barber wilsons catalog
Post on 26-Mar-2016
362 Views
Preview:
DESCRIPTION
TRANSCRIPT
By Appointment toHer Majesty Queen Elizabeth II
Manufacturer of Kitchen & Bathroom Taps & Mixers Barber Wilsons & Co. Ltd.
580_BarberWilson-broch-final:Layout 1 7/11/07 2:29 pm Page i1
Above: Picture from 1908 – the early years when Barber Wilsonscraftsmen were building the firms’ reputation for quality water
We will make, good, free ofcharge, by repair or at our optionby replacement any defectivegoods becoming evident within a period of 12 months ofpurchase and arising from defects which are attributable to us as manufacturers.
We cannot be held responsiblefor any costs incurred incorrecting installation relatedfaults and problems withelectroplated and polishedfinishes when our cleaninginstructions are not adhered to.
Continual improvement
Barber Wilsons & Co Limited isconstantly seeking ways to improve thespecifications, design and production ofits products and alterations take placecontinually. Whilst every effort is made toproduce up to date literature thisbrochure should not be regarded as aninfallible guide to current specifications.Please refer to our price list for our termsand conditions of sale. E & OE.
Guarantee
Barber Wilsons is the oldestindependent, family ownedcompany manufacturing waterfittings in the United Kingdom.For over a century we haveoffered classic style andoutstanding quality and ourexpertise and commitment haveensured our success. Today, weapply the same attention todetail, high standards ofworkmanship and passion inrecreating original BarberWilsons designs.
Our range of products is amongthe widest in the industry andeach fitting is reproduced usinga portfolio of drawings from theearly 19th century. Although theexternal appearance of BarberWilsons fittings have remainedunchanged, modern materialsand components havesignificantly enhanced theirconstruction and internalmechanisms. This remarkableblend of traditional craft andcontemporary manufacturemeans that our taps, showersand mixers offer unsurpassedquality and an elegant,authentic style.
Whether refurbishing a periodhome or constructing a modernresidence, interior designers andarchitects strive to achieve ablend of high performance andstyle. The classic appeal of atraditional Barber Wilsonsfitting perfectly recreates anauthentic period feel withoutauthentic period performance.Our unique bespokemanufacturing service offerscustom-built solutions for allbathroom and kitchenrefurbishments. We haveworked on some of the mostinteresting and challenging ArtDeco restoration projects as wellas one-off private commissions.
Barber Wilsons – for unrivalledquality, authentic style and over100 years of manufacturingexcellence.
Barwil /’ba:wil / (b.1905) a fitting partner for grand designs.The trade mark of Barber Wilsons & Co Ltd; world classsuppliers of taps, showers and mixers.
Hotel refurbishment contracts include
Dorchester HotelSavoy HotelConnaught HotelClaridges HotelWhite’s HotelRaffles Hotel, SingaporeHyatt Carlton HotelFour Seasons HotelRitz Hotel
Oldest independentincorporated companyremaining in the industry
580_BarberWilson-broch-final:Layout 1 7/11/07 2:29 pm Page i2
Most of the traditional fittingsshown in this brochure are fromthe 1890’s (GA) range whichhave the original exposed topworks, with traditional rubbertap washers.An alternative to this style is the Regent (R) range with “easy-clean” shrouded head parts. Thecode numbers for the Regentrange are the same as the 1890’srange but are prefixed with theletter ‘R’instead of ‘GA’.
For most Regent and GA styleswe can now supply ceramic discheadworks. Regent ceramic disc(RCD) and GA ceramic disc(GCD). These give traditionalstyling with state of the artceramic disc internals. RCD and GCD have three-quarterturn operation.
The Mastercraft (MC) range isbased on our original 1930’sdesign and incorporates a stylishArt Deco theme of hexagonalcapstans, shrouds and spouts.Again, the code numbers are the same as the 1890’s range but are prefixed with the letters ‘MC’ instead of ‘GA’.Mastercraft is not available with ceramic disc headworks.
