architectural finish & fixture specifications v1.3
Post on 23-May-2022
6 Views
Preview:
TRANSCRIPT
ARCHITECTURAL FINISH & FIXTURE SPECIFICATIONSV1.3 | NOVEMBER 2016
November 2016 Tru by Hilton Page 1 of 8
Index by Item Type Architectural Finish & Fixture IndexProject Name: Tru by Hilton - V1.3 Prototypical Specs
Issue Dt Item Number Item Description Vendor
ACOUSTIC CEILING TILE11/22/16 ACT-01 Acoustic Ceiling Tile @ Game Zone, Lounge, and Breakfast Buffet11/22/16 ACT-02 Acoustic Ceiling Tile @ Lobby Corridor11/22/16 ACT-03-A Acoustic Ceiling Tile @ Guestroom Corridor (OPTION A)11/22/16 ACT-03-B Acoustic Ceiling Tile @ Guestroom Corridor, Fitness
& Employee Breakroom (OPTION B)BASE
11/22/16 B-01-A Vinyl Base @ Guestroom (OPTION A)11/22/16 B-01-B Vinyl Base @ Guestroom (OPTION B)11/22/16 B-02-A Tile Base @ Guest Bath and Public Restrooms (OPTION A) Required Vendor11/22/16 B-02-B Tile Base @ Guest Bath and Public Restrooms (OPTION B) Required Vendor11/22/16 B-03-A Vinyl Base @ Lobby, Corridors, Typical Elevator Lobbies, and Fitness Center
(OPTION A)11/22/16 B-03-B Vinyl Base @ Lobby, Corridors, Typical Elevator Lobbies, and Fitness Center
(OPTION B)11/22/16 B-04-A Tile Base @ Vestibule, 1st Floor Elevator Lobby, Breakroom, and Guest
Laundry (OPTION A)Required Vendor
11/22/16 B-04-B Tile Base @ Vestibule, 1st Floor Elevator Lobby, Breakroom, and Guest Laundry (OPTION B)
Required Vendor
11/22/16 B-04-C Tile Base @ Vestibule, 1st Floor Elevator Lobby, Breakroom, and Guest Laundry (OPTION C)
Required Vendor
11/22/16 B-05-A Vinyl Base @ Back of House & Stairwells (OPTION A)11/22/16 B-05-B Vinyl Base @ Back of House & Stairwells (OPTION B)11/22/16 B-07 Quarry Tile Base @ Food Prep and Food Storage Required Vendor11/22/16 B-08 Tile Cove Base @ Indoor Pool Required Vendor
CARPET11/22/16 C-01-A Carpet Tile @ Lobby (OPTION A) Required Vendor11/22/16 C-01-B Carpet Tile @ Lobby (OPTION B) Required Vendor11/22/16 C-01-C Carpet Tile @ Lobby (OPTION C) Required Vendor11/22/16 C-02-A Accent Carpet Tile @ Corridor (OPTION A) Required Vendor11/22/16 C-02-B Accent Carpet Tile @ Corridor (OPTION B) Required Vendor11/22/16 C-02-C Accent Carpet Tile @ Corridor (OPTION C) Required Vendor11/22/16 C-03-A Carpet Tile @ Corridor, Typical Elevator Lobbies & BOH (OPTION A) Required Vendor11/22/16 C-03-B Carpet Tile @ Corridor, Typical Elevator Lobbies & BOH (OPTION B) Required Vendor11/22/16 C-03-C Carpet Tile @ Corridor, Typical Elevator Lobbies & BOH (OPTION C) Required Vendor11/22/16 C-03-D Carpet Tile @ Corridor, Typical Elevator Lobbies & BOH (OPTION D) Required Vendor11/22/16 C-03-E Carpet Tile @ Corridor, Typical Elevator Lobbies & BOH (OPTION E) Required Vendor11/22/16 C-04-A Broadloom Carpet @ Stairwell (OPTION A) Required Vendor11/22/16 C-04-B Broadloom Carpet @ Stairwell (OPTION B) Required Vendor11/22/16 C-04-C Broadloom Carpet @ Stairwell (OPTION C) Required Vendor
CORNER GUARD11/22/16 CD-01 Corner Guards @ Guestroom11/22/16 CD-02 Corner Guards @ Lobby and Pantry
EXTERIOR WALL CLADDING11/22/16 EX-01 EIFS Wall Cladding A11/22/16 EX-02 EIFS Wall Cladding B
November 2016 Tru by Hilton Page 2 of 8
Index by Item Type Architectural Finish & Fixture IndexProject Name: Tru by Hilton - V1.3 Prototypical Specs
Issue Dt Item Number Item Description Vendor
EXTERIOR WALL CLADDING11/22/16 EX-03 EIFS Wall Cladding C11/22/16 EX-04 EIFS Wall Cladding D11/22/16 EX-05 EIFS Wall Cladding E11/22/16 EX-06 EIFS Wall Cladding F11/22/16 EX-07 Outdoor High Pressure Laminate Panel A11/22/16 EX-08 Outdoor High Pressure Laminate Panel B11/22/16 EX-09 Paint @ Exterior Stair Doors & Door Frames11/22/16 EX-10 EIFS Wall Cladding G
LIGHTING11/22/16 L-01 LED DownLight @ Lounge Area & Game Zone11/22/16 L-02 LED Recessed Downlight @ Breakfast Bar11/22/16 L-03 LED Recessed Downlight @ Entry, Lobby, Breakroom, Restrooms, Hydration
Station & Indoor Pool11/22/16 L-03.1 LED Recessed Downlight @ Fitness Center11/22/16 L-04-A Linear LED Fixture @ Lobby Entry (OPTION A)11/22/16 L-04-B Linear LED Fixture @ Lobby Entry (OPTION B)11/22/16 L-05 LED Surface Mounted Cylinderical Light Fixture @ Work Zone and Dining11/22/16 L-06 DELETED11/22/16 L-07 DELETED11/22/16 L-08 Linear LED Wall Grazer @ Game Zone11/22/16 L-09-A Track Lighting System @ Command Center Soffit (OPTION A)11/22/16 L-09-B Track Lighting @ Command Center (OPTION B)11/22/16 L-10 LED Surface Mounted Downlight @ 2nd Exterior Entry11/22/16 L-11-A LED Lay-In Troffer Fixture @ Back of House (OPTION A)11/22/16 L-11-B LED Lay-In Troffer Fixture @ Back of House (OPTION B)11/22/16 L-12 LED Striplight, Accessories and Power Supply11/22/16 L-13-A LED Surface Mounted General Lighting @ Back of House (OPTION A)11/22/16 L-13-B LED Surface Mounted General Lighting @ Back of House (OPTION B)11/22/16 L-14-A Linear LED Fixture @ Corridor (OPTION A)11/22/16 L-14-B Linear LED Fixture @ Corridor (OPTION B)11/22/16 L-15 LED Recessed Downlight @ Guest Bath Shower11/22/16 L-16 LED Recessed Gimbal @ Guestroom Soffit & Guest Bath11/22/16 L-17 LED Recessed Gimbal @ Guestroom Landing Zone11/22/16 L-18 Cove Lighting @ Indoor Pool11/22/16 L-19 Downlight @ Façade Recesses11/22/16 L-20 In-Ground Uplight @ Façade Recesses11/22/16 L-21 Large Round Exterior Lighting @ Entry Canopy11/22/16 L-22 Small Round Exterior Lighting @ Entry Canopy11/22/16 L-23 Surface Mount Lighting @ Stairwells11/22/16 L-24 Featured Track Lighting @ Lobby Breakfast and Market11/22/16 L-25 LED Beam Light @ Breakfast Buffet
LIGHTING - DECORATIVE11/22/16 BOH-300 Pendant Lighting @ Dining Table Required Vendor11/22/16 GR-300 Reading Lights @ Bedside Required Vendor11/22/16 GR-301 Pendant Light @ Side Chair Required Vendor
November 2016 Tru by Hilton Page 3 of 8
Index by Item Type Architectural Finish & Fixture IndexProject Name: Tru by Hilton - V1.3 Prototypical Specs
Issue Dt Item Number Item Description Vendor
LIGHTING - DECORATIVE11/22/16 GR-302 Table Lamp @ TV Ledge Required Vendor11/22/16 GR-303 Wall Sconce @ Full-Length Mirror Required Vendor11/22/16 OF-300 String Lights @ Pergola Required Vendor11/22/16 PA-300 Large Decorative Pendant @ Lounge Seating Required Vendor11/22/16 PA-300.1 DELETED Required Vendor11/22/16 PA-301 Small Decorative Pendant @Lounge Seating Required Vendor11/22/16 PA-302 DELETED Required Vendor11/22/16 PA-303 Pendant Light @ Banquette Bench and Work Zone Required Vendor11/22/16 PA-304 Pendant Light @ Paper Airplane Mobile Required Vendor11/22/16 PA-305 Linear Ceiling Mounted Lights @ Corridor Required Vendor11/22/16 PA-306 Ceiling Mounted Lights (Large) @ Elevator Lobby and Command Center Required Vendor11/22/16 PA-307 Ceiling Mounted Lights (Small) @ Elevator Lobby Required Vendor11/22/16 PA-308 Wall Sconce @ Public Restrooms Required Vendor
METAL11/22/16 M-01 Metal Powdercoat Finish @ Millwork & Trellis Jointery11/22/16 M-02 DELETED11/22/16 M-03 DELETED11/22/16 M-04 Metal Finish @ Elevator Doors, Walls, Ceiling, Skirting, and Handrails
MIRRORS11/22/16 MIR-01 Wall Mounted Mirror @ Fitness Center
MIRRORS - ILLUMINATED11/22/16 GR-600 Illuminated Mirror @ Guest Bath Required Vendor11/22/16 GR-602 Illuminated Mirror @ Accessible Guest Bath Required Vendor
PLUMBING FIXTURE11/22/16 PF-01-A Toilet @ Guest Bath & Public Restrooms (OPTION A) Required Vendor11/22/16 PF-01-B DELETED11/22/16 PF-01-C Toilet @ Guest Bath & Public Restrooms (OPTION C) Required Vendor11/22/16 PF-01-D Toilet @ Guest Bath & Public Restrooms (OPTION D) Required Vendor11/22/16 PF-02-A 34" x 48" Shower Pan @ Guest Bath (OPTION A) Required Vendor11/22/16 PF-02-B 34" x 48" Shower Pan @ Guest Bath (OPTION B) Required Vendor11/22/16 PF-02-C 34" x 48" Shower Pan @ Guest Bath (OPTION C) Required Vendor11/22/16 PF-02-D 34" x 48" Shower Pan @ Guest Bath (OPTION D) Required Vendor11/22/16 PF-03-A Sink Basin @ Guest Bath (OPTION A) Required Vendor11/22/16 PF-03-B Sink Basin @ Guest Bath (OPTION B) Required Vendor11/22/16 PF-04-A Sink Faucet @ Guest Bath (OPTION A) Required Vendor11/22/16 PF-04-B Sink Faucet @ Guest Bath (OPTION B) Required Vendor11/22/16 PF-04-C Sink Faucet @ Guest Bath (OPTION C) Required Vendor11/22/16 PF-04-D Sink Faucet @ Guest Bath (OPTION D) Required Vendor11/22/16 PF-05-A Shower Head @ Guest Bath (OPTION A) Required Vendor11/22/16 PF-05-B Shower Head @ Guest Bath (OPTION B) Required Vendor11/22/16 PF-05-C Shower Head @ Guest Bath (OPTION C) Required Vendor11/22/16 PF-05-D Shower Head @ Guest Bath (OPTION D) Required Vendor11/22/16 PF-06-A Shower Controls @ Guest Bath (OPTION A) Required Vendor11/22/16 PF-06-B Shower Controls @ Guest Bath (OPTION B) Required Vendor
November 2016 Tru by Hilton Page 4 of 8
Index by Item Type Architectural Finish & Fixture IndexProject Name: Tru by Hilton - V1.3 Prototypical Specs
Issue Dt Item Number Item Description Vendor
PLUMBING FIXTURE11/22/16 PF-06-C Shower Controls @ Guest Bath (OPTION C) Required Vendor11/22/16 PF-06-D Shower Controls @ Guest Bath (OPTION D) Required Vendor11/22/16 PF-07-A Sink Basin @ Employee Breakroom (OPTION A) Required Vendor11/22/16 PF-07-B Sink Basin @ Employee Breakroom (OPTION B) Required Vendor11/22/16 PF-08-A Sink Faucet @ Employee Breakroom (OPTION A) Required Vendor11/22/16 PF-08-B Sink Faucet @ Employee Breakroom (OPTION B) Required Vendor11/22/16 PF-08-C Sink Faucet @ Employee Breakroom (OPTION C) Required Vendor11/22/16 PF-09-A Hand Shower and Diverter Control Combo @ Accessible Guest Bath Roll-in
Shower (OPTION A)Required Vendor
11/22/16 PF-09-B Hand Shower and Diverter Control Combo @ Accessible Guest Bath Roll-in Shower (OPTION B)
Required Vendor
11/22/16 PF-09-C Hand Shower and Diverter Control Combo @ Accessible Guest Bath Roll-in Shower (OPTION C)
Required Vendor
11/22/16 PF-09-D Hand Shower and Diverter Control Combo @ Accessible Guest Bath Roll-in Shower (OPTION D)
Required Vendor
11/22/16 PF-10-A Tub @ Accessible Guest Bath (OPTION A) Required Vendor11/22/16 PF-10-B Tub @ Accessible Guest Bath (OPTION B) Required Vendor11/22/16 PF-11-A Hand Shower and Tub Combo @ Accessible Guest Bath (OPTION A) Required Vendor11/22/16 PF-11-B Hand Shower and Tub Combo @ Accessible Guest Bath (OPTION B) Required Vendor11/22/16 PF-11-C Hand Shower and Tub Combo @ Accessible Guest Bath (OPTION C) Required Vendor11/22/16 PF-11-D Hand Shower and Tub Combo @ Accessible Guest Bath (OPTION D) Required Vendor11/22/16 PF-12-A Sink Basin @ Public Restroom (OPTION A) Required Vendor11/22/16 PF-13-A Sink Faucet @ Public Restroom (OPTION A) Required Vendor11/22/16 PF-13-B Sink Faucet @ Public Restroom (OPTION B) Required Vendor11/22/16 PF-13-C Sink Faucet @ Public Restroom (OPTION C) Required Vendor11/22/16 PF-13-D Sink Faucet @ Public Restroom (OPTION D) Required Vendor11/22/16 PF-14-A Toilet @ Public Restrooms (OPTION A) Required Vendor11/22/16 PF-14-B Toilet @ Public Restrooms (OPTION B) Required Vendor11/22/16 PF-14-C Toilet @ Public Restrooms (OPTION C) Required Vendor
PLASTIC LAMINATE11/22/16 PL-01 Plastic Laminate @ Command Center, Lobby Millwork, and Employee
BreakroomRequired Vendor
