brochure material handler 850 crawler | sennebogen · 2020. 12. 8. · mp50 4-point pedestal...
Post on 07-Aug-2021
1 Views
Preview:
TRANSCRIPT
Crawler material handler
Stage V
21 m
68.5 t
268 kW (Stage IIIa) 298 kW (Stage V)
250 kW (Electro)
2 Subject to change. Additional options available upon request.
Advanced. The E-Series
Your top benefits
Safe entry and exit - no-slip steps State-of-the-art cameras - entire work area in view
Maximum safety
Maxcab comfort cab – work in comfort SENCON – work program selection made easy
Maximum usability
Durable mechanical systems - stressed parts optimized High speeds - high load capacities
Top-level performance
Save fuel - reduce operating costs Work quietly - protect operator and environment
Green Efficiency
3 production sites - 2 subsidiaries 150 sales partners - over 350 service stations
Consultation and support in your area
SENNEBOGEN control system - easy error diagnostics Simple maintenance - clear labeling
Maintenance and service made easy
1
2
3
4
5
6
1962: rope-driven S833 with elevated operator cab
What makes up the E-Series
65 years of experience in designing and constructing hydraulic material handling machines
Uncompromisingly high performance in all areas: Focus on material handling
Technology that can be mastered: High-quality components without over-engineering
Long service life and high value retention
3Subject to change. Additional options available upon request.
4
min-1
1800 ECOmin-1
0 min-1
1400 min-1
800
0 s 5 s 8 s 5 min
Work Idle Stop
23
Up to 20 % savings: work in EcoMode with reduced engine speed
Idle automation reduces speed to 40 % of operating speed
Stop automation switches the engine off when not needed
Optimized engine settings, reduced specific fuel consumption, state-of-the-art exhaust after treatment
Four ways to save fuel
Quiet operation Consistently quiet operation thanks to de-coupled engine mounts and sound proofing in the doors
Sound pressure level in accordance with 2000/14/EC as much as 2 dB lower than required
High-capacity cooling Constant, reliable performance thanks to large-dimensioned and robust fans and coolers
Water and oil coolers with top-notch effi-ciency thanks to axial-piston pump and motor control and on-demand thermostatic control
Fan reversal for cleaning in series
4
2 3
The E-Series. At a glance.
5
Powerful hydraulic system Strong pumps with power reserves Top efficiency thanks to large hydraulic valves and lines
Extra-long change intervals of 4,000 operat-ing hours through initial fill-up with special oil with extended service life when using SENNEBOGEN HydroClean*
4
* Option
Illustration shows mobile version
1
No-slip work surfaces Hand rails* 2 cameras to the right and rear Step grid with railing next to cab sliding door
Maximum safety
6
SSchiebbeetüürrr
SSSSSSSEEEEEENNCCCCCCOOOOOONNNN
The premium cab.
consoles and ergonomic joysticks that move with the seat
pleasant grip through ergonomic design
precise control of all movements through direct and sensitive function activation
quick access to all operating controls through optimized design of all push-buttons and switches
ticks
mic design
ents
optimum cab climate with automatic air conditioning system, partial tinted glass
pleasant and equal temperature disper-sion by means of 9 nozzles
panoramic view
comfort seat with air suspension
very quiet through optimized noise insulation
Highest safety & comfort with sliding door, wide door opening
ergonomically arranged operating con- trols for fatigue-free and relaxed working
12 V, 24 V, and USB charging sockets hands-free telephone preparation, do-cument box
various options: electric cool box behind driver`s seat, seat air conditioning
Features
7
SENNEBOGEN-Hydro Clean*
Optimal protection of hydraulic components thanks to 3 μm micro-filter
Cleaner hydraulic oil, longer service life
* Option
Maintenance and service made easy.
