belle title groupdep.wv.gov/daq/permitting/titlevpermits/documents/april...emissions trading and...
Post on 10-May-2020
2 Views
Preview:
TRANSCRIPT
Chemours Belle Plant
REDACTED
Title V Permit
R30‐03900001
Group 5 of 5
Renewal Application
4/20/2016
REDACTED COPY CLAIM OF CONFIDENTIALITY
DuPont Belle Plant Title V Permit Renewal Application
Group 5 of 5
Table of Contents – Redacted Application
1. Title V Permit Application General Forms 2. Attachment A – Area Map 3. Attachment B – Plot Plans 4. Attachment C – Process Flow Diagrams 5. Attachment D – Equipment Tables 6. Attachment E – Emission Unit Forms 7. Attachment F – N/A 8. Attachment G – Air Pollution Control Device Forms 9. Attachment H – N/A 10. Confidential Information Forms
REDACTED COPY CLAIM OF CONFIDENTIALITY
General Application Forms (general_forms.wpd)
Page 1 of 17 Revised – 05/08/07
Page _1____ of __17___
WEST VIRGINIA DEPARTMENT OF ENVIRONMENTAL PROTECTION
DIVISION OF AIR QUALITY
601 57th Street SE
Charleston, WV 25304
Phone: (304) 926-0475
www.wvdep.org/daq
TITLE V PERMIT APPLICATION - GENERAL FORMS
Section 1: General Information
1. Name of Applicant (As registered with the WV Secretary of State’s Office):
The Chemours Company FC, LLC
2. Facility Name or Location:
Chemours Belle Plant
Belle, WV
3. DAQ Plant ID No.:
0 3 9 — 0 0 0 0 1
4. Federal Employer ID No. (FEIN):
9 1 1 0 7 7 7 7 3
5. Permit Application Type:
Initial Permit When did operations commence? Before 1970
Permit Renewal What is the expiration date of the existing permit? 11/15/2016
Update to Initial Permit Application
6. Type of Business Entity:
Corporation Governmental Agency
Partnership Limited Partnership
7. Is the Applicant the:
Owner Operator Both
If the Applicant is not both the owner and operator, please provide the name and address of the other party.
8. Number of onsite employees:
370
9. Governmental Code:
Privately owned and operated; 0 County government owned and operated; 3
Federally owned and operated; 1 Municipality government owned and operated; 4
State government owned and operated; 2 District government owned and operated; 5
General Application Forms (general_forms.wpd)
Page 2 of 17 Revised – 05/08/07
Page _2____ of __17___
10. Business Confidentiality Claims
Does this application include confidential information (per 45CSR31)? Yes No
If yes, identify each segment of information on each page that is submitted as confidential, and provide justification for each segment claimed confidential, including the criteria under 45CSR§31-4.1, and in accordance with the DAQ's "PRECAUTIONARY NOTICE-CLAIMS OF CONFIDENTIALITY" guidance.
General Application Forms (general_forms.wpd)
Page 3 of 17 Revised – 05/08/07
Page _3____ of __17___
11. Mailing Address
Street or P.O. Box: 901 West DuPont Avenue
City: Belle
State: WV
Zip: 25015-
Telephone Number: (304) 357-1000
Fax Number: (304) 357-1640
12. Facility Location
Street: 901 West DuPont Avenue
City: Belle
County: Kanawha
UTM Easting: 451.90 km UTM Northing: 4232.60 km Zone: 17 or 18
Directions: I-64 to Belle exit, Rt. 60 east to Belle exit, turn right, plant on left
Portable Source? Yes No
Is facility located within a nonattainment area? Yes No
If yes, for what air pollutants?
Is facility located within 50 miles of another state? Yes No
If yes, name the affected state(s).
Is facility located within 100 km of a Class I Area1? Yes No
If no, do emissions impact a Class I Area1? Yes No
If yes, name the area(s).
1 Class I areas include Dolly Sods and Otter Creek Wilderness Areas in West Virginia, and Shenandoah National Park and James River Face Wilderness Area in Virginia.
General Application Forms (general_forms.wpd)
Page 4 of 17 Revised – 05/08/07
Page _4____ of __17___
13. Contact Information
Responsible Official: Timothy L. Byrd Title: Plant Manager
Street or P.O. Box: 901 West DuPont Avenue
City: Belle
State: WV
Zip: 25015-
Telephone Number: (304) 357-1000
Fax Number: (304) 357-1640
E-mail address: Timothy.L.Byrd-1@chemours.com
Environmental Contact: LeAnne Wheeler
Title: Site Environmental Coordinator
Street or P.O. Box: 901 West DuPont Avenue
City: Belle
State: WV
Zip: 25015-
Telephone Number: (304) 357-1171
Fax Number: (304) 357-1625
E-mail address: leanne.schottle.wheeler@chemours.com
Application Preparer: Jillian Harris
Title: Environmental Consultant
Company: Chemours
Street or P.O. Box: 901 West DuPont Avenue
City: Belle
State: WV Zip: 25015-
Telephone Number: (304) 357-1498
Fax Number: (304) 357-1625
E-mail address: jillian.nicole.harris@chemours.com
General Application Forms (general_forms.wpd)
Page 5 of 17 Revised – 05/08/07
Page _5____ of __17___
14. Facility Description
List all processes, products, NAICS and SIC codes for normal operation, in order of priority. Also list any process, products, NAICS and SIC codes associated with any alternative operating scenarios if different from those listed for normal operation.
Process Products NAICS SIC
Acrylics Plastic Monomers 325211 2821
Chemical Glycolic Acid, VAZO, Methylamines, organic chemical intermediates
325199 2869
Provide a general description of operations.
See Attachment C – Process Flow Diagrams.
15. Provide an Area Map showing plant location as ATTACHMENT A.
16. Provide a Plot Plan(s), e.g. scaled map(s) and/or sketch(es) showing the location of the property on which the stationary source(s) is located as ATTACHMENT B. For instructions, refer to “Plot Plan - Guidelines.”
17. Provide a detailed Process Flow Diagram(s) showing each process or emissions unit as ATTACHMENT C. Process Flow Diagrams should show all emission units, control equipment, emission points, and their relationships.
General Application Forms (general_forms.wpd)
Page 6 of 17 Revised – 05/08/07
Page _6____ of __17___
Section 2: Applicable Requirements
18. Applicable Requirements Summary
Instructions: Mark all applicable requirements.
SIP FIP
Minor source NSR (45CSR13) PSD (45CSR14)
NESHAP (45CSR15) Nonattainment NSR (45CSR19)
Section 111 NSPS Section 112(d) MACT standards
Section 112(g) Case-by-case MACT 112(r) RMP
Section 112(i) Early reduction of HAP Consumer/commercial prod. reqts., section 183(e)
Section 129 Standards/Reqts. Stratospheric ozone (Title VI)
Tank vessel reqt., section 183(f) Emissions cap 45CSR§30-2.6.1
NAAQS, increments or visibility (temp. sources) 45CSR27 State enforceable only rule
45CSR4 State enforceable only rule Acid Rain (Title IV, 45CSR33)
Emissions Trading and Banking (45CSR28) Compliance Assurance Monitoring (40CFR64)
NOx Budget Trading Program Non-EGUs (45CSR1) NOx Budget Trading Program EGUs (45CSR26)
19. Non Applicability Determinations
List all requirements which the source has determined not applicable and for which a permit shield is requested. The listing shall also include the rule citation and the reason why the shield applies.
Permit Shield
General Application Forms (general_forms.wpd)
Page 7 of 17 Revised – 05/08/07
Page _7____ of __17___
19. Non Applicability Determinations (Continued) - Attach additional pages as necessary.
List all requirements which the source has determined not applicable and for which a permit shield is requested. The listing shall also include the rule citation and the reason why the shield applies.
Permit Shield
General Application Forms (general_forms.wpd)
Page 8 of 17 Revised – 05/08/07
Page _8____ of __17___
20. Facility-Wide Applicable Requirements
List all facility-wide applicable requirements. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements).
All Facility-wide requirements in existing permit are still applicable.
Permit Shield
For all facility-wide applicable requirements listed above, provide monitoring/testing / recordkeeping / reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number and/or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See existing permit R30-03900001
Are you in compliance with all facility-wide applicable requirements? Yes No
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
General Application Forms (general_forms.wpd)
Page 9 of 17 Revised – 05/08/07
Page _9____ of __17___
20. Facility-Wide Applicable Requirements (Continued) - Attach additional pages as necessary.
List all facility-wide applicable requirements. For each applicable requirement, include the rule citation and/or permit with the condition number.
See existing permit R30-03900001
Permit Shield
For all facility-wide applicable requirements listed above, provide monitoring/testing/recordkeeping/ reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number and/or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See existing permit R30-03900001
Are you in compliance with all facility-wide applicable requirements? Yes No
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
General Application Forms (general_forms.wpd)
Page 10 of 17 Revised – 05/08/07
Page _10____ of __17___
21. Active Permits/Consent Orders
Permit or Consent Order Number Date of Issuance
MM/DD/YYYY
List any Permit Determinations
that Affect the Permit (if any)
R13-914B 10/31/2008
R13-2284A 01/26/2006
/ /
/ /
/ /
/ /
/ /
/ /
/ /
/ /
/ /
/ /
/ /
/ /
/ /
/ /
/ /
/ /
/ /
/ /
/ /
/ /
/ /
/ /
/ /
General Application Forms (general_forms.wpd)
Page 11 of 17 Revised – 05/08/07
Page _11____ of __17___
22. Inactive Permits/Obsolete Permit Conditions
Permit Number Date of Issuance Permit Condition Number
/ /
/ /
/ /
/ /
/ /
/ /
/ /
/ /
/ /
/ /
/ /
/ /
/ /
/ /
/ /
/ /
/ /
/ /
/ /
/ /
/ /
/ /
/ /
/ /
General Application Forms (general_forms.wpd)
Page 12 of 17 Revised – 05/08/07
Page _12____ of __17___
Section 3: Facility-Wide Emissions
23. Facility-Wide Emissions Summary [Tons per Year]
Criteria Pollutants Potential Emissions
Carbon Monoxide (CO) 650
Nitrogen Oxides (NOX) 5
Lead (Pb)
Particulate Matter (PM2.5)1
Particulate Matter (PM10)1
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC) 1300
Hazardous Air Pollutants2 Potential Emissions
Methanol 800
N, N-Dimethylforamide 8
Dimethylsulfate 1
Regulated Pollutants other than Criteria and HAP Potential Emissions
NH3 1
1PM2.5 and PM10 are components of TSP. 2For HAPs that are also considered PM or VOCs, emissions should be included in both the HAPs section and
the Criteria Pollutants section.
