bis-sh-ds | s-wave source

Post on 09-Feb-2017

221 Views

Category:

Documents

0 Downloads

Preview:

Click to see full reader

TRANSCRIPT

Technical Details

Data Examples

e borehole source BIS-SH-DS generates horizontally polarized shear waves (SH) and compressional waves (P). e seismic signals are highly repeatable. e source works in dry or water �lled boreholes and can be used in vertical or horizontal boreholes. Energy released by the IPG800 discharges through a system of coupled coils. ey generate a mechanical impact to the borehole wall that releases seismic waves. e borehole source is coupled to the borehole wall by a pneumatic clamping system (in�atable bladder). e orientation of the source is controlled from surface by a torsionally stiff hose.

Unconsolidated sedimentsBorehole distance: 3 m

Hard rockBorehole distance: 5 m

BIS-SH-DS | S-Wave Source

0 5 10 15 20 25 30 35 40 45 50

11

10

9

8

7

6

5

4

3

2

Time [ms]

Dep

th [m

]

0 5 10 15 20 25 30

28

26

24

22

20

18

Time [ms]

Dep

th [m

]

Generated wave types: SH/PSignal frequencies: Up to 4 kHz(depending on geology and borehole distance)Operational depth: Up to 60 mSource length: 880 mmSource diameter: 65 mmSource weight: 8.5 kgCable weight per metre: 665 gBorehole diameter: 75-100 mm(or larger if spacers are used)Clamping system: In�atable bladderOrientation: Torsionally stiff hoseDepth indicator: Cable marking every 2 mConnector: To impulse generator IPG800Storage: On drum

S-wave source BIS-SH-DS on drum with clamping mechanism (in�atable bladder) and connector to the impulse generator IPG800.

top related