camedia c 3000 engl
Post on 10-Apr-2018
214 Views
Preview:
TRANSCRIPT
-
8/8/2019 Camedia c 3000 Engl
1/86
-
8/8/2019 Camedia c 3000 Engl
2/86
152
You can play movies you have recorded. will appear on the LCDmonitor for movies.
Set the Mode dial to . The LCD monitor turns on
automatically.
Display a picture with onthe LCD monitor using the
Jog dial. Picture information is displayed
for 5 seconds. Press the Eraseor Menu button to display thepicture information again.
Press the Menu button todisplay the Menu.
Press the top/bottom arrowson the Jog dial to selectMOVIE PLAY. To cancel, press the Menu
button.
Press the right arrow on theJog dial to select START.
Press the OK button to startthe movie. The card access lamp blinks
for a moment, then the moviestarts.
6
5
4
3
2
1P A / S / MO F F
P O W E R / M O
D ED
I A L
PLAYING MOVIES
MOVIEPLAY
CARDSETUP
START
[ 1 / 1 ] 2 4MODESETUP
FUNCTION
INFO
3
542 1
6
-
8/8/2019 Camedia c 3000 Engl
3/86
153
Press the OK button duringthe movie to pause it. Press itagain to restart. The following operations can
be performed during pause.Press the top arrow on the Jogdial to pause at the beginningof the movie. Press the bottomarrow to pause at the ending ofthe movie.Press the right arrow on theJog dial to start the movie.Press the left arrow to play itbackwards.
Press the Menu button whenmovie playback is finished.The Menu reappears. Press itagain to exit the Menu.
8
7
12.23.00 21:56 24
HQ
Note:
Sound cannot be played back by this camera. Connect it to a TV orpersonal computer for sound playback.(p. 124)
87
-
8/8/2019 Camedia c 3000 Engl
4/86
154
PICTURE INFORMATIONYou can display picture information (settings, date/time, file number, etc.)on the LCD monitor.
Set the Mode dial to .
Press the Menu button todisplay the Menu.
Press the top/bottom arrowsto select INFO. To cancel, press the Menu
button.
Press the right arrow on theJog dial, then press the
top/bottom arrows to selectON.
Press the left arrow on theJog dial to confirm the setting.
Press the OK button to savethe setting and cancel theMenu.
6
5
4
3
2
1P A / S / MO F F
P O W E R / M O
D ED
I A L
[ 1 / 1 ] 2 4
MOVIEPLAY
CARDSETUPMODESETUP
FUNCTION
INFO OFFON
2
543 1
6
-
8/8/2019 Camedia c 3000 Engl
5/86
155
HQSIZE: 320 240
0" / 100"12.23. ,00 21:56
Sound record
Protect
Movie pictureBattery check
Recording modeImage size
White balance
Date/TimeSeconds
During movie recording
FILE: 123-3456
Movie pictureBattery check
File name
When a movie picture is selected
Note: When picture information is displayed, the frame number will not be
displayed. Unless OFF is selected in All Reset, the setting will be canceled when the
power is turned off. (p. 194) The information is displayed for a period of 5 seconds.
-
8/8/2019 Camedia c 3000 Engl
6/86
156
FUNCTIONSThese functions enable you to create an index of recorded images and toedit images.
CREATING AN INDEXRecorded movies can be displayed as an index. After an index iscreated, it can be saved on the card as a still picture image.
Set the Mode dial to .
Using the Jog dial, display an
image with the mark onthe LCD monitor.
Press the Menu button todisplay the Menu.
Press the top/bottom arrowson the Jog dial to selectFUNCTION.
After pressing the right arrowon the Jog dial, press thetop/bottom arrows to selectMOVIE INDEX, then press theOK button.
Press the right/left arrows onthe Jog dial to select the firstframe for the index display,then press the OK button. If the top arrow on the Jog dial
is pressed, the first frame isdisplayed, and if the bottomarrow is pressed, the lastframe is displayed. When thefirst frame is selected, thedisplayed images other thanthe last frame will changeaccordingly.
6
5
4
3
2
1P A / S / MO F F
P O W E R / M O
D ED
I A L
[ 1 / 1 ] 2 4
MOVIEPLAY
CARDSETUPMODESETUP
FUNCTION
INFO
MOVIEINDEXMOVIEEDIT
3
765
42
1
8
-
8/8/2019 Camedia c 3000 Engl
7/86
157
The total movie time and timeof the current frame willappear in the left corner on the
LCD monitor. To go to the next frame, pressthe right arrow on the jog dialand to go the previous frame,press the left arrow.
Press the right/left arrows onthe Jog dial to select the lastframe for the index display. Just as when the first frame is
selected, the image can beselected by using the Jog dial.When the last frame isselected, the displayed imagesother than the top frame willchange accordingly.
Press the Menu button to go toback to first frame selection.
Press the OK button to recordthe index image in the cardand cancel the Menu. The index image wi l l be
recorded in the correspondingmode listed below.HQ [ SQ2 (1024 x 768/HIGH)SQ [ SQ2 (640 x 480/HIGH)
8
7CANCEL OK
0" / 88"
0" / 88"
CANCEL OK
Note: The index can be displayed in 9 frames only.
-
8/8/2019 Camedia c 3000 Engl
8/86
158
FUNCTIONS (Cont.)
EDITING A MOVIEThis function is used to delete unnecessary portions of recorded moviesor to split one movie into two.
Set the Mode dial to .
Using the Jog dial, display animage with the mark on
the LCD monitor.
Press the Menu button todisplay the Menu.
Press the top/bottom arrows
on the Jog dial to selectFUNCTION.
After pressing the right arrowon the Jog dial, press thetop/bottom arrows to selectMOVIE EDIT, then press theOK button.
5
4
3
2
1P A / S / MO F F
P O W E R / M O
D ED
I A L
[ 1 / 1 ] 2 4
MOVIEPLAY
CARDSETUPMODESETUP
FUNCTION
INFO
MOVIEINDEXMOVIEEDIT
3
876
542
1
9
-
8/8/2019 Camedia c 3000 Engl
9/86
159
Press the right/left arrows onthe Jog dial to select the first
frame, then press the OKbutton. If the top arrow on the Jog dial
is pressed, the first frame ofthe movie is displayed, and ifthe bottom arrow is pressed,the last frame is displayed.
Press the right/left arrows onthe Jog dial to select the lastframe, then press the OKbutton. Just as when selecting the top
frame, the top/bottom arrowson the Jog dial can be used toselect the frame.
Press the right/left arrows onthe Jog dial to select NEW orERASE. If NEW is selected, the edited
movie is saved as a newmovie with a different name.
If ERASE is selected, theedited movie is saved under
the original name. The originalmovie is discarded.
Press the OK button to recordthe movie and cancel theMenu.
9
8
7
60" / 88"
CANCEL OK
0" / 88"
CANCEL OK
NEW ERASE
-
8/8/2019 Camedia c 3000 Engl
10/86
160
CARD SETUP
ALL-FRAME ERASE
Set the Mode dial to .
Display a picture with onthe LCD monitor using theJog dial.
Press the Menu button todisplay the Menu.
Press the top/bottom arrowson the Jog dial to select CARDSETUP.
Press the right arrow on theJog dial, then press thetop/bottom arrows to select
.
Press the OK button to display.YES NO
6
5
4
3
2
1
1
76
542P
A / S / MO F F
P O W E R / M O
D ED
I A L
3
[ 1 / 1 ] 2 4
MOVIEPLAY
CARDSETUPMODESETUP
FUNCTION
INFO
YES NO
-
8/8/2019 Camedia c 3000 Engl
11/86
Press the OK button with YESselected to erase all the
pictures in the card. To cancel, select NO using theright arrow on the jog dial.
When complete, NO PICTUREappears on the LCD monitor. Protected frames will remain in
the card, and the last frame willbe displayed. (p. 112)
8
7
161
Caution: Be careful not to erase important picture data by mistake as it cannot
be retrieved. Never open the card cover, eject the card, remove the batteries, or pull
the plug while erasing pictures. It may destroy the data in the card.
When a write-protect adhesive seal is placed on the card, the cameradoes not enter the Erase mode.
-
8/8/2019 Camedia c 3000 Engl
12/86
CARD FORMATYou can format the card.
Set the Mode dial to .
Display a picture with onthe LCD monitor using theJog dial.