Central measuring points
Easily accessible Quickly inspect entire hydraulic system
Clear labeling
All parts labeled with a unique part number
Easy and reliable spare parts ordering
SENHyd
OptimhydrthanfilterCleanlonge
Fast and easy diagnosis thanks to straightforward and clearly labeled electrical distributor
Easy access to all service points on the machine
Automatic central lubrication for equipment and slewing gear raceway
Optimized for maintenance
8
Modular design - versatile solutions
3.00 m
2.60 m
E300/260
E270
2.70 m
Attachments
Orange peel grab
Clamshell grab
Magnetic plate
Timber grab
Equipment options (others available upon request)
Undercarriage variants
Uppercarriage
Cabs Cab elevation K19K17 K21
M Diesel-hydraulic drive
Electrohydraulic drive
Motorized cable reel
Transformer
Options
B17
R73/420 crawler
R70/490 crawler
Mobile E* MP50
4-point pedestalST78/550
Maxcab Industry
Maxcab
B19 B20
* Additional information on our mobile undercarriages can be found in the 850 R E-Series brochure.
Max.1,5m
Max.3,0m
Max.1,0m
Max.3,0m
Max.1.5 m
Max.1.0 m
Max.3.0 m
Max.4.0 m
9
Advantages at a glance
9
Advantages at a glance
Safe entry and exit thanks to railings, grip handles and no-slip steps
Ideal overview and safe working height thanks to stable cab elevation
Extensive lighting concept
Easy accessibility to all service points of the machine
* Option
- decade-long experience- most advanced computer simulation- the greatest degree of stability and longest service life
Various attachments available (page 25)
10
Technical data, equipment R
SLEWING DRIVEGearbox 2-part compact planetary gear with slant-ax-
is hydraulic motor in a closed hydraulic circuit ensures powerful rotary drive.
Parking brake Spring-loaded multi-disk brake
Slewing ring Very strong slewing ring sealed with pinion lubrication
Slewing speed 0-6 min1, variable
UPPERCARRIAGEDesign Torsion-resistant box design,
crafted, steel bushings for boom bearings.Clear, service-friendly concept, engine installed in the longitudinal direction
Central lubrication
Automatic central lubrication system
Electrical system
Central electrical distributor, battery disconnect switch
Cooling system Compact 3-circuit cooler unit with high cool-ing output, thermostatically controlled fan drive to reduce energy consumption and noise emissions
Options Slewing gear brake via foot pedal Hand rail at the upper structure LED lighting packages Fire extinguisher Sea climate resistant coating as corrosion protection
Electric heater for hydraulic tank Low temperature packages Hydraulically-driven magnetic generator 20 kW / 25 kW
Telematic system SENtrack DS
HYDRAULIC SYSTEM Load-sensing/ LUDV hydraulic system for work and travel systems
Pump type Swash plate-type variable-displacement piston pump, load pressure-independent flow distri-bution for simultaneous, independent control of work functions
Pump control Zero-stroke control, on-demand flow control - the pumps only pump as much oil as will actually be used, pressure purging, load limit-ing, sensing control
Operating pressure
330 bar
Filtration High-performance filtration with long change interval, optional SENNEBOGEN HydroClean micro-filter water separation system
Hydraulic tank 700 lFlow rate max.
2 x 450 l/min; up to 280 l/min for rotary drive in the closed circuit
Control system Proportional, precision hydraulic actuation of work movements, 2 hydraulic servo joysticks for the work functions, additional functions via switches and foot pedals
Cooling Very oversized cooler unit with thermostatically controlled fan drive
Safety Hydraulic circuits with safety valves, secured emergency lowering of the equipment at engine standstill, pipe fracture safety valves for lift cylinder and stick cylinder
Options Bio-oil – environmentally friendly Tool Control for programming pressure/rate of up to 10 tools
Supplemental hydraulic circuit for shear attachment
Load torque warning with capacity display Overload safeguard with shutdown 60 μm pressure filter for attachments 3 μm hydraulic micro-filter - SENNEBOGEN HydroClean
ENGINEPower 268 kW at 1800 rpm (Stage IIIa)
298 kW at 1800 rpm (Stage V)Model Cummins QSM 11 - Stage IIIa
Cummins X 12 - Stage V Direct injection, turbo charged, intercooling, reduced-emission, ECO mode, idle automation
Cooling Water-cooled
Air filter Dry filter with pre-separator, automatic dust discharge, main element and safety element, contamination indicator
Fuel tank 810 lDEF tank 110 lElectr. system 24 VBatteries 2 x 150 Ah, battery disconnect switch
Options Engine block heater Electric fuel pump
MACHINE TYPEModel (type) 850
11
R
Technical data, equipment
Subject to change.
