certificate of approval no cf 5475... · chairman certification manager. impartiality committee....
Post on 27-Sep-2020
3 Views
Preview:
TRANSCRIPT
This certificate is the property of Exova (UK) Limited trading as Warrington Certification Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429
Signed and sealed for and on behalf of Exova (UK) Limited trading as Warrington Certification
Sir Ken Knight Paul Duggan Chairman Certification Manager
Impartiality Committee
CERTIFICATE OF APPROVAL No CF 5475
This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products
The undermentioned products of 1
Page 1 of 18
JOTUN ABU DHABI Po Box 3714, Mussafah Ind. City, Abu Dhabi
Tel: +971 50 4449578
Have been assessed against the requirements of the Technical Schedule(s) denoted below and are approved for use subject to the conditions
appended hereto: _____________________________________________________________________________________________________
CERTIFIED PRODUCT TECHNICAL SCHEDULE Steelmaster 120SB TS15 Intumescent Coatings for
Steelwork
Issued: 7th October 2016 Valid to: 29th March 2021
This certificate is the property of Exova (UK) Limited trading as Warrington Certification
Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429
CERTIFICATE No CF 5475 JOTUN ABU DHABI
Page 2 of 18 Signed E/140, AH/007 & AH/022
Issued: 7th October 2016 Valid to: 29th March 2021
Steelmaster 120SB 1. This approval relates to the use of Steelmaster 120SB for the fire protection of
I-shaped steel sections and hollow columns. The precise scope is given in Tables 1 to 16 which show the total dry film thickness of Steelmaster 120SB (excluding primer and top sealer) required to provide fire resistance periods in accordance with BS476: Part 21: 1987 of 30 minutes up to 120 minutes for differing sections and section factors.
2. This certification is designed to demonstrate compliance of the product or system
specifically with Approved Document B (England and Wales), Section 2 of the Technical Standards (Scotland), Technical Booklet E (N. Ireland). If compliance is required to other regulatory or guidance documents there may be additional considerations or conflict to be taken into account.’
3. The products are approved on the basis of:
i) Initial type testing. ii) A design appraisal against TS15.
iii) Certification of quality management system to ISO 9001: 2008. iv) Inspection and surveillance of factory production control v) Audit testing
4. The data referring to three-sided fire exposure of beams relate to beams supporting
concrete floor slabs. Separate consideration is required where this is not the case. 5. The data shown is applicable to steel sections blast cleaned to ISO 8501-1 SA21/2 or
equivalent and primed with a suitable and compatible primer. Specifications of surface preparations, primers and top sealers is available from Jotun Abu Dhabi Ltd (LLC) whose responsibility is to ensure that Steelmaster 120SB is compatible for use in respect of both ambient and fire conditions. The total dry film thickness of primer and top sealer together should not exceed that tested.
6. Specific data given in the tables applies to horizontal, vertical, flexural and compression
members supporting loads up to the maximum design loads specified in BS449: Part 2. These are as follows: I-sections beams at a temperature of 620oC I-sections columns at a temperature of 550oC Rectangular and circular hollow columns at a temperature of 520oC
7. The approval relates to on going production. Product and/or its immediate packaging is
identified with the manufacturers’ name, the product name or number, the CERTIFIRE name or name and mark, together with the CERTIFIRE certificate number and application where appropriate.
8. The data shown in the tables is based on an assessment that complies with the criteria
for acceptability now incorporated within the CERTIFIRE scheme.
This certificate is the property of Exova (UK) Limited trading as Warrington Certification
Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429
CERTIFICATE No CF 5475 JOTUN ABU DHABI
Page 3 of 18 Signed E/140, AH/007 & AH/022
Issued: 7th October 2016 Valid to: 29th March 2021
400oC 450oC 500oC 550oC 600oC 620oC 650oC 700oC
30 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.94235 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.94240 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.94245 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.94250 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.94255 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.94260 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.94265 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.94270 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.94275 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.94280 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.94285 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.94290 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.94295 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942100 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942105 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942110 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942115 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942120 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942125 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942130 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942135 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942140 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942145 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942150 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942155 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942160 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942165 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942170 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942175 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942180 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942185 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942190 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942195 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942200 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942205 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942210 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942215 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942220 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942225 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942230 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942235 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942240 0.960 0.942 0.942 0.942 0.942 0.942 0.942 0.942245 0.989 0.942 0.942 0.942 0.942 0.942 0.942 0.942250 1.017 0.942 0.942 0.942 0.942 0.942 0.942 0.942255 1.046 0.942 0.942 0.942 0.942 0.942 0.942 0.942260 1.074 0.942 0.942 0.942 0.942 0.942 0.942 0.942265 1.102 0.942 0.942 0.942 0.942 0.942 0.942 0.942270 1.131 0.942 0.942 0.942 0.942 0.942 0.942 0.942275 1.159 0.942 0.942 0.942 0.942 0.942 0.942 0.942280 1.187 0.942 0.942 0.942 0.942 0.942 0.942 0.942285 1.216 0.942 0.942 0.942 0.942 0.942 0.942 0.942290 1.244 0.942 0.942 0.942 0.942 0.942 0.942 0.942295 1.272 0.942 0.942 0.942 0.942 0.942 0.942 0.942300 1.301 0.942 0.942 0.942 0.942 0.942 0.942 0.942305 1.329 0.942 0.942 0.942 0.942 0.942 0.942 0.942310 1.358 0.942 0.942 0.942 0.942 0.942 0.942 0.942315 1.386 0.949 0.942 0.942 0.942 0.942 0.942 0.942320 1.414 0.977 0.942 0.942 0.942 0.942 0.942 0.942325 1.443 1.004 0.942 0.942 0.942 0.942 0.942 0.942330 1.471 1.032 0.942 0.942 0.942 0.942 0.942 0.942
Section Factor up
to m-1
Thickness (mm) Required for a Design Temperature of
I-Section Beams: 30 minutes
Steelmaster 120SB Table 1
Thickness is intumescent only. Beams with concrete slabs.