General Application Forms (general_forms.wpd)
Page 13 of 17 Revised – 05/08/07
Page _13____ of __17___
Section 4: Insignificant Activities 24. Insignificant Activities (Check all that apply)
1. Air compressors and pneumatically operated equipment, including hand tools.
2. Air contaminant detectors or recorders, combustion controllers or shutoffs.
3. Any consumer product used in the same manner as in normal consumer use, provided the use results in a duration and frequency of exposure which are not greater than those experienced by consumer, and which may include, but not be limited to, personal use items; janitorial cleaning supplies, office supplies and supplies to maintain copying equipment.
4. Bathroom/toilet vent emissions.
5. Batteries and battery charging stations, except at battery manufacturing plants.
6. Bench-scale laboratory equipment used for physical or chemical analysis, but not lab fume hoods or vents. Many lab fume hoods or vents might qualify for treatment as insignificant (depending on the applicable SIP) or be grouped together for purposes of description.
7. Blacksmith forges.
8. Boiler water treatment operations, not including cooling towers.
9. Brazing, soldering or welding equipment used as an auxiliary to the principal equipment at the source.
10. CO2 lasers, used only on metals and other materials which do not emit HAP in the process.
11. Combustion emissions from propulsion of mobile sources, except for vessel emissions from Outer Continental Shelf sources.
12. Combustion units designed and used exclusively for comfort heating that use liquid petroleum gas or natural gas as fuel.
13. Comfort air conditioning or ventilation systems not used to remove air contaminants generated by or released from specific units of equipment.
14. Demineralized water tanks and demineralizer vents.
15. Drop hammers or hydraulic presses for forging or metalworking.
16. Electric or steam-heated drying ovens and autoclaves, but not the emissions from the articles or substances being processed in the ovens or autoclaves or the boilers delivering the steam.
17. Emergency (backup) electrical generators at residential locations.
18. Emergency road flares.
19. Emission units which do not have any applicable requirements and which emit criteria pollutants (CO, NOx, SO2, VOC and PM) into the atmosphere at a rate of less than 1 pound per hour and less than 10,000 pounds per year aggregate total for each criteria pollutant from all emission units. Please specify all emission units for which this exemption applies along with the quantity of criteria pollutants emitted on an hourly and annual basis:
General Application Forms (general_forms.wpd)
Page 14 of 17 Revised – 05/08/07
Page _14____ of __17___
24. Insignificant Activities (Check all that apply)
20. Emission units which do not have any applicable requirements and which emit hazardous air pollutants into the atmosphere at a rate of less than 0.1 pounds per hour and less than 1,000 pounds per year aggregate total for all HAPs from all emission sources. This limitation cannot be used for any source which emits dioxin/furans nor for toxic air pollutants as per 45CSR27. Please specify all emission units for which this exemption applies along with the quantity of hazardous air pollutants emitted on an hourly and annual basis:
21. Environmental chambers not using hazardous air pollutant (HAP) gases.
22. Equipment on the premises of industrial and manufacturing operations used solely for the purpose of preparing food for human consumption.
23. Equipment used exclusively to slaughter animals, but not including other equipment at slaughterhouses, such as rendering cookers, boilers, heating plants, incinerators, and electrical power generating equipment.
24. Equipment used for quality control/assurance or inspection purposes, including sampling equipment used to withdraw materials for analysis.
25. Equipment used for surface coating, painting, dipping or spray operations, except those that will emit VOC or HAP.
26. Fire suppression systems.
27. Firefighting equipment and the equipment used to train firefighters.
28. Flares used solely to indicate danger to the public.
29. Fugitive emission related to movement of passenger vehicle provided the emissions are not counted for applicability purposes and any required fugitive dust control plan or its equivalent is submitted.
30. Hand-held applicator equipment for hot melt adhesives with no VOC in the adhesive formulation.
31. Hand-held equipment for buffing, polishing, cutting, drilling, sawing, grinding, turning or machining wood, metal or plastic.
32. Humidity chambers.
33. Hydraulic and hydrostatic testing equipment.
34. Indoor or outdoor kerosene heaters.
35. Internal combustion engines used for landscaping purposes.
36. Laser trimmers using dust collection to prevent fugitive emissions.
37. Laundry activities, except for dry-cleaning and steam boilers.
38. Natural gas pressure regulator vents, excluding venting at oil and gas production facilities.
39. Oxygen scavenging (de-aeration) of water.
40. Ozone generators.
41. Plant maintenance and upkeep activities (e.g., grounds-keeping, general repairs, cleaning, painting, welding, plumbing, re-tarring roofs, installing insulation, and paving parking lots) provided these activities are not conducted as part of a manufacturing process, are not related to the source’s primary business activity, and not otherwise triggering a permit modification. (Cleaning and painting activities qualify if they are not subject to VOC or HAP control requirements. Asphalt batch plant
General Application Forms (general_forms.wpd)
Page 15 of 17 Revised – 05/08/07
Page _15____ of __17___
24. Insignificant Activities (Check all that apply)
owners/operators must still get a permit if otherwise requested.)
42. Portable electrical generators that can be moved by hand from one location to another. “Moved by Hand” means that it can be moved without the assistance of any motorized or non-motorized vehicle, conveyance, or device.
43. Process water filtration systems and demineralizers.
44. Repair or maintenance shop activities not related to the source’s primary business activity, not including emissions from surface coating or de-greasing (solvent metal cleaning) activities, and not otherwise triggering a permit modification.
45. Repairs or maintenance where no structural repairs are made and where no new air pollutant emitting facilities are installed or modified.
46. Routing calibration and maintenance of laboratory equipment or other analytical instruments.
47. Salt baths using nonvolatile salts that do not result in emissions of any regulated air pollutants. Shock chambers.
48. Shock chambers.
49. Solar simulators.
50. Space heaters operating by direct heat transfer.
51. Steam cleaning operations.
52. Steam leaks.
53. Steam sterilizers.
54. Steam vents and safety relief valves.
55. Storage tanks, reservoirs, and pumping and handling equipment of any size containing soaps, vegetable oil, grease, animal fat, and nonvolatile aqueous salt solutions, provided appropriate lids and covers are utilized.
56. Storage tanks, vessels, and containers holding or storing liquid substances that will not emit any VOC or HAP. Exemptions for storage tanks containing petroleum liquids or other volatile organic liquids should be based on size limits such as storage tank capacity and vapor pressure of liquids stored and are not appropriate for this list.
57. Such other sources or activities as the Director may determine.
58. Tobacco smoking rooms and areas.
59. Vents from continuous emissions monitors and other analyzers.
General Application Forms (general_forms.wpd)
Page 16 of 17 Revised – 05/08/07
Page _16____ of __17___
Section 5: Emission Units, Control Devices, and Emission Points
25. Equipment Table
Fill out the Title V Equipment Table and provide it as ATTACHMENT D.
26. Emission Units
For each emission unit listed in the Title V Equipment Table, fill out and provide an Emission Unit Form as ATTACHMENT E.
For each emission unit not in compliance with an applicable requirement, fill out a Schedule of Compliance Form as ATTACHMENT F.
27. Control Devices
For each control device listed in the Title V Equipment Table, fill out and provide an Air Pollution Control Device Form as ATTACHMENT G.
For any control device that is required on an emission unit in order to meet a standard or limitation for which the potential pre-control device emissions of an applicable regulated air pollutant is greater than or equal to the Title V Major Source Threshold Level, refer to the Compliance Assurance Monitoring (CAM) Form(s) for CAM applicability. Fill out and provide these forms, if applicable, for each Pollutant Specific Emission Unit (PSEU) as ATTACHMENT H.
ATTACHMENT A
REDACTED COPY CLAIM OF CONFIDENTIALITY
REDACTED COPY CLAIM OF CONFIDENTIALITY
ATTACHMENT B
REDACTED COPY CLAIM OF CONFIDENTIALITY
ATTACHMENT C
REDACTED COPY CLAIM OF CONFIDENTIALITY
DIMETHYLACETAMIDE (DMAc) PROCESS
REDACTED COPY CLAIM OF CONFIDENTIALITY
DMAC PROCESS OVERVIEW
REDACTED COPY CLAIM OF CONFIDENTIALITY
DIMETHYLETHER PROCESS -- DUPONT
REDACTED COPY CLAIM OF CONFIDENTIALITY
DMEPROCESS
REDACTED COPY CLAIM OF CONFIDENTIALITY
DMSPROCESS
REDACTED COPY CLAIM OF CONFIDENTIALITY
DMS FLARE SYSTEM
REDACTED COPY CLAIM OF CONFIDENTIALITY
DuPont Belle Plant Process Flow Diagram - Carbon Monoxide Flare Stack
REDACTED COPY CLAIM OF CONFIDENTIALITY
REDACTED COPY CLAIM OF CONFIDENTIALITY
Process Diagram - Anhydrous NH3
