (1999), Simpson et al. (1999), Sohal et al. (1999), Tang and Zairi (1998a, b, c), Treadwell (1998), Whymark (1998), Zairi (1998a, b), Zairi and Ahmed (1999)
36
Categorisation o f all publications [Contd..]
Category 2 Benchmarking: Specific applications/case studies [Contd.. ]2-g Brah et al. (2000), Chung-W oon (2000), Chung-W oon (2001), Darmont and
Schmeider (2000), Handerson and Evans (2000), Johnson and Chambers (2000a, b), Kumar and Chandra (2001), Lagoe et al. (2000), Morling and Tanner (2000), Muthu et al. (2000), Nath and Mrinalini (2000), Robson and Prabhu (2001), Rodwell et al. (2000), Sarkis (2001), Shen et al. (2000), Simpson and Kondouli (2000), Ulusoy and Ikiz (2001), Zairi and Whymark (2000a, b)_______________________________________
2-h Davis and Kochhar (2002), Hyland and Beckett (2002), McAdam and Kelly (2002), Mukherhee et al. (2002), Underdown and Talluri (2002)
Category 3 -^Benchmarking: innovations and extensions/new approaches3-a Lewis et al. (1985)3-b3-c Crespy and Becker (1993), Harkleroad (1992), McGonagle (1992)3-d Elnathan and Kim (1995), Guimaraes and Langley (1994), Hutton and Zairi (1994),
Lu et al. (1994), Lucertini et al. (1995), Monkhouse (1995), Partovi (1994), Webster and Lu(1995)_________________________________________________________________
3-e Behra and Lemmink Jos (1997), Hiebeler (1997), Yun (1997)3-f Anderson and Moen (1999), Bhattacharjee (1999), Kumar et al. (1999), Madu and
Hua (1998), McNamee and Greenan (1999), O ’Dell et al. (1999)___________________3-g Featherman (2000), Fuller (2000), Razmi et al. (2000), Talluri and Sarkis (2001)
Jeffcoate et al. (2002), Sharif (2002)_________________________________________3-h
Category 4 -> Benchmarking: Education4-a -
4-b -
4-c Shafer and Coate (1992)4-d Brennan (1995), Houshmand et al. (1995), Williams (1995)4-e Dittenhofer et al. (1996), Fredenberger et al. (1996), King (1996), Parisean (1997),
W eeler(1996)4-f D ’Mello (1999), Epper (1999), Godfrey and Godfrey (1999), Howe and Martin
(1998), Lomas (1999), Payne and Whitfield (1999), Raghunath (1998),4-g Fiekers et al. (2000), Jackson (2001), Wan Endut et al. (2000)4-h Laughame (2002), Shaw and Green (2002)
2.5.4. Observations and Comments
In this review, 384 publications in total are analysed for the purpose o f providing
insights to the growth and development o f benchmarking concept. These publications
include specific papers in national/international journals, and conferences. Other articles
such as exclusive reports in newsmagazines, newsletters, special columns and editorials are
left out as the authors feel that they deal with general information in a limited mamier.
37
Similarly books written on benchmarking are also omitted from the review. Further, 170
publications belong to general aspects or fundamentals o f benchmarking, 166 papers pertain
to specific applications/case studies in benchmarking, 27 publications come under
innovations/extensions/new approaches in benchmarking and finally, 21 publications fall
under the category o f benchmarking applicable to education sector.
As seen in Figure-2.1., almost half o f the publications speak about the general aspects o f
benclimarking. Often it is mentioned in literature that the benchmarking concepts were
initiated during 1989, after Xerox publicized it. At this point, it is worthwhile to note that
attempts to use this concept were made first, in the year 1983-1984 as indicated by Brisley,
(1983). In terms o f its application in the industry, Guilmetle and Carlene (1984), explore the
utility o f benchmarking in employee training whereas Lowis, et. Al. (1985), illustrate this
concept as a viable tool for computer performance evaluation during the year 1985. It is also
interesting to note that, as publicized by Subramanian (1984) certain interfirm comparisons
were made in the Asian region as early as in the year 1984.
Regarding the application o f benchmarking concepts to industry and service sectors,
published literature started appearing in a noticeable way only after the 1980’s.
The contributions in the form o f technical papers on general aspects o f benchmarking are
maximum in number during the period 1992 - 95. This is probably due to the initial
curiosity and interest generated on the topic. Thereafter there has been a decline, as seen in
the chronological listing o f publications number-wise in the line graph in Figure - 2.2.
In the sample o f literature collected it is seen that there are 166 papers, specific to the
category “Benchmarking - Specific application / Case studies” . Regarding Case Studies
group, it is observed that one o f the first applications, namely benchmarking o f purchasing
activities was done in the year 1983 as reported by Drozdowski, (1983). Subsequently many
case studies have been conducted in the manufacturing sector and also in the service sector.
Even here, the number o f publications during 1993 -9 9 are maximum and there after there is
a decline.
38
Figure. 2.2. Graph Showing Chronological Appearance o f all publications
This suggests that the concept has been applied successfully to almost all functional areas.
Table - 2.6, shows the application o f benchmarking to different functional areas.
Table - 2.6. Different functional areas covered by various authors
Specific Areas o f Application of Benchmarking
Order in the Bibliographical Index
Accounting Processes Beretta and Dossi (1998), Sharnian (1992b), Verschoor (1993)
Banks Mukherjee et al. (2002), Wendel (1993)Benchmarking Operations Bredin (1993), Cecil and Ferraro (1992)Business re-engineering Adam and Vandewater (1995), Rishman and
Koontz (1993), Simpson et al. (1999)Career M anagement Epperheimer (1997)Change Management Clarke and Manton (1997)
39
Specific Areas o f Application of Benchmarking
Order in the Bibliographical Index
Core Competencies Per and Hollensen (2001)Credit Function Chung (1993c), Gamble (1993)Education Dittenhofer et al. (1996), D ’Mello (1999),
Epper (1999), Godfrey and Godfrey (1999), Howe and Martin (1998), Lomas (1999), Laughame (2002), Payne and Whitfield (1999), Raghunath (1998)
Employee Attitudes Bracken (1992)Environment Bhat(1995), K arch(l992)Facility M anagement Johnson (1992)Finance Schmidt (1992), Spitzer (1993), Whymark
(1998)Food and Drinks Industry Mann (1998)Health and Safety Management Fuller (1997), Inger (1993), Lorence (1994)Hotel Services Min and Min (1996, 1997), Morey and
Dittman (1995)Human Resources Ford (1993), Hiltrop and Despris (1997), Holt
(1994), Parker (1998), Prior-Smith and Perrin (1996), Rodwell et al. (2000)
Information Technology Allan (1993), G off (1993), Lowis and Albert (1985), Quality and Productivity Management Association (1991)
Law Courts Buscaglia (1997)Library Shaughnessy (1993)Logistics Cavento (1988)Manufacturing Sarkis (2001), Sweeney (1994), Voss et al.
(1994)Marketing Gable et al. (1993)Operational Performance Voss and Blackmon (1997)Performance M easurement Eccles(1991), M iller (1992b)Physician Workforce Floch et al. (1997), Goodman et al. (1996),
Schroeder(1996)Pre-project Planning Hamilton and Gibson (1996)Preventive Maintenance Practices Chen (1994), Muthu et al. (2000)Product Development Ogava and Ketner (1997)Public Sector Bruder and Gray (1994), Coe (1999), Davis
(1998), Frederickson (1996)Purchasing Drozdowski (1983)Research and Development Bean and Gros (1992), K iause and Liu (1993),
Nath and Mrinalini (2000), Press (1991)Retail Distribution Strategy Matzko and Wingfield (1995)
40
Different functional areas covered by various authors (C ontd ..]:Specific Areas o f Application of
BenchmarkingOrder in the Bibliographical Index
Risk Management Blinn (1998), Lenckus (1993b)Sales Performance Mann et al. (1998)Safety M anagement Relihan(1997)Sales Forecasting M entzer et al. (1999)Small and M edium Industries Badrinath et al. (1998), McAdam and Kelly
(2002)Spare Parts Logistics Le Sueur and Dale (1997), Pfohl and Ester
(1999)Supply Chain Operations Ahmed and Zairi (1999), Gilmour (1999)T elecommunications N acker(1997)Travel Management Bell and Morey (1994)Treasury Treadwell (1998), Wallace (1995)World Class Manufacturing Owen (1992)
It can be seen in Figure - 2.2 that under the category o f “Benchmarking Innovations and
New Approaches” , the number o f publications increased from 4 in 1990-91 to 38 in 1992-93.
However, 1999 onwards there appears to be a drop in the number o f publications.
Here, the paper by O ’Dell, et.al. (1999) is worth mentioning since the paper details
the applicability o f benchmarking in analysing how organisations seek to incorporate various
knowledge management approaches into their business. Also, the paper by Guimaraes, et. al.
(1994) speaks about the relationship between overall company innovativeness and company
performance. They also point out that benclimarking innovation involves developing a plan,
which include dimensions o f innovation success: seeking, evaluating, using and fostering
innovation.
Another new approach to benchmarking has been highlighted by Fuller, (2000), where the
use o f benefit curves for benchmarking processes has been extensively discussed. Similarly,
the paper by Featherman, (2000) uses uncertainty modeling as a component o f
benclimarking, which is a new approach towards benchmarking.