This certificate is the property of Exova (UK) Limited trading as Warrington Certification
Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429
CERTIFICATE No CF 5475 JOTUN ABU DHABI
Page 4 of 18 Signed E/140, AH/007 & AH/022
Issued: 7th October 2016 Valid to: 29th March 2021
400oC 450oC 500oC 550oC 600oC 620oC 650oC 700oC
30 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.94235 0.925 0.942 0.942 0.942 0.942 0.942 0.942 0.94240 0.978 0.942 0.942 0.942 0.942 0.942 0.942 0.94245 1.031 0.942 0.942 0.942 0.942 0.942 0.942 0.94250 1.085 0.942 0.942 0.942 0.942 0.942 0.942 0.94255 1.138 0.942 0.942 0.942 0.942 0.942 0.942 0.94260 1.191 0.957 0.942 0.942 0.942 0.942 0.942 0.94265 1.244 1.008 0.942 0.942 0.942 0.942 0.942 0.94270 1.297 1.058 0.942 0.942 0.942 0.942 0.942 0.94275 1.351 1.109 0.942 0.942 0.942 0.942 0.942 0.94280 1.404 1.159 0.942 0.942 0.942 0.942 0.942 0.94285 1.457 1.209 0.942 0.942 0.942 0.942 0.942 0.94290 1.510 1.260 0.962 0.942 0.942 0.942 0.942 0.94295 1.563 1.310 1.011 0.942 0.942 0.942 0.942 0.942100 1.616 1.361 1.060 0.942 0.942 0.942 0.942 0.942105 1.670 1.411 1.110 0.942 0.942 0.942 0.942 0.942110 1.723 1.461 1.159 0.942 0.942 0.942 0.942 0.942115 1.776 1.512 1.208 0.942 0.942 0.942 0.942 0.942120 1.829 1.562 1.258 0.942 0.942 0.942 0.942 0.942125 1.882 1.613 1.307 0.942 0.942 0.942 0.942 0.942130 1.936 1.663 1.356 0.942 0.942 0.942 0.942 0.942135 1.989 1.713 1.406 0.981 0.942 0.942 0.942 0.942140 2.042 1.764 1.455 1.034 0.942 0.942 0.942 0.942145 2.095 1.814 1.504 1.086 0.942 0.942 0.942 0.942150 2.148 1.865 1.554 1.138 0.942 0.942 0.942 0.942155 2.202 1.915 1.603 1.190 0.942 0.942 0.942 0.942160 2.255 1.965 1.652 1.243 0.942 0.942 0.942 0.942165 2.308 2.016 1.701 1.295 0.942 0.942 0.942 0.942170 2.361 2.066 1.751 1.347 0.942 0.942 0.942 0.942175 2.414 2.117 1.800 1.399 0.942 0.942 0.942 0.942180 2.468 2.167 1.849 1.451 0.942 0.942 0.942 0.942185 2.521 2.217 1.899 1.504 0.942 0.942 0.942 0.942190 2.574 2.268 1.948 1.556 0.942 0.942 0.942 0.942195 2.627 2.318 1.997 1.608 0.942 0.942 0.942 0.942200 2.680 2.368 2.047 1.660 0.942 0.942 0.942 0.942205 2.734 2.419 2.096 1.713 0.979 0.942 0.942 0.942210 2.787 2.469 2.145 1.765 1.039 0.942 0.942 0.942215 2.840 2.520 2.195 1.817 1.099 0.976 0.942 0.942220 2.893 2.570 2.244 1.869 1.159 1.033 0.942 0.942225 2.946 2.620 2.293 1.922 1.219 1.090 0.961 0.942230 3.000 2.671 2.343 1.974 1.279 1.148 1.016 0.942235 3.053 2.721 2.392 2.026 1.339 1.205 1.071 0.942240 3.106 2.772 2.441 2.078 1.398 1.262 1.126 0.942245 3.159 2.822 2.490 2.130 1.458 1.319 1.181 0.942250 3.212 2.872 2.540 2.183 1.518 1.376 1.236 0.942255 3.266 2.923 2.589 2.235 1.578 1.433 1.291 0.982260 3.319 2.973 2.638 2.287 1.638 1.491 1.346 1.034265 3.372 3.024 2.688 2.339 1.698 1.548 1.401 1.086270 3.425 3.074 2.737 2.392 1.757 1.605 1.456 1.138275 3.478 3.124 2.786 2.444 1.817 1.662 1.511 1.190280 3.531 3.175 2.836 2.496 1.877 1.719 1.566 1.242285 3.585 3.225 2.885 2.548 1.937 1.776 1.621 1.294290 3.638 3.276 2.934 2.600 1.997 1.834 1.676 1.346295 3.691 3.326 2.984 2.653 2.057 1.891 1.731 1.398300 3.744 3.376 3.033 2.705 2.117 1.948 1.786 1.450305 3.427 3.082 2.757 2.176 2.005 1.841 1.502310 3.477 3.132 2.809 2.236 2.062 1.896 1.554315 3.528 3.181 2.862 2.296 2.119 1.951 1.606320 3.578 3.230 2.914 2.356 2.177 2.006 1.658325 3.628 3.279 2.966 2.416 2.234 2.061 1.710330 3.679 3.329 3.018 2.476 2.291 2.116 1.762
I-Section Beams: 60 minutes
Section Factor up
to m-1
Thickness (mm) Required for a Design Temperature of
Steelmaster 120SB Table 2
Thickness is intumescent only. Beams with concrete slabs.