REDACTED COPY CLAIM OF CONFIDENTIALITY
AMINES SYNTHESIS
REDACTED COPY CLAIM OF CONFIDENTIALITY
AMINES REFINING
REDACTED COPY CLAIM OF CONFIDENTIALITY
AMINES REFINING
REDACTED COPY CLAIM OF CONFIDENTIALITY
AMINES REFINING
REDACTED COPY CLAIM OF CONFIDENTIALITY
AMINES VENT SYSTEM
REDACTED COPY CLAIM OF CONFIDENTIALITY
SIMMON'S CREEK TANK FARM
REDACTED COPY CLAIM OF CONFIDENTIALITY
DMF AND MMF PROCESSES
REDACTED COPY CLAIM OF CONFIDENTIALITY
DMF/MMF SYNTHESlS
REDACTED COPY CLAIM OF CONFIDENTIALITY
MMF / DMF SYNTHESlS
REDACTED COPY CLAIM OF CONFIDENTIALITY
DlVIF STORAGE AND LOADING
REDACTED COPY CLAIM OF CONFIDENTIALITY
Chemours BELLE PLANT
NH3 Process Description 1 of 2 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
BLOCK FLOW DIAGRAM
REDACTED COPY CLAIM OF CONFIDENTIALITY
DUPONT BELLE PLANT
NH3 Process Description 2 of 2 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
PROCESS DESCRIPTION
REDACTED COPY CLAIM OF CONFIDENTIALITY
DuPont Belle Plant 1 of 2
METHYLAMINES PROCESS DESCRIPTION
•
Raw Material Unloading & Storage
Synthesis
Refining
Product Storage
Product Loading
REDACTED COPY CLAIM OF CONFIDENTIALITY
DuPont Belle Plant 2 of 2
Methylamines Wastewater Stripper System
Vent and Flare System
REDACTED COPY CLAIM OF CONFIDENTIALITY
DUPONT BELLE PLANT
DMAc Process Overview 1 of 9 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
1.1 Overview
REDACTED COPY CLAIM OF CONFIDENTIALITY
DUPONT BELLE PLANT
DMAc Process Overview 2 of 9 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
1.1 Overview (Continued)
1.2 Reactor Operation
REDACTED COPY CLAIM OF CONFIDENTIALITY
DUPONT BELLE PLANT
DMAc Process Overview 3 of 9 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
1.2 Reactor Operation (Continued)
REDACTED COPY CLAIM OF CONFIDENTIALITY
DUPONT BELLE PLANT
DMAc Process Overview 4 of 9 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
1.2 Reactor Operation (Continued)
REDACTED COPY CLAIM OF CONFIDENTIALITY
DUPONT BELLE PLANT
DMAc Process Overview 5 of 9 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
1.2 Reactor Operation (Continued)
1.3 Column Operation
REDACTED COPY CLAIM OF CONFIDENTIALITY
DUPONT BELLE PLANT
DMAc Process Overview 6 of 9 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
1.3 Column Operation (Continued)
REDACTED COPY CLAIM OF CONFIDENTIALITY
DUPONT BELLE PLANT
DMAc Process Overview 7 of 9 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
1.4 Storage Facilities
1.4.1 DMA Storage Tank
1.4.2 Acetic Acid Tanks
1.4.3 DMAC Storage Tanks
REDACTED COPY CLAIM OF CONFIDENTIALITY
DUPONT BELLE PLANT
DMAc Process Overview 8 of 9 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
1.4 Storage Facilities (Continued)
1.4.3 DMAC Storage Tanks (Continued)
1.5 Maximum Inventory Levels
REDACTED COPY CLAIM OF CONFIDENTIALITY
DUPONT BELLE PLANT
DMAc Process Overview 9 of 9 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
1.5 Maximum Inventory Levels (Continued)
1.5.1 DMA (Dimethylamine) (Continued)
1.5.2 Acetic Acid
1.5.3 Dimethylacetamide (DMAc)
REDACTED COPY CLAIM OF CONFIDENTIALITY
DUPONT BELLE PLANT DMF Process Description 1 of 9 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
1.1 OVERVIEW
REDACTED COPY CLAIM OF CONFIDENTIALITY
DUPONT BELLE PLANT DMF Process Description 2 of 9 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
1.2 SYNTHESIS OPERATION
1.2.1 Reaction
REDACTED COPY CLAIM OF CONFIDENTIALITY
DUPONT BELLE PLANT DMF Process Description 3 of 9 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
1.2 SYNTHESIS OPERATION (Continued)
1.2.1 Reaction (Continued)
REDACTED COPY CLAIM OF CONFIDENTIALITY
DUPONT BELLE PLANT DMF Process Description 4 of 9 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
1.2 SYNTHESIS OPERATION (Continued)
1.2.2 Evaporation & Filtration
REDACTED COPY CLAIM OF CONFIDENTIALITY
DUPONT BELLE PLANT DMF Process Description 5 of 9 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
1.2 SYNTHESIS OPERATION (Continued)
1.2.2 Evaporation & Filtration (Continued)
1.3 REFINING OPERATION
REDACTED COPY CLAIM OF CONFIDENTIALITY
DUPONT BELLE PLANT DMF Process Description 6 of 9 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
1.3 REFINING OPERATION (Continued)
1.4 DMF/METHYLAMINES INTERFACE
REDACTED COPY CLAIM OF CONFIDENTIALITY
DUPONT BELLE PLANT DMF Process Description 7 of 9 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
DMF Refining
REDACTED COPY CLAIM OF CONFIDENTIALITY
DUPONT BELLE PLANT DMF Process Description 8 of 9 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
1.5 STORAGE FACILITIES
REDACTED COPY CLAIM OF CONFIDENTIALITY
DUPONT BELLE PLANT DMF Process Description 9 of 9 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
1.5 STORAGE FACILITIES (Continued)
1.5.2 Storage Tanks
REDACTED COPY CLAIM OF CONFIDENTIALITY
DUPONT BELLE PLANT
DME Process Description 1 of 5 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
1.1 SYNTHESIS
REDACTED COPY CLAIM OF CONFIDENTIALITY
DUPONT BELLE PLANT
DME Process Description 2 of 5 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
1.1 SYNTHESIS (Continued)
1.2 REFINING
REDACTED COPY CLAIM OF CONFIDENTIALITY
DUPONT BELLE PLANT
DME Process Description 3 of 5 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
1.2 REFINING (Continued)
1.3 STORAGE AND HANDLING
REDACTED COPY CLAIM OF CONFIDENTIALITY
DUPONT BELLE PLANT
DME Process Description 4 of 5 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
1.3 STORAGE AND HANDLING (Continued)
REDACTED COPY CLAIM OF CONFIDENTIALITY
DUPONT BELLE PLANT
DME Process Description 5 of 5 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
1.4 VENT SYSTEM
REDACTED COPY CLAIM OF CONFIDENTIALITY
DUPONT BELLE PLANT
DMS Process Description 1 of 8 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
SECTION 1. DIMETHYL SULFATE PROCESS DESCRIPTION
1.1 OVERVIEW
1.2 SO3 STORAGE
REDACTED COPY CLAIM OF CONFIDENTIALITY
DUPONT BELLE PLANT
DMS Process Description 2 of 8 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
SECTION 1. DIMETHYL SULFATE PROCESS DESCRIPTION (Continued)
1.2 SO3 STORAGE (Continued)
REDACTED COPY CLAIM OF CONFIDENTIALITY
DUPONT BELLE PLANT
DMS Process Description 3 of 8 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
SECTION 1. DIMETHYL SULFATE PROCESS DESCRIPTION (Continued)
1.2 SO3 STORAGE (Continued)
REDACTED COPY CLAIM OF CONFIDENTIALITY
DUPONT BELLE PLANT
DMS Process Description 4 of 8 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
SECTION 1. DIMETHYL SULFATE PROCESS DESCRIPTION (Continued)
1.3 DMS CRUDE
REDACTED COPY CLAIM OF CONFIDENTIALITY
DUPONT BELLE PLANT
DMS Process Description 5 of 8 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
SECTION 1. DIMETHYL SULFATE PROCESS DESCRIPTION (Continued)
1.3 DMS CRUDE (Continued)
REDACTED COPY CLAIM OF CONFIDENTIALITY
DUPONT BELLE PLANT
DMS Process Description 6 of 8 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
SECTION 1. DIMETHYL SULFATE PROCESS DESCRIPTION (Continued)
1.4 DMS REFINING
REDACTED COPY CLAIM OF CONFIDENTIALITY
DUPONT BELLE PLANT
DMS Process Description 7 of 8 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
SECTION 1. DIMETHYL SULFATE PROCESS DESCRIPTION (Continued)
1.5 FLARE SYSTEM
REDACTED COPY CLAIM OF CONFIDENTIALITY
DUPONT BELLE PLANT
DMS Process Description 8 of 8 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
SECTION 1. DIMETHYL SULFATE PROCESS DESCRIPTION (Continued)
1.5 FLARE SYSTEM (Continued)
1.6 DMS STORAGE FACILITIES
REDACTED COPY CLAIM OF CONFIDENTIALITY
1 of 2
DuPont Belle Plant
CO Flare Process Description
REDACTED COPY CLAIM OF CONFIDENTIALITY
DuPont Belle Plant
2 of 2 REDACTED COPY CLAIM OF CONFIDENTIALITY
DUPONT BELLE PLANT
Vent Recovery System Process Description 1 of 6 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
1.1 Process Description
1.1.1 Scrubber System
REDACTED COPY CLAIM OF CONFIDENTIALITY
DUPONT BELLE PLANT
Vent Recovery System Process Description 2 of 6 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
1.1 Process Description (Continued)
1.1.2 Soft Water Supply System
1.1.3 Vent Flare System
REDACTED COPY CLAIM OF CONFIDENTIALITY
DUPONT BELLE PLANT
Vent Recovery System Process Description 3 of 6 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
1.1 Process Description (Continued)
1.1.4 Vacuum System
REDACTED COPY CLAIM OF CONFIDENTIALITY
DUPONT BELLE PLANT
Vent Recovery System Process Description 4 of 6 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Equipment Operation and Updates
1.1.5 Vent Recovery System
REDACTED COPY CLAIM OF CONFIDENTIALITY
DUPONT BELLE PLANT
Vent Recovery System Process Description 5 of 6 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
1.3 Equipment Operation and Updates (Continued)
1.3.1 Vent Recovery System (Continued)
1.1.6 Vent Flare System
REDACTED COPY CLAIM OF CONFIDENTIALITY
DUPONT BELLE PLANT
Vent Recovery System Process Description 6 of 6 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
1.3 Equipment Operation and Updates (Continued)
1.1.7 Vacuum System
REDACTED COPY CLAIM OF CONFIDENTIALITY
DUPONT BELLE PLANT
Waste Stripper 1 of 3 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
SECTION 1. WASTE STRIPPER SYSTEM
1.1 Process Description
1.1.1 Overview
REDACTED COPY CLAIM OF CONFIDENTIALITY
DUPONT BELLE PLANT
Waste Stripper 2 of 3 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
1.1 Process Description (Continued)
1.1.1 Overview (Continued)
REDACTED COPY CLAIM OF CONFIDENTIALITY
DUPONT BELLE PLANT
Waste Stripper 3 of 3 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
