bÜfa -tec sigma 6 evo-line...the bÜfa®-tec sigma 6 evo-line resin and hard-ener pump is a...
Post on 20-May-2020
2 Views
Preview:
TRANSCRIPT
Highest Application Performance
BÜFA® -TEC SIGMA 6 EVO-LINE
Efficient Machine Technology
TECHNICAL INFORMATION:
. Pressure ratio resin: 20:1
. Amount of peroxide: 1 - 3%
. Flow rate per cycle: 220 ml
. Length of hose, e. g.: 10 m
. Output max. water @ 30 cycles 6.6 l/min
. Inlet air pressure max.: 6 bar
. Compressed air consumption: 500-900 l/min
. Innovative pump technology
with self-adjusting packings
. Fast and easy maintenance
of pumps through easy access to packings
. Less pulsation through quick action valve
technology in the air motor
. Different packing systems can be selected
for the same pump
BÜFA® -TEC SIGMA 6 EVO-LINE
The BÜFA®-Tec Sigma 6 EVO-Line resin and hard-
ener pump is a reliable and durable pump unit that
will give you high performance even in the most de-
manding production environments. The systems are
designed for a long, reliable operating life and con-
sist of sectional modules which allow quick overhaul
and easy maintenance. With the appropriate tools,
the Sigma 6 unit can be used as a fibre spray unit
and gelcoat unit.
The new EVO-Line trolley allows uncomplicated ad-
aptation of the unit to meet your special production
requirements.
The following tools and extensions are available for
this:
. Boom for holding the hose package
. ATEX certified flow heater
. Different suction units
(hobbock, drum and IBC)
. Different application tools
. Stroke counter for specified quantity of resin
Get in touch with us if you are interested in further
possibilities for adapting or expanding the unit.
05-19 | Illustrations: BÜFA, Fotolia © Vanessa, Thaut ImagesSubject to change without notification.The information given above is based on our current state of knowledge and experience. In view of the many factors that may influence processing and application of our products, the user is not relieved from carrying out his own tests and trials. No legally binding warranty of certain properties or suitability for a particular purpose can be derived from this information. It is the responsibility of the receiver or user of our products to observe pro-prietary rights as well as existing laws and regulations. The latest version of the EU Safety Data Sheet must also be observed.For further information and Technical Information Sheets, go to buefa.de≠
buefatec.de
Century with cutter
Patented magnetic spool valve for fast, pulsation-free stroke change
Fast air outlet through dump valves
Less loss of force through poppet valves
AIR MOTOR CROSS-SECTION
BÜFA Composite Systems GmbH & Co. KG
Hohe Looge 2-8
26180 Rastede
GERMANY
Phone +49 4402 975-0
Fax +49 4402 975-300
compositesystems@buefa.de
buefa.de
A member of the BÜFA Group
top related