birla - neo chemicalneochemical.ru/file/tehuglerod_ekstruzionnye_i_shinnye...birla carbon 06/12...
Post on 18-Mar-2018
215 Views
Preview:
TRANSCRIPT
IXT1O31A low surface area, high structure, low residue
carbon black that provides superior dispersibility,
processability and excellent surface appearance
for extrusion applications.
Class “A” Profiles
BIRLA CARBON
06/12
XT1O31 has been developed to meet the industry need for highly loaded rubber profile
extrusions with good dispersibility and processability for critical profile extrusions.
XT1O31 is a low surface area, high structure carbon black with optimized morphology
that allows high carbon black loadings and provides excellent dispersion and surface fin
ish.
4-
0C,4-
___________________________ ____________
C.)
C,
C,>4-
C,ix
XTlO3lPerformance Summary for Extrusion Applications
Far East and SE Asia:888/122, 888/128, Mahatun Plaza, 12th
FloorPloenchit Road, Lumpini
Pratumwan, Bangkok 10330Thailand
+66 02 2536745-54
South Asia and Middle East:910/911, Kailash Building
Kasturba Gandhi MargNew Delhi 110 001
IndiaTel: +91 112335 1069 / 71
Benefits
Reduced compound costs
Reduced scrap rates and Class ‘A’ extrusion finish
Good dimensional stability and faster extrusion rates
SALES OFFICES— -
North America:1800 West Oak Commons Court
Marietta, Georgia 30062 U5A1800438 6968
South America:Rua Dr. Cândido Espinheira,
n9 560, 72 andarSào Paulo — SP - 05004-000 - Brasil
+55 11 3598 3800
Europe and Africa:
Columbian Chemicals Europa GmbHPodbielskistraBe 160D-30177 Hannover
Germany+49 511 630 890
Typical Properties of XT1O31
Analytical Property
Nitrogen Surface Area, m2 I g
STSA,m2/g 38
Iodine Number, mg/g
OAN, mL/lOOg 121
COAN, mL/lOOg 80
100.0
75.0
50.0
25.0
0.0
100-150 150-200 200-250 250-500
Defect Size (pm)
Advantages
Higher Oil and Filler Loading
Reduced Defects and Improved Dispersion
Reduced Die Swell
www.birlacarbon.com
r5: ar.d€:.v:
isn thepn:..ct; .: o ng: w:it - -‘:e -- ..ingn --— —eczo. :..‘.Y
Sttets ------
- rc our •SS: In the infrin-’: -
© Bitla Carbon 2012
XT1029A low surface area, high structure, low residuecarbon black that provides superior dispersibility,processability and excellent surface appearancefor extrusion applications.
I
I 0rJ0
I
Class “A” Profiles
ADITYA BIRLA
BIRLA CARBON
0S112
XT1029 has been developed to meet the industry need for highly loaded rubber profileextrusions with good dispersibility and processability in critical profile extrusions.XT1029 is a low surface area, high structure carbon black with optimized morphologythat allows high carbon black loadings with excellent dispersion and surface finish.
N650 XT1029
Carbon Black Loading (phr) 125 150
Oil Loading (phr) 105 115
In-Rubber Properties
Hardness (Shore A) 59 62
Mooney Viscosity 35 39
100% Modulus (MPa) 3.7 4.5
Tensile Strength (MPa) 11.5 10.8
Compression Set (%) 10 9
Surface Appearance
Jetness (lower is blacker) 8.3 8.9
Blueness (lower is bluer) 0.0 -0.1
Gloss0 65 60
Relative Defect Count 100 53
The test recipe was a sulfur cured EPDM extrusion compound with the loadingsshown in the table.
