caliper gauge - 株式会社テクロック
Post on 07-Nov-2021
1 Views
Preview:
TRANSCRIPT
36
Internal Dial Caliper Gauge • These gauges are designed for use in measuring deep internal diameter of bores of castings etc, and for internal reading in fabrications.
Clearance has been provided for use in recessed bores. The convenient retraction lever allows one-hand operation.
Dimensions
unit : mm
Maximum Measuring Depth
contact pointheight
Mea
surin
g R
ange
90
24
IM-1
IM-2
IM-4
IM-5
0.1
0.1
0.01
0.01
10~100
10~100
10~30
20~40
500
620
500
600
Graduation (mm)
Weight(g)
±0.1
±0.1
±0.02
±0.02
Indication Error (mm)
5 or less
5 or less
5 or less
5 or less
Measuring Force
(N)
Measuring Range (mm)
130
180
100
150
Maximum Measuring Depth
(mm)2
2
2
4
Contact Point Height(mm)
Model
Specifications
Internal SizeModel
IM-1IM-2IM-4IM-5
10
353535–
Internal size of workpiece is 10mm, 15mm, 20mm and 30mm or over against measuring applicable depth.
15
505050–
20
808080140
30~
130180100150
unit : mm
Measuring applicable depth
Internalsize Inside of workpiece should be straight
or round shape without step etc.
IM-1Maximum measuring depth 130mmGraduation 0.1mmMeasuring Range 10~100mm
IM-2Maximum measuring depth 180mmGraduation 0.1mmMeasuring Range 10~100mm
IM-4Maximum measuring depth 100mmGraduation 0.01mmMeasuring Range 10~30mm
IM-5Maximum measuring depth 150mmGraduation 0.01mmMeasuring Range 20~40mm
(2.5)
IM-1,2,4(2.5)
IM-5
φ2.5R1.54
Caliper GaugeAs to internal caliper gauge IM-880 series, the distance between contact points facing outside is firstly set at standard dimension with ring gauge or micrometer. Then, it is measured by inserting contact point into internal dimension part to be measured after its outer dial of which moves together with rotated bezel is set at “0”. The displacement of indicator from “0” point of outer dial is to be measured at that time. The value adding to the read displacement to standard dimension or deducting it from standard dimension is the dimension of internal diameter. This series attaches spare contact point which cam set accurate dimension corresponding to size of internal dimension. External caliper gauge is opposite, namely reading the value by holding work piece with 2 contact points facing outside.
I have to measure the inner diameter of small metal parts.
Caliper Gauge
37
• Internal caliper gauge to measure internal diameter of cylindrical workpiece and recessed groove diameter. It can measure groove diameter of "O" ring by modifying spare contact point.
• Set dimension within ±1mm (indication range 2mm) can be comparatively measured (880 series) by alternatively using auxiliary spare contact point in accordance with measured dimension.
• Please set standard dimension within measuring range with micrometer or ring gauge.
Approx. 70mm App
rox. 75mm
Approx. 90mm
Code No.
ZS-408ZS-409ZS-410ZS-411ZS-412
L1
35.5666
L2
4.57.510.513.516.5
Dimension Table :Spare Contact Point (Option)
MeasuringRange30~3836~4442~5048~5654~62
unit : mm
Code No.
ZS-423ZS-424ZS-425ZS-426ZS-427ZS-428ZS-429
L1
2.53.54.55.55.55.55.5
L2
456789
10
Dimension Table :Spare Contact Point (Option)
MeasuringRange20~2322~2524~2726~2928~3130~3332~35
unit : mm
ZS-428,429
ZS-423~427
φ1.
5φ1.5
φ4.
5φ
4.5
L13
M2.5×P0.45
L2
L13L2
M2.5×P0.45
SR0.5
Dimensions :Spare Contact Point (Option)
unit : mm
SR0.5
ZS-408,409
ZS-410~412
Dimensions :Spare Contact Point (Option)
unit : mm
φ1.
5
L1
L1L2
L2
7
7
M3.5×P0.6
M3.5×P0.6
φ4.
5
18°
φ4.
5
SR0.5
SR0.5 18°
φ1.
5
Code No.
ZS-413ZS-414ZS-415ZS-416ZS-417ZS-418
L
71523313947
Dimension table:Spare Contact Point (option)
MeasuringRange55~7371~89
87~105103~121119~137135~153
unit : mm
ZS-413 ZS-414
ZS-415~418
φ1.