Throughout this catalogue taps which are available with ceramic discs are labelled withthe suffix CD.
1
Traditional taps in six styles
1890’s (GA) 1890’s with
ceramic disc
(GCD)
Mastercraft (MC)Regent (R)
Regent with
china lever
handles
(RFC)
Regent with
ceramic disc
(RCD)
Barber Wilsons fittings aremade to comply with BS1010and BS5412. Many of ourfittings are sent for testing tothe WRc Evaluation &Testing Centre and, therefore,comply with the requirementsof the current water byelaws.In order to comply with thewater byelaws, all fittings
incorporating hand heldshowers have backflowprevention devices fitted. Sinkmixers with single flow nozzleshave listed single check valvesfitted upstream of both hotand cold water inlets.All finishes are electroplatedto the following BritishStandards: Chrome toBS1224, Inca to BS4292.
We recommend that all inca,nickel and chrome finishesare cleaned as follows:After use rinse clean and drywith a soft cloth. Do not usecream or chemical cleaners.By following this procedure,limescale should not form,any problems of this nature,however, should be referredto the suppliers.
We also supply fittings innatural polished brass. This isnot lacquered orelectroplated and will tarnishnaturally. To maintain thepolished finish metal polishshould be used.
Quality compliance Cleaning
580_BarberWilson-broch-final:Layout 1 7/11/07 2:29 pm Page 1
2
GA R GCD RCD
4300 • • • •4308 • • • •900 • • • •2134 • • • •3300 • • • •3308 • • • •
Bath fittings
4300 (GA shown)Bath/spray mixer for bathrim mounting.
4308As above but with unions for wall fixing.(Not illustrated). Incorporates single check valve.
4300
580_BarberWilson-broch-final:Layout 1 7/11/07 2:29 pm Page 2
900 (GA shown)3⁄4" globe tap for bath fixing.(Refer to byelaw 16(2) for check valve requirements).
2134 (GA shown)3⁄4" bath pillar tap with 4" nose.
3308 (GA shown)Bath filler with wall unions.
3300As above but for rim mounting.(Not illustrated).
3
Inca Brass Non-tarnish gold alloyelectro-plated on nickel base coat.
Chrome Chrome electro-plated on anickel base coat.
Nickel Nickel electro-plated.
Satin Satin version of standard finishes.
Polished Brass Hand polished brass,NOT lacquered – will tarnish.
Weathered Bronze New antique finish.Chrome Inca Brass Nickel
Choice of Finishes for all Barwil Fittings
900 2134
3308
580_BarberWilson-broch-final:Layout 1 7/11/07 2:29 pm Page 3
4
Concealed fittings
Concealed valves and diverternozzles have been designed for deck mounting to bath or surround. All concealed valves and divertersare in need of periodic maintenanceand suitable access should beprovided for this purpose.
3480SET (Regent shown)3⁄4" deck bath valves and nozzle to form bath filler.
3480DV3⁄4" deck valves. Singly or in pairs.
TT3480DN1" deck bath nozzle - 8 1⁄2" projection.
3484SET* (Regent shown)A four hole deck set comprisinghot and cold valves, diverter/nozzle, and pull up hand sprayincorporating single checkvalve PS28.*Low & high pressure versions available.
GA R GCD RCD
3480 • • • •3484 • • • •
3484SET
3480SET
580_BarberWilson-broch-final:Layout 1 7/11/07 2:29 pm Page 4
5
Exposed supply & waste assemblies
4310RT
These Barwil fittings arecomplete assemblies for use withfree-standing roll top baths.They incorporate bath/spraymixers or bath fillers in all styles. Customers’ differentrequirements can be achieved byutilising components from acomprehensive range of options.Installation of these fittingsshould only be undertaken by aqualified registered plumber.
4310RT (Regent shown)Bath/spray mixer with 50mmfloor standards, waste overflowand ‘P’ trap assembly withbracing kit.
