catalog asa cons 2014 s
Post on 02-Jun-2018
242 Views
Preview:
TRANSCRIPT
-
8/10/2019 Catalog ASA CONS 2014 s
1/100
b
a
c
3%
peste 500 structuri prefabricatepeste 300.000 m 3 de beton prefabricat
peste 3.000.000 m2
construiiover 500 precast structures
over 300,000 m 3 precast concreteover 3,000,000 m 2 built
Prefabricate din beton armat i precomprimatReinforced and prestressed concrete elements
-
8/10/2019 Catalog ASA CONS 2014 s
2/100
-
8/10/2019 Catalog ASA CONS 2014 s
3/1003
Prezentarea companiei / About the company
ISTORICASA CONS ROMNIA SRL a luat fiin n anul 1999 ca parte aGrupului ASA Kft. Ungaria, devenind n scurt timp liderul pieeiromneti n domeniul prefabricatelor din beton armat pen-
tru construcii nerezideniale. n decursul anilor ASA CONS aacumulat o experien considerabil n construcia de centrecomerciale i logistice, depozite, lucrri de infrastructur, con-strucii industriale i civile.
n 2008 ASA CONS devine parte a Grupului Consolis, lider eu-ropean n livrarea soluiilor n domeniul construciilor, lucr-rilor civile i infrastructurii feroviare, specializat n produciaelementelor din beton cu performane nalte. Cu aproximativ10.000 de angajai care opereaz n 30 de ri din ntreagalume, n special n Europa i regiunea mediteranean, Grupula generat venituri de 1,3 miliarde Euro n 2013. Inovaia areun rol central n activitatea Consolis. Grupul dezvolt conti-nuu materiale, produse i procese de producie inovatoare cuscopul mbuntirii eficienei i calitii. Cu peste 100 de anide experien, Grupul Consolis a devenit sinonim cu soluiileinovatoare de ultim generaie.
Intrarea n Consolis a nsemnat pentru ASA CONS un pas marespre viitor, acces la tehnologii de vrf i o infuzie de know-howde la cei mai buni specialiti n domeniu.
EVOLUIA N CIFRE/INVESTIIICreterea investiiilor n domeniu, precum i dotrile cu utilajei echipamente moderne, au dus la creterea produciei i a
capacitii de montaj. n 2008 acestea au atins cifre record:40.000 m3 de beton prefabricat, iar cifra de afaceri a depit40 milioane Euro. Pn n prezent, ASA CONS a executat peste500 structuri prefabricate pentru construcii civile i indus-triale, care nsumeaz peste300.000 m3 de beton prefabri-cat, echivalnd aproximativ3.000.000 m2 construii.
ASIGURAREA CALITIICalitatea materialelor i a produselor finite este o preocuparepermanent a companiei. Se verific n permanen calitateabetoanelor puse n oper la realizarea elementelor prefabri-cate. Elementele prefabricate executate au certificate de con-
formitate, obinute n urma testelor realizate n laboratorulpropriu, laborator de grad II, dotat cu aparatur necesar efec-turii acestor ncercri.
HISTORY ASA CONS ROMANIA SRL was founded in 1999 as part of thegroup ASA Kft. Hungary and has quickly become the marketleader in precast concrete for non residential buildings in Ro-
mania. ASA CONS built an impressive track record over theyears, including commercial and logistic centers, warehouses,infrastructure, civil and industrial buildings.
In 2008 ASA CONS became part of Consolis Group, a leadingEuropean Group in building solutions, civil works and rail in-
frastructure, specialized in manufacturing high-performanceconcrete building elements. With around 10,000 employeesoperating in 30 countries throughout the world, mostly in Eu-rope and the Mediterranean region, the Group generated 1.3billion in revenue in 2013. Innovation plays a central role inConsolis activities. The Group is continually developing newand innovative materials, products and manufacturing pro-cesses in order to improve productivity and quality. With over100 years of experience Consolis Group has become synony-mous with latest generation innovative solutions.
Joining Consolis Group meant for ASA CONS a big step in the future, access to cutting-edge technology and know-how infu-sion from the best specialists in the field.
FACTS AND FIGURES/INVESTMENTSThe company has consistently made investments in its equip-ment, leading to an increased production and assembly ca-
pacity. In 2008, record numbers were achieved: 40,000 m 3 of
precast concrete and an annual turnover of over 40 million. Todate, ASA CONS has produced over 500 precast structures forcivil and industrial projects, totalling more than 300,000 m 3 of precast concrete , for a total of about 3,000,000 m 2 built .
QUALITY ASSURANCE The quality of materials and finished products is an ongoing
priority for the company, who is constantly assessing the qual-ity of the concrete used for precast elements. The precast el-ements hold certificates of compliance, obtained from testsconducted in our Grade II laboratory, well equipped for suchtests.
ASA CONSs management is focused on the quality of productsand services, aiming daily to exceed the standards to which the
Anul nfiinrii /Founding year : 1999Intrarea n Consolis / Joined Consolis : 2008
-
8/10/2019 Catalog ASA CONS 2014 s
4/1004
company is certified: ISO 9001:2008 for quality, ISO 14001: 2004 for environment and OHSAS 18001: 2007 for healthand safety.
GRADE 2 LABORATORY
ASA CONSs grade 2 laboratory is authorized by State Inspec-torate in Constructions and functions under reference standardSR EN ISO / IEC 17025. The laboratory is equipped with allnecessary equipment and follows environmental conditionsspecified in European standards. This certification authorizesus to conduct determinations both for own products, as wellas for third parties , for the following profiles:
1. BBABP Concrete, reinforced and prestressed concrete Making concrete specimens Preservation samples - tests for hardened concrete Bulk density - tests for hardened concrete
Bulk density of fresh concrete granularity aggregates con-tained in the concrete mix
Preliminary tests Workability (consistency) Compressive strength - tests for hardened concrete Temperature - tests for fresh concrete Setting time - fresh concrete testing
2. M.B.M. Materials for concrete and mortar The appearance and shape of granules - tests for natural
river aggregates Humus content Grading curve. Grading analysis by sieve tests Dry and wet bulk density Determination of bulk density. Tests for aggregates
Prezentarea companiei / About the company
Managementul ASA CONS acord o atenie deosebit calit-ii produselor i serviciilor oferite, urmrind zilnic depireastandardelor asumate prin certificarea sistemelor de manage-ment al calitiiISO 9001:2008, de mediuISO 14001: 2004 i al sntii i securitii n muncOHSAS 18001:2007.
LABORATOR DE GRAD II
Laboratorul de gradul II al ASA CONS este autorizat de ctreInspectoratul de Stat n Construcii i funcioneaz conformstandardului de referin SR EN ISO/CEI 17025, fiind dotat cuechipamentele necesare i respectnd condiiile de mediu pre-cizate n standardele europene. Aceast certificare ne autori-zeaz s efectum determinriatt pentru propriile produse,ct i pentru teri, pentru urmtoarele profile:
1. BBABP beton, beton armat i beton precomprimat Confecionare epruvete beton Conservare probe ncercri pentru beton ntrit Densitate aparent - ncercri pentru beton ntrit Densitate aparent a betoanelor n stare proaspt Granulozitatea agregatelor coninute n amestecul de beton ncercri preliminare Lucrabilitatea (consistena) Rezistena la compresiune ncercri pentru beton ntrit Temperatura ncercri pentru beton proaspt Timp de priz ncercri pentru beton proaspt
2. M.B.M. Materiale pentru betoane i mortare Aspectul i forma granulelor ncercri pentru agregate na-
turale, de ru Coninut de humus
Curba granulometric. Analiza granulometric prin cernere Densitatea n grmad n stare uscat i n stare de umidi-tate natural
-
8/10/2019 Catalog ASA CONS 2014 s
5/1005
Additive solution density Floating particles in aggregates Cements strength: 2 days, 7 days, 28 days Cement stability (volume constant). Tests for cement Conservation status - tests for cement Setting time for cement
Aggregates humidity Average values b/a and c/a of granules with dmin> 7.1 mm Organoleptic testing
The testing are performed to improve the quality of services ,in accordance with documented procedures and requirementsset by our customers. No deviations are accepted and preven-tive measures are taken to eliminate non-quality, along theidentification and registration of all non-compliances relatedto quality and achievement of corrective and preventive ac-tions.
Processes covered: Collecting Preservation of samples Identifying samples Sampling Technical process procedures - specific to each type of test Registration
Advantages of grade 2 laboratory ASA CONS: Professional and experienced staff, licensed by the Inspec-
torate State in Construction Tests performed according to European standards Certificate issuance, recognized in the field as the test report Develop cumulative bulletin paper Preparation and verification of concrete recipes Specialized technical assistance for improving recipes
COMPLETE SERVICES ASA CONS is aone-stop-shop partner , supplier of high qual-ity products and customized services. The company offers avariety of products for precast concrete structures: foundationelements, intermediate floor elements, precast roof, wall pan-els and columns, as well as infrastructure solutions: beams,culvert elements, soundproof panels.