SECTION 2. CAUSTIC SYSTEM 2.1 Process Description
REDACTED COPY CLAIM OF CONFIDENTIALITY
ATTACHMENT D
REDACTED COPY CLAIM OF CONFIDENTIALITY
Page 1 Attachment D DME-DMS Confidential
Emission Unit ID
Emission Point ID
Internal Equipment Description
Emission Unit Description
Year Installed Design Capacity
Control Device
DMS001 451.002 Redacted Tank 1978 RedactedDMSCD03 DMSCD04
DMS002 451.003 Redacted Tank 1978 Redacted None
DMS003 451.003 Redacted Heat Exchanger 2011 Redacted None
DMS004 451.003 Redacted Filter 1981 Redacted None
DMS005 Redacted Tank 1978 Redacted None
DMS006 Redacted Heat Exchanger 2000 Redacted None
DMS007 451.100 Redacted Reactor 2000 Redacted DMSCD01
DMS008 451.100 Redacted Tank 1978 Redacted DMSCD01
DMS009 451.100 Redacted Eductor 2000 Redacted DMSCD01
DMS010 451.100 Redacted Tank 1989 Redacted DMSCD01
DMS011 451.100 Redacted Eductor 2000 Redacted DMSCD01
DMS012 451.200 Redacted Kettle 1978 Redacted None
DMS013 451.200 Redacted Tank 1978 Redacted None
DMS014 451.200 Redacted Separator 2013 Redacted None
DMS015 451.200 Redacted Heat Exchanger 1978 Redacted None
DMS016 451.200 Redacted Separator 1966 Redacted None
DMS017 451.200 Redacted Vacuum Jet 2000 Redacted None
DMS018 451.200 Redacted Condenser 2000 Redacted None
DMS019 451.200 Redacted Condenser 2000 Redacted None
DMS020 451.200 Redacted Condenser 2000 Redacted None
DMS021 451.100 Redacted Tank 2015 Redacted DMSCD01
DMS022 451.100 Redacted Tank 1937 Redacted DMSCD01
DMS023 451.100 Redacted Tank 1978 Redacted DMSCD01
DMS024 451.100 Redacted Tank 1978 Redacted DMSCD01
DMS025 451.300 Redacted Tank 2000 Redacted None
Chemours - Belle Plant Page [Tab]REDACTED COPY
CLAIM OF CONFIDENTIALITY
Page 2 Attachment D DME-DMS Confidential
Emission Unit ID
Emission Point ID
Internal Equipment Description
Emission Unit Description
Year Installed Design Capacity
Control Device
DMS026 451.100 Redacted Tank 1983 Redacted DMSCD01
DMS027 451.100 Redacted Filter 1975 Redacted DMSCD01
DMS028 451.100 Redacted Separator 1983 Redacted DMSCD01
DMS029 451.100 Redacted Loading Racks pre-1966 Redacted DMSCD01
DMSCD04 451.002 Redacted Demister 2002 RedactedDMSCD03 451.002 Redacted Scrubber 1983 Redacted DMSCD04
DMSCD02
Emergency Back-up and Personnel Protection Only Redacted Mist Eliminator 1988 Redacted
DMSCD01 451.100 Redacted Flare 2000 Redacted
CONTROL DEVICES
Chemours - Belle Plant Page [Tab]REDACTED COPY
CLAIM OF CONFIDENTIALITY
Page 1 Attachment D DME-DMS Confidential
Emission Unit ID Emission Point ID Internal Equipment Description Emission Unit Description Year Installed Design Capacity
Control Device
DME010 451.100 Redacted Tank 1940 Redacted DMSCD01DME020 451.100 Redacted Reactor 1999 Redacted DMSCD01DME021 451.100 Redacted Vaporizer 1998 Redacted DMSCD01DME022 451.100 Redacted Heat Exchanger 1989 Redacted DMSCD01DME023 451.100 Redacted Heat Exchanger 1978 Redacted DMSCD01DME024 451.100 Redacted Filter 1960 Redacted DMSCD01DME025 451.100 Redacted Heater 2005 Redacted DMSCD01DME026 451.100 Redacted Heater 2005 Redacted DMSCD01DME027 451.100 Redacted Filter 1978 Redacted DMSCD01DME040 451.100 Redacted Tank 1969 Redacted DMSCD01DME041 451.100 Redacted Condenser 1996 Redacted DMSCD01DME042 451.100 Redacted Condenser 1996 Redacted DMSCD01DME030 451.100 Redacted Column 1999 Redacted DMSCD01DME031 451.100 Redacted Filter 2001 Redacted DMSCD01DME032 451.100 Redacted Filter 2001 Redacted DMSCD01DME033 451.100 Redacted Heat Transfer Vessel 1963 Redacted DMSCD01DME034 451.100 Redacted Condenser 2001 Redacted DMSCD01DME035 451.100 Redacted Condenser 2001 Redacted DMSCD01DME036 451.100 Redacted Cooler 1975 Redacted DMSCD01DME037 451.100 Redacted Condenser 2009 Redacted DMSCD01DME050 451.100 Redacted Column 1996 Redacted DMSCD01DME051 451.100 Redacted Condenser 2002 Redacted DMSCD01DME052 451.100 Redacted Heat Exchanger 1980 Redacted DMSCD01DME053 451.100 Redacted Reflux Drum 1976 Redacted DMSCD01DME056 451.100 Redacted Cooler 2005 Redacted DMSCD01DME07 451.100 Redacted Tank 1966 Redacted DMSCD01DME08 451.100 Redacted Tank 1974 Redacted DMSCD01DME09 451.100 Redacted Tank 1967 Redacted DMSCD01DME10 451.100 Redacted Tank 1978 Redacted DMSCD01DME11 451.100 Redacted Filter 1986 Redacted DMSCD01DME12 451.100 Redacted Filter 1986 Redacted DMSCD01DME13 451.100 Redacted Product Loading pre-1966 Redacted DMSCD01DME14 451.2 Redacted Tank 2002 Redacted None
RedactedDMSCD01 451.100 Redacted Flare 2000 RedactedCONTROL DEVICES
Chemours - Belle Plant Page [Tab]
REDACTED COPY CLAIM OF CONFIDENTIALITY
Page 1 Attachment D MAP Redacted
Emission Unit ID Emission Point ID
Internal Equipment Description Emission Unit Description Year Installed Design Capacity
Control Device
*** 209.001 Praxair CO Plant CO Plant 1987 3MM SCF/day COFLARE
COFLARE 209.001 CO Flare FlareCONTROL DEVICES
*** This equipment belongs to Praxair and is not included in this permit. It is covered under R13-891. The flare, however, does belong to DuPont and is covered in this permit.
Chemours Belle Plant Page [Page] CO PlantREDACTED COPY
CLAIM OF CONFIDENTIALITY
Page 1 Attachment D MAP Redacted
Emission Unit ID Emission Point ID
Internal Equipment Description Emission Unit DescriptionYear Installed Design Capacity
Control Device
AM01 402.001 REDACTED Tank 1972 REDACTED AMCD01
AM02 402.001 REDACTED Tank 1960 REDACTED AMCD01
AM03 402.001 REDACTED Tank 1960 REDACTED AMCD01
AM04 402.001 REDACTED Tank 1959 REDACTED AMCD01
AM05 402.001 REDACTED Tank 1965 REDACTED AMCD01
AM06 402.001 REDACTED Tank 1993 REDACTED AMCD01
AM07 402.001 REDACTED Heat Exchanger 1969 REDACTED AMCD01
AM08 402.001 REDACTED Heat Exchanger 1980 REDACTED AMCD01
AM09 402.001 REDACTED Heat Exchanger 1981 REDACTED AMCD01
AM10 402.001 REDACTED Tankorig 1968 rik 1995 REDACTED AMCD01
AM11 402.001 REDACTED Heat Exchanger 1973 REDACTED AMCD01
AM12 402.001 REDACTED Heat Exchanger 1985 REDACTED AMCD01
AM13 402.001 REDACTED Heat Exchangerorig 1977; rik 1998 REDACTED AMCD01
AM14 402.001 REDACTED Heat Exchangerorig 1977; rik 1998 REDACTED AMCD01
AM15 402.001 REDACTED Heat Exchangerorig 1977; rik 2000 REDACTED AMCD01
AM16 402.001 REDACTED Heat Exchangerorig 1977; rik 2001 REDACTED AMCD01
AM17 402.001 REDACTED Heat Exchangerspare; not in service REDACTED AMCD01
AM18 402.001 REDACTED Heat Exchangerorig 1977; rik 1998 REDACTED AMCD01
AM19 402.001 REDACTED Heat Exchanger 1997 REDACTED AMCD01
AM20 402.001 REDACTED Heat Exchanger 1972 REDACTED AMCD01
AM21 402.001 REDACTED Heat Exchanger 1972 REDACTED AMCD01
AM22 402.001 REDACTED Heat Exchanger 1960 REDACTED AMCD01
AM23 402.001 REDACTED Heat Exchanger 1998 REDACTED AMCD01
AM24 402.001 REDACTED Reactor 1969 REDACTED AMCD01
AM25 402.001 REDACTED Heat Exchanger 1993 REDACTED AMCD01
AM26 402.001 REDACTED Distillation Column 2000 RIK REDACTED AMCD01Chemours Belle Plant Methyl Amines
Page 2 Attachment D MAP Redacted
Emission Unit ID Emission Point ID
Internal Equipment Description Emission Unit DescriptionYear Installed Design Capacity
Control Device
AM27 402.001 REDACTED Tank 1977 REDACTED AMCD01
AM28 402.001 REDACTED Heat Exchanger 1977 REDACTED AMCD01
AM29 402.001 REDACTED Heat Exchanger 1993 REDACTED AMCD01
AM30 402.001 REDACTED Heat Exchanger 1993 REDACTED AMCD01
AM31 402.001 REDACTED Heat Exchanger 2002 REDACTED AMCD01
AM32 402.001 REDACTED Heat Exchanger 2003 RIK REDACTED AMCD01
AM33 402.001 REDACTED Heat Exchanger 1995 REDACTED AMCD01
AM34 402.001 REDACTED Heat Exchanger 1984 REDACTED AMCD01
AM35 402.001 REDACTED Distillation Column 1968 REDACTED AMCD01
AM36 402.001 REDACTED Heat Exchanger 1993 REDACTED AMCD01
AM37 402.001 REDACTED Heat Exchanger 1997 REDACTED AMCD01
AM38 402.001 REDACTED Heat Exchanger 2003 RIK REDACTED AMCD01
AM39 402.001 REDACTED Distillation Column 1968 REDACTED AMCD01
AM40 402.001 REDACTED Tank 1997 REDACTED AMCD01
AM41 402.001 REDACTED Heat Exchanger 1987 REDACTED AMCD01
AM42 402.001 REDACTED Heat Exchanger 1960 REDACTED AMCD01
AM43 402.001 REDACTED Heat Exchanger 1977 REDACTED AMCD01
AM44 402.001 REDACTED Distillation Column 1963 REDACTED AMCD01
AM45 402.001 REDACTED Tank 1977 REDACTED AMCD01
AM46 402.001 REDACTED Heat Exchanger 1986 REDACTED AMCD01
AM47 402.001 REDACTED Heat Exchanger 1969 REDACTED AMCD01
AM48 402.001 REDACTED Heat Exchanger 1963 REDACTED AMCD01
AM49 402.001 REDACTED Heat Exchanger 1969 REDACTED AMCD01
AM50 402.001 REDACTED Product Loading pre-1966 REDACTED AMCD01
AM51 402.001 REDACTED Tank 1963 REDACTED AMCD01
AM52 402.001 REDACTED Tank 1969 REDACTED AMCD01Chemours Belle Plant Methyl Amines
Page 3 Attachment D MAP Redacted
Emission Unit ID Emission Point ID
Internal Equipment Description Emission Unit DescriptionYear Installed Design Capacity
Control Device
AM53 402.001 REDACTED Tank 1977 REDACTED AMCD01
AM54 402.001 REDACTED Tank 1977 REDACTED AMCD01
AM55 402.001 REDACTED Tank - Removed 1962 REDACTED AMCD01
AM56 402.001 REDACTED Tank 1960 REDACTED AMCD01
AM57 402.001 REDACTED Tank 1960 REDACTED AMCD01
AM58 402.001 REDACTED Tank 1963 REDACTED AMCD01
AM59 402.001 REDACTED Tank 1963 REDACTED AMCD01
AM60 402.001 REDACTED Tank 1977 REDACTED AMCD01
AM61 402.001 REDACTED Tank 1963 REDACTED AMCD01
AM62 402.001 REDACTED Tank 1963 REDACTED AMCD01
AM63 402.001 REDACTED Mixer 1979 REDACTED AMCD01
AM64 402.001 REDACTED Heat Exchanger 1979 REDACTED AMCD01
AM65 402.001 REDACTED Heat Exchanger 1979 REDACTED AMCD01
AM66 402.001 REDACTED Filter 1980 REDACTED AMCD01
AM67 402.001 REDACTED Tank 1963 REDACTED AMCD01
AM68 402.001 REDACTED Mixer 1979 REDACTED AMCD01
AM69 402.001 REDACTED Heat Exchanger 1979 REDACTED AMCD01