This certificate is the property of Exova (UK) Limited trading as Warrington Certification
Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429
CERTIFICATE No CF 5475 JOTUN ABU DHABI
Page 5 of 18 Signed E/140, AH/007 & AH/022
Issued: 7th October 2016 Valid to: 29th March 2021
400oC 450oC 500oC 550oC 600oC 620oC 650oC 700oC
30 1.159 1.065 0.958 0.942 0.942 0.942 0.942 0.94235 1.217 1.124 1.017 0.942 0.942 0.942 0.942 0.94240 1.275 1.182 1.076 0.942 0.942 0.942 0.942 0.94245 1.333 1.241 1.135 1.000 0.942 0.942 0.942 0.94250 1.391 1.300 1.195 1.061 0.942 0.942 0.942 0.94255 1.449 1.358 1.254 1.122 0.962 0.942 0.942 0.94260 1.507 1.417 1.313 1.183 1.024 0.944 0.942 0.94265 1.565 1.476 1.372 1.245 1.085 1.003 0.942 0.94270 1.623 1.534 1.431 1.306 1.147 1.063 0.946 0.94275 1.681 1.593 1.491 1.367 1.208 1.123 1.005 0.94280 1.739 1.651 1.550 1.428 1.270 1.183 1.064 0.94285 1.797 1.710 1.609 1.489 1.331 1.243 1.123 0.94290 1.855 1.769 1.668 1.550 1.392 1.303 1.183 0.94295 1.913 1.827 1.728 1.611 1.454 1.362 1.242 0.947100 1.971 1.886 1.787 1.672 1.515 1.422 1.301 1.006105 2.029 1.945 1.846 1.734 1.577 1.482 1.360 1.065110 2.087 2.003 1.905 1.795 1.638 1.542 1.420 1.124115 2.146 2.062 1.964 1.856 1.700 1.602 1.479 1.183120 2.204 2.120 2.024 1.917 1.761 1.662 1.538 1.241125 2.262 2.179 2.083 1.978 1.823 1.722 1.597 1.300130 2.320 2.238 2.142 2.039 1.884 1.781 1.657 1.359135 2.378 2.296 2.201 2.100 1.945 1.841 1.716 1.418140 2.436 2.355 2.261 2.161 2.007 1.901 1.775 1.477145 2.494 2.414 2.320 2.222 2.068 1.961 1.834 1.536150 2.552 2.472 2.379 2.284 2.130 2.021 1.893 1.595155 2.610 2.531 2.438 2.345 2.191 2.081 1.953 1.654160 2.668 2.589 2.498 2.406 2.253 2.140 2.012 1.713165 2.726 2.648 2.557 2.467 2.314 2.200 2.071 1.772170 2.784 2.707 2.616 2.528 2.376 2.260 2.130 1.831175 2.842 2.765 2.675 2.589 2.437 2.320 2.190 1.890180 2.900 2.824 2.734 2.650 2.498 2.380 2.249 1.949185 2.958 2.883 2.794 2.711 2.560 2.440 2.308 2.007190 3.016 2.941 2.853 2.772 2.621 2.500 2.367 2.066195 3.074 3.000 2.912 2.834 2.683 2.559 2.426 2.125200 3.132 3.058 2.971 2.895 2.744 2.619 2.486 2.184205 3.190 3.117 3.031 2.956 2.806 2.679 2.545 2.243210 3.248 3.176 3.090 3.017 2.867 2.739 2.604 2.302215 3.306 3.234 3.149 3.078 2.929 2.799 2.663 2.361220 3.364 3.293 3.208 3.139 2.990 2.859 2.723 2.420225 3.422 3.351 3.267 3.200 3.051 2.918 2.782 2.479230 3.480 3.410 3.327 3.261 3.113 2.978 2.841 2.538235 3.538 3.469 3.386 3.323 3.174 3.038 2.900 2.597240 3.596 3.527 3.445 3.384 3.236 3.098 2.959 2.656245 3.654 3.586 3.504 3.445 3.297 3.158 3.019 2.715250 3.712 3.645 3.564 3.506 3.359 3.218 3.078 2.773255 3.703 3.623 3.567 3.420 3.277 3.137 2.832260 3.682 3.628 3.482 3.337 3.196 2.891265 3.741 3.689 3.543 3.397 3.256 2.950270 3.750 3.604 3.457 3.315 3.009275 3.666 3.517 3.374 3.068280 3.727 3.577 3.433 3.127285 3.637 3.493 3.186290 3.696 3.552 3.245295 3.756 3.611 3.304300 3.670 3.363305 3.729 3.422310 3.481315 3.539320 3.598325 3.657330 3.716
I-Section Beams: 90 minutes
Section Factor up
to m-1
Thickness (mm) Required for a Design Temperature of
Steelmaster 120SB Table 3
Thickness is intumescent only. Beams with concrete slabs.
This certificate is the property of Exova (UK) Limited trading as Warrington Certification
Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429
CERTIFICATE No CF 5475 JOTUN ABU DHABI
Page 6 of 18 Signed E/140, AH/007 & AH/022
Issued: 7th October 2016 Valid to: 29th March 2021
400oC 450oC 500oC 550oC 600oC 620oC 650oC 700oC
30 1.159 1.159 1.159 0.974 0.942 0.94235 1.159 1.159 1.035 0.972 0.94240 1.159 1.097 1.034 0.94245 1.196 1.159 1.097 0.95450 1.258 1.221 1.159 1.01855 1.320 1.283 1.221 1.08260 1.383 1.344 1.284 1.14665 1.445 1.406 1.346 1.21070 1.507 1.468 1.409 1.27575 1.569 1.530 1.471 1.33980 1.631 1.591 1.534 1.40385 1.693 1.653 1.596 1.46790 1.755 1.715 1.659 1.53195 1.817 1.777 1.721 1.595100 1.879 1.839 1.783 1.660105 1.942 1.900 1.846 1.724110 2.004 1.962 1.908 1.788115 2.066 2.024 1.971 1.852120 2.128 2.086 2.033 1.916125 2.190 2.147 2.096 1.981130 2.252 2.209 2.158 2.045135 2.314 2.271 2.221 2.109140 2.376 2.333 2.283 2.173145 2.438 2.394 2.345 2.237150 2.501 2.456 2.408 2.302155 2.563 2.518 2.470 2.366160 2.625 2.580 2.533 2.430165 2.687 2.642 2.595 2.494170 2.749 2.703 2.658 2.558175 2.811 2.765 2.720 2.623180 2.873 2.827 2.783 2.687185 2.935 2.889 2.845 2.751190 2.997 2.950 2.907 2.815195 3.060 3.012 2.970 2.879200 3.122 3.074 3.032 2.943205 3.184 3.136 3.095 3.008210 3.246 3.198 3.157 3.072215 3.308 3.259 3.220 3.136220 3.370 3.321 3.282 3.200225 3.432 3.383 3.345 3.264230 3.494 3.445 3.407 3.329235 3.556 3.506 3.469 3.393240 3.618 3.568 3.532 3.457245 3.681 3.630 3.594 3.521250 3.743 3.692 3.657 3.585255 3.754 3.719 3.650260 3.714
I-Section Beams: 120 minutes
Section Factor up
to m-1
Thickness (mm) Required for a Design Temperature of
Steelmaster 120SB Table 4
Thickness is intumescent only. Beams with concrete slabs.