.
Press the Menu button todisplay the Menu.
Press the top/bottom arrowson the Jog dial to select CARDSETUP.
Press the right arrow on the
Jog dial, then press thetop/bottom arrows to select.
Press the OK button todisplay .
Press the OK button againwith YES selected to formatthe card. To cancel, select NO using the
right arrow on the Jog dial andpress the OK button.
When complete, NO PICTUREappears on the LCD monitor.
8
7
YES NO
6
5
4
3
2
1
162
CARD SETUP (Cont.)
1
76
542P
A / S / MO F F
P O W E R / M O
D ED
I A L
[ 1 / 1 ] 2 4
MOVIEPLAY
CARDSETUPMODESETUP
FUNCTION
INFO
3
YES NO
-
8/8/2019 Camedia c 3000 Engl
13/86
163
Note: Formatting the card erases the existing data, including pictures which
have been write-protected from the camera. Be careful not to eraseimportant data when formatting a recorded card.
Formatting will not be engaged when a write-protect adhesive seal isplaced on the card.
Non-Olympus brand cards or cards formatted from or used in a computermust be formatted by the camera. These cards may take longer to recordthan recommended Olympus brand cards.
It is highly recommended that you confirm the contents before formatting.
-
8/8/2019 Camedia c 3000 Engl
14/86
164
-
8/8/2019 Camedia c 3000 Engl
15/86
OL Y MP
U S D I GI T A L
C A M
E R A
4STORING DATA FORPRINTING PICTURES
Recorded images can be printed out with a printer. Selected images can be reserved in a SmartMedia
card for printing on a printer or at a photo lab thatsupports the DPOF (Digital Print Order Format)system.
-
8/8/2019 Camedia c 3000 Engl
16/86
166
ABOUT PRINT SETTINGSYou can make prints of images stored in a SmartMedia, using one of thefollowing methods:
1. Images in the SmartMedia can be selected for printing, as well as thenumber of copies for each and whether or not to print the date andtime with them. This information is saved in the card (Print-reserve)for later printing from a printer or at a photo lab that supports DPOF.
2. If a SmartMedia with Print-reserve data recorded in it is inserted intoan Olympus CAMEDIA P-330N/P-300 printer, printing can beperformed at the touch of a button. For more information, consult
your printers user manual.
3. Images can be transferred directly to a personal computer via USB ora PC connection kit, or by using an optional FlashPath, PC CardAdapter or USB SmartMedia Reader/Writer. Images can then beprinted on a printer connected to the personal computer using asofttware application. For more information, consult the softwaresuser manual.
About DPOFDPOF (Digital Print Order Format) is a system that allows you toselect images in a SmartMedia card to be printed as well as thenumber of copies to make of each. This information is stored in thecard for use by printers or photo labs that support this system tomake prints automatically.
-
8/8/2019 Camedia c 3000 Engl
17/86
167
Note: Images taken with this camera can also be printed using a printer or at a
photo lab that supports the Design rule for Camera File system/DCF. DPOF reservations set by another device cannot be changed by thiscamera. Make changes using the original device.
If a card contains DPOF reservations set by another device, enteringreservations using this camera may overwrite the previous reservations.
Even if an image appears with the message "PICTURE ERROR", printreserve may be performed on it. In such a case, the print reserve icon( ) does not appear on the screen where an image is displayed for fullview. Since appears on the screen where multiple images aredisplayed (index-display mode), it is possible to confirm the print reservestatus.
This camera cannot be directly connected to printers such as theOlympus P-300 digital printer.
Not all functions may be available on all printers or at all photo labs.
-
8/8/2019 Camedia c 3000 Engl
18/86
You can store data for making prints with a printer or at a lab thatsupports this system.
ALL-FRAME PRINT RESERVEYou can store data for printing all the pictures in the card as well aschoose the number of prints to make.
Set the Mode dial to .
Press the Print button to
display the Print reservesetting screen. If Print-reserve data is already
stored in the card, a screenwill appear giving you thechoice of resetting the data orkeeping it. (p. 177)
Select using the Jog dial,then press the OK button. The print number and date
setting screen is displayed.
Press the top/bottom arrowson the Jog dial to select .
4
3
2
1
168
PRINT-RESERVE
1
2
8
76
543 P A / S / MO F F P
O W E R / M O D E
D I A L
CANCEL
PRINT ORDER
SET OK
-
8/8/2019 Camedia c 3000 Engl
19/86
Press the left/right arrows onthe Jog dial to enter thenumber. Press the left arrow to decrease
the number, and the right arrowto increase it.
The number of prints can beset from 0 to 10.
Press the top/bottom arrowson the Jog dial to select .
Press the left/right arrows onthe Jog dial to select DATE,TIME or NO.
Press the OK button. The Menu screen disappears
and the print reserve indicator
and the number of prints aredisplayed on the screen.
8
7
6
5
169
Note: The setting will remain until it is readjusted. If you are printing using the P-330N or P-330, only the first 255 images
can be printed. Print reserve may take considerable time in some cases.
: 1
: DATE TIME NO
CANCEL SET OK
-
8/8/2019 Camedia c 3000 Engl
20/86
SINGLE-FRAME PRINT RESERVEYou can store data for making prints with a printer or at a lab thatsupports this system.
Set the Mode dial to anddisplay a still picture.
Press the Print button todisplay the Print reserve
setting screen. If Print-reserve data is already
stored in the card, a screenwill appear giving you thechoice of resetting the data orkeeping it. (p. 177)
Press the top/bottom arrows
on the Jog dial to select ,then press the OK button. The Print reserve set ting
screen is displayed. If thezoom lever is pressed towardT, printing with trimming isavailable. (p. 174)
3
2
1
170
PRINT-RESERVE (Cont.)
1
6
CANCEL
PRINT ORDER
SET OK
P A / S / MO F F
P O W E R / M O
D ED
I A L
6543
2
-
8/8/2019 Camedia c 3000 Engl
21/86
Press the arrows on the Jogdial to select the image you
would like to print. Left arrow: Displays the imagein the previous frame.Right arrow: Displays theimage in the next frame.Top arrow: Displays the image10 frames back.Bottom arrow: Displays theimage 10 frames forward.
Press the Zoom lever towardW to display an index ofimages.Left arrow: Moves to theprevious frame.Right arrow: Moves to the nextframe.Top arrow: Displays theprevious page.Bottom arrow: Displays thenext page.The index is displayed asfollows: when the number offrames shown in the Index-Display mode (p. 211) is 4, 9or 16 frames, then 2, 6 or 12
frames are displayedrespectively.
Press the OK button todisplay the setting menu.
Press the top/bottom arrowson the Jog dial to select .
6
5
4
171
1234 1235 1236
1237 1238 1239
CANCEL SET OK
Print reserve selection screen
CANCEL SET OK
: 1
: DATE: YES
TIME NO
NO
HQ
6453
x10
CANCEL SET OK
-
8/8/2019 Camedia c 3000 Engl
22/86
172
PRINT-RESERVE (Cont.)
Press the left/right arrows onthe Jog dial to enter the
number of prints. Press the lef t a rrow todecrease the number, and theright arrow to increase it.
The number of prints can beset from 0 to 10.
If the number of prints hasalready been set for theselected image, the previouslyset number is displayed.
Press the top/bottom arrowson the Jog dial to select .
Press the left/right arrows onthe Jog dial to select DATE,TIME or NO.
Press the top/bottom arrowson the Jog dial to select .
Press the left/right arrows onthe Jog dial to select YES orNO. If trimming is not set, YES
cannot be selected. Refer to Trimming Print
Reserve for setting trimming.(p. 174)
11
10
9
8
7P
A / S / MO F F
P O
W E R / M O D
ED
I A L
1110987
CANCEL SET OK
: 1
: DATE: YES
TIME NONO
CANCEL SET OK
: 1
: DATE: YES
TIME NO
NO
-
8/8/2019 Camedia c 3000 Engl
23/86
173
Note: Images taken with this camera can be printed using a printer or at a lab
that supports the Design rule for Camera File system/DCF. If you are printing using the P-330N or P-330, only the first 255 images
can be printed. Print reserve may take considerable time in some cases.
Press the OK button. The Menu screen disappears
and the print reserve indicatorand the number of prints aredisplayed on the screen.
To set print reserve for moreimages, repeat steps 4through 12.