4309RTAs 4310 but with 25mm floorstandards.
TT3400TBath waste overflow and ‘P’trap assembly with flange plateas used for 4309/4310.
4311RTAs 4310 but with separateoverflow assembly.
4312RTAs 4309 but with separateoverflow assembly.
TT3400EXPExposed bath waste andoverflow assembly as used for4311/4312.
TT3400DPExposed bath waste andoverflow.
Note: The above assemblies areavailable with bath fillers toreplace bath/spray mixers andare then designated3309 – 12.Bath/spray mixers incorporatesingle check valves.
Parts available separately:
PS5542mm trap complete with wasteplug and chain.
PS5642mm elbow (to take trapoutlet through floor).
PS5742mm x 300mm length of tube.
PS57AFlange plate for 42mmdiameter tube.
TT2"342550mm floor standards.
TT2"679Bracing kit to suit 50mm floor standards only.
4311RT
580_BarberWilson-broch-final:Layout 1 7/11/07 2:29 pm Page 5
6
Combined bath, tap & shower
4306 (GA shown)Bath/spray mixer with slider bar.Wall mounting. Incorporatessingle check valve (PS28) tocomply with water byelaws.
4305As above but for deckmounting.(Not illustrated).
Incorporates single check valve (PS28) to comply withwater byelaws.
TT28821BWSlider bar only.
TT3452SETConcealed bath/shower mixer.
TT3450WSWall stops single or pairs.
TT3450WNWall nozzle.
TT3450WDWall diverter.
TT3450 SET (As shown)Concealed bath filler, wallmounted (incorporates nozzlewith tee, fittings and a pair ofwall stops).
4302 (GA shown)Bath/shower mixer. Wall mounting.
4301As above but for deck mounting.(Not illustrated).
GA R GCD RCD
4301 • • • •4302 • • • •4305 • • • •4306 • • • •3450 • • • •3452 • • • •
It is essential that valves areinstalled giving full access forservicing purposes. A suitable faceplate is provided for finishing.Under no circumstance shouldvalves be “plastered in”. If practical,rear access should be provided.Failure to follow these instructions,could nullify any warranty and alsoany responsibility for damage totiled or decorative finishes. It isessential that pipe lines are flushedbefore fitting.
TT3452SET
4306
4302
TT3450SET
3450WS
580_BarberWilson-broch-final:Layout 1 7/11/07 2:29 pm Page 6
7
Showers – surface mounted
GA R GCD RCD
PS53BA • •
Whilst completely retaining aperiod appearance thesethermostatic mixers are suitable foruse with all modern water systems,including gas instantaneouscombination boilers.
Inlet Connections1. TT5600, 5700, 5702, 5704,6002, 6003, PS53 (Valve only).Threaded 1⁄2" BSP male elbows.
Or 2. TT5600CU, 5700CU,5702CU, 5704CU, 6002CU,6003CU, PS53CU (Valve only).15mm compression swivel elbowssuitable for copper set at 196mmcentres protruding from thefinished wall surface 19mm.Elbows can also be set in-line withwall surface for direct connectionto exposed 15mm supplies,finishing flange are not used inthis instance.
Note: Thermostatic showers valvesare W.R.C listed 0210040. Theycomply with the requirement ofByelaw 17 which states that singlecheck valves must be fitted to eachinlet of the fitting. These areincorporated in the inlet adaptors. TT6002, TT6003, TT5700 andTT5702 also comply as theyincorporate single check valves.Byelaws 29, 58 and 73 state thatthese fittings are to be so installedas to be readily accessible forexamination, repair, replacementor operation.
All Barwil thermostatic valves aredesigned and manufactured to theexact standards of the TMV 3Scheme and are factory preset to 43˚C maximum.
Note 2.
Note 1.
PS53BA
580_BarberWilson-broch-final:Layout 1 7/11/07 2:29 pm Page 7
GA R GCD&GA RCD&R
5700BA • • • •5702BA • • • •5704BA • • • •
Showers – surface mountedGA R GCD RCD
5700 • • • •
8
5700BA 5702BA 5704BA
5700BAThermostatic dual controlshower/bath filler.