AM70 402.001 REDACTED Heat Exchanger 1979 REDACTED AMCD01
AM71 402.001 REDACTED Filter 1980 REDACTED AMCD01
AM72 402.001 REDACTED Tank 1963 REDACTED AMCD01
AM73 402.001 REDACTED Mixer 1979 REDACTED AMCD01
AM74 402.001 REDACTED Heat Exchanger 1979 REDACTED AMCD01
AM75 402.001 REDACTED Heat Exchanger 1979 REDACTED AMCD01
AM76 402.001 REDACTED Filter 1980 REDACTED AMCD01
AM77 402.001 REDACTED Tank 1977 REDACTED AMCD01
AM78 402.003 REDACTED Tank 1956 REDACTED AMCD03Chemours Belle Plant Methyl Amines
Page 4 Attachment D MAP Redacted
Emission Unit ID Emission Point ID
Internal Equipment Description Emission Unit DescriptionYear Installed Design Capacity
Control Device
AM79 AE.001 REDACTED Tank 1966 REDACTED AMCD02
AM80 AE.001 REDACTED Heat Exchanger 1980 REDACTED AMCD02
AM81 AE.001 REDACTED Heat Exchanger 1980 REDACTED AMCD02
AM82 402.001 REDACTED Tank 1935 REDACTED AMCD01REDACTED REDACTED
Wastewater Stripping REDACTED REDACTED
AM83 402.001 REDACTED Tank 1977 REDACTED AMCD01
AM84 402.001 REDACTED Blower 1994 REDACTED AMCD01
AM85 402.001 REDACTED Heat Exchanger 1977 REDACTED AMCD01
AM86 402.001 REDACTED Heat Exchanger 1977 REDACTED AMCD01
AM87 402.001 REDACTED Heat Exchanger 1977 REDACTED AMCD01
AM88 402.001 REDACTED Column 1977 REDACTED AMCD01
AM89 402.001 REDACTED Heat Exchanger 1977 REDACTED AMCD01
AM90 402.001 REDACTED Tank 1976 REDACTED AMCD01
Vent Recovery System REDACTED REDACTED
AM91 402.001 REDACTED Column 1960 REDACTED AMCD01
AM92 402.001 REDACTED Columnorig 1960; rik1997 REDACTED AMCD01
AM93 402.001 REDACTED Tank 1974 REDACTED AMCD01
AM94 402.001 REDACTED Heat Exchanger 1960 REDACTED AMCD01
AM95 402.001 REDACTED Separator 1976 REDACTED AMCD01
AM96 402.001 REDACTED Vacuum Jets pre-1978 REDACTED AMCD01
AM97 402.001 REDACTED Heat Exchanger 1995 REDACTED AMCD01
AM98 402.001 REDACTED Tank 2015 REDACTED AMCD01CONTROL DEVICES REDACTED REDACTEDAMCD01 402.001 REDACTED Flare 1976 REDACTEDAMCD02 AE.001 REDACTED Flare REDACTEDAMCD03 402.003 REDACTED Internal Floating Roof 2006 REDACTED
Chemours Belle Plant Methyl Amines
Page 1 Attachment D MAP Redacted
Emission Unit ID Emission Point ID
Internal Equipment Description Emission Unit Description Year Installed Design Capacity
Control Device
DMAC01 432.002 Redacted Tank 1960 Redacted None
DMAC02 402.001 Redacted Reactor 1960 Redacted AMCD01
DMAC03 402.001 Redacted Heat Exchanger 1960 Redacted AMCD01
DMAC04 402.001 Redacted Heat Exchanger 1960 Redacted AMCD01
DMAC05 402.001 Redacted Column 1960 Redacted AMCD01
DMAC06 402.001 Redacted Heat Exchanger 1960 Redacted AMCD01
DMAC07 402.001 Redacted Heat Exchanger 1999 Redacted AMCD01
DMAC08 402.001 Redacted Tank 1937 Redacted AMCD01
DMAC09 402.001 Redacted Column 2000 Redacted AMCD01
DMAC10 402.001 Redacted Heat Exchanger 1998 Redacted AMCD01
DMAC11 402.001 Redacted Heat Exchanger 1990 Redacted AMCD01
DMAC12 402.001 Redacted Heat Exchanger 2002 Redacted AMCD01
DMAC13 402.001 Redacted Vacuum Jet 1960 Redacted AMCD01
DMAC14 402.001 Redacted KO Pots 1960 Redacted AMCD01
DMAC15 432.002 Redacted Tank 1960 Redacted None
DMAC16 432.002 Redacted Tank pre-1961 Redacted None
DMAC17 432.002 Redacted Tank 1963 Redacted None
DMAC18 432.002 Redacted Tank 1960 Redacted None
DMAC19 432.002 Redacted Tank 1960 Redacted None
DMAC20 432.003 Redacted Filter 1997 RIK Redacted None
DMAC21 432.003 Redacted Product Loading pre-1960 Redacted None
AMCD01 402.001 Redacted Flare 1976 RedactedCONTROL DEVICES
Chemours Belle Plant DMACREDACTED COPY
CLAIM OF CONFIDENTIALITY
Page 1 Attachment D MAP Redacted
Emission Unit ID Emission Point ID
Internal Equipment Description
Emission Unit Description Year Installed Design Capacity
Control Device
DMF01 421.004 Redacted Tank 1959 Redacted None
DMF02 402.001 Redacted Reactor 1981 Redacted AMCD01
DMF03 402.001 Redacted Heat Exchanger 1969 Redacted AMCD01
DMF04 402.001 Redacted Heat Exchanger 1986 Redacted AMCD01
DMF05 402.001 Redacted Heat Exchanger 2000 Redacted AMCD01
DMF06 402.001 Redacted Heat Exchanger 1988 Redacted AMCD01
DMF07 402.001 Redacted Heat Exchanger 1969 Redacted AMCD01
DMF08 402.001 Redacted Tankorig 1963; rik 1988 Redacted AMCD01
DMF09 402.001 Redacted Heat Exchanger 1993 Redacted AMCD01
DMF10 402.001 Redacted Filter 1979 Redacted AMCD01
DMF11 402.001 Redacted Tank 1976 Redacted none
DMF12 402.001 Redacted Tank 1976 Redacted AMCD01
DMF13 402.001 Redacted Tank 1963 Redacted AMCD01
DMF14 402.001 Redacted Heat Exchanger 1982 Redacted AMCD01
DMF15 402.001 Redacted Distillation Column 1963 Redacted AMCD01
DMF16 402.001 Redacted Heat Exchanger 1983 Redacted AMCD01
DMF17 402.001 Redacted Heat Exchangerorig 1963; rik 1985 Redacted AMCD01
DMF18 402.001 Redacted Heat Exchanger 1998 Redacted AMCD01
DMF19 402.001 Redacted Heat Exchanger 1999 Redacted AMCD01
DMF20 402.001 Redacted Distillation Column 1963 Redacted AMCD01
DMF21 402.001 Redacted Heat Exchanger 1985 Redacted AMCD01
DMF22 402.001 Redacted Heat Exchanger 1963 Redacted AMCD01
DMF23 402.001 Redacted Demister Pad 1960 Redacted AMCD01
DMF24 402.001 Redacted Heat Exchanger 1960 Redacted AMCD01
DMF25 402.001 Redacted Heat Exchanger 1960 Redacted AMCD01Chemours Belle Plant DMF/MMF
REDACTED COPY CLAIM OF CONFIDENTIALITY
Page 2 Attachment D MAP Redacted
Emission Unit ID Emission Point ID
Internal Equipment Description
Emission Unit Description Year Installed Design Capacity
Control Device
DMF26 421.004 Redacted Tank 1969 Redacted none
DMF27 421.004 Redacted Filter 1985 Redacted none
DMF28 421.004 Redacted Tank 1935 Redacted none
DMF29 421.004 Redacted Tank 1935 Redacted none
DMF30 421.004 Redacted Tank pre-1978 Redacted none
DMF31 421.004 Redacted Tank out of service Redacted none
DMF32 421.004 Redacted Tank out of service Redacted AMCD01
DMF33 421.004 Redacted Tank out of service Redacted none
DMF34 421.004 Redacted Tank 1976 Redacted none
DMF35 421.004 Redacted Tank 1977 Redacted none
DMF36 421.004 Redacted Tank 1935 Redacted none
DMF37 421.004 Redacted Tank 1935 Redacted none
DMF38 421.004 Redacted Tank out of service Redacted none
DMF39 421.004 Redacted Tank out of service Redacted none
DMF40 421.004 Redacted Tank 1977 Redacted none
DMF41 421.004 Redacted Tank 1977 Redacted none
DMF42 421.004 Redacted Loading Racks pre-1960 Redacted none
DMF43 421.004 Redacted Loading Racks pre-1960 Redacted none
AMCD01 402.001 Redacted Flare 1976 RedactedCONTROL DEVICES
Chemours Belle Plant DMF/MMFREDACTED COPY
CLAIM OF CONFIDENTIALITY
ATTACHMENT E
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM01
Redacted
1972
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Methanol
Dimethylforamide
Ammonia
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
Stack testing
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0.07 0.31
6.81 29.83
1.31 5.74
0 0
175.6
PPH TPY
0 0
767.02
0 0
0 0
0 0
0 0
148.44 648.39
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM02
Redacted
1960
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM03
Redacted
1960
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM04
Redacted
1959
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM05
Redacted
1965
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM06
Redacted
1993
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
Southern Heat Exchanger
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM07
Redacted
2011
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
Southern Heat Exchanger
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM08
Redacted
2014
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM09
Redacted
1981
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM10
Redacted
1968
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
RIK-1995
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM11
Redacted
1973
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
Southern Heat Exchanger
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM12
Redacted
1985
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
Sistersville Tank Works
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM13
Redacted
1977
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
RIK-1998
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
Sistersville Tank Works
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM14
Redacted
1977
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
RIK-1998
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM15
Redacted
1977
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
RIK-2000
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM16
Redacted
1977
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
RIK-2001
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM17
Redacted
Spare - not in service
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM18
Redacted
1977
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
RIK-1998
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
Vulcan
Construction Date:0
Maximum Hourly Throughput:
0
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
AMCD01AM19
0
0
1997
Serial Number:
0
0 0
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
Sistersville Tank Works
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM20
Redacted
2006
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
Sistersville Tank Works
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM21
Redacted
2006
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
Krueger Eng and Mfg Co.
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM22
Redacted
2006
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
2006
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
Krueger Eng and Mfg Co.
