burnt-in timecode - wikipedia, the free encyclopedia
Post on 06-Apr-2018
218 Views
Preview:
TRANSCRIPT
-
8/3/2019 Burnt-In Timecode - Wikipedia, The Free Encyclopedia
1/2
Color bars with burnt-in timecode
Burnt-in timecodeFrom Wikipedia, the free encyclopedia
Burnt-in timecode (often abbreviated to BITC by analogy to
VITC) is a human-readable on-screen version of the timecode
information for a piece of material superimposed on a video
image. BITC is sometimes used in conjunction with "real"
machine-readable timecode, but more often used in copies of
original material on to a non-broadcast format such as VHS, so
that the VHS copies can be traced back to their master tape and
the original time codes easily located.
Many professional VTRs can "burn" (overlay) the tape timecode
onto one of their composite outputs. This output (which usually
also displays the setup menu or on-screen display) is known as
thesuper outormonitor out. The characterswitch or menu
item turns this behaviour on or off. The characterfunction is also used to display the timecode on the
preview monitors in linear editing suites.
Videotapes that are recorded with timecode numbers overlaid on the video are referred to as window dubs,
named after the "window" that displays the burnt-in timecode on-screen.
Timecode can also be superimposed on video using a dedicated overlay device, often called a "window dub
inserter". This inputs a video signal and its separate timecode audio signal, reads the timecode, superimposes
the timecode display over the video, and outputs the combined display (usually via composite), all in real
time. Stand-alone timecode generator / readers often have the window dub function built-in.
Some consumer cameras, in particular DV cameras, can "burn" (overlay) the tape timecode onto the
composite output. This output typically is semi-transparent and may include other tape information. It isusually activated by turning on the 'display' info in one of the camera's sub-menus. While not as
'professional' as an overlay as created by a professional VCRs, it is a cheap alternative that is just as
accurate.
Timecode is stored in the metadata areas of captured DV AVI files, and some software is able to "burn"
(overlay) this into the video frames. For example, DVMP Pro[1] is able to "burn" timecode or other items of
DV metadata (such as date and time, iris, shutter speed, gain, white balance mode, etc.) into DV AVI files.
Some modern editing systems can use OCR techniques to read BITC in situations where other forms of
timecode are not available.
BITC can also be referred to as Viz-Code.[citation needed]
See also
Linear timecode
Vertical interval timecode
SMPTE time code
MIDI timecode
CTL timecodeAES-EBU embedded timecode
Rewritable consumer timecode
2
-
8/3/2019 Burnt-In Timecode - Wikipedia, The Free Encyclopedia
2/2
References
^ DVMP Pro (http://www.dvmp.co.uk/dv-media-player-pro.htm) - Software for burning in timecode and other
items of metadata for DV AVI files.
1.
Retrieved from "http://en.wikipedia.org/w/index.php?title=Burnt-in_timecode&oldid=445096874"
Categories: Timecodes Film and video technology
This page was last modified on 16 August 2011 at 04:23.
Text is available under the Creative Commons Attribution-ShareAlike License; additional terms
may apply. See Terms of use for details.
Wikipedia is a registered trademark of the Wikimedia Foundation, Inc., a non-profit
organization.
2
top related