broadway mirror specsheets - newtech · specification sheet broadway 800mm round mirror newtech...
Post on 02-Aug-2021
3 Views
Preview:
TRANSCRIPT
SPECIFICATION SHEET
Broadway 800mm Round MirrorNewtech Code: 8877
Features
Technical Details
Head Office: 281 Heads Road, WanganuiAuckland Office: 525 Great South Road, Penrose, Auckland06 349 0194 | 0800 728 662www.newtech.co.nz
● LED lighting with Soft-Touch Sensor Switch
● Demister
● Dimensions: H800 x W800 x D30
LED Watts: 16.5W
● LED Modules: 282 LED Modules
● Equivalent to: 17W/Incandescent Lumens:1250
0800 728 662 www.newtech.co.nzsales@newtech.co.nz
SPECIFICATION SHEET
700
35
A
600
Broadway 900 Mirror with LED lighting and demister
Product:Size:Code:
Broadway 900 Mirror with LED Lighting & Demister H700 X W900 X D418870
*Disclaimer: Measurements are nominal.@ 2016 Newtech. All rights reserved.
900
6
25 30
700
900
30 25
50
700
900
900
700
20
700
1550
1580
20
35
20
35
35
A
700
900
30 25
50
700
900
900
700
20
700
1550
1580
20
35
20
35
35
800
Broadway 800 Round Mirror with LED LightingSPECIFICATION SHEET
*Disclaimer: Measurements are nominal.® 2018 Newtech.. All rights reserved.
700
35
A
600
Broadway 750 Mirror with LED lighting and demister
Product:Size:Code:
Broadway 750 Mirror with LED Lighting & Demister H700 X W750 X D418865
*Disclaimer: Measurements are nominal.@ 2016 Newtech. All rights reserved.
SPECIFICATION SHEET
0800 728 662 www.newtech.co.nzsales@newtech.co.nz
750
6
25 30
700
750
30 25
50
700
750
750
700
700
1550
1580
20
35
20
35
20
35
700
900
30 25
50
700
900
900
700
20
700
1550
1580
20
35
20
35
35
A
650
Product: Broadway 800 Mirror with LED LightingSize: H800 X W800LED Watts: 16.5WLED Modules: 276 LED Modules Equivalent to: 75W Incandescent Lumens: 1250Code: 8877
Installation procedure
1.Open the carton and make sure all the parts listed below are present
3.Make the electrical connections ensuring first that the electrical supply has been turned off.This mirror is a class 1 product and requires an earth connection. It should be installed inaccordance with the latest IEE regulations.
2.Mark a desired height of the mirror. Drill the required holes and insert the wall plugs.Note: Wall plugs supplied are only suitable for solid stone/brick walls. Please ensurethe screws are fully tight. The mirror can be mounted either portrait or landscape.
Live TerminalConnection
Earth TerminalConnectionOutput Wires
Neutral Terminal Connection
1X
2X
2X
FLOORFROMHEIGHTDESIREDCHOOSE
DISTANCE A BETWEENCENTERS OF BRACKETS
4.Hang the mirror onto the wall.
A5.Press the icon to control on/off the lighting and heating pad.
LED MIRROR INSTALLATION INSTRUCTIONSSAA
425
800
800
Installation procedure
1.Open the carton and make sure all the parts listed below are present
3.Make the electrical connections ensuring first that the electrical supply has been turned off.This mirror is a class 1 product and requires an earth connection. It should be installed inaccordance with the latest IEE regulations.
2.Mark a desired height of the mirror. Drill the required holes and insert the wall plugs.Note: Wall plugs supplied are only suitable for solid stone/brick walls. Please ensurethe screws are fully tight. The mirror can be mounted either portrait or landscape.
Live TerminalConnection
Earth TerminalConnectionOutput Wires
Neutral Terminal Connection
1X
2X
2X
FLOORFROMHEIGHTDESIREDCHOOSE
DISTANCE A BETWEENCENTERS OF BRACKETS
4.Hang the mirror onto the wall.
A5.Press the icon to control on/off the lighting and heating pad.
LED MIRROR INSTALLATION INSTRUCTIONSSAA
425
Installation procedure
1.Open the carton and make sure all the parts listed below are present
3.Make the electrical connections ensuring first that the electrical supply has been turned off.This mirror is a class 1 product and requires an earth connection. It should be installed inaccordance with the latest IEE regulations.
2.Mark a desired height of the mirror. Drill the required holes and insert the wall plugs.Note: Wall plugs supplied are only suitable for solid stone/brick walls. Please ensurethe screws are fully tight. The mirror can be mounted either portrait or landscape.
Live TerminalConnection
Earth TerminalConnectionOutput Wires
Neutral Terminal Connection
1X
2X
2X
FLOORFROMHEIGHTDESIREDCHOOSE
DISTANCE A BETWEENCENTERS OF BRACKETS
4.Hang the mirror onto the wall.