R
EQUIPMENTDesign Decades of experience and the latest com-
puter simulations guarantee the greatest degree of stability and life-span. Oversized bearing points with low-main-tenance, sealed special bushings, preci-sion-crafted.
Cylinders Hydraulic cylinders with high-quality sealing and guide elements,end position damping, sealed bearing points
Options Ball valves in the hydraulic lines for quick and easy grab switching
Sea climate resistant coating Sea climate resistant coating of all cylin-ders, nickel-plated and chrome-plated
Float position of the equipment Hoisting limiter / stick limitation adjustable for stop settings, e.g. in the hall
OPERATING WEIGHTMass
Note
approx. 68,500 kg basic 850 R machine with R73/420 undercarriage, K17 with grab
Operating weight varies by model andequipment.
ELECTRIC DRIVE Option Power: 250 kW / 400 V / 50 Hz
Total connected load 410 kVA, machine side fuse 500 A (alternatively 630 A with magnet system) for 400 V - star-delta connection motor start
Advantages: lowest operating costs, low-noise and virtually vibration-free work, long service life of the hydraulic components
Parking brake Spring-loaded, hydraulically ventilated disk brakes. Hydraulic brake valves protect the drive engines when moving downhill.
Traveling gear R73-420 telescopic crawler undercarriage with 2.65 – 4.2 m mechanical track adjustment and maintenance-free B7 crawler track (64 links, 6,650 mm long) with canted 800 mm triple grouser track shoes
Speed 0 - 1.6 km/h Stage I, 0 - 3 km/h Stage II
Options R70-490 special undercarriage with integrated 2 m pylon
Maintenance-free B7 crawler track with 900 mm flat track shoes
UNDERCARRIAGEDesign Wide-gauge crawler undercarriage in stable,
torsionally rigid box construction
Drive Hydraulic travel drive, integrated in the trav-eling gear frame for each traveling gear side through an axial piston motor via compact planetary gear.
CAB Cab elevation E270, hydraulically elevating cab
Cab equipment Sliding door inc. sliding pane, vibration damped, tinted safety glass, front pane can be openend, roof window, windscreen wiper for front pane, radio preparation, air-suspended comfort seat, joystick steering, SENNEBOGEN SENCON control & diagnosis system
Options Tiltable cab, 30 ° Cab elevation E300/260, can be elevated and moved forward hydraulically
Maxcab Industry Armored-glass windshield Armored-glass sunroof Safety side window and rear window Windscreen wiper for front window/ skylight
Rolling shade for roof window and windshield
FOPS protective roof guard Protective front guard Charcoal filter for circulating and outside air Auxiliary heating Climatic seat Radio Electric cool box
12
Load ratings
R
R
8
20 10864 181612 14
-4
20
-6
-8
6
-2
00
4
2
18
10
16
14
12
20
9.3
15.8
18.9
21.1
23.0
13.4
9.6
8.9
9.1
9.7
13.6
14.5
15.6
16.8
17.9
18.6
18.6
16.8
15.1
7.8
9.7
10.9
11.6
11.7
12.1
12.6
13.3
14.0
14.7
15.1
15.2
14.9
14.1
12.7
8.0
9.6
10.6
10.7
10.9
11.2
11.7
12.1
12.5
12.8
12.8
12.5
11.9
10.8
7.7
9.4
9.8
9.9
10.1
10.4
10.7
10.9
11.0
11.0
10.7
10.2
9.2
7.1
8.8
9.1
9.3
9.4
9.5
9.6
9.7
9.6
9.2
8.7
7.5
8.5
8.5
8.6
8.6
8.5
8.3
7.9
7.2
6.2
7.2
7.6
7.4
7.1
[m]
Technical features and dimensions subject to change.
R
All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on solid, level ground. Attachments such as grabs, magnets, load hooks, etc. are part of the specified load ratings. The specified values are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567. In accordance with EU standard EN 474 / 5, hydraulic material handling machines used for hoisting must be equipped with pipe fracture safety devices on the hoist and stick cylinders and an overload warning device.