Among the 8 papers reviewed under the "Benchmarking-New Approaches" category, it is
worthwhile to mention the coverage o f two papers. First one by McNamee, et.al.{\999)
reports about the Competitive Analysis Model, a new approach to strategic benchmarking o f
small firms. The second one by Talluri, et.al., (2001) describes some geometrical equations
that will help analyse benchmarking data.
41
Finally, in the category dealing with “Benchmarking in Education”, 21 papers have been
reviewed. These papers deal with benchmarking o f management education, engineering
education, schools and student relations.
2.5.5. Critical View on Review o f Literature
A scrutiny o f the publications show that several aspects o f benchmarking along with
many interesting and diversified applications, have been covered in sufficient detail. These
publications can serve a great deal towards quality improvement. Thus academicians,
practitioners and researchers have a good number o f sources in the form o f more than 300
articles to study, discuss and debate over many aspects o f benchmarking.
The present review o f literature on benchmarking, carried out as a part o f on-going research,
has identified certain issues which have not been satisfactorily addressed or not been
addressed at all. These issues can be regarded as inadequacies and they offer scope for
further research and exploration. The issues identified are as follows:
a. Cost aspects o f benclimarking
The overall cost incurred in carrying out a benchmarking exercise needs to be established,
say in temis o f cost models or cost equations. This would enable the decision-makers to
decide upon financial commitment before embarking on the benclimarking exercise.
Further it would allow to estimate the return on investment, and to convince the top
management. While a precise model is difficult, because o f variability o f factors involved,
an approximate method would be quite useful.
b. Duration o f benchmarking exercise
Guidelines regarding setting up o f a timeframe for conducting benchmarking are not
available. If a method can be described to decide upon the total time involved in
benclmiarking exercise, it would prove very helpful in setting targets and deadlines.
42
c. Human Resources in benchmarking activities
Rationale behind formation o f cross-functional benchmarking teams, identification o f tasks
o f benchmarking teams, and responsibility sharing among benchmarking teams, have not
been discussed in sufficient detail. The human role in benchmarking activities needs to be
clarified in complete depth to ensure better teamwork in a benchmarking project.
d. Selecting benchmarking partner
Selection o f partner or superior performer, their duties and responsibilities, legal and business
aspects are to be further elaborated.
Sometimes, the superior performer as recognised in terms o f market leadership or
achievements/success rate, may not be willing to disclose the business practices. This could
be a major deterrent in the benchmarking process. Further best practices followed in a
certain successful organisation may not necessarily be the best when adopted by other
organisations. Eventually, success rate may also significantly differ across organisations.
43
References - Exclusive to literature survey(Not a part o f main references which appear at the end)
1. Adam. P., and Vandewater., (1995), “Benchmarking and the bottomline: translating business re engineering into bottomline results”, Industrial Engineering, Vol.27., No.2., pp. 24-6.
2. Ahmed, P.K., and Rafiq, M., (1998), “Integrated benchmarking: a holistic examination o f select techniques for benchmarking analysis”. Benchmarking fo r Quality Management and Technology, V ol.5 .,N o ,3 ., pp. 225-242.
3. Ahmed, P.K., and Zairi, M., (1999), “Supply chain partnerships - Theory and example o f best practice”, Benchmarking: an International Journal, Vol.6., No. 1., pp. 78-95.
4. Allan, F.C., (1993), “Benchmarking: practical aspects for information professionals”. Special Libraries, V ol.84., No.3., pp. 123-30.
5. Altany, D., (1992), “Benchmarkers Unite”, Industiy week, February, 3, pp. 25.6. Ammons, D., (1999), “A proper mentality for benchmarking”. Public Administration Review, Vol.59,
No.2, pp. 105(1).7. Anderson, B., (1994), “A benchmarking process model - The benchmarking wheel”. Proceedings from
the 10th International conference o f the Israel society fo r quality Jerusalem, Israel.8. Anderson, B., (1994), “Benchmarking in Norweigian industry and nationship benchmarking”,
Proceedings from IFIPWG5. Workshop. Benchmarking -Theory and practice, Norway.9. Anderson, B., and Pettersen, P.G., (1994), "The basis o f Benchmarking - What, how, when and why?"
Proceedings o f the Pacific Conference on manufacturing, Jakarta, Indonesia10. Anderson, B., and Camp, R.C., (1995), “Current and Future Development o f Benchmarking”, The
TQM M agazine, V o l.l ., No.5., pp. 21-25.11. Anderson, B., and Moen, R.M .,(1999), “Integrating benchmarking and poor quality cost measurement
for assisting the quality management work”. Benchmarking: an International Journal, Vol.6., No.4., pp. 291-301.
12. Atherton, M., (1993), “Strategy implementation; closing the management gap”. Industrial Management, SepI Oct, pp. 1-2.
13. Azzolini, M., and Shillaber, J., (1993), “Internal service quality: winning from the inside out”. Quality Progress, November, pp. 75-78.
14. Badrinath, R., Mahesh, K., Larre, O.H., Khari, M., and Williams, C., (1998), “Benchmarking for small enterprises: the international competitive gauge” International Trade Forum, N o.2., pp. 14-19.
15. Baker, W.H. Jr., (1994), “In pursuit o f benchmarking excellence; the Texas Instruments Story”, National Productivity Review, Vol. 14., N o .l , pp. 63-72.
16. Balm, G.J., (1996), “Benchmarking and Gap analysis: what is the next milestone?” Benchmarking fo r Quality Management and Technology, V ol.3., N o.4., pp. 28-33.
17. Bassi, L.J,. and Cheney, S., (1997), “Benchmarking the best”, Training and Development, November, pp. 60-64.
18. Battaglia, J. Jr., and Musar, R., (2000), “Picking the right benchmark”. Journal o f Accountancy. Vol. 190, No.2, pp. 63.
19. Bean, T.J., and Gros, J.G., (1992), “R & D Benchmarking at AT and T” Research-Technology> Management, Vol.35., N o.4, pp. 32-37.
20. Beaumont, N., and Sohal, A., (1999), “Quality management in Australian service industries” Benchmarking: an InternationalJournal, Vol.6., No.2, pp. 107-124.
21. Behra, R., and Lemmink, Jos, G.A.M., (1997), “Benchmarking field services using Zero defects approach”. International Journal o f Quality and reliability management. V ol.14., N o.5, pp. 512-526.
22. Bell, R.A., and Morey, R.C., (1994), “The search for appropriate partners: a macro approach andapplication to corporate travel management”. Omega, Vol.22., N o.5, pp. 477-490.
23. Bemowski, K., (1991), “The Benchmarking bandwagon” Quality Progress, Vol. 24., N o .l , pp. 19-24.24. Benson, T., (1991), “Challenging Global myths” Industry week, October, 7, pp. 13-25.25. Beretta, S., and Dossi, A., (1998), “Methodological strategies for benchmarking accounting
processes”. Benchmarking fo r Quality Management and Technology, Vol.5., N o.3, pp. 165-183.26. Bergstrom, Robin - Yale., (1996), “Benchmarking: how it is at Deere” Automotive Production,
September, pp. 63-65.
44
27. Bhat, V.N., (1995), “Benchmarking for environmental excellence” Industrial Management, Vol.37., N o .l,p p . 9-11.
28. Bhattacharjee, Pallavi., (1999), “Sharing Excellence”, Business World, July, pp. 56-57.29. Bhutta, Khurrum, S., and Huq, F., (1999), “Benchmarking - Best practices, an integrated approach",
Benchmarking: an International Journal, Vol.6., N o.3, pp. 254-26830. Biesada, A., (1991), “Benchmarking: as competition is heating up, so is the search for world class
performers”. Financial World, September, 17, pp. 28-3231. Biesada, A., (1992), “Strategic Benchmarking” Financial World, September, 29, pp. 30-3632. Blinn, James, D., (1998), “Benchmarking can help control o f risk” National Underwriter, October,
S24, 25, 3233. Bogan, C.E., and English, M.J., (1993), “Benchmarking; a wakeup call for board members (and CEOs
Too)”, Planning review, Vol.21., No.4, pp. 28-3334. Bookhart, S., (1992), “Benchmarking companies focus outward”. Industrial Engineering, February,
pp. 30-3135. Bowers, F., (1991), “Benchmarking against the best”. Proceedings o f the International Research
institute Conference on Benchmarking, May.36. Bowman, C. and Faulkner, D., (1994), “Measuring product advantage using competitive benchmarking
and customer perceptions”. Long Range Planning, Vol.27, No. 1, pp. 119-13237. Bracken, D., (1992), “Benchmarking employee attitudes”. Training and Development, June, pp.
