ball valve stainless steel with pneumatic actuator … fon: +49 711/550788-40 index: 10/2015...
Post on 10-May-2018
217 Views
Preview:
TRANSCRIPT
Datasheet
Fon: +49 711/550788-40 Index: 10/2015 info@nieruf.com www.nieruf.com
Ball valve stainless steel with pneumatic actuator type PK02
Description:
Two-piece stainless steel ball valve, made of stainless steel, with pneumatic actuator. Chrome plated brass ball to shut off pipeline systems.
Features:
- suitable for neutral and not neutral gaseous & liquid media
- free of silicone - no bracket and no coupler essential,
pneumatic actuator will be mounted directly on the ball valve
- suitable for mounting of switch box from DAD42.1
Connection: Construction: Pressure:1/2“, 3/4“, 1“, 1 1/4“, 1 1/2“, 2“, Inch Two-piece ball valve 0 – 40 bar – depending on design
Design: Two-piece ball valve with pneumatic actuator Body: Stainless steel 1.4408 Ball: Stainless steel 1.4408 Ball sealing:
PTFE Stem: Stainless steel 1.4401 Stem sealing: PTFE/Viton Temperature: generally -20°C to +180°C (depending on working pressure) Body actuator: Aluminium hard anodized Shaft: Steel nickel plated Piston: Aluminium Seals: Perbunan Temperature: -20°C to +90°C Control pressure: min. 6 bar up to 10 bar Operating media: Filtered air acc. to Pneurop / ISO class 4
Remarks:
- Suitable for industrial purposes - The dimension of the device is calculated with a control pressure rate from 6 bar to 10 bar - Ball valves with DAD32.1 are available with DAD42.1 - For non-greasing mediums (e. g. water) or/and long non-working time it might be necessary
to choose a bigger actuator size. In this case please contact our technical staff
Datasheet
Fon: +49 711/550788-40 Index: 10/2015 info@nieruf.com www.nieruf.com
Dimensions:
Mode of function: DAD = double acting DN PN D1 I L H h A C d SW R Flange DAD ISO 7/1 +/- 2 +/- 2 ISO 5211 actuator
15 40 Rp 1/2“ 14,5 75 123,5 30 150 60 12 10 G 1/8“ F03 42.1 20 40 Rp 3/4“ 16,5 80 127,0 30 150 60 12 10 G 1/8“ F03 42.1 25 40 Rp 1“ 18,5 90 140,5 30 150 60 12 10 G 1/8“ F05 42.1
361 32 40 Rp 1 1/4“ 23,5 110 172,5 30 180 81,5 16 13 G 1/8“ F05 63.1 40 40 Rp 1 1/2“ 24,5 120 183,0 30 180 81,5 16 13 G 1/8“ F05 63.1 50 40 Rp 2“ 26,5 140 191,0 30 180 81,5 16 13 G 1/8“ F05 63.1 Mode of function: DAE = single acting (spring closing) DN LW PN D l L H h A C Ød SW R Flange DAE bar ISO 7/1 +/-2 DIN ISO 5211
15 16 40 Rp 1/2“ 14,5 75 123,5 30 150 60 12 10 G 1/8
F03 42.1-2F 20 20 40 Rp 3/4“ 16,5 80 127,0 30 150 60 12 10 G
1/8 F03 42.1-2F
25 25 40 Rp 1“ 18,5 90 166,5 30 180 81,5 13 10 G 1/8
F05 63.1-10F 32 32 40 Rp 1 1/4“ 23,5 110 172,5 30 180 81,5 13 10 G
1/8 F05 63.1-10F
40 38 40 Rp 1 1/2“ 24,5 120 183,0 30 180 81,5 13 10 G 1/8
F05 63.1-10F 50 50 40 Rp 2“ 26,5 140 191,0 30 180 81,5 13 14 G
1/8 F05 63.1-10F
Datasheet
Fon: +49 711/550788-40 Index: 10/2015 info@nieruf.com www.nieruf.com
Article number:Type Version Seal Size PK02
00 – double acting 01 – single acting
00 – PTFE 03 – 1/2“ 04 – 3/4“ 05 – 1“ 06 – 1 1/4“ 07 – 1 1/2“ 08 – 2“
Example no. PK02000005: PK02 00 00 05 Ball valve made of stainless steel with pneumatic actuator Version: double acting Seal: PTFE Size: 1“
NOTE:
Standard for single acting actuator is closing with spring force.
Image similar, subject change without notice.
top related