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM23
Redacted
2006
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
2006
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM24
Redacted
1969
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Reactor
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM25
Redacted
1993
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM26
Redacted
0
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Distillation Column
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM27
Redacted
1977
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM28
Redacted
1977
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM29
Redacted
1993
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM30
Redacted
1993
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
Southern Heat Exchanger
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM31
Redacted
2002
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
Southern Heat Exchanger
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM32
Redacted
0
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
RIK-2009
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM33
Redacted
1995
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM34
Redacted
1984
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM35
Redacted
1968
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Distillation Column
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM36
Redacted
1993
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM37
Redacted
1997
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM38
Redacted
0
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
RIK-2003
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM39
Redacted
1968
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Distillation Column
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
Sistersville Tank Works
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM40
Redacted
1997
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM41
Redacted
1987
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM42
Redacted
1960
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM43
Redacted
1977
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM44
Redacted
1963
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Distillation Column
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM45
Redacted
1977
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM46
Redacted
1986
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM47
Redacted
1969
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
Graham
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM48
Redacted
1963
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
0
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
Graham
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM49
Redacted
2006 RIK
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM50
Redacted
pre-1966
Serial Number:
0
0 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Product Loading
Emission unit name:
0
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM51
Redacted
1963
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM52
Redacted
1969
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM53
Redacted
1977
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM54
Redacted
1977
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Serial Number:
0
Redacted 168 hrs/week
AMCD01AM55
Redacted
Removed
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
See AM01 0
PPH TPY
0 0
0 0
0 0
0 0
0 0
0
PPH TPY
0 0
0
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
_X_Yes __No
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM56
Redacted
1960
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM57
Redacted
1960
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM58
Redacted
1963
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM59
Redacted
1963
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM60
Redacted
1977
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM61
Redacted
1963
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM62
Redacted
1963
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM63
Redacted
1979
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Mixer
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
0
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM64
Redacted
1979
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM65
Redacted
1979
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM66
Redacted
1980
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Filter
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
0
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM67
Redacted
1963
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM68
Redacted
1979
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Mixer
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
0
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM69
Redacted
1979
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM70
Redacted
1979
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM71
Redacted
1980
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Filter
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
0
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM72
Redacted
1963
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM73
0
1979OOS
Serial Number:
0
Redacted 0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Mixer
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
0
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM74
0
1979OOS
Serial Number:
0
Redacted 0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM75
0
1979OOS
Serial Number:
0
Redacted 0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM76
0
1980OOS
Serial Number:
0
Redacted 0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Filter
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
0
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM77
Redacted
1977
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD03AM78
Redacted
1997
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Methanol
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
Emission Factors
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
4.11 18
0 0
4.11
PPH TPY
0 0
18
0 0
0 0
0 0
0 0
0 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD02AM79
Redacted
1966
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
Emission Factors
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
0 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD02AM80
Redacted
1980
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
0
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM79 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD02AM81
Redacted
1980
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
0
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM79 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
Chattanooga Boiler and Tank Co
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM82
Redacted
2014
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Methanol
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0.298469178 1.307295
0 0
0.298469178
PPH TPY
0 0
1.307295
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
Chattanooga Boiler and Tk Works
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM83
Redacted
2011
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
SIHI
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM84
Redacted
2011
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Blower
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
Southern Heat Exchanger
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM85
Redacted
1977
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
Southern Heat Exchanger
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM86
Redacted
1977
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
Southern Heat Exchanger
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM87
Redacted
1977
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
Sistersville Tank Works
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM88
Redacted
1977
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Column
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
Superior Welding Co.
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM89
Redacted
1977
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
A.J. Schmitt Co.
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM90
Redacted
1976
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM91
Redacted
1960
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Column
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM92
Redacted
1960
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Column
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
RIK-1997
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM93
Redacted
1974
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
Alfa Laval
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM94
Redacted
1960
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM95
Redacted
1976
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Separator
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:Ametek, Schutte and Koerting DivisionsConstruction Date:0
Maximum Hourly Throughput:
0
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM96
Redacted
pre-1978
Serial Number:
0
0 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Vacuum Jets
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
0
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
Graham
Construction Date:0
Maximum Hourly Throughput:
0
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01AM97
Redacted
1995
Serial Number:
0
0 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Serial Number:
0
Redacted 168 hrs/week
AMCD01AM98
Redacted
2015
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
See AM01 0
PPH TPY
0 0
0 0
0 0
0 0
0 0
0
PPH TPY
0 0
0
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
_X_Yes __No
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
NoneDMAC01
Redacted
1960
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
Emission Factors
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0.004
PPH TPY
0 0
0.009
0 0
0 0
0 0
0 0
0 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01DMAC02
Redacted
1960
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Reactor
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01DMAC03
Redacted
1960
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
0
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01DMAC04
Redacted
1960
Serial Number:
0
0 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01DMAC05
Redacted
1960
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Column
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01DMAC06
Redacted
1960
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01DMAC07
Redacted
1999
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
0
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01DMAC08
Redacted
1937
Serial Number:
0
0 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01DMAC09
Redacted
2000
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Column
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01DMAC10
Redacted
1998
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01DMAC11
Redacted
1990
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01DMAC12
Redacted
2002
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
0
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01DMAC13
Redacted
1960
Serial Number:
0
0 0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Vacuum Jet
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
0
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01DMAC14
Redacted
1960
Serial Number:
0
0 0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Packed Column
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
NoneDMAC15
Redacted
1960
Serial Number:
0
Redacted 168 hrsweek
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
Emission Factors
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0.002
PPH TPY
0 0
0.01
0 0
0 0
0 0
0 0
0 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
NoneDMAC16
Redacted
pre-1961
Serial Number:
0
0 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Fired heater
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
Emission Factors
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0.0006
PPH TPY
0 0
0.0026
0 0
0 0
0 0
0 0
0 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
NoneDMAC17
Redacted
1963
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Fired heater
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
Emission Factors
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0.0051
PPH TPY
0 0
0.0225
0 0
0 0
0 0
0 0
0 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
NoneDMAC18
Redacted
1960
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Steam Boiler
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
Emission Factors
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0.005
PPH TPY
0 0
0.021
0 0
0 0
0 0
0 0
0 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
NoneDMAC19
Redacted
1960
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
Emission Factors
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0.005
PPH TPY
0 0
0.022
0 0
0 0
0 0
0 0
0 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
NoneDMAC20
Redacted
0
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Packed Column
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
RIK-1997
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
Emission Factors
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See DMAC21 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
NoneDMAC21
Redacted
pre-1960
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Contact cooler/ scrubber
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
Emission Factors
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0.0086
PPH TPY
0 0
0.037
0 0
0 0
0 0
0 0
0 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
NoneDMF01
Redacted
1959
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Methanol
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
1.48 6.5
0 0
1.48
PPH TPY
0 0
6.5
0 0
0 0
0 0
0 0
0 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01DMF02
Redacted
1981
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Reactor
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
RAS Process Equipment
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01DMF03
Redacted
2013
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Demisting Vessel
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
RAS Process Equipment
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01DMF04
Redacted
2014
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Packed Column
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01DMF05
Redacted
2000
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01DMF06
Redacted
1988
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01DMF07
Redacted
1969
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01DMF08
Redacted
1963
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
RIK-1988
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01DMF09
Redacted
1993
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01DMF10
Redacted
1979
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Filter
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
NoneDMF11
Redacted
1976
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01DMF12
Redacted
1976
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01DMF13
Redacted
1963
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01DMF14
Redacted
1982
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01DMF15
Redacted
1963
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Distillation Column
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01DMF16
Redacted
1983
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
RAS Process Equipment
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01DMF17
Redacted
2012
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
RIK-1985
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01DMF18
Redacted
1998
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01DMF19
Redacted
1999
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01DMF20
Redacted
1963
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Distillation Column
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
RAS Process Equipment
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01DMF21
Redacted
2012
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
Ward Tank & Heat Exchanger
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01DMF22
Redacted
2014
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01DMF23
Redacted
1960
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Demister Pad
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01DMF24
Redacted
1960
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01DMF25
Redacted
1960
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
NoneDMF26
Redacted
1969
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Dimethylformamide
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0.00002 0.00009
0 0
0.00002
PPH TPY
0 0
0.00009
0 0
0 0
0 0
0 0
0 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
NoneDMF27
Redacted
1985
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Filter
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See DMF26 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01DMF28
Redacted
1935
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
Chattanooga Boiler and Tank Co
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
NoneDMF29
Redacted
2014
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Dimethylformamide
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0.148 0.649
0 0
0.248
PPH TPY
0 0
1.084
0 0
0 0
0 0
0 0
See AM01 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
NoneDMF30
Redacted
pre-1978
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
0 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
NoneDMF31
Redacted
OOS
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
OOS Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
0 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
Chattanooga Boiler and Tank Co
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
AMCD01DMF32
Redacted
2014
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
51,138 gal
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Methanol
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0.410621005 1.79852
0 0
0.410621005
PPH TPY
0 0
1.79852
0 0
0 0
0 0
0 0
0 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
NoneDMF33
Redacted
OOS
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
OOS Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
0 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
NoneDMF34
Redacted
1976
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0.003
PPH TPY
0 0
0.015
0 0
0 0
0 0
0 0
0 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
NoneDMF35
Redacted
1977