Determinarea masei volumice n vrac. ncercri pentru agre-gate
Densitatea soluiei de aditivi Pri levigabile din agregate Rezistene mecanice la cimenturi: la 2 zile, 7 zile, 28 zile Stabilitatea cimentului (constan de volum). ncercri pen-
tru ciment Starea de conservare ncercri pentru ciment Timpul de priz al cimentului Umiditatea agregatelor Valori medii b/a i c/a ale granulelor cu dmin> 7.1 mm Verificarea organoleptic
ncercrile sunt efectuate cu scopul mbuntirii calitiiserviciilor, conform procedurilor documentate stabilite i ce-rinelor clienilor, neadmindu-se abateri de la acestea i lu-ndu-se msuri pentru prevenirea non-calitii, identificarea i nregistrarea tuturor neconformitilor referitoare la calitate irealizarea aciunilor corective i preventive.
Procese reglementate: Recoltare Pstrarea probelor Identificarea probelor Eantionare Proceduri Tehnice de Proces specifice pentru fiecare tip
de ncercri nregistrare
Avantajele laboratorului de grad II ASA CONS: Personal de specialitate, cu experien, autorizat de Inspec-
toratul de Stat n Construcii ncercri efectuate conform standardelor europene Emiterea documentelor de atestare, recunoscute n dome-
niu, sub forma raportului de ncercare Elaborarea buletinelor cumulative pe lucrare ntocmirea i verificarea reetelor de beton Asisten tehnic de specialitate pentru mbuntirea re-
etelor
SERVICII COMPLETEASA CONS este unpartener complet, un furnizor de produsecalitative i servicii adaptate cererilor fiecrui client. Compania
v ofer pentru structurile prefabricate din beton armat: ele-mente de fundare, elemente de planeu intermediar, elementeprefabricate de acoperi, panouri i stlpi, precum i soluii ninfrastructur: grinzi de pod, elemente de podee, panouri fo-noabsorbante.
Prezentarea companiei / About the company
-
8/10/2019 Catalog ASA CONS 2014 s
6/1006
ASA CONS producegama complet de elemente din beton
armat i precomprimat, oferind n acelai timp i servicii-le adiacente pe care le implic ridicarea unei structuri, de lacentre comerciale sau logistice la construcii industriale saupoduri.
AVANTAJELE PRODUSELOR ASA CONS:- toate produsele noastre respect ntru totul standardele ilegislaia n domeniu privind: rezistena n timp, rezistena lafoc, rezistena la factorii de mediu
- ncorporeaz materie prim de cea mai bun calitate i teh-nologie performant
- fabricarea elementelor presupune o serie de procese rigurosdefinite astfel nct produsul finit va corespunde celor maimari pretenii de calitate
- elementele prefabricate executate sunt verificate n laborato-rul propriu; n urma acestei verificri se emite certificatul deconformitate al produsului
AVANTAJELE CLIENILOR ASA CONS:- one stop shop- garania final a lucrrii- timp redus de la proiectare la execuie i montaj; posibili-tatea avansrii construciei pe timp de iarn, pn la -20C
- costuri mai mici dect o construcie clasic- evitarea problemelor cu intermediarii, ntruct echipele noas-
tre de montaj pun n oper elemente deja cunoscute, produseconform acelorai standarde de calitate, n mod tradiional
PROIECTAREPrimul pas n crearea elementelor prefabricate l reprezintproiectarea corect a acestora. Echipa de proiectani preia in-formaiile de la beneficiarul final i le transform n planuriconcrete, astfel nct produsul finit s corespund pe deplinnevoilor clienilor notri. Aceast echip includeprofesioniticu experiena necesar prentmpinrii oricror potenialepiedici n ridicarea efectiv a structurilor din prefabricate. Pu-nem la dispoziia beneficiarilorconsultan de specialitate ndomeniu.
ASA CONS manufactures and provides the full range of rein- forced and prestressed concrete elements , as well as the
services related to raising a structure, from commercial anddistribution centres to industrial buildings and bridges.
ASA CONS PRODUCT BENEFITS:- All our products fully comply with standards and legislation
on: resistance over time, fire resistance, resistance to envi-ronment factors
- Made with high quality raw materials and high technology - The manufacturing process consists of a series of rigorous
steps so the finished product will meet the highest qualityrequirements
- Precast elements are tested in our laboratory; following this
examination a certificate of conformity of the product is is-sued
ASA CONS OFFERS TO ITS CLIENTS:- One stop shop- Final work warranty - Reduced time from design to fabrication and installation, al-
lowing for construction in temperatures as low as -20C - Lower costs than with a traditional building- No third parties, as our installation teams work with already
known items, produced according to the same standards
DESIGNThe first step in creating precast elements is correct and ac-curate design. The design department takes information fromthe final beneficiary and turns it into blueprints, so that the
finished product fully meets our clients needs. The depart-ment includes experienced professionals , able to preventany potential obstacles in the effective elevation of precaststructures. We also provide specialized consulting for ourcustomers.
Oferta companiei /Company offer
Soluii complete marca ASA CONSComplete solutions by ASA CONS
-
8/10/2019 Catalog ASA CONS 2014 s
7/1007
EXECUTIONThe company can produce precast elements needed for the
fast elevation of slender structures with large span, with amaximum post-to-post distance of 36 m. Up to now, 300,000m3 of precast concrete left our factory for sites across thecountry, for a total of about 3,000,000 m 2 built.
LOGISTICS ASA CONS providesadequate transport for normal and over-sized elements, including columns and beams with a length of26 or 30 m. We partner with 15 transportation companies ex-
perienced in the transportation of regular and oversized loads.
For lifting on site, the company is equipped with 70- and 80-ton Liebherr cranes and 80-ton Tadano Faun crane, as well asManitou erecting platforms.
ASSEMBLY ASA CONS has professional installation teams, with extensiveexperience in the field. ASA CONS has executed over 500 pre-cast structures for civil and industrial construction . The com-
pany can manage projects that include the entire structuralbuild - the precast elements as well as the monolithic build.
A common extension of our mandate is bringing the projectto the building envelope, inclusive of enclosures. At times, wehave acted as the general contractor for the entire project,as it has been the case of the pharmaceutical center RichterGedeon in Targu Mures.
EXECUIEASA CONS are capacitatea de a produce elementele prefabrica-te necesare ridicrii n scurt timp de structuri zvelte, cu deschi-dere mare, permind o distan maxim ntre stlpi de pnla 36 m. Pn n prezent 300.000 m3 de beton prefabricat auieit pe poarta fabricii spre antiere din ntreaga ar, echiva-lnd aproximativ 3.000.000 m2 construii.
LOGISTICAASA CONS asigur printr-o logistic adecvattransportul ele-mentelor cu dimensiuni normale i gabarit depit, inclusivstlpi i grinzi cu lungimea de 26 sau 30 m, avnd un porto-foliu tradiional de 15 companii cu care colaboreaz, fiecarespecializat n transportul elementelor normale i cu gabaritdepit. Pentru ridicarea on site, compania are n dotare auto-macarale tip LIEBHERR de 70 i 80 tone i tip TADANO FAUN cucapacitatea de 80 tone, precum i platforme autoridictoareMANITOU.
MONTAJASA CONS dispune de echipe de montaj formate din profe-sioniti cu o experien vast n domeniu. Pn acum, ASACONS a executat peste 500 de structuri prefabricate pentruconstrucii civile i industriale. De asemenea, echipele coor-doneaz i lucrri care duc la realizarea cldirii n concept destructur la rou, respectiv ntreaga structur de rezisten,att componentele prefabricate, ct i structura monolit.
O extindere uzual o reprezint realizarea cldirii la nivel deanvelop, inclusiv nchideri, uneori extinzndu-ne competen-ele pn la asigurarea antreprizei generale a unei construc-ii, ca exemplu execuia centrului farmaceutic Richter GedeonTrgu Mure.