This certificate is the property of Exova (UK) Limited trading as Warrington Certification
Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429
CERTIFICATE No CF 5475 JOTUN ABU DHABI
Page 7 of 18 Signed E/140, AH/007 & AH/022
Issued: 7th October 2016 Valid to: 29th March 2021
400oC 450oC 500oC 550oC 600oC 650oC 700oC
30 0.942 0.942 0.942 0.942 0.942 0.942 0.94235 0.942 0.942 0.942 0.942 0.942 0.942 0.94240 0.942 0.942 0.942 0.942 0.942 0.942 0.94245 0.942 0.942 0.942 0.942 0.942 0.942 0.94250 0.942 0.942 0.942 0.942 0.942 0.942 0.94255 0.942 0.942 0.942 0.942 0.942 0.942 0.94260 0.942 0.942 0.942 0.942 0.942 0.942 0.94265 0.942 0.942 0.942 0.942 0.942 0.942 0.94270 0.942 0.942 0.942 0.942 0.942 0.942 0.94275 0.942 0.942 0.942 0.942 0.942 0.942 0.94280 0.942 0.942 0.942 0.942 0.942 0.942 0.94285 0.942 0.942 0.942 0.942 0.942 0.942 0.94290 0.942 0.942 0.942 0.942 0.942 0.942 0.94295 0.942 0.942 0.942 0.942 0.942 0.942 0.942100 0.942 0.942 0.942 0.942 0.942 0.942 0.942105 0.942 0.942 0.942 0.942 0.942 0.942 0.942110 0.942 0.942 0.942 0.942 0.942 0.942 0.942115 0.942 0.942 0.942 0.942 0.942 0.942 0.942120 0.942 0.942 0.942 0.942 0.942 0.942 0.942125 0.942 0.942 0.942 0.942 0.942 0.942 0.942130 0.942 0.942 0.942 0.942 0.942 0.942 0.942135 0.942 0.942 0.942 0.942 0.942 0.942 0.942140 0.942 0.942 0.942 0.942 0.942 0.942 0.942145 0.942 0.942 0.942 0.942 0.942 0.942 0.942150 0.942 0.942 0.942 0.942 0.942 0.942 0.942155 0.942 0.942 0.942 0.942 0.942 0.942 0.942160 0.942 0.942 0.942 0.942 0.942 0.942 0.942165 0.942 0.942 0.942 0.942 0.942 0.942 0.942170 0.942 0.942 0.942 0.942 0.942 0.942 0.942175 0.942 0.942 0.942 0.942 0.942 0.942 0.942180 0.942 0.942 0.942 0.942 0.942 0.942 0.942185 0.942 0.942 0.942 0.942 0.942 0.942 0.942190 0.942 0.942 0.942 0.942 0.942 0.942 0.942195 0.942 0.942 0.942 0.942 0.942 0.942 0.942200 0.942 0.942 0.942 0.942 0.942 0.942 0.942205 0.942 0.942 0.942 0.942 0.942 0.942 0.942210 0.942 0.942 0.942 0.942 0.942 0.942 0.942215 0.942 0.942 0.942 0.942 0.942 0.942 0.942220 0.942 0.942 0.942 0.942 0.942 0.942 0.942225 0.942 0.942 0.942 0.942 0.942 0.942 0.942230 0.942 0.942 0.942 0.942 0.942 0.942 0.942235 0.942 0.942 0.942 0.942 0.942 0.942 0.942240 0.942 0.942 0.942 0.942 0.942 0.942 0.942245 0.942 0.942 0.942 0.942 0.942 0.942 0.942250 0.942 0.942 0.942 0.942 0.942 0.942 0.942255 0.942 0.942 0.942 0.942 0.942 0.942 0.942260 0.942 0.942 0.942 0.942 0.942 0.942 0.942265 0.942 0.942 0.942 0.942 0.942 0.942 0.942270 0.942 0.942 0.942 0.942 0.942 0.942 0.942275 0.942 0.942 0.942 0.942 0.942 0.942 0.942280 0.942 0.942 0.942 0.942 0.942 0.942 0.942285 0.942 0.942 0.942 0.942 0.942 0.942 0.942290 0.942 0.942 0.942 0.942 0.942 0.942 0.942295 0.942 0.942 0.942 0.942 0.942 0.942 0.942300 0.942 0.942 0.942 0.942 0.942 0.942 0.942305 0.942 0.942 0.942 0.942 0.942 0.942 0.942310 0.942 0.942 0.942 0.942 0.942 0.942 0.942315 0.942 0.942 0.942 0.942 0.942 0.942 0.942320 0.942 0.942 0.942 0.942 0.942 0.942 0.942325 0.942 0.942 0.942 0.942 0.942 0.942 0.942330 0.942 0.942 0.942 0.942 0.942 0.942 0.942
Section Factor up
to m-1
I-Section Columns: 30 minutes
Thickness (mm) Required for a Design Temperature of
Steelmaster 120SB Table 5
Thickness is intumescent only. Table also applies to 4-sided I-section beams.
This certificate is the property of Exova (UK) Limited trading as Warrington Certification
Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429
CERTIFICATE No CF 5475 JOTUN ABU DHABI
Page 8 of 18 Signed E/140, AH/007 & AH/022
Issued: 7th October 2016 Valid to: 29th March 2021
400oC 450oC 500oC 550oC 600oC 650oC 700oC
30 0.942 0.942 0.942 0.942 0.942 0.942 0.94235 0.942 0.942 0.942 0.942 0.942 0.942 0.94240 0.985 0.942 0.942 0.942 0.942 0.942 0.94245 1.045 0.942 0.942 0.942 0.942 0.942 0.94250 1.104 0.942 0.942 0.942 0.942 0.942 0.94255 1.163 0.942 0.942 0.942 0.942 0.942 0.94260 1.223 0.971 0.942 0.942 0.942 0.942 0.94265 1.282 1.031 0.942 0.942 0.942 0.942 0.94270 1.342 1.091 0.942 0.942 0.942 0.942 0.94275 1.401 1.151 0.942 0.942 0.942 0.942 0.94280 1.460 1.211 0.942 0.942 0.942 0.942 0.94285 1.520 1.271 0.951 0.942 0.942 0.942 0.94290 1.579 1.331 1.013 0.942 0.942 0.942 0.94295 1.639 1.391 1.075 0.942 0.942 0.942 0.942100 1.698 1.451 1.137 0.942 0.942 0.942 0.942105 1.757 1.511 1.199 0.942 0.942 0.942 0.942110 1.817 1.570 1.260 0.942 0.942 0.942 0.942115 1.876 1.630 1.322 