49-5338. Brah, Shaukat, A., Ong, Ai-lin., and Rao, Madhu, B., (2000), “Understanding the benchmarking
process in Singapore”, Benchmarking: an InternationalJournal, Vol. 17., N o.3, pp. 259-27539. Bredin, A., (1993), “Benchmarking: Is it right for your operation?”. Computer World, Vol.27., No.40,
pp. 12340. Brennan, J., (1995), “Benchmarking an alternative to OFSTED - lessons for higher education”. Quality
Assurance in Education, Vol.3., N o .l, pp. 36-3841. Brisley, C., (1983), “Measuring the Unmeasurable” Fall Industrial' Engineering Conference
proceedings, pp. 22-2842. Brown, J., (1992), “Identifying and measuring customer focused performance measures” Proceedings
o f benchmarking and computer analysis in financial service, December, pp, 8.43. Brown, P., (1992), “Drawing a roadmap”, Financial World, September, 29, pp. 3844. Bruder, K. A., (1992), “International benchmarking”. Competitive Intelligence Review, Summer 1992,
pp.5-1145. Bruder, K.A., Jr., and Gray, E.M., (1994), “Public sector benchmarking: a practical approach” Public
Management, Vol.76, No.9, pp. S9-S1446. Burgess, K., (1995), “Prospering in a global economy”, Journal o f the operations Research Society,
V ol.46 ,N o .5 , pp. 553-56147. Burgess, T.F., (1998), “Competitive priorities, process innovations and time-based competition in the
manufacturing sectors o f industrialising economies” Benchmarking fo r Quality Management and Technology, Vol.5., No.4, pp. 304-316
48. Buscaglia, Edgardo., (1997), “Benchmarking procedural times; a quality control approach to court delays”. Benchmarking fo r Quality Management and Technology, Vol.4., No.2, pp. 84-95
49. Buyukozkan, Gulcin., and Marie, Jean-Luc., (1998), “Benchmarking process formulation and a case study”. Benchmarking fo r Quality Management and Technology, Vol.5., No.2, pp. 101-125
50. Camp, R.C., (1989), “Benchmarking: the search for best practices that lead to superior performance; Part - I”, Quality progress, January, pp. 61 -68
51. Camp, R.C., (1989), “Benchmarking: the search for best practices that lead to superior performance; Part - II, Quality Progress, February, pp. 70-75
52. Camp, R.C., (1989), “Benchmarking: the search for best practices that lead to superior performance; Part - HI”, Quality Progress, March, pp. 76-82
53. Camp, R.C., (1989), “Benchmarking: the search for best practices that lead to superior performance; Part - IV”, Quality Progress, April, pp. 62-69
54. Camp, R.C., (1989), “Benchmarking: the search for best practices that lead to superior perfromance; Part - V”, Quality Progress, May, 66-68
55. Camp, R.C., (1990), “Competitive benchmarking: Xerox's powerful quality tool”. Conference Board Research Report, 937, pp. 35-42
45
56. Camp, R.C., (1992), “Learning from the best leads to superior performance”, Journal o f Business Strategy, V o l.13., No.3, pp. 3-6
57. Camp, R.C., (1993), "A bible for benchmarking, by xerox". Financial Executive, V ol.9., N o.4, pp. 23- 27
58. Carpinetti, Luiz, C.R., and De Melo, Alexandre, M., (2002), “What to benchmark?; A systematic approach and cases”. Benchmarking: an International Journal, Vol. 9 No. 3, pp. 244 - 255
59. Carris, R., and Bartlett, B., (1994), “Benchmarking claims performance”. Risk Management, Vol.41., No. 12, pp. 30-38
60. Cavenato, J., (1988), “How to benchmark logistics operations”, Distribution, Vol.87., No.8, 93-96.61. Cecil, R., and Ferraro, R., (1992), “I Es fill facilitator role in benchmarking operations to improve
performance”. Industrial Engineering, April, pp. 30-3362. Chao, J.L., (1994), “Benchmarking Service laboratories”. Quality, Vol.33., N o.5, pp. 24-2763. Chapman, R.L., and Hyland, P.W., (1997), “Continuous improvement strategies across selected
Australian Manufacturing sectors”, Benchmarking fo r Quality Management and Technology, Vol.4., N o.3, pp. 175-188
64. Chappie, A., (1992), “Benchmarking pits industry against World's best in class”, Engineering Times, Vol. 14., N o.4, pp 1-6
65. Chen, F„ (1994), “Benchmarking preventive maintenance practices at Japanese Transplants”, International Journal o f Quality and reliability management, V o l.l., N o.6, pp. 19-26
66. Chung, R., (1993), “TQM: a commitment to corporate excellence”, Business Credit, March, pp. 18-1967. Chung, R., (1993b), “TQM: internal client satisfaction”. Business Credit, April, pp. 26-2868. Chung, R., (1993c), “TQM: benclimarking performance in credit fiinction”. Business Credit, May, pp.
19-21.69. Chung-Woon, Kin., (2000), “Assessment o f TQM implementation: Benchmarking Singapore's
productivity leaders”, Business Process Management Journal, Vol.6., No.4, pp. 314-33070. Chung-Woon, Kin., (2001), “Benchmarking Singapore's high - TQM maturity organisations”.
Benchmarking: an International Journal, V ol.8., N o .l, pp. 8-3471. Clarke, Angela and Manton, Stan., (1997), “A benchmarking tool for change management”. Business
Process Management Journal, Vol.3., No.3, pp. 248-25572. Clayton, T., and Luchs, B., (1994), “Strategic benchmarking at ICl fibers”, Long Range Planning,
Vol.27., No.3, pp. 54-6373. Coe, C., (1999), “Local government benchmarking: lessons from two major multigovemment efforts”.
Public Administration Review, V ol.59, N o.2, pp. 110 (1)74. Colding, B.S., (1997), “Dynamics o f best practice - a multi dimensional perspective”. Benchmarking
fo r Quality Management and Technology, Vol.4., N o.2, pp. 96-10375. Colding, B.S., (1998), “Benchgrafting: a model for successful implementation o f the conclusions o f
benchmarking studies”. Benchmarking fo r Quality Management and Technology, V ol.5., N o.3, pp. 158-164
76. Cooper, R.G., and Kleinschmidt, Elko, J., (1995), “Benchmarking Firms' New product performance and practices, EMR - Fall, pp. 112-120
77. Corbett, L.M., (1998), “Benchmarking Manufacturing Performance in Australia and Newzealand”, Benchmarking fo r Quality Management and Technology, Vol.5., No.4, pp. 271-282
78. Crespy, C., Miller, V., and Becker, T., (1993), “Export Benchmarking: export practices associated with superior performance”, Journal o f Business and Industrial Marketing, V ol.8., No. 1, pp. 36-44
79. Crespy, C.M.V. and Becker, T., (1993), “Export benchmarking: export practices associated with superior performance”, Journal o f Business & Industrial Marketing, V ol.8, No. 1, pp. 36-44
80. Crow, S.M. and Van, Epps, P.D., (1992), “An exercise in benchmarking”, HR Focus, V ol.69., N o.l 1, pp. 3-4
81. Czuchry, A.J., Yasin, M.M., and Darsch, J.J., (1995), “A review o f benchmarking literature”, International Journal o f Product Technology, Vol. 10., Nos. 1/2, pp. 27-45
82. Dale, B., (1992), “Code o f conduct’ helps to improve benchmarking visits”, Total Quality, May, 683. Dannont, J., and Schneider, M., (2000), “Benchmarking OODBs with a generic tool”. Journal o f
D atabase Management, Vol. 11, N o.3, pp. 1684. Davies, A.J. and Kochhar, Ashok, K., (2002), “Manufacturing best practice and perfonnance studies: a
critique”. International Journal o f Operations & Production Management, Vol. 22 No. 3, pp. 289 - 305
46
85. Davis, P., (1990), “Perspective Benchmarking”, Total Quality Management, December, pp. 309-31086. Davis, P., (1998), "The burgeoning o f benchmaricing in British local Government - The value o f
""Learning by looking"" in the public services". Benchmarking fo r quality management and technology. V ol.5., No.4, pp. 260-270
87. Davis, T.R.V., and Patrick, M.S., (1993), “Benchmarking at Sun Heath Alliance’, Planning Review, V o l.2 1 .,N o .l,p p .2 8 -3 1 ,5 6
88. Day, C., (1992^ “Benchmarking's first law: know thyself’, Industry week, February, 17, pp. 7089. Delbridge, R., Lowe, J., and Oliver, N., (1995), “The process o f benchmarking: a study from the
automotive industry”. International Journal o f Operations and Production Management, Vol. 15., No.4, pp. 50-62
90. Dervitsiotis, K., (2000), “Benchmarking and business paradigm shifts”. Total Quality Management, pp.S641
91. Dhawan, Radhika., (1996), “Benchmarking”, Business Today, July 7-21, pp. 92-10392. Dickey, J., (1991), “How Benchmarking contributes to total quality managemenf’. M aterial Handling
Engineering, November, 2693. Dittenhofer, M.A., Scheiner, J.H., and Gavin, T.A., (1996), “An examination o f internal auditing
programmes at lAA endorsed schools”. M anagerial Auditing Journal, V ol.l 1., No.5, pp. 14-2094. D'mello, Bernard., (1999), “Management Education - A critical appraisal”. Economic and Political
Weekly, November 27, pp. 111-12995. Dorsch, J.J., and Yasin, M.M., (1998), “A framework for benchmarking in the public sector- Literature
review and directions for future research”, International Journal o f Public Sector Management, Vol.l l . ,N o .2 /3 , pp. 91-115
96. Drozdowski, T.E., (1983), “GTE uses benchmarking to measure purchasing”, Purchasing, Vol.94., No.6, pp. 21-24
97. Eccles, R.G., (1991), “The performance measurement manifesto”, Harward Business Review, Jan-Feb, pp. 131-137
98. Edgett, S., and Snow, K., (1996), “Benchmarking measures o f customer satisfaction. Quality and performance o f new financial service products” Journal o f Services Marketing, V o l.10., N o.6, pp 6-17
99. Elmuti, D., and Kathawala, Y., (1997), “An overview o f the benchmarking process: A tool for continuous improvement and competitive advantage”, Benchmarking fo r Quality Management and Technology, Vol.4., No.4, pp. 229-243
100.Elmuti, D., Kathawala, Y., and Lloyed, S., (1997), “The Benchmarking Process; assessing its value and Limitations”, Industrial Management, July/August, pp. 12-19
101 .Elmuti, D., (1998), “The percieved impact o f the benchmarking process on organisational effectiveness”. Production and Inventory Management Journal, Third Quarter, pp 6-11
102.Elnathan, D., and Kim, O., (1995), “Partner selection and group fomiation in cooperative benchmarking”. Journal o f Accounting and Economics, Vol. 19., Nos. 2/3, pp. 345-364
103.Enslow, B., (1992), “The benchmarking bonanza”. Across the Board, April, pp. 16-22104.Epper, R., (1999), “Applying benchmarking to higher education: some lessons from experience”,
Change, V ol.31, N o.6, pp. 24105.Epperheimer, J., (1997), “Benchmarking Career Management”, HR Focus, pp 9-10106.Ettorre, B., (1993), “Benchmarking: the Next Generation”, Management Review, June, pp 10-16107. Evans, S., and Dale, B.G., (1997), “Benchmarking the engineer availability process - A case study”,
Benchmarking fo r Quality Management and Technology, Vol.4., N o .l , pp. 7-17lOS.Faidley, R.A., and Musser, S., (1991), “Benchmarking”, The Executive Educator, V o l.13., N o.9, pp.