11/22/16 PL-02 Accent Plastic Laminate @ Market and Public Space Millwork Required Vendor11/22/16 PL-03 Plastic Laminate @ Back Cabinets of Command Center Required Vendor11/22/16 PL-04 Plastic Laminate @ Public Space Millwork & Employee Breakroom Millwork Required Vendor
11/22/16 PL-05 DELETED11/22/16 PL-06 DELETED11/22/16 PL-07 Accent Plastic Laminate C @ Employee Breakroom, Fitness & Pool Millwork Required Vendor
11/22/16 PL-08 Accent Plastic Laminate D @ Employee Breakroom, Fitness & Pool Millwork Required Vendor
11/22/16 PL-09 Accent Plastic Laminate E @ Employee Breakroom, Fitness & Pool Millwork Required Vendor
11/22/16 PL-10 Plastic Laminate @ Guestroom Window Sill Required Vendor11/22/16 PL-11 Plastic Laminate @ Hydration Station Shelving, Market Dividers, and Guest
Laundry Folding TableRequired Vendor
11/22/16 PL-12 Accent Plastic Laminate @ Hydration Station Millwork Required Vendor
November 2016 Tru by Hilton Page 5 of 8
Index by Item Type Architectural Finish & Fixture IndexProject Name: Tru by Hilton - V1.3 Prototypical Specs
Issue Dt Item Number Item Description Vendor
PLASTIC LAMINATE11/22/16 PL-13 DELETED Required Vendor
PAINT11/22/16 PT-01 Ceiling Paint @ Guestroom11/22/16 PT-02 Ceiling Paint @ Guest Bath11/22/16 PT-03 Paint @ Guestroom Doors, Door Frames, Grilles, Corridor Doors and Door
Frames11/22/16 PT-04 Overall Paint @ Fitness Center, Employee Breakroom, and Back of House
11/22/16 PT-05 Paint @ Window Soffit and Ceiling11/22/16 PT-06 Ceiling Paint @ Lobby and Fitness Center11/22/16 PT-07 Accent Ceiling Paint @ Lobby Corridor11/22/16 PT-08 Paint @ Command Center Soffit11/22/16 PT-09 Accent Ceiling Paint @ Command Center Soffit11/22/16 PT-10 Paint @ Command Center Columns11/22/16 PT-11 Accent Paint A @ Work Zone, Employee Breakroom, and Fitness Center
11/22/16 PT-12 Paint @ Lobby Column, Soffits, and Vestibule11/22/16 PT-13 Paint @ Public Space and B.O.H. Doors, Door Frames, and Grilles
11/22/16 PT-14 Accent Paint B @ Employee Breakroom11/22/16 PT-15 Paint @ Lobby Soffit Grilles11/22/16 PT-16 Paint @ Window Ceiling Grilles11/22/16 PT-17 Ceiling Paint @ Indoor Pool11/22/16 PT-18 Accent Ceiling Paint @ Indoor Pool11/22/16 PT-19 Paint @ Indoor Pool11/22/16 PT-20 Accent Paint @ Indoor Pool11/22/16 PT-21 Accent Paint @ Corridor Doors and Door Frames11/22/16 PT-22 DELETED11/22/16 PT-23 Ceiling Paint A @ Elevator Lobby (Floors 1 & 3)11/22/16 PT-24 Ceiling Paint B @ Elevator Lobby (Floors 2 & 4)11/22/16 PT-25 Ceiling Paint @ Breakfast, Fitness Millwork Area, Typical Guestroom
Corridors, and Back of House11/22/16 PT-26 Ceiling Paint @ Public Restrooms11/22/16 PT-27 Accent Paint @ Indoor Pool11/22/16 PT-28 Accent Paint @ Indoor Pool Focal Wall11/22/16 PT-29-A Ceiling Paint @ Landing Zone (Light Flooring Package)11/22/16 PT-29-B Ceiling Paint @ Landing Zone (Dark Flooring Package)11/22/16 PT-30 Paint @ Media Wall Millwork and Emplyee Breakroom Millwork
RUBBER11/22/16 R-01 Rubber Flooring @ Fitness Center Required Vendor11/22/16 R-02 DELETED
SPECIAL PAINT11/22/16 SF-01 Wrapped Panel Fabric @ Fitness Center
SPECIAL PAINT11/22/16 SPA-01 Knockdown Finish @ Guestroom11/22/16 SPA-02-A Accent Knockdown Finish @ Guestroom Headboard Wall (PACKAGE A)
November 2016 Tru by Hilton Page 6 of 8
Index by Item Type Architectural Finish & Fixture IndexProject Name: Tru by Hilton - V1.3 Prototypical Specs
Issue Dt Item Number Item Description Vendor
SPECIAL PAINT11/22/16 SPA-02-B Accent Knockdown Finish @ Guestroom Headboard Wall (PACKAGE B)11/22/16 SPA-02-C Accent Knockdown Finish @ Guestroom Headboard Wall (PACKAGE C)
SPECIALTY TILE11/22/16 SPT-01 Static Dissipative Tile @ PBX
SOLID SURFACING11/22/16 SS-01 DELETED
STONE11/22/16 ST-01 Quartz Countertop @ Command Center, Breakfast Buffet, and Employee
BreakroomTILE
11/22/16 T-01-A Floor Tile @ Guest Bath and Public Restrooms (OPTION A) Required Vendor11/22/16 T-01-B Floor Tile @ Guest Bath and Public Restrooms (OPTION B) Required Vendor11/22/16 T-02-A Wall Tile @ Breakfast Buffet (OPTION A) Required Vendor11/22/16 T-02-B Wall Tile @ Breakfast Buffet (OPTION B) Required Vendor11/22/16 T-03 Wall Tile @ Public Restrooms Required Vendor11/22/16 T-04 Floor Tile @ ADA Roll- In Shower Required Vendor11/22/16 T-05-A Floor Tile @ Vestibule, 1st Flr Elev. Lobby, Elev. Cabs, Breakroom, and Guest
Laundry (OPTION A)Required Vendor
11/22/16 T-05-B Floor Tile @ Vestibule, 1st Flr Elev. Lobby, Elev. Cabs, Breakroom, and Guest Laundry (OPTION B)
Required Vendor
11/22/16 T-05-C Floor Tile @ Vestibule, 1st Flr Elev. Lobby, Elev. Cabs, Breakroom, and Guest Laundry (OPTION C)
Required Vendor
11/22/16 T-06 Quarry Tile @ Food Prep & Food Storage Required Vendor11/22/16 T-07 Floor Tile @ Indoor Pool Required Vendor11/22/16 T-08 Accent Floor Tile @ Patio Required Vendor11/22/16 T-09 Mosaic Accent Tile @ Pool Waterline Required Vendor11/22/16 T-10 Floor Tile A @ Outdoor Patio Required Vendor11/22/16 T-11 Floor Tile B @ Outdoor Patio Required Vendor11/22/16 T-13 Depth Marker Tile @ Pool Required Vendor
TOILET ACCESSORY11/22/16 TA-01-A Glass Shower Enclosure @ Guest Shower (OPTION A) Required Vendor11/22/16 TA-01-B Glass Shower Enclosure @ Guest Shower (OPTION B) Required Vendor11/22/16 TA-01-C Glass Shower Enclosure @ Guest Shower (OPTION C) Required Vendor11/22/16 TA-02-A Shower Surround @ Guest Bath (OPTION A) Required Vendor11/22/16 TA-02-B Shower Surround @ Guest Bath (OPTION B) Required Vendor11/22/16 TA-02-C Shower Surround @ Guest Bath (OPTION C) Required Vendor11/22/16 TA-03-A Dual Toilet Paper Holder @ Guest Bath (OPTION A) Required Vendor11/22/16 TA-03-B Dual Toilet Paper Holder @ Guest Bath (OPTION B) Required Vendor11/22/16 TA-04-A Footrest @ Guest Shower (OPTION A) Required Vendor11/22/16 TA-04-B Footrest @ Guest Shower (OPTION B) Required Vendor11/22/16 TA-04-C Footrest @ Guest Shower (OPTION C) Required Vendor11/22/16 TA-05-A DELETED11/22/16 TA-05-B DELETED11/22/16 TA-05-C DELETED11/22/16 TA-06-A Decorative Grab Bar @ Guest Bath Shower (OPTION A)
November 2016 Tru by Hilton Page 7 of 8
Index by Item Type Architectural Finish & Fixture IndexProject Name: Tru by Hilton - V1.3 Prototypical Specs
Issue Dt Item Number Item Description Vendor
TOILET ACCESSORY11/22/16 TA-06-B Decorative Grab Bar @ Guest Bath Shower (OPTION B)11/22/16 TA-06-C Decorative Grab Bar @ Guest Bath Shower (OPTION C)11/22/16 TA-06-D Decorative Grab Bar @ Guest Bath Shower (OPTION D)11/22/16 TA-07-A Paper Towel Dispenser @ Public Restroom (OPTION A)11/22/16 TA-08-A Toilet Paper Holder @ Public Restroom (OPTION A)11/22/16 TA-09-A Sanitary Dispenser @ Public Restroom (OPTION A)11/22/16 TA-10-A 18" Accessible Grab Bar (OPTION A)11/22/16 TA-10-B 18" Accessible Grab Bar (OPTION B)11/22/16 TA-10-C 18" Accessible Grab Bar (OPTION C)
11/22/16 TA-10-D 18" Accessible Grab Bar (OPTION D)11/22/16 TA-11-A 36" Accessible Grab Bar (OPTION A)11/22/16 TA-11-B 36" Accessible Grab Bar (OPTION B)11/22/16 TA-11-C 36" Accessible Grab Bar (OPTION C)11/22/16 TA-11-D 36" Accessible Grab Bar (OPTION D)11/22/16 TA-12-A 42" Accessible Grab Bar (OPTION A)11/22/16 TA-12-B 42" Accessible Grab Bar (OPTION B)11/22/16 TA-12-C 42" Accessible Grab Bar (OPTION C)11/22/16 TA-12-D 42" Accessible Grab Bar (OPTION D)11/22/16 TA-13-A 24" Accessible Grab Bar @ Guest Shower (OPTION A)11/22/16 TA-13-B 24" Accessible Grab Bar @ Guest Shower (OPTION B)11/22/16 TA-13-C 24" Accessible Grab Bar @ Guest Shower (OPTION C)11/22/16 TA-14-A 30" Accessible Grab Bar @ Guest Shower (OPTION A)11/22/16 TA-14-B 30" Accessible Grab Bar @ Guest Shower (OPTION B)11/22/16 TA-14-C 30" Accessible Grab Bar @ Guest Shower (OPTION C)11/22/16 TA-15-A 36" Accessible Grab Bar @ Guest Shower (OPTION A)11/22/16 TA-15-B 36" Accessible Grab Bar @ Guest Shower (OPTION B)11/22/16 TA-15-C 36" Accessible Grab Bar @ Guest Shower (OPTION C)11/22/16 TA-16-A Tub Surround @ Accessible Tubs (OPTION A) Required Vendor11/22/16 TA-16-B Tub Surround @ Accessible Tubs (OPTION B) Required Vendor11/22/16 TA-17-A Straight Shower Rod @ Accessible Roll-in Showers (OPTION A)11/22/16 TA-17-B Straight Shower Rod @ Accessible Roll-in Showers (OPTION B)11/22/16 TA-17-C Straight Shower Rod @ Accessible Roll-in Showers (OPTION C)11/22/16 TA-18-A Curved Shower Rod @ Accessible Tub (OPTION A)11/22/16 TA-18-B Curved Shower Rod @ Accessible Tub (OPTION B)11/22/16 TA-19-A Folding Shower Seat @ Accessible Roll-in Showers (OPTION A)11/22/16 TA-19-B Folding Shower Seat @ Accessible Roll-in Showers (OPTION B)11/22/16 TA-20-A Removable Seat @ Accessible Tub (OPTION A)11/22/16 TA-21 Baby Changing Station @ Public Restroom
VINYL COMPOSITION TILE11/22/16 VCT-01 Vinyl Composition Tile @ Housekeeping, Laundry, and Linen Storage
VINYL FLOORING11/22/16 VF-01-A Light Luxury Vinyl Tile @ Guestroom (OPTION A) Required Vendor11/22/16 VF-01-B Light Luxury Vinyl Tile @ Guestroom (OPTION B) Required Vendor11/22/16 VF-01-C Light Luxury Vinyl Tile @ Guestroom (OPTION C) Required Vendor
November 2016 Tru by Hilton Page 8 of 8
Index by Item Type Architectural Finish & Fixture IndexProject Name: Tru by Hilton - V1.3 Prototypical Specs
Issue Dt Item Number Item Description Vendor
VINYL FLOORING11/22/16 VF-02-A Dark Luxury Vinyl Tile @ Guestroom (OPTION A) Required Vendor11/22/16 VF-02-B Dark Luxury Vinyl Tile @ Guestroom (OPTION B) Required Vendor11/22/16 VF-02-C Dark Luxury Vinyl Tile @ Guestroom (OPTION C) Required Vendor11/22/16 VF-03-A Light Luxury Vinyl Tile @ Lobby (OPTION A) Required Vendor11/22/16 VF-03-B Light Luxury Vinyl Tile @ Lobby (OPTION B) Required Vendor11/22/16 VF-03-C Light Luxury Vinyl Tile @ Lobby (OPTION C) Required Vendor11/22/16 VF-04-A Medium Luxury Vinyl Tile @ Lobby (OPTION A) Required Vendor11/22/16 VF-04-B Medium Luxury Vinyl Tile @ Lobby (OPTION B) Required Vendor11/22/16 VF-04-C Medium Luxury Vinyl Tile @ Lobby (OPTION C) Required Vendor11/22/16 VF-05-A Dark Luxury Vinyl Tile @ Lobby (OPTION A) Required Vendor11/22/16 VF-05-B Dark Luxury Viny Tile @ Lobby (OPTION B) Required Vendor11/22/16 VF-05-C Dark Luxury Viny Tile @ Lobby (OPTION C) Required Vendor
WOOD11/22/16 WD-01 Wood Finish @ Lobby Trellis Post and Beams
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Acoustic Ceiling Tile @ Game Zone,
Lounge, and Breakfast Buffet
Item Number: ACT-01
Item Quantity:
Manufacturer: Hunter Douglas Specialty Product Source: Hunter Douglas Specialty Products
Revision(s):
Contact: Maureen Nelson
Phone: (720) 872-7831Fax:
Address: 11500 E. 53rd Ave. Suite DDenver CO 80239-
Address: 11500 E 53rd Ave. Suite DDenver CO 80239-
Contact: Maureen NelsonE-mail: maureen.nelson@hunterdouglas.comE-mail: maureen.nelson@hunterdouglas.comWeb: www.hunterdouglascontract.comWeb: www.hunterdouglascontract.com
Phone: (720) 872-7831Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Techstyle® E Lay-In SystemColor/Finish: Tech "E" WhiteSize/Dimensions: 24" W x 72" L x 1-1/8" Thick
Notes: LX-04 Edgline Perimeter Channel Trim system required for exposed ceiling perimeters.Trim Profile: LX-04 for Lay-In version of Techstyle CeilingsDimensions: 3/4" wide flange x 4.25" highFinish: Natural #7163
Grid at Panel Seams: 9/16" wide tee bar - white finish.
