bep digital monitoring.pdf
Post on 07-Aug-2018
223 Views
Preview:
TRANSCRIPT
8/21/2019 BEP Digital Monitoring.pdf
http://slidepdf.com/reader/full/bep-digital-monitoringpdf 1/7
Contour
The ser es D g tal Mon tor ng ystem,designed and manu actured by BEP Marine, is made to meet the requirements o modern boating
and recreational vehicles. Electrical installations on-board the modern boat now incorporate complex AC & DC systems along with extensive tankage
for items such as fuel, fresh water, sewage and grey water. Accurate monitoring of such systems is essential, as a mal-function in any one of the above
areas could cause major damage to expensive equipment and ultimately endanger the vessel or peoples lives. The dot matrix display incorporated in
the 600 series allows for more detailed on-screen information and clarity of viewing. The screen has backlighting for easy night time viewing.
d i g i t a l m o n i t o r i n g s y s t e m s
he - M has had new features added for 2006. It offers the ability to have 3 voltage inputs
ith Hi/Low alarms. It can also be configured as a bilge monitor with selectable legends for different
ilge areas. This allows the 600-VM3 to be either fully configured as a voltmeter or partially as
olts or bilge, eg: position 1 volt meter, position 2 & 3 bilge monitor. Selectable legends allow full
n ormation to be shown on the screen to avoid con usion, unlike other digital meters available which
nly show con using digits. L D screen draws 7 less than equivalent LED screens.
pec cat ons:• input voltage 10-35 VDC
• power consumption 45 ma
• power consumption 5 ma (back lighting on
• imensions refer a ove
he -T o ers economical
onitoring for fresh or grey water
nks (plastic or fibreglass only). Using
00-TGSK strategically mounted well
uts will give 4 tank levels. Supplied
ith one sen er kit. econ sen er
r ere separatey.
lso available is the RV-TS Tank
ender. Only one hole is required for
sta at on, the sen er s sea e v a
external lock nuts. Only suits tanks
with maximum depth of 280mm.
Selectable Legends:
Voltmeter Bilge monitor aux batt bilge aftstart batt
genset bilge midhouse batt
radio batt bilge fwdport start
winch bilge stbdstbd start
bowthrust bilge porthouse 1
van bat bilge monhouse 2
8/21/2019 BEP Digital Monitoring.pdf
http://slidepdf.com/reader/full/bep-digital-monitoringpdf 2/7
Systems in Operation Monitors & Panels
eatures:
• 1 mm red LED’s giving important systems on in ormation
• Ideal for flybridge or remote dash position. Also available with alarm and mute switch.
• Backlit labels
The - M o ers the ollow ng eatures:
• Programmable legends for functions being monitored eg, forward bilge
pump, aft bilge pump, engine room lights, salt water pump, locker lights, etc.
• Selectable alarm functions with mute capability, eg.
1. Short beep for indicating an engine room light
has been switched on, recurring every 30 minutes if light is left on
2. Continuing alarm for pump operation which can be muted by alarm mute switch
• Visual indication as well as audible alarm on screen to indicate unction
n operation. I more than one unction is alarming this will alternate on
ashing screen.
• Provision for external alarm
• Power supply 10-35VDC
• Display is backlit or easy night time viewing
SOP PANELS
PART No.SIZE mm
H x W x DLABEL SHEET LEDʼ ALARM MUTE SW
SOP1 115x127x40 SET 1 4 NO NO
SOP1-AL 15x127x40 SET 1 3+1 switch YES YES
SOP2 115x239x40 SET 1&2 NO NO
SOP2-AL 15x239x40 SET 1&2 +1 switch YES YES
SIZE inches
H x W x D
4.5x5x1.6
4.5x5x1.6
4.5x9x1.6
4.5x9x1.6
8/21/2019 BEP Digital Monitoring.pdf
http://slidepdf.com/reader/full/bep-digital-monitoringpdf 3/7
Contour d c m o n i t o r
• Percentage rema n ng n amp hours. (on house bank only).