46-47109.Featherman, D.W ., 2000, “Using influence diagrams as a benchmarking tool”, available at:
http://www.em.doe.gov/bch/feath.html110.Fetter, M., (1998), “Benchmarking - sharing our success and failure”, MedSurg Nursing, Vol.7, N o .l ,
pp. 6(2)111 .Fiekers, T., Dale, B.G., Littler, D.A., and Vob, W., (2000), “Benchmarking the postgraduate admission
process”. Quality Management Journal, Vol.7., N o.4, pp. 45-57112.Fifer, R.M., (1989), “Cost benchmarking functions in the value chain”. Planning Review, V o l.17.,
N o.3, pp. 18-27113.Fink, R., (1993), “Group Therapy”, Financial World, Vol.162., N o .l9 , pp. 42-48
47
1 M.Fitz - enz, J., (1992), “Benchmarking best practices”, Cannadian Business Review, V o l.19., N o.4, pp. 28-31
115.Fitz - enz, J., (1992), “Value added benchmarking: a tool for getting precisely what you want”. Employment Relations Today, Vol. 19., N o.3, pp. 259-264
116.Fitz - enz, J., (1993), “How to make benchmarking work for you?”, HR Magazine, Voi.38., N o .l2 , pp. 40-46
117.Fleisher, C.S., and Burton, S., (1995), “Taking stock o f corporate benchmarking practices: panacea or Pandora's box?”, Public Relations Review, Vol.21., N o .l, pp 1-20
llB .Floch, M., Sekscenski, E., Cultice, J., Plitzer, R., Hardwick, H., and Traxler, H., (1997), “Benchmarking the physician workforce”, JAMA, The Journal o f the American M edical Association, V ol.277, No. 12, pp. 964(3)
119.Flower, J., (1993), “Benchmarking Springboard or Buzzword”, Healthcare Forum Journal, Jan/Feb, pp.14-15
120.Ford, D.J., (1993), “Benchmarking HRD”, Training and Development, Vol.47., No.6, pp. 36-41121.Forger, G., (1992), “Where industry stands and where it is heading?”. Modern M aterial Handling,
September, pp. 48-52122.Foster, T.A., (1992), “Searching for the best”. Distribution, Vol.91., No.3, pp. 30-36123.Fowler, A., (1997), “How to use benchmarking?”, People Management, pp. 38-40124.Fredenberger, W.B., Marshall, L.L., and Ware, F.A, Jr., (1996), “Continuous improvement: a case
study in student relations”. Benchmarking fo r Quality Management and Technology, Vol.3., N o.2., pp. 21-31
125.Frederickson, H.G., (1996), “Comparing the reinventing Government movement with new public administration”. Public Administration Review, V ol.56., No.3, pp. 263-270
126.Fuld, L.M., (1989), “Taking the first steps on the path o f benchmarking”. Marketing News, September, 11, pp. 20
127.Fuller, C.W., (1997), “Key performance indicators for benchmarking health and safety management in intra and inter-company comparisons”. Benchmarking fo r Quality Management and Technology’, Vol.4„ No.3, pp. 166-174
128.Fuller, C.W., (2000), “Modeling continuous improvement and benchmarking process through the use o f cost benefit curves”. Benchmarking: an International Journal, Vol.7., N o .l , pp. 3 5 -5 1
129.Furey, T.R., (1987), “Benchmarking - The key to developing competitive advantage in mature markets”. Planning Review, Vol. 15., No.5, pp. 30-32
130.Gable, M., Fairhurst, A., and Dickinson, R., (1993), “The use o f benchmarking to enhance Marketing decision making. Journal o f consumer Marketing, Vol. 10., N o .l, pp. 52-60
131.Gamble, R., (1993), “Benchmarking Credit”, Corporate Cash Flow, May, pp. 32-33132.Gardner, E., (1992), “Putting guidelines into practice”. Modern Healthcare, September, 7, pp. 24-29133.Geber, B., (1990), “Benchmarking-Measuring yourself against the best”, Training, V ol.27, N o.l 1, pp.
38-42134.Gift, R.G., Stoddart., T.D., and Wilson., K.B., (1994)., “Collaborative benchmarking in a health Care
system.”. Healthcare Financial Management, Vol.48, No.9, pp: 80-88.135.Gift, R.G., Kinney., C.E., (1996), “Overcoming barriers to benchmarking in healthcare organisations”.
Best practice and benchmarking in healthcare, V o l.l, N o .l , pp: 3-9.136.Gilmour, P., (1999), “Benchmarking supply chain operations” Benchmarking fo r quality management
and technology. Vol.5., No.4, pp. 283-290137.Glass, P., (1998), “A benchmarking intervention into an executive team”, Total Quality Management,
Vol.9, N o.6, pp. 519138.Godfrey, J.M., and Godfrey, P.J., (1999), “Benchmarking Quality Management - How does it apply to
the University alumni office”. Benchmarking: an International Journal, Vol.6., No. 1, pp. 40-59139.Goff, L., (1993), “Benchmarking resources grow for IS managers”. Computer World, Vol.27., No.46,
pp. 136-141HO.Goldwasser., C., (1995), “Benchmarking: people make the process”. Management Review, V ol.84.,
N o.6, pp. 39-43141.Goodman, D., Fisher, E., Bubolz, T., Mohr, J., Poage, J., and Wennberg, J., (1996), “Benchmarking
the US physician workforce: an alternative to needs-based or demand-based planning”, JAMA, The Journal o f the American M edical Association, Vol.276, No. 18, pp. 11(7)
142.Grayson, C.J., Jr., (1994), “Back to the basics o f benchmarking”. Quality, Vol.33, N o.5, pp. 20-22
48
143.Guilmetle, H. and Carlene, R., (1984), “Competitive Benchmarking - a new concept for training Training and Development Journal, Vol.,38., No.2, pp. 70-71
144.Guimaraes, Tor., and Langley, Kathryn., (1994), “Developing innovation Benchmarks: an emperical study”, Benchmarking fo r quality management and technology, V o l.l., N o.3, pp 3-20
145.Hall, L., (1992), “Fundamental changes in Corporate restructuring” Industrial Engineering, September, 16.
146.Hamilton, M.R., and Gibson, G.E., Jr., (1996), “Benchmarking pre project planning effort”. Journal o f Management in Engineering, March/April, pp. 25-33
147.Handerson, K.M., and Evans, James, R., (2000), “Successful implementation o f Six Sigma: benchmarking in General Electric Company”, Benchmarking : an International Journal, V ol.7., No.4, pp. 260-281
148.Harari, O., (1993), “Internal customer R.I.P.”, Management Review, June, pp. 30-32149.Harkleroad, D.H., (1992), “Competitive Intelligence: a new benchmarking tool”. M anagement Review,
V ol.81.,N o.lO , pp. 26-28150.Harrington, J.H., (1997), “The fallacy o f Universal best practices”, TQM Magazine, Vol.9., N o .l , pp.
61-75151.Haserot, P.W., (1993), “Benchmarking: learning from the best”. The CPA Review, Vol.63., No. 10, pp.
81-83152.Henricks, M., (1993), “How do you measure up?”, Small Business Reports, Vol. 18., No.6, pp. 29-39153.Hequet, M., (1993), “The limits o f Benchmarking”, Training, V ol.30., No.2, pp. 36-41154.Hiebeler, R.J., (1997), “Benchmarking Knowledge” Executive Excellence, January, pp 11-12155.Hiebler, R., (1993), “A roadmap for success”. Industry Week, July, 19, pp. 53156.Hillier, J., Mackenzie, N., Matthews, J., and Mitchell C., (1998), “Does Benchmarking Work”, Supply
Management, May, 7, pp. 22-26157.Hiltrop, J.M., and Despris, C., (1997), “Benchmarking HR practices”, World Executives Digest, pp.