5702BAThermostatic triple controlshower/bath filler with handsprayon wall mounted cradle.
5704BAThermostatic triple controlshower/bath filler with handspraymounted on slider/riser tube.
MASTERCRAFTVERSION AVAILABLE
580_BarberWilson-broch-final:Layout 1 7/11/07 2:29 pm Page 8
Shower control valves are availablein GA and Regent styles andceramic disc version of both. 1"filler control valve is only availablein GA and Regent styles but willcompliment whichever type isspecified for above.Valves are factory set to a maximumblend temperature of 43°C (110°F)– this can be re-set on site up to50°C (122°F) if required.
TT5600Thermostatic mixer with fixedoverhead shower. MC version also available.
5700Thermostatic mixer with fixedoverhead shower and separatevalve. Installation notes for 5702also apply to 5700.
9
TT5600 5700
MASTERCRAFTVERSION AVAILABLE
580_BarberWilson-broch-final:Layout 1 7/11/07 2:29 pm Page 9
Showers – surface mounted
10
GA R GCD RCD
5702 • • • •5704 • • • •
5702 (Regent shown)Thermostatic mixer with separatevalves to control overhead andhand shower on cradle.
5704 (Regent shown)Thermostatic mixer with separatevalves to control overhead andhand shower on slider.
5702 5704
MASTERCRAFTVERSION AVAILABLE
580_BarberWilson-broch-final:Layout 1 7/11/07 2:29 pm Page 10
11
6002Thermostatic mixer withhandspray and cradle.
6003Thermostatic mixer withhandspray and wall mountedslider bar.
6002
6003
MASTERCRAFTVERSION AVAILABLE
580_BarberWilson-broch-final:Layout 1 7/11/07 2:29 pm Page 11
Recessed thermostatic showers – mixing valves
12
PS53CRecessed thermostatic showermixer 229mm round wall plate.Order shower and spray options separately
PS53CSQRecessed thermostatic showermixer 200mm square wall plate.Order shower and spray options separately
It is essential that concealed valvesare installed giving full access forservicing or maintenance purposes.The recommended aperture for thisis 150 diameter and a suitable faceplate is provided for finishing.Under no circumstance shouldvalves be “plastered in” with tilingtaken up to the dial plate.If practical, rear access should beprovided. Failure to follow theseinstructions, could nullify anywarranty and also any responsibilityfor damage to tiled or decorativefinishes. It is essential that pipe linesare flushed before fitting.
PS53CSQ
PS53C
580_BarberWilson-broch-final:Layout 1 7/11/07 2:29 pm Page 12
13
PS53C2 & PS53C2-CDRecessed thermostatic showermixer on square plate with triplecontrol (flow to shower, spray orbath and temperature).
PS53C1 & PS53C1-CDRecessed thermostatic shower mixeron rectangular plate with dualcontrol (flow and temperature).
PS53C3 & PS53C3-CDRecessed thermostatic shower mixeron rectangular plate with quadruplecontrol (flow to shower, spray, bathand temperature).
PS53C1
PS53C2
PS53C3
MASTERCRAFTVERSION AVAILABLE
580_BarberWilson-broch-final:Layout 1 7/11/07 2:29 pm Page 13
Thermostatic showers
14
MCPS53Mastercraft styled thermostaticshower valve.
MC53CRecessed thermostaticshower mixer. Octagonalwall plate and lever.
MCPS53
MC53C
580_BarberWilson-broch-final:Layout 1 7/11/07 2:29 pm Page 14
15
6000 (GA shown)Manual shower mixer withhandspray and supporting cradle.Incorporates single check valve.
6001 (GA shown)Manual shower mixer withhandspray and wall mountedslider bar. Incorporates singlecheck valve PS28.
5300 (GA shown)Manual shower mixer withfixed riser.