Press the Print button to exit
the Print reserve mode andreturn to the Display mode.
13
12P A / S / MO F F
P O
W E R / M O D
ED
I A L
13
12
-
8/8/2019 Camedia c 3000 Engl
24/86
TRIMMING PRINT RESERVEYou can print an enlarged part of a recorded picture.
Select PRINT ORDER ,then press the OK button. ThePrint reserve selection screenappears. (p. 170)
Press the arrows on the Jogdial to display the image youwant to print. Left arrow: Displays the image
in the previous frame.Right arrow: Displays theimage in the next frame.Top arrow: Displays the image10 frames back.Bottom arrow: Displays theimage 10 frames forward.
Press the zoom lever toward Tto display the Trimming modescreen. The selected item is displayed
in green.
Move the cursor to set the topleft corner of the image you
would like to print. Move the cursor up and downby pressing the top/bottomarrows on the Jog dial, andmove it left and right bypressing the left/right arrows.
Press the zoom lever towardW to move the cursor to thetop left edge of the image, andpress it toward T to move it tothe bottom right edge.
4
3
2
1
174
PRINT-RESERVE (Cont.)
3
1
P A / S / MO F F
P O W E R / M O
D ED
I A L
642
875
Trimming mode display
HQ
6453
x10
CANCEL SET OK
-
8/8/2019 Camedia c 3000 Engl
25/86
175
When the position is set,press the OK button.
Move the cursor to set thebottom right corner of theimage that you would like toprint. Use the same procedure as in
step 4. Press the Print button to go
back to the upper left corner
setting screen.
Press the OK button to set thetrimming size. The image isdisplayed on the LCD monitor.
Press the OK button again todisplay the Single-frame printreserve screen. Following the procedure for
Single-frame print reserve, setthe number of prints, date/time,and trimming. (p. 170)
If you would like to continue totrim other images, repeat theabove procedure from steps 1to 8.
8
7
6
5
OKCANCEL SET OK
Displayed for 1 second.
When the setting is finished, the
image and frame are displayed for1 second, then the PRINTORDER menu reappears.
-
8/8/2019 Camedia c 3000 Engl
26/86
176
PRINT-RESERVE (Cont.)Note: The size of the printed image will vary depending on the print reserve
settings. An image trimmed to a small size will have lower resolution. For best results with close-up prints, it is recommended to use the TIFF,
SHQ or HQ mode. The vertical to horizontal ratio in the trimming screen can be changed
using the Jog dial, but if the zoom lever is used, the ratio is fixed at 4:3.
-
8/8/2019 Camedia c 3000 Engl
27/86
177
RESETTING PRINT RESERVEThis resets all the print reserve settings for images saved in a card.
Set the Mode dial to anddisplay a still picture.
Press the Print button todisplay the Print order settingscreen. If there are no images in the
card, this screen is notdisplayed.
Press the left/right arrows onthe Jog dial to select RESET,then press the OK button. To keep the print order, select
KEEP and press the OKbutton.
To remove the selected imageonly, set the number of prints inSingle-frame print reserve to 0.
3
2
1
Note:
If RESET is selected, the print reserve will be canceled for all the imagesin the card.
PRINT ORDER SETTING
PRINT ORDERED
RESET KEEP
CANCEL SET OK
P A / S / MO F F
P O W E R / M O
D ED
I A L
13
2
-
8/8/2019 Camedia c 3000 Engl
28/86
178
-
8/8/2019 Camedia c 3000 Engl
29/86
5USING A
PERSONAL
COMPUTER
OL Y MP
U S D I GI T A L
C A M
E R A
-
8/8/2019 Camedia c 3000 Engl
30/86
180
COMPUTER SYSTEM REQUIREMENTSWhen using the provided utility software:Personal computers used with this camera must conform to the followingminimum standards.
To connect this camera directly to a personal computer, it must haveeither a serial port or USB port.
WindowsCPU: Pentium or laterOS: Windows 98/98 Second Edition/2000 Professional (USB)
Windows 95/98/98 Second Edition/2000 Professional/NT 4.0 SP3or later
Available HD space: 100MB or moreRAM: 32MB or more (64MB or more recommended)Connectors: USB port (USB connection)
RS-232C port (serial connection)D-SUB 9-pin connector (serial connection)
Monitor: Thousands of colors recommendedMinimum monitor resolution: 800 x 600 pixelsQuickTime 4.0 must be installed to play back movies.
Note: USB support is not available under the following environments, even for
PCs equipped with a USB port.Windows 98 upgrade (from Windows 95)Windows 95Windows NT 4.0
To record or play back sound, a sound card and a microphone arerequired.
-
8/8/2019 Camedia c 3000 Engl
31/86
181
INSTALLING PROVIDEDSOFTWARE
To take full advantage of a wide range of functions, including download,display, storage and panorama, your Olympus digital camera comes with
software applications and CAMEDIA Master. For installation andoperation, please refer to the softwares online documentation.QuickTime 4.0 must be installed on the computer to play back movies.
Apple MacintoshCPU: PowerPCOS: Mac OS 8.6 to 9 (USB)
Mac OS 7.6.1 to 9 (serial)Available HD space: 100MB or moreRAM: 32MB or more (8MB or more free memory for the included
application)Connectors: USB port
Serial portMonitor: Thousands of colors recommendedMinimum monitor resolution: 800 x 600 pixelsQuickTime 4.0 must be installed to play back movies.
Note: For USB connection, your Macintosh must have a USB port. To record sound, microphone is required.
-
8/8/2019 Camedia c 3000 Engl
32/86
-
8/8/2019 Camedia c 3000 Engl
33/86
183
USING A PERSONALCOMPUTER
Make sure that the power of the personal computer and thecamera are OFF.
Connect the provided USB cable or optional RS-232C PC serialcable to your computer. (See the previous page for details)
Remove the lens cap, and connect the cable to the camerasUSB connector or computer connector, then turn on yourcomputer.
Set the Mode dial on the camera to .
Start CAMEDIA Master on the computer.5
4
3
2
1
Note: If you are using a USB cable to make connections, make sure that your
personal computer support it. Contact your personal computer makerconcerning your personal computers environment.
Communications with a personal computer cannot be accomplished witha USB cable alone. Be sure to download images using CAMEDIA Master.
If a USB connection is used, make sure that USB is operating normally on
the personal computer. For more information, consult your personalcomputers operation manual.
USB connectorComputerconnector(RS-232C)
-
8/8/2019 Camedia c 3000 Engl
34/86
184
TRANSFERRING DATA FROMSmartMedia
PC CARD ADAPTERThe picture data in the SmartMedia canbe directly transferred to a personalcomputer equipped with a PC card(PCMCIA) slot or an external PC cardreader/writer, using the optional PC CardAdapter.
FlashPath FLOPPYDISK ADAPTERThe picture data in the SmartMedia canbe directly transferred to a personalcomputer equipped with a 3.5" FDD,using the optional FlashPath FloppydiskAdapter.
SmartMedia READER/WRITERThe picture data in the SmartMedia can be directly transferred to apersonal computer (Windows 98/Mac OS 8.6) equipped with a USB port,using the optional SmartMedia Reader/Writer (MAUSB-1).
Note: Check for compatibility. This equipment may not function properly on all
operating systems.
Do not use a SmartMedia with a write-protect adhesive seal on a computeras it will cause errors. (Refer to the instructions of the adapters.)
-
8/8/2019 Camedia c 3000 Engl
35/86
185
USING CAMEDIA Master
VIEWING IMAGES STORED IN THE CARDON YOUR COMPUTER
You can view images stored in a SmartMedia card via CAMEDIA Master.
Start CAMEDIA Master on thecomputer.
Click on [My Camera].
A thumbnail index of storedimages will be displayed.
3
2
1
-
8/8/2019 Camedia c 3000 Engl
36/86
186
USING CAMEDIA Master (Cont.)
Place the cursor on thedesired image and double-
click on it. This will open the selectedimage.
4
TRANSFERRING DATA USING CAMEDIAMaster
CAMEDIA Master transfers images stored in the card to your computer.
Start CAMEDIA Master on thecomputer.
Select [Camera] [DownloadAll Images] on the menu bar. The computer wi ll s tar t
transferring images from the
camera to the computer.