XT1029 Performance Summary for Extrusion Applications
Advantages
Higher Oil and Filler Loading
Reduced Defects and Improved Dispersion
Higher Volume Resistivity
Reduced Die Swell
IFar East and SE Asia:
888/122, 888/128, Mahatun Plaza, 12thFloor
Ploenchit Road, LumpiniPratumwan, Bangkok 10330
Thailand+66 02 2536745-54
SAJ OFFICES
_________
—
North America:1800 West Oak commons Court
Marietta, Georgia 30062 USA1 800 438 6968
South America:Rua Dr. candido Espinheira,
n9 560, 79 andarSão Paulo — SP - 05004-000 - Brash
+55 11 3598 3800
South Asia and Middle East:910/911, Kailash Building
Kasturba Gandhi MargNew Delhi 110 001
IndiaTel: +91 11 2335 1069 / 71
Europe and Africa:Columbian Chemicals Europa GmbH
Podbielskistrale 160D-30177 Hannover
Germany+49 511 630 890
Typical Properties of XT1029
Analytical Property
Nitrogen Surface Area, m2 / g 28
STSA, m2 / g 27
Iodine Number, mg/g 30
CAN, mL/lOOg 130
COAN, mL/lOOg 80
Benefits
Reduced compound costs
Reduced scrap rates and Class ‘A’ extrusion finish
Better electrical isolation of auto body components
Good dimensional stability and faster extrusion rates
-
www.birlacarbon.com
ca:- aea ::nouror ..
;:.sac
. -.
7LPCS ‘-- e—t :th: bI .. ... .:
© Birla Carbon 2012
XT1004A coarse particle size, medium structure, lowresidue carbon black designed to provideexcellent dispersibility and surface finishperformance for low gloss extrusion applications.
Class “A” Profiles
ADITYA BIRLA
BIRLA CARBON
O6I2
.X11004..XT1004 has been designed for highly loaded extrusion compounds with improveddispersibility and processability with good surface appearance. XT1004 is a coarseparticle size, medium structure carbon black that is optimized for excellentdispersion, high carbon black loadings, low gloss and very high electrical resistivity.
Typical Properties of XT1004
Analytical Property
Nitrogen Surface Area, m2 / g 25
STSA,m2/g 25
Iodine Number, mg/g 23
OAN, mL/100g 95
COAN, mL/lOOg 68
N550 XT1004
Carbon Black Loading (phr) 140 170
Oil Loading (phr) 120 110
In-Rubber Properties
Hardness (Shore A) 60 62
Mooney Viscosity 36 39
100% Modulus (MPa) 3.7 4.1
Tensile Strength (MPa) 11.3 9.6
Compression Set (%) 12 11
Volume Resistivity (c2.cm) 27 73
Surface Appearance
Jetness (lower is blacker) 8.2 9.8
Blueness (lower is bluer) -0.1 -0.2
Gloss0 63.6 46.4
*The test recipe was a sulfur cured EPDM extrusion compound with the loadings shown in the table.
XT1004 Performance Summary for Extrusion Applications
Improved Dispersibility
Improved Processing at High Loadings
Very High In-rubber Electrical Resistivity
Compounding Flexibility
IFar East and SE Asia:
888/122, 888/128, Mahatun Plaza, 12thFloor
Ploenchit Road, LumpiniPratumwan, Bangkok 10330
Thailand+66 02 2536745-54
South Asia and Middle East:910/911, Kailash Building
Kasturba Gandhi MargNew Delhi 110 001
IndiaTel: +911123351069/71
SALES OFFICES ‘
__
- -- -
North America:1800 West Oak Commons Court
Marietta, Georgia 30062 USA18004386968
South America:Rua Dr. Cãndido Espinheira,
n 560, 72 andarSão Paulo — SP - 05004-000 - Brasil
+55 11 3598 3800
Europe and Africa:Columbian Chemicals Europa GmbH
Podbielskistrafe 160D-30177 Hannover
Germany+49511630890
Advantages Benefits
Shorter mixing times and less scrap
Lower compound cost and increased extrusion rate
Better isolation of automotive body components
Ability to tailor processability and surface appearance
www.birlacarbon.com
e:1::-.-..-- :s;guarantee of s.:r.rac’ s :—; ld witct -:-c a- iud-g Ii r- ta any V2TY
MC- B_ ESS ;R ;p:;E.-: .-poss e:a:-DD,csare-:to use .
— © Birla Carbon 2012
‘C
00
Hose Applications
XT1004XT1004’s combination of structure and particle sizeallows a compounder to produce highly loaded hosecompounds with reduced compound costs andexcellent processing properties with resistance toelectrochemical degradation (ECD).