56-58158.Hogg, R., and Hogg, A., (1993), “A Quality journey; observations and suggestions regarding
continuous process improvement”. Total Quality Management, Vol.4., N o.2, pp. 195-214159.Holloway, J., Francis, G., Hinton, M., and Mayle, D., (1998), “Best practice benchmarking delivering
the goods?”. Total Quality Management, Vol.9, No.4-5, pp. S 121(5)160.Hollstein., B.R., (1995), “An outline for effective Benchmarking”, Security Management, Vol.39.,
N o .l ,p p . 23-25161.Holt, B., (1994), “Benchmarking comes to HR”, Personnel Management, Vol.26., N o.6, pp. 32-35162.Houshmand, A.A., Papadakis, C.N., and Ghoshal, S., (1995), “Benchmarking total quality programmes
in engineering colleges”. Quality management Journal, Summer, pp. 44^57163.Howe, S.W., and Martin, G., (1998), “Internalisation Strategies for management education”, Journal o f
Management Development, Vol. 17., No.6, pp. 447-462164.HRFocus, (1993), “The benchmarking boom”, HRFocus, Vol.70, No.4, pp.5-7165.Hsien - Chen, W., (1998), “Benchmarking quality goals in service systems”. Journal o f services
Marketing, Vol. 12., No.2, pp. 113-128166.Hunter, D., and Shearman, J., (1992), “Benchmarking”, Public Utilities Fortnightly, December, I, pp.
25-27167.Hutton, R., and Zairi, M., (1994), “D2D: a quality winners approach to benchmarking”. Benchmarking
fo r Quality Management and Technology, V o l.l ., N o.3, pp. 21-38168.Hyland,P., and Beckett, R., (2002), “Learning to compete: the value o f internal benchmarking”,
Benchmarking: an International Journal, Vol. 9 No. 3, pp. 293 -304169.1nger. M., (1993), “Healthcare: a lesson in benchmarking for educators”, lEE Brief, N o.9., pp 2-5nO.lstvan, R.L., (1992), “A new productivity paradigm for competitive advantage”. Strategic Management
Jowr«a/, Vol. 13, pp. 525-537171.Jackson, A.E., Safford, R.R., and Swart, W.W., (1994), “Roadmap to Current benchmarking
literature”. Journal o f Management in Engineering, Vol. 10., N o.6., pp. 60-65172.Jackson, N., (2001), “Benchmarking in UK HE: an overview”. Quality Assurance in Education, Vol.
9 .,N o . 4, pp. 2 1 8 -2 3 5173.Jane-Davies, A., and Kumar-Kochhar, A., (1999), “Why British Companies Don't do effective
benchmarking”. Integrated Manufacturing Systems, Vol. 10., N o .l , pp. 26-32
49
174.Jeffcoate, J., Chappell, Caroline., and Feindt, Sylvie., (2002), “Best practice in SME adoption o f e- commerce”. Benchmarking: an InternalionalJournal, Vol. 9, No.2, pp. 122-132
175.Jennings, K., and Westfall, F., (1992), “Benchmarking for strategic action”. Journal o f Business Strategy, V o l.13., N o.3, pp. 22-25
176.Johne, A., and Snelson, P., (1988), “Auditing product innovation activities in manufacturing firms”, R (& D Management, Vol. 18., No.3, pp. 227-233
177.Johnson, B., and Chambers, M., (2000a), “Expert panel identifies activities and performance measures for food service benchmarking”. Journal o f the American Dietetic Association, V o l.100 No.6, pp. 692
178.Johnson, B., and Chamers, M.J., (2000b), “Foodservice benchmarking: practices, attitudes, and beliefs o f food service directors”. Journal o f the American D ietetic Association, Vol. 100, N o.2, pp. 175
179.Johnson, S.E., (1992), “Benchmarking facility management practices”. Modern Office Technology, V ol.37., N o.6, pp. 64-66
180. Johnston, W.M., and Kirch, D.P., (1996), “Benchmarking peer reviews”. Internal Auditor, December, pp. 42-46
181.Jones, R., (1999), “The role o f benchmarking within the cultural refomi journey o f an award-winning Australian local authority”, Benchmarking: an International Journal, Vol.6., N o.4, pp. 338-349
182.Julien, F.W, (1993), “The power o f benchmarking”. Internal Auditor, Vol.50, N o.4, pp. 22-28183.Karch, K.M., (1992), “Getting organisational buy in for benchmarking: environmental management at
Weyerhaeuser”, National Productivity Review, Vol. 12., No. 1, pp. 13-22184.Keehley, Patricia., and Mac-Bride, Sue, A., (1997), “Can benchmarking for best practices work for
Government?”, Quality Progress, March, pp. 75-80185.Kharbanda, M., (1993), “Benchmarking: making it work”, CMA Magazine, Vol.67., No.2, pp. 30-33186.Kimmerling, G., (1993), “Benchmarking: gathering best practices”. Training and Development,
V ol.47., N o.9, pp. 28-36187 .King, G.C., (1996), “Benchmarking Management Education: what the best schools are doing to insure
currency, (Unpublished Article).188.King, J., (1993), “Benchmarking on empty”. Computer World, Vol.27., N o.51, pp. 73-75, 78189.Kinni, T.B., (1994), “Best Practices Revealed”, Industry Week, Vol.243., No.22, pp. 30-32190.Kinni, T.B., (1994), “Measuring up: benchmarking can be critical, but it doesn't have to be expensive”,
Industry Week, Vol.243., No.22, pp. 27-28191 .Kobe, G., (1993), “Better benchmarking “, Automotive industries, Vol. 173., N o.3, pp. 45-47192.Krause. I., and Liu, J., (1993), “Benchmarking R & D productivity”, Planning Review, Vol.21., N o .l ,
16-21, pp. 52-53193.Kumar, A., Motwani, J., Douglas, C., and Das, N., (1999), “A quality Competitiveness index for
benchmarking”. Benchmarking: an International Journal, Vol.6., N o .l , pp 12-21194.Kumar, S., and Chandra, C., (2001), “Enhancing the effectiveness o f benchmarking in manufacturing
organisations “, Industrial Management and Data Systems, Vol. 101., No.2, pp. 80-89195.Lagoe, R., and Aspling, D., (1997), “Benchmarking and clinical pathway implementation on a
multihospital basis”. Nursing Economics, Vol. 15, N o.3, pp. 131 (7)196.Lagoe, R., Arnold, K., and Noetscher, C., (1999), “Benchmarking hospital lengths o f stay using
histograms”. Nursing Economics, Vol. 17, No.2, pp. 75(1)197.Lagoe, R.,Noetscher, C., and Murphy, M., (2000), “Combined benchmarking o f hospital outcomes and
utilization”. Nursing Economics, V ol.18, No.2198.Laughame, M., (2002), “Benchmarking academic standards”. Quality Assurance in Education, V o l.10,
N o.3, pp. 1 3 4 -1 3 8199.Le, Sueur, M., and Dale, B.G., (1997), “Benchmarking: a study in the supply and distribution o f spare
parts in a utility”. Benchmarking fo r Quality Management and Technology, Vol.4., No.3, pp. 189-201200 .Lee, H., and Howard, J.L., (1994), “Measuring the quality o f services; the use o f internal climate”.
Benchmarking fo r Quality Management and Technology, V o l.l., No.3, pp. 39-51201.Lema, N.M ., and Price, A.D.F., (1995), “Benchmarking: performance improvement toward
competitive advantage”, Journal o f Management in Engineering, V ol.l 1., N o .l , pp. 28-37202.Lenckus, D., (1993), “Does benchmarking Control costs? Uh huh”. Business Insurance, December, 6,
pp. 12-14203.Lenckus, D., (1993), “Risk Managers warming up to benchmarking projects”. Business Insurance,
December, 6, pp. 3-6
50
204.Lewis, B.C., and Albert, E, Crews, E., (1985), “The Evolution o f benchmarking as a Computer perfonnance evaluation technique”, MIS Quarterly, Vol.9., N o .l, pp. 7-16
205 .Lincoln, S., and Price, A., (1996), “What benchmarking books don't tell you?”. Quality Progress, March, pp. 83-86
206.Linsenmeyer, A., (1991), “Fad or fundamental”. Financial World, September, 17, pp. 34-35207 .Lomas, L., (1999), “The culture and quality o f higher education institutions: examining the links”.
Quality assurance in Education, Vol.7., N o .l, pp. 30-34208.Longbottom, D., (2000), “Benchmarking in the UK: an emperical study o f practitioners and
academics’. Benchmarking: an InternationalJournal, Vol.?., No.2, pp. 98-117209.Longowitz, N.S., and Rao, A., (1995), “Effective benchmarking: learning fi-om host's viewpoint”.
Benchmarking fo r Quality Management and Technology, Vol.2., No.2., pp. 55-63210.Lorence, D., (1994), “Benchmarking quality under USA healthcare reform: the next generation”.
Quality Progress, Vol.27., No.4, pp. 103-10721 l.Low is, B.C., and Albert, C.E., (1985), “The Evolution o f benchmarking as a computer performance
evaluation technique”, MIS Quarterly, Vol.9., N o .l , pp. 7-16212.Lu, M.H., Madu, C.N., Kuei, C., and Winokur, D., (1994), “Integrating QFD, AHP and benchmarking
in strategic marketing”, Journal o f Business and Industrial Marketing, Vol.9., N o .l , pp. 41-50213.Lucertini, M., N icolo, P., and Telmon, D., (1995), “Integration o f benchmarking and benchmarking o f
integration”, InternationalJournal o f Production Economics, V ol.38., N o .l, pp. 59-712 14 .Madu, C.N., and Hua, Kwei-Chu., (1998), “Application o f Data envelope analysis in benchmarking”.