2
1
Note You can view images using software such as graphics applications that
support JPEG like Paint Shop Pro/Photoshop, Internet browsers like
Netscape Communicator/Microsoft Internet Explorer, and CAMEDIAMaster (supplied with the camera).
-
8/8/2019 Camedia c 3000 Engl
37/86
187
PROCESSING IMAGES USINGCAMEDIA Master
You can process images (changing tones, composing, and so on) usingthe provided CAMEDIA Master or other application software.
MAKING DARK IMAGES BRIGHTSome images may come out darker than expected. You can try takingpictures again right after shooting, but may often miss the right momentfor a good picture. This is where CAMEDIA Master Instant Fix comes in.You can easily brighten images.
Place the cursor on thedesired image and double-click on it. This will display the selected
image.
1
-
8/8/2019 Camedia c 3000 Engl
38/86
188
Select [Image] [Instant Fix]
on the menu bar. This will brighten the selected
image.
2
CORRECTING BLURRY IMAGESBacklight sometimes makes the whole image blurry, and an object whichstands before the subject may be out-of-focus. Use CAMEDIA MasterSharpen when this happens to sharpen the whole image. However, youshould note that it doesnt eliminate image blur completely.
PROCESSING IMAGES USINGCAMEDIA Master (Cont.)
-
8/8/2019 Camedia c 3000 Engl
39/86
189
Place the cursor on the imageyou want to correct anddouble-click on it. This will display the selected
image.
Select [Image] [Filter] [Sharpen] on the menu bar.
Specify the degree ofsharpness either by slidingthe slide bar or inputting avalue from 1 to 9, whilecomparing Original andNew.
When the desired result isobtained, click on [OK].
4
3
2
1
-
8/8/2019 Camedia c 3000 Engl
40/86
190
This will sharpen the selectedimage.
COMPOSING IMAGES WITH TEMPLATESYou can easily compose images with templates in CAMEDIA Master.
Place the cursor on the imageyou want to compose anddouble-click on it. This will display the selected
image.
1
PROCESSING IMAGES USINGCAMEDIA Master (Cont.)
-
8/8/2019 Camedia c 3000 Engl
41/86
191
Select [Image] [TemplateSuperimpose] on the menu
bar. This will display the composewindow.
Select a template and click on[Apply]. This will display the preview
image.
When you are happy with thesample image, click on [OK]. The composed image will be
displayed.
There are a lot of functions for editing images in additions to thosementioned here. See CAMEDIA Master users manual located in theCAMEDIA Master folder for information on all available functions.
4
3
2
-
8/8/2019 Camedia c 3000 Engl
42/86
192
-
8/8/2019 Camedia c 3000 Engl
43/86
OL Y MP
U S D I GI T A L
C A M
E R A
6CAMERA
SETTINGS The settings can be adjusted in the Menu. Each
Menu (still picture record menu, still picture displaymenu, movie picture record menu and movie picturedisplay menu) has different available settings. (p.73/114/137/151)
-
8/8/2019 Camedia c 3000 Engl
44/86
194
ALL RESETClears adjustments and returns to the default settings.
Set the Mode dial to P, A/S/Mor .
Press the Menu button todisplay the Menu.
Press the top/bottom arrowson the Jog dial to selectMODE SETUP, then press theright arrow to select SETUP.
Press the OK button to displaythe Mode setting screen.
Press the top/bottom arrowson the Jog dial to select ALLRESET.
Press the right arrow on theJog dial, then press thetop/bottom arrows to selectON or OFF. When ON is selected, settings
will be canceled and reset tothe default when the power isturned off.
When OFF is selected, settingswill remain even when thepower is turned off.
Press the left arrow on theJog dial to confirm the setting.
Press the OK button to savethe setting. Press again tocancel the Menu.
8
7
6
5
4
3
2
1
(Still picture record menu)
1
84
7653
2
[ 1 / 3 ]
OFFON
CUSTOM
ALL RESET
TIFF
SQ1
SQ2
[ 3 / 3 ]
F2.8 1/800 + 2.0P
A/S/MMODE
CARDSETUP
MODESETUP SETUP
P O W E
R /
M O D
E D I A
L
P
A / S / M
O F F
-
8/8/2019 Camedia c 3000 Engl
45/86
195
Note: The setting will remain until it is readjusted.
With ON selected, the settings of the following items will becanceled and reset to the default when the power is turned off.
Aperture priority mode (p. 58),Shutter priority mode (p. 59),Manual mode (p. 61),Zoom (p. 62/133),Exposure compensation (p. 63/134),Flash modes (p. 64),Spot metering mode (p. 68),Macro mode (p. 69),
Macro + Spot metering mode (p. 70),Manual focus (p. 71/135),Sequence mode (p. 74),Selftimer/Remote control (p. 76/138),Auto bracket (p. 80),White balance (p. 82/142),ISO setting (p. 84/144),Flash correction (p .86),
Slow shutter synchronization flash (p. 88),Flash select (p. 92),Digital zoom mode (p. 96),Picture effects (p. 98/146),Sound record (p. 99)Recording mode (p. 105/149),A/S/M mode setting (p. 107),Picture information (p. 116/154),
-
8/8/2019 Camedia c 3000 Engl
46/86
When the power is turned off, the camera can revert to the settings thatyou desire. Even if the settings are changed while taking pictures, thecamera will return to the selected state when the power is turned on
again.
Set the Mode dial to P, A/S/Mor .
Press the Menu button todisplay the Menu.
Press the top/bottom arrowson the Jog dial to selectMODE SETUP, then press theright arrow to select SETUP.
Press the OK button to displaythe Mode setting screen.
Press the top/bottom arrowson the Jog dial to select ALLRESET.
Press the right arrow on theJog dial, then press the top/bottom arrows to selectCUSTOM.
Press the right arrow on theJog dial to enter customsettings.
7
6
5
4
3
2
1
196
CUSTOM SETTINGS
(Still picture record menu)
4
76543
[ 1 / 3 ]
OFFON
CUSTOM
ALL RESET
TIFF
SQ1
SQ2
[ 3 / 3 ]
F2.8 1/800 + 2.0P
A/S/MMODE
CARDSETUP
MODESETUP SETUP
P O W E
R /
M O D
E D I
A L
P
A / S / M
O F F
2
1
-
8/8/2019 Camedia c 3000 Engl
47/86
197
Press the top/bottom arrowson the Jog dial to select the
mode you would like to set.The modes that can beselected are shown in thetable on the following page.
Press the right arrow on theJog dial, then press the top/bottom arrows to select thedesired value.
Press the left arrow on theJog dial to confirm the setting. To enter more settings, repeat
steps 7, 8 and 9.
Press the OK button to exitfrom the Custom settings
screen and return to theMODE SETUP screen.
Confirm that CUSTOM isselected, then press the OKbutton to cancel MODE SETUP.Press it again to cancel theMenu. Even if the currentsettings are different from thecustom settings, the customsettings will be saved inmemory.
12
11
10
9
8
Note: The setting will remain until it is readjusted.
[ 1 / 5 ]
OFFAUTO
32mmF2.81/800
FLASHMODE
ZOOM
FNo
SHUTTER
/
11
121098 P O
W E R
/M
O D
E D I
A L
P
A / S / M
O F F
-
8/8/2019 Camedia c 3000 Engl
48/86
Flash Auto/Red-Eye Reducing/Fill-In/OffSpot/Macro Off/Spot/Macro/Spot + macro
Zoom position 32mm/50mm/70mm/96mmAperture value F2.8 ~ F11Shutter speed 1/800 ~ 16Exposure compensation 1/3 EV increments up to 2 EV.MF AF/MFMonitor (P) Off/OnDrive Single photo/Continuous photo/AF continuous photo/
Selftimer/Remote control/Auto bracketFlash exposure 1/3 EV increments up to 2 EVcompensation
Slow shutter Off/Before shutter/After shuttersynchronizing flashFlash select Main + extension/ExtensionDigital zoom Off/OnWhite balance Auto/Daylight/Overcast/Tungsten light/FluorescentISO Auto/100/200/400Function photography Off/Black and white/Sepia/White board/Black boardSound record Off/OnStill photo quality mode TIFF/SHQ/HQ/SQ1/SQ2Manual mode A/S/M
Movie image mode HQ/SQScreen information display Off/On
198
CUSTOM SETTINGS (Cont.)Items which can be set to the desired state in CUSTOM.