For standard wall perimeter, use Hunter Douglas WT-1 wall channel, Natural #7163.
Ceilings shall be suspened using aircraft cable where suspension is visable.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Installer must verify all quantities prior to ordering and installation.•Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Tru by Hilton
ACT-01Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Acoustic Ceiling Tile @ Lobby CorridorItem Number: ACT-02
Item Quantity:
Manufacturer: Hunter Douglas Specialty Product Source: Hunter Douglas Specialty Products
Revision(s):
Contact: Maureen Nelson
Phone: (720) 872-7831Fax:
Address: 11500 E. 53rd Ave. Suite DDenver CO 80239-
Address: 11500 E 53rd Ave. Suite DDenver CO 80239-
Contact: Maureen NelsonE-mail: maureen.nelson@hunterdouglas.comE-mail: maureen.nelson@hunterdouglas.comWeb: www.hunterdouglascontract.comWeb: www.hunterdouglascontract.com
Phone: (720) 872-7831Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Techstyle® E Lay-In SystemColor/Finish: Tech "E" WhiteSize/Dimensions: *48" W x 60" L x 1-1/8"Thick
Notes: *LX-04 Edgeline Perimeter Channel Trim system required for exposed perimeters of ceilings.Trim Profile: LX-04 for Lay-In version of Techstyle CeilingsDimensions: 3/4" wide flange x 4.25" highFinish: Natural #7163
For standard wall perimeter extrusion, use Hunter Douglas WT-1 wall channel, Natural #7163.
Size of ceiling tile dependant on location. Verify in field all site dimensions, and field cut as required.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Installer must verify all quantities prior to ordering and installation.•Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Tru by Hilton
ACT-02Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Acoustic Ceiling Tile @ Guestroom
Corridor (OPTION A)
Item Number: ACT-03-A
Item Quantity:
Manufacturer: Hunter Douglas Specialty Product Source: Hunter Douglas Specialty Products
Revision(s):
Contact: Maureen Nelson
Phone: (720) 872-7831Fax:
Address: 11500 E. 53rd Ave. Suite DDenver CO 80239-
Address: 11500 E 53rd Ave. Suite DDenver CO 80239-
Contact: Maureen NelsonE-mail: maureen.nelson@hunterdouglas.comE-mail: maureen.nelson@hunterdouglas.comWeb: www.hunterdouglascontract.comWeb: www.hunterdouglascontract.com
Phone: (720) 872-7831Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Techstyle® E Lay-In SystemColor/Finish: Tech "E" WhiteSize/Dimensions: 30"W x 60"L x 1-1/8"Thick
Notes: Use standard Hunter Douglas WT-1 extruded aluminum wall perimeter channel, White #1908.
Panels to be installed wall to wall by inserting one side into the wall channel and gently installing the opposite side from below. DO NOT CRUSH THE PANEL.
Cross Tee: To run full width of corridor at panel seams. 9/16" width, white finish.
Refer to architectual drawings for further information.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Installer must verify all quantities prior to ordering and installation.•Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Tru by Hilton
ACT-03-APage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Acoustic Ceiling Tile @ Guestroom
Corridor, Fitness & Employee Breakroom (OPTION B)
Item Number: ACT-03-B
Item Quantity:
Manufacturer: Armstrong Source: Armstrong Ceilings
Revision(s):
Contact: Monty L. Gilespie, Distribution Sales Manager
Phone: (888) 234-5464 ext. 8110
Fax: (513) 752-4743
Address: 2500 Columbia AvenueLancaster PA 17604- United States
Address:
Contact:E-mail: vlgillespie@armstrong.comE-mail:Web: http://www.armstrong.comWeb: www.armstrong.com
Phone: (717)397-0611
Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Ultima Square Lay-In/ 1901Color/Finish: White/ DuraBrite Fine TextureSize/Dimensions: 24"W x 24"D x 3/4"Thick
Notes: Use with Prelude 15/16" suspension system, White (WH)
Refer to architectural drawings for location.
System to be installed with full panels centered along corridor width.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Installer must verify all quantities prior to ordering and installation.•Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Tru by Hilton
ACT-03-BPage 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Vinyl Base @ Guestroom (OPTION A)Item Number: B-01-A
Item Quantity:
Manufacturer: Johnsonite Source: Johnsonite
Revision(s):
Contact: Scott Stertmeyer
Phone: (440) 534-8916Fax: (440) 543-8920
Address: 16910 Munn RoadChagrin Falls OH 44023-
Address: 16910 Munn RoadChagrin Falls OH 44023-
Contact: Scott StertmeyerE-mail: scott.stertmeyer@tarkett.comE-mail: scott.stertmeyer@tarkett.com
800# : (800) 899-8916 800#: (800) 899-8916
Web: www.johnsonite.comWeb: www.johnsonite.com
Phone: (440) 534-8916Fax: (440) 543-8920
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Reveal MillworkColor/Finish: 32 PebbleSize/Dimensions: 4.25" H x 0.25" D
Instructions:Must be of contract quality and suitable for commercial use.•Installer to follow all manufacturer's installation guidelines for surface preparation and installation.•Quantities to be verified by installer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Tru by Hilton
B-01-APage 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Vinyl Base @ Guestroom (OPTION B)Item Number: B-01-B
Item Quantity:
Manufacturer: Shaw Industries Source: Shaw Industries
Revision(s):
Contact: Nancy Dickinson
Phone: (513) 673-3600Fax:
Address: 185 South Industrial Blvd.Calhoun GA 30701-
Address: 185 South Industrial Blvd.Calhoun GA 30701-
Contact: Thomas GigliottiE-mail: nancy@dickinsoncontract.comE-mail: tom.gigliotti@shawinc.comWeb: www.shawcontractgroup.comWeb: www.shawcontractgroup.com
Phone: (215) 805-0767Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: 4.5" Detail Profile Base/ 150VSColor/Finish: Clay/ 00760Size/Dimensions: 4.5"H x 0.25"
Instructions:Must be of contract quality and suitable for commercial use.•Installer to follow all manufacturer's installation guidelines for surface preparation and installation.•Quantities to be verified by installer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Tru by Hilton
B-01-BPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Tile Base @ Guest Bath and Public
Restrooms (OPTION A)
Item Number: B-02-A
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Daltile- Nancy Burns
Revision(s):
Contact: Nancy Burns
Phone: (404) 661-7111Fax:
Address:
Address: 7834 C.F. Hawn FrwyDallas TX 75217-
Contact:E-mail: nancy.burns@daltile.comE-mail:Web: www.dal-tile.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Kimona Silk Colorbody Porcelain / S-43C9Color/Finish: Panda Black P327Size/Dimensions: 3"H x 12"W
Notes: Edge: Bullnose Grout: Mapei 1/8" Color: 10 Black
Instructions:Must be of contract quality and suitable for commercial use.•Grout to include clear matte sealer.•Installer to follow all manufacturer's installation guidelines for surface preparation and installation.•Quantities to be verified by installer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Tru by Hilton
B-02-APage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Tile Base @ Guest Bath and Public
Restrooms (OPTION B)
Item Number: B-02-B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Ceramic Technics Ltd.
Revision(s):
Contact: Leslie Weinberg
Phone: (770) 740-0050Fax: (770) 740-1199
Address:
Address: 1298 Old Alpharetta RoadAlpharetta GA 30005-
Contact:E-mail: lweinberg@ceramictechnics.comE-mail:Web: www.ceramictechnics.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Fusion Porcelain Fabrik Bullnose TrimColor/Finish: Midnight / Honed FinishSize/Dimensions: 3-1/4" x 12" x 11/32" Thick
Notes: Grout Mfg: MapeiGrout Color: 10 BlackGrout Size: 1/8"
Instructions:Must be of contract quality and suitable for commercial use.•Grout to include clear matte sealer.•Installer to follow all manufacturer's installation guidelines for surface preparation and installation.•Quantities to be verified by installer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Tru by Hilton
B-02-BPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Vinyl Base @ Lobby, Corridors, Typical
Elevator Lobbies, and Fitness Center (OPTION A)
Item Number: B-03-A
Item Quantity:
Manufacturer: Johnsonite Source: Johnsonite
Revision(s):
Contact: Scott Stertmeyer
Phone: (440) 534-8916Fax: (440) 543-8920
Address: 16910 Munn RoadChagrin Falls OH 44023-
Address: 16910 Munn RoadChagrin Falls OH 44023-
Contact: Scott StertmeyerE-mail: scott.stertmeyer@tarkett.comE-mail: scott.stertmeyer@tarkett.com
800# : (800) 899-8916 800#: (800) 899-8916
Web: www.johnsonite.comWeb: www.johnsonite.com
Phone: (440) 534-8916Fax: (440) 543-8920
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Reveal MillworkColor/Finish: 63 Burnt UmberSize/Dimensions: 4.25" H x 0.25" D
Instructions:Must be of contract quality and suitable for commercial use.•Installer to follow all manufacturer's installation guidelines for surface preparation and installation.•Quantities to be verified by installer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Tru by Hilton
B-03-APage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Vinyl Base @ Lobby, Corridors, Typical
Elevator Lobbies, and Fitness Center (OPTION B)
Item Number: B-03-B
Item Quantity:
Manufacturer: Shaw Industries Source: Shaw Industries
Revision(s):
Contact: Nancy Dickinson
Phone: (513) 673-3600Fax:
Address: 185 South Industrial Blvd.Calhoun GA 30701-
Address: 185 South Industrial Blvd.Calhoun GA 30701-
Contact: Thomas GigliottiE-mail: nancy@dickinsoncontract.comE-mail: tom.gigliotti@shawinc.comWeb: www.shawcontractgroup.comWeb: www.shawcontractgroup.com
Phone: (215) 805-0767Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: 150VS 4.5" Detail ProfileColor/Finish: 00066 CharcoalSize/Dimensions: 4.5" H x 0.25" D
Instructions:Must be of contract quality and suitable for commercial use.•Installer to follow all manufacturer's installation guidelines for surface preparation and installation.•Quantities to be verified by installer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Tru by Hilton
B-03-BPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Tile Base @ Vestibule, 1st Floor
Elevator Lobby, Breakroom, and Guest Laundry (OPTION A)
Item Number: B-04-A
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Daltile- Nancy Burns
Revision(s):
Contact: Nancy Burns
Phone: (404) 661-7111Fax:
Address:
Address: 7834 C.F. Hawn FrwyDallas TX 75217-
Contact:E-mail: nancy.burns@daltile.comE-mail:Web: www.dal-tile.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: ImagicaColor/Finish: Haze IG97/ UnpolishedSize/Dimensions: 3" x12"
Notes: Edge: Bullnose Grout: Mapei 1/8" Color: 02 Pewter
Instructions:Must be of contract quality and suitable for commercial use.•Installer to follow all manufacturer's installation guidelines for surface preparation and installation.•Quantities to be verified by installer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Tru by Hilton
B-04-APage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Tile Base @ Vestibule, 1st Floor
Elevator Lobby, Breakroom, and Guest Laundry (OPTION B)
Item Number: B-04-B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Ceramic Technics Ltd.