GA R GCD RCD
5300 • • • •6000 • • • •6001 • • • •
6001
5300
6000
MASTERCRAFTVERSION AVAILABLE
580_BarberWilson-broch-final:Layout 1 7/11/07 2:29 pm Page 15
Shower accessories
16
PS73 Comprises standard 800mmstraight shower arm, back inletand 5" rose.For any variations please orderindividual components as set out below.
PS16 Comprises standard 171⁄2" showerarm, back inlet and 5" rose.For any variations please orderindividual components as set out below.
MCPS16 Comprises standard 171⁄2" shower arm, Mastercraft back inlet and 5" rose.For any variations please orderindividual components as set out below.
TT28821BW(PS03 handspray and flex order separately).
Components can be specified separately –
see spares in price list
Back inlets available:PS41 back inlet.MCPS41 Mastercraft style back inlet.
Shower arms available:PS29S 171⁄2" shower arm.PS29L 24" shower arm.PS80S 171⁄2" straight shower arm.PS80L 24" straight shower arm.
Roses available:PS10 5" diameter rose.PS44 8" diameter rose.PS45 10" diameter rose.PS46 12" diameter rose.
PS16
MCPS16
PS73
TT28821BW
580_BarberWilson-broch-final:Layout 1 7/11/07 2:29 pm Page 16
17
TT67 S/Kit for GA or R fittings
MC67 S/Kit for MastercraftfittingsDesigned to provide a handspraywith a flexible hose as an optionalattachment to a manual orthermostatic fixed overheadshower. Kit comprises handspray,cradle and two-way diverter.Can be added to 4301 and 4302fittings.
PS60Ball joint available for all showerarms at additional cost.
PS614" skirted rose. Recommended foruse with swivels.
TT3430Shower Tray Waste85 (33⁄8") dia. flange x 85 (33⁄8")tail (11⁄2" BSP)
TT61600Wall bracket and swivel connector,(PS03 handspray and flex orderseperately).
PS62
PS05
TT3430
PS61
PS50
TT61600
TT67S KIT
PS60
580_BarberWilson-broch-final:Layout 1 7/11/07 2:29 pm Page 17
18
GA R GCD RCD RFC
2123 • • • • •2124 • • • • •2125 • • • • •
2123
2124
2125
Basin taps
2124 (GA shown in weatheredbronze finish)1⁄2" basin taps with 4" nose.
2125 (GA shown)1⁄2" basin taps with 5" nosefor use with inset basins.
2123 (GA shown)1⁄2" basin taps with 3" nose.
580_BarberWilson-broch-final:Layout 1 7/11/07 2:29 pm Page 18
Basin mixers
19
6450 (GA shown)3-hole basin mixer with pop-upwaste, 115mm nozzle.
6454 (GA shown)Wall mounted nozzle with valves.Waste not included.
6453 (GA shown)3-hole basin mixer swovel swan-neck.
6455As above but 140mm nozzle.
6451, 6456With plug and chain waste andchain boss on nose.
6452, 6457With plug and chain waste andchain stay.
6459 (Regent shown)3-hole basin mixer with pop-upwaste and swan-neck filler.
GA R GCD RCD RFC
6450 • • • • •6451 • • • • •6452 • • • • •6453 • • • • •6454 • • • • •6455 • • • • •6456 • • • • •6457 • • • • •6459 • • • • •
6450
6454
6459
6453
580_BarberWilson-broch-final:Layout 1 7/11/07 2:29 pm Page 19
Basin mixers (continued)
20
6475 (GA shown)Monobloc basin mixer with pop-up waste.
6476With plug and chain waste andchain boss on nose.(Not illustrated).
6470 (GA shown)Monobloc basin mixer with pop-up waste.
6471With plug and chain waste andchain boss on nose.(Not illustrated).