Oferta companiei /Company offer
-
8/10/2019 Catalog ASA CONS 2014 s
8/1008
Lucrri de referin - centre comerciale /Reference works - commercial centers
Armonia - 2 magazine /2 stores
Baumax - 5 magazine /5 stores
Anul construciei /Construction year : 2007-2008Suprafaa total /Total area : 90 000 m2
Anul construciei /Construction year : 2006-2011Suprafaa total /Total area : 58 000 m2
-
8/10/2019 Catalog ASA CONS 2014 s
9/1009
Lucrri de referin - centre comerciale /Reference works - commercial centers
Anul construciei /Construction year : 2004-2011Suprafaa total /Total area : 160 000 m2
Cora - 4 magazine /4 stores
Dedeman - 22 magazine / 22 stores
Anul construciei /Construction year : 2006-2014Suprafaa total /Total area : 300 000 m2
-
8/10/2019 Catalog ASA CONS 2014 s
10/10010
Lucrri de referin - centre comerciale /Reference works - commercial centers
Jupiter Piteti
Anul construciei /Construction year : 2008Suprafaa / Area: 55 000 m2
Anul construciei /Construction year : 2008-2009Suprafaa / Area: 61 000 m2
Era Shopping Park Oradea
-
8/10/2019 Catalog ASA CONS 2014 s
11/10011
Lucrri de referin - centre comerciale /Reference works - commercial centers
Anul construciei /Construction year : 2005-2014Suprafaa total /Total area : 220 000 m2
Kaufland - 27 magazine /27 stores
Kika Bucureti
Anul construciei /Construction year : 2008Suprafaa / Area: 27 000 m2
-
8/10/2019 Catalog ASA CONS 2014 s
12/10012
Lucrri de referin - centre comerciale /Reference works - commercial centers
Obi Sibiu
Anul construciei /Construction year : 2010Suprafaa / Area: 10 000 m2
Anul construciei /Construction year : 1999-2006Suprafaa total /Total area : 220 000 m2
Metro Cash & Carry - 19 magazine /19 stores
-
8/10/2019 Catalog ASA CONS 2014 s
13/10013
Lucrri de referin - centre comerciale /Reference works - commercial centers
Anul construciei /Construction year : 2009-2014Suprafaa total /Total area : 32 000 m2
Anul construciei /Construction year : 2006Suprafaa / Area: 86 000 m2
Penny Market - 22 magazine /22 stores
Polus Cluj-Napoca
-
8/10/2019 Catalog ASA CONS 2014 s
14/10014
Lucrri de referin - centre comerciale /Reference works - commercial centers
Anul construciei /Construction year : 2006-2008Suprafaa total /Total area : 77 000 m2
Real Hypermarket - 5 magazine /5 stores
Praktiker - 5 magazine /5 stores
Anul construciei /Construction year : 2003-2008Suprafaa total /Total area : 70 000 m2
-
8/10/2019 Catalog ASA CONS 2014 s
15/10015
Lucrri de referin - centre comerciale, construcii industriale /Reference works - commercial centers, industrial buildings
Anul construciei /Construction year : 2006-2013Suprafaa / Area : 47 000 m 2
Bosch Blaj
Centru Comercial Trgu Jiu
Anul construciei /Construction year : 2013-2014Suprafaa / Area : 31 000 m 2
-
8/10/2019 Catalog ASA CONS 2014 s
16/10016
Lucrri de referin - construcii industriale /Reference works - industrial buildings
Anul construciei /Construction year : 2000Suprafaa / Area: 165 000 m2
Continental Timioara
Calsonic Kansei Ploieti
Anul construciei /Construction year : 2007Suprafaa / Area: 19 000 m2
-
8/10/2019 Catalog ASA CONS 2014 s
17/10017
Lucrri de referin - construcii industriale / Reference works - industrial buildings
Anul construciei /Construction year : 2008-2013Suprafaa total /Total area : 55 000 m2
Emerson Cluj - 5 fabrici /5 factories
Egger Rdui
Anul construciei /Construction year : 2007-2013Suprafaa / Area: 70 000 m2
-
8/10/2019 Catalog ASA CONS 2014 s
18/10018
Lucrri de referin - construcii industriale /Reference works - industrial buildings
Holzindustrie Schweighoffer Baco Comneti
Anul construciei /Construction year : 2010-2011Suprafaa / Area: 45 000 m2
Anul construciei /Construction year : 2013Suprafaa total /Total area : 16 000 m2
Emerson Oradea - 1 fabric /1 factory
-
8/10/2019 Catalog ASA CONS 2014 s
19/10019
Lucrri de referin - construcii industriale /Reference works - industrial buildings
Ina Schaeffler Braov
Anul construciei /Construction year : 2003-2008Suprafaa / Area: 100 000 m2
Anul construciei /Construction year : 2012Suprafaa / Area: 7 000 m2
Huf Arad - hal producie / production hall
-
8/10/2019 Catalog ASA CONS 2014 s
20/10020
Lucrri de referin - construcii industriale /Reference works - industrial buildings
Makita Brneti - 3 fabrici /3 factories
Anul construciei /Construction year : 2007-2013Suprafaa total /Total area : 55 000 m2
Anul construciei /Construction year : 2008Suprafaa / Area: 40 000 m2
Kronospan Braov
-
8/10/2019 Catalog ASA CONS 2014 s
21/10021
Anul construciei /Construction year : 2012-2013Suprafaa / Area: 28 000 m2
Plexus Oradea
Anul construciei /Construction year : 2012Suprafaa / Area: 8 000 m2
MGI Coutier Ghiroda
Lucrri de referin - construcii industriale /Reference works - industrial buildings
-
8/10/2019 Catalog ASA CONS 2014 s
22/10022
Lucrri de referin - depozite logistice /Reference works - logistic warehouses
Aramis Baia Mare
Anul construciei /Construction year : 2014Suprafaa / Area: 37 500 m2
Bucharest West Logistic Park
Anul construciei /Construction year : 2008Suprafaa / Area: 7 000 m2
-
8/10/2019 Catalog ASA CONS 2014 s
23/10023
Lucrri de referin - depozite logistice /Reference works - logistic warehouses
Gedeon Richter Trgu-Mure
Anul construciei /Construction year : 2007Suprafaa / Area: 13 000 m2
Anul construciei /Construction year : 2009Suprafaa / Area: 70 000 m2
Dacia Renault Piteti
-
8/10/2019 Catalog ASA CONS 2014 s
24/10024
Lucrri de referin - depozite logistice /Reference works - logistic warehouses
Log Center - 2 depozite /2 warehouses
Anul construciei /Construction year : 2007-2008Suprafaa total /Total area : 35 000 m2
Anul construciei /Construction year : 2011Suprafaa / Area: 46 000 m2
Lidl Iernut
-
8/10/2019 Catalog ASA CONS 2014 s
25/10025
Lucrri de referin - depozite logistice, construcii civile /Reference works - logistic warehouses, civil buildings
Ansamblu rezidenial Sibiu /Residential buildings Sibiu
Anul construciei /Construction year : 2014Suprafaa / Area: 630 m2
Rewe Turda
Anul construciei /Construction year : 2007-2012Suprafaa / Area: 24 000 m2
-
8/10/2019 Catalog ASA CONS 2014 s
26/10026
Ansamblu rezidenial Cluj-Napoca /Residential buildings Cluj-Napoca
Anul construciei /Construction year : 2014-2015Suprafaa / Area: 16 000 m2
Lucrri de referin - construcii civile /Reference works - civil buildings
Piaa agroalimentar Rogerius Oradea / Rogerius marketplace Oradea
Anul construciei /Construction year : 2014-2015Suprafaa / Area: 8 000 m2
-
8/10/2019 Catalog ASA CONS 2014 s
27/10027
Lucrri de referin - lucrri infrastructur /Reference works - infrastructure works
Anul construciei /Construction year : 2007
Pasaj Iulius Mall /Iulius Mall passage Cluj-Napoca
Pasaj Polus Center / Polus Center passage Cluj-Napoca
Anul construciei /Construction year : 2007
-
8/10/2019 Catalog ASA CONS 2014 s
28/10028
Lucrri de referin - lucrri infrastructur /Reference works - infrastructure works
Anul construciei /Construction year : 2013
Pod Snpaul / Sanpaul bridge
Poduri peste rul Some / Bridges over river Somes
Anul construciei /Construction year : 2008
-
8/10/2019 Catalog ASA CONS 2014 s
29/10029
Anul construciei /Construction year : 2009
oseaua de centur / Beltway Cluj-Napoca
Autostrada Transilvania / Transilvania highway
Anul construciei /Construction year : 2009-2010
Lucrri de referin - lucrri infrastructur /Reference works - infrastructure works
-
8/10/2019 Catalog ASA CONS 2014 s
30/10030
Lucrri de referin /Reference works
-
8/10/2019 Catalog ASA CONS 2014 s
31/100
-
8/10/2019 Catalog ASA CONS 2014 s
32/100
ASA CONS ROMNIA SRLStr. 22 Decembrie 1989 nr. 27401113 Turda RomniaTel. +40 264 312 765 Fax +40 264 317 057contact@asacons.ro www.asacons.ro www.consolis.ro
-
8/10/2019 Catalog ASA CONS 2014 s
33/100
peste 500 structuri prefabricatepeste 300.000 m 3 de beton prefabricat
peste 3.000.000 m2
construiiover 500 precast structures
over 300,000 m 3 precast concreteover 3,000,000 m 2 built
Prefabricate din beton armat i precomprimatReinforced and prestressed concrete elements
-
8/10/2019 Catalog ASA CONS 2014 s
34/100
-
8/10/2019 Catalog ASA CONS 2014 s
35/100
Construcii industriale - produse
Industrial buildings - products
31
-
8/10/2019 Catalog ASA CONS 2014 s
36/10032
Produse - Elemente de fundare /Products - Foundation elements
Pahare / Pocket foundations
Din structura fundaiei pahar se execut prefabricat gulerul, care transportat n antier se rotete cu 180 n plan vertical, dup care se leag pe mustiarmtura tlpii paharului i se monteaz pe poziie.Eliminnd manopera n antier i timpul de maturizare a betonului, viteza demontaj a structurii crete considerabil.