0.942 0.942 0.942 0.942120 1.936 1.690 1.384 0.942 0.942 0.942 0.942125 1.995 1.750 1.446 0.942 0.942 0.942 0.942130 2.054 1.810 1.508 0.944 0.942 0.942 0.942135 2.114 1.870 1.570 1.015 0.942 0.942 0.942140 2.173 1.930 1.631 1.085 0.942 0.942 0.942145 2.232 1.990 1.693 1.155 0.942 0.942 0.942150 2.292 2.050 1.755 1.225 0.942 0.942 0.942155 2.351 2.110 1.817 1.295 0.942 0.942 0.942160 2.411 2.170 1.879 1.365 0.942 0.942 0.942165 2.470 2.229 1.941 1.435 0.942 0.942 0.942170 2.529 2.289 2.002 1.506 0.942 0.942 0.942175 2.589 2.349 2.064 1.576 0.942 0.942 0.942180 2.648 2.409 2.126 1.646 0.942 0.942 0.942185 2.708 2.469 2.188 1.716 0.942 0.942 0.942190 2.767 2.529 2.250 1.786 0.942 0.942 0.942195 2.826 2.589 2.312 1.856 0.981 0.942 0.942200 2.886 2.649 2.373 1.927 1.069 0.942 0.942205 2.945 2.709 2.435 1.997 1.158 0.942 0.942210 3.004 2.769 2.497 2.067 1.246 0.942 0.942215 3.064 2.829 2.559 2.137 1.335 0.942 0.942220 3.123 2.889 2.621 2.207 1.423 0.942 0.942225 3.183 2.948 2.682 2.277 1.512 0.942 0.942230 3.242 3.008 2.744 2.348 1.600 0.942 0.942235 3.301 3.068 2.806 2.418 1.689 0.942 0.942240 3.361 3.128 2.868 2.488 1.777 0.942 0.942245 3.420 3.188 2.930 2.558 1.866 0.942 0.942250 3.480 3.248 2.992 2.628 1.954 0.942 0.942255 3.539 3.308 3.053 2.698 2.043 0.942 0.942260 3.598 3.368 3.115 2.768 2.131 0.942 0.942265 3.658 3.428 3.177 2.839 2.220 0.942 0.942270 3.717 3.488 3.239 2.909 2.308 0.942 0.942275 3.776 3.548 3.301 2.979 2.397 0.942 0.942280 3.836 3.607 3.363 3.049 2.485 0.942 0.942285 3.895 3.667 3.424 3.119 2.574 0.942 0.942290 3.955 3.727 3.486 3.189 2.662 0.942 0.942295 4.014 3.787 3.548 3.260 2.751 0.942 0.942300 4.073 3.847 3.610 3.330 2.839 0.942 0.942305 3.907 3.672 3.400 2.928 0.942 0.942310 3.967 3.734 3.470 3.016 0.942 0.942315 4.027 3.795 3.540 3.105 0.942 0.942320 4.087 3.857 3.610 3.193 0.942 0.942325 3.919 3.680 3.282 0.942 0.942330 3.981 3.751 3.370 0.999 0.942
Section Factor up
to m-1
I-Section Columns: 60 minutes
Thickness (mm) Required for a Design Temperature of
Steelmaster 120SB Table 6
Thickness is intumescent only. Table also applies to 4-sided I-section beams up to a maximum protection thickness of 3.760mm.
This certificate is the property of Exova (UK) Limited trading as Warrington Certification
Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429
CERTIFICATE No CF 5475 JOTUN ABU DHABI
Page 9 of 18 Signed E/140, AH/007 & AH/022
Issued: 7th October 2016 Valid to: 29th March 2021
400oC 450oC 500oC 550oC 600oC 650oC 700oC
30 1.211 1.089 0.954 0.942 0.942 0.942 0.94235 1.176 1.040 0.942 0.942 0.942 0.94240 1.263 1.125 0.973 0.942 0.942 0.94245 1.351 1.211 1.058 0.942 0.942 0.94250 1.438 1.297 1.143 0.942 0.942 0.94255 1.525 1.382 1.228 1.025 0.942 0.94260 1.613 1.468 1.313 1.109 0.942 0.94265 1.700 1.554 1.398 1.194 0.942 0.94270 1.788 1.639 1.484 1.279 1.005 0.94275 1.875 1.725 1.569 1.363 1.091 0.94280 1.962 1.811 1.654 1.448 1.177 0.94285 2.050 1.897 1.739 1.533 1.262 0.94290 2.137 1.982 1.824 1.617 1.348 0.94495 2.224 2.068 1.909 1.702 1.434 1.033100 2.312 2.154 1.994 1.786 1.520 1.122105 2.399 2.239 2.080 1.871 1.605 1.211110 2.486 2.325 2.165 1.956 1.691 1.300115 2.574 2.411 2.250 2.040 1.777 1.389120 2.661 2.496 2.335 2.125 1.862 1.478125 2.748 2.582 2.420 2.210 1.948 1.567130 2.836 2.668 2.505 2.294 2.034 1.656135 2.923 2.754 2.591 2.379 2.119 1.745140 3.011 2.839 2.676 2.463 2.205 1.835145 3.098 2.925 2.761 2.548 2.291 1.924150 3.185 3.011 2.846 2.633 2.376 2.013155 3.273 3.096 2.931 2.717 2.462 2.102160 3.360 3.182 3.016 2.802 2.548 2.191165 3.447 3.268 3.101 2.887 2.634 2.280170 3.535 3.353 3.187 2.971 2.719 2.369175 3.622 3.439 3.272 3.056 2.805 2.458180 3.709 3.525 3.357 3.140 2.891 2.547185 3.797 3.610 3.442 3.225 2.976 2.636190 3.884 3.696 3.527 3.310 3.062 2.725195 3.971 3.782 3.612 3.394 3.148 2.814200 4.059 3.868 3.698 3.479 3.233 2.904205 3.953 3.783 3.564 3.319 2.993210 4.039 3.868 3.648 3.405 3.082215 3.953 3.733 3.491 3.171220 4.038 3.817 3.576 3.260225 3.902 3.662 3.349230 3.987 3.748 3.438235 4.071 3.833 3.527240 3.919 3.616245 4.005 3.705250 4.090 3.794255 3.883260 3.972265 4.062
Section Factor up
to m-1
I-Section Columns: 90 minutes
Thickness (mm) Required for a Design Temperature of
Steelmaster 120SB Table 7
Thickness is intumescent only. Table also applies to 4-sided I-section beams up to a maximum protection thickness of 3.760mm.