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0.003
PPH TPY
0 0
0.015
0 0
0 0
0 0
0 0
0 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
NoneDMF36
Redacted
OOS
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
OOS Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
0
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Dimethylformamide
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
Emission Factors
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0.004 0.019
0 0
0.004
PPH TPY
0 0
0.019
0 0
0 0
0 0
0 0
0 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
Chattanooga Boiler and Tank Co
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
NoneDMF37
Redacted
2014
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
51,138 gal
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Dimethylformamide
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
Emission Factors
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0.2067 0.9055
0 0
0.20673516
PPH TPY
0 0
0.9055
0 0
0 0
0 0
0 0
0 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
NoneDMF38
Redacted
OOS
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
OOS Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
0 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
NoneDMF39
Redacted
OOS
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
OOS Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
0 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
NoneDMF40
Redacted
1977
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Dimethylformamide
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
Emission Factors
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0.015 0.065
0 0
0.015
PPH TPY
0 0
0.065
0 0
0 0
0 0
0 0
0 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
NoneDMF41
Redacted
1977
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Dimethylformamide
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
Emission Factors
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0.014 0.061
0 0
0.014
PPH TPY
0 0
0.061
0 0
0 0
0 0
0 0
0 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
NoneDMF42
Redacted
pre-1960
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Loading Racks
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Dimethylformamide
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
Emission Factors
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0.028 0.124
0 0
0.028
PPH TPY
0 0
0.124
0 0
0 0
0 0
0 0
0 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes _X_No
___Indirect Fired ___Direct Fired
Fuel Type Max. Ash Content BTU Value
NoneDMF43
Redacted
pre-1960
Serial Number:
0
Redacted 168 hrs/week
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Loading Racks
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Model Number:
Installation Date:
Maximum Annual Throughput:
0
Redacted
Maximum Operating Schedule:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
See DMF42 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See Permit R30-03900001 Group 5 of 5
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See Permit R30-03900001 Group 5 of 5
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:1978
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD03 DMSCD04DMS001
0
0
1978
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:2010
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
NoneDMS002
0
0
2010
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:2011
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
NoneDMS003
0
0
2011
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Filter
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:1981 RIK 2003
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
NoneDMS004
0
0
1981
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:1978
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
NoneDMS005
0
0
1978
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:2000
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
NoneDMS006
0
0
2000
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:2000
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DMS007
0
0
2000
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Reactor
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Methanol
Dimethylsulfate
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0.026 0.113
0.009 0.039
0 0
0 0
104.04
PPH TPY
0 0
455.67
0 0
0 0
0 0
0 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:Reused Oleum Tank
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DMS008
0
0
1978
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:2000
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DMS009
0
0
2000
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Eductor
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DMS010
0
0
1989
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:2000
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DMS011
0
0
2000
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Eductor
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
NoneDMS012
0
0
1978
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Kettle
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
NoneDMS013
0
0
1978
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
NoneDMS014
0
0
2013
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Separator
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
NoneDMS015
0
0
1978
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
NoneDMS016
0
0
1966
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Separator
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:2000
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
NoneDMS017
0
0
2000
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Vacuum Jet
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Methanol
Dimethylsulfate
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0.026 0.113
0.009 0.039
0 0
0 0
104.03
PPH TPY
0 0
455.67
0 0
0 0
0 0
0 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:2000
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
NoneDMS018
0
0
2000
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Condenser
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS018 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:2000
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
NoneDMS019
0
0
2000
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Condenser
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS018 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:2000
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
NoneDMS020
0
0
2000
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Condenser
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS018 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:2000
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
NoneDMS020
0
0
2000
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Condenser
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS018 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DMS021
0
0
2015
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DMS022
0
0
1937
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DMS023
0
0
1978
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DMS024
0
0
1978
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:2000
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
NoneDMS025
0
0
2000
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DMS026
0
0
1983
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DMS027
0
0
1975
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Filter
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DMS028
0
0
1983
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Separator
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DMS029
0
0
pre-1966
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Loading Racks
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DME010
0
0
1940
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:1999
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DME020
0
0
1999
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Reactor
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:1998
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DME021
0
0
1998
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Vaporizer
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:1989
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DME022
0
0
1989
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:1978
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DME023
0
0
1978
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DME024
0
0
1960
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Filter
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DME025
0
0
2005
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heater
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DME026
0
0
2005
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heater
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DME027
0
0
1978
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Filter
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:1968
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DME040
0
0
1969
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:1996
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DME041
0
0
1996
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Condenser
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:1996
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DME042
0
0
1996
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Condenser
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:1999
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DME030
0
0
1999
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Column
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DME031
0
0
2001
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Filter
Emission unit name:
0
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DME032
0
0
2001
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Filter
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DME033
0
0
1963
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Transfer Vessel
Emission unit name:
0
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:2001
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DME034
0
0
2001
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Condenser
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:2001
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DME035
0
0
2001
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Condenser
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DME036
0
0
1975
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Cooler
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DME037
0
0
2009
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Condenser
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DME050
0
0
1996
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Column
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:2002
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DME051
0
0
2002
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Condenser
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
Placite coated inside both heads 7/199
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:1980
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DME052
0
0
1980
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Heat Exchanger
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DME053
0
0
1976
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Reflux Drum
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DME056
0
0
2005
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Cooler
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DME07
0
0
1966
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DME08
0
0
1974
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DME09
0
0
1967
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DME10
0
0
1978
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:1986
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DME11
0
0
1986
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Filter
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:1986
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DME12
0
0
1986
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Filter
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:0
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
DMSCD01DME13
0
0
pre-1966
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Product Loading
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
See DMS007 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
Emission Unit Description
Emission unit ID number:
Manufacturer:
0
Construction Date:2002
Maximum Hourly Throughput:
Redacted
___Yes ___No
___Indirect Fired ___Direct Fired
00
Fuel Type Max. Ash Content BTU Value
0 0 0
0 0 0
NoneDME14
0
0
2002
Serial Number:
0
Redacted 0
0
Model Number:
Installation Date:
Maximum Annual Throughput:
0
ATTACHMENT E - Emission Unit Form
Provide a description of the emission unit (type, method of operation, design parameters, etc.):
Tank
Emission unit name:
Redacted
List any control devices associated with this emission unit:
Modification Date:
Fuel Usage Data (fill out all applicable fields)
0
Design Capacity (examples: furnaces - tons/hr, tanks - gallons):
Maximum design heat input and/or maximum horsepower rating:
Does this emission unit combust fuel? If yes, is it?
Type and Btu/hr rating of burners:
Redacted
Maximum Operating Schedule:
0
00
0
List the primary fuel type(s) and if applicable, the secondary fuel type(s). For each fuel type listed, provide the maximum hourly and annual fuel usage for each.
00
Max. Sulfur Content
Describe each fuel expected to be used during the term of the permit.
0
REDACTED COPY CLAIM OF CONFIDENTIALITY
Criteria Pollutants
Carbon Monoxide (CO)
Nitrogen Oxides (NOX)
Lead (Pb)
Particulate Matter (PM2.5)
Particulate Matter (PM10)
Total Particulate Matter (TSP)
Sulfur Dioxide (SO2)
Volatile Organic Compounds (VOC)
Hazardous Air Pollutants
Emissions Data
Potential Emissions
Potential Emissions
Regulated Pollutants other than Criteria and HAP
Potential Emissions
PPH TPY
List the method(s) used to calculate the potential emissions (include dates of any stack tests conducted, versions of software used, source and dates of emission factors, etc.).
0 0
0 0
0
PPH TPY
0 0
0
0 0
0 0
0 0
0 0
PPH TPY
REDACTED COPY CLAIM OF CONFIDENTIALITY
_X_Yes __No Are you in compliance with all applicable requirements for this emission unit?
If no, complete the Schedule of Compliance Form as ATTACHMENT F.
See permit R30-0390001
List all applicable requirements for this emission unit. For each applicable requirement, include the underlying rule/regulation citation and/or construction permit with the condition number. (Note: Title V permit condition numbers alone are not the underlying applicable requirements ). If an emission limit is calculated based on the type of source and design capacity or if a standard is based on a design parameter, this information should also be included.
For all applicable requirements listed above, provide monitoring/testing/recordkeeping/reporting which shall be used to demonstrate compliance. If the method is based on a permit or rule, include the condition number or citation. (Note: Each requirement listed above must have an associated method of demonstrating compliance. If there is not already a required method in place, then a method must be proposed.)
See permit R30-03900001
____ Permit Shield
Applicable Requirements
REDACTED COPY CLAIM OF CONFIDENTIALITY
ATTACHMENT F
N/A
REDACTED COPY CLAIM OF CONFIDENTIALITY
ATTACHMENT G
REDACTED COPY CLAIM OF CONFIDENTIALITY
Air Pollution Control Device Form (control_device.doc) Page 1 of 2
Revised – 01/31/07
Page ___1__ of __2___
ATTACHMENT G - Air Pollution Control Device Form
Control device ID number: AMCD01
List all emission units associated with this control device. AM01-AM77, AM82-AM97, DMF02-DMF25, DMAC02-DMAC14
Manufacturer: John Zinc
Model number:
Unknown
Installation date:
1976
Type of Air Pollution Control Device: ___ Baghouse/Fabric Filter ___ Venturi Scrubber ___ Multiclone ___ Carbon Bed Adsorber __ Packed Tower Scrubber ___ Single Cyclone ___ Carbon Drum(s) ___ Other Wet Scrubber ___ Cyclone Bank ___ Catalytic Incinerator ___ Condenser ___ Settling Chamber ___ Thermal Incinerator __x_ Flare ___ Other (describe) ________________ ___ Wet Plate Electrostatic Precipitator ___ Dry Plate Electrostatic Precipitator
List the pollutants for which this device is intended to control and the capture and control efficiencies.
Pollutant Capture Efficiency Control Efficiency
Methanol 100% 98%
Ammonia 100% 98%
Dimethylformamide 100% 98%
Monomethylformamide 100% 98%
Monomethylamines 100% 98%
Dimethylamines 100% 98%
Trimethylamines 100% 98%
Dimethylacetamide 100% 98%
Carbon Monoxide 100% 98%
Explain the characteristic design parameters of this control device (flow rates, pressure drops, number of bags, size, temperatures, etc.). Total Heat Value = 5.5 MMBTU/hour
Natural Gas Flow Rate = 14.6 MSCFH
Is this device subject to the CAM requirements of 40 C.F.R. 64? ___ Yes _X_ No
If Yes, Complete ATTACHMENT H
If No, Provide justification. This control device is subject to the monitoring requirements of the MON. Emissions from this unit are below defined level for major source.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Air Pollution Control Device Form (control_device.wpd) Page 2 of 2
Revised - 3/1/04
Page ___2__ of __2___
Describe the parameters monitored and/or methods used to indicate performance of this control device. Monitor flame presence
REDACTED COPY CLAIM OF CONFIDENTIALITY
Air Pollution Control Device Form (control_device.doc) Page 1 of 2
Revised – 01/31/07
Page ___1__ of __1___
ATTACHMENT G - Air Pollution Control Device Form
Control device ID number: AMCD02
List all emission units associated with this control device. AM79
Manufacturer: John Zinc
Model number:
Installation date:
Type of Air Pollution Control Device: ___ Baghouse/Fabric Filter ___ Venturi Scrubber ___ Multiclone ___ Carbon Bed Adsorber __ Packed Tower Scrubber ___ Single Cyclone ___ Carbon Drum(s) ___ Other Wet Scrubber ___ Cyclone Bank ___ Catalytic Incinerator ___ Condenser ___ Settling Chamber ___ Thermal Incinerator __x_ Flare ___ Other (describe) ________________ ___ Wet Plate Electrostatic Precipitator ___ Dry Plate Electrostatic Precipitator
List the pollutants for which this device is intended to control and the capture and control efficiencies.
Pollutant Capture Efficiency Control Efficiency
Ammonia 100% 98%
Explain the characteristic design parameters of this control device (flow rates, pressure drops, number of bags, size, temperatures, etc.). NH3 Flow to Flare = 35 MSCFH Natural Gas Pressure to Flare
Is this device subject to the CAM requirements of 40 C.F.R. 64? ___ Yes _X_ No
If Yes, Complete ATTACHMENT H
If No, Provide justification. This control device is subject to the monitoring requirements of the MON. Emissions from this unit are below defined level for major source.