From the structure of the pocket foundation the collar is precast executed; onsite it is vertically rotated by 180 degrees, then the plate reinforcement is con-nected on stubs and assembled in position.By eliminating labor on site and concrete maturation time, the erection speedof the structure rises considerably.
Vedere 3D /3D view
-
8/10/2019 Catalog ASA CONS 2014 s
37/10033
Produse - Elemente de fundare /Products - Foundation elements
Nr. crt. a b e h
1 0.90 0.90 0.25 1.10
2 1.20 1.20 0.25 1.10
3 1.30 1.30 0.25 1.10
4 1.50 1.50 0.30 1.10
5 1.50 2.30 0.30 1.10
6 1.60 2.60 0.30 1.10
1 - egalizare2 - talp monolit3 - pahar prefabricat
1 - equalization2 - monolithic base3 - precast pocket foundation
Dimensiuni /Dimensions
Seciune caracteristic /Specific section
-
8/10/2019 Catalog ASA CONS 2014 s
38/10034
Produse - Stlpi /Products - Columns
Stlpi / Columns
Lungimile stlpilor variaz ntre 5 i 24 m. /The column length varies between 5 and 24 m.
Stlpii prefabricai sunt executai ntr-o varietate de dimensiuni, forme i lun-gimi. Suprafaa betonului este neted, iar muchiile sunt teite. n general stl-pii necesit o seciune transversal minim de 300 x 300 mm, care asigur obun conexiune cu grinzile, o manipulare uoar, precum i o rezisten la focde 120 minute fcndu-i potrivii pentru o gam larg de construcii. The columns are made in a variety of dimensions, shapes and lengths. Thesurface of the concrete is smooth and the edges are beveled. Generally thecolumns require a minimum cross section of 300 x 300 mm that ensures agood connection with the beams, an easy handling and a 120 minutes fireresistance, making them suitable for a large range of construction.
Vedere 3D /3D view
-
8/10/2019 Catalog ASA CONS 2014 s
39/10035
a
b
Produse - Stlpi /Products - Columns
Nr. crt. a b
1 0.25 0.25
2 0.40 0.40
3 0.50 0.50
4 0.54 0.60
5 0.60 0.60
6 0.70 0.70
7 0.80 0.80
8 0.80 1.20
Seciune caracteristic /Specific section
Dimensiuni /Dimensions
-
8/10/2019 Catalog ASA CONS 2014 s
40/10036
Produse - Elemente prefabricate de acoperi /Products - Roof precast elements
Grinzi I drepte / Straight I beams
Lungimea poate varia de la 12 la 27 m. /Lenght can vary between 12 and 27 m.
Vedere 3D /3D view
Grinzile principale se execut cu seciune constant sau seciune variabilfuncie de soluia de scurgere a apelor de pe acoperi. La rndul lor ambeletipuri pot avea seciunea transversal I sau T funcie de deschiderea halei i ncrcrile la nivelul acoperiului, iar mbinarea acestora cu stlpii structuriieste de tip uscat.
The main beams are executed with constant or variable section dependingon the solution of draining water of the roof. Both types can have I or T crosssection depending on the halls opening and loads at the roof level. The con-nection with the structures columns is made by dry mechanical fixing.
-
8/10/2019 Catalog ASA CONS 2014 s
41/10037
Produse - Elemente prefabricate de acoperi /Products - Roof precast elements
Capt /End Coam /Ridge
Seciuni caracteristice /Specific sections
Vedere lateral /Side view
-
8/10/2019 Catalog ASA CONS 2014 s
42/10038
Produse - Elemente prefabricate de acoperi /Products - Roof precast elements
Grinzi 30 m I n dou ape /30 m I beams
Lungimea poate varia de la 12 la 30 m. /Lenght can vary between 12 and 30 m.
Vedere 3D /3D view
Grinzile principale se execut cu seciune constant sau seciune variabilfuncie de soluia de scurgere a apelor de pe acoperi. La rndul lor ambeletipuri pot avea seciunea transversal I sau T funcie de deschiderea halei i ncrcrile la nivelul acoperiului, iar mbinarea acestora cu stlpii structuriieste de tip uscat.
The main beams are executed with constant or variable section dependingon the solution of draining water of the roof. Both types can have I or T crosssection depending on the halls opening and loads at the roof level. The con-nection with the structures columns is made by dry mechanical fixing.
-
8/10/2019 Catalog ASA CONS 2014 s
43/10039
15
9 7
2 0
5 2
15
30
60
1 1 9
60
30
135858
523 523
9 0
2 0
5 3
1 4 5
2 3
5 8
Produse - Elemente prefabricate de acoperi /Products - Roof precast elements
Pant 3% /Slope 3%Pant 3% /Slope 3%
Capt /End Coam /Ridge
Seciuni caracteristice /Specific sections
Vedere lateral /Side view
-
8/10/2019 Catalog ASA CONS 2014 s
44/10040
Produse - Elemente prefabricate de acoperi /Products - Roof precast elements
Grinzi T drepte / Straight T beams
Lungimea poate varia de la 12 la 27 m. /Lenght can vary between 12 and 27 m.
Vedere 3D /3D view
Grinzile principale se execut cu seciune constant sau seciune variabilfuncie de soluia de scurgere a apelor de pe acoperi. La rndul lor ambeletipuri pot avea seciunea transversal I sau T funcie de deschiderea halei i ncrcrile la nivelul acoperiului, iar mbinarea acestora cu stlpii structuriieste de tip uscat.
The main beams are executed with constant or variable section dependingon the solution of draining water of the roof. Both types can have I or T crosssection depending on the halls opening and loads at the roof level. The con-nection with the structures columns is made by dry mechanical fixing.
-
8/10/2019 Catalog ASA CONS 2014 s
45/10041
Produse - Elemente prefabricate de acoperi /Products - Roof precast elements
Nr. crt. a
1 0.18
2 0.20
3 0.23
Dimensiuni /Dimensions
Vedere lateral /Side view
Seciune caracteristic /Specific section
-
8/10/2019 Catalog ASA CONS 2014 s
46/10042
Produse - Elemente prefabricate de acoperi / Products - Roof precast elements
Grinzi T n dou ape /T beams
Lungimea poate varia de la 12 la 24 m. /Lenght can vary between 12 and 24 m.
Vedere 3D /3D view
Grinzile principale se execut cu seciune constant sau seciune variabilfuncie de soluia de scurgere a apelor de pe acoperi. La rndul lor ambeletipuri pot avea seciunea transversal I sau T funcie de deschiderea halei i ncrcrile la nivelul acoperiului, iar mbinarea acestora cu stlpii structuriieste de tip uscat.
The main beams are executed with constant or variable section dependingon the solution of draining water of the roof. Both types can have I or T crosssection depending on the halls opening and loads at the roof level. The con-nection with the structures columns is made by dry mechanical fixing.
-
8/10/2019 Catalog ASA CONS 2014 s
47/10043
1 0 5
Pant 3% /Slope 3% Pant 3% /Slope 3%
Produse - Elemente prefabricate de acoperi /Products - Roof precast elements
Seciuni caracteristice /Specific sections
Capt /End Coam /Ridge
Vedere lateral /Side view
-
8/10/2019 Catalog ASA CONS 2014 s
48/10044
Produse - Elemente prefabricate de acoperi /Products - Roof precast elements
Pane seciune T /T section purlins
Panele se execut n special n variant precomprimat cu seciuni trapezoi-dale sau T. Lungimea lor i mbinarea cu restul structurii se stabilete n partepentru fiecare structur.
Purlins can be made also prestressed with trapezoidal or T section. The lengthand the connection with the rest of the structure are determined separately
for each structure.