-
8/8/2019 Camedia c 3000 Engl
49/86
199
Set the Mode dial to P, A/S/Mor .
Press the Menu button todisplay the Menu.
Press the top/bottom arrowson the Jog dial to selectMODE SETUP, then press theright arrow to select SETUP.
Press the OK button to displaythe Mode setting screen.
Press the top/bottom arrowson the Jog dial to select .
Press the right arrow on theJog dial, then press thetop/bottom arrows to selectNORMAL, SOFT or HARD.
Press the left arrow on theJog dial to confirm the setting.
Press the OK button to savethe setting. Press again tocancel the Menu.
8
7
6
5
4
3
2
1
SHARPNESSYou can select the image sharpness.
Note: The setting will remain until it is readjusted.
(Still picture record menu)
17653 P O W
E R
/M O
D E
D I A L
P
A / S / M
O F F
[ 3 / 3 ]
F2.8 1/800 + 2.0P
A/S/MMODE
CARDSETUPMODESETUP SETUP
[ 1 / 3 ]
HARDNORMAL
SOFT
ALL RESET
TIFF
SQ1
SQ2
284
-
8/8/2019 Camedia c 3000 Engl
50/86
200
TIFF SETTINGSThis sets the resolution for the TIFF mode.
Set the Mode dial to P orA/S/M.
Press the Menu button todisplay the Menu.
Press the top/bottom arrowson the Jog dial to selectMODE SETUP, then press theright arrow to select SETUP.
Press the OK button to displaythe Mode setting screen.
Press the top/bottom arrowson the Jog dial to select TIFF.
Press the right arrow on theJog dial to select SETUP andpress OK button.
6
5
4
3
2
11
4
653
2
[ 1 / 3 ]
SETUP
ALL RESET
TIFF
SQ1
SQ2
[ 3 / 3 ]
F2.8 1/800 + 2.0P
A/S/MMODE
CARDSETUPMODESETUP SETUP
P O W E
R /
M O D
E D I
A L
P
A / S / M
O F F
-
8/8/2019 Camedia c 3000 Engl
51/86
201
Use the top/bottom arrows onthe Jog dial to select the
resolution. 2048 x 1536, 1600 x 1200,1280 x 960, 1024 x 768 or 640x 480 are available.
The compression rate for allresolutions is uncompressedTIFF.
Press the OK button to returnto the Mode setting screen. Confirm the setting using the
image in the LCD monitor.
Press the OK button to savethe setting. Press again tocancel the Menu.
9
8
7
Note: The setting will remain until it is readjusted. The greater the number of pixels, the longer the playback time, and the
smaller the number of frames that can be photographed, so exercisecaution. (p. 42/43)
TIFF
1280 X 960
1600 X1200
1024 X 768
640 X 480
2048 X1536
98
7
P O W E
R /
M O D
E D I
A L
P
A / S / M
O F F
-
8/8/2019 Camedia c 3000 Engl
52/86
202
SQ1, SQ2 SETTINGSYou can select the resolution and compression rate for SQ1 and SQ2.NORMAL quality allows more pictures to be stored in a card, while HIGHquality uses less compression, resulting in fewer visible artifacts in the
JPEG image.
Set the Mode dial to P orA/S/M.
Press the Menu button todisplay the Menu.
Press the top/bottom arrowson the Jog dial to selectMODE SETUP, then press theright arrow to select SETUP.
Press the OK button to displaythe Mode setting screen.
Press the top/bottom arrowson the Jog dial to select SQ1or SQ2, then press right arrowon the Jog dial to selectSETUP.
Press the OK button to displaythe Resolution setting screen.
Press the top/bottom arrowson the Jog dial to select theresolution. The resolutions that can be
selected are shown in thefollowing table.
7
6
5
4
3
2
11
64
753
2
[ 1 / 3 ]
SETUP
ALL RESET
TIFF
SQ1
SQ2
[3 / 3
]
F2.8 1/800 + 2.0P
A/S/MMODE
CARDSETUPMODESETUP SETUP
P O W E
R /
M O D
E D I
A L
P
A / S / M
O F F
-
8/8/2019 Camedia c 3000 Engl
53/86
Press the right arrow on theJog dial, then press the top/
bottom arrows to select HIGHor NORMAL.
Press the OK button to returnto the MODE SETUP screen. Confirm the setting using the
image in the LCD monitor.
Press the OK button to savethe setting. Press again tocancel the Menu.
10
9
8
NORMAL
HIGH (High quality)
NORMAL
HIGH (High quality)
203
Note: The setting will remain until it is readjusted. The greater the number of pixels, the longer the playback time, and the
smaller the number of frames that can be photographed, so exercisecaution. (p. 42/43)
SQ1
1280 X 960
1600 X1200
NORMALHIGH
Recording modeImage quality
SQ1
HIGH (High quality)NORMAL
HIGH (High quality)
NORMAL
SQ2
Recording size
1600 x 1200
1280 x 960
1024 x 768
640 x 480
File format
JPEG
109
8
P O W E
R /
M O D
E D I
A L
P
A / S / M
O F F
-
8/8/2019 Camedia c 3000 Engl
54/86
204
BEEP SOUNDYou can select the volume of the operating beep sound.
Set the Mode dial to P, A/S/M,or .
Press the Menu button todisplay the Menu.
Press the top/bottom arrowson the Jog dial to selectMODE SETUP, then press theright arrow to select SETUP.
Press the OK button to displaythe Mode setting screen.
Press the top/bottom arrowson the Jog dial to select .
Press the right arrow on theJog dial, then press thetop/bottom arrows to selectHIGH, LOW or OFF.
Press the left arrow on theJog dial to confirm the setting.
Press the OK button to savethe setting. Press again tocancel the Menu.
8
7
6
5
4
3
2
1
Note: The setting will remain until it is readjusted.
(Still picture record menu)
17653
2
[ 2 / 3 ]
REC VIEW
FULL-TIME AF
FILE NAME
OFFLOWON
[ 3 / 3 ]
F2.8 1/800 + 2.0P
A/S/MMODE
CARDSETUPMODESETUP SETUP
P O W E
R /
M O D
E D I
A L
P
A / S / M
O F F
84
-
8/8/2019 Camedia c 3000 Engl
55/86
205
FULL-TIME AFFull-time AF keeps the image on the LCD monitor in focus at all timeswithout having to press the Shutter release button.
Set the Mode dial to P orA/S/M.
Press the Menu button todisplay the Menu.
Press the top/bottom arrowson the Jog dial to selectMODE SETUP, then press theright arrow to select SETUP.
Press the OK button to displaythe MODE SETUP screen.
Press the top/bottom arrowson the Jog dial to select FULL-
TIME AF.
Press the right arrow on theJog dial, then press thetop/bottom arrows to selectON or OFF. ON: Always maintains focus
automatically.
OFF: Turns off Full-time AF.The camera wont focus untilyou press the Shutter releasebutton halfway.
6
5
4
3
2
1
(Still picture record menu)
1
653
2
[ 2 / 3 ]
OFFONREC VIEW
FULL-TIME AF
FILE NAME
[ 3 / 3 ]
F2.8 1/800 + 2.0P
A/S/MMODE
CARD
SETUPMODESETUP SETUP
P O W E
R /
M O D
E D I
A L
P
A / S / M
O F F
4
-
8/8/2019 Camedia c 3000 Engl
56/86
206
FULL-TIME AF (Cont.)
Press the left arrow on theJog dial to confirm the setting.
Press the OK button to savethe setting. Press again tocancel the Menu.
8
7
Note: Using Full-time AF will drain the battery more quickly.
Full-time AF is not available when the LCD monitor is turned off. The setting will remain until it is readjusted.
7 P O W E R
/M
O D
E D I
A L
P
A / S / M
O F F
8
-
8/8/2019 Camedia c 3000 Engl
57/86
207
REC VIEWRec view lets you select whether to display the image after recording.Rec check lets you check the image and decide whether or not to save it.
Set the Mode dial to P, A/S/Mor .
Press the Menu button todisplay the Menu.
Press the top/bottom arrowson the Jog dial to selectMODE SETUP, then press theright arrow to select SETUP.
Press the OK button to displaythe Mode setting screen.
Press the top/bottom arrowson the Jog dial to select REC
VIEW.