Compact boom: 10 m
Grab stick: 7.5 m
Cab: Maxcab E270,can be elevated hydraulically
Undercarriage: R73/420
Machine shown reversed
K17KIN 1
I.11032010161603
13
Load ratings
R
R
8
20 10864 181612 14
-4
20
-6
-8
6
-2
0
4
2
18
10
16
14
12
20
22
22
24
-1024
17.8
19.5
18.4
7.3
5.5
5.2
5.4
13.4
14.3
15.2
16.0
16.5
11.1
8.9
8.2
8.1
7.4
10.9
11.4
12.0
12.6
13.0
13.3
13.4
13.1
12.6
11.7
10.5
6.3
7.4
8.1
8.7
9.1
9.2
9.4
9.6
10.0
10.3
10.7
11.0
11.2
11.2
11.1
10.7
10.0
9.1
6.4
7.3
8.1
8.2
8.3
8.4
8.6
8.8
9.1
9.3
9.5
9.6
9.6
9.5
9.2
8.7
7.9
6.3
7.2
7.5
7.6
7.7
7.8
7.9
8.1
8.2
8.3
8.4
8.4
8.2
8.0
7.5
6.9
6.1
7.0
7.0
7.0
7.1
7.2
7.3
7.4
7.4
7.4
7.4
7.2
7.0
6.5
5.9
5.6
6.4
6.5
6.5
6.5
6.6
6.6
6.7
6.6
6.5
6.4
6.1
5.7
5.0
5.7
5.8
6.0
6.0
6.0
6.0
6.0
5.9
5.8
5.6
5.3
4.8
5.1
5.3
5.5
5.4
5.4
5.3
5.1
4.8
4.4
All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on solid, level ground. Attachments such as grabs, magnets, load hooks, etc. are part of the specified load ratings. The specified values are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567. In accordance with EU standard EN 474 / 5, hydraulic material handling machines used for hoisting must be equipped with pipe fracture safety devices on the hoist and stick cylinders and an overload warning device.
Compact boom: 12.1 m
Grab stick: 9.5 m
Undercarriage: R73/420 Cab: Maxcab E270,can be elevated hydraulically
[m]
R
Technical features and dimensions subject to change.
Machine shown reversed
K21KIN 1
I.15032010120146
14
Load ratings
R
R
8
20 10864 181612 14
-4
20
-6
-8
6
-2
0
4
2
18
10
16
14
12
20
22
22
-10
18.4
20.3
21.9
9.4
7.0
6.6
6.9
12.9
13.9
14.9
16.0
17.0
17.5
15.0
11.8
10.9
10.8
7.8
9.0
9.8
10.5
10.8
11.1
11.4
12.0
12.6
13.3
13.9
14.2
14.3
14.0
13.4
12.3
7.9
9.0
9.7
9.8
9.9
10.2
10.6
11.0
11.4
11.8
12.0
12.0
11.8
11.3
10.5
7.0
7.8
8.9
8.9
9.0
9.2
9.5
9.7
10.0
10.2
10.3
10.3
10.1
9.7
9.0
6.5
7.5
8.3
8.3
8.4
8.6
8.7
8.9
9.0
9.0
9.0
8.8
8.4
7.8
6.3
7.0
7.7
7.7
7.8
7.9
8.0
8.0
8.0
7.9
7.7
7.3
6.6
6.5
7.1
7.2
7.2
7.2
7.2
7.1
6.9
6.7
6.2
6.0
6.2
6.5
6.4
6.3
6.0
5.6
[m]
.
Technical features and dimensions subject to change.
R
All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on solid, level ground. Attachments such as grabs, magnets, load hooks, etc. are part of the specified load ratings. The specified values are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567. In accordance with EU standard EN 474 / 5, hydraulic material handling machines used for hoisting must be equipped with pipe fracture safety devices on the hoist and stick cylinders and an overload warning device.