Revision(s):
Contact: Leslie Weinberg
Phone: (770) 740-0050Fax: (770) 740-1199
Address:
Address: 1298 Old Alpharetta RoadAlpharetta GA 30005-
Contact:E-mail: lweinberg@ceramictechnics.comE-mail:Web: www.ceramictechnics.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Fiorano USA TuscanyColor/Finish: BiancoSize/Dimensions: 3" x12"
Notes: Edge: Bullnose Grout: Mapei 1/8" Color: 02 Pewter
Instructions:Must be of contract quality and suitable for commercial use.•Installer to follow all manufacturer's installation guidelines for surface preparation and installation.•Quantities to be verified by installer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Tru by Hilton
B-04-BPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Tile Base @ Vestibule, 1st Floor
Elevator Lobby, Breakroom, and Guest Laundry (OPTION C)
Item Number: B-04-C
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Shaw Industries
Revision(s):
Contact: Nancy Dickinson
Phone: (513) 673-3600Fax:
Address:
Address: 185 South Industrial Blvd.Calhoun GA 30701-
Contact:E-mail: nancy@dickinsoncontract.comE-mail:Web: www.shawcontractgroup.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: CT014 Substance BullnoseColor/Finish: 04114 FogSize/Dimensions: 4" x12"
Notes: Edge: Bullnose Grout: Mapei 1/8" Color: 35 Navajo Brown
Instructions:Must be of contract quality and suitable for commercial use.•Installer to follow all manufacturer's installation guidelines for surface preparation and installation.•Quantities to be verified by installer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Tru by Hilton
B-04-CPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Vinyl Base @ Back of House &
Stairwells (OPTION A)
Item Number: B-05-A
Item Quantity:
Manufacturer: Johnsonite Source: Johnsonite
Revision(s):
Contact: Scott Stertmeyer
Phone: (440) 534-8916Fax: (440) 543-8920
Address: 16910 Munn RoadChagrin Falls OH 44023-
Address: 16910 Munn RoadChagrin Falls OH 44023-
Contact: Scott StertmeyerE-mail: scott.stertmeyer@tarkett.comE-mail: scott.stertmeyer@tarkett.com
800# : (800) 899-8916 800#: (800) 899-8916
Web: www.johnsonite.comWeb: www.johnsonite.com
Phone: (440) 534-8916Fax: (440) 543-8920
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Traditional 4" Vinyl BaseColor/Finish: DC-32-4 PebbleSize/Dimensions: 4"H x 0.45"D
Instructions:Must be of contract quality and suitable for commercial use.•Installer to follow all manufacturer's installation guidelines for surface preparation and installation.•Quantities to be verified by installer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Tru by Hilton
B-05-APage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Vinyl Base @ Back of House &
Stairwells (OPTION B)
Item Number: B-05-B
Item Quantity:
Manufacturer: Shaw Industries Source: Shaw Industries
Revision(s):
Contact: Nancy Dickinson
Phone: (513) 673-3600Fax:
Address: 185 South Industrial Blvd.Calhoun GA 30701-
Address: 185 South Industrial Blvd.Calhoun GA 30701-
Contact: Thomas GigliottiE-mail: nancy@dickinsoncontract.comE-mail: tom.gigliotti@shawinc.comWeb: www.shawcontractgroup.comWeb: www.shawcontractgroup.com
Phone: (215) 805-0767Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: 4" Cove Base/ 148VSColor/Finish: Clay/ 00760Size/Dimensions: 4"H x 0.125"D
Instructions:Must be of contract quality and suitable for commercial use.•Installer to follow all manufacturer's installation guidelines for surface preparation and installation.•Quantities to be verified by installer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Tru by Hilton
B-05-BPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Quarry Tile Base @ Food Prep and
Food Storage
Item Number: B-07
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Daltile- Nancy Burns
Revision(s):
Contact: Nancy Burns
Phone: (404) 661-7111Fax:
Address:
Address: 7834 C.F. Hawn FrwyDallas TX 75217-
Contact:E-mail: nancy.burns@daltile.comE-mail:Web: www.dal-tile.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Quarry Tile/ Q-3565Color/Finish: Arid Gray 0Q42/ Abrasive GrainSize/Dimensions: 5" x 6"
Notes: Edge: Cove BaseGrout Mfg: MapeiGrout Color: 04 Bahama BeigeGrout Size: 1/8"
Instructions:Must be of contract quality and suitable for commercial use.•Grout to include clear matte sealer.•Installer to follow all manufacturer's installation guidelines for surface preparation and installation.•Quantities to be verified by installer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Tru by Hilton
B-07Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Tile Cove Base @ Indoor PoolItem Number: B-08
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Daltile- Nancy Burns
Revision(s):
Contact: Nancy Burns
Phone: (404) 661-7111Fax:
Address:
Address: 7834 C.F. Hawn FrwyDallas TX 75217-
Contact:E-mail: nancy.burns@daltile.comE-mail:Web: www.dal-tile.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Exhibition / EX-04 / S-36C9TColor/Finish: Dark Grey / Textured Cove BaseSize/Dimensions: 6"H x 12"W
Notes: Edge: Cove BaseCorner: Cove Base Corner #SC-36C9TGrout: Mapei 1/8" Color: 47 Charcoal
Instructions:Must be of contract quality and suitable for commercial use.•Grout to include clear matte sealer.•Installer to follow all manufacturer's installation guidelines for surface preparation and installation.•Quantities to be verified by installer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Tru by Hilton
B-08Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Carpet Tile @ Lobby (OPTION A)Item Number: C-01-A
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Patcraft Commercial Flooring
Revision(s):
Contact: Theresa Schneider
Phone:Fax:
Address:
Address: P.O Box 1527Dalton GA 30722-1527
Contact:E-mail: theresa.schneider@patcraft.comE-mail:
800#: (800) 713-6697
Web: www.patcraft.comWeb:
Mobile: (513) 805-1070Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Color: *590 Trendy TweedWidth or Rug Size: *18" x 36"
Weight: *21.0 ozContent: *Eco Solution NylonType: *Multi-level pattern loop
Primary Backing: *Non- Woven SyntheticSecondary Backing: *Ecoworx® TilePile Height *3/32" low - 6/32" highGauge: *1/12Stitches Per Inch: *10.0
Installation Method: *See Notes
Style Name: *Check In Plank Tile
Dye Method: *100% Solution Dyed
Notes: *Size of carpet tile dependant on approved layout.
Refer to seaming diagram / plan-o-gram provided by manufacturer for installation pattern and method.
Carpet Tile May be cut depending on Plan-O-Gram layout.
Flame Requirements: *ASTM-E-648 Class 1
Style Number: *42HVM
Instructions:Installer to provide all materials and equipment for complete installation, seaming diagrams, and full carpet layouts for all areas.
•
Tru by Hilton
C-01-APage 1
13Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Carpet Tile @ Lobby (OPTION A)Item Number: C-01-A
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Patcraft Commercial FlooringInstructions:
Supplied items and installation methods must be of contract quality and suitable for commercial use.•All quantities to be verified by installer.•Must meet or exceed all Fire Hazard/Flammability codes. If applicable codes do not address carpet and pad it must at minimum meet NFPA 253 (ASTM E 648).
•
Must be of contract quality and suitable for commercial use.•Carpet must be color-fast, non-cracking, and non-fading.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
C-01-APage 2
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Carpet Tile @ Lobby (OPTION B)Item Number: C-01-B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Mohawk Industries, Inc.
Revision(s):
Contact: Karin Hockman
Phone: (410) 233-3891Fax:
Address:
Address: 160 South Industrial Blvd.Calhoun GA 30701-
Contact:E-mail: karin_hockman@mohawkind.comE-mail:
800#: (800) 241-4494
Web: www.mohawkind.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Color: 979 ModifyWidth or Rug Size: 12" x 36"
Weight: 18 oz.Content: Duracolor® Premium NylonType: Tufted, Textured Loop
Primary Backing: EcoFlex NXTPile Height .086" (2.18 mm)Gauge: 1/12Stitches Per Inch: 11.0
Installation Method: See Notes
Style Name: Transformed Façade
Dye Method: Solution Dyed
Notes: Refer to seaming diagram / plan-o-gram provided by manufacturer for installation pattern and method.
Flame Requirements: ASTM-E-648 Class 1
Style Number: *TRU-C1
Instructions:Installer to provide all materials and equipment for complete installation, seaming diagrams, and full carpet layouts for all areas.
•
Supplied items and installation methods must be of contract quality and suitable for commercial use.•All quantities to be verified by installer.•Must meet or exceed all Fire Hazard/Flammability codes. If applicable codes do not address carpet and pad it must at minimum meet NFPA 253 (ASTM E 648).
•
Tru by Hilton
C-01-BPage 1
13Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Carpet Tile @ Lobby (OPTION B)Item Number: C-01-B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Mohawk Industries, Inc.Instructions:
Must be of contract quality and suitable for commercial use.•Carpet must be color-fast, non-cracking, and non-fading.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
C-01-BPage 2
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Carpet Tile @ Lobby (OPTION C)Item Number: C-01-C
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Shaw Industries
Revision(s):
Contact: Nancy Dickinson
Phone: (513) 673-3600Fax:
Address:
Address: 185 South Industrial Blvd.Calhoun GA 30701-
Contact:E-mail: nancy@dickinsoncontract.comE-mail:Web: www.shawcontractgroup.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Color: 01505/ EclipseWidth or Rug Size: 24" x 24"
Weight: 20 oz.Content: Eco solution nylonType: Multi level pattern loop
Primary Backing: SyntheticSecondary Backing: Ecoworx® TilePile Height 0.108" (2.74 mm)Gauge: 1/12Stitches Per Inch: 10
Installation Method: See Notes
Style Name: Visible Tile
Dye Method: 100% solution dyed
Notes: Refer to seaming diagram / plan-o-gram provided by manufacturer for installation pattern and method.
Flame Requirements: ASTM-E-648 Class 1
Style Number: 5T002
Instructions:Installer to provide all materials and equipment for complete installation, seaming diagrams, and full carpet layouts for all areas.
•
Supplied items and installation methods must be of contract quality and suitable for commercial use.•All quantities to be verified by installer.•Must meet or exceed all Fire Hazard/Flammability codes. If applicable codes do not address carpet and pad it must at minimum meet NFPA 253 (ASTM E 648).
•
Tru by Hilton
C-01-CPage 1
13Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Carpet Tile @ Lobby (OPTION C)Item Number: C-01-C
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Shaw IndustriesInstructions:
Must be of contract quality and suitable for commercial use.•Carpet must be color-fast, non-cracking, and non-fading.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
C-01-CPage 2
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural Specs Item Number: C-02-AItem Description: Accent Carpet Tile @ Corridor (OPTION A)
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Patcraft Commercial Flooring
Revision(s):
Contact: Theresa Schneider
Phone:Fax:
Address: Address: P.O Box 1527Dalton GA 30722-1527
Contact:E-mail: theresa.schneider@patcraft.comE-mail:
800#: (800) 713-6697
Web: www.patcraft.comWeb:
Mobile: (513) 805-1070Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Color:Width or Rug Size:
Weight:Content:Type:
Primary Backing:Secondary Backing:Pile HeightGauge:Stitches Per Inch:
Installation Method:
Style Name:
Dye Method:
Notes: Refer to seaming diagram / plan-o-gram provided by manufacturer for installation pattern and method.
Flame Requirements:
Style Number: *800Q9*Room Key*590 Black Jacket*24" x 24"*Multi-level pattern loop*Eco Solution Nylon*19.0 oz*Non- Woven Synthetic*Ecoworx® Tile*3/32" low - 6/32" high*1/12*11.5*100% Solution Dyed*See Notes*ASTM-E-648 Class 1
Instructions:Installer to provide all materials and equipment for complete installation, seaming diagrams, and full carpet layouts for all areas.
•
Tru by Hilton
C-02-APage 1
13Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural Specs Item Number: C-02-AItem Description: Accent Carpet Tile @ Corridor (OPTION A)
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Patcraft Commercial FlooringInstructions:
Supplied items and installation methods must be of contract quality and suitable for commercial use.•All quantities to be verified by installer.•Must meet or exceed all Fire Hazard/Flammability codes. If applicable codes do not address carpet and pad it must at minimum meet NFPA 253 (ASTM E 648).
•
Must be of contract quality and suitable for commercial use.•Carpet must be color-fast, non-cracking, and non-fading.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
C-02-APage 2
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Carpet Tile @ Corridor
(OPTION B)
Item Number: C-02-B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Mohawk Industries, Inc.
Revision(s):
Contact: Karin Hockman
Phone: (410) 233-3891Fax:
Address:
Address: 160 South Industrial Blvd.Calhoun GA 30701-
Contact:E-mail: karin_hockman@mohawkind.comE-mail:
800#: (800) 241-4494
Web: www.mohawkind.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Color: 949 EvergladeWidth or Rug Size: 12" x36"
Weight: 17 oz. per sq. ydContent: Duracolor® Premium NylonType: Tufted, Textured Loop
Primary Backing: EcoFlex ICTPile Height .092"Gauge: 1/12Stitches Per Inch: 11.0
Installation Method: See Notes
Style Name: Kinesthetic
Dye Method: Solution Dyed / Yarn Dyed
Notes: Refer to seaming diagram / plan-o-gram provided by manufacturer for installation pattern and method.
Flame Requirements: ASTM E 648 Class 1
Style Number: *TRU-C2
Instructions:Installer to provide all materials and equipment for complete installation, seaming diagrams, and full carpet layouts for all areas.
•
Supplied items and installation methods must be of contract quality and suitable for commercial use.•All quantities to be verified by installer.•Must meet or exceed all Fire Hazard/Flammability codes. If applicable codes do not address carpet and pad it must at minimum meet NFPA 253 (ASTM E 648).
•
Tru by Hilton
C-02-BPage 1
13Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Carpet Tile @ Corridor
(OPTION B)
Item Number: C-02-B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Mohawk Industries, Inc.Instructions:
Must be of contract quality and suitable for commercial use.•Carpet must be color-fast, non-cracking, and non-fading.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
C-02-BPage 2
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Carpet Tile @ Corridor
(OPTION C)
Item Number: C-02-C
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Shaw Industries
Revision(s):
Contact: Nancy Dickinson
Phone: (513) 673-3600Fax:
Address:
Address: 185 South Industrial Blvd.Calhoun GA 30701-
Contact:E-mail: nancy@dickinsoncontract.comE-mail:Web: www.shawcontractgroup.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Color: 04505/ EclipseWidth or Rug Size: 24" x 24"
Weight: 22 oz.Content: Eco solution nylonType: Multi level pattern loop
Primary Backing: SyntheticSecondary Backing: Ecoworx® TilePile Height 0.109" (2.77 mm)Gauge: 1/12Stitches Per Inch: 9.5
Installation Method: See Notes
Style Name: Applied Tile
Dye Method: 100% solution dyed
Notes: Refer to seaming diagram / plan-o-gram provided by manufacturer for installation pattern and method.
Flame Requirements: ASTM E 648 Class 1
Style Number: 5T004
Instructions:Installer to provide all materials and equipment for complete installation, seaming diagrams, and full carpet layouts for all areas.
•
Supplied items and installation methods must be of contract quality and suitable for commercial use.•All quantities to be verified by installer.•
Tru by Hilton
C-02-CPage 1
13Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Carpet Tile @ Corridor
(OPTION C)
Item Number: C-02-C
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Shaw IndustriesInstructions:
Must meet or exceed all Fire Hazard/Flammability codes. If applicable codes do not address carpet and pad it must at minimum meet NFPA 253 (ASTM E 648).
•
Must be of contract quality and suitable for commercial use.•Carpet must be color-fast, non-cracking, and non-fading.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
C-02-CPage 2
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Carpet Tile @ Corridor, Typical
Elevator Lobbies & BOH (OPTION A)
Item Number: C-03-A
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Patcraft Commercial Flooring
Revision(s):
Contact: Theresa Schneider
Phone:Fax:
Address:
Address: P.O Box 1527Dalton GA 30722-1527
Contact:E-mail: theresa.schneider@patcraft.comE-mail:
800#: (800) 713-6697
Web: www.patcraft.comWeb:
Mobile: (513) 805-1070Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Color: *590 Trendy TweedWidth or Rug Size: *24" x 24"
Weight: *21.0 ozContent: *Eco Solution NylonType: *Multi-level pattern loop
Primary Backing: *Non- Woven SyntheticSecondary Backing: *Ecoworx® TilePile Height *3/32" low - 6/32" highGauge: *1/12Stitches Per Inch: *10.0
Installation Method: *See Notes
Style Name: *Check Out Square Tile
Dye Method: *100% Solution Dyed
Notes: *Refer to seaming diagram / plan-o-gram provided by manufacturer for installation pattern and method.
Flame Requirements: *ASTM-E-648 Class 1
Style Number: *W910H-0
Instructions:Installer to provide all materials and equipment for complete installation, seaming diagrams, and full carpet layouts for all areas.
•
Supplied items and installation methods must be of contract quality and suitable for commercial use.•All quantities to be verified by installer.•
Tru by Hilton
C-03-APage 1
13Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Carpet Tile @ Corridor, Typical
Elevator Lobbies & BOH (OPTION A)
Item Number: C-03-A
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Patcraft Commercial FlooringInstructions:
Must meet or exceed all Fire Hazard/Flammability codes. If applicable codes do not address carpet and pad it must at minimum meet NFPA 253 (ASTM E 648).
