building materials 914-636-0505 phone 1 914-636-8951 fax materials color 8_6_12.pdf · building...
Post on 05-Jun-2020
10 Views
Preview:
TRANSCRIPT
1Building Materials 914-636-0505 Phone914-636-8951 Fax
www.pearlgreen.com
QUIKRETE COMPANIES
Blacktop Patch
Blacktop Patch - asphalt cold patch for repairing potholes and large cracks in asphalt pavement. Does not require heating or mixing, pour directly out of bag.
Can be formed and compacted. Patched area is ready for immediate use.
QUIKRETE COMPANIES
Mortar Mix
A blend of masonry cement and graded sand. A long lasting, strong bonding mortar. Just add water. 80 lb bag.
QUIKRETE COMPANIES
CementMasonry
QUIKRETE® Masonry Cement complies with current ASTM C91 and Federal Specifications from masonry cement. Available in Type S, Type N, and Type M.
QUIKRETE COMPANIES
Thin-Set
Thin-Set™ Sanded - a blend of portland cement, sand, and chemical additives. Addition of Acrylic Fortifier or Latex is recommended. Available in both gray and white. Apply to acceptable surfaces receiving absorptive, non-absorptive and semi-vitreous Tile. 50 lb.
QUIKRETE COMPANIES
CementPortland
Portland Cement complies with current ASTM C150 and Federal Specifications for portland cement. Can be mixed with aggregate and other ingredients to make concrete mix, mortar mix, and base coat stucco. Available in Type I, Type I/II and Type III.
CementSelf-Leveling
50 lbs/ Level Quik, Pourable, Cement Based, Self Leveling, Floor Underlayment which Mixes with Water Only, No Troweling Necessary, Use Level Quik Concentrated Latex Primer First.
CementWhite
White Cement - 94lbs
QUIKRETE COMPANIES
Marble Chips
Marble Chips, Medium. Use for landscaping around patios, decks, gardens, etc.
Mfg. No. PG No.
1701-60 BLACK
Mfg. No. PG No.
1102-80 MORTAR-M
Mfg. No. PG No.
1125-70 CEM-M
Mfg. No. Color PG No.
1550-50 Grey THINSET-G
1547-50 White THINSET-W
Mfg. No. PG No.
1260-94 CEM
Mfg. No. PG No.
SL150 CEM-SL
Mfg. No. PG No.
TYPE-1 CEM-WH
Mfg. No. PG No.
9906-50 MARBLE
2
www.pearlgreen.com
Pearlgreen CorporationThe Industrial Supply Group
Building Materials
www.pearlgreen.com
THORO CONSUMER PRODUCTS
Waterproof CoatingThoroSeal ®
• Heavy, cement-base powder
• Waterproofs and decorates masonry and concrete
• Comes in dry powder form, mix with Acryl® 60 and water
• Fills and seals pores and voids to correct surface irregularities
• Assures complete protection against water, dampness, and seepage
• Extensive usage - can be applied to interi-ors and exteriors, above or below ground, vertical, overhead, and non-traffic bearing surfaces
• Locks out or holds in water by actually becoming part of the wall when fully cured
• Resistant to mold and mildew
• 50 lb. bag
QUIKRETE COMPANIES
Concrete Mix
Original 4000 psi average compressive strength blend of portland cement, sand, and gravel or stone. Just add water. Use for any general concrete work. 80 lb bag.
POR-ROK
Dash Patch
A gysum based powder which, when mixed with water forms a plastic composition that can be troweled onto most surfaces to provide a smoother base for resilient or hard surfaces.
• Designed to have rapid setting, high strength, adhesion and workability
• Will not shrink or expand
QUIKRETE COMPANIES
Gravel
All-Purpose Gravel is a multi-use product for a variety of decorative and landscaping applications. Also for making concrete. Use for:
• Landscaping, Gardening, Patios, Tree Wells, Walks, Rooftops, Fish Ponds and Aquariums
• As a Decorative Extension to Stucco Wallcoating
• Mixing with Portland Cement and All Pur-pose Sand to Make Concrete
Washed Pea Gravel
Washed Pea Gravel - 50 lbs
QUIKRETE COMPANIES
GroutNon-Shrink
Non-Shrink, 10,000 psi General Purpose Grout - non-metallic portland cement based material including expansive additives. Add only water to obtain flowable properties. Non-shrink characteristics make it stable and capable of handling high load transfers. Use for: Grouting of Steel Columns and Precast Concrete. 50 lb. Bag.