Press the right arrow on theJog dial, then press the top/bottom arrows to select ON,OFF or CHECK. When OFF is selected, the
image will not be displayed onthe LCD monitor after i t is
recorded. When ON is se lec ted , the
image will be displayed on theLCD monitor after i t isrecorded.
When CHECK is selected, theimage will be displayed after itis taken and a confirmationscreen will be displayed toallow you to keep or discard it.
6
5
4
3
2
1
(Still picture record menu)
1653
2
[ 3 / 3 ]
F2.8 1/800 + 2.0P
A/S/MMODE
CARDSETUPMODESETUP SETUP
P O W E
R /
M O D
E D I
A L
P
A / S / M
O F F
4
[ 2 / 3 ]
OFFON
CHECK
REC VIEW
FULL-TIME AF
FILE NAME
-
8/8/2019 Camedia c 3000 Engl
58/86
-
8/8/2019 Camedia c 3000 Engl
59/86
209
Use the Jog dial to select animage.
Press the OK button to savethe image. The next image inmemory will appear. If sound is recorded with a still
image, it will be played afterthe OK button is pressed. Theimage will be stored in thecard after it is finished.
Press the Erase button todiscard the image. The One-Frame erase screen appears.
Press the left/right arrows onthe Jog dial to select YES,then press the OK button todiscard the image on the LCDmonitor. The next image willappear. To cancel, press the Erase
button or select NO using theleft/right arrows on the Jog dialand press the OK button. TheSave confirmation screen willreappear. If you turn off thecamera during CHECK, therest of the images will bestored in the card
automatically.
14
13
12
111411
P O W E
R /
M O D
E D I
A L
P
A / S / M
O F F
1412
1413
[ ]YES NO
-
8/8/2019 Camedia c 3000 Engl
60/86
If Bracketing was used to take a picture, the index will appear asshown below.
If the memory only contains animage shot with Bracketing, all of itsframes will appear in the index.
210
REC VIEW (Cont.)
1235 1236 1237
OK
Image shot with Bracketing
Note: After recording a movie or taking a picture with Bracketing, you must
choose whether to save or discard it before you can record anotherimage.
Do not set CHECK in the TIFF mode. If you set it, the recording mode willbe changed to the HIGH (high quality) mode which has the same numberof pixels as it.
You can record images while the Save confirmation screen is displayed.Press the Shutter release button halfway to change to the recordingmode. The recording view with focus lock will appear on the LCD monitor.If no action is performed, the screen will automatically change back to theSave confirmation screen in 5 seconds.
If there are some images whose CHECK setting is not completed, it is notpossible to change or select the following menu settings when you recordagain with the Mode dial set to P or A/S/M. DRIVE, , , CARDSETUP and MODE SETUP.
You can set the Mode dial to P or A/S/M while the Save confirmationscreen is displayed. If you set the Mode dial to , all the images inmemory will be stored automatically in the card.
Never remove the card or batteries during CHECK. You will lose all of thedata in the memory.
You cannot display the Menu screen at the same time as the Saveconfirmation screen. The setting will remain until it is readjusted.
-
8/8/2019 Camedia c 3000 Engl
61/86
211
1000
1001 1002 1003
1003OK
Image shot with Bracketing(5 frames)
OK
Brightest
+ Com-pensation
Com-pensation
Normal
Darkest
1239 1240 1241
OK
Image shot with Bracketing(1 frame discarded)
Images shot with bracketing aredisplayed as shown on the left.
Image shot with normal images
1235 1237
OK
Note: If Bracketing was used to take a picture, you must choose whether to
save or discard it before you can record another image. Also refer to Note on page 209.
To display an image shot withBracketing, select the image andpress the OK button.
Press the OK button to save theselected image. To discard theimage, press the Erase button thenperform step 14 on page 209. It willdisappear from the screen.
Save or delete all images in memory.
-
8/8/2019 Camedia c 3000 Engl
62/86
212
FILE NUMBERYou can select the file numbering system for images transferred to apersonal computer. Files can be numbered from 0001 to 9999 andfolders can be numbered from 100 to 999.
ABOUT THE FILE NO. AND FOLDER NO.The file number and folder number used for each image are expressedas shown.
*Month: Jan. ~ Sep. = 1-9, Oct. = A, Nov. = B, Dec. = C
THE FILE NO. AND FOLDER NO. IN EACH MODE
RESET
When RESET is selected, the file number and folder number will be resetevery time a card is inserted in the camera.
AUTOWhen AUTO is selected, the same folder number and a continuingnumber from the last file number of the last card will be used, so that thesame file number will not be used for pictures taken together and savedin multiple cards.
\ D C I M \ * * * O L Y M P \ P m d d * * * * . j p g
Folder No.
100~999 Month (1~C)
File No.
0001~9999Day (01~31)
Folder No.102Card change
File No.0005
Folder No.100
File No.0001
Folder No.101Card change
File No.0005
Folder No.101File No.
starts from
0006
-
8/8/2019 Camedia c 3000 Engl
63/86
213
Set the Mode dial to P or
A/S/M.
Press the Menu button todisplay the Menu.
Press the top/bottom arrowson the Jog dial to selectMODE SETUP, then press theright arrow to select SETUP.
Press the OK button to displaythe Mode setting screen.
4
3
2
11
4
3
2
[ 3 / 3 ]
F2.8 1/800 + 2.0P
A/S/MMODE
CARDSETUPMODESETUP SETUP
P O W E
R /M
O D
E D I
A L
P
A / S / M
O F F
Note: For convenience, the folder numbers remain the same when transferred
to a computer in both selections.
\ DCIM \ *** OLYMP \ Pmdd **** .jpg
Folder No.
-
8/8/2019 Camedia c 3000 Engl
64/86
214
Press the top/bottom arrowson the Jog dial to select FILE
NAME.
Press the right arrow on theJog dial, then press thetop/bottom arrows to selectRESET or AUTO. If you select RESET, the folder
and file numbers will be reseteach time a new card isinserted. If you select AUTO,the folder number used by thelast card will be kept, and thefile number will continue fromthe last one in the previouscard. File names will thereforenot be repeated, even if yourecord several pictures indifferent cards at one time.
Press the left arrow on theJog dial to confirm the setting.
Press the OK button to savethe setting. Press again tocancel the Menu.
8
7
6
5
Note: When a card with a file number larger than the last file number is used,
the file numbers will continue from the larger number. When the maximum file number (9999) is reached, the number of
storable pictures becomes 0 even if the card is not full yet, and no more
pictures can be taken. The setting will remain until it is readjusted.
[ 2 / 3 ]
RESET
AUTO
REC VIEW
FULL-TIME AF
FILE NAME
8
765
P O W
E R
/M
O D
E D I
A L
P
A / S / M
O F F
FILE NUMBER (Cont.)
-
8/8/2019 Camedia c 3000 Engl
65/86
215
LCD BRIGHTNESSYou can adjust the brightness of the LCD monitor.
Set the Mode dial to P, A/S/M,or .
Press the Menu button todisplay the Menu.
Press the top/bottom arrowson the Jog dial to selectMODE SETUP, then press theright arrow to select SETUP.
Press the OK button to displaythe Mode setting screen.
4
3
2
1
(Still picture record menu)
1
42
[ 3 / 3 ]
F2.8 1/800 + 2.0P
A/S/MMODE
CARDSETUPMODESETUP SETUP
P O W E
R /
M O D
E D I A L
P
A / S / M
O F F
3
-
8/8/2019 Camedia c 3000 Engl
66/86
216
Press the top/bottom arrowson the Jog dial to select .
Press the right arrow on theJog dial to select SETUP, thenpress the OK button. appears on
the LCD monitor.
Press the right/left arrows onthe Jog dial to select thebrightness.
Press the OK button toconfirm the setting.
Press the OK button to savethe setting. Press again tocancel the Menu.
9
8
7
6
5
Note: The setting will remain until it is readjusted.
[ 3 / 3 ]
m/f t
SETUP
986
P O W E
R /
M O D
E D I
A L
P
A / S / M
O F F
765
LCD BRIGHTNESS (Cont.)
-
8/8/2019 Camedia c 3000 Engl
67/86
217
METERS/FEET SELECTIONYou can select meters or feet to be used by the Manual focus settingscreen. (In the Macro mode, the unit will shift between centimeters andinches.)
Set the Mode dial to P, A/S/Mor .
Press the Menu button todisplay the Menu.