Compact boom: 11 m
Grab stick: 8.4 m
Undercarriage: R73/420 Cab: Maxcab E270,can be elevated hydraulically
Machine shown reversed
K19KIN 1
I.12032010081814
15
Load ratings
R
R
19.7
17.1
7.9
6.4
6.3
6.7
7.2
15.5
17.3
18.7
13.2
10.9
10.3
10.4
10.8
11.8
13.0
14.1
15.0
15.7
15.3
15.1
15.0
15.0
9.8
10.5
11.2
12.0
12.6
12.8
12.5
12.3
12.2
12.2
6.7
8.6
9.0
9.4
10.0
10.5
11.0
10.7
10.5
10.3
10.2
10.2
6.5
7.7
7.7
7.8
8.0
8.3
8.6
9.0
9.4
9.4
9.1
9.0
8.9
8.8
8.8
6.4
7.4
7.5
7.6
7.8
8.0
8.3
8.3
8.1
7.9
7.8
7.7
7.7
7.7
6.4
7.2
7.3
7.5
7.3
7.2
7.1
7.0
6.9
6.8
6.8
6.4
6.5
6.4
6.3
6.2
6.2
6.1
8
20 10864 181612 14
-4
20
-6
-8
6
-2
0
4
2
18
10
16
14
12
20
22
-10
-12
All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on solid, level ground. Attachments such as grabs, magnets, load hooks, etc. are part of the specified load ratings. The specified values are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567. In accordance with EU standard EN 474 / 5, hydraulic material handling machines used for hoisting must be equipped with pipe fracture safety devices on the hoist and stick cylinders and an overload warning device.
Compact boom: 11 m
Grab stick: 8.4 m
Cab: Maxcab E300/260, can be elevated and moved forward hydraulically
Undercarriage: R73/420
[m]
Technical features and dimensions subject to change.
R
II.12032010102710
Machine shown reversed
KIN 2K19
16
R
R
8
20 10864 181612 14
-4
20
-6
-8
6
-2
0
4
2
18
10
16
14
12
22
-10
-12
17.1
19.3
17.0
9.4
7.8
7.6
7.9
8.3
12.7
13.9
15.1
16.3
17.1
14.8
12.5
11.7
11.7
7.2
10.4
11.0
11.8
12.5
13.3
13.8
14.1
14.1
13.8
13.1
12.0
7.5
8.9
8.9
9.1
9.4
9.8
10.3
10.8
11.3
11.7
11.9
11.9
11.7
11.1
10.3
7.4
8.3
8.4
8.6
8.9
9.2
9.5
9.8
10.1
10.2
10.2
10.0
9.6
8.8
7,5
7.8
7.9
8.1
8.3
8.5
8.7
8.9
9.0
8.9
8.7
8.3
7.5
6,8
7.4
7.5
7.6
7.8
7.9
8.0
8.0
7.8
7.6
7.1
6.7
7.1
7.1
7.1
7.1
6.9
All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on solid, level ground. Attachments such as grabs, magnets, load hooks, etc. are part of the specified load ratings. The specified values are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567. In accordance with EU standard EN 474 / 5, hydraulic material handling machines used for hoisting must be equipped with pipe fracture safety devices on the hoist and stick cylinders and an overload warning device.
Compact boom: 10.8 m Banana
Grab stick: 7.5 m
Cab: Maxcab E300/260, can be elevated and moved forward hydraulically
Undercarriage: R73/420
[m]
Technical features and dimensions subject to change.
Load ratings R
I.11032010112438
Machine shown reversed
B17KIN 1
17
Load ratings
R
R
16.6
18.4
10.1
6.4
5.6
5.7
6.0
6.4
12.2
13.2
14.3
15.2
13.9
10.1
8.9
8.5
8.6
8.8
9.8
10.4
11.0
11.7
12.3
12.7
12.9
12.8
12.5
12.0
11.1
8.2
8.4
8.7
9.1
9.5
9.9
10.3
10.6
10.8
10.8
10.6
10.2
9.6
8.6
7.4
7.4
7.5
7.6
7.8
8.1
8.4
8.7
8.9
9.2
9.3
9.3
9.1
8.8
8.3
7.5
6.0
6.9
6.9
7.0
7.1
7.3
7.5
7.7
7.9
8.0
8.1
8.1
7.9
7.7
7.2
6.5
6,1
6.4
6.5
6.6
6.7
6.8
6.9
7.1
7.1
7.2
7.1
7.0
6.7
6.2
6.1
6.1
6.2
6.2
6.3
6.4
6.4
6.4
6.3
6.2
5.8
5.3
5.7
5.7
5.8
5.8
5.8
5.7
5.6
5.4
5.9
7.4 6.0
8
20 10864 181612 14
-4
20
-6
-8
6
-2
0
4
2
18
10
16
14
12
20
22
22
-10
-12
All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on solid, level ground. Attachments such as grabs, magnets, load hooks, etc. are part of the specified load ratings. The specified values are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567. In accordance with EU standard EN 474 / 5, hydraulic material handling machines used for hoisting must be equipped with pipe fracture safety devices on the hoist and stick cylinders and an overload warning device.