GRAND PRIZE
Hydrated Lime
This single-hydrated, white finishing lime is made from high-purity dolomitic limestone, the finest available for use with gauging plasters. Requireing a minimum of 16 hrs. soaking to develop sufficient hydration. GRAND PRIZE
Mfg. No. Color PG No.
T1018 Gray THORO-G
T4002 White THORO-W
Mfg. No. PSI PG No.
1101-80 4000 CONCRETE-M
1007-80 5000 CONCRETE-M5000
Mfg. No. PG No.
02125 DASH
Mfg. No. PG No.
1151-50 GRAVEL
Mfg. No. PSI PG No.
PG No.
GRAVELW
Mfg. No. PG No.
1585-50 GROUT-NS
3Building Materials 914-636-0505 Phone914-636-8951 Fax
www.pearlgreen.com
Finishing Lime is specially formulated for compatibility with Gauging Plasters and Keenes Cements. The combination provides the high plasticity, tight bonding and smooth troweling sought by plasteres. Grand Prize Finishing Lime permits a thin finish coat, while the gauging plaster provides initial set and early hardness to minimize shrinkage of lime, for either smooth trowel or textures and float interior finishes. The end result is crack-resistant walls of longlasting beauty with a hard surface to resist abrasion. Complies with ASTM C206. 50 lb. Bag.
USG INTERIORS
Gauging Plaster
Gauging Plaster mixes with lime putty to produce a high-strength, durable, white, smooth trowel finish. Its excellent hardness- and abrasion-resistance make it ideally suited for high-traffic areas and other applications that require durability and abuse resistance.
DAPPlaster of Paris
Dry mix for general wall and ceiling repair. Sets fast in 20 - 30 minutes without shrinking. Smooth formula provides great results every time. Interior use.
Color: White
QUIKRETE COMPANIES
Sand Mix
Sand (Topping) Mix -original high strength blend of portland cement and graded sand. 40 and 80 lb bag. For use:
• Pouring Overlays Less Than 2" Thick
• Patching and Topping Chipped Concrete Surfaces
• Laying Flagstone and Paving Bricks
QUIKRETE COMPANIES
Sand
QUIKRETE® All-Purpose Sand is a washed, properly graded coarse sand with multi-purpose uses. Meets ASTM C 33 specifications. Available in 50 lb. bags. Use for:
• Underlayment for Brick Pavers
• Traction on Snow and Ice
• Mixing with Potting Soil
• Mixing with Portland Cement and Gravel to Make Concrete
Fine Sand
A consistently graded, washed and kiln dried sand used for industrial and construction applications. Use For:
• Underlayment for Patios/Walks
• Epoxy systems & industrial coatings
• Specialized cement mixtures
• Landscaping
• 100 lb. Bag
Play Sand
Play Sand specially graded sand that has been washed, dried and screened. For use in children’s sand boxes.
Mfg. No. Weight (lbs.) PG No.
00706 25 LIME-25
00706 50 LIME-50
Mfg. No. PG No.
02352 PL-50
Mfg. No.Size (lbs.)
Case Pack PG No.
10308 4 6 PL-04
10310 8 4 PL-08
10312 25 1 PL-25
Mfg. No. Size (lb.) PG No.
1103-80 80 SAND-M
1103-40 40 SAND-M40
Mfg. No. PG No.
1152-50 SAND
Type PG No.
O SANDO
OO SANDOO
Mfg. No. PG No.