Press the top/bottom arrowson the Jog dial to selectMODE SETUP, then press theright arrow to select SETUP.
Press the OK button to displaythe Mode setting screen.
Press the top/bottom arrowson the Jog dial to select m/ft.
Press the right arrow on theJog dial, then press thetop/bottom arrows to select m(meters) or ft (feet).
Press the left arrow on theJog dial to confirm the setting.
Press the OK button to savethe setting. Press again tocancel the Menu.
8
7
6
5
4
3
2
1
Note: The setting will remain until it is readjusted.
(Still picture record menu)
1
2
[ 3 / 3 ]
m/f t m
ft
[ 3 / 3 ]
F2.8 1/800 + 2.0P
A/S/MMODE
CARD
SETUPMODESETUP SETUP
P O W E
R /
M O D
E D I
A L
P
A / S / M
O F F
84
7653
-
8/8/2019 Camedia c 3000 Engl
68/86
218
INDEX-DISPLAY ADJUSTMENTYou can select the number of frames shown in the Index-Display mode.
Set the Mode dial to .
Press the Menu button todisplay the Menu.
Press the top/bottom arrowson the Jog dial to selectMODE SETUP, then press the
right arrow to select SETUP.
Press the OK button to displaythe Mode setting screen.
Press the top/bottom arrowson the Jog dial to select .
Press the right arrow on theJog dial, then press thetop/bottom arrows to selectthe number.
Press the left arrow on theJog dial to confirm the setting.
Press the OK button to save
the setting. Press again tocancel the Menu.
8
7
6
5
4
3
2
1
Note: If no image is recorded in the card, the Menu screen will not be displayed
when the Menu button is pressed. The setting will remain until it is readjusted.
(Still picture display menu)
1
84
7653P
A / S / MO
F F
P O W E R / M O
D ED
I A L
2
[ 2 / 2 ] 1 0
CARDSETUPMODESETUP SETUP
[ 1 / 1 ]
49
16
ALL RESET
-
8/8/2019 Camedia c 3000 Engl
69/86
7MISCELLANEOUS
OL Y MP
U S D I GI T A L
C A M
E R A
-
8/8/2019 Camedia c 3000 Engl
70/86
220
QUESTIONS AND ANSWERSQ
How long will the batteries last?
A Battery life is affected by many variables such as the amount of LCDmonitor use, the frequency of flash use, as well as by the kind ofbattery used and the environmental conditions under which thecamera is used. Using the LCD monitor frequently will use up yourbatteries quickly. Keep the LCD monitor turned off to save power. Useof the optional AC adapter is recommended.
Q
How can I correct the clock in the camera that will be used to recordthe date on the image data?
ADate adjustment is not made when the camera is shipped. You canadjust the date either from the camera or from the computer. (p. 34)
QHow should I store the camera?
ACameras are susceptible to damage caused by dust, moisture, andsalt. Wipe and dry the camera thoroughly before storing it. After usingit at the beach, wipe it with a cloth that has been moistened with freshwater and then wrung out. Do not store in an area where mothballsare used. Unload the batteries if you do not plan to use the camera fora long period.
QWhy do the subjects eyes sometimes appear red in pictures?
AThis red-eye phenomenon occurs with all cameras when a flash isused. It is caused by light from the flash reflecting off the retina at theback of the eye. Red-eye varies depending on the individual and theshooting conditions such as ambient lighting. Use of the Red-EyeReducing Pre-Flash mode significantly reduces this phenomenon.
-
8/8/2019 Camedia c 3000 Engl
71/86
221
QCan I use a filter, hood or conversion lens?
A You cannot use a filter or a hood. A conversion lens adapter (optional)is required to attach a conversion lens to the camera.
QCan I use an extension flash?
AYes you can. You can use an extension flash with a grip (p. 90).
For more information, please see our Internet home page(http://www.olympus.com).
-
8/8/2019 Camedia c 3000 Engl
72/86
222
TROUBLESHOOTING
OPERATING PROBLEMSThe camera does not work.1 The power is OFF.
[ Set the Mode dial to turn on the power. (P. 36)2 The batteries are loaded incorrectly.
[ Reload the batteries correctly. (P. 28)3 The batteries are exhausted.
[ Replace the batteries with new ones. (P. 28)4 The batteries are temporarily unable to function.
[ Keep the batteries warm while using the camera.5 Power has shut off to conserve battery consumption.
[ Operate the shutter button or the zoom lever.6 It is connected to a personal computer.
[ The camera will not operate while it is connected to a personalcomputer.
No picture is taken when the Shutter release button is pressed.1 The flash has not finished charging or the previous picture is being
written into the card.[
Remove your finger from the Shutter release button and wait untilthe Green lamp or the Orange lamp stops blinking. (P. 48/64)2 There is a problem with the card.
[ See the Error code chart. (P. 227)3 The card is full.
[ Replace the card, delete unwanted pictures or transfer the data toa computer and delete all of the pictures. (P. 32/113/120/180 ~ 184)
4 The batteries ran out.[ Replace the batteries with new ones. (P. 28)
5 The battery power is low.[ Replace the batteries with new ones. (Do not open the Battery
compartment cover when the Card access lamp is blinking.)(P. 28)
6 The buffer memory is full.[ Wait until there is room in the buffer. (P. 51/129)
7 A write-protect adhesive seal is placed on the card or there is no cardin the camera.[ Insert a new card in the camera. (P. 32)
8 The Mode dial is set to .[ Set the Mode dial to P, A/S/M or . (P. 37)
-
8/8/2019 Camedia c 3000 Engl
73/86
223
The flash does not fire.1 The flash mode was set to the Off mode.
[ Check the flash mode before shooting. (In the Sequence mode
and the Panorama mode, the flash cannot be used.) (P. 64)2 The subject is lighted.[ Set the flash to Fill-In mode. (P. 64/66)
The pictures already taken do not appear on the LCD monitor.1 The camera is in the Record Mode.
[ Set the Mode dial to . (P. 108/152)2 There is no picture in the card.
[ NO PICTURE appears on the LCD monitor. (P. 108)3 There is a problem with the card.
[ See the Error code chart. (P. 227)4 It is connected to a TV.
[ The LCD monitor is turned off while the camera is connected to aTV. (P. 124)
The LCD monitor is hard to read.1 The brightness may be incorrectly set.
[ Adjust the brightness. (P. 215)2 It is under sunlight.
[ Block the sunlight.3 The LCD monitor is broken.
[ Have it repaired.
When the camera is connected to a computer, an error messageappears while data is being transferred to the computer.1 The cable is not plugged in correctly.
[
Connect the cable correctly. (P. 182/183)2 The power is OFF.[ Set the Mode dial . (P. 183)
3 The batteries are exhausted.[ Replace the batteries with new ones (P. 28) or use the optional
AC adapter (P. 30).4 The serial port is not selected correctly.
[ Use the operating system software to make sure the serial port isselected correctly.
5 There is no available serial port.[ Make one available by following the computers instructions.
-
8/8/2019 Camedia c 3000 Engl
74/86
224
TROUBLESHOOTING (Cont.)Image protect, Single-erase, All-frame erase or Card format cannotbe performed.1 A write-protect adhesive seal is affixed to the card.
[ Use the card after peeling off the seal. Do not reuse the writeprotect seal. (P. 121)
PROBLEMS WITH IMAGESThe picture is out of focus1 The camera moved when the shutter button was pressed.
[ Hold the camera correctly, and press the shutter button.
(P. 38/39)2 The viewfinders autofocus mark was not positioned on the subject.[ Position the autofocus frame on the subject, or use the focus
lock. (P. 53/131)3 The lens is dirty.
[ Clean the lens with a soft dry cloth.4 The mode was not selected correctly.
[ Shoot with the Macro mode when the subject is within the rangeof 8"~31". For further distances, shoot with the Standard mode.(P. 56/69)
5 The Shutter release button was pressed while atanding in front of thecamera in the Selftimer mode.[ Press the Shutter release button while looking into the viewfinder,
not while standing in front of the camera. Or, use the remotecontrol. (P. 76/138)
6 The Manual focus was used with the wrong focal range.[ Use the right Manual focus for the distance. (P. 71/135)
The picture is too dark.1 The flash was blocked by a finger.
