cartagena el batel auditorium project in polycarbonate and pmma
Post on 18-Jun-2015
909 Views
Preview:
DESCRIPTION
TRANSCRIPT
Cartagena Auditorium “El Batel” by Jose Selgas & Lucia Cano Selgascano
WWW.DIGIPLASTICS.CO.UK
1
2
DARING NEW LIMITS FOR POLYCARBONATE
When the international architect firm Selgascano had to implement their daring façade coverage, no standard supplier was capable to satisfy their requirements.
Ultimately it was the Italian firm, Giplast-Polipiu Plast of Milan, that was capable to fulfill their extreme design. Digiplastics is proud to support the promotion of Giplast-Polipiu Plast. El Batel, Cartagena Spain auditorium and convention center
3
PMMA colored extruded tubes
The main hall is constructed on the exterior like a concrete box clad, with PMMA tubes that gives it a scored, horizontal texture. These tubes, which recall the facade of the J. wax headquarter by F.L.Wright, are also used to construct the luminous pergolas of the terraces on the top floor.
4
Custom made extrusion shapes
...Natural light inundate the space Through a double facade of transparent Metacrilate slats, with fine colored lines injected during their extrusion...
5
Shading PC sheets
The majority of the facade and interior surfaces are finished with extruded methacrylate or polycarbonate slats whose sections were carefully designed by the architects.
Digiplastics +44 (0)2032891985 +39 349-052-9852 +1 608 359 1750 Info@Digiplastics.co.uk Info@ip-plastic.com Info provided courtesy of tectonica-online.com: Tectonica-Online is a new web site for the Architecture and Construction. Find a brief user’s guide of tectonica-online, where the construction analysis of the El Batel Auditorium project is included, that will give you an idea of the many possibilities offered bythis new web site of Architecture and Construction: http://www.tectonica-online.com/guide/
6
top related