5 φ4.
5
1375
M3.5×P0.6
φ2
M3.5×P0.6
131512
φ4.
5
φ2
M3.5×P0.6
12L 13
φ4.
5
Dimensions : Spare Contact Point (Option)
unit : mm
SR1
SR1.5
SR1.5
External Dimensions
L
φ62
ModelIM-880IM-881IM-882
L165170183
unit : mm
Dimensions
Maximum Measuring Depth
MaximumGroove Depth
Minimum Groove Width
A
B
Entra
nce
Dia
met
er φD
H
unit : mm
Moving Arm
SpareContact Point
Fixed Arm
Specifications
0.01
0.01
0.01
20~35
30~62
55~153
196
218
240
2
2
2
Graduation (mm)
Weight(g)
Indicating Range(mm)
3 or less
3 or less
3 or less
Measuring Force(N)
ZS-423ZS-424ZS-425ZS-426ZS-427ZS-428ZS-429ZS-408ZS-409ZS-410ZS-411ZS-412ZS-413ZS-414ZS-415ZS-416ZS-417ZS-418
Code No.
Spare Contact Point
20~2322~2524~2726~2928~3130~3332~3530~3836~4442~5048~5654~6255~7371~89
87~105103~121119~137135~153
Measuring Range (mm)
±20
±20
±20
Indication Error(μm)
Measuring Range(mm)
Model
IM-880
IM-881
IM-882
2.53.5444443
4.34.34.34.35
8.58.58.58.58.5
Groove DepthH (mm)
Minimum Groove Width
B (mm)15~1815~1816~1918~2120~2322~2524~2724~32
27.4~35.433.4~41.439.4~47.445.4~53.4
45~6354~7270~88
86~104102~120118~136
Entrance DiameterΦd (mm)*
Maximum Measuring Depth
A (mm)
70
75
90
2.5
2.5
3.5
*φD=Measuring Rang - 2H
Dial Depth Gauge
IM-880Maximum Measuring Depth 70mmGraduation 0.01mmMeasuring Range 20~35mm
IM-881Maximum Measuring Depth 75mmGraduation 0.01mmMeasuring Range 30~62mm
IM-882Maximum Measuring Depth 90mmGraduation 0.01mmMeasuring Range 55~153mm
Caliper Gauge
38
Dimensions
Maximum Measuring Depth
MaximumGroove Depth
Minimum Groove Width
A
B
Entra
nce
Dia
met
er φD
H
unit : mm
Moving Arm
SpareContact Point
Fixed Arm
Extenshion Rods(Optoin)
Spare Contact Point
L
Specifications
Model
IM-880B
IM-881B
IM-882B
Weight(g)
196
218
240
Graduation(mm)
0.01
0.01
0.01
MeasuringRange(mm)
20~35
30~62
55~153
Indicatingrange(mm)
1.4
1.4
1.4
IndicationError(µm)
±20
±20
±20
MeasuringForce(N)
3 or less
3 or less
3 or less
MaximumMeasuring Depth
A (mm)
70
75
90
EntranceDiameterφD (mm)*
14.315.314.315.315.316.317.318.319.320.321.322.323.324.325.326.324
27.433.439.445.445547086102118
Groove DepthH (mm)
2.52.53.53.54444444444443
4.34.34.34.35
8.58.58.58.58.5
Groove WidthB (mm)
2.5
2.5
3.5
Spare Contact Point
ZS-423ZS-423ZS-424ZS-424ZS-425ZS-425ZS-426ZS-426ZS-427ZS-427ZS-428ZS-428ZS-429ZS-426ZS-426ZS-427ZS-408ZS-409ZS-410ZS-411ZS-412ZS-413ZS-414ZS-415ZS-416ZS-417ZS-418
ZS-423ZS-424ZS-424ZS-425ZS-425ZS-426ZS-426ZS-427ZS-427ZS-428ZS-428ZS-429ZS-429ZS-426ZS-427ZS-427ZS-408ZS-409ZS-410ZS-411ZS-412ZS-413ZS-414ZS-415ZS-416ZS-417ZS-418
ExtensionRods
−−−−−−−−−−−−−
ZS-646ZS-646ZS-646
−−−−−−−−−−−
MeasuringRange (mm)19.3~20.720.3~21.721.3~22.722.3~23.723.3~24.724.3~25.725.3~26.726.3~27.727.3~28.728.3~29.729.3~30.730.3~31.731.3~32.732.3~33.733.3~34.734.3~35.729.3~38.735.3~44.741.3~50.747.3~56.753.3~62.754.3~73.770.3~89.786.3~105.7102.3~121.7118.3~137.7134.3~153.7
Code No.