5015 SANDPL
4
www.pearlgreen.com
Pearlgreen CorporationThe Industrial Supply Group
Building Materials
www.pearlgreen.com
W.R. GRACE
Fire Protection SpraysMonokote®
Monokote® Fireproofing - the world's most widely specified spray applied cementitious fireproofing. Protecting a building from fire is serious business. That's why Monokote® spray applied cementitious fireproofing is specified by architects and favored by applicators to protect a building's structural steel from failure in the event of fire. Recognized worldwide for their in-place performance and superior durability, Monokote products can be found in all types of buildings including high-rise construction, manufacturing facilities, schools, hospitals and sports facilities. These products provide a formidable last line of defense in the event of fire.
USG INTERIORS
Structo-Lite
Mill-mixed perlite-aggregate gypsum plaster provides a plastic working material that will conform to various designs and help achieve durability in walls and ceilings. Can be applied by hand or machine methods, on gypsum or metal lath, clay tile, concrete or cinder blocks and other approved bases. Mixes with water at the jobsite. Meets ASTM C28. Approximate coverage depends on what plaster is applied over base: Gypsum Lath 140 sq. ft., Metal Lath 89 sq. ft. and Unit Masonry 109 sq. ft.
ARMSTRONG
Ceiling Tile
Acoustical Ceiling Tile, multiple applications
• Color: White, Fissured Square, Lay-In Edge
• Wet -Formed Mineral Fiber
• Finish: Factory Applied Latex Paint
• Economical with good acoustical perfor-mance
• Directional fissured image
• Insulation Value: R factor - 1.5 (BTU units), R factor - 0.26 (watts units)
ARMSTRONG
Ceiling Tile
Acoustical Ceiling Tile. Resistant To Sag, Mold, Mildew and, Bacteria.
• Color: White
• Dimensions: 24 x 24 x 3/4 in.
• Case Quantity: 12
ARMSTRONG
Main Runner
1-1/2 in. x 12 in., White, Main Runner, Fire Rated, New EZ Cut Main Tee, Reduces Install Time andTotally Interchangeable With All System Components.
ARMSTRONG
Cross Tee
White, Cross Tee.
ARMSTRONG
Wall Angle
3/4 in. x 3/4 in. x 10 ft. White, Pre-Punched Wall Molding.
Mfg. No. PG No.
MK-6/HY MONOCOTE
Mfg. No. PG No.
02069 STRUCTO
Mfg. No.
Dimen-sions
(HxLxW in.)
Case Quantity PG No.
755 24x48x⁵⁄₈ 12 CT-755
756 24x24x⁵⁄₈ 16 CT-756
Mfg. No. PG No.
589-A CT-589
Mfg. No. PG No.
7500 CT-MAIN
Mfg. No.Dimensions
(in.) PG No.
ML7520 24 x ¹⁵⁄₁₆ x 1¹⁄₂ CT-TEE-2
ML7540 48 x ¹⁵⁄₁₆ x 1¹⁄₂ CT-TEE-4
Mfg. No. PG No.
7802 CT-WALL
5Building Materials 914-636-0505 Phone914-636-8951 Fax
www.pearlgreen.com
ARMSTRONG
Black Iron Channel1 1/2 in. x10 ft. Black Iron Channel.
ARMSTRONG
Rod to Channel ConnectorRod to Channel Connector.
ARMSTRONG
Channel to Main ConnectorChannel to Main Connector.
ARMSTRONG
Pencil Rod1/4 in. x10 ft. Pencil Rod.
KARP ASSOCIATES. INC.Access Door
Universal
The DSC-214M is a distinctly superior door for new installations or for remodeling. The exposed flange adds rigidity to the unit and perfectly conceals the rough wall opening. Flexible anchor straps can be provided for installation within masonry opening
• Specifications:
• Frame shall be 16 gauge steel and door 14 gauge steel
• Trim shall be 3/4 in. wide, one piece con-struction
• Hinge shall be concealed continuous piano hinge
• Locks shall we flush, screwdriver operated with stainless steel can and stud or cylinder lock with dust shutter
• Masonry anchor straps can be included on all frames if specified
• Finish shall be prime coat of rust inhibitive electrostatic powder; baked grey enamel. Stainless steel shall have Number 4 satin polish finish
KARP ASSOCIATES. INC.Access Door
Drywall
Access doors for drywall installations
The KDW has a textured frame and bead so drywall joint compound can be applied in sufficient thickness to conceal the flange. Prepunched holes in the flange facilities fastening the flange to framing members with drywall screws
Specifications:
• Frame shall be 16 gauge steel and door shall be 14 gauge steel
• Trim shall be galvanized drywall bead
• Hinge shall be concealed continuous piano hinge
• Locks shall be flush and screwdriver oper-ated with stainless steel can and stud or cylinder lock with dust shutter
• Finish shall be prime coat of rust inhibitive electrostatic powder, backed grey enamel.
