bungee sl - global furniture group · bungee design guide rev.00 flat bracket flat bracket support...
Post on 08-Mar-2020
6 Views
Preview:
TRANSCRIPT
Effective August 2019
bung
ee s
lD
ESI
GN
GU
IDE
1. Square Corner
Design Guide
2. Rounded Corner - Bubble Edge
Tops
Bungee Design Guide Rev.00 01
Bungee™
Pre-drilled holes(for optional modesty panel and power trough)
Spider leg orientationTop orientation
90º
20”, 24”, 30” deep
24” deep20” deep 30” deep
Tapered Legs
3”
13.5”
3.5”
3”
regularposition
sharedposition
6”
regularposition
sharedposition
regularposition
sharedposition
regularposition
sharedposition
Spider Legs
Filler Panel
1.25”
Bungee™
• For 30” deep tops use B30SPLEG.
Design Guide Top and Leg Orientation
Legs
2
Pre-drilled holes
3” 1.25” 3”6” 3” 1.25” 3”6” 3”
1.25” 3”6” 3”
1.25”
6”
13.5”
4.75”
5.5”
18.5”
5.25”
6”
• For 20” and 24” deep tops use B2xSPLEG. • Legs are available with adjustable levelers only.
Casters are not an option for Bungee SL.
• Legs are available with adjustable levelers only. Casters are not an option for Bungee SL.
(for optional modesty panel and power trough)
Bungee™ Design Guide
Bungee Design Guide Rev.00 03
BXK132QMP BXK156QMP BXK180QMP
Depth
72”66”60”48”42”36”
BX72QMPBX66QMPBX60QMPBX48QMPBX42QMPBX36QMP
BXL72QMPBXL66QMPBXL60QMP
---
30”Width 24” 20”BXM72QMPBXM66QMPBXM60QMP
---
BXWQMP
------
Square Modesty Panel
Square Modesty Panel
oror
Modesty
254mm
Back
Front
.75”
7.75”
9.5”
11’ 15’13’
Rectangular Trapezoid Wedge Transformer Tables
Tapered Spider
For:
Flip Top
2.75”5.94”
1.85”3.25”
• Grommet available in position AG1, AG2 and AG3.
• Grommet available in position E1, E2 and E3.
• Available in position V1, V2 and V3.
17.5”
AG1 AG2 AG3Ce
nter
AG23”
Cent
er
For 36”and 42”width units:
For 48”, 60” and 72“ width units:
AG2
Cent
er
3”
E2
Cent
er
4.5”
V2
Cent
er
AG2
Cent
er
5.75”
18.5”
E1 E2 E3
Cent
er
E2
Cent
er
For 36”,42”and 48”width units:
For 60” and 72“ width units:
For 36”,42”and 48”width units:
For 60” and 72“ width units:
E2
Cent
er
V2
Cent
er
19.5”
V1 V2 V3
Cent
er
V2
Cent
er
Grommet
Power Block
Rectangular Tops Keystone Tops 90˚ Wedge TopsHalf Moon Tops
3”5.25”
AG2AG1 AG3
Cent
er
17.5” 17.5”
• Not available.
• Not available.
Design Guide Grommets & Power Block
Bungee Design Guide Rev.00
Villa 2
Bungee™
04
17.5”
3”
3”
3”
3”
3”
4.5”
4.5”
4.5”
4.5”
19.5”
18.5”
or
Back-to-Back ApplicationsBack-to-Back Applications
Tapered LegSpider Leg
Rectangular Tops
Tapered Legs Spider Legs
or
Rectangular Return Tops
or
• Legs not included• Support Bar included for
units with 60”and 72” width.
• 2 Flush Plates included• Legs not included• Maximum Width: 54”
Design Guide
Bungee Design Guide Rev.00
Flat Bracket
Flat Bracket
Support Bar
36”-54” 36”-54”
36”-54”36”-54”
Front View
28”27”
10”
Bungee™
SharedPosition
SharedPosition
SharedPosition
SharedPosition
SharedPosition
SharedPosition
Flat Bracket
Flat Bracket
Tops with Legs and Plates Condition
05
Legend:
Single Straight Running Applications
Single Straight Running Applications
Square or Rounded Corner
Square Corner
Rounded Corner
Flat Bracket
Design Guide
or
Keystone Tops
Tapered Legs Spider Legs
or
90˚ Wedge Tops / 90˚Square Corners
• Legs not included with wedge top• Square Corner not available with
Spider Legs• Connect to 20” or 24” deep
Rectangular Table.