• Software utilizes Peukerts exponent
• uitable or use on battery banks rom
- Amp hours
• Low Amp hour alarm (for remote alarm
operation use part no. 54-27C4)
• Capacity remaining in amp hours
and percentage
The bilge monitor function monitors
bilge pump functions 24 hours,
7 days a week. tores bilge pump
operatons an accumu ate t me.
Resetable when leaving boat
Function only available when third
voltmeter position is not used.
CONTOUR MATRIX CABLE KITS
• Voltage Monitor
• Voltage monitoring for up to 3 battery banks
• 12 custom selectable legends as per
600-VM3 (refer page 18 .
• Hi /Low voltage alarms on all 3 banks
• Amps charge d scharge
(on house bank only).
• Meter supplied with a 450-50mv shunt
• .1 amp resolution up to 4 amps
Specifications:
• input voltage 10-35 VDC
• power consumption 45 mA
• power consumption 65 ma (back lighting on)
• dimensions refer page 18.
The Fuel Gauge
For Your Batteries
A c cura e
he -D M monitor offers a comprehensive range of functions to allow full monitoring of your
batteries and charging systems. The 600-DCM monitors voltage on up to 3 battery banks, Amps for
charge and discharge and capacity remaining in amphours / percentage utilising peukerts exponent
(house bank only) with the added function of a bilge monitor allowing 24 hour monitoring of your
bilge pump. This meter is an important addition to modern battery management systems. electable
egends allow ull in ormation to be shown on the screen to avoid con usion, unlike other digital metersvailable, which only show con using digits. L D screen draws 7 less than equivalent LED screens.
8/21/2019 BEP Digital Monitoring.pdf
http://slidepdf.com/reader/full/bep-digital-monitoringpdf 4/7
Contour a c m o n i t o r
Frequency Function
• -1 Hz
• requency a arm
selectable or 5 or Hz
Amp Functions
• 2 AC amps inputs
• Selectable legends AC amps,
AC amps line 1 & AC amps line 2
• g amps a arm
A Volts Funct ons
• inputs with selectable legends –
A volts Line 1, A volts Line , A
volts L1 + L2, AC volts panel & AC
volts transfer
• High low volts alarms
mens ons:
x x 5 h mm
.75 x .75 x h inches
e - ncu es vo age rans ormers or
up to 3 voltage inputs. Supplied with 600-ACM.
CT-10-3
-VSEN
he -A M monitor offers full comprehensive monitoring for your AC system from
standard single line inputs to twin line systems as used in the USA (no need for additional
selector switch or A inputs . The -A M is supplied with an A transducer, Part No:
-V EN and current trans ormer Part No: T-1 - detailed below. A larger T, Part No:
T-HD, is also available where cables are too large to pass through the standard T.
Diagrams below show basic installation. Selectable legends allow full information to beshown on the screen to avoid confusion, unlike other digital meters available, which only
show confusing digits. LCD screen draws 70% less than equivalent LED screens.
(NEW) AC Volts
expan e screen
• hows all voltage inputs on one
Dimensions:
. W x .2 H x 1 . Dm
1.5” W x 1.55” H x .55” D
hole size: 1 mm ( .5”
ne T-1 - current transformer is supplied with600-ACM. If a twin line system is in use, a second
CT must be ordered
D mens ons:
7mm Dia x 10.5 mm
(1.85” Dia x .4” Depth)
hole size: 32mm (1.25”)
CT-HD is available fo
systems w t arge
ma ns ca es,
too large or T-1 - .
ordered separately0.
Specifications:
• input voltage 1 - 5 VD
• power consumption 45 mA
• power consumption 65 mA (back lighting on)
• or remote alarm operation use part
no. 4-2 4
• dimensions refer page 18
8/21/2019 BEP Digital Monitoring.pdf
http://slidepdf.com/reader/full/bep-digital-monitoringpdf 5/7
Ultrasonic Tank Sender t a n k l e v e l m o n i t o r i n g
Tank sender interface module
s on y require when using VD
10-180 ohm or Teleflex (240-33 ohm
senders to produce a 0-5 Volt signal to
operate 600-TLM. Switchable link for VDO
or Teleflex signal. 10 – 32 V supply. One unit
per sender required.
See wiring application.