International Journal o f Quality Science, Vol.3., No.4, pp. 320-327215.Maheshwari, S.K., and Zhao, X., (1994), “Benchmarking quality practices in India”, Benchmarking fo r
Quality Management and Technology’, V o l.l., No.2, pp. 5-23216 .Main, J., (1992), “How to steel the best ideas around”. Fortune, Vol.126., No.8, pp. 102-106217 .Malcolm, I., (1997), “Benchmarking performance Gap - Real or a problem o f definition”,
Management Accounting, pp. 38-39218.M alec, H.A., (1994), “Benchmarking barometers for products and processes”, Quality and Reliability
Engineering International, Vol. 10., N o.6, pp. 455-465219. Mann, L., Samson, D., and Dow, D., (1998), “A field experiment on the effects o f benchmarking and
goal setting on company sales performance”. Journal o f Management, Vol.24, No. 1, pp. 73(24)2 20 .Mann, R., (1998), “Best Practices in food and drinks industry”. Benchmarking fo r Quality
Management and Technology’, V ol.5., N o.3, pp. 184-199221 .Markin, A., (1992), “How to implement competitive cost benchmarking?”. Journal o f Business
Strategy, Vol. 13., N o.3, pp. 14-20222 .Martin, Patrica., (1991), “Benchmarking: a leg upon the learning curve”. Manage, May, pp. 30-33223.Maturi, Richard, J., (1990), “Benchmarking the search for quality”, The Financial Manager,
March/April, 26-31.224.M atzko, M., and Wingfield, C., (1995), “Coming: a source o f Competitive benchmarking for retail
distribution strategy”. Journal o f Retail Banking, Vol. 17., No.2, pp. 9-14225 .Me Adam, R., and Kelly, M., (2002), “A business excellence approach to generic benchmarking in
SMEs”, Benchmarking: an International Journal, Vol. 9, N o .l , pp. 7-272 2 6 .Me Gaughey, N., (1993), “Customer Service: lessons from World-Class Companies”, Industrial
Engineering, March, pp. 18-20227. Me Gonagle, John, J, Jr., (1992), “Benchmarking and Competitive intelligence”. Journal fo r quality
and participation. Vol. 15., No.5, pp. 30-352 28 .Me Gonagle, John, J, Jr., and Fleming, D., (1993), “New options in benchmarking”. Journal fo r
quality and participation". Vol. 16., No.4, pp. 60-67229. Me Gonagle, John, J, Jr., and Fleming, D., (1998), “Options in benchmarking”. Journal fo r quality and
participation, Mar/April, pp. 38-42230.Me Namee, P., and Greenan, K., (1999), “The Competitive analysis model. A new approach to
strategic development for small businesses”, Benchmarking: an International Journal, V ol.6., No.2, pp. 125-139
231.Mentzer, J., Bienstock, C. and Kahn, K., (1999), “Benchmarking sales forecasting management”, Business Horizons, Vol.42, No.3, pp. 48(9)
232 .Meyer, R., (1991), “Preserving the WA”, Financial World, V o l.160., N o .l9 , pp. 52-54
51
233.Micklewright, M.J., (1993), “Competitive benciimarking: Large gains for small companies”, Quality Progress, Vol.26., No.6, pp. 67-68
234.M illen, R., Sohal, A., Dapiran, P., Leib, R., and Wassenhove, Luk, N.Van., (1997), “Benchmarking Australian Finns' usage o f contract logistics services: a comparison with American and Western Europian practice”, Benchmarking fo r Quality Management and Technology, Vol.4., N o .l , pp. 34-46
235 .Miller, J., (1992a), “Measuring progress through benchmarking”, CMA Magazine, May, p. 37236.M iller, J., (1992b), “Benchmarking Performance”, CMA Magazine, June, p. 23237 .Min, H., and Min, H., (1996), “Competitive benchmarking o f Korean Luxury hotels using Analytic
Hierarchy Process and Competitive Gap Analysis”, The Journal o f Services Marketing, Vol. 10., No.3, pp. 58-72
238.Min, H., and Min, H., (1997), “Benchmarking the quality o f hotel services: managerial perspectives”, International Journal o f Quality and Reliability Management, Vol. 14., No.6, pp. 582-597
239.Mittelstaedt, R.E., Jr., (1992), “Benchmarking: How to learn fi'om best in class practices”, National Productivity Review, V o l.12., No.3, pp. 301-315
240.M oad, J., (1994), “Successful benchmarking with the team approach”, Datamation, Vol.40., No.3, pp. 53-56
241.M onczka, R., and Morgan, J., (1993), “Benchmarking; what you need to do to make it work’. Purchasing, V ol.l 14., N o .l, pp. 63-69
242.Monkhouse, E., (1995), “Role o f competitive benchmarking in small and medium enterprises”. Benchmarking fo r Quality Management and Technology, Vol.2., N o.4, pp. 41-50
243.Morey, R.C., and Dittman, D.A., (1995), “Evaluating a hotel GM's performance: a case study in benchmarking”, Cornell Hotel and Restaurant Administration Quarterly, Vol.36., No.5, pp. 30-35
244 .Morgan, J., (1996), “Benchmarking is not an instant hit”, Purchasing, pp. 42-47245.M orling, P. and Tanner, S., (2000), “Benchmarking a public service business management system”.
Total Quality Management, pp. S 4 17246.Mukherjee, A., Nath, P, and Pal, M.N., (2002), “Performance benchmarking and strategic
homogeneity o f Indian banks”. The International Journal o f Bank Marketing, Vol. 20 No. 3, pp. 122 - 139
247.Muthu, S., Devadasan, S.R., Ahmed, Saleem. et.al., (2000), “Benchmarking for Strategic maintenance quality improvement “, Benchmarking: an International Journal, Vol.7., N o.4, pp. 292-303
248.Nacker, M., (1997), “Telecommunications; Benchmarking proven practices”. Credit World, pp. 5 ~ 17249.Nandi, S.N., (1993), “Interfirm comparison for productivity improvement”, APO Productivity Journal,
pp. 153-180250.Nath, P., and Mrinalini, M., (2000), “Benchmarking the best practices o f non-corporate R & D
organisations “, Benchmarking: an International Journal, Vol.7., No.2, pp. 86-97251.Newman, G., (1992), “A True advance or merely a fad”. Across the board, June, pp. 9-10252.0binata, Y., (1994), “Benchmarking: the Japanese experience”. Long Range Planning, Vol.27., No.4,
pp. 48-53253.O'Dell, C., Wiig, K., and Odem, P., (1999), “Benchmarking Unveils emerging knowledge
Management Strategies”, Benchmarking: an International Journal, Vol.6., No.3, pp. 202-211254.0gava, D., and Ketner, L., (1997), “Benchmarking Product Development”, Telephony, pp. 34-38255 .0g ilv ie , T.J., (1993), “Lost in Space: typical benchmarking problems”. Management Review, Vol.82.,
N o.9, pp. 20-22256 .Oliver, G.A., and Me Donald, L.L., (1995), “Benchmarking the business”, M ortgauge Banking,
V ol.56., N o .l , pp. 141-152257.0ttenhouse, D., (1994), “Making benchmarking faster. Cheaper and easier “, CMA Magazine, Vol.68.,
N o .l, pp. 23-26258.Overman, S., (1993), “In search o f best practices”, HRMagizine, Vol.38, N o .l2 , pp. 48-50259.Owen, J., (1992), “Benchmarking World-Class manufacturing”. Manufacturing Engineering, March,
pp. 29-34260.Pansley, D.L., (1993), “Training managers to benchmark”. Planning Review, V ol.21., N o .l , pp. 26-32261.Parisean, S.E., (1997), “Addressing service quality in schools o f business”. International Journal o f
Quality and Reliability Management, Vol. 14., No.3, pp. 204-218262 .Parker, N., (1998), “The employment service benchmarking study: internal vacancy filling”.