•
Must be of contract quality and suitable for commercial use.•Carpet must be color-fast, non-cracking, and non-fading.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
C-03-APage 2
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Carpet Tile @ Corridor, Typical
Elevator Lobbies & BOH (OPTION B)
Item Number: C-03-B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Mohawk Industries, Inc.
Revision(s):
Contact: Karin Hockman
Phone: (410) 233-3891Fax:
Address:
Address: 160 South Industrial Blvd.Calhoun GA 30701-
Contact:E-mail: karin_hockman@mohawkind.comE-mail:
800#: (800) 241-4494
Web: www.mohawkind.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Color: 979 ModifyWidth or Rug Size: 12" x 36"
Weight: 18 oz.Content: Duracolor® Premium NylonType: Tufted, Textured Loop
Primary Backing: EcoFlex NXTPile Height .086" (2.18 mm)Gauge: 1/12Stitches Per Inch: 11.0
Installation Method: See Notes
Style Name: Transformed Façade
Dye Method: Solution Dyed
Notes: Refer to seaming diagram / plan-o-gram provided by manufacturer for installation pattern and method.
Flame Requirements: ASTM-E-648 Class 1
Style Number: *TRU-C1
Instructions:Installer to provide all materials and equipment for complete installation, seaming diagrams, and full carpet layouts for all areas.
•
Supplied items and installation methods must be of contract quality and suitable for commercial use.•All quantities to be verified by installer.•Must meet or exceed all Fire Hazard/Flammability codes. If applicable codes do not address carpet and pad it must at minimum meet NFPA 253 (ASTM E 648).
•
Tru by Hilton
C-03-BPage 1
13Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Carpet Tile @ Corridor, Typical
Elevator Lobbies & BOH (OPTION B)
Item Number: C-03-B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Mohawk Industries, Inc.Instructions:
Must be of contract quality and suitable for commercial use.•Carpet must be color-fast, non-cracking, and non-fading.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
C-03-BPage 2
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Carpet Tile @ Corridor, Typical
Elevator Lobbies & BOH (OPTION C)
Item Number: C-03-C
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Shaw Industries
Revision(s):
Contact: Nancy Dickinson
Phone: (513) 673-3600Fax:
Address:
Address: 185 South Industrial Blvd.Calhoun GA 30701-
Contact:E-mail: nancy@dickinsoncontract.comE-mail:Web: www.shawcontractgroup.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Color: 01505/ EclipseWidth or Rug Size: 24" x 24"
Weight: 20 oz.Content: Eco solution nylonType: Multi level pattern loop
Primary Backing: SyntheticSecondary Backing: Ecoworx® TilePile Height 0.108" (2.74 mm)Gauge: 1/12Stitches Per Inch: 10
Installation Method: See Notes
Style Name: Visible Tile
Dye Method: 100% solution dyed
Notes: Refer to seaming diagram / plan-o-gram provided by manufacturer for installation pattern and method.
Flame Requirements: ASTM E 648 Class 1
Style Number: 5T002
Instructions:Installer to provide all materials and equipment for complete installation, seaming diagrams, and full carpet layouts for all areas.
•
Supplied items and installation methods must be of contract quality and suitable for commercial use.•All quantities to be verified by installer.•
Tru by Hilton
C-03-CPage 1
13Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Carpet Tile @ Corridor, Typical
Elevator Lobbies & BOH (OPTION C)
Item Number: C-03-C
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Shaw IndustriesInstructions:
Must meet or exceed all Fire Hazard/Flammability codes. If applicable codes do not address carpet and pad it must at minimum meet NFPA 253 (ASTM E 648).
•
Must be of contract quality and suitable for commercial use.•Carpet must be color-fast, non-cracking, and non-fading.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
C-03-CPage 2
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Carpet Tile @ Corridor, Typical
Elevator Lobbies & BOH (OPTION D)
Item Number: C-03-D
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Interface
Revision(s):
Contact: Susan Margraf
Phone: (800) 336-0225Fax:
Address:
Address: 8 Denny PlaceCincinnati OH 45227-
Contact:E-mail: susan.margraf@interfaceflor.comE-mail:Web: www.interfaceflor.comWeb:
Mobile: (513) 200-4734Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Color: See NotesWidth or Rug Size: 9.845 in. x 39.38 in.
Weight: 16 oz.Content: 100% Recycled Content Type 6 NylonType: Tufted Textured Loop
Primary Backing: GlasBac®Pile Height 0.16 inGauge: 1/12 inStitches Per Inch: 8 /in
Installation Method: See Notes
Style Name: Harmonize
Dye Method: 100% Solution Dyed
Notes: Integration of both pattern colors, 104043 Gravel and 104042 Iron, in approved corridor flooring design. Refer to Tru seaming diagram / plan-o-gram provided by manufacturer for installation pattern and method.
Flame Requirements: ASTM E 648 Class 1
Style Number: 138720AK00
Instructions:Installer to provide all materials and equipment for complete installation, seaming diagrams, and full carpet layouts for all areas.
•
Supplied items and installation methods must be of contract quality and suitable for commercial use.•All quantities to be verified by installer.•
Tru by Hilton
C-03-DPage 1
13Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Carpet Tile @ Corridor, Typical
Elevator Lobbies & BOH (OPTION D)
Item Number: C-03-D
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: InterfaceInstructions:
Must meet or exceed all Fire Hazard/Flammability codes. If applicable codes do not address carpet and pad it must at minimum meet NFPA 253 (ASTM E 648).
•
Must be of contract quality and suitable for commercial use.•Carpet must be color-fast, non-cracking, and non-fading.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
C-03-DPage 2
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Carpet Tile @ Corridor, Typical
Elevator Lobbies & BOH (OPTION E)
Item Number: C-03-E
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Interface
Revision(s):
Contact: Susan Margraf
Phone: (800) 336-0225Fax:
Address:
Address: 8 Denny PlaceCincinnati OH 45227-
Contact:E-mail: susan.margraf@interfaceflor.comE-mail:Web: www.interfaceflor.comWeb:
Mobile: (513) 200-4734Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Color: See NotesWidth or Rug Size: 19.69 in. x 39.38 in.
Weight: 18 oz.Content: 100% Recycled Content Type 6 NylonType: Tufted Textured Loop
Primary Backing: GlasBac®Pile Height 0.15 inGauge: 1/12 inStitches Per Inch: 8 /in
Installation Method: See Notes
Style Name: Grasmere
Dye Method: 100% Solution Dyed
Notes: Integration of both pattern colors, 102845 Bedrock 102846 Quarry, in approved corridor flooring design. Refer to Tru seaming diagram / plan-o-gram provided by manufacturer for installation pattern and method.
Flame Requirements: ASTM E 648 Class 1
Style Number: 138440AB00
Instructions:Installer to provide all materials and equipment for complete installation, seaming diagrams, and full carpet layouts for all areas.
•
Supplied items and installation methods must be of contract quality and suitable for commercial use.•All quantities to be verified by installer.•
Tru by Hilton
C-03-EPage 1
13Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Carpet Tile @ Corridor, Typical
Elevator Lobbies & BOH (OPTION E)
Item Number: C-03-E
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: InterfaceInstructions:
Must meet or exceed all Fire Hazard/Flammability codes. If applicable codes do not address carpet and pad it must at minimum meet NFPA 253 (ASTM E 648).
•
Must be of contract quality and suitable for commercial use.•Carpet must be color-fast, non-cracking, and non-fading.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
C-03-EPage 2
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Broadloom Carpet @ Stairwell
(OPTION A)
Item Number: C-04-A
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Patcraft Commercial Flooring
Revision(s):
Contact: Theresa Schneider
Phone:Fax:
Address: Address: P.O Box 1527Dalton GA 30722-1527
Contact:E-mail: theresa.schneider@patcraft.comE-mail:
800#: (800) 713-6697
Web: www.patcraft.comWeb:
Mobile: (513) 805-1070Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Color: *590 Trendy TweedWidth or Rug Size: *6'-0" Precoat
Weight: *21 oz.Content: *Eco Solution Q® NylonType: *Multi-level Pattern Loop
Primary Backing: *Non-Woven SyntheticSecondary Backing: *EcoWorx® TilePile Height *3/32" low - 6/32" highGauge: *1/12Stitches Per Inch: *10.0
Installation Method: *See Notes
Style Name: *Check In
Dye Method: *100% Solution Dyed
Notes: Refer to seaming diagram / plan-o-gram provided by manufacturer for installation pattern and method.
Flame Requirements: *ASTM-E-648 Class 1
Style Number: *42HVM
Instructions:Installer to provide all materials and equipment for complete installation, seaming diagrams, and full carpet layouts for all areas.
•
Supplied items and installation methods must be of contract quality and suitable for commercial use.•All quantities to be verified by installer.•
Tru by Hilton
C-04-APage 1
13Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Broadloom Carpet @ Stairwell
(OPTION A)
Item Number: C-04-A
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Patcraft Commercial FlooringInstructions:
Must meet or exceed all Fire Hazard/Flammability codes. If applicable codes do not address carpet and pad it must at minimum meet NFPA 253 (ASTM E 648).
•
Must be of contract quality and suitable for commercial use.•Carpet must be color-fast, non-cracking, and non-fading.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
C-04-APage 2
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Broadloom Carpet @ Stairwell
(OPTION B)
Item Number: C-04-B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Mohawk Industries, Inc.
Revision(s):
Contact: Karin Hockman
Phone: (410) 233-3891Fax:
Address:
Address: 160 South Industrial Blvd.Calhoun GA 30701-
Contact:E-mail: karin_hockman@mohawkind.comE-mail:
800#: (800) 241-4494
Web: www.mohawkind.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: MM
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Color: *Rain ShadowWidth or Rug Size: *12' wide
Repeat: *18"W x 39.27"L
Weight: *32 oz.Content: *Colorstrand SD Nylong
Type: *Tufted - Textured Pattern Cut
Primary Backing: *Woven PolypropylenePile Height *0.152"Gauge: *1/12Stitches Per Inch: *11
Installation Method: *See Notes
Style Name: *Mono Vista
Dye Method: *Solution Dyed
Notes: *Refer to seaming diagram / plan-o-gram provided by manufacturer for installation method.
Style Number: *MH329-859
Instructions:Installer to provide all materials and equipment for complete installation, seaming diagrams, and full carpet layouts for all areas.
•
Supplied items and installation methods must be of contract quality and suitable for commercial use.•All quantities to be verified by installer.•Must meet or exceed all Fire Hazard/Flammability codes. If applicable codes do not address carpet and pad it must at minimum meet NFPA 253 (ASTM E 648).
•
Tru by Hilton
C-04-BPage 1
13Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Broadloom Carpet @ Stairwell
(OPTION B)
Item Number: C-04-B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Mohawk Industries, Inc.Instructions:
Must be of contract quality and suitable for commercial use.•Carpet must be color-fast, non-cracking, and non-fading.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
C-04-BPage 2
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Broadloom Carpet @ Stairwell
(OPTION C)
Item Number: C-04-C
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Shaw Industries
Revision(s):
Contact: Nancy Dickinson
Phone: (513) 673-3600Fax:
Address: Address: 185 South Industrial Blvd.Calhoun GA 30701-
Contact:E-mail: nancy@dickinsoncontract.comE-mail:Web: www.shawcontractgroup.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Color: *97505/ LogwoodWidth or Rug Size: *12' wide
Weight: *32 oz.Content: *Eco Solution NylonType: Multi-level Pattern Loop
Primary Backing: SyntheticSecondary Backing: ClassicbacPile Height *0.224"Gauge: *1/10Stitches Per Inch: *12.0
Installation Method:
Style Name: *Cabuya
Dye Method:
Notes: Refer to seaming diagram / plan-o-gram provided by manufacturer for installation pattern and method.
Flame Requirements:
100% Solution Dyed See NotesASTM E 648 Class 1
Style Number: *5B096
Instructions:Installer to provide all materials and equipment for complete installation, seaming diagrams, and full carpet layouts for all areas.
•
Supplied items and installation methods must be of contract quality and suitable for commercial use.•All quantities to be verified by installer.•
Tru by Hilton
C-04-CPage 1
**
***
*
13Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Broadloom Carpet @ Stairwell
(OPTION C)
Item Number: C-04-C
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Shaw IndustriesInstructions:
Must meet or exceed all Fire Hazard/Flammability codes. If applicable codes do not address carpet and pad it must at minimum meet NFPA 253 (ASTM E 648).