Vedere 3D /3D view
Lungimea poate varia de la 6 la 24 m. /Lenght can vary between 6 and 24 m.
-
8/10/2019 Catalog ASA CONS 2014 s
49/10045
Produse - Elemente prefabricate de acoperi /Products - Roof precast elements
a b c d
0.30-0.50 0.14-0.20 0.31-0.61 0.10-0.30
Dimensiuni /Dimensions
Vedere lateral /Side view
Seciune caracteristic /Specific section
-
8/10/2019 Catalog ASA CONS 2014 s
50/10046
Produse - Elemente prefabricate de acoperi / Products - Roof precast elements
Pane trapez / Trapezoidal purlins
Vedere 3D /3D view
Lungimea poate varia de la 6 la 24 m. /Lenght can vary between 6 and 24 m.
Panele se execut n special n variant precomprimat cu seciuni trapezoi-dale sau T. Lungimea lor i mbinarea cu restul structurii se stabilete n partepentru fiecare structur.
Purlins can be made also prestressed with trapezoidal or T section. The lengthand the connection with the rest of the structure are determined separately
for each structure.
-
8/10/2019 Catalog ASA CONS 2014 s
51/10047
Produse - Elemente prefabricate de acoperi / Products - Roof precast elements
Seciuni caracteristice /Specific sections
Vedere lateral /Side view
-
8/10/2019 Catalog ASA CONS 2014 s
52/10048
Lungimea poate varia de la 6 la 15 m. /Lenght can vary between 6 and 15 m.
Grinzile de planeu servesc ca suport pentru plcile constituen-te ale planeului. Pe aceste elemente se pot rezema fii cu go-luri, predale i alte elemente de planeu. Prin alctuirea acestor ele-mente se poate asigura continuarea pe reazeme n suprabetonare.
Floor beams are used as support for constituent slabs of the floor. On theseelements hollow core slabs, filigrames and other floor elements can be rest.Using floor beams, bearings extension in over concreting can be assured.
Vedere 3D /3D view
Produse - Elemente de planeu intermediar /Products - Intermediate floor elements
Grinzi de planeu / Floor beams
-
8/10/2019 Catalog ASA CONS 2014 s
53/10049
Produse - Elemente de planeu intermediar /Products - Intermediate floor elements
a b
0.40-0.80 0.40-0.80
Seciune caracteristic /Specific section
Dimensiuni /Dimensions
Vedere lateral /Side view
a
b
-
8/10/2019 Catalog ASA CONS 2014 s
54/10050
Produse - Elemente de planeu intermediar /Products - Intermediate floor elements
Elemente TT /TT elements
Lungimea poate varia de la 6 la 17 m. /Lenght can vary between 6 and 17 m.
Acest tip de elemente se folosete pentru planee ncrcate cu sarcini maripn la deschideri de 17 m. Capacitatea portant a acestora se proiecteazdup necesiti prin dimensionarea suprabetonrii. Variaia dimensionrilorse poate asigura prin limea plcii laterale, respectiv nlimea i limeanervurilor.
This type of elements are used for slabs loaded with high loads up to 17 mspans. Their bearing capacity is designed according to requirements by dimen-sioning of the over concreting. The variation of the correct dimensioning canbe assured by the width of side slab, respectively height and width of the ribs.
Vedere 3D /3D view
-
8/10/2019 Catalog ASA CONS 2014 s
55/10051
Produse - Elemente de planeu intermediar /Products - Intermediate floor elements
Seciune caracteristic /Specific section
Vedere lateral /Side view
-
8/10/2019 Catalog ASA CONS 2014 s
56/10052
Produse - Elemente de planeu intermediar /Products - Intermediate floor elements
Fii cu goluri - FGP 200 /Hollow core slabs - FGP 200
Aceste produse sunt executate cu tehnologie de beton extrudat pe piste continuede 90 m cu debitare la lungime dup necesitile proiectantului. Sunt executatedin beton C50/60 i cu armare exclusiv cu toroane dup o conformare rezulta-t din dimensionare. nlimea seciunilor produse la ASA sunt de 20 i 32 cm.
These products are executed with extruded concrete technology on 90 m con-tinuous tracks with cut to length according to designers needs. They are ex-ecuted of C50/60 concrete with reinforcing exclusively with strands accordingto a sizing calculation. Sections produced at ASA CONS are of 20 and 32 cm.
Vedere 3D /3D view
-
8/10/2019 Catalog ASA CONS 2014 s
57/10053
n c r c
r i a d m
i s e , v a
l o r i c a r a c t e r
i s t i c e
P e r m
i s s i
b l e l o a d
, c h a r a c
t e r i s t
i c v a
l u e s
[ d a N
/ m 2 ]
Produse - Elemente de planeu intermediar /Products - Intermediate floor elements
Seciune caracteristic /Specific section
H(mm)
I(mm)
TIPCod
produsNumrtoroane
Diametrutoron (mm)
200 1200
FGP-200/A 69.3FGP-200/B 8
FGP-200/C 612.9
FGP-200/D 8
t o r o a n e
s t r a n
d s
toroane strands
(section area)(volume/meter)(weight/meter)(point/meter)(total weight)(density/m 3 )
Deschidere Opening
-
8/10/2019 Catalog ASA CONS 2014 s
58/10054
Fii cu goluri - FGP 320 /Hollow core slabs - FGP 320
Produse - Elemente de planeu intermediar /Products - Intermediate floor elements
Vedere 3D /3D view
Aceste produse sunt executate cu tehnologie de beton extrudat pe piste continuede 90 m cu debitare la lungime dup necesitile proiectantului. Sunt executatedin beton C50/60 i cu armare exclusiv cu toroane dup o conformare rezulta-t din dimensionare. nlimea seciunilor produse la ASA sunt de 20 i 32 cm.
These products are executed with extruded concrete technology on 90 m con-tinuous tracks with cut to length according to designers needs. They are ex-ecuted of C50/60 concrete with reinforcing exclusively with strands accordingto a sizing calculation. Sections produced at ASA CONS are of 20 and 32 cm.
-
8/10/2019 Catalog ASA CONS 2014 s
59/10055
H(mm)
I(mm)
TIPCod
produsNumrtoroane
Diametrutoron (mm)
320 1200
FGP-320/A 5+2
12.9FGP-320/B 7+2
FGP-320/C 8+2
FGP-320/D 11+2
Seciune caracteristic /Specific section
Produse - Elemente de planeu intermediar /Products - Intermediate floor elements
toroane strands
toroane strands
5 buc TBP 12.9-1860 (12.9)Pk=110 kN
7 buc TBP 12.9-1860 (12.9)Pk=110 kN
8 buc TBP 12.9-1860 (12.9)Pk=110 kN
11 buc TBP 12.9-1860 (12.9)Pk=110 kN
FGP-320/A
FGP-320/B
FGP-320/C
FGP-320/D
volum/metru: V=0.1993 m3/mlmasa/metru: M=478.32 kg/mlrost/metru: m=33.6 kg/ml
densitate/m 33: 24.00 kN/m
FGP-320
1300
1200
1100
1000
900
800
700
600
500
400
300
200
100
A (7 TBP-12,90)B (9 TBP-12,90)
C (10 TBP-12,90)D (13 TBP-12,90)
6559
90510251280
45510
665765970
31011
485565740
20012
350420565
11513
245305430
14
160210325
15
135235
16
165
(section area)(volume/meter)(weight/meter)(point/meter)(total weight)
(density/m 3 )
n c r c
r i a d m
i s e , v a
l o r i c a r a c t e r
i s t i c e
P e r m
i s s i
b l e
l o a d
, c h a r a c
t e r i s t
i c v a
l u e s
[ d a N
/ m 2 ]
Deschidere Opening
-
8/10/2019 Catalog ASA CONS 2014 s
60/10056
Produse - Elemente de planeu intermediar /Products - Intermediate floor elements
Predale / Filigrames
Vedere 3D /3D view
Lungimea poate varia de la 2 la 8 m. /Lenght can vary between 2 and 8 m.
Sunt elementele componente pentru planee la care prin suprabetonare serealizeaz o structur cu planeu mixt. Acestea au rol de cofraj i de obiceitrebuie sprijinite pe durata turnrii i maturizrii suprabetonrii.
These products are component elements for floors whereat by over concretingis achieved a monolith floor. These elements have formwork function and usu-ally must be supported during casting period and over concreting maturation.