Mfg. No. PG No.
112BI CT-CHANNEL
Mfg. No. PG No.
4B15LS CT-CON-1
Mfg. No. PG No.
78974X CT-CON-2
Mfg. No. PG No.
14R10 CT-PENCIL
Mfg. No.
Door Size (H x W) (in.)
Number of
Latches PG No.
DSC-214M
6 x 6 1 ACC-06
DSC-214M
8 x 8 1 ACC-08
DSC-214M
10 x 10 1 ACC-10
DSC-214M
12 x 12 1 ACC-12
DSC-214M
12 x 8 1 ACC-128
DSC-214M
14 x 14 2 ACC-14
DSC-214M
16 x 16 2 ACC-16
DSC-214M
16 x 12 2 ACC-1612
DSC-214M
18 x 18 2 ACC-18
DSC-214M
18 x 12 2 ACC-1812
DSC-214M
20 x 16 2 ACC-2016
DSC-214M
22 x 22 4 ACC-22
DSC-214M
24 x 24 5 ACC-24
DSC-214M
24 x 12 2 ACC-2412
DSC-214M
24 x 18 2 ACC-2418
DSC-214M
24 x 20 2 ACC-2420
DSC-214M
30 x 30 5 ACC-30
DSC-214M
30 x 20 5 ACC-3020
DSC-214M
30 x 22 5 ACC-3022
DSC-214M
30 x 24 5 ACC-3024
DSC-214M
36 x 36 5 ACC-36
DSC-214M
36 x 24 5 ACC-3624
DSC-214M
48 x 24 6 ACC-4824
Mfg. No.Door
Size (in.)
Number of
Latches PG No.
KDW 6 x 6 1 ACC-DW06
KDW 8 x 8 1 ACC-DW08
KDW 10 x 10 1 ACC-DW10
KDW 12 x 12 1 ACC-DW12
KDW 14 x 14 2 ACC-DW14
KDW 16 x 16 2 ACC-DW16
KDW 18 x 18 2 ACC-DW18
KDW 22 x 22 4 ACC-DW22
KDW 24 x 24 5 ACC-DW24
KDW 36 x 24 5 ACC-DW3624
6
www.pearlgreen.com
Pearlgreen CorporationThe Industrial Supply Group
Building Materials
www.pearlgreen.com
KARP ASSOCIATES. INC.Access Door
Fire Rated
The KRP-150FR is flush mounted with anchor straps and mounting holes to facilitate installation
Specifications:
• Frame and trim shall be 16 gauge steel, 1 in. wide
• Door shall be 20 gauge steel, welded pan type filled with 2 in. thick fire rated insula-tion and shall open to 175 deg., be self-latching with automatic closer and interior latch release
• Hinge shall be continuous piano hinge
• Latches shall be bolt type, operated by either ring turn or flush key device, both of which are provided and keyed alike, doors shall be prepared for locks which shall be supplied by others
• Finish shall be prime coat of rust inhibitive electrostatic powder, baked grey enamel. Stainless steel have number 4 satin polish finish
The KRP-150FR is insulated and rated by underwriters laboratories for 1.5 hour “B” label in walls, and may be used in a 2 hour fire rated wall assembly. Additionally, warnock hersey rates the KRP-150FR for 3 hours in ceilings
KARP ASSOCIATES. INC.Access Door
Plastic
HA plastic panel with removable hinge door
The handi-access plastic door is suitable for all surfaces and can be installed easily by applying glue or caulking adhesive to the back of the frame and pressing into place
Specifications:
• Door and frame shall be constructed from 1/8” high impact styrene plastic
• Door shall have pivot hinge enabling door panel to be hinged or removable
• Door panel shall be held closed with a snap friction catch and opened without special tools
• Finish shall be white lightly textured exposed surface for easy painting or wall-papering
Metal Door Frame
Metal door frames.