TLM Features:
• Tank level monitoring for up to 3 tanks
• 14 selectable legends for tank
descriptions eg. Fuel, Water, Blackwater
• Hi - Low tank level alarms for 3 tanks
• ank eve s spaye n grap c or
percentage ormat
• n ts spaye n tres, mpera
gallons or U gallons
• Audible alarm with mute function
• Power supply 1 - 5VD
• Display is backlit for easy night
time viewing
FUEL AND WATER TANK SENDERS
Part No. ank Depth(probe Adjust Range)
Fuel Water Moun ti ng
TSTMF-15-30 N 150-300 YES NO TOP
TSTMF-30-60 N 300-600 YES NO TOP
TSTMF-60-100 N 600-1000 YES NO TOP
TSSMF-15-30 N 150-300 YES NO SIDE
TSSMF-30-60 N 300-600 YES NO SIDE
TSSMF-60-100 N 600-1000 YES NO SIDE
TSTMW-15-30 N 150-300 NO YES TOPTSTMW-30-60 N 300-600 NO YES TOP
TSTMW-60-100 N 600-1000 NO YES TOP
TSSMW-15-30 N 150-300 NO YES SIDE
TSSMW-30-60 N 300-600 NO YES SIDE
TSSMW-60-100N 600-1000 NO YES SIDE
more info to come
8/21/2019 BEP Digital Monitoring.pdf
http://slidepdf.com/reader/full/bep-digital-monitoringpdf 6/7
Ultrasonic Tank Sender t a n k l e v e l m o n i t o r i n g
SPECIFICATIONS
Current draw 25mA with 5 volt gauge output
Tank depth 0 to 2000mm
Mounting SAE 5 stud mounting pattern with gasket, seal and screws
Chemical resistance Petrol, diesel, water, toilet, chemicals
BEP Marines proprietary software allows distributors or volume users to
pre-programme tank imensions giving accurate measurement avoi ing experimental
tank filling.
oftware and Programming Kit available art . T I-P
new TSI Ultrasonic Tank Sender can be used on fuel (petrol or diesel), fresh water, grey water or black
s. This means less KU’s to stock.
• The T I is programmable or the ollowing outputs, 4 - ohm, 1 -1 ohm and -5volt.
• The TSI offers low profile and standard SAE 5 hole mounting pattern, allowing it to be retrofitted to practically all other sender brands.• The T I can be programmed or tank dimensions via a computer utalizing BEP Marine’s propietary T I so tware, avoiding experimental
tank filling on site.
• The TSI configured to a 0-5v output will connect straight into the BEP 600-TLM digital tank monitor.
• When configured to a 240-33ohm or 10-180ohm output the TSI can be connected to teleflex, faria, VDO and many other popular
instrument brands.
0.5M
95.43 [3 3/4"]
1 9 . 6
4
[ 3 / 4 " ]
95.27 [3 3/4"]
8 4 . 8
8
[ 3
5 / 1 6 " ]
8/21/2019 BEP Digital Monitoring.pdf
http://slidepdf.com/reader/full/bep-digital-monitoringpdf 7/7
m u l t i f u n c t i o n d i g i t a l m o n i t o r sContour
Moreinformation
ONE SCREEN!
e - D TLM is designed or installations where space is not available to t two meters.
ering most o the same unctions and settings as the -D M and -TLM.
t offers a compact and economical installation. A full range of selectable legends for battery
anks and tanks is available in the set-up menu. electable legends allow full information to be
shown on the screen to avoid confusion, unlike other digital meters available, which only show
confusing digits. CD screen draws 70% less than equivalent LED screens.
The -D A is designed for installations where space is not available for two meters.
This meter o ers most o the same eatures and settings as the -D M and -A M
with the exception that the A monitor will only receive voltage and 1 current input.
he 600-DCTLM is supplied with
B-450-50mv shunt (refer page 20 .
For tank sender info (refer page 22-23).
Specifications:
• input voltage 10-35 VD
• power consumption 45 mA
• power consumption 65 mA (back lighting on)
• for remote alarm operation use part
no. 54- 7 4
• dimensions refer page 18
The 600-DCACM is supplied
with LB-450-50mv and AC-VSEN
(re er page - 1 .
Compatable with new TS1
Ultrasonic Tank ender
(re er page
top related