-
8/10/2019 Catalog ASA CONS 2014 s
61/10057
Produse - Elemente de planeu intermediar /Products - Intermediate floor elements
Seciune caracteristic /Specific section
suprafa rugoasrough surface
suprafa rugoasrough surface
-
8/10/2019 Catalog ASA CONS 2014 s
62/10058
Produse - Panouri de faad i grinzi de soclu /Products - Facade panels and cap beams
Vedere 3D /3D view
Panourile prefabricate pot fi interioare de tip antifoc i exterioare de tiptristrat. Acestea la rndul lor sunt panouri de soclu i panouri curente. Di-mensiunile panourilor sunt limitate de posibilitatea manipulrii i trans-portului. Fixarea lor de structur se face cu mbinri sudate sau nurubate.
Precast panels can be interiors type fire resistant and exteriors type tri layerwhich at their turn can be socle panels and current panels. The dimensions ofthe panel are limited by the possibility of manipulation and transport. The set-ting with the structure is made by screwed or welded joints.
Not: vezi i panourile grafice de la pagina 66.Note: see also the graphic panels on page 66.
Panouri de faad monostrat i tristrat - beton aparent / Monolayer and trilayerconcrete facade panels - exposed concrete
-
8/10/2019 Catalog ASA CONS 2014 s
63/10059
Produse - Panouri de faad i grinzi de soclu /Products - Facade panels and cap beams
Tip/mrime H max L max b1 t b2
Panou tristrat 4.8 m 15 m 12-16 cm 6-8 cm 7-10 cm
Panou monostrat 4.8 m 15 m 12-35 cm - -
Seciuni caracteristice /Specific sections
Dimensiuni /Dimensions
Vedere lateral /Side view
-
8/10/2019 Catalog ASA CONS 2014 s
64/10060
Produse - Trepte prefabricate beton armat /Products - Precast concrete staircase
Vedere 3D /3D view
Trepte prefabricate beton armat / Precast concrete staircase
Scara prefabricat din beton armat este un element de construcie care asi-gur legtura pe vertical ntre diferite etaje ale cldirii. Dintre avantajeleprefabricrii sistemului de trepte merit menionate: dimensiunile exacte,forma perfect i identic a elementelor proiectate, gama variat de realizarea acestora n funcie de necesitile clientului, precum i reducerea timpuluide execuie pe antier prin eliminarea timpului necesar realizrii cofrajului.
The precast concrete staircase is a construction element that provides verticalconnection between different floors of the building. Among the advantages ofconcrete prefabricating system worth mentioning: size precision, perfect sha-
pe and identical elements, designed for a wide range of projects, depending oncustomer needs and reducing execution time on site by eliminating the timerequired to complete the shuttering.
-
8/10/2019 Catalog ASA CONS 2014 s
65/10061
Produse - Trepte prefabricate beton armat /Products - Precast concrete steps
d
AA
Seciuni caracteristice /Specific sections
Not: dimensiunea variaz n funcie de specificul proiectului. /Note: size varies depending on the type of the project.
Vedere lateral /Side view
h
ab
l
-
8/10/2019 Catalog ASA CONS 2014 s
66/10062
-
8/10/2019 Catalog ASA CONS 2014 s
67/10063
Construcii civile - produse
Civil buildings - products
-
8/10/2019 Catalog ASA CONS 2014 s
68/10064
Informaii utile /Useful information
-
8/10/2019 Catalog ASA CONS 2014 s
69/10065
Informaii utile /Useful information
Analiz comparativ a planeelor / Concrete slab benchmarking
Avantajele produselor prefabricate /Precast concrete products advantages
Timp de execuie i montaj redus, fiind independentde condiiile meteorologice
Performance and reduced installation time, it doesnot depend on the weather
Cost redus de execuie i montaj Lower costs for manufacturing and assembly
Pot lua orice forme i dimensiuni Any shape or size
Calitate superioar n producie, datorit controluluipermanent din fabric
High quality production due to permanent producti-on control
Elementele prefabricate se livreaz pe antier cu cer-tificate de conformitate
Prefabricated elements are delivered on site withcompliance certificates
Asigur protecie termic, fonic, mpotriva apei ia focului
Resistant to most external factors thermal, sound,water, fire
Elementele prefabricate sunt durabile; rezistena lorcrete gradual n timp
Prefabricated elements are durable; their resistancegradually increases over time
Utilizare mai buna a spaiului construit datorit des-chiderilor mari a elementelor prefabricate
Better use of space built through large openings pre- fabricated elements
Indicator / Indicator FGP + suprabetonare /Hollow concrete slab Planeu monolit / Monolithic slab
lei/m2 lei/m2Fabricaie /Production 83Transport /Transport 15
Pre montaj /Installation price 27Macara /Crane inclus da nu
Cofraj /Framework nu 80 manoper + materialArmare /Reinforcement 22 4kg/m2, 8/20 91 17kg/m2, 28/10
Folie /Foil nu daBetonare /Casting 24 8 cm 45 15 cm, manoper + material
Finisaj /Finishing 11 1 strat tinci nu necesit alte straturiGrosime /Thickness 25-45 cm 15 cm
Timp /Time 40 m2/h 5 m2/hPersonal /Personnel 4 6
Fono/Termo /Phonic/Thermal da nuTotal costuri /Total costs 182 mai economic i mai rapid 216
-
8/10/2019 Catalog ASA CONS 2014 s
70/10066
Panouri grafice / Graphic panels
Sectorul comercial /Commercial sector
Produse - Panouri grafice /Products - Graphic panels
Panourile grafice sunt unprodus prefabricat nou, unicat n Romnia, careofer plusvaloare proiectelor dumneavoastr. Prin crearea unor suprafee tex-turate cu undesign original la alegere, acestea vor transforma o simpl con-strucie ntr-o oper de art. Nu exist limite n dimensiunea i tipul designuluisau imaginii unice utilizate n crearea texturii panourilor grafice. ASA CONS estesingurul productor din Romnia care deine tehnologia deproducie i v poate oferi acest tip de panouri. Ele sunt realizate dup o teh-nologie de ultim generaie, originar din Finlanda. Metoda utilizat are cai rezultat o suprafa texturat, neted sau complet expus. Textura de pesuprafa este rezultatul contrastului dintre faa panoului i expunerea finisa- jului agregat. Aceasta este o metod eficient din punct de vedere al costurilor,finisajul agregat fiind folosit n faza de producie a elementelor de beton..
Aplicabilitatea panourilor grafice este similar cu cea a panourilor de faad,ele putnd fi implementate ntr-o gam variat de tipuri de construcii, dela construcii civile i industriale la lucrri de infrastructur, att pentruexterior, ct i pentru interior.
Prin utilizarea panourilor grafice vei obine o faad cu stil la un pre rezonabil.
Panourile grafice sunt: Cu mult stil i la un pre rezonabil Durabile i uor de ntreinut Testate i sigure
Panourile grafice nseamn noi posibiliti arhitecturale i o nou modalitatede finisare a construciilor.Singura limit este imaginaia!
The graphic panels are a new precast product, unique in Romania , providingadded value to your projects. By creating textured surfaces with an original design of choice , they will turn a simple design into a work of art. There areno limits on the size and type of design or single image graphic panels usedto create texture.
ASA CONS isthe only producer in Romania holding production technologyand capability to provide this type of facade panels. They are created usingcutting-edge technology, originally from Finland. The method used results in a patterned, smooth or completely exposed surface. The pattern on the surfaceresults from the contrast between the fairface and the exposed fine aggregate finish. This is a cost-effective, tested and safe method because traditional ex- posed fine aggregate materials and processes are used in the manufacturingof concrete elements.
The applicability of graphical panels is similar to the facade panels; they canbe implemented in a wide range of building types, from civil and industrialbuildings to infrastructure works , both for exterior and interior projects.
Graphic concrete offers the chance to produce a stylish facade at a reason-able price.
Graphic concrete is: Stylish and reasonably priced Durable and easy to maintain Tested and safe
Graphic concrete offers new building possibilities and a new way of finishingconstructions. Imagination is your only limit!
-
8/10/2019 Catalog ASA CONS 2014 s
71/100
Produse - Panouri grafice /Products - Graphic panels
Sectorul industrial /Industrial sector
Sectorul rezidenial /Residential sector Sectorul ambiental /Environmental sector
Sectorul public /Public sector
Produse - Panouri grafice /Products - Graphic panels
-
8/10/2019 Catalog ASA CONS 2014 s
72/100
Produse - Elemente de planeu intermediar /Products - Intermediate floor elements
Fii cu goluri - FGP 200 / Hollow core slabs - FGP 200
Aceste produse sunt executate cu tehnologie de beton extrudat pe piste continuede 90 m cu debitare la lungime dup necesitile proiectantului. Sunt executatedin beton C50/60 i cu armare exclusiv cu toroane dup o conformare rezulta-t din dimensionare. nlimea seciunilor produse la ASA sunt de 20 i 32 cm.