A5.Press the icon to control on/off the lighting and heating pad.
LED MIRROR INSTALLATION INSTRUCTIONSSAA
DISTANCE BETWEEN CENTRES OF BRACKETS 425MM
CHOOSE DESIRED HEIGHT FROM
FLOOR TO SUIT
0800 728 662 www.newtech.co.nzsales@newtech.co.nz
SPECIFICATION SHEET
700
35
A
600
Broadway 900 Mirror with LED lighting and demister
Product:Size:Code:
Broadway 900 Mirror with LED Lighting & Demister H700 X W900 X D418870
*Disclaimer: Measurements are nominal.@ 2016 Newtech. All rights reserved.
900
6
25 30
700
900
30 25
50
700
900
900
700
20
700
1550
1580
20
35
20
35
35
A
700
900
30 25
50
700
900
900
700
20
700
1550
1580
20
35
20
35
35
800
Broadway 800 Round Mirror with LED LightingSPECIFICATION SHEET
*Disclaimer: Measurements are nominal.® 2018 Newtech.. All rights reserved.
700
35
A
600
Broadway 750 Mirror with LED lighting and demister
Product:Size:Code:
Broadway 750 Mirror with LED Lighting & Demister H700 X W750 X D418865
*Disclaimer: Measurements are nominal.@ 2016 Newtech. All rights reserved.
SPECIFICATION SHEET
0800 728 662 www.newtech.co.nzsales@newtech.co.nz
750
6
25 30
700
750
30 25
50
700
750
750
700
700
1550
1580
20
35
20
35
20
35
700
900
30 25
50
700
900
900
700
20
700
1550
1580
20
35
20
35
35
A
650
Product: Broadway 800 Mirror with LED LightingSize: H800 X W800LED Watts: 16.5WLED Modules: 276 LED Modules Equivalent to: 75W Incandescent Lumens: 1250Code: 8877
Installation procedure
1.Open the carton and make sure all the parts listed below are present
3.Make the electrical connections ensuring first that the electrical supply has been turned off.This mirror is a class 1 product and requires an earth connection. It should be installed inaccordance with the latest IEE regulations.
2.Mark a desired height of the mirror. Drill the required holes and insert the wall plugs.Note: Wall plugs supplied are only suitable for solid stone/brick walls. Please ensurethe screws are fully tight. The mirror can be mounted either portrait or landscape.
Live TerminalConnection
Earth TerminalConnectionOutput Wires
Neutral Terminal Connection
1X
2X
2X
FLOORFROMHEIGHTDESIREDCHOOSE
DISTANCE A BETWEENCENTERS OF BRACKETS
4.Hang the mirror onto the wall.
A5.Press the icon to control on/off the lighting and heating pad.
LED MIRROR INSTALLATION INSTRUCTIONSSAA
425
800
800
Installation procedure
1.Open the carton and make sure all the parts listed below are present
3.Make the electrical connections ensuring first that the electrical supply has been turned off.This mirror is a class 1 product and requires an earth connection. It should be installed inaccordance with the latest IEE regulations.
2.Mark a desired height of the mirror. Drill the required holes and insert the wall plugs.Note: Wall plugs supplied are only suitable for solid stone/brick walls. Please ensurethe screws are fully tight. The mirror can be mounted either portrait or landscape.
Live TerminalConnection
Earth TerminalConnectionOutput Wires
Neutral Terminal Connection
1X
2X
2X
FLOORFROMHEIGHTDESIREDCHOOSE
DISTANCE A BETWEENCENTERS OF BRACKETS
4.Hang the mirror onto the wall.
A5.Press the icon to control on/off the lighting and heating pad.
LED MIRROR INSTALLATION INSTRUCTIONSSAA
425
Installation procedure
1.Open the carton and make sure all the parts listed below are present
3.Make the electrical connections ensuring first that the electrical supply has been turned off.This mirror is a class 1 product and requires an earth connection. It should be installed inaccordance with the latest IEE regulations.
2.Mark a desired height of the mirror. Drill the required holes and insert the wall plugs.Note: Wall plugs supplied are only suitable for solid stone/brick walls. Please ensurethe screws are fully tight. The mirror can be mounted either portrait or landscape.
Live TerminalConnection
Earth TerminalConnectionOutput Wires
Neutral Terminal Connection
1X
2X
2X
FLOORFROMHEIGHTDESIREDCHOOSE
DISTANCE A BETWEENCENTERS OF BRACKETS
4.Hang the mirror onto the wall.
A5.Press the icon to control on/off the lighting and heating pad.
LED MIRROR INSTALLATION INSTRUCTIONSSAA
DISTANCE BETWEEN CENTRES OF BRACKETS 425MM
CHOOSE DESIRED HEIGHT FROM
FLOOR TO SUIT
● 5mm Mirror Glass
● Safety Film Vinyl Backing● Plexi Glass Frame Enclosing LEDs● IP44 Rating
Specification / Compliance
top related