IM-880BGraduation 0.01mmMeasuring Range 19.3~35.7mm
IM-881BGraduation 0.01mmMeasuring Range 29.3~62.7mm
IM-882BGraduation 0.01mmMeasuring Range 54.3~153.7mm
• IM-880 series dialcaliper gauges can measure internal dimension up to measuring range in the right list by installing extension rods. Standard products of spare extension rods can be used as it is.
Optional Extension Rods
Mounting Method of Spare Contact Point
Spanner is supplied as standard accessory.
Spanner
ArmHexagon lock nutFine adjustment enabled.
Spanner
ZS-423ZS-424ZS-425ZS-426ZS-427ZS-428ZS-429
ZS-646L=7
ZS-423ZS-424ZS-425ZS-426ZS-427ZS-428ZS-429
ZS-647L=14
ZS-423ZS-424ZS-425ZS-426ZS-427ZS-428ZS-429
ZS-648L=21
ZS-423ZS-424ZS-425ZS-426ZS-427ZS-428ZS-429
ZS-649L=28
Extension RodsSpare Contact Point Measuring Range
IM-880: Measuring range with extension rods (mm)
ZS-408ZS-409ZS-410ZS-411ZS-412
ZS-693L=15
ZS-408ZS-409ZS-410ZS-411ZS-412
ZS-694L=30
ZS-408ZS-409ZS-410ZS-411ZS-412
ZS-695L=45
IM-881: Measuring range with extension rods (mm)
Extension RodsSpare Contact Point Measuring Range
ZS-413ZS-414ZS-415ZS-416ZS-417ZS-418
ZS-696L=48
ZS-413ZS-414ZS-415ZS-416ZS-417ZS-418
ZS-697L=96
IM-882: Measuring range with extension rods (mm)
Extension RodsSpare Contact Point Measuring Range
One Revolution Internal Dial Caliper Gauge
34~3736~3938~4140~4342~4544~4746~4948~5150~5352~5554~5756~5958~6160~6362~6564~6766~6968~7170~7372~7574~7776~7978~8180~8382~8584~8786~8988~91
60~6866~7472~8078~8684~9290~9896~104102~110108~116114~122120~128126~134132~140138~146144~152
151~169167~185183~201199~217215~233231~249247~265263~281279~297295~313311~329327~345
Caliper Gauge
39
5 or less5 or less10 or less5 or less
530800
1,400550
External Dial Caliper Gauge • These gauges are designed for use in measuring external dimension of thick and large measuring work piece or special shape products which
seem to be difficult to measure. • Special order can be produced.
GM-3
DimensionsMaximum Measuring Depth
90(110)
( ):GM-3
24(32)
H3H1
H2
H4
Mea
surin
g Ra
nge
unit : mm
H1255060
ModelGM-1GM-2GM-3
H2406070
H3255060
H4406080
Dimension Table
unit : mm
Overall length of GM-3 is large as 635mm.
GM-1GM-2GM-3GM-8
0.10.10.10.1
0~900~900~900~80
Graduation(mm)
Measuring Range(mm)
125250400130
Maximum measuring depth (mm)
Measuring Force(N)
Weight(g)Model
Specifications
±0.1±0.1±0.2±0.1
Indication Error(mm)
GM-2GM-1Maximum measuring depth 125mmGraduation 0.1mmMeasuring Range 0~90mm
Maximum measuring depth 250mmGraduation 0.1mmMeasuring Range 0~90mm
Maximum measuring depth 400mmGraduation 0.1mmMeasuring Range 0~90mm
Maximum measuring depth 130mmGraduation 0.1mmMeasuring Range 0~80mm
Dimensions : GM-8
unit : mm
90
130 R180
80
24
GM-8 120
14
Caliper Gauge
40
H122176520
ModelGM-9GM-11GM-20GM-21GM-22
H2126117025
H322171065
H4126111570
Dimension Table
unit : mm
GM-9GM-11GM-20GM-21GM-22
0.10.10.10.10.1
0~300~500~800~900~90
Graduation(mm)
Measuring Range(mm)
100125125220250
Maximum Measuring Depth (mm)
5 or less5 or less5 or less5 or less5 or less
460480500660720
Measuring Force(N)
Weight(g)Model
Specifications
±0.1±0.1±0.1±0.1±0.1
Indication Error(mm)
GM-9 GM-11 GM-20
GM-21 GM-22
Usage Example
Thickness of long distance position of board shape workpiece can be measured.(maximum measuring depth 400mm=GM-3)
Thickness measurement in narrow area. (GM-9,GM-11)
It can measure evading obstacles in front of measuring point. (GM-8,GMD-8J)
Internal Caliper Gauge
External Caliper Gauge
Internal dimension of deep position can be easily measured. (maximum measuring depth 180mm=IM-2)
Measurement evading from screw, nuts etc. can be made.
