certificate - abb ltd · 2018-05-10 · annex to kema-keur certificate 2198657.01 page 1 of 1 dekra...
Post on 25-Feb-2020
5 Views
Preview:
TRANSCRIPT
DEKRA Certification B.V.
2 <drs. G.J. Zoetbrood H.R.M. BarendsManaging Director Certification Manager
© Integral publication of this certificate is allowed
ACCREDITED BY THEDUTCH ACCREDITATIONCOUNCIL
DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem The NetherlandsT +31 88 96 83000 F +31 88 96 83100 www.dekra-certification.com Registered Arnhem 09085396
CERTIFICATE
Issued to:Applicant: Manufacturer/Licensee:ABB B.V.Frankeneng 156716 AA EdeThe Netherlands
ABB B.V.Frankeneng 156716 AA EdeThe Netherlands
Product : Connecting box for fixed electrical installationsTrade name : ABBType : HW52-F
The product and any acceptable variation thereto is specified in the Annex to this certificate and the documents therein referred to.
DEKRA hereby declares that the above-mentioned product has been certified on the basis of: a type test according to the NEN-EN-IEC 60670-1:2005 and NEN-EN-IEC 60670-22:2007 an inspection of the production location according to CENELEC Operational Document CIG 021 a certification agreement with the number 900017
DEKRA hereby grants the right to use the KEMA-KEUR certification mark.
The KEMA-KEUR certification mark may be applied to the product as specified in this certificate for the duration of the KEMA-KEUR certification agreement and under the conditions of the KEMA-KEURcertification agreement.
This certificate is issued on: 1 March 2017 and expires upon withdrawal of one of the above mentioned standards.
Certificate number: 2198657.01
ANNEX TO KEMA-KEUR CERTIFICATE 2198657.01 page 1 of 1
DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem The NetherlandsT +31 88 96 83000 F +31 88 96 83100 www.dekra-certification.com Registered Arnhem 09085396
SPECIFICATION OF THE CERTIFIED PRODUCT
Product dataproduct : Connecting box for fixed electrical installationstrade name : ABBtype : HW52-Fratings : 16A/ 250V~model : Single box with fixraps and suitable for double inlet spout inserts 16/19mmmaterial : Thermoplasticdimensions : 65x65x50mm
TESTS
Test requirementsNEN-EN-IEC 60670-1:2005NEN-EN-IEC 60670-22:2007
Test resultThe test results are laid down in DEKRA test file 2198657.01.
ConclusionThe examination proved that all test requirements were met.
Tested by : R. van DaalenChecked by : R. Rosbag
Factory locationABB B.V.Frankeneng 15, 6716 AA EdeThe Netherlands
F{
top related