auxiliary graphics

Lecture 4 Tuesday, 06 May 2014 1

ENGINEERING GRAPHICS 1E9

Lecture 4: Auxiliary Views

«Un hombre debe buscar lo que es y no lo que cree

que debería ser..» Albert Einstein.

Lecture 4 Tuesday, 06 May 2014 2

Auxiliary View An auxiliary view is an orthographic view taken in such a manner that the lines of sight are not parallel to the principal projection planes (frontal, horizontal, or profile). There are an infinite number of possible auxiliary views of any given object.

Principal faces of the object are not parallel to PP planes.

Lecture 4 Tuesday, 06 May 2014 3

Why Auxiliary View?

• Inclined planes and oblique lines do not appear true length or true size in any of the principle planes of projection

• To determine the true length of an oblique line or the true size of an inclined plane, an auxiliary view must be created.

• The auxiliary view shows the true shape and size of circular shapes.

Lecture 4 Tuesday, 06 May 2014 4

Steps of Drawing

1. Select the face that is to be drawn as i) a true surface,

ii) a true length line,

iii) an end view of a line.

Lecture 4 Tuesday, 06 May 2014 5

Steps of Drawing

2. Draw construction lines perpendicular to the surface/line/point of interest. This line should go in a direction, and far enough that leaves enough space for the view.

Lecture 4 Tuesday, 06 May 2014 6

Steps of Drawing

3. Draw a folding line at an appropriate distance. This will act as a reference plane.

Lecture 4 Tuesday, 06 May 2014 7

Steps of Drawing

4. Transfer distances from another view (adjacent view). This view will typically be the view adjoining the view that the auxiliary is drawn from.

Lecture 4 Tuesday, 06 May 2014 8

Steps of Drawing

5. Complete the view. Draw visible and hidden lines as seen from the direction of projection lines.

Lecture 4 Tuesday, 06 May 2014 9

Example 2

1. Draw two orthographic views and assume a direction of sight for auxiliary view.

Lecture 4 Tuesday, 06 May 2014 10

Steps of Drawing

2. Draw construction lines parallel to the arrow.

Lecture 4 Tuesday, 06 May 2014 11

Steps of Drawing

3. Assume reference plane coinciding with back surface. Draw reference plane (edge view) in the top view and auxiliary view.

Lecture 4 Tuesday, 06 May 2014 12

Steps of Drawing

4. Draw auxiliary view of surface A. Transfer depth measurements from top view.

Lecture 4 Tuesday, 06 May 2014 13

Steps of Drawing

5. Complete the view by adding other visible edges and objects.

Lecture 4 Tuesday, 06 May 2014 14

Curved Object

Lecture 4 Tuesday, 06 May 2014 15

Classification of Auxiliary Views

• Auxiliary views are classified according to the principal dimension of the object shown in the view.

1. Depth/Front auxiliary view

2. Height/Top auxiliary view

3. Width/Side auxiliary view

Lecture 4 Tuesday, 06 May 2014 16

Depth Auxiliary View Any auxiliary view projected from the ‘elevation’ showing depth

of object

Elevation is the adjacent view, Plan and Side-View are alternative views

Direction of sight

Lecture 4 Tuesday, 06 May 2014 17

Height Auxiliary View Any auxiliary view projected from the plan showing height of

object

Plan is adjacent view, Side-View and Elevation are alternative views

Direction of sight

Lecture 4 Tuesday, 06 May 2014 18

Width Auxiliary View Any auxiliary view projected from the side-view showing width of

object

Side-View is adjacent view, Plan and Elevation are alternative views

Direction of sight

Lecture 4 Tuesday, 06 May 2014 19

Notes • An auxiliary view is an orthographic view taken on

planes other than principal projection (PP) planes (frontal, horizontal, or profile).

• Principal dimension shown in auxiliary view is not shown in the adjacent view from which auxiliary view is projected.

• A primary auxiliary view is projected on the plane perpendicular to one PP plane and inclined to other 2 PP planes.

• A secondary auxiliary view is projected from primary auxiliary views.

Lecture 4 Tuesday, 06 May 2014 20

Other Auxiliary Views

• Any auxiliary view projected from the primary auxiliary view is secondary auxiliary view

Lecture 4 Tuesday, 06 May 2014 21

Example

Lecture 4 Tuesday, 06 May 2014 22

Example

Lecture 4 Tuesday, 06 May 2014 23

Lecture 4 Tuesday, 06 May 2014 24

Lecture 4 Tuesday, 06 May 2014 25

Lecture 4 Tuesday, 06 May 2014 26

Lecture 4 Tuesday, 06 May 2014 27

TAREA:

OBTENER AL MENOS 5 VISTAS DE

LA PIRAMIDE HEXAGONAL. SE

PUEDE PINTAR CADA PLANO DE

UN COLOR DIFERENTE.

Lecture 4 Tuesday, 06 May 2014 28

Lecture 4 Tuesday, 06 May 2014 29

Lecture 4 Tuesday, 06 May 2014 30

Lecture 4 Tuesday, 06 May 2014 31