CALL FOR SIZING.
Metal Door
Hollow core metal doors.
CALL FOR SIZING.
Wood Door
Hollow core wood doors.
CALL FOR SIZING.
Mfg. No.
Door Size (H x W) (in.)
Number of
Latches PG No.
KRP-150FR
8 x 8 1 ACC-F08
KRP-150FR
12 x 12 1 ACC-F12
KRP-150FR
14 x 14 1 ACC-F14
KRP-150FR
16 x 16 1 ACC-F16
KRP-150FR
18 x 18 1 ACC-F18
KRP-150FR
22 x 22 1 ACC-F22
KRP-150FR
24 x 24 1 ACC-F24
KRP-150FR
24 x 12 1 ACC-F2412
KRP-150FR
30 x 30 1 ACC-F30
KRP-150FR
32 x 32 1 ACC-F32
KRP-150FR
36 x 36 2 ACC-F36
KRP-150FR
36 x 24 2 ACC-F3624
KRP-150FR
48 x 48 2 ACC-F48
KRP-150FR
48 x 24 2 ACC-F4824
KRP-150FR
48 x 36 2 ACC-F4836
Mfg. No.Door Size (H
x W) (in.) PG No.
HA 8 x 8 ACC-H08
HA 14 x 14 ACC-H14
Mfg. No.
Door Size (H x W) (in.)
Number of
Latches PG No.
7Building Materials 914-636-0505 Phone914-636-8951 Fax
www.pearlgreen.com
Masonite Tempered
Tempered Masonite.
Corex
4x8 ft. Corex. Use to protect walls and floors
Homasote
Homasote is a special-density, structural board made from 100 percent environmental cellulose fiber, a homogeneous composition manufactured with uniformly distributed protection against termites, rot and fungi and resistance to moisture. It also insulates, with twice the R-value of wood.
• Lightweight
• Easy to handle, cut and shape
• Ready to apply directly to framing
• Provides excellent noise attenuation when installed as recommended
• Provides excellent, moisture-resistant ther-mal insulation
Plexiglass
Clear Acrylic Plexiglass sheets. Size: 4 x 8 ft.; PLEX-3A 4x4 ft.
Plywood
4x8 ft. Plywood
PLYWOOD SPECIALTIES
Lumber
Dimensional Lumber
Size (ft.)Thickness
(in.) PG No.
4x8 1/8 MASON-T1
4x8 1/4 MASON-T2
4x4 1/8 MASON-T1A
4x4 1/4 MASON-T2A
Mfg. No. PG No.
CP484W COREX
Mfg. No. PG No.
11005 HOMASOTE
Thickness (in.) PG No.
1/8 PLEX-1
3/16 PLEX-2
1/4 PLEX-3
1/4 PLEX-3A
3/8 PLEX-4
Thickness (in.) Desc. PG No.
1/2 Birch PLY-B2
3/4 Birch PLY-B4
1/4 1-side Finished
PLY-1AC
1/2 1-side Finished
PLY-2AC
5/8 1-side Finished
PLY-3AC
3/4 1-side Finished
PLY-4AC
1/2 2-side Finished
PLY-2AB
3/4 2-side Finished
PLY-4AB
3/8 Rough PLY-1CD
1/2 Rough PLY-2CD
5/8 Rough PLY-3CD
3/4 Rough PLY-4CD
1/2 Fire Rated PLY-F2
5/8 Fire Rated PLY-F3
3/4 Fire Rated PLY-F4
1/2 Pressure Treated
PLY-PT2
3/4 Pressure Treated
PLY-PT4
Size(in.) Length (ft.) Desc. PG No.