Compact boom: 12 m Banana
Grab stick: 8.4 m
Undercarriage: R73/420 Cab: Maxcab E300/260, can be elevated and moved forward hydraulically
[m]
R
Technical features and dimensions subject to change.
I.15032010152641
Machine shown reversed
KIN 1 B19
18
Load ratings
R
R
8
20 10864 181612 14
-4
20
-6
-8
6
-2
0
4
2
18
10
16
14
12
20
22
22
-10
-12
16.9
18.6
9.7
7.0
6.2
6.1
6.3
6.5
12.2
13.3
14.3
15.1
13.2
10.1
9.0
8.6
8.6
9.7
10.3
11.0
11.6
12.2
12.5
12.6
12.5
12.2
11.5
10.6
8.2
8.5
9.0
9.4
9.9
10.2
10.5
10.6
10.5
10.3
9.8
9.1
6.0
7.0
7.0
7.0
7.2
7.4
7.6
7.9
8.3
8.6
8.8
9.0
9.1
9.0
8.8
8.5
7.9
4.8
6.0
6.5
6.5
6.6
6.7
6.9
7.1
7.4
7.6
7.7
7.9
7.9
7.9
7.7
7.4
6.8
4.6
5.7
6.1
6.1
6.2
6.3
6.5
6.6
6.8
6.9
7.0
7.0
6.9
6.7
6.4
5.9
5.2
5.7
5.8
5.9
6.0
6.1
6.1
6.2
6.2
6.2
6.1
5.9
5.6
5.0
5.3
5.4
5.5
5.6
5.6
5.6
5.6
5.6
5.4
5.2
5.0
5.1
5.1
All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on solid, level ground. Attachments such as grabs, magnets, load hooks, etc. are part of the specified load ratings. The specified values are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567. In accordance with EU standard EN 474 / 5, hydraulic material handling machines used for hoisting must be equipped with pipe fracture safety devices on the hoist and stick cylinders and an overload warning device.
Compact boom: 12 m Banana
Grab stick: 9.5 m
Cab: Maxcab E300/260, can be elevated and moved forward hydraulically
Undercarriage: R73/420
[m]
Technical features and dimensions subject to change.
R
I.15032010143249
Machine shown reversed
KIN 1 B20
19
Load ratings
Technical features and dimensions subject to change.
R
R
R
8
20 10864 181612 14
-4
20
-6
-8
6
-2
0
4
2
18
10
16
14
12
22
-10
-12
-14
6.0
3.8
3.7
4.0
4.4
4.8
5.2
18.1
8.4
6.4
5.9
5.9
6.1
6.4
6.6
13.8
15.3
11.7
9.4
8.6
8.3
8.3
8.5
8.8
11.2
12.2
13.1
13.8
13.7
12.4
11.9
11.9
12.2
8.7
9.5
10.2
10.9
11.5
11.9
12.2
12.1
12.1
11.8
7.7
8.3
8.8
9.4
9.8
10.2
10.2
10.2
10.1
10.1
6.6
7.0
7.4
7.8
8.2
8.6
8.9
8.8
8.7
8.7
8.8
5.6
5.9
6.1
6.4
6.8
7.1
7.4
7.7
7.8
7.7
7.6
7.6
7.7
5.2
5.3
5.4
5.6
5.8
6.0
6.2
6.5
6.7
6.9
6.9
6.8
6.7
6.8
4.7
5.2
5.3
5.5
5.6
5.8
6.0
6.2
6.2
6.1
6.0
4.8
5.3
5.5
5.6
5.6
4.5
All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on solid, level ground. Attachments such as grabs, magnets, load hooks, etc. are part of the specified load ratings. The specified values are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567. In accordance with EU standard EN 474 / 5, hydraulic material handling machines used for hoisting must be equipped with pipe fracture safety devices on the hoist and stick cylinders and an overload warning device.
