auto-climbing system acs50 & acs100 · 2017. 3. 8. · 1. set the formwork by wall-through...
Post on 28-Mar-2021
1 Views
Preview:
TRANSCRIPT
Auto-Climbing System ACS50 & ACS100
47
The power of the Auto-Climbing System is the hydraulic system which includes the oil cylinder and two commentators.The Commentators can control the climbing of climbing rail and the bracket.Cranes are not needed during the construction. It’s easy to operate highly efficient and safe.Auto-Climbing System is the best choice for the construction of high buildings and bridges.There are mainly two types of standard auto climbing brackets, ACS50 and ACS100. The systems high load capacity means that special requirements such as platform levels, integrating concrete placing booms, or sustaining concrete loads from overhangs can be realized in an economic way.
Auto-Climbing System ACS50 & ACS100Introduction
◇
◇
◇
◇
◇
◇
WALL FORMWORK SYSTEM
48
ACS50 Structure Sketch
Structures
ACS100 Structure Sketch
Auto-Climbing System ACS50 & ACS100
49
Accessories
64.63
36.80
274.22
05160100
05160200
05160400
Retrusive Set
Single Retrusive Set
Upright for Climbing Bracket
Remarks Weight(Kg) Item No. Spec. & tech. parameter
Remarks Weight(Kg) Item No. Spec. & tech. parameter
445.69
204.89
05160301
05160302
L=8000
L=6000
Climbing Rail Remarks Weight(Kg) Item No. Spec. & tech. parameter
Remarks Weight(Kg) Item No. Spec. & tech. parameter
WALL FORMWORK SYSTEM
50
88.40
54.58
116.53
58.04
127.05
05160600
05160700
05160800
05160900
05160500
Pull-push Prop for Vertical Waling
Wall-attached Support
Retrusive Set Assembly
Connecting Rod
Main Beam
Remarks Weight(Kg) Item No. Spec. & tech. parameter
Remarks Weight(Kg) Item No. Spec. & tech. parameter
Remarks Weight(Kg) Item No. Spec. & tech. parameter
Remarks Weight(Kg) Item No. Spec. & tech. parameter
Remarks Weight(Kg) Item No. Spec. & tech. parameter
Auto-Climbing System ACS50 & ACS100
51
46.08
37.31
40.44
32.92
05161100
05161200
05161300
05161400
Beam
Connecting Rod No.1
Connecting Rod No.2
Platform Beam
Remarks Weight(Kg) Item No. Spec. & tech. parameter
Remarks Weight(Kg) Item No. Spec. & tech. parameter
Remarks Weight(Kg) Item No. Spec. & tech. parameter
Remarks Weight(Kg) Item No. Spec. & tech. parameter
29.63 05161000
Upright Remarks Weight(Kg) Item No. Spec. & tech. parameter
WALL FORMWORK SYSTEM
52
17.76
127.67
108.16
05161700
05161500
05161600
Beam for Upper Platform
Vertical Waler No.1
Vertical Waler No.2
Remarks Weight(Kg) Item No. Spec. & tech. parameter
Remarks Weight(Kg) Item No. Spec. & tech. parameter
Remarks Weight(Kg) Item No. Spec. & tech. parameter
6.16
32.85
05161800
05161900
H=1350
Upright for Platform
Aligning Strut
Remarks Weight(Kg) Item No. Spec. & tech. parameter
Remarks Weight(Kg) Item No. Spec. & tech. parameter
Auto-Climbing System ACS50 & ACS100
53
1.22
10.56
05162200
05162300
Safe Pin
Adjusting Seat
Remarks Weight(Kg) Item No. Spec. & tech. parameter
Remarks Weight(Kg) Item No. Spec. & tech. parameter
1.09
0.65
1.05
1.6
05162401
05162402
05162501
05162502
D26.5
D20
M36*90
M42*90
Anchor Plate
Tensile Bolt
Remarks Weight(Kg) Item No. Spec. & tech. parameter
Remarks Weight(Kg) Item No. Spec. & tech. parameter
5.13 05162100
Bearing Pin Remarks Weight(Kg) Item No. Spec. & tech. parameter
WALL FORMWORK SYSTEM
54
0.67
0.47
2.55
1.77
1.92
4.49
05162801
05162802
05162901
05162902
05162600
05162700
M42
M36
M42/D26.5
M36/D20
V-climbing cone Tool
V-climbing Cone
Waling-to-bracket Holder
Welded Adjusting Spindle
Remarks Weight(Kg) Item No. Spec. & tech. parameter
Remarks Weight(Kg) Item No. Spec. & tech. parameter
Remarks Weight(Kg) Item No. Spec. & tech. parameter
Remarks Weight(Kg) Item No. Spec. & tech. parameter
1.061.94
0216190102161902
D20/L=300Max. load:270kN D26.5/L=350Max. load:400kN
Other length can be supplied as required, the largest length is 12m, galvanized
Tie Rod Remarks Weight(Kg) Item No. Spec. & tech. parameter
Auto-Climbing System ACS50 & ACS100
55
1. Assemble climbing bracket, fix upright for main platform.
2. Fix board for main platform.
Assemble Process
WALL FORMWORK SYSTEM
56
3. Lift the brackets, hang them on the anchor shoes and insert the safe pins.
4. Connect vertical waling and pull-push prop with the formwork system, install operating platform.
5. Lift the formwork system and put them on the retrusive set, adjust the formwork.
Auto-Climbing System ACS50 & ACS100
57
1. Set the formwork by wall-through tie-rods and pull-push props, embed anchors and do the first concrete pouring.2. Remove the formwork after the first concreting and fix anchor shoes on the finished wall, lift the brackets and formwork, then install the middle platform, match the formwork and do the second concreting.3. Lift formwork and brackets to a higher floor; fix climbing rail, hydraulic system and suspended platform.4. Match the formwork to the right position and do the third concreting.5. Remove the formwork and fix anchor shoes on the finished wall, then climbing rails climb up.6. Brackets climb up to the right position.7. Match the formwork, do the concrete pouring, come into the standard climbing state.
Step 1
Standard Climbing Process
Sketches of Climbing Vertically
Step 1
Step 2
WALL FORMWORK SYSTEM
58
Step 3
Step 4
Step 5
Step 6
Step 7
Auto-Climbing System ACS50 & ACS100
59
Sketches of Climbing Slantwise
Step 1
Step 2 Step 3
WALL FORMWORK SYSTEM
60
Step 4 Step 5
Step 6 Step 7
Auto-Climbing System ACS50 & ACS100
61
Application
WALL FORMWORK SYSTEM
62
Auto-Climbing System ACS50 & ACS100
63
WALL FORMWORK SYSTEM
64
top related