1x2 8 Fir WOOD-102/08
1x2 10 Fir WOOD-102/10
1x2 12 Fir WOOD-102/12
1x3 8 Fir WOOD-103/08
1x3 10 Fir WOOD-103/10
1x3 12 Fir WOOD-103/12
1x4 8 Pine WOOD-104/08
1x4 10 Pine WOOD-104/10
1x4 12 Pine WOOD-104/12
1x6 8 Pine WOOD-106/08
1x6 10 Pine WOOD-106/10
1x6 12 Pine WOOD-106/12
1x8 8 Pine WOOD-108/08
1x8 10 Pine WOOD-108/10
1x8 12 Pine WOOD-108/12
1x10 8 Pine WOOD-110/08
1x10 10 Pine WOOD-110/10
1x10 12 Pine WOOD-110/12
1x12 8 Pine WOOD-112/08
1x12 10 Pine WOOD-112/10
Thickness (in.) Desc. PG No.
8
www.pearlgreen.com
Pearlgreen CorporationThe Industrial Supply Group
Building Materials
www.pearlgreen.com
Clamshell Moulding
2-1/4 in. Clamshell molding
AMERICAN WOOD MOLDING
Wood Shims
12 in. Wood Shim, 12/Pack.
Quarter Round Molding
Quarter Round Molding
Sheetrock
4 x 8 ft. Sheetrock
USG INTERIORS
WonderboardDUROCK®
DUROCK® cement board is a water-durable, mold-resistant panel for use under tile and
other finishes in a variety of interior and exterior applications.
Equally suitable for both wood and steel framing applications spaced 16" o.c. in new construction and remodeling, DUROCK cement board is ideal for use in partitions, walls, floors, soffits, countertops, and ceilings in wet or dry areas.
DUROCK cement board is moisture and mold resistant and does not deteriorate, swell, soften, decay, delaminate, or disintegrate in the presence of water, making it the perfect choice for baths, showers, kitchens, and laundry rooms. It is also suitable for exterior applications, including fences, mobile home skirting, agricultural buildings, garage wainscoting, and exterior finishes.
Drywall Corner Bead
1-1/4 in. Outside Drywall Corner Bead
U.S. GYPSUM
Plaster Corner Bead
SHEETROCK Dur-a-Bead corner bead features all-metal, galvanized steel reinforcement that protects external corners. The nose of the bead helps prevent damage from impact and provides a screed for finishing textures.
1x12 12 Pine WOOD-112/12
2x2 8 Fir WOOD-202/08
2x2 10 Fir WOOD-202/10
2x2 12 Fir WOOD-202/12
2x3 8 Fir WOOD-203/08
2x3 10 Fir WOOD-203/10
2x3 12 Fir WOOD-203/12
2x4 8 Fir WOOD-204/08
2x4 10 Fir WOOD-204/10
2x4 12 Fir WOOD-204/12
2x6 8 Fir WOOD-206/08
2x6 10 Fir WOOD-206/10
2x6 12 Fir WOOD-206/12
2x8 8 Fir WOOD-208/08
2x8 10 Fir WOOD/208/10
2x8 12 Fir WOOD-208/12
2x10 8 Fir WOOD-210/08
2x10 10 Fir WOOD-210/10
2x10 12 Fir WOOD-210/12
2x12 8 Fir WOOD-212/08
2x12 10 Fir WOOD-212/10
2x12 12 Fir WOOD-212/12
4x4 8 Fir WOOD-44/08
4x4 10 Fir WOOD-44/10
4x4 12 Fir WOOD-44/12
Mfg. No. PG No.
327 CLAMSHELL
Size(in.) Length (ft.) Desc. PG No.
Mfg. No. PG No.
10002 SHIMS
Thickness (in.) PG No.
1/2 QTR-1
3/4 QTR-2
Thick-ness (in.) Desc. Color PG No.
3/8 Regular White SR-1
1/2 Regular White SR-2
5/8 Fire Code White SR-3
1/2 Water-proof
Green SR-W1
5/8 Water-proof
Green SR-W2
5/8 Mold Resistant
Purple SR-Z
Thicknes (in.) PG No.
1/2 WONDERBOARD
5/8 WONDERBOARD-5
Mfg. No. Length (ft.) PG No.