These products are executed with extruded concrete technology on 90 m con-tinuous tracks with cut to length according to designers needs. They are ex-ecuted of C50/60 concrete with reinforcing exclusively with strands accordingto a sizing calculation. Sections produced at ASA CONS are of 20 and 32 cm.
Vedere 3D /3D view
6867
-
8/10/2019 Catalog ASA CONS 2014 s
73/10069
Produse - Elemente de planeu intermediar /Products - Intermediate floor elements
Seciune caracteristic /Specific section
H(mm)
I(mm)
TIPCod
produsNumrtoroane
Diametrutoron (mm)
200 1200
FGP-200/A 69.3FGP-200/B 8
FGP-200/C 612.9
FGP-200/D 8
t o r o a n e
s t r a n
d s
toroane strands
(section area)(volume/meter)(weight/meter)(point/meter)(total weight)(density/m 3 )
n c r c
r i a d m
i s e , v a
l o r i c a r a c t e r
i s t i c e
P e r m
i s s i
b l e l o a d
, c h a r a c
t e r i s t
i c v a
l u e s
[ d a N
/ m 2 ]
Deschidere Opening
-
8/10/2019 Catalog ASA CONS 2014 s
74/10070
Fii cu goluri - FGP 320 /Hollow core slabs - FGP 320
Produse - Elemente de planeu intermediar /Products - Intermediate floor elements
Vedere 3D /3D view
Aceste produse sunt executate cu tehnologie de beton extrudat pe piste continuede 90 m cu debitare la lungime dup necesitile proiectantului. Sunt executatedin beton C50/60 i cu armare exclusiv cu toroane dup o conformare rezulta-t din dimensionare. nlimea seciunilor produse la ASA sunt de 20 i 32 cm.
These products are executed with extruded concrete technology on 90 m con-tinuous tracks with cut to length according to designers needs. They are ex-ecuted of C50/60 concrete with reinforcing exclusively with strands accordingto a sizing calculation. Sections produced at ASA CONS are of 20 and 32 cm.
-
8/10/2019 Catalog ASA CONS 2014 s
75/10071
H(mm)
I(mm)
TIPCod
produsNumrtoroane
Diametrutoron (mm)
320 1200
FGP-320/A 5+2
12.9FGP-320/B 7+2
FGP-320/C 8+2
FGP-320/D 11+2
Seciune caracteristic /Specific section
Produse - Elemente de planeu intermediar /Products - Intermediate floor elements
toroane strands
toroane strands
FGP-320
1300
1200
1100
1000
900
800
700
600
500
400
300
200
100
A (7 TBP-12,90)B (9 TBP-12,90)
C (10 TBP-12,90)D (13 TBP-12,90)
6559
90510251280
45510
665765970
31011
485565740
20012
350420565
11513
245305430
14
160210325
15
135235
16
165
5 buc TBP 12.9-1860 (12.9)Pk=110 kN
7 buc TBP 12.9-1860 (12.9)Pk=110 kN
8 buc TBP 12.9-1860 (12.9)Pk=110 kN
11 buc TBP 12.9-1860 (12.9)Pk=110 kN
FGP-320/A
FGP-320/B
FGP-320/C
FGP-320/D
volum/metru: V=0.1993 m3/mlmasa/metru: M=478.32 kg/mlrost/metru: m=33.6 kg/ml
densitate/m 33: 24.00 kN/m
(section area)(volume/meter)(weight/meter)(point/meter)(total weight)
(density/m 3 )
n c r c
r i a d m
i s e , v a
l o r i c a r a c t e r
i s t i c e
P e r m
i s s i
b l e
l o a d
, c h a r a c
t e r i s t
i c v a
l u e s
[ d a N
/ m 2 ]
Deschidere Opening
-
8/10/2019 Catalog ASA CONS 2014 s
76/10072
Vedere 3D /3D view
Produse - Trepte prefabricate beton armat /Products - Precast concrete staircase
Trepte prefabricate beton armat / Precast concrete staircase
Scara prefabricat din beton armat este un element de construcie care asi-gur legtura pe vertical ntre diferite etaje ale cldirii. Dintre avantajeleprefabricrii sistemului de trepte merit menionate: dimensiunile exacte,forma perfect i identic a elementelor proiectate, gama variat de realizarea acestora n funcie de necesitile clientului, precum i reducerea timpuluide execuie pe antier prin eliminarea timpului necesar realizrii cofrajului.
The precast concrete staircase is a construction element that provides verticalconnection between different floors of the building. Among the advantages ofconcrete prefabricating system worth mentioning: size precision, perfect sha-
pe and identical elements, designed for a wide range of projects, depending oncustomer needs and reducing execution time on site by eliminating the timerequired to complete the shuttering.
-
8/10/2019 Catalog ASA CONS 2014 s
77/10073
Produse - Trepte prefabricate beton armat /Products - Precast concrete steps
d
AA
Seciuni caracteristice /Specific sections
Vedere lateral /Side view
h
ab
l
Not: dimensiunea variaz n funcie de specificul proiectului. /Note: size varies depending on the type of the project.
-
8/10/2019 Catalog ASA CONS 2014 s
78/10074
Produse - Elemente de planeu intermediar /Products - Intermediate floor elements
Predale / Filigrames
Vedere 3D /3D view
Lungimea poate varia de la 2 la 8 m. /Lenght can vary between 2 and 8 m.
Sunt elementele componente pentru planee la care prin suprabetonare serealizeaz o structur cu planeu mixt. Acestea au rol de cofraj i de obiceitrebuie sprijinite pe durata turnrii i maturizrii suprabetonrii.
These products are component elements for floors whereat by over concretingis achieved a monolith floor. These elements have formwork function and usu-ally must be supported during casting period and over concreting maturation.
-
8/10/2019 Catalog ASA CONS 2014 s
79/10075
Produse - Elemente de planeu intermediar /Products - Intermediate floor elements
Seciune caracteristic /Specific section
suprafa rugoasrough surface
suprafa rugoasrough surface
-
8/10/2019 Catalog ASA CONS 2014 s
80/10076
Produse - Panouri de faad i grinzi de soclu /Products - Facade panels and cap beams
Panourile prefabricate pot fi interioare de tip antifoc i exterioare de tiptristrat. Acestea la rndul lor sunt panouri de soclu i panouri curente. Di-mensiunile panourilor sunt limitate de posibilitatea manipulrii i trans-portului. Fixarea lor de structur se face cu mbinri sudate sau nurubate.
Precast panels can be interiors type fire resistant and exteriors type tri layerwhich at their turn can be socle panels and current panels. The dimensions ofthe panel are limited by the possibility of manipulation and transport. The set-ting with the structure is made by screwed or welded joints.
Not: vezi i panourile grafice de la pagina 66.Note: see also the graphic panels on page 66.
Vedere 3D /3D view
Panouri de faad monostrat i tristrat - beton aparent / Monolayer and trilayerconcrete facade panels - exposed concrete
-
8/10/2019 Catalog ASA CONS 2014 s
81/10077
Produse - Panouri de faad i grinzi de soclu /Products - Facade panels and cap beams
Tip/mrime H max L max b1 t b2
Panou tristrat 4.8 m 15 m 12-16 cm 6-8 cm 7-10 cm
Panou monostrat 4.8 m 15 m 12-35 cm - -
Seciuni caracteristice /Specific sections
Dimensiuni /Dimensions
Vedere lateral /Side view
-
8/10/2019 Catalog ASA CONS 2014 s
82/10078
Lungimea poate varia de la 6 la 15 m. /Lenght can vary between 6 and 15 m.
Grinzile de planeu servesc ca suport pentru plcile constituen-te ale planeului. Pe aceste elemente se pot rezema fii cu go-luri, predale i alte elemente de planeu. Prin alctuirea acestor ele-mente se poate asigura continuarea pe reazeme n suprabetonare.
Floor beams are used as support for constituent slabs of the floor. On theseelements hollow core slabs, filigrames and other floor elements can be rest.Using floor beams, bearings extension in over concreting can be assured.
Vedere 3D /3D view
Produse - Elemente de planeu intermediar /Products - Intermediate floor elements
Grinzi de planeu / Floor beams
-
8/10/2019 Catalog ASA CONS 2014 s
83/10079
Produse - Elemente de planeu intermediar /Products - Intermediate floor elements
a b
0.40-0.80 0.40-0.80
Seciune caracteristic /Specific section
Dimensiuni /Dimensions
Vedere lateral /Side view
a
b
-
8/10/2019 Catalog ASA CONS 2014 s
84/10080
Produse - Elemente de planeu intermediar /Products - Intermediate floor elements
Elemente TT /TT elements
Acest tip de elemente se folosete pentru planee ncrcate cu sarcini maripn la deschideri de 17 m. Capacitatea portant a acestora se proiecteazdup necesiti prin dimensionarea suprabetonrii. Variaia dimensionrilorse poate asigura prin limea plcii laterale, respectiv nlimea i limeanervurilor.