Compact boom: 12 m Banana
Grab stick: 9.5 m
Cab: Maxcab E300/260, can be elevated and moved forward hydraulically
Undercarriage: R73/420
Pylon: 1.5 m
[m]
II.13042010110847
Machine shown reversed
KIN 2B20
20
Load ratings
Technical features and dimensions subject to change.
R
R
R
8
20 10864 181612 14
-4
20
-6
-8
6
-2
0
4
2
18
10
16
14
12
20
22
22 24-10
y
15.0
4.8
3.7
3.8
4.2
4.6
4.9
5.3
12.5
7.4
6.2
5.9
6.0
6.2
6.4
6.7
12.7
14.3
15.4
10.6
9.0
8.4
8.3
8.4
8.6
10.4
11.5
12.6
13.4
14.0
13.2
12.2
11.8
11.9
12.4
9.0
9.7
10.5
11.1
11.6
12.0
12.2
12.2
12.1
11.6
7.4
7.9
8.5
9.0
9.5
9.9
10.3
10.4
10.5
10.4
10.0
6.3
6.7
7.1
7.6
8.0
8.4
8.7
8.9
9.1
9.1
9.0
8.7
5.7
5.9
6.2
6.5
6.9
7.2
7.5
7.7
7.9
8.1
8.1
7.9
7.6
4.8
5.2
5.3
5.4
5.6
5.8
6.1
6.3
6.6
6.8
7.0
7.1
7.2
7.2
5.0
5.2
5.4
5.5
5.7
5.9
6.1
6.3
6.4
6.5
6.5
5.0
5.4
5.6
5.7
5.8
Machine shown reversed
KIN 2B20
All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on solid, level ground. Attachments such as grabs, magnets, load hooks, etc. are part of the specified load ratings. The specified values are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567. In accordance with EU standard EN 474 / 5, hydraulic material handling machines used for hoisting must be equipped with pipe fracture safety devices on the hoist and stick cylinders and an overload warning device.
Compact boom: 12 m Banana
Grab stick: 9.5 m
Cab: Maxcab E300/260, can be elevated and moved forward hydraulically
Undercarriage: R70/490
Pylon: 3 m
II.13042010110847
[m]
3 m
21
Dimensions R
3250675
4200
440
800
50005390
1275
2650transport width=3500
3430
2650
6080
3585
1480
5650
6650
1480
3585
3485
3000
3480
6480
2600
850 R with R73/420 undercarriage and Maxcab E270, can be elevated hydraulically
850 R with R73/420 undercarriage and Maxcab E300/260, can be elevated and moved forward hydraulically
22
Dimensions R
3250
5500
7285
2650
9935
6500
5810
5340
4780
6690 77
90
55006500
3585
35853000
7335
1033
5
2600
5340
4780
6690 77
90
55006500
850 special with 4-point ST78/550 pedestal and 3.0 m pylon, Maxcab E300/260 can be elevated and moved forward hydraulically
850 special with 4-point ST78/550 pedestal and 3.0 m pylon, Maxcab E270 can be elevated hydraulically
3 m 3 m
3 m
23
Dimensions
Technical features and dimensions subject to change.
R
850 R special with R70/490 undercarriage and 3.0 m pylon, Maxcab E300/260 can be elevated and moved forward hydraulically
850 R special with R70/490 undercarriage and 3.0 m pylon, Mastercab Skylift 900 can be elevated hydraulically
4200
4765
1336
0
64852755
4335
1800
35853000
8405
1140
5
2600
54506450
6410
5850
7760
8860 3 m 3 m
3 m
3250
49005700
5810
800
1120
24
H
L
Transport dimensions R
Technical features and dimensions subject to change.