1038OCB 8 CB-SR
1031OCB 10 CB-SR-10
9Building Materials 914-636-0505 Phone914-636-8951 Fax
www.pearlgreen.com
The bead installs quickly and easily by crimping or nailing to wood framing through the panels. It is concealed with USG joint compounds, delivering a smooth, finished corner.
“J” Corner Bead
”J” Corner bead
Metal Stud
Metal Stud
CAULKTITE CORP. Metal Track
Metal Track
Galvanized Wire Lath
2 x 8 ft. Galvanized Wire Lath.
U.S. GYPSUM
Joint Compound
62 lb. Pail, Ready Mix, All Purpose, Wallboard Joint Compound, Green Lid
U.S. GYPSUM
Joint CompoundLightweight
4.5 Gallon Pail, Plus 3, Lightweight, Ready Mix, Wallboard Joint Compound, Weighs 35% Less Than Conventional Compounds, Needs One Less Coat Over Metal, Sands With Ease Of Topping, Non-Asbestos, Blue Lid.
DAPJoint Compound
For smooth, high quality finishing of gypsum panel joints. Easy-to-use, ready-mixed formula is applied, has minimal shrinkage and sands easily. Interior use, Color: White. Size: 12 lb, 4/Case
Insulation Blanket
Mfg. No. Length (ft.) PG No.
800 8 CB-PL
800 10 CB-PL-10
Size (ft.) PG No.
8 CB-J
10 CB-J-10
Length (ft.) Size (in.) PG No.
10 2x1⁵⁄₈ STUD-2
8 2x1⁵⁄₈ STUD-28
10 2x2¹⁄₂ STUD-3
8 2x2¹⁄₂ STUD-38
10 2x3⁵⁄₈ STUD-4
8 2x3⁵⁄₈ STUD-48
Size (in.) Length (ft.) PG No.
2x1⁵⁄₈ 10 TRACK-2
2x2¹⁄₂ 10 TRACK-3
2x3⁵⁄₈ 10 TRACK-4
PG No.
LATH
Mfg. No. PG No.
380501 USG-5
Mfg. No. PG No.
380466 USG-5L
Mfg. No. PG No.
10102 USG-1
10
www.pearlgreen.com
Pearlgreen CorporationThe Industrial Supply Group
Building Materials
www.pearlgreen.com
6 ft. x25 ft. x1 in. Insulation Blanket.
Pegboard
Peg Board, 4 x 8 ft.
LARSEN PRODUCTS CORP.Concrete Bonding
Weld-Crete®
Weld-Crete® bonds new concrete, stucco, tile setting beds and terrazzo to any structurally sound surface, interior or exterior. Use Weld-Crete's® open time to your advantage in bonding to concrete shear walls when you need a time lapse between application of bonding agent, placement of reinforcement steel, placement of formwork and placement of concrete.
LARSEN PRODUCTS CORP.PlasterweldPlaster-Weld®
Plaster-Weld® bonds new plaster to any clean, structurally sound, interior surface. The original chemical plaster Weld-Cretebonding agent is a patented formulation incorporating polyvinyl acetate homopolymer. DESIGNED FOR INTERIOR USE ONLY, the high performance bonding of one-coat finish plaster and/or two and three coat work to concrete ceilings, walls, columns, beams, and other structurally sound surfaces. Plaster-Weld® prepares the surface to allow you to plaster directly to concrete over electric radiant heat cable, and to bond cement mortar beds to smooth concrete for installation of rigid foam insulation. Concrete, brick, block, glass, ceramic tile, wallboard, metals (e.g. sheet lead in x-ray rooms) and marble are suitable sound surfaces, structurally. Plaster-Weld® can be used over paints having oil, rubber or vinyl bases, and over silicone-treated surfaces, as well as latex paints.
QUIKRETE COMPANIES
Acrylic Fortifier
Concrete Acrylic Fortifier - a water-resistant acrylic resin admixture for portland cement-based repair and patching products. Provides increased bond strength when mixed with QUIKRETE® Sand Mix, QUIKRETE® SBC and other QUIKRETE® Repair Products. Use for applications requiring increased bond
strength and improved resistance to water penetration.
Common Brick3-Hole
Common brick, 3-hole, red color.