Benchmarking fo r Quality Management and Technology, Vol.5., No.3, pp. 200-224
52
263.Partovi, F.Y., (1994), “Determining what to benchmaric: an analytic hierarchy approach”, International Journal o f Operations and Production Management, Vol. 14., No.6, pp. 25-39
264 .Payne, J.S., and Blackboum, J.M., (1993), “Learning through Benchmarking”, Jonrnal o f Quality and Participation, Vol. 16., N o.5, pp. 62-65
265 .Payne, S.L., and Whitfield, M.J., (1999), “Benchmarking for Business schools/Colleges: implementing an alternative partnership approach”, Journal o f Education fo r Business, pp. 5-9
266.Per, V.F., and Hollensen, S., (2001), "The process o f benchmarking, benchleaming and benchaction", TQM-Magazine, Vol. 13., N o .l, pp. 25-33
267.Petrick. J., Scherer, R., Crabtree, Wilson, J., and Westfall, P., (1994), “Benchmarking and improving core competencies”. Journal o f Quality and Participation, Vol. 17., N o.4, pp. 62-65
268.Pfohl, Hans - Christian., and Ester, B., (1999), “Benchmarking for spare parts logistics”, Benchmarking : an International Journal, V ol.6., N o .l, pp. 22-39
269 .Poirier, C.C., (1994), “Outward looking companies benchmark to surpass current performance levels”. Paperboard Packaging , Vol.79., N o.9, pp. 26-28
270 .Port, O., and Smith, G., (1992), “Beg-borrow-and benchmark”. Business Week, November, 30, pp. 74- 75
271.Powers, V.J., (1996-97), "Benchmarking study illustrates how best-in-class achieve alignment, communicate change". Communication World, pp. 30-33
272 .Prado, Carles., Prado, J., (2001), “Benchmarking for the development o f quality assurance systems”. Benchmarking: an International Journal, Vol.S., N o .l , pp. 62-69
273.Prairie, P., (1993), “An American Express/IBM consortium benchmarks information technology”. Planning Review, Vol.21., N o .l , pp. 22-27
274.Press, G., (1991), “Benchmarking - Is your research department best?”. Marketing News, Vol.28., No. 18, pp. 24
275.Prestly, T., (1993), “Getting benchmarking right from the beginning and keeping it on track”, Proceedings o f UR Ltd., Industrial Conference, London
276.Prior-Smith, K., and Perrin, M., (1996), "Ideas on motivating people, addressing complaints and training (IMPACT): An application o f benchmarking", Benchmarking fo r Quality Management and 7’ec/;«o/ogv, Vol.2., N o .l, pp. 7-25
277 .Pryor, L.S., (1989), “Benchmarking - A self improvement strategy”, Journal o f Business Strategy, Vol.10., N o.6, pp. 28-32
278 .Pryor, L.S., and Katz, S.J., (1993), “How benchmarking goes wrong (and how to do it right)”. Planning Review, Vol.21., N o .l, pp. 6 - 11
279.Pulat, B.M., (1994), “Benchmarking is more than organised tourism”. Industrial Engineering, Vol.26., N o.3, pp. 2-23
280.Pulat, B.M ., (1994), “Process improvements through benchmarking”, TQM-Magazine, Vol.6., No.2, pp. 37-40
281 .Purchasing, (1994), “Benchmarking turns a comer”, Purchasing, V ol.l 17, N o.7, pp. 4-6282.Quality and Productivity Management Association”, (1991), “Benchmarking, The IBM-Rochester
way". Commitment Plus, Vol.66., No. 12, pp. 2-4283.Raghunath, R., (1998), “Quality standards for business Schools”, Financial Express, November, 25
284.Ramabadron, R., James W.D. Jr., and James, E.R., (1997), “Benchmarking and project management; a review and organisational model”. Benchmarking fo r Quality Management and Technology, Vol.4., N o .l, pp. 47-56
285.Ransley, D.L., (1993), “Training managers to benchmark”. Planning Review, Vol.21., N o l, pp. 32-36286.Razmi, J., Zairi, M., and Jarrar,Y.F., (2000), “The application o f Graphical techniques in evaluating
benchmarking partners”. Benchmarking: an International Journal, Vol.7., N o.4, pp. 304-314287.Relihan, K.A., (1997), “The role o f benchmarking analysis in measuring and improving workplace
safety”, Professional Safety, ASSE, pp. 28-31288 .Richardson, H.L., (1992), “Improve quality through benchmarking”. Transportation and Distribution,
V ol.33.,N o.lO , pp. 30-37289.Richman, T., and Koontz, C., (1993), “How benchmarking can improve business re-engineering”.
Planning Review", Vol.21., N o.6, pp. 26-27290.Rigby, D.K., (1995), “Managing the management tools”. Engineering Management Review, Spring,
pp. 88-92
53
291 .Robson, A., and Prabhu, V.B., (2001), "What can we learn from leading service practitioners about business excellence?", Managing Service Quality, Vol. 11 No. 4, pp. 249 - 261
292.Roche, Edward-Mozley, (1997), “Benchmarking with product life cycle analysis in semiconductor industry”, Information Resources Management Journal, Fall, pp. 4-14
293.Rodwell, J.J., Lam, J., and Fastenau, M., (2000), “Benchmarking human resources and benchmarking o f benchmarking”, Employee relations, Vol.22., N o.4, pp. 356-374
294.Rogers, Philip, B., (1997), “Raising the bar”. Journal o f Property Management, V ol.62., No.6, pp. 48- 51
295 .Roth, M., (1992), “Improving performance with process analysis”, Risk Management, November, pp.47-53
296 .Ryan, C., (1993), “Using peer group benchmarks as analytical tools”, National Underwriter, August, 16, pp. S6 - S8
297. Sarkis, J., (2001), “Benchmarking for Agility”, Benchmarking: an International Journal, Vol.S., No.2, pp. 88-107
298.Sasenick, S.M., (1993), “Benchmarking - tales from the front”. Healthcare Forum Journal, Jan/Feb, pp. 37-52
299.Schefczyk, M., (1993), “Industrial benchmarking: a case study o f performance analysis techniques”. International Journal o f Production Economics, Vol.33., N o .l, pp. 1-11
300.Schmidt, J.A., (1992), “The link between benchmarking and the share holder value”. Journal o f Business Strategy, V o l.13., No.3, pp. 7-12
301.Schroeder, S., (1996), “How can we tell whether there are too many or too physicians? The case for benchmarking”, JAMA, The Journal o f the American M edical Association, V ol.276, No.22, pp. 1841(3)
302 .Schumann, C.A.W., (1996), “Benchmarking: performance improvement toward competitive advantage”. Journal o f Management in Engineering, pp. 59-61
303.Shafer, B., and Coate, E., (1992), “Benchmarking in higher education”, NACUBO Business Officer, November, pp. 27-35
304.Sharif, A.M ., (2002), “Benchmarking performance management systems”, Benchmarking: an International Journal, Vol.9., N o .l, pp. 62 - 85
305.Sharman, P., (1992), “A toolkit for continuous improvement”, CMA-Magazine, May, pp. 17-20 306.Sharman, P., (1992), “Benchmarking: opportunity for accountants”, CMA-Magazine, July/August, pp.
16-18307.Shaughnessy, T.W., (1993), “Benchmarking: total quality management and libraries”. Library
Administration and Management, Vol.7., N o .l, pp. 7-12 308.Shaw, M., and Green, H.D., (2002), “Benchmarking the Ph.D. - a tentative beginning”. Quality
Assurance in Education, Vol. 10., No.2, pp. 116 - 124 309.Shen, X.X., Tan, K.C., and Xie, M., (2000), “Benchmarking in QFD for quality improvement”.
Benchmarking: an International Journal, V ol.7., No.4, pp. 282-291 310.Shen-Then, Danny Shiem., (1996), “Minimum Data Sets - Finding the balance in benchmarking”.
Facilities, Vol. 14., No. 1/2, pp. 47-51 311.Sheridan, J.H., (1993), “Lessons from the best”, Industry Week, February, 15, pp. 54-63 312.Sheridan, J.H., (1993), “Where benchmarkers go wrong”. Industry Week, Vol.242., N o.6, pp. 28-30 313.Shetty, Y.K., (1993), “Aiming high! Competitive benchmarking for superior performance”. Long
Range Planning, Vol.26., N o .l , pp. 39-44 314.Sillyman, S., (1992), “Guide to benchmarking resources - Benchmarking is a tool to help improve
processes and thus improve end products and services”. Quality, March, pp. 17-18 315.Simmons, Linda, C., (1996), “The Nuances o f benchmarking”. Mortgage Banking, pp. 95-96 316.Simpson, M., and Kondouli, D., (2000), “A practical approach to benchmarking in three service
industries”. Total Quality Management, pp. S623 317.Simpson, M., Kondouli, D., and Wai, P., (1999), “From benchmarking to business process re
engineering a case study”, Total Quality Management, pp. S717 318 .Sinclair, D., and Zairi, M., (1995), “Benchmarking best practice performance measurement within
companies using TQM”, Benchmarking fo r Quality Management and Technology, Vol.2., No.3, pp.53-71
319.Singh, D.P., (1997), "Benchmarking - Swifter, higher. Stronger", Analyst, pp. 14-25
54
320.Singleton-Green, B., (1992), “Benchmarking: compare and compete”, Accountancy, V o l.110, No. 1190, pp. 40-1
321.Singleton-Green, B., (1992), “Compare and Compete”, Accountancy, October, pp. 40-41322. Smith, S., (1997), “Benchmarking: lessons for disciplined improvement”, HE Solutions, pp. 40-45323.Soderberg, L., and O ’Halloran, D., (1992), “Engineering beyond the stars”, Machine Design, October.
22, pp. 75-79324.Sohal, A.S., and Lu, Edmund., (1995), “Quest for quality at Safeway - Australia”, Benchmarking fo r
Quality Management and Technology, Vol.2., N o.2, pp. 37-54325.Sohal, A.S., Burcher, P.G., Millen, R., and Lee, Gloria., (1999), “Comparing American and British
practices in AMT adoption”, Benchmarking: an InternationalJournal, Vol.6., N o.4, pp. 310-324326.Spendolini, M.J., (1992), “The benchmarking process”. Compensation and Benefits Review, Vol.24.,
No.5, pp. 21-29327.Spitzer., R., (1993), “Valuing TQM through rigorous financial analysis”. Quality’ Progress, July, pp.
49-54328.Sprow, E., (1993), “Benchmarking: a tool for our time”, Manufacturing Engineering, September, pp.