Groove diameter of groove for "O" ring can be easily measured. (IM-808,IM-880 etc)
DimensionsMaximum Measuring Depth
90
24H3H1
H2
H4
Mea
surin
g Ra
nge
unit : mm
Maximum measuring depth 100mmGraduation 0.1mmMeasuring Range 0~30mm
Maximum measuring depth 125mmGraduation 0.1mmMeasuring Range 0~50mm
Maximum measuring depth 125mmGraduation 0.1mmMeasuring Range 0~80mm
Maximum measuring depth 220mmGraduation 0.1mmMeasuring Range 0~90mm
Maximum measuring depth 250mmGraduation 0.1mmMeasuring Range 0~90mm
Caliper Gauge
41
External Digital Caliper Gauge
Dimensions
Dimensions
GMD-1J/GMD-2J
GMD-8J unit : mm
unit : mm
Maximum Measuring Depth
90
24H3
H1
H2
H4
Mea
surin
g Ra
nge
90
130 R180
80
24
H12550
ModelGMD-1JGMD-2J
H24060
H32550
H44060
Dimension Table
unit : mm
GMD-1JGMD-2JGMD-8J
0.10.10.1
0~900~900~80
Graduation(mm)
Measuring Range(mm)
125250130
Maximum Measuring Depth (mm)
5 or less5 or less5 or less
560830580
Measuring Force(N)
Weight(g)Model
Specifications
±0.1±0.1±0.1
Indication Error* (mm)
*The quantizing error function is not included.
Print out switch(Option)Print out switch
(Option)
Print out switch(Option)
GMD-1J GMD-2J
GMD-8J
• External dimension measuring instrument of which digital gauge is built into frame. This can treat statistics data and print out it by connecting it to the optional exclusive printer SD-765P (Please refer to page 30).
• It is possible to equip print out switch (Option).
Maximum measuring depth 125mmGraduation 0.1mmMeasuring Range 0~90mm
Maximum measuring depth 250mmGraduation 0.1mmMeasuring Range 0~90mm
Maximum measuring depth 130mmGraduation 0.1mmMeasuring Range 0~80mm
Printer (Option)Mini Printer for Digital Caliper Gauges SD-763PConnect cord ZE-018
Caliper Gauge
42
FM-20
FM-20FM-25
InternalExternal
20~1300~100
Measuring Range(mm)
3030
380380
Arm Length(mm)
7~97~9
Measuring Force(N)
φ3.5φ3.5
Fitting Holes(mm)
Weight (g)Model Application
Specifications
Internal Measurement
FM-25External Measurement
Dimensions
unit : mm
Dimensions
unit : mm
Indicator (Option)Contact point (Option)
Contact Point (Option)Indicator (Option)
Contact point and digital indicator are not included.
Groove internal diameter is comparatively measured by using Digital indicator with0.001mm resolution
Example
150
3043
10 (Maximum Stroke)
124
Fixing ArmMovable Arm
Contact Point
20
150
10 (Maximum Stroke)
2042
30Fixing Arm
Contact Point
Movable Arm
111
Arm Slide Type Caliper Gauge • Stable and accurate measuring dimension (comparative measurement) is possible for internal and external dimension, as this can well stick to
workpiece with measurement method by sliding movable arm. • Boxy type, easily to hold, lightweight and solid, this is suitable to inspect large volume at work site. • This can be used for various objectives to measure internal gears, internal diameter female screw, plain gear, spline shaft of special key, over
pin diameter of separation shaft and pitch gear thickness. • Contact point is separately produced on demand such as ball type, flat type, knife edge type. Please advise dimension and shape. • As Digital indicator is an option, please select it according to an objective. Because dial indicator can be installed. • This can print out data by connected to Digital mini printer SD-763P (option).
top related