GA R GCD RCD RFC
6470 • • • • • 6471 • • • • • 6475 • • • • • 6476 • • • • •
6470
6475
580_BarberWilson-broch-final:Layout 1 7/11/07 2:29 pm Page 20
21
GA R GCD RCD RFC
6008 • • • • •1870 • • • • •1875 • • • • •
1875
1870
6008
6008 (Regent shown)Hairdressers’ basin mixer withflexible hose and shampoo spray.The hand held spray is retractableand rests in a flush fittingindependent holder. Incorporatessingle check valve PS28.
1875 (GA shown)Monobloc bidet mixer for singlehole rim. With pop-up waste andadjustable nozzle.
1870 (GA shown)Monobloc bidet mixer for singlehole rim. With pop-up waste andadjustable nozzle.
Bidet fittings & basin handspray
580_BarberWilson-broch-final:Layout 1 7/11/07 2:29 pm Page 21
Mastercraft fittings
22
Barber Wilsons designed andmanufactured this classic range ofMastercraft fitting in the early1930’s when Art Décoratif (ArtDeco) was so in vogue. Theoriginal hexagonal designs withtheir distinctive facets are an idealway of achieving a bathroom styledin this manner. Their solidconstruction from modernmaterials ensures they are easy toinstall, maintain and use. Availablein chrome, nickel and inca finishes.Note: Mastercraft fittings are notavailable with ceramic diskheadworks.
MC3460Concealed bath mixer, mountedon panel.This fitting is supplied assembled (as shown)
and must not be removed from the plate
MC4300Bath/spray mixer, pillar mounting.MC4308Bath/spray mixer, wall mounting.(Not illustrated).
Incorporates single check valves.
MC4300
MC3460
580_BarberWilson-broch-final:Layout 1 7/11/07 2:29 pm Page 22
23
MC3300Bath filler, pillar mounting.
MC3308Bath filler, wall mounting.(Not illustrated).
MC21343⁄4" bath pillar taps.
MC2123 (Not illustrated)1⁄2" basin pillar taps.
MC3300
MC2134
580_BarberWilson-broch-final:Layout 1 7/11/07 2:29 pm Page 23
24
MC3470 SETConcealed bath filler, wallmounted. (incorporates nozzle withtee fittings and a pair of wall stops.
MC3490 SETBath filler deck mounted(incorporates nozzle with teefittings and a pair of deck valves.
MC3494 SETFour hole deck set comprising hotand cold deck valves, diverter/nozzleand a pull up hand spray. Comeswith tee, fittings and PS28 singlecheck valve.
NOTE: All recessed fittingsrequire periodic maintenance andsuitable access should be providedfor this purpose.
MC3470
MC3494set
Mastercraft fittings (continued)
MC3490set
580_BarberWilson-broch-final:Layout 1 7/11/07 2:29 pm Page 24
25
Mastercraft basin & bidet fittings
MC6470Monobloc basin mixer with pop-up waste.
MC64503-hole basin mixer withpop-up waste 112mm nozzle.
MC6455As above but with 140mm nozzle.
MC1870Monobloc bidet mixer with pop-up waste.
MC1870
MC6470
MC6450
580_BarberWilson-broch-final:Layout 1 7/11/07 2:29 pm Page 25
26
Kitchen fittings
2020 (GA shown)Wall mounted sink mixer.
1070 (RFC shown)Monobloc single hole sink mixer.Quarter turn china lever handlesand swivel nozzle.
1010 (Regent shown)1⁄2" pillar sink mixer with swivel nozzle.NB. Mixers have single flownozzles fitted with an aerator.Single check valves areincorporated in the hot and coldinlets to comply with waterbyelaw 25.IRN 101.
2010 (Not illustrated)Wall mounted, concealed supplies.1⁄2" pillar sink mixer with swivel nozzle.NB. Mixers have single flownozzles fitted with an aerator.Single check valves areincorporated in the hot and coldinlets to comply with waterbyelaw 25.IRN 101.