ADITYA BIRLA
BIRLA CARBON
06j12
I1Q4XT1004 has been developed for highly loaded extrusion compounds with very low
electrical conductivity. XT1004 is a coarse particle size, medium structure carbon black
that is optimized for excellent dispersion, high carbon black loadings and very high
electrical resistivity.
Typical Properties of XT1004
Physical Properties After Aging in Coolant for 7 days at 80°C, 1OV
Coa,1
Co
0.4-,CDto0w
XT1004 Performance Summary for Automotive Hoses and ECD Resistance
Advantages Benefits
Improved Dispersibility
Improved Processing at High Loadings
Very High In-rubber Electrical Resistivity
Shorter mixing times and less scrap
Lower compound cost and increased extrusion rate
Improved ECD resistance and maintenance of tensile
properties after ageing
Far East and SE Asia:
888/122, 888/128, Mahatun Plaza, 12thFloor
Ploenchit Road, LumpiniPratumwan, Bangkok 10330
Thailand+66 02 2536745-54
S ALE S OFFICES
North America:1800 West Oak Commons court
Marietta, Georgia 30062 USA1 800 438 6968
South America:Rua Dr. cândido Espinheira,
n 560, 7 andarSão Paulo — SP - 05004-000 - Brasil
+55 11 3598 3800
South Asia and Middle East:910/911, Kailash Building
Kasturba Gandhi MargNew Delhi 110001
IndiaTel: +91 112335 1069/71
www.birlacarbon.com Europe and Africa:Columbiari Chemicals Europa GmbH
PodbieIskistrale 160D-30177 Hannover
Germany+49 511 630 890
0.
a,
16
14
12
10
8
6
4
2
0
DUnaged •Aged**600 —
500 —
400 —
300 —
200 —
100 —
0—
N550 XTIOO4 N550 XT1004
—I’ I
f,:an-::--
being son .. cc r mpe -:‘- any WARy,.
M::—A—yL—D/c.n,E ::,: ,nnr,Sn;JSZ
-.con-.: ireinfn’-.rofanya© Birla Carbon 2012
mD
nID
-DID-.‘-hC
p-)3nfl)
ID
Carbon Black forTyre Applications
Enhanced Performance TyreCarbon BlacksTailored Morphology tread carbon blacksthat result in an enhanced balance oftreadwear, rolling resistance, traction andprocessabil ity.
ADITYA_BIRLA
Li,
BIRLA CARBON
—1•1
(Dp-i
n-I
C
arbon Enhanced Performance Tyre Carbon Blacks
The tailored morphology of Birla Carbon’s range of Enhanced Performance
Carbon Blacks give an improved balance between tread wear, traction androlling resistance.The range consists of three grades:
• CD2109• CD2056• CD2123
High abrasion low rolling resistance truck tread applicationsHigh abrasion low rolling resistance truck tread applicationsNon-Tread applications
DIN Abrasion
(Lower Better)
Tan 6 at 60°C
(Lower Better, N234=100)
(J
50
Performance Summary Enhanced Performance Tread Grades
Advantages Benefits
Improved Treadwear (CD2109, CD2056) Reduced tire operational costs
Improved Toughness (CD2123) Crack growth resistanceGreater compound throughputReduced Fuel consumption and lower CO2 em issions
F
The facts a d recummencUtis made iii snis puLlic,un ae based i search er ethers, aid are belie edt. he
acetiats Hewevti no garatee c accracs is made, the products di I eir sld withotI saiiant •pi-sssd r
implied ick.ding hit not limited tL a.y VvAPRANTY 01 MERCHANTABILITi U flTNESS F(F - FAFTICLU F 1PFSF
OP USE Stateme its 00cerning the p ssil le se of our products are —d as rer i mendritions to i t ijur
Products in the iifriigemet ot an patent
CD2056
CD 2109
N234
CD2123 I—I
CD 2056
CD 2109
N234I t
90 95 100 105 0 100
Faster MixingReduced Rolling Resistance
Europe and Africa Sales OfficeColumbian Chemicals Europa GmbHPodbielskistral3e 160D-30177 Han foyerTel: +49 511 63089 0Fax: +49 511 63089 12
www.birlacarbon.comS
IC Birla carbon 2012
top related