[ Hold the camera correctly, keeping your fingers away from theflash. (P. 38)
2 The subject was out of the working range of the flash.[ Shoot within the flash working range. Or, use an extension flash.
(P. 64/92)3 The flash mode was set to the Off mode.
[
Check the flash mode before shooting. (P. 64)
-
8/8/2019 Camedia c 3000 Engl
75/86
-
8/8/2019 Camedia c 3000 Engl
76/86
226
SYSTEM CHARTA variety of capabilities are available when connected to optionalequipment.
Printer (P-330N/P-330) TV
Personal computer
MO driveSmartMedia
FlashPath
PC card adapter
AC adapterCamera
Wide conversionlens
Macroconversion lens
Conversion lensadapter
Tele Conversionlens
Remotecontrol
TV
Extension flashGripBracket cable
SmartMediaReader/ Writer
-
8/8/2019 Camedia c 3000 Engl
77/86
227
ERROR CODESError codes appear when there is a problem with the camera.Error codes displayed on the control panel will flash.
(No display)
LCD monitorCARDCOVEROPEN
NO CARD
CARDFULL
WRITEPROTECT
CARDERROR
PICTUREERROR
Error contentThe card cover isopen.
The card is notinserted, or itcannot berecognized.
No more picturescan be taken.
Writing to thecard is
prohibited.
Cannot record,play back orerase pictures inthis card.
The recordedimage cannot beplayed back withthis camera.
RemedyInsert a card and closethe cover.
Insert a card. Or insertthe card again.
Replace the card orerase unneeded pictures.
If you are taking pictures,remove the write-protect
adhesive seal.
If the card is dirty, wipe itwith a clean tissue andinsert it again. Or, formatthe card. If the problem isstill not corrected, thiscard cannot be used.
Load the image usingpersonal computer imageprocessing software. Ifthat cannot be done, theimage file is partiallydamaged.
Control panel
-
8/8/2019 Camedia c 3000 Engl
78/86
-
8/8/2019 Camedia c 3000 Engl
79/86
229
OPTIONAL ITEMS Photo Printers For Olympus Digital Cameras AC Adapter Camera Case
Standard SmartMedia Card (8/16/32/64MB) FL-40 extension flash Exclusive Grip Bracket cable FlashPath Floppy Disk Adapter PC Card Adapter NiMH Batteries NiMH Battery Charger
USB SmartMedia Reader/Writer
NOTES ON DISPLAY ANDBACKLIGHT
The Control panel and the fluorescent lamps used in the LCD monitorhave a limited service life. If they begin to darken or flicker, contact yournearest service center.
In cold conditions, the display backlight may be slow to come on or maychange color suddenly. To avoid this, keep the camera warm whenusing in cold temperatures. Backlight performance will return to normalunder normal temperature conditions.
When the color LCD monitor shows different pictures, some pixels maynot change color and remain on or off. This phenomenon may be dueto a lag in some circuits, but is considered to be within the normaloperating tolerances of the LCD monitor. In addition, the brightness of
the color LCD monitor may vary between pictures.
-
8/8/2019 Camedia c 3000 Engl
80/86
230
COMPATIBILITY OF THEPICTURE DATA
Images taken by this camera may not be properly displayed or printedwith other Olympus digital cameras.
Images taken by other Olympus digital cameras may not be properlydisplayed or printed with this camera.
-
8/8/2019 Camedia c 3000 Engl
81/86
231
SPECIFICATIONSProduct type : Digital camera (for shooting and displaying)Recording System
Still : Digital recording, JPEG (in accordance withDesign rule for Camera File system (DCF)),TIFF (non-compression), Digital Print OrderFormat (DPOF)
Sound withstill images : Wave formatMovie : QuickTime Motion JPEG support
Memory : 3V (3.3V) SmartMedia 2MB, 4MB, 8MB,16MB, 32MB, 64MB
No. of storable pictures : Approx. 0 frame (TIFF/2048 x 1536)(When an 8 MB card is used) : Approx. 4 frames (SHQ): Approx. 10 frames (HQ): Approx. 24 frames (SQ1/1280 x 960 NORMAL): Approx. 82 frames (SQ2/640 x 480 NORMAL)
Erase : One-Frame erase / All-Frames eraseImage pickup element : 1/1.8 inch CCD solid-state image pickup
: 3,340,000 pixels (gross)
Recording image : 2048 x 1536 pixels (TIFF/SHQ/HQ): 1600 x 1200 pixels (TIFF/SQ1): 1280 x 960 pixels (TIFF/SQ1): 1024 x 768 pixels (TIFF/SQ2): 640 x 480 pixels (TIFF/SQ2)
White balance : Full Auto TTL (iESP auto), Preset (Daylight,Overcast, Tungsten light, Fluorescent)
Lens : Olympus lens 6.5 ~ 19.5 mm, F2.8, 6
elements in 8 groups (equivalent to 32 ~ 96mm lens on 35 mm camera),aspherical glass
Photometric system : Digital ESP metering system,Spot metering system
Exposure control : Program auto, Aperture priority,Shutter priority, Manual
Aperture : W : F2.8 ~ 11.0: T : F2.8 ~ 11.0
Shutter speed : Used with mechanical shutterStill : 1 ~ 1/800 sec. (16 ~ 1/800 sec. with manual
setting)
-
8/8/2019 Camedia c 3000 Engl
82/86
232
SPECIFICATIONS (Cont.)Movie : 1/30 ~ 1/10000 sec.
Working range : 31" ~ (Standard mode)8" ~ 31" (Macro mode)
Viewfinder : Optical real image viewfinder (Autofocusmark/Backlighting correction mark),LCD monitor
LCD monitor : 1.8" TFT color LCD displayNo. of pixels : Approx. 114,000 pixelsOn-screen display : Date/Time, Frame number, Protect,
Recording mode, Battery check, Pictureinformation, Print-reserve, Menu, etc.
Battery charging timefor flash : Approx. 6 sec. (at normal temperature withnew batteries)
Flash working range : W : Approx. 31" ~ 12.5 ft: T : Approx. 8" ~ 12.5 ft
Flash modes : Auto-Flash (automatic flash activation in lowlight and backlight), Red-Eye ReducingFlash, Fill-In Flash (forced activation),Off (no flash)
Autofocus : TTL system iESP autofocus, Contrastdetection system
Focusing range : 8" ~ Selftimer : Electronic Selftimer with 12-sec. delayOuter connectors : AC adapter connector, Computer connector
(RS-232C), A/V output connector, USBterminal (USB 1.0 compatible), Extensionflash connector
Date and time : Recorded with picture data simultaneouslyAutomatic calendarsystem : Up to 2030Operating environment
Temperature : 32 ~104F (operation) 4 ~ 140F (storage)
Humidity : 30 ~ 90% (operation)
-
8/8/2019 Camedia c 3000 Engl
83/86
233
10 ~ 90% (storage)Power supply : For batteries, use 2 CR-V3 lithium battery
packs, or 4 AA NiMH batteries, NiCd
batteries, alkaline batteries or lithiumbatteries.AC adapter (optional)
Dimensions : 4.3" (W) x 3.0" (H) x 2.6" (D)(109.5 x 76.4 x 66.4 mm)
Weight : 10.6 oz (without batteries/card)
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE OROBLIGATION ON THE PART OF THE MANUFACTURER.
-
8/8/2019 Camedia c 3000 Engl
84/86
-
8/8/2019 Camedia c 3000 Engl
85/86
235
-
8/8/2019 Camedia c 3000 Engl
86/86
OLYMPUS OPTICAL CO., LTD.San-Ei Building, 22-2, Nishi Shinjuku 1-chome, Shinjuku-ku, Tokyo, Japan. Tel. 03-3340-2026
OLYMPUS AMERICA INC.Two Corporate Center Drive, Melville, NY 11747-3157, U.S.A. Tel. 516-844-5000
(Customer support) Tel. 1-888-553-4448www.olympusamerica.comdistec@olympus.com
OLYMPUS OPTICAL CO. (EUROPA) GMBH.(Premises/Goods delivery) Wendenstrae 14-16, 20097 Hamburg, Germany. Tel. 040-237730
(Letters) Postfach 10 49 08, 20034 Hamburg, Germany.www.olympus-europa.com
OLYMPUS OPTICAL CO. (U.K.) LTD.2-8 Honduras Street, London EC1Y 0TX, United Kingdom. Tel. 0171-253-2772
top related