Load boom Grab stick Transport length (L) Transport height (H)
K17 10.0 m 7.50 m 14.60 m 3.50 mK19 11.0 m 8.40 m 15.60 m 3.60 mK21 12.10 m 9.50 m 16.70 m 3.85 mB17 10.8 m Banana 7.50 m 15.20 m 3.60 mB19 12.0 m Banana 8.40 m 16.40 m 3.70 mB20 12.0 m Banana 9.50 m 16.40 m 3.70 m
Note:
This catalog describes machine models, scope of equipment of individual models, and configuration options (standard equipment and optional equipment) of the machines delivered by SENNEBOGEN Maschinenfabrik GmbH. Machine illustrations can contain optional equipment and supplemental equipment. Actual equipment may vary depending on the country to which the machines are delivered, especially in regard to standard and optional equipment and tolerances.
25
Recommended grabs
Dimensions in [mm]Detailed information on grabs, as well as log grabs, quick-release systems, and other attach-ments can be found in the "Attachments" brochure
Design/size Grab capacityWeight1 max.
piled densityShell shape 2
HO G
SGM l kg kg t / m3
800.50 800 2580 2740
2.0
1000.50 1000 2710 2870
1500.50 1500 2860 3100
2000.50 2000 3060 3615
2500.50 2500 3130 3615
3000.50 3000 3250 3875
3500.50 3500 3420 4140
Type series/model Power Dead weight Pull-off strength
Load-bearing capacity in kg
WOKO kW kg kN Slab (safety factor 2)
S-RLB 15 11.7 2400 380 19000
S-RLB 17 17.8 3300 640 32000
S-RLB 19 22.0 5090 790 39500
Recommended magnetic generator: 20 - 25 kW
SGM orange peel grab (5 shells)
Design/size Grab capacity Weight1 max. piled density
SGZ l kg t / m3
1500.50 1500 19502.6
2000.50 2000 2200
2500.50 2500 23002.0
3000.50 3000 2490
4000.50 4000 2800 1.6
SGZ clamshell grab
Magnetic plates
SGM orange peel grab (4 shells)
1) Weight information without grab suspension, stick bolts, hose system
2) Half-open shells: shell sheet steel width 400 mm, 500 mm for 1,250 l capacity and higher
*) Available upon request
Design/size Grab capacityWeight1 max.
piled densityShell
HO G
SGM l kg kg t / m3
800.50-4 800 2245 2490
2.01000.50-4 1000 2345 2585
1500.50-4 1500 2475 2830
2000.50-4 2000 2660 3075
26
850 M - with orange peel grab - scrap handling; Austria
850 M - with magnet plate - truck loading; USA
27850 R special electro - with orange peel grab - loading of a scrap shear; France
www.sennebogen.com
R
SENNEBOGEN Maschinenfabrik GmbH Sennebogenstraße 10 94315 Straubing, Germany
Tel. +49 9421 540-144/146marketing@sennebogen.de
This catalog describes machine models, scopes of equipment of individual models, and configuration options (standard equipment and optional equipment) of the machinesdelivered by SENNEBOGEN Maschinenfabrik GmbH. Machine illustrations can contain optional equipment and supplemental equipment. Actual equipment may vary dependingon the country to which the machines are delivered, especially in regard to standard and optional equipment and tolerances.
All product designations used may be trademarks of SENNEBOGEN Maschinenfabrik GmbH or other supplying companies, and any use by third parties for their own purposes may violate the rights of the owners.Please contact your local SENNEBOGEN sales partner for information concerning the equipment variants offered. Requested performance characteristics are only binding if they are expressly stipulated upon conclusion of the contract. Delivery options and technical features are subject to change. Errors and omissions excepted. Equipment is subject to change, and rights of advancement are reserved. © SENNEBOGEN Maschinenfabrik GmbH, Straubing, Germany. Reproduction in whole or in part only with written consent of SENNEBOGEN Maschinenfabrik GmbH, Straubing, Germany.
Orde
r no.
299
035
850R
-E-0
4161
0-02
1910
-111
9du-
0820
du
top related