56-69329.St.Clair, G., (1993), “The fijture challenge: management and measurement”. Special libraries. V ol.84,
N o.3 ,pp . 151-154330.Strategic Direction, (2002), “Evaluating improvement programs”. Strategic Direction, Vol. 18., No.3,
pp. 10-12331 .Stratton, B., (1993), “Benchmarking; just do it”, Quality Progress, May, pp. 5332.Subramanian, S.K., (1984), “Interfirm Comparison - Some experiences", Asian Productivity-
organisation333.Sweeney, M.T., (1994), “Benchmarking for strategic manufacturing management”. International
Journal o f Operations and Production Management, Vol. 14., No.9, pp. 4-15334.Talluri, S., and Sarkis, J., (2001), “A computational Geometry approach for benchmarking”.
International Journal o f Operations and Production Management, V o l.21., No. 1 /2, pp. 210-222335.Tang, K. and Zairi, M., (1998a), “Benchmarking quality implementation in a service context: a
comparative analysis o f financial services and institutions o f higher education: part I”, Total Quality Management, Vol.9, No.6, pp. 406
336.Tang, K. and Zairi, M., (1998b), “Benchmarking quality implementation in a service context: a comparative analysis o f financial services and institutions o f higher education: part U”, Total Quality Management, Vol.9, No.7, pp. 539
337.Tang, K.H. and Zairi, M., (1998c), “Benchmarking quality implementation in a service context: a comparative analysis o f financial services and institutions o f higher education: part 111”, Total Quality’ Management, Vol.9, No.8, pp. 669
338.Thompson, I., and Cox, A., (1997), "Don't imitate, innovate", Supply Management, pp. 40-43339.Treadwell, B., (1998), "Benchmarking Treasury: looking for standards”, Australian CPA, pp. 49-51340.Tucker, F.G., Zivan, S.M., and Camp. R.C., (1987), “How to measure yourself against the best”.
H arvard Business Review, Vol.87., N o .l , pp. 2-4341.Tutcher, G., (1994), “How successfiil companies can improve through internal benchmarking”,
M anaging Service Quality, Vol.4., No.2, pp. 44-46342.Tuttle, G., (1993), “Cascading quality through the training process”. Quality Progress, April, pp. 75-78343.Tyndall, G., (1990), “How you apply benchmarks makes all the difference”. Marketing News,
November, 12, pp. 10-19344.Ulusoy, Gilnduz., and I. Kiz, I.lknur. (2001), “Benchmarking best manufacturing practices; A study
into four sectors o f Turkish industry”, International Journal o f Operations & Production Management, Vol. 21., No. 7,6, pp. 1020-1043
345.Underdown, R., and Talluri, S., (2002), “Cycle o f success: a strategy for becoming agile through benchmarking”. Benchmarking: an International Journal, Vol.9., No. 3, pp. 278 - 292
346.Vaziri, H.K., (1992), “Using competitive benchmarking to set goals”. Quality Progress, Vol.25., No. 10, pp. 81-85
347.Vaziri, H.K., (1993), “Questions to answer before benchmarking”. Planning Review, Vol.21., N o .l , pp. 37
348.Venetucci, R., (1992), “Benchmarking: a reality check for strategy and performance objectives Production and Inventory”, Management Journal, Vol.33., No.4, pp. 32-36
55
349-Verschoor, C., (1993), “Benchmarking the audit committee”, Journal o f Accountancy, September, pp. 59-64
350. Vig, S.N., (1995), “Benchmarking: a select Bibliography”, Productivity, \ o \ 3 6 . , No.3, pp. 521-524351.Voss, C.A., and Blackmon, K., (1997), “Benchmarking and operational performance; some empirical
results”. Benchmarking fo r Quality Management and Technology, Vol.4., No.4, pp. 273-285352.Voss, C.A., Chiesa, V., and Coughlan, P., (1994), “Developing and testing benchmarking and self
assessment frameworks in manufacturing”, International Journal o f Operations and Production Management, V o l.14., N o.3, pp. 83-100
353.Wah-Fond, S., Cheng, E.W.L., and Ho, Danny, C.K., (1998), “Benchmarking: a general reading for management practitioners”, Management Decision, Vol.36., No.6, pp. 407-418
354. Wallace, J.B., (1995), “Treasury Benchmarking”, Journal o f working capital Management, Vol.2., N o.2, pp. 37-41
355.W alleck, A.S., O'Halloran, J.D., and Leader, C.A., (1991), “Benchmarking world-class performance”. The Mckinsey Quarterly, N o .l, pp. 3-24
356.Walsh, J., (1992), “The pursuit o f benchmark: how Nissan/Infiniti developed its service standard”, M idtinational Business, No.4, pp. 19-26
357 .Wan Endut, W., Abdullah, M., and Husain, N., (2000), “Benchmarking institutions o f higher education”. Total Quality Management, pp. S796
358.Watson, G.H., (1993), “How process benchmarking supports Corporate strategy”. Planning Review, V o l.2 1 .,N o .l,p p . 12-15
359. Weatherly, J.D., (1992), “Dare to compare for better productivity”, HR-Magazine, V ol.37., No.9, pp. 42-46
360. Webster, C., and Lu, Yi-Chen, (1995), “Using IDEAS to get started on benchmarking”. Managing Service Quality, Vol.5., N o.4, pp. 49-56
361.W eeler, D.L., (1996), “Benchmarking a paradigm for change to quality education”, TQM Magazine, Vol.8., N o.6, pp. 24-29
362.Weimer, G.A., (1992), “Benchmarking maps the route to quality”. Industry Week, Vol.241., No. 14, pp.54-55
363.Weisendanger, B., (1992), “Benchmarking for beginners”. Sales and Marketing Management, V o l.l4 4 „ N o .l4 , pp. 59-64
364.Weisendanger, B., (1993), “Benchmarking intelligence fiiels management moves”. Public Relations Journal, Vol49., N o .l 1, pp. 20-22
365.W elleck, A., Steven, O'Halloran, J.D., and Charles, L.A., (1991), “Benchmarking and world class performance”, The Mckinsey Quarterly, N o .l, pp. 3-24
366.W endel, C., (1993), “4 sharp tools for measuring how your bank measures up”, American Banker, September, 27, pp. 18-19
367. Whiting, R., (1991), “Benchmarking: lessons from the best-in-class”, Electronic Business, October, 7, pp. 128-134
368 .\^ ym ark , J., (1998), “Benchmarking and credit risk management in financial services”. Benchmarking fo r Quality Management and Technology, Vol.5., No.2, pp. 126-137
369 .Williams, G., (1995), “Academic standards in higher education: a framework for investigation and discourse at institutional level”. Quality Assurance in Education, Vol.3., No.4, pp. 35-43
370.Yasin M.M., and Zimmer T.W., (1996), “The role o f benchmarking in achieving continuous service quality”, International Journal o f Contemporary Hospitality Management, Vol.7., No.4, pp. 27-32
371.Vasin, M.M., (2002), “The theory and practice o f benchmarking: then and now”. Benchmarking: An International Journal, Vol. 9., No. 3, pp. 217 - 243
372.Yun, Chang-Zeph., (1997), “A PC-based system for benchmarking quality management Via ISO-9000 auditing”, Benchmarking fo r Quality Management and Technology, Vol.4., No.3, pp. 213-220
373.Zairi, M., (1992), “The art o f benchmarking using customer feedback to establish performance gap”. Total Quality Management, Vol.3., No.2, pp. 177-188
374.Zairi, M., and Youssef, M., (1995), “Benchmarking critical factors for TQM; Part-I: theory and foundations”, Benchmarking fo r Quality Management and Technology, Vol.2., N o .l , pp. 5-20
375.Zairi, M.,and Youssef, M., (1995), “Benchmarking Critical factors for TQM; Part-ll; Empirical results from different regions o f the world”. Benchmarking fo r Quality Management and Technolog}’, Vol.2., N o.2, pp. 3-19
56
376.Zairi, Mohamed and Youssef, Mohammed., (1995), “A review o f key publications on Benchmarking: Part-1”, Benchmarking fo r Quality Management and Technology, Vol.2., N o .l , pp. 65-72
377.Zairi, Mohamed and Youssef, Mohammed., (1996), “A review o f key publications on Benchmarking: Part-11”, Benchmarking fo r Quality Management and Technology, Vol.3., N o .l, 45-49
378.Zairi, M., (1998), “Benchmarking at TNT Express”, Benchmarking fo r Quality Management and Technology, Vol.5., No.2, pp. 138-149
379.Zairi, M., (1998), “Benchmarking partner selection principles”. Benchmarking fo r Quality Management and Technology, Vol.5., N o.2, pp. 80-92
380.Zairi, M., and Ahmed, P.K., (1999), “Benchmarking maturity as we approach the millennium?”. Total Quality Management, July, Vol. 10, pp. 810-817
381.Zairi, M., and Whymark, J., (2000), “Transfer o f best practices - How to build a culture o f benchmarking and continuous learning: Part - 1”, Benchmarking: an International Journal, Vol.7., N o .l, pp. 62-78
382.Zairi, M., and Whymark, J., (2000), “Transfer o f best practices - How to build a culture o f benchmarking and continuous learning: Part - II”, Benchmarking: an International Journal, Vol.7., No.2, pp. 146-167
383.Zhao, X., Maheshwari, S.K., and Zhang, J., (1995), “"Benchmarking quality practices in India, China and M exico”, Benchmarking fo r Quality Management and Technology, Vol.2., N o.3, pp. 20-40
384. Zoins, B., (1998), “How benchmarking is evolving and recommendations to support these changes”. The Quality Network, Benchmarking exchange.
57
top related