2015 (Not illustrated)Wall mounted, exposed supplies.1⁄2" pillar sink mixer with swivel nozzle.NB. Mixers have single flownozzles fitted with an aerator.Single check valves areincorporated in the hot and coldinlets to comply with waterbyelaw 25.IRN 101.
GA R GCD RCD RFC GFC
1010 • • • • • • 1070 • • • • • • 2010 • • • • • • 2015 • • • • • • 2020 • • • • •
1010
10702020
580_BarberWilson-broch-final:Layout 1 7/11/07 2:29 pm Page 26
27
1040 (GA shown)Sink mixer with flexible hose sprayfor rinsing items beforedishwashing. The hand held sprayis retractable and rests in a flushfitting independent holder.
1030 (Only available RFC)Mixer and handspray for fittinginto work surface at a fixed centreof 203mm. Handspray can belocated in a suitable position close by.
NB.Handspray operation interupts theflow through the nozzle at thesame temperature.Patent No. GB 2361047US Patent No. 6341617
NOTE: The handspray used onthe 1030 and 1040 mixers mustnot be used on any other BarberWilsons models, or independently.
GA R GCD RCD RFC
1030 •1040 • • • • •
1030
1040
580_BarberWilson-broch-final:Layout 1 7/11/07 2:29 pm Page 27
28
Kitchen sink fittings
260 (RFC shown)1⁄2" bib tap with quarter turn chinalever handle.
106 (GA shown)1⁄2" pillar sink tap, withraised nozzle.
GA260 (GA shown)1⁄2" sink bib tap, shown withTT282 back plate forexposed supply.
260 (GA shown)1⁄2" sink bib tap, with TT2806" standard and TT284 extension(1", 2", 3" or 4").
GA R GCD RCD RFC
106 • • • • • 260 • • • • •
106
RFC260
GA260 GA260
580_BarberWilson-broch-final:Layout 1 7/11/07 2:29 pm Page 28
29
MC3420/15
TT3420/15
TT3400
MC3400
TT3410
TT3408W
TT3435
TT3420/15Cistern lever handle with 150mm shank.
TT3420/25As above with a 250mm shank.
TT3420/35As above but with 350mmshank for concealed cisterns.
MC3420/15Cistern lever handle with 150mm shank.
MC3420/25As above with a 250mm shank.
MC3420/35As above but with 350mmshank for concealed cisterns.
TT3400Bath waste, plug, chain andoverflow set. 72mm (27⁄8") dia.flange x 72mm (27⁄8") tail (11⁄2" BSP)
TT3408WBath pop-up waste, and overflow set.
TT3410Basin waste with brass plugand chain. 60mm (23⁄8") dia.flange x 85mm (33⁄8")tail (11⁄4" BSP)
TT3435Slotted sink waste.85mm (33⁄8") dia. flange x85mm (33⁄8") tail (11⁄2" BSP)
MC3400Bath waste, plug, chain andoverflow set.
Accessories
580_BarberWilson-broch-final:Layout 1 7/11/07 2:29 pm Page 29
UK Barber Wilsons & Co LtdCrawley Road, Wood Green,London N22 6AHTel +44 (0)208 888 3461Fax +44 (0)208 888 2041Email sales@barwil.co.ukwww.barwil.co.ukwww.barberwilsons.com
USA/Canada Barber Wilsons North AmericaPO Box 1236, Roanoke Avenue,Riverhead, New York 11901USATel ++1 800 727 6317Fax ++1 800 217 5578Email sjenkinson@barwil.co.uk
Distributors
UK A.W. Andes Bathrooms LtdAtlas House, Stratton Business ParkMontgomery Way, BiggleswadeBeds SG18 8USTel +44 (0)8453 909 090Fax +44 (0)8453 909 091
Belgium Van Marcke NVWeggevoerdenlaan, 5-8500 KortrijkTel ++32 (0)56 237 511 Fax ++32 (0)56 201 478
07
580_BarberWilson-broch-final:Layout 1 7/11/07 2:29 pm Page 32
top related