• 2 Tapered legs with levellers included
• Not available with Spider Legs• Does not connect with Spider
Legs Tables.
20”-24” 20”-24”
Half Moon Tops
or
• 2 Tapered legs with levellers included
• 1 Joining Plate included• Not available with Spider Legs• Does not connect with Spider
Legs Tables.
Joining Plate
Tops with Legs and Plates Condition Bungee™
Tapered LegSpider Leg
Bungee Design Guide Rev.00 06
Legend:
Square Corner
Rounded Corner
Flat Bracket
20”-24”
Design Guide Suggested Layouts
1 B2xSPLEG Spider Leg2 BS24WE 90º Wedge Top3 BS2448REC Rectangular Top4 B48MP13 Modesty Panel 5 BSFMS Filler Panel6 B29IFMS Filler Panel
1 B29TPLEG Tapered Leg2 BS2448HMF Half Moon Top3 BS2448REC Rectangular Top
1 B29TPLEG Tapered Leg2 BS2448REC Rectangular Top3 DGP1248 Divide Glaze Panel 12” H 4 DGP1224 Divide Glaze Panel 12” H5 DPOST12 Divide Post 12” H
6
5
45
2
2
3
3
1
1
1
2
43
Bungee Design Guide Rev.00
Bungee™
Tapered LegSpider LegLegend:
07
BDG Layout 1
BDG Layout 2
BDG Layout 3
Flat Bracket
Design Guide Suggested Layouts
Bungee Design Guide Rev.00
Legend:
5
4
2
2
3
34
6
1
1
Bungee™
1 B29TPLEG Tapered Leg2 BS2472REC Rectangular Top3 BS2448RRE Rectangular Return Top4 BS2448HMF Half Moon Top 5 DPOST12 Divide Post 12” H 6 DGP1272 Divide Glaze Panel 12” H
1 B30SPLEG Spider Leg2 BS3072REC Rectangular Top3 BS2436RRE Rectangular Return Top4 B2xSPLEG Spider Leg
Flat BracketTapered LegSpider Leg
08
BDG Layout 4
BDG Layout 5
Design Guide Power and Data Management Trough
Laminate Face Panel
Center Spine
Aluminum Face Panel
Design Guide Side ViewCode Dimensions Finishes
w d hJB72A 55.75” 4.25” 10JB60A 43.75” 4.25” 10JB48A 31.75” 4.25” 10JB42A 25.75” 4.25” 10JB36A 19.75” 4.25” 10
8.25” 7.25”• Face panel and back panel available in
Black (BK) or Silver (SI).
FRONT
FRONT
• Face panel and back panel available in Black (BLK) or Brushed Cobalt (BRC).
• Optional Filler Panel available.
• Optional Filler Panel available.
• Optional Filler Panel available.
Filler panel
w d hJB72L 55.75” 4.25” 10JB60L 43.75” 4.25” 10JB48L 31.75” 4.25” 10JB42L 25.75” 4.25” 10JB36L 19.75” 4.25” 10
• Face panel available in all Standard Bungee Laminate Finishes.
• Back panel available Black (BLK) or Brushed Cobalt (BRC).
w d hJB72C 55.75” 4.25” 10JB60C 43.75” 4.25” 10JB48C 31.75” 4.25” 10JB42C 25.75” 4.25” 10JB36C 19.75” 4.25” 10
Aluminum Face Panel
Laminate Face Panel
Center Spine
Filler panel
7.25”
Filler panel (x2)
JuiceBox Design Guide Rev.00 02
7.25”
4.25”
13” 7.25”4.25”
4.25”
Power and Data Management Trough
Design Guide
For Straight runs For 90˚ Application
Clamp / Power Snake / Cable Terminator Mount / End Cap
Filler Panel
• Extra clamps are sold separately.
• Attaches to underside of work surface. Used to organize and channel wires from the trough to the floor-in-feed.
• Black finish only.
Clamp
Power Snake
Grommets/Power Blocks
• Optional Grommets and Power Blocks are positioned directly above JuiceBox.
Grommet
Power Block Villa Corded
JuiceBox Design Guide Rev.00 03
• Additional End Cap for power troughEnd CapRequired for beginning and end of runs.
Power and Data Management Trough
top related