This certificate is the property of Exova (UK) Limited trading as Warrington Certification
Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429
CERTIFICATE No CF 5475 JOTUN ABU DHABI
Page 10 of 18 Signed E/140, AH/007 & AH/022
Issued: 7th October 2016 Valid to: 29th March 2021
400oC 450oC 500oC 550oC 600oC 650oC 700oC
30 1.253 1.150 1.033 0.942 0.94235 1.359 1.251 1.132 0.976 0.94240 1.465 1.352 1.231 1.074 0.94245 1.571 1.454 1.330 1.172 0.97250 1.676 1.555 1.428 1.270 1.07255 1.782 1.656 1.527 1.368 1.17160 1.888 1.757 1.626 1.466 1.27165 1.994 1.858 1.725 1.564 1.37070 2.100 1.959 1.824 1.662 1.47075 2.205 2.060 1.923 1.760 1.56980 2.311 2.161 2.021 1.859 1.66985 2.417 2.262 2.120 1.957 1.76990 2.523 2.363 2.219 2.055 1.86895 2.628 2.464 2.318 2.153 1.968100 2.734 2.565 2.417 2.251 2.067105 2.840 2.666 2.516 2.349 2.167110 2.946 2.767 2.614 2.447 2.266115 3.052 2.868 2.713 2.545 2.366120 3.157 2.969 2.812 2.643 2.465125 3.263 3.070 2.911 2.742 2.565130 3.369 3.171 3.010 2.840 2.665135 3.475 3.272 3.109 2.938 2.764140 3.581 3.373 3.207 3.036 2.864145 3.686 3.474 3.306 3.134 2.963150 3.792 3.575 3.405 3.232 3.063155 3.898 3.676 3.504 3.330 3.162160 4.004 3.778 3.603 3.428 3.262165 3.879 3.702 3.527 3.361170 3.980 3.800 3.625 3.461175 4.081 3.899 3.723 3.561180 3.998 3.821 3.660185 4.097 3.919 3.760190 4.017 3.859195 3.959200 4.058
Section Factor up
to m-1
I-Section Columns: 120 minutes
Thickness (mm) Required for a Design Temperature of
Steelmaster 120SB Table 8
Thickness is intumescent only. Table also applies to 4-sided I-section beams Table also applies to 4-sided I-section beams up to a maximum protection thickness of 3.760mm.
This certificate is the property of Exova (UK) Limited trading as Warrington Certification
Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429
CERTIFICATE No CF 5475 JOTUN ABU DHABI
Page 11 of 18 Signed E/140, AH/007 & AH/022
Issued: 7th October 2016 Valid to: 29th March 2021
400oC 450oC 500oC 520oC 550oC 600oC 650oC 700oC
30 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.00735 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.00740 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.00745 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.00750 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.00755 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.00760 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.00765 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.00770 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.00775 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.00780 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.00785 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.00790 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.00795 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007100 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007105 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007110 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007115 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007120 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007125 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007130 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007135 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007140 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007145 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007150 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007155 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007160 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007165 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007170 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007175 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007180 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007185 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007190 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007195 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007200 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007205 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007210 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007215 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007220 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
Rectangular Hollow Columns: 30 minutes
Section Factor up
to m-1
Thickness (mm) Required for a Design Temperature of
Steelmaster 120SB Table 9
Thickness is intumescent only.
This certificate is the property of Exova (UK) Limited trading as Warrington Certification
Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429
CERTIFICATE No CF 5475 JOTUN ABU DHABI
Page 12 of 18 Signed E/140, AH/007 & AH/022
Issued: 7th October 2016 Valid to: 29th March 2021
400oC 450oC 500oC 520oC 550oC 600oC 650oC 700oC
30 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.00735 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.00740 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.00745 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.00750 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.00755 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.00760 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.00765 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.00770 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.00775 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.00780 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.00785 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.00790 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.00795 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007100 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007105 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007110 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007115 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007120 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007125 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007130 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007135 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007140 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007145 3.027 3.007 3.007 3.007 3.007 3.007 3.007 3.007150 3.143 3.007 3.007 3.007 3.007 3.007 3.007 3.007155 3.259 3.007 3.007 3.007 3.007 3.007 3.007 3.007160 3.376 3.007 3.007 3.007 3.007 3.007 3.007 3.007165 3.492 3.007 3.007 3.007 3.007 3.007 3.007 3.007170 3.608 3.007 3.007 3.007 3.007 3.007 3.007 3.007175 3.725 3.007 3.007 3.007 3.007 3.007 3.007 3.007180 3.841 3.007 3.007 3.007 3.007 3.007 3.007 3.007185 3.957 3.007 3.007 3.007 3.007 3.007 3.007 3.007190 4.073 3.007 3.007 3.007 3.007 3.007 3.007 3.007195 4.190 3.091 3.007 3.007 3.007 3.007 3.007 3.007200 4.306 3.220 3.007 3.007 3.007 3.007 3.007 3.007205 4.422 3.348 3.007 3.007 3.007 3.007 3.007 3.007210 4.539 3.476 3.007 3.007 3.007 3.007 3.007 3.007215 4.655 3.604 3.252 3.018 3.007 3.007 3.007 3.007220 3.732 3.399 3.137 3.009 3.007 3.007 3.007
Rectangular Hollow Columns: 60 minutes
Thickness (mm) Required for a Design Temperature of Section Factor up
to m-1
Steelmaster 120SB Table 10
Thickness is intumescent only.
This certificate is the property of Exova (UK) Limited trading as Warrington Certification
Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429
CERTIFICATE No CF 5475 JOTUN ABU DHABI
Page 13 of 18 Signed E/140, AH/007 & AH/022
Issued: 7th October 2016 Valid to: 29th March 2021
400oC 450oC 500oC 520oC 550oC 600oC 650oC 700oC
30 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.00735 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.00740 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.00745 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.00750 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.00755 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.00760 3.149 3.007 3.007 3.007 3.007 3.007 3.007 3.00765 3.566 3.007 3.007 3.007 3.007 3.007 3.007 3.00770 3.982 3.007 3.007 3.007 3.007 3.007 3.007 3.00775 4.399 3.232 3.007 3.007 3.007 3.007 3.007 3.00780 3.649 3.007 3.007 3.007 3.007 3.007 3.00785 4.066 3.132 3.007 3.007 3.007 3.007 3.00790 4.482 3.466 3.007 3.007 3.007 3.007 3.00795 3.799 3.245 3.007 3.007 3.007 3.007100 4.132 3.630 3.149 3.007 3.007 3.007105 4.466 4.014 3.462 3.007 3.007 3.007110 4.399 3.774 3.007 3.007 3.007115 4.087 3.007 3.007 3.007120 4.399 3.249 3.007 3.007125 3.499 3.007 3.007130 3.749 3.007 3.007135 3.999 3.018 3.007140 4.249 3.256 3.007145 4.499 3.494 3.007150 3.732 3.007155 3.970 3.007160 4.209 3.126165 4.447 3.354170 3.581175 3.808180 4.035185 4.263190 4.490195
Rectangular Hollow Columns: 90 minutes
Section Factor up
to m-1
Thickness (mm) Required for a Design Temperature of
Steelmaster 120SB Table 11
Thickness is intumescent only.