Common BrickSolid
Common brick, solid, red color
Concrete Brick
Cement/Concrete Brick, solid, gray color.
PG No.
BLANKET-I
Thickness (in.) PG No.
1/8 PEG-1
1/4 PEG-2
Mfg. No. PG No.
22000 WELDCRETE
Mfg. No. PG No.
12000 PWELD
Mfg. No. Size (gal.) PG No.
8610-01 1 ACRYLIC-G
8610-05 5 ACRYLIC
PG No.
BRICK-3
PG No.
BRICK
PG No.
BRICK-C
11Building Materials 914-636-0505 Phone914-636-8951 Fax
www.pearlgreen.com
Concrete Block
Concrete block, 8 in. High x 16 in. Wide
Rebar
Steel rebar, Length: 10ft.
Rebar Cap
Plastic Rebar Cap.
• Made of engineered high-impact plastic
• 16 Sq Inches top surface area aids in impalement protection
• Fits a range of diameters
• Self-centering formed steel insert seats cover perpendicular to rebar
POR-ROK
Anchor Cement
A non-shrink anchoring cement, mixed with only water, for interior applications. Use for setting anchor bolts and re-bar into concrete.
QUIKRETE COMPANIES
Anchor Cement
Anchoring Cement - a pourable cement that develops strength greater than concrete. Expands as it hardens and sets in 15-45 minutes. Just add water. 5 gal. Use for:
• Setting Bolts, Handrails, or Anything Metal to be Anchored in Concrete
• Ideal for Repairing Loose Wrought Iron Railings
AMSTONE
Driveway Blacktop Sealer
Driveway Blacktop Sealer. 5 gallon.
POR-ROK
Aqua Plug Cement
A quick setting, hydraulic cement used to stop water leakage.
QUIKRETE COMPANIES
Water-Stop Cement
Hydraulic Water-Stop Cement special formula allows product to obtain high strength and rapid setting while repelling water. 5 gal. Use for blocking running water or leaks in cracked masonry or concrete surfaces.
Thickness (in.) PG No.
4 BLOCK-4
6 BLOCK-6
8 BLOCK-8
10 BLOCK-10
12 BLOCK-12
Thickness (in.) PG No.
3/8 REBAR-1
1/2 REBAR-2
Mfg. No. PG No.
DISC-10 REBAR-CAP-I
Mfg. No. PG No.
48210 M-ANCHOR
Mfg. No. PG No.
1245-50 ANCHOR
Mfg. No. PG No.
566 DRIVEWAY
Mfg. No. PG No.
49110 M-AQUAPLUG
12
www.pearlgreen.com
Pearlgreen CorporationThe Industrial Supply Group
Building Materials
www.pearlgreen.com
POR-ROK
Concrete Patch
A high-strength, versatile product for concrete repair.
Antihydro Concrete Treatment
Anti-Hydro is a combination of organic and inorganic chemicals that reacts with portland cement to produce more complete hydration. Water requirements, bleed water and shrinkage are reduced. The increased hydration provides internal curing and a much harder cement paste. "Anti-Hydro" increases the early and ultimate strength of concrete. These combined reactions produce impermeable concrete that is hard and non-dusting.
Mortar PanPlastic
29 x 29 x 6 in. Polyethylene Mortar Pan, Heavy Duty Black Polyethylene Construction, Won't Rust Or Dent, Easy To Clean, Contractor Tough.
AMES TRUE TEMPER
Mortar PanSteel
Steel Mortar Pan
• Dimensions: 29.5 x 29.5 x 8 in.
• Capacity: 3 cu ft.
AMES TRUE TEMPER
Mixing BoxSteel
Steel Mixing Box
• Dimensions: 63 x35 x11 in.
• Capacity: 11 cu. ft.Mfg. No. PG No.
1126-60 WATERSTOP
Mfg. No. PG No.
51010 M-PATCH
PG No.
ANTIHYDRO
Mfg. No. PG No.
MP3007 MORTARPAN-P
Mfg. No. PG No.
1MP MORTARPAN
Mfg. No. PG No.
40MB MORTARPAN-11
top related