This type of elements are used for slabs loaded with high loads up to 17 mspans. Their bearing capacity is designed according to requirements by dimen-sioning of the over concreting. The variation of the correct dimensioning canbe assured by the width of side slab, respectively height and width of the ribs.
Vedere 3D /3D view
Lungimea poate varia de la 6 la 17 m. /Lenght can vary between 6 and 17 m.
-
8/10/2019 Catalog ASA CONS 2014 s
85/10081
Produse - Elemente de planeu intermediar /Products - Intermediate floor elements
Seciune caracteristic /Specific section
Vedere lateral /Side view
-
8/10/2019 Catalog ASA CONS 2014 s
86/1008282
-
8/10/2019 Catalog ASA CONS 2014 s
87/10083
Infrastructur - produse
Infrastructure - products
-
8/10/2019 Catalog ASA CONS 2014 s
88/10084
Grinzi de pod 42 i 52 cm /Bridge beams 42 and 52 cm
Produse - Grinzi de pod /Products - Bridge beams
Lungimea poate varia de la 10 la 12 m. /Lenght can vary between 10 and 12 m.
Vedere 3D /3D view
Grinzile de pod sunt asimilate din gama de produse IPTANA pentru diferitedeschideri i sarcini, cu seciune I i T, cu deschideri ntre 10 i 12 metri. Pro-dusele fiind de catalog, suport modificri i adaptri n limita acceptrii aces-tora de ctre proiectani.
Bridge beams are assimilated from the IPTANA products range for variousspans and loads, with I and T sections, with spans between 10 and 12 meters.
As catalogue products can be modified and adapted in the acceptance limitof the designers.
-
8/10/2019 Catalog ASA CONS 2014 s
89/10085
Produse - Grinzi de pod /Products - Bridge beams
Dispunere toroane /Strands layoutSeciune caracteristic /Specific sectionSeciune transversal /Cross section
Dimensiuni /Dimensions
L (m) ncrcare admis
Valoare caracteristic(kN/ml)
6 61
8 3610 23
L (m) ncrcare admis
Valoare caracteristic(kN/ml)
10 30
12 19.5
19 1922
5
2
5
7
7
0 2
5
531521
52 60
5
14
5 4 2
5
3
5
0 3
5
3
5 5 5 5 5 5 5 56 644
60
7 4 4 7
22
5
7 4 4 722
5 5 5 5 5 5 56 644
60
19 1922
53152
152
60
5 5
5
2
5
7
7
0 2
5 1
2 5
5
3
5
0 4
5
3
Grind de pod 42 / 42 Bridge beam Grind de pod 52 / 52 Bridge beam
-
8/10/2019 Catalog ASA CONS 2014 s
90/10086
Grinzi de pod 72 i 80 cm /Bridge beams 72 and 80 cm
Lungimea poate varia de la 14 la 18 m. /Lenght can vary between 14 and 18 m.
Vedere 3D /3D view
Produse - Grinzi de pod /Products - Bridge beams
Grinzile de pod sunt asimilate din gama de produse IPTANA pentru diferitedeschideri i sarcini, cu seciune I i T, cu deschideri ntre 12 i 18 metri. Pro-dusele fiind de catalog, suport modificri i adaptri n limita acceptrii aces-tora de ctre proiectani.
Bridge beams are assimilated from the IPTANA products range for variousspans and loads, with I and T sections, with spans between 12 and 18 meters.
As catalogue products can be modified and adapted in the acceptance limitof the designers.
-
8/10/2019 Catalog ASA CONS 2014 s
91/10087
R = 5 R = 5
92
851 125 25
R = 5 R = 5
Produse - Grinzi de pod / Products - Bridge beams
Dispunere toroane /Strands layoutSeciune caracteristic /Specific sectionSeciune transversal /Cross section
Dimensiuni /Dimensions
L (m) ncrcare admis
Valoare caracteristic(kN/ml)
14 40.5
16 25.5
92
851 1 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
25 25
3 5
8 0
5 8
4 8 8 2
8 5
2 5
5
3
3 5
8
335 335
102 42 429102
9
4 427 R =
5
R = 5
R = 5
R = 5
Grind de pod 72 / 72 Bridge beam
-
8/10/2019 Catalog ASA CONS 2014 s
92/10088
Produse - Grinzi de pod /Products - Bridge beams
Lungimea poate varia de la 18 la 24 m. /Lenght can vary between 18 and 24 m.
Vedere 3D /3D view
Grinzi de pod 93 i 103 cm /Bridge beams 93 and 103 cm
Grinzile de pod sunt asimilate din gama de produse IPTANA pentru diferitedeschideri i sarcini, cu seciune I i T, cu deschideri ntre 18 i 24 metri. Pro-dusele fiind de catalog, suport modificri i adaptri n limita acceptrii aces-tora de ctre proiectani.
Bridge beams are assimilated from the IPTANA products range for variousspans and loads, with I and T sections, with spans between 18 and 24 meters.
As catalogue products can be modified and adapted in the acceptance limitof the designers.
-
8/10/2019 Catalog ASA CONS 2014 s
93/10089
118
4
4
5 5 5 5 5
4 4 5
40 4010
R = 1 0
10
1 0 2 1 0
2 4 5
1 2
118
1 0 3
50 75 5 5 5
44
5 5 5 5 7 5
R = 2 0 R = 2 0
R = 1 0
18
Produse - Grinzi de pod /Products - Bridge beams
Dispunere toroane /Strands layoutSeciune caracteristic /Specific sectionSeciune transversal /Cross section
L (m) ncrcare admis
Valoare caracteristic(kN/ml)
18 42.5
21 27.524 21.5
L (m) ncrcare admis
Valoare caracteristic(kN/ml)
18 46.5
21 33.524 24.5
42 421010
120
16
R =
1 0
R = 2 0 78
6
1 145
47
8
2 0 1
5
9 3
5
1 2
2 1
120
5
3 9
4 4
5 5 5 5 5 5 5 5
4 5
5 5
5 5
4
Dimensiuni /Dimensions
Grind de pod 93 / 93 Bridge beam Grind de pod 103 / 103 Bridge beam
-
8/10/2019 Catalog ASA CONS 2014 s
94/10090
Lungimea poate varia de la 30 la 41 m. /Lenght can vary between 30 and 41 m.
Vedere 3D /3D view
Vedere de sus /Top view
Vedere lateral /Side view
Grinzi de pod 150 cm /Bridge beams 150 cm
Grinda de pod cu seciune I este un proiect propriu, conceput de ctre proiec-tanii notri de specialitate, pentru nlime de 1.50 m i deschideri cuprinse ntre 30 i 41 m.
The I section bridge beam is an original project designed by our expert design-ers, for a height of 1.50 m and openings varying between 30 and 41 m.
Produse - Grinzi de pod /Products - Bridge beams
-
8/10/2019 Catalog ASA CONS 2014 s
95/10091
Dispunere toroane /Strands layoutSeciune caracteristic /Specific sectionSeciune transversal /Cross section
L (m) Greutate (tone)/buc
30 37.45
41 51.18
Dimensiuni /Dimensions
Produse - Grinzi de pod /Products - Bridge beams
-
8/10/2019 Catalog ASA CONS 2014 s
96/10092
Vedere 3D /3D view
Canivouri din beton armat / Reinforced concrete channel elements
Acest tip de elemente prefabricate din beton se folosete pentru protejareaconductelor de ap, liniilor electrice i brei optice din subteran. Se pot realizacarosabile sau necarosabile, drepte sau curbe, simple sau duble, n funcie desolicitarea clientului.
This type of precast concrete elements is used for protection of undergroundwater pipes, electric cables and ber optic lines. The elements can be executed
for carriage way or non-carriage way, straight or curved, single or double, de- pending on customers request.
Produse - Canivouri /Products - Channel elements
-
8/10/2019 Catalog ASA CONS 2014 s
97/10093
d
a b a
c
e
a
a
aba
c
Seciune caracteristic /Specific sectionSeciune transversal /Cross section
ab ba a
e
a
c
ad
ab ba ac
Produse - Canivouri /Products - Channel elements
Not: dimensiunea variaz n funcie de specificul proiectului. /Note: size varies depending on the type of the project.
-
8/10/2019 Catalog ASA CONS 2014 s
98/1009494
-
8/10/2019 Catalog ASA CONS 2014 s
99/100
-
8/10/2019 Catalog ASA CONS 2014 s
100/100
top related