This certificate is the property of Exova (UK) Limited trading as Warrington Certification
Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429
CERTIFICATE No CF 5475 JOTUN ABU DHABI
Page 14 of 18 Signed E/140, AH/007 & AH/022
Issued: 7th October 2016 Valid to: 29th March 2021
Steelmaster 120SB Table 12
Thickness is intumescent only.
400oC 450oC 500oC 520oC 550oC 600oC 650oC 700oC
30 3.399 3.007 3.007 3.007 3.007 3.007 3.00735 3.399 3.007 3.007 3.007 3.007 3.007 3.00740 3.399 3.007 3.007 3.007 3.007 3.007 3.00745 3.399 3.007 3.007 3.007 3.007 3.007 3.00750 3.007 3.007 3.007 3.007 3.007 3.00755 3.599 3.007 3.007 3.007 3.007 3.00760 4.599 3.999 3.232 3.007 3.007 3.00765 4.066 3.007 3.007 3.00770 3.199 3.007 3.00775 4.199 3.007 3.00780 3.399 3.00785 4.232 3.00790 3.14995 3.774100 4.399
Rectangular Hollow Columns: 120 minutes
Section Factor up
to m-1
Thickness (mm) Required for a Design Temperature of
This certificate is the property of Exova (UK) Limited trading as Warrington Certification
Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429
CERTIFICATE No CF 5475 JOTUN ABU DHABI
Page 15 of 18 Signed E/140, AH/007 & AH/022
Issued: 7th October 2016 Valid to: 29th March 2021
400oC 450oC 500oC 520oC 550oC 600oC 650oC 700oC
30 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.11235 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.11240 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.11245 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.11250 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.11255 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.11260 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.11265 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.11270 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.11275 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.11280 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.11285 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.11290 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.11295 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.112100 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.112105 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.112110 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.112115 2.127 2.112 2.112 2.112 2.112 2.112 2.112 2.112120 2.152 2.112 2.112 2.112 2.112 2.112 2.112 2.112125 2.177 2.112 2.112 2.112 2.112 2.112 2.112 2.112130 2.202 2.112 2.112 2.112 2.112 2.112 2.112 2.112135 2.227 2.112 2.112 2.112 2.112 2.112 2.112 2.112140 2.252 2.132 2.112 2.112 2.112 2.112 2.112 2.112145 2.277 2.156 2.112 2.112 2.112 2.112 2.112 2.112150 2.302 2.179 2.112 2.112 2.112 2.112 2.112 2.112155 2.327 2.202 2.112 2.112 2.112 2.112 2.112 2.112160 2.352 2.226 2.112 2.112 2.112 2.112 2.112 2.112165 2.377 2.249 2.112 2.112 2.112 2.112 2.112 2.112170 2.402 2.272 2.116 2.116 2.112 2.112 2.112 2.112175 2.427 2.296 2.137 2.137 2.112 2.112 2.112 2.112180 2.452 2.319 2.158 2.158 2.112 2.112 2.112 2.112185 2.477 2.342 2.179 2.179 2.126 2.112 2.112 2.112190 2.502 2.366 2.200 2.200 2.145 2.112 2.112 2.112195 2.527 2.389 2.221 2.221 2.165 2.112 2.112 2.112200 2.552 2.412 2.242 2.242 2.185 2.112 2.112 2.112205 2.577 2.436 2.263 2.263 2.205 2.112 2.112 2.112210 2.602 2.459 2.284 2.284 2.224 2.126 2.112 2.112215 2.627 2.482 2.305 2.305 2.244 2.144 2.112 2.112220 2.652 2.506 2.326 2.326 2.264 2.162 2.112 2.112
Circular Hollow Columns: 30 minutes
Section Factor up
to m-1
Thickness (mm) Required for a Design Temperature of
Steelmaster 120SB Table 13
Thickness is intumescent only.
This certificate is the property of Exova (UK) Limited trading as Warrington Certification
Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429
CERTIFICATE No CF 5475 JOTUN ABU DHABI
Page 16 of 18 Signed E/140, AH/007 & AH/022
Issued: 7th October 2016 Valid to: 29th March 2021
400oC 450oC 500oC 520oC 550oC 600oC 650oC 700oC
30 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.11235 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.11240 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.11245 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.11250 2.170 2.112 2.112 2.112 2.112 2.112 2.112 2.11255 2.233 2.126 2.112 2.112 2.112 2.112 2.112 2.11260 2.296 2.184 2.112 2.112 2.112 2.112 2.112 2.11265 2.360 2.242 2.112 2.112 2.112 2.112 2.112 2.11270 2.423 2.300 2.139 2.139 2.112 2.112 2.112 2.11275 2.486 2.359 2.191 2.191 2.140 2.112 2.112 2.11280 2.550 2.417 2.243 2.243 2.189 2.112 2.112 2.11285 2.613 2.475 2.295 2.295 2.239 2.135 2.112 2.11290 2.676 2.534 2.347 2.347 2.288 2.181 2.112 2.11295 2.739 2.592 2.399 2.399 2.337 2.227 2.123 2.112100 2.803 2.650 2.451 2.451 2.386 2.273 2.166 2.112105 2.866 2.708 2.503 2.503 2.436 2.319 2.209 2.112110 2.929 2.767 2.555 2.555 2.485 2.365 2.252 2.139115 2.993 2.825 2.608 2.608 2.534 2.412 2.295 2.179120 3.056 2.883 2.660 2.660 2.583 2.458 2.338 2.219125 3.119 2.942 2.712 2.712 2.632 2.504 2.381 2.259130 3.182 3.000 2.764 2.764 2.682 2.550 2.424 2.299135 3.239 3.058 2.816 2.816 2.731 2.596 2.467 2.339140 3.268 3.116 2.868 2.868 2.780 2.642 2.510 2.379145 3.297 3.175 2.920 2.920 2.829 2.688 2.553 2.419150 3.327 3.233 2.972 2.972 2.879 2.735 2.596 2.459155 3.356 3.261 3.025 3.025 2.928 2.781 2.639 2.499160 3.385 3.288 3.077 3.077 2.977 2.827 2.682 2.539165 3.414 3.316 3.129 3.129 3.026 2.873 2.725 2.578170 3.444 3.344 3.181 3.181 3.075 2.919 2.768 2.618175 3.473 3.371 3.233 3.233 3.125 2.965 2.812 2.658180 3.502 3.399 3.259 3.259 3.174 3.012 2.855 2.698185 3.532 3.426 3.286 3.286 3.223 3.058 2.898 2.738190 3.561 3.454 3.312 3.312 3.253 3.104 2.941 2.778195 3.590 3.482 3.339 3.339 3.278 3.150 2.984 2.818200 3.619 3.509 3.365 3.365 3.303 3.196 3.027 2.858205 3.649 3.537 3.391 3.391 3.328 3.238 3.070 2.898210 3.678 3.565 3.418 3.418 3.353 3.261 3.113 2.938215 3.707 3.592 3.444 3.444 3.378 3.285 3.156 2.978220 3.736 3.620 3.471 3.471 3.404 3.308 3.199 3.017
Section Factor up
to m-1
Circular Hollow Columns: 60 minutes
Thickness (mm) Required for a Design Temperature of
Steelmaster 120SB Table 14
Thickness is intumescent only.