Describe the parameters monitored and/or methods used to indicate performance of this control device. Monitor flame presence
REDACTED COPY CLAIM OF CONFIDENTIALITY
Air Pollution Control Device Form (control_device.doc) Page 1 of 2
Revised – 01/31/07
Page ___1__ of __1___
ATTACHMENT G - Air Pollution Control Device Form
Control device ID number: AMCD03
List all emission units associated with this control device. AM78
Manufacturer:
Model number:
Installation date:
2006
Type of Air Pollution Control Device: ___ Baghouse/Fabric Filter ___ Venturi Scrubber ___ Multiclone ___ Carbon Bed Adsorber __ Packed Tower Scrubber ___ Single Cyclone ___ Carbon Drum(s) ___ Other Wet Scrubber ___ Cyclone Bank ___ Catalytic Incinerator ___ Condenser ___ Settling Chamber ___ Thermal Incinerator ___ Flare _X__ Internal Floating Roof ___ Wet Plate Electrostatic Precipitator ___ Dry Plate Electrostatic Precipitator
List the pollutants for which this device is intended to control and the capture and control efficiencies.
Pollutant Capture Efficiency Control Efficiency
Methanol 100% 98%
Explain the characteristic design parameters of this control device (flow rates, pressure drops, number of bags, size, temperatures, etc.). Maximum Filling Capacity of Tank
Is this device subject to the CAM requirements of 40 C.F.R. 64? ___ Yes _X_ No
If Yes, Complete ATTACHMENT H
If No, Provide justification. This control device is subject to the monitoring requirements of the MON. Emissions from this unit are below defined level for major source.
Describe the parameters monitored and/or methods used to indicate performance of this control device. Visual inspections
REDACTED COPY CLAIM OF CONFIDENTIALITY
Air Pollution Control Device Form (control_device.doc) Page 1 of 2
Revised – 01/31/07
Page ___1__ of __1___
ATTACHMENT G - Air Pollution Control Device Form
Control device ID number: COFLARE
List all emission units associated with this control device.
Praxair CO Plant
Manufacturer: McGill Industries
Model number:
Redacted
Installation date:
Type of Air Pollution Control Device: ___ Baghouse/Fabric Filter ___ Venturi Scrubber ___ Multiclone ___ Carbon Bed Adsorber __ Packed Tower Scrubber ___ Single Cyclone ___ Carbon Drum(s) ___ Other Wet Scrubber ___ Cyclone Bank ___ Catalytic Incinerator ___ Condenser ___ Settling Chamber ___ Thermal Incinerator _x__ Flare ___ Internal Floating Roof ___ Wet Plate Electrostatic Precipitator ___ Dry Plate Electrostatic Precipitator
List the pollutants for which this device is intended to control and the capture and control efficiencies.
Pollutant Capture Efficiency Control Efficiency
CO 100% 98%
Explain the characteristic design parameters of this control device (flow rates, pressure drops, number of bags, size, temperatures, etc.). Heat value and velocity of gas.
Is this device subject to the CAM requirements of 40 C.F.R. 64? ___ Yes _X_ No
If Yes, Complete ATTACHMENT H
If No, Provide justification. This control device is subject to the monitoring requirements of the MON. Emissions from this unit are below defined level for major source.
Describe the parameters monitored and/or methods used to indicate performance of this control device. Amount of CO sent to flare and number of hours per day CO is sent to the flare.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Air Pollution Control Device Form (control_device.doc) Page 1 of 2
Revised – 01/31/07
Page __1___ of __1___
ATTACHMENT G - Air Pollution Control Device Form
Control device ID number: DMSCD01
List all emission units associated with this control device. DMS007-DMS011, DMS021-DMS024, DMS026-DMS029, DME07-DME056
Manufacturer: John Zink
Model number:
Installation date:
2000
Type of Air Pollution Control Device: ___ Baghouse/Fabric Filter ___ Venturi Scrubber ___ Multiclone ___ Carbon Bed Adsorber __ Packed Tower Scrubber ___ Single Cyclone ___ Carbon Drum(s) ___ Other Wet Scrubber ___ Cyclone Bank ___ Catalytic Incinerator ___ Condenser ___ Settling Chamber ___ Thermal Incinerator _x__ Flare ___ Other (describe) ________________ ___ Wet Plate Electrostatic Precipitator ___ Dry Plate Electrostatic Precipitator
List the pollutants for which this device is intended to control and the capture and control efficiencies.
Pollutant Capture Efficiency Control Efficiency
Methanol 100% 98%
DME 100% 98%
DMS 100% 98%
Explain the characteristic design parameters of this control device (flow rates, pressure drops, number of bags, size, temperatures, etc.). Total Heat Value = 5.5 MMBTU/hour Natural Gas Flow to Flare = 700 SCFH
Is this device subject to the CAM requirements of 40 C.F.R. 64? ___ Yes _X_ No
If Yes, Complete ATTACHMENT H
If No, Provide justification. This control device is subject to the monitoring requirements of the MON. Emissions from this unit are below defined level for major source.
Describe the parameters monitored and/or methods used to indicate performance of this control device. Flame presence
REDACTED COPY CLAIM OF CONFIDENTIALITY
Air Pollution Control Device Form (control_device.doc) Page 1 of 2
Revised – 01/31/07
Page __1___ of __1___
ATTACHMENT G - Air Pollution Control Device Form
Control device ID number: DMSCD02
List all emission units associated with this control device. DMS001
Manufacturer: Monsanto
Model number:
Installation date:
1988
Type of Air Pollution Control Device: ___ Baghouse/Fabric Filter ___ Venturi Scrubber ___ Multiclone ___ Carbon Bed Adsorber __ Packed Tower Scrubber ___ Single Cyclone ___ Carbon Drum(s) ___ Other Wet Scrubber ___ Cyclone Bank ___ Catalytic Incinerator ___ Condenser ___ Settling Chamber ___ Thermal Incinerator ___ Flare __x_ Mist Eliminator ___ Wet Plate Electrostatic Precipitator ___ Dry Plate Electrostatic Precipitator
List the pollutants for which this device is intended to control and the capture and control efficiencies.
Pollutant Capture Efficiency Control Efficiency
SO3 100% 98%
Explain the characteristic design parameters of this control device (flow rates, pressure drops, number of bags, size, temperatures, etc.).
Is this device subject to the CAM requirements of 40 C.F.R. 64? ___ Yes _X_ No
If Yes, Complete ATTACHMENT H
If No, Provide justification. This control device is subject to the monitoring requirements of the MON. Emissions from this unit are below defined level for major source.
Describe the parameters monitored and/or methods used to indicate performance of this control device.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Air Pollution Control Device Form (control_device.doc) Page 1 of 2
Revised – 01/31/07
Page __1___ of __1___
ATTACHMENT G - Air Pollution Control Device Form
Control device ID number: DMSCD03
List all emission units associated with this control device. DMS001
Manufacturer: Alloy Fabricators
Model number:
Installation date:
1983
Type of Air Pollution Control Device: ___ Baghouse/Fabric Filter ___ Venturi Scrubber ___ Multiclone ___ Carbon Bed Adsorber _X_ Packed Tower Scrubber ___ Single Cyclone ___ Carbon Drum(s) ___ Other Wet Scrubber ___ Cyclone Bank ___ Catalytic Incinerator ___ Condenser ___ Settling Chamber ___ Thermal Incinerator ___ Flare ___ Other (Describe) ___ Wet Plate Electrostatic Precipitator ___ Dry Plate Electrostatic Precipitator
List the pollutants for which this device is intended to control and the capture and control efficiencies.
Pollutant Capture Efficiency Control Efficiency
SO3 100% 98%
Explain the characteristic design parameters of this control device (flow rates, pressure drops, number of bags, size, temperatures, etc.).
Is this device subject to the CAM requirements of 40 C.F.R. 64? ___ Yes _X_ No
If Yes, Complete ATTACHMENT H
If No, Provide justification. This control device is subject to the monitoring requirements of the MON. Emissions from this unit are below defined level for major source.
Describe the parameters monitored and/or methods used to indicate performance of this control device.
REDACTED COPY CLAIM OF CONFIDENTIALITY
Air Pollution Control Device Form (control_device.doc) Page 1 of 2
Revised – 01/31/07
Page __1___ of __1___
ATTACHMENT G - Air Pollution Control Device Form
Control device ID number: DMSCD04
List all emission units associated with this control device. DMS001
Manufacturer: Brinks
Model number:
Installation date:
2002
Type of Air Pollution Control Device: ___ Baghouse/Fabric Filter ___ Venturi Scrubber ___ Multiclone ___ Carbon Bed Adsorber __ Packed Tower Scrubber ___ Single Cyclone ___ Carbon Drum(s) ___ Other Wet Scrubber ___ Cyclone Bank ___ Catalytic Incinerator ___ Condenser ___ Settling Chamber ___ Thermal Incinerator ___ Flare _x__ Demister ___ Wet Plate Electrostatic Precipitator ___ Dry Plate Electrostatic Precipitator
List the pollutants for which this device is intended to control and the capture and control efficiencies.
Pollutant Capture Efficiency Control Efficiency
SO3 100 %
Explain the characteristic design parameters of this control device (flow rates, pressure drops, number of bags, size, temperatures, etc.).
Is this device subject to the CAM requirements of 40 C.F.R. 64? ___ Yes _X_ No
If Yes, Complete ATTACHMENT H
If No, Provide justification. This control device is subject to the monitoring requirements of the MON. Emissions from this unit are below defined level for major source.
Describe the parameters monitored and/or methods used to indicate performance of this control device.
REDACTED COPY CLAIM OF CONFIDENTIALITY
ATTACHMENT H
N/A
REDACTED COPY CLAIM OF CONFIDENTIALITY
Confidential Page 1 4/14/2016
Rationale for Confidentiality Claim
b. Information claimed confidential is not available to the general public. Within the company,Chemours has distributed technical information on a need-to-know basis and has used itsbusiness confidentiality policy to prevent inadvertent dissemination of information. Thispolicy includes:
Marking of business confidential documents, Limited distribution of documents, Shredding of confidential documents before disposal.
Employees are aware of the competitive nature of their business and are trained in guarding confidential information. Within Chemours, a corporate program – “PIP” (Proprietary Information Protection) – is used to raise awareness for handling and disclosure of confidential information, which is documented in, document number GS-10346, “Guidelines for Safe Guarding Chemours Company Documents and Information”.
c. Information revealing the process technology in this submittal is not reasonably obtainableby persons other than Chemours employees who need to know. To maintain theconfidentiality of such information, Chemours employees involved with confidentialinformation sign a confidentiality agreement as stipulated by Chemours Legal. Transmittalof confidential information is done by certified mail or is delivered in person by a Chemoursemployee.
d. There is no statute that has been reviewed that requires disclosure of information claimed tobe confidential.
e. Chemours claims business confidentiality protection for the information submitted sincedisclosure would allow competent engineers within a competitor’s company to determine themanner or process by which Chemours produces this product and would provide competitorsinformation without paying for technology or conducting research and developmentnecessary to obtain the technology.
REDACTED COPY CLAIM OF CONFIDENTIALITY
top related