This certificate is the property of Exova (UK) Limited trading as Warrington Certification
Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429
CERTIFICATE No CF 5475 JOTUN ABU DHABI
Page 17 of 18 Signed E/140, AH/007 & AH/022
Issued: 7th October 2016 Valid to: 29th March 2021
400oC 450oC 500oC 520oC 550oC 600oC 650oC 700oC
30 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.11235 3.558 2.112 2.112 2.112 2.112 2.112 2.112 2.11240 3.558 2.112 2.112 2.112 2.112 2.112 2.112 2.11245 3.558 2.249 2.112 2.112 2.112 2.112 2.112 2.11250 3.558 2.741 2.112 2.112 2.112 2.112 2.112 2.11255 3.558 3.233 2.410 2.303 2.213 2.155 2.112 2.11260 3.671 3.329 2.727 2.524 2.347 2.229 2.143 2.11265 3.785 3.426 3.043 2.746 2.481 2.303 2.211 2.11270 3.898 3.522 3.257 2.967 2.615 2.377 2.279 2.15475 4.012 3.618 3.317 3.189 2.750 2.450 2.347 2.21980 4.125 3.714 3.376 3.278 2.884 2.524 2.415 2.28385 4.238 3.811 3.436 3.334 3.018 2.598 2.483 2.34790 4.352 3.904 3.496 3.391 3.152 2.672 2.551 2.41195 4.465 3.996 3.555 3.447 3.251 2.746 2.620 2.475100 4.579 4.088 3.615 3.503 3.294 2.820 2.688 2.540105 4.692 4.180 3.675 3.560 3.338 2.893 2.756 2.604110 4.806 4.273 3.734 3.616 3.382 2.967 2.824 2.668115 4.919 4.365 3.794 3.672 3.426 3.041 2.892 2.732120 5.033 4.457 3.875 3.729 3.470 3.115 2.960 2.796125 5.146 4.549 3.989 3.785 3.514 3.189 3.029 2.861130 5.260 4.641 4.102 3.852 3.558 3.248 3.097 2.925135 5.373 4.733 4.216 3.962 3.602 3.286 3.165 2.989140 5.487 4.826 4.329 4.072 3.646 3.324 3.233 3.053145 5.600 4.918 4.443 4.182 3.690 3.361 3.267 3.117150 5.713 5.010 4.556 4.292 3.733 3.399 3.302 3.182155 5.102 4.670 4.402 3.777 3.437 3.336 3.239160 5.194 4.783 4.512 3.821 3.475 3.370 3.271165 5.287 4.897 4.623 3.958 3.513 3.405 3.303170 5.379 5.010 4.733 4.119 3.550 3.439 3.335175 5.471 5.123 4.843 4.279 3.588 3.473 3.366180 5.563 5.237 4.953 4.439 3.626 3.507 3.398185 5.655 5.350 5.063 4.600 3.664 3.542 3.430190 5.748 5.464 5.173 4.760 3.702 3.576 3.462195 5.577 5.283 4.920 3.739 3.610 3.493200 5.691 5.393 5.081 3.777 3.645 3.525205 5.503 5.241 3.815 3.679 3.557210 5.613 5.401 4.000 3.713 3.589215 5.723 5.562 4.284 3.748 3.620220 5.722 4.568 3.782 3.652
Circular Hollow Columns: 90 minutes
Section Factor up
to m-1
Thickness (mm) Required for a Design Temperature of
Steelmaster 120SB Table 15
Thickness is intumescent only.
This certificate is the property of Exova (UK) Limited trading as Warrington Certification
Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429
CERTIFICATE No CF 5475 JOTUN ABU DHABI
Page 18 of 18 Signed E/140, AH/007 & AH/022
Issued: 7th October 2016 Valid to: 29th March 2021
400oC 450oC 500oC 520oC 550oC 600oC 650oC 700oC
30 5.305 5.305 2.227 2.112 2.112 2.112 2.11235 5.305 5.305 2.547 2.178 2.112 2.112 2.11240 5.305 5.305 2.868 2.473 2.112 2.112 2.11245 5.305 5.305 3.189 2.768 2.310 2.112 2.11250 5.305 5.305 3.509 3.063 2.534 2.112 2.11255 5.305 5.305 3.830 3.358 2.757 2.347 2.11260 5.305 4.151 3.653 2.981 2.508 2.24365 5.305 4.471 3.948 3.204 2.669 2.50370 5.305 4.792 4.243 3.428 2.831 2.76475 5.113 4.538 3.651 2.992 2.90080 5.433 4.833 3.875 3.153 3.10085 5.754 5.128 4.098 3.314 3.30290 5.423 4.322 3.475 3.35995 5.718 4.545 3.637 3.417100 4.769 3.798 3.474105 4.992 3.946 3.532110 5.216 4.090 3.589115 5.439 4.235 3.646120 5.663 4.380 3.704125 4.524 3.761130 4.669 3.819135 4.813 3.953140 4.958 4.107145 5.103 4.260150 5.247 4.414155 5.392 4.568160 5.536 4.721165 5.681 4.875170 5.028175 5.182180 5.336185 5.489190 5.643195200205210215220
Circular Hollow Columns: 120 minutes
Section Factor up
to m-1
Thickness (mm) Required for a Design Temperature of
Steelmaster 120SB Table 16
Thickness is intumescent only
top related