•
Must be of contract quality and suitable for commercial use.•Carpet must be color-fast, non-cracking, and non-fading.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
C-04-CPage 2
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Corner Guards @ GuestroomItem Number: CD-01
Item Quantity:
Manufacturer: InPro Corporation Source: InPro Corporation
Revision(s):
Contact: Leslie Frederick
Phone: (513) 646-2163Fax:
Address: S80 W18766 Apollo DrMuskego WI 53150-
Address: S80 W18766 Apollo DrMuskego WI 53150-
Contact:E-mail: lfrederick@inprocorp.comE-mail:
800# : (800) 222-5556 800#: (800) 222-5556
Web: www.inprocorp.comWeb: www.inprocorp.com
Phone: (292) 679-9010Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Tape-On 90 DegreeColor/Finish: GraystoneSize/Dimensions: 3/4" x 3/4" x full height
Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Quantities to be verified by installer.•
Tru by Hilton
CD-01Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Corner Guards @ Lobby and PantryItem Number: CD-02
Item Quantity:
Manufacturer: InPro Corporation Source: InPro Corporation
Revision(s):
Contact: Leslie Frederick
Phone: (513) 646-2163Fax:
Address: S80 W18766 Apollo DrMuskego WI 53150-
Address: S80 W18766 Apollo DrMuskego WI 53150-
Contact:E-mail: lfrederick@inprocorp.comE-mail:
800# : (800) 222-5556 800#: (800) 222-5556
Web: www.inprocorp.comWeb: www.inprocorp.com
Phone: (292) 679-9010Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Surface Mount Stainless Steel Corner GuardSize/Dimensions: 90 degree x 1 1/2" wing x Full height of wall. Type
430 (standard grade) 16 gauge
Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Quantities to be verified by installer.•
Tru by Hilton
CD-02Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: EIFS Wall Cladding AItem Number: EX-01
Item Quantity:
Manufacturer: Dryvit Systems, Inc. Source: Dryvit Systems, Inc
Revision(s):
Contact: Robert Dazel
Phone: (734) 243-9301Fax:
Address: One Energy WayWest Warwick RI 02893-
Address: One Energy WayWest Warwick RI 02893-
Contact:E-mail: bob.dazel@dryvit.comE-mail:
info@dryvit.com
800# : (800) 556-7752 800#: (800) 556-7752
Web: www.dryvit.comWeb: www.dryvit.com
Mobile: (734) 243-0404Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Dryvit Sandblast DPRColor/Finish: TRUH 02 1030S- with "StratoTone", high
performance colorant , Pantone 7C BlackSize/Dimensions: Refer to architectural drawings for details and
locations.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
EX-01Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: EIFS Wall Cladding BItem Number: EX-02
Item Quantity:
Manufacturer: Dryvit Systems, Inc. Source: Dryvit Systems, Inc
Revision(s):
Contact: Robert Dazel
Phone: (734) 243-9301Fax:
Address: One Energy WayWest Warwick RI 02893-
Address: One Energy WayWest Warwick RI 02893-
Contact:E-mail: bob.dazel@dryvit.comE-mail:
info@dryvit.com
800# : (800) 556-7752 800#: (800) 556-7752
Web: www.dryvit.comWeb: www.dryvit.com
Mobile: (734) 243-0404Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Dryvit Sandblast HDP- HydrophobicColor/Finish: TRUH 01 2740- Dryvit #613B OvercastSize/Dimensions: Refer to architectural drawings for details and
locations.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
EX-02Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: EIFS Wall Cladding CItem Number: EX-03
Item Quantity:
Manufacturer: Dryvit Systems, Inc. Source: Dryvit Systems, Inc
Revision(s):
Contact: Robert Dazel
Phone: (734) 243-9301Fax:
Address: One Energy WayWest Warwick RI 02893-
Address: One Energy WayWest Warwick RI 02893-
Contact:E-mail: bob.dazel@dryvit.comE-mail:
info@dryvit.com
800# : (800) 556-7752 800#: (800) 556-7752
Web: www.dryvit.comWeb: www.dryvit.com
Mobile: (734) 243-0404Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Dryvit - TerraNeo Polished GraniteColor/Finish: TRUH 03 1101- Dryvit #207 GlacierSize/Dimensions: Refer to architectural drawings for details and
locations.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
EX-03Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: EIFS Wall Cladding DItem Number: EX-04
Item Quantity:
Manufacturer: Dryvit Systems, Inc. Source: Dryvit Systems, Inc
Revision(s):
Contact: Robert Dazel
Phone: (734) 243-9301Fax:
Address: One Energy WayWest Warwick RI 02893-
Address: One Energy WayWest Warwick RI 02893-
Contact:E-mail: bob.dazel@dryvit.comE-mail:
info@dryvit.com
800# : (800) 556-7752 800#: (800) 556-7752
Web: www.dryvit.comWeb: www.dryvit.com
Mobile: (734) 243-0404Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Dryvit - "Demandit" Color CoatingColor/Finish: See notes and refer to color diagram 16E/ A5.01Size/Dimensions: Refer to architectural drawings for details and
locations.
Notes: Minimum of 2 Coats over Sandblast HDP- TRUH 01 2740
Color 1: TRUH 04 1085S with "StratoTone" high performance colorant- Pantone PMS Process Yellow, OR Benjamin Moore 2022-30 Bright Yellow
Color 2: TRUH 05 1085S with "StratoTone" high performance colorant- Pantone PMS Process Cyan, OR Benjamin Moore 2059-50 Yosemite Blue
Color 3: TRUH 06 1085S with "StratoTone" high performance colorant- Pantone PMS #317C, OR Benjamin Moore 2048-60 Jamaican Aqua
Color 4: TRUH 07 1085S with "StratoTone" high performance colorant- Pantone PMS #2955C, OR Benjamin Moore 2061-20 Champion Cobalt
Color 5: TRUH 08 1085S with "StratoTone" high performance colorant- Pantone PMS #2685C, OR Benjamin Moore 2071-10 Exotic Purple
Instructions:
Tru by Hilton
EX-04Page 1
13Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: EIFS Wall Cladding DItem Number: EX-04
Item Quantity:
Manufacturer: Dryvit Systems, Inc. Source: Dryvit Systems, IncInstructions:
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
EX-04Page 2
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: EIFS Wall Cladding EItem Number: EX-05
Item Quantity:
Manufacturer: Dryvit Systems, Inc. Source: Dryvit Systems, Inc
Revision(s):
Contact: Robert Dazel
Phone: (734) 243-9301Fax:
Address: One Energy WayWest Warwick RI 02893-
Address: One Energy WayWest Warwick RI 02893-
Contact:E-mail: bob.dazel@dryvit.comE-mail:
info@dryvit.com
800# : (800) 556-7752 800#: (800) 556-7752
Web: www.dryvit.comWeb: www.dryvit.com
Mobile: (734) 243-0404Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Dryvit Sandblast DPRColor/Finish: TRUH 05 1030S with "StatoTone" high performance
colorant - Pantone PMS Process CyanSize/Dimensions: Refer to architectural drawings for details and
locations.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
•Refer to Architectural drawings for details and location.•
Tru by Hilton
EX-05Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: EIFS Wall Cladding FItem Number: EX-06
Item Quantity:
Manufacturer: Dryvit Systems, Inc. Source: Dryvit Systems, Inc
Revision(s):
Contact: Robert Dazel
Phone: (734) 243-9301Fax:
Address: One Energy WayWest Warwick RI 02893-
Address: One Energy WayWest Warwick RI 02893-
Contact:E-mail: bob.dazel@dryvit.comE-mail:
info@dryvit.com
800# : (800) 556-7752 800#: (800) 556-7752
Web: www.dryvit.comWeb: www.dryvit.com
Mobile: (734) 243-0404Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Dryvit Sandblast HDP - Hydrophobic TRUH 09 2740Color/Finish: Dryvit #615A TattletaleSize/Dimensions: Refer to architectural drawings for details and
locations.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
EX-06Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Outdoor High Pressure Laminate
Panel A
Item Number: EX-07
Item Quantity:
Manufacturer: Trespa Source: Trespa
Revision(s):
Contact: Kevin Bellinger
Phone: (704) 526-7740Fax:
Address: 62 Greene StreetGround FloorNew York NY 10012- United States of America
Address: 62 Greene StreetGround FloorNew York NY 10012-
Contact:E-mail: k.bellinger@trespa.comE-mail: Info.NorthAmerica@Trespa.com
800# : (800) 487-3772 800#: (800) 487-3772
Web: www.trespa.comWeb: http://www.trespa.com
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Trespa® Meteon®Color/Finish: Color to match Pantone PMS Process Cyan/ MatteSize/Dimensions: Refer to architectural drawings for details and
locations.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
EX-07Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Outdoor High Pressure Laminate
Panel B
Item Number: EX-08
Item Quantity:
Manufacturer: Trespa Source: Trespa
Revision(s):
Contact: Kevin Bellinger
Phone: (704) 526-7740Fax:
Address: 62 Greene StreetGround FloorNew York NY 10012- United States of America
Address: 62 Greene StreetGround FloorNew York NY 10012-
Contact:E-mail: k.bellinger@trespa.comE-mail: Info.NorthAmerica@Trespa.com
800# : (800) 487-3772 800#: (800) 487-3772
Web: www.trespa.comWeb: http://www.trespa.com
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Trespa® Meteon®Color/Finish: Color to match Pantone PMS Process Yellow/ MatteSize/Dimensions: Refer to architectural drawings for details and
locations.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
EX-08Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Paint @ Exterior Stair Doors & Door
Frames
Item Number: EX-09
Item Quantity:
Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting
Revision(s):
Contact: Craig Bunting
Phone: (201) 949-6187
Fax:
Address: Address:
Contact:E-mail: craig.bunting@benjaminmoore.comE-mail:Web: www.benjaminmoore.comWeb:
Craig Buntingcraig.bunting@benjaminmoore.com www.benjaminmoore.com
Mobile: (973) 896-6904Mobile: (973) 896-6904
Phone: (201) 949-6187
Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: MM
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: *Grand Entrance Waterborne AlkydColor/Finish: *1596 Nightfall / High Gloss 148
Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
EX-09Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: EIFS Wall Cladding GItem Number: EX-10
Item Quantity:
Manufacturer: Dryvit Systems, Inc. Source: Dryvit Systems, Inc
Revision(s):
Contact: Robert Dazel
Phone: (734) 243-9301Fax:
Address: One Energy WayWest Warwick RI 02893-
Address: One Energy WayWest Warwick RI 02893-
Contact:E-mail: bob.dazel@dryvit.comE-mail:
info@dryvit.com
800# : (800) 556-7752 800#: (800) 556-7752
Web: www.dryvit.comWeb: www.dryvit.com
Mobile: (734) 243-0404Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: MM
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: *Dryvit - "Demandit" Color CoatingColor/Finish: *See NotesSize/Dimensions: *Refer to architectural drawings for details and
locations.
Notes: *Color: TRUH 04 1085S with "StratoTone" high performance colorant- Pantone PMS Process Yellow
Minimum of 2 Coats over Sandblast HDP- TRUH 01 2740
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
EX-10Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: LED DownLight @ Lounge & Game
Zone
Item Number: L-01
Item Quantity:
Manufacturer: Juno Lighting Group Source: Regency Lighting
Revision(s):
Contact: Jonathan Wehan
Phone: (800) 284-2024Fax:
Address: 1300 South Wolf RoadDes Plaines IL 60018-
Address: 9261 Jordan AvenueChatsworth CA 91311-
Contact:E-mail: jon.wehan@regencylighting.comE-mail:
800# : (800) 367-5866 800#: (800) 284-2024
Web: www.regencylighting.comWeb: www.junolightinggroup.com
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: LC4-S-23-30-U-B-G3/ L400HW-CSColor/Finish: Black FinishSize/Dimensions: 5-3/4"DIA x 10-1/2"H
Notes: Surface mounted nominal 4" aperature downlight
LED lamp included (2300 LM, 3000K Color Temperature)
Refer to architectural plans for locations.
Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
L-01Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: LED Recessed Downlight @ Entry,
Breakfast, Breakroom, Restrooms, Hydration Station, Pool & Corridor
Item Number: L-03
Item Quantity:
Manufacturer: Juno Lighting Group Source: Regency Lighting
Revision(s):
Contact: Jonathan Wehan
Phone: (800) 284-2024Fax:
Address: 1300 South Wolf RoadDes Plaines IL 60018-
Address: 9261 Jordan AvenueChatsworth CA 91311-
Contact:E-mail: jon.wehan@regencylighting.comE-mail:
800# : (800) 367-5866 800#: (800) 284-2024
Web: www.regencylighting.comWeb: www.junolightinggroup.com
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: L4-23-30-U-G3/ L400-CS-WHColor/Finish: Clear Satin Finish with White FlangeSize/Dimensions: 4-1/4" Dia. x 6"H
Notes: Recessed nominal 4" aperature downlight, white painted flange
LED Iamp included (2300 LM, 3000K Color Temperature)
Please refer to architectural drawings for locations.
Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
L-03Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: LED Recessed Downlight @ Fitness
Center
Item Number: L-03.1
Item Quantity:
Manufacturer: Juno Lighting Group Source: Regency Lighting
Revision(s):
Contact: Jonathan Wehan
Phone: (800) 284-2024Fax:
Address: 1300 South Wolf RoadDes Plaines IL 60018-
Address: 9261 Jordan AvenueChatsworth CA 91311-
Contact:E-mail: jon.wehan@regencylighting.comE-mail:
800# : (800) 367-5866 800#: (800) 284-2024
Web: www.regencylighting.comWeb: www.junolightinggroup.com
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: L4-23-30-U-G3 / L400P-CS-WHColor/Finish: Clear Satin Finish with White FlangeSize/Dimensions: 4-1/4" Dia. x 6"H
Notes: Recessed nominal 4" aperature downlight, self flanged, aluminum reflector
LED lamp included (2300 LM, 3000K Color Temperature)
Please refer to architectural drawings for locations.
Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
L-03.1Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Linear LED Fixture @ Lobby Entry
(OPTION A)
Item Number: L-04-A
Item Quantity:
Manufacturer: Philips Lighting Source: Regency Lighting
Revision(s):
Contact: Jonathan Wehan
Phone: (800) 284-2024Fax:
Address: 3000 Minuteman RoadAndover MA 01810- United States of America
Address: 9261 Jordan AvenueChatsworth CA 91311-
Contact: Shannon DrakeE-mail: jon.wehan@regencylighting.comE-mail:
800# : 1-855-486-2216 800#: (800) 284-2024
Web: www.regencylighting.comWeb: www.usa.lighting.philips.com
Phone: (978) 659-3000Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: 2911LCGQN-4-7-1-E-CColor/Finish: Custom Dark Gray Finish to match Tiger Drylac RAL
Color: 7011Size/Dimensions: 4'L x 3"W x 5"H
Notes: Surface mounted nominal 3.5" lensed troffer
LED lamp included (2300 LM, 3000K Color Temperature)
Refer to architectural plans for locations.
Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
L-04-APage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Linear LED Fixture @ Lobby Entry
(OPTION B)
Item Number: L-04-B
Item Quantity:
Manufacturer: Axis Lighting Source: Curtis Stout
Revision(s):
Contact: Terry Ryan
Phone: (901) 260-0034Fax: (901) 360-0035
Address: 2505 SenkusMontreal QC H8N 2X8 Canada
Address: 3478 Winhoma DriveMemphis TN 38118-
Contact:E-mail: tmryan@chstout.comE-mail:Web: www.chstout.comWeb: www.axislighting.com
Phone: (514) 948-6272Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: BMSLED-B3-MF-500-80-30-SO-4'-C-UNV-1Color/Finish: Custom Dark *Gray Finish to match Tiger Drlac RAL
Color: 7011Size/Dimensions: 4'L x 3-3/8" W x 4"H
Notes: Surface mounted nominal 3.5" aperature integral LED lensed troffer.
Refer to architectural plans for locations.
Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
L-04-BPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: LED Surface Mounted Cylinderical
Light Fixture @ Work Area and Dining
Item Number: L-05
Item Quantity:
Manufacturer: Juno Lighting Group Source: Regency Lighting
Revision(s):
Contact: Jonathan Wehan
Phone: (800) 284-2024Fax:
Address: 1300 South Wolf RoadDes Plaines IL 60018-
Address: 9261 Jordan AvenueChatsworth CA 91311-
Contact:E-mail: jon.wehan@regencylighting.comE-mail:
800# : (800) 367-5866 800#: (800) 284-2024
Web: www.regencylighting.comWeb: www.junolightinggroup.com
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: LC6-S-23-30-U-Custom-G3 / L600HW-CSColor/Finish: Custom Light Blue Housing to match Tiger Drylac RAL
Color: 6027Size/Dimensions: *7-5/8" Dia. x 13-1/4" H
Notes: LED lamp included (2300 LM, 3000K Color Temperature)
Refer to architectural plans for locations.
Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
L-05Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Linear LED Wall Grazer @ Game Zone
and Lounge
Item Number: L-08
Item Quantity:
Manufacturer: Boca Flasher, Inc. Source: Regency Lighting
Revision(s):
Contact: Jonathan Wehan
Phone: (800) 284-2024Fax:
Address: 552 NW 77th StreetBoca Raton FL 33487-
Address: 9261 Jordan AvenueChatsworth CA 91311-
Contact:E-mail: jon.wehan@regencylighting.comE-mail:
800#: (800) 284-2024
Web: www.regencylighting.comWeb: www.bocaflasher.com
Phone: (561) 989-5338Fax: (561) 982-8323
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: *Linear wall grazer/ HPNLS-HO-3000K-30X60-120-B-I-S-D-BB-17'
Color/Finish: BlackSize/Dimensions: *See notes
Notes: *LED lamp included (spacing to be 1" on center, 3000K color temperature)
Refer to architectural plans for locations.
Provide all necessary accessories and components needed to complete fixture. Coordinate with architectural drawings for total run length and dimensions. Units come in 6" increments, minimum of 12" and maximum of 96" long, 1.68" D x 1.75" H
Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
L-08Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Track Lighting System @ Command
Center Soffit (OPTION A)
Item Number: L-09-A
Item Quantity:
Manufacturer: Bruck Lighting Source: Regency Lighting
Revision(s):
Contact: Jonathan Wehan
Phone: (800) 284-2024Fax:
Address: 15774 Gateway CircleTustin CA 92780-
Address: 9261 Jordan AvenueChatsworth CA 91311-
Contact:E-mail: jon.wehan@regencylighting.comE-mail:
800#: (800) 284-2024
Web: www.regencylighting.comWeb: www.brucklighting.com
Phone: (714) 259-9959Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Z15 LED Track Spot/ 3350420-XTM19-13LM-30K-80-DA40-MC-ZONMC
Color/Finish: Matte ChromeSize/Dimensions: 3-1/8" Dia. x 5-1/8"H
Notes: *Suspended single circuit monoline track with mounted, adjustable LED accent lights.
LED lamp included (3000K Color Temperature)
Mounting height of track must be coordinated to align the bottom of track head to height of adjacent soffit. Refer to architectural plans for locations, and mounting heights.
Please order the following as required:Zonyx track system: suspended single circuit monoline track. Factory bent to curve.( Part numbers: 350-008-1-MC, 350-061-MC, 350-060-MC)Confirm all mounting and electrical accessories as required by contractor.
Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Fixture MUST be UL listed.•
Tru by Hilton
L-09-APage 1
13Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Track Lighting System @ Command
Center Soffit (OPTION A)
Item Number: L-09-A
Item Quantity:
Manufacturer: Bruck Lighting Source: Regency LightingInstructions:
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
L-09-APage 2
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Track Lighting @ Command Center
(OPTION B)
Item Number: L-09-B
Item Quantity:
Manufacturer: Zaneen Source: 37 Volts
Revision(s):
Contact: Francis Hollenkamp
Phone: (513) 578-5410Fax:
Address: 30 Tycos DriveToronto ON M6B 1V9 Canada
Address: 1777 Sycamore StreetCincinnati OH 45202-
Contact: E-mail: francis.hollenkamp@37volts.comE-mail:Web: ww.37volts.comWeb: www.zaneen.com
Mobile: (513) 462-5749Phone: (416) 247-9221Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: L22302-78Color/Finish: Silver/ MatteSize/Dimensions: 2-3/8" Dia. x 7-7/8" H
Notes: Surface mounted, LED downlight cylinder
3000K LED Color Temperature lamp
Aluminum Shade, Transparent Diffuser
Refer to architectural plans for locations and mounting heights.
Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
L-09-BPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: LED Lay-In Troffer Fixture @ Back of
House (OPTION A)
Item Number: L-11-A
Item Quantity:
Manufacturer: Oracle Lighting Source: Regency Lighting
Revision(s):
Contact: Jonathan Wehan
Phone: (800) 284-2024Fax:
Address: 1530 Church RoadMontebello CA 90640-
Address: 9261 Jordan AvenueChatsworth CA 91311-
Contact:E-mail: jon.wehan@regencylighting.comE-mail:
800# : (877) 375-5555 800#: (800) 284-2024
Web: www.regencylighting.comWeb: www.oraclelighting.com
Phone:Fax: (877) 375-3333
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: 24-OD1V-LED-5000L-DIM10-MVOLT-30K-80Color/Finish: WhiteSize/Dimensions: 47-13/16"L x 22" W x 4" D
Notes: Recessed Nominal 2' x4' downlight with center drop, bi-wings lens style
LED lamp included (5000 LM, 3000K Color Temperature)
Refer to architectural plans for locations.
Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
L-11-APage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: LED Lay-In Troffer Fixture @ Back of
House (OPTION B)
Item Number: L-11-B
Item Quantity:
Manufacturer: Axis Lighting Source: 37 Volts
Revision(s):
Contact: Francis Hollenkamp
Phone: (513) 578-5410Fax:
Address: 2505 SenkusMontreal QC H8N 2X8 Canada
Address: 1777 Sycamore StreetCincinnati OH 45202-
Contact:E-mail: francis.hollenkamp@37volts.comE-mail:Web: ww.37volts.comWeb: www.axislighting.com
Mobile: (513) 462-5749Phone: (514) 948-6272Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: DIALED-24-B3-5000-80-3-VL-W-UNV-1Color/Finish: WhiteSize/Dimensions: 48"L x 24"W x 4"H
Notes: Refer to architectural plans for locations.
Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
L-11-BPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: LED Surface Mounted General Lighting
@ Back of House (OPTION A)
Item Number: L-13-A
Item Quantity:
Manufacturer: Oracle Lighting Source: Regency Lighting
Revision(s):
Contact: Jonathan Wehan
Phone: (800) 284-2024Fax:
Address: 1530 Church RoadMontebello CA 90640-
Address: 9261 Jordan AvenueChatsworth CA 91311-
Contact:E-mail: jon.wehan@regencylighting.comE-mail:
800# : (877) 375-5555 800#: (800) 284-2024
Web: www.regencylighting.comWeb: www.oraclelighting.com
Phone:Fax: (877) 375-3333
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: 4-OC1-LED-4000L-DIM10-MVOLT-30K-80Color/Finish: White/ High Gloss Baked EnamelSize/Dimensions: 48"L x 6" W x 5-3/4"H
Notes: Surface mounted LED wraparound troffer
LED lamp included (4000 LM, 3000K Color Temperature)
Refer to architectural plans for locations.
Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
L-13-APage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: LED Surface Mounted General Lighting
@ Back of House (OPTION B)
Item Number: L-13-B
Item Quantity:
Manufacturer: Mercury Lighting Source: Mercury Lighting
Revision(s):
Contact:
Phone: (973) 244-9522Fax:
Address: 20 Audrey PlaceFarfield NJ 07004-
Address: 20 Audrey PlaceFairfield NJ 07004-
Contact:E-mail:E-mail:
800# : (800) 637-2584 800#: (800) 637-2584
Web: www.mercltg.comWeb: www.mercltg.com
Phone:Fax: (973) 244-9522
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: LSE2-4-4500-30K-HTAColor/Finish: WhiteSize/Dimensions: 45"L x 4.976" W x 4.25"H
Notes: Surface mounted integral LED wrap around troffer
LED lamp included (4000 LM, 3000K Color Temperature)
Refer to architectural plans for locations.
Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
L-13-BPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: LED Recessed Downlight @ Guest Bath
Shower
Item Number: L-15
Item Quantity:
Manufacturer: Juno Lighting Group Source: Regency Lighting
Revision(s):
Contact: Jonathan Wehan
Phone: (800) 284-2024Fax:
Address: 1300 South Wolf RoadDes Plaines IL 60018-
Address: 9261 Jordan AvenueChatsworth CA 91311-
Contact:E-mail: jon.wehan@regencylighting.comE-mail:
800# : (800) 367-5866 800#: (800) 284-2024
Web: www.regencylighting.comWeb: www.junolightinggroup.com
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: MD1LWG2-3K-FL-WHColor/Finish: WhiteSize/Dimensions: 2-1/4" DIA x 2-7/8"H
Notes: Mini LED downlight, Outdoor/Wet Location
LED lamp Included (3000K Color Temperature)
Order TL602E-25-WH electronic driver/transformer separately
Refer to architectural plans for locations.
Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
L-15Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: LED Recessed Gimbal @ Guestroom
Soffit & Guest Bath
Item Number: L-16
Item Quantity:
Manufacturer: Juno Lighting Group Source: Regency Lighting
Revision(s):
Contact: Jonathan Wehan
Phone: (800) 284-2024Fax:
Address: 1300 South Wolf RoadDes Plaines IL 60018-
Address: 9261 Jordan AvenueChatsworth CA 91311-
Contact:E-mail: jon.wehan@regencylighting.comE-mail:
800# : (800) 367-5866 800#: (800) 284-2024
Web: www.regencylighting.comWeb: www.junolightinggroup.com
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: MG1LG2-3K-FL-WHColor/Finish: WhiteSize/Dimensions: 2-5/8" DIA x 3-1/4"H
Notes: Mini LED Gimbal, Low Voltage
LED lamp Included (3000K Color Temperature)
Order TL602E-25-WH electronic driver/transformer separately
Refer to architectural plans for locations.
Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
L-16Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: LED Recessed Gimbal @ Guestroom
Landing Zone
Item Number: L-17
Item Quantity:
Manufacturer: Juno Lighting Group Source: Regency Lighting
Revision(s):
Contact: Jonathan Wehan
Phone: (800) 284-2024Fax:
Address: 1300 South Wolf RoadDes Plaines IL 60018-
Address: 9261 Jordan AvenueChatsworth CA 91311-
Contact:E-mail: jon.wehan@regencylighting.comE-mail:
800# : (800) 367-5866 800#: (800) 284-2024
Web: www.regencylighting.comWeb: www.junolightinggroup.com
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: MG1LG2-3K-FL-BZColor/Finish: BronzeSize/Dimensions: 2-5/8" DIA x 3-1/4"H
Notes: Mini LED Gimbal, Low Voltage
LED lamp Included (3000K Color Temperature)
Order TL602E-25-WH electronic driver/transformer separately
Refer to architectural plans for locations.
Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
L-17Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Cove Lighting @ Indoor PoolItem Number: L-18
Item Quantity:
Manufacturer: EcoSense Lighting Inc. Source: Regency Lighting
Revision(s):
Contact: Jonathan Wehan
Phone: (800) 284-2024Fax:
Address: 915 Wilshire Blvd.Suite 2175Los Angelas CA 90017-
Address: 9261 Jordan AvenueChatsworth CA 91311-
Contact:E-mail: jon.wehan@regencylighting.comE-mail:
800# : (855) 632-6736 800#: (800) 284-2024
Web: www.regencylighting.comWeb: www.ecosenselighting.com
Phone: (310) 496-6255Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: TROV L50/ L50-E-XX-10-30-80-MULT-AsymSize/Dimensions: Refer to architectural drawings for locations.
Notes: Provide all necessary accessories and components needed to complete fixture run. Coordinate with architectural drawings.
Certified for Dry/ Damp Locations AND Wet Locations
LED lamp included (3000K Color Temperature)
Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
L-18Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Downlight @ Façade RecessesItem Number: L-19
Item Quantity:
Manufacturer: ERCO Source: Regency Lighting
Revision(s):
Contact: Jonathan Wehan
Phone: (800) 284-2024Fax:
Address: 160 Raritan Center Pkwy Ste 10Edison NJ 08837 United States of America
Address: 9261 Jordan AvenueChatsworth CA 91311-
Contact: Christopher Tedesco, Spec. Sales Rep.E-mail: jon.wehan@regencylighting.comE-mail: info.us@erco.com
800#: (800) 284-2024
Web: www.regencylighting.comWeb: http://www.erco.com/
Phone: +1 (732) 225-8856Fax: +1 (732) 225-8857
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Quintessence Recessed Luminaire/ 80218.023Color/Finish: SilverSize/Dimensions: 8-3/4" DIA x 7-1/8" H
Notes: LED 6W, 420 Lumen, 3000K warm white bulb included.
Suitable for wet location.
Refer to architectural plans for locations.
Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
L-19Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: In-Ground Uplight @ Façade RecessesItem Number: L-20
Item Quantity:
Manufacturer: ERCO Source: Regency Lighting
Revision(s):
Contact: Jonathan Wehan
Phone: (800) 284-2024Fax:
Address: 160 Raritan Center Pkwy Ste 10Edison NJ 08837 United States of America
Address: 9261 Jordan AvenueChatsworth CA 91311-
Contact: Christopher Tedesco, Spec. Sales Rep.E-mail: jon.wehan@regencylighting.comE-mail: info.us@erco.com
800#: (800) 284-2024
Web: www.regencylighting.comWeb: http://www.erco.com/
Phone: +1 (732) 225-8856Fax: +1 (732) 225-8857
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Tesis In- Ground Directional Luminaire/ 33629.023Color/Finish: Stainless Steel/ BlackSize/Dimensions: 9.81" DIA x 8.8" D
Notes: LED 4W, 420 Lumen, 3000K warm white bulb included
Refer to architectural plans for locations.
Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
L-20Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Large Round Exterior Lighting @ Entry
Canopy
Item Number: L-21
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Regency Lighting
Revision(s):
Contact: Jonathan Wehan
Phone: (800) 284-2024Fax:
Address:
Address: 9261 Jordan AvenueChatsworth CA 91311-
Contact:E-mail: jon.wehan@regencylighting.comE-mail:
800#: (800) 284-2024
Web: www.regencylighting.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Surface Mount Circular Fixture/ #1105-0013Color/Finish: Aluminum/ Silver FinishSize/Dimensions: 48" Dia. x 4"H with 44" Dia. cutout at center of fixture
Notes: Non- DimmingGE Tetramax 3000K LED bulb with remote power accessSingle Piece White Acrylic Diffuser
FIXTURE MUST BE WET LISTED
FABRICATOR MUST VERIFY JUNCTION BOX LOCATION ON FIXTURE
Refer to architectural plans for mounting locations.
Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
L-21Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Small Round Exterior Lighting @ Entry
Canopy and Secondary Exterior Entry
Item Number: L-22
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Regency Lighting
Revision(s):
Contact: Jonathan Wehan
Phone: (800) 284-2024Fax:
Address:
Address: 9261 Jordan AvenueChatsworth CA 91311-
Contact:E-mail: jon.wehan@regencylighting.comE-mail:
800#: (800) 284-2024
Web: www.regencylighting.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Surface Mount Circular Fixture/ #1105-0011Color/Finish: Aluminum/ Silver FinishSize/Dimensions: 24" Dia. x 4"H with 20" Dia. cutout at center of fixture
Notes: Non- DimmingGE Tetramax 3000K LED bulb with remote power accessSingle Piece White Acrylic Diffuser
FIXTURE MUST BE WET LISTED
FABRICATOR MUST VERIFY JUNCTION BOX LOCATION ON FIXTURE
Refer to architectural plans for mounting locations.
Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
L-22Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Surface Mount Lighting @ StairwellsItem Number: L-23
Item Quantity:
Manufacturer: Lithonia Lighting Group Source: Regency Lighting
Revision(s):
Contact: Jonathan Wehan
Phone: (800) 284-2024
Fax:
Address: PO Box AConyers GA 30012-
Address: 9261 Jordan AvenueChatsworth CA 91311-
Contact: Linda Owen, Spec. Development ManagerE-mail: jon.wehan@regencylighting.comE-mail:
800#: (800) 284-2024
Web: www.regencylighting.comWeb:
Phone: (770) 922-9000 x 2033
Fax: (770) 483-2635
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: *WL4 40L EZ1 LP830Color/Finish: *WhiteSize/Dimensions: *48" L x 4-3/4" W x 3-7/8"H
Notes: *Refer to architectural plans for mounting locations.
Please refer to local electrical engineer to determine final quantity and layout based on required lighting outputs and sensors per code jurisdiction.
Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
L-23Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Featured Track Lighting @ Lobby
Breakfast and Market
Item Number: L-24
Item Quantity:
Manufacturer: Intense Lighting Source: Regency Lighting
Revision(s):
Contact: Jonathan Wehan
Phone: (800) 284-2024Fax:
Address: 3340 East La Palma AveAnaheim CA 92806-
Address: 9261 Jordan AvenueChatsworth CA 91311-
Contact: E-mail: jon.wehan@regencylighting.comE-mail: info@intenselighting.com
800#: (800) 284-2024
Web: www.regencylighting.comWeb: http://www.intenselighting.com/
Phone: (714) 630-9877Fax: (714) 630-9883
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: *Track Luminaire/ MXHG2- L2-30-24Color/Finish: *Varies/ See NotesSize/Dimensions: *Overall Dimensions: 6- 15/16" L x 5-1/2"H
Notes: *Refer to architectural drawings for locations.
Fixture to be used in conjunction with the Intense Lighting One Circuit Track Power Sytem.
Please Provide:At Breakfast Island: IS8- 8'-0" Track, Black Finish: (Qty 2) At Command Center Soffit: IS6- 6'-0" Track, Black Finish: (Qty 1) At Lobby Corridor/ Command Center Soffit: IS4 - 4'-0" Track, White Finish: (Qty 1)
Luminaire finish to match Track System.
Optional glare control accessories:S (Integral 1" Snoot)PFLMB-47 (Hex Louver)
Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Fixture MUST be UL listed.•
Tru by Hilton
L-24Page 1
13Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Featured Track Lighting @ Lobby
Breakfast and Market
Item Number: L-24
Item Quantity:
Manufacturer: Intense Lighting Source: Regency LightingInstructions:
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
L-24Page 2
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: LED Beam Light @ Breakfast BuffetItem Number: L-25
Item Quantity:
Manufacturer: Gammalux Lighting Systems Source: Regency Lighting
Revision(s):
Contact: Jonathan Wehan
Phone: (800) 284-2024Fax:
Address: 248 E. Arrow Hwy.San Dimas CA 91773-
Address: 9261 Jordan AvenueChatsworth CA 91311-
Contact:E-mail: jon.wehan@regencylighting.comE-mail: quotes@gammalux.com
800# : (800) 356-3275 800#: (800) 284-2024
Web: www.regencylighting.comWeb: www.gammalux.com
Phone:Fax: (909) 599-5288
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: *GB22D2-1SL358-120V-DVR-22'N-SF-ASLMDColor/Finish: *BlackSize/Dimensions: *2-1/8" W x 2-1/2"H - Length May Very - See Notes
Notes: *Refer to architectural drawings for mouting heights and location.
Total length to be one 22'-0" continuous, linear run. Light fixture is not to be mounted more than 6" away from wall on each side. Manufacturer to determine housing segments and hardware to connect each fixture run based on final field measurments.
Please use 1000/ft version
Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Fixture MUST be UL listed.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All quantities to be verified by hotel operator prior to purchasing.•Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
L-25Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural Specs
Area Name: Employee BreakroomItem Description: Pendant Lighting @ Dining TableItem Number: BOH-300
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOW
Revision(s):
Contact:
Phone:Fax:
Address:
Address:
Contact:E-mail:E-mail:Web:Web:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AB
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Dimmer: No dimming system
Lamp Type: LEDLamp Quantity: 1
Switch Type: Hardwired
Mounting Instructions: Bottom of fixture to be mounted at 54" A.F.F.
Notes: REQUIRED VENDORS:Aeris, Contact: Kerry Smith, P: 603-303-7189, email: kerrybaileysmith@gmail.com Renwil, Contact: Ryan Wilner, P: 514-367-1741, email: Ryan@renwil.com
Remington, Contact: Dave Mullin, P: 717.730.1002, email: dave.mullin@remingtonlamp.com
Project Light, Contact: Jenni Collier, P: 330.564.9014, email: jenni@projectlightinc.com
UL Listing: Fixture must be UL listed.
Instructions:Must be of contract quality and suitable for commercial use.•Manufacturer/Fabricator to verify installation method and hanging points.•Manufacturer/Fabricator to confirm weight of fixture.•Fixture must be U.L. approved.•Lamp(bulb) must be warm white, instant-start, flicker-free and yield 2700 Kelvin temperature and 1750 initial lumens.•All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
BOH-300Page 1
12Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural Specs
Area Name: Employee BreakroomItem Description: Pendant Lighting @ Dining TableItem Number: BOH-300
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOWInstructions:
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
BOH-300Page 2
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural Specs
Area Name: GuestroomsItem Description: Reading Lights @ BedsideItem Number: GR-300
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOW
Revision(s):
Contact:
Phone:Fax:
Address:
Address:
Contact:E-mail:E-mail:Web:Web:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AB
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Dimmer: NO Dimming System
Lamp Type: 2700K LEDLamp Wattage: 1 WattLamp Quantity: 1
Switch Type: One Rocker Switch at Mounting Plate
Notes: REQUIRED VENDORS:Aeris, Contact: Kerry Smith, P: 603-303-7189, email: kerrybaileysmith@gmail.com
Renwil, Contact: Ryan Wilner, P: 514-367-1741, email: Ryan@renwil.com
Remington, Contact: Dave Mullin, P: 717.730.1002, email: dave.mullin@remingtonlamp.com
Project Light, Contact: Jenni Collier, P: 330.564.9014, email: jenni@projectlightinc.com
UL Listing: Fixture must be UL listed
Instructions:Must be of contract quality and suitable for commercial use.•Manufacturer/Fabricator to verify installation method and hanging points.•Manufacturer/Fabricator to confirm weight of fixture.•Fixture must be U.L. approved.•Lamp(bulb) must be warm white, instant-start, flicker-free and yield 2700 Kelvin temperature and 1750 initial lumens.•All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
GR-300Page 1
13Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural Specs
Area Name: GuestroomsItem Description: Reading Lights @ BedsideItem Number: GR-300
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOWInstructions:
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
GR-300Page 2
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural Specs
Area Name: GuestroomsItem Description: Pendant Light @ Side ChairItem Number: GR-301
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOW
Revision(s):
Contact:
Phone:Fax:
Address:
Address:
Contact:E-mail:E-mail:Web:Web:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AB
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Dimmer: NO Dimming System
Lamp Type: LED A19 2700KLamp Wattage: 12W / 120 VoltageLamp Quantity: 1
Switch Type: Hardwired
Notes: REQUIRED VENDORS:Aeris, Contact: Kerry Smith, P: 603-303-7189, email: kerrybaileysmith@gmail.com
Renwil, Contact: Ryan Wilner, P: 514-367-1741, email: Ryan@renwil.com
Remington, Contact: Dave Mullin, P: 717.730.1002, email: dave.mullin@remingtonlamp.com
Project Light, Contact: Jenni Collier, P: 330.564.9014, email: jenni@projectlightinc.com
UL Listing: Fixture must be UL listed
Instructions:Must be of contract quality and suitable for commercial use.•Manufacturer/Fabricator to verify installation method and hanging points.•Manufacturer/Fabricator to confirm weight of fixture.•Fixture must be U.L. approved.•Lamp(bulb) must be warm white, instant-start, flicker-free and yield 2700 Kelvin temperature and 1750 initial lumens.•All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
GR-301Page 1
13Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural Specs
Area Name: GuestroomsItem Description: Pendant Light @ Side ChairItem Number: GR-301
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOWInstructions:
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
GR-301Page 2
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural Specs
Area Name: GuestroomsItem Description: Table Lamp @ TV LedgeItem Number: GR-302
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOW
Revision(s):
Contact:
Phone:Fax:
Address:
Address:
Contact:E-mail:E-mail:Web:Web:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AB
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Dimmer: NO dimming system
Lamp Type: LED 2700KLamp Wattage: 12w/120VLamp Quantity: 1
Switch Type: On/Off rocker at cordCord Color: Clear
Notes: REQUIRED VENDORS:Aeris, Contact: Kerry Smith, P: 603-303-7189, email: kerrybaileysmith@gmail.com
Renwil, Contact: Ryan Wilner, P: 514-367-1741, email: Ryan@renwil.com
Remington, Contact: Dave Mullin, P: 717.730.1002, email: dave.mullin@remingtonlamp.com
Project Light, Contact: Jenni Collier, P: 330.564.9014, email: jenni@projectlightinc.com
UL Listing: Fixture must be UL listed.
Instructions:Must be of contract quality and suitable for commercial use.•Manufacturer/Fabricator to verify installation method and hanging points.•Manufacturer/Fabricator to confirm weight of fixture.•Fixture must be U.L. approved.•Lamp(bulb) must be warm white, instant-start, flicker-free and yield 2700 Kelvin temperature and 1750 initial lumens.•
Tru by Hilton
GR-302Page 1
13Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural Specs
Area Name: GuestroomsItem Description: Table Lamp @ TV LedgeItem Number: GR-302
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOWInstructions:
All quantities to be verified by hotel operator prior to purchasing.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
GR-302Page 2
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural Specs
Area Name: GuestroomsItem Description: Wall Sconce @ Full-Length MirrorItem Number: GR-303
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOW
Revision(s):
Contact:
Phone:Fax:
Address:
Address:
Contact:E-mail:E-mail:Web:Web:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AB
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Dimmer: NO dimming system
Lamp Type: LED 2700KLamp Wattage: 15WLamp Quantity: Vendor to verify
Switch Type: Hardwired
Notes: REQUIRED VENDORS:Aeris, Contact: Kerry Smith, P: 603-303-7189, email: kerrybaileysmith@gmail.com
Renwil, Contact: Ryan Wilner, P: 514-367-1741, email: Ryan@renwil.com
Remington, Contact: Dave Mullin, P: 717.730.1002, email: dave.mullin@remingtonlamp.com
Project Light, Contact: Jenni Collier, P: 330.564.9014, email: jenni@projectlightinc.com
UL Listing: Fixture must be UL listed
Instructions:Must be of contract quality and suitable for commercial use.•Manufacturer/Fabricator to verify installation method and hanging points.•Manufacturer/Fabricator to confirm weight of fixture.•Fixture must be U.L. approved.•Lamp(bulb) must be warm white, instant-start, flicker-free and yield 2700 Kelvin temperature and 1750 initial lumens.•All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
GR-303Page 1
13Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural Specs
Area Name: GuestroomsItem Description: Wall Sconce @ Full-Length MirrorItem Number: GR-303
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOWInstructions:
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
GR-303Page 2
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural Specs
Area Name: Patio and Pool (OPTIONAL)Item Description: String Lights @ PergolaItem Number: OF-300
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Restoration Hardware- Contract Sales
Revision(s):
Contact: Todd Hilt
Phone: (312) 659-0686Fax:
Address:
Address: 15 Koch RoadSuite JCorte Madera CA 94925-
Contact:E-mail: thilt@rh.comE-mail:Web: www.restorationhardware.com/contract-salesWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AB
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Lamp Wattage: 100W total (5W max per bulb)Lamp Quantity: 20 per string
Switch Type: Plug-In
Notes: For outdoor applications - product must be connected to a Ground Fault Circuit Interrupting (GFCI) outlet. For seasonal use - not intended for permanent installation or use.
UL Listing: UL listed for outdoor & indoor use.
Instructions:Must be of contract quality and suitable for commercial use.•Manufacturer/Fabricator to verify installation method and hanging points.•Fixture must be U.L. approved. Manufacturer is responsible for submitting all technical specifications for fire safety, UL standards, and any other specifications that are required to comply with local and state fire codes.
•
Manufacturer to clearly mark each carton with item ID and specification number.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
OF-300Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural Specs
Area Name: Lobby
Item Description: Large Decorative Pendant @ Lounge Seating
Item Number: PA-300
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOW
Revision(s):
Contact:
Phone:Fax:
Address:
Address:
Contact:E-mail:E-mail:Web:Web:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AB
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Mounting Instructions: Bottom of fixture to be mounted at 89" A.F.F.
Notes: REQUIRED VENDORS:Aeris, Contact: Kerry Smith, P: 603-303-7189, email: kerrybaileysmith@gmail.com
Renwil, Contact: Ryan Wilner, P: 514-367-1741, email: Ryan@renwil.com
Remington, Contact: Dave Mullin, P: 717.730.1002, email: dave.mullin@remingtonlamp.com
Project Light, Contact: Jenni Collier, P: 330.564.9014, email: jenni@projectlightinc.com
Instructions:Must be of contract quality and suitable for commercial use.•Manufacturer/Fabricator to verify installation method and hanging points.•Manufacturer/Fabricator to confirm weight of fixture.•Fixture must be U.L. approved.•All quantities to be verified by hotel operator prior to purchasing.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
PA-300Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural Specs
Area Name: Lobby
Item Description: Small Decorative Pendant @Lounge Seating
Item Number: PA-301
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOW
Revision(s):
Contact:
Phone:Fax:
Address:
Address:
Contact:E-mail:E-mail:Web:Web:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AB
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Mounting Instructions: Bottom of fixture to be mounted at 97" A.F.F.
Notes: REQUIRED VENDORS:Aeris, Contact: Kerry Smith, P: 603-303-7189, email: kerrybaileysmith@gmail.com
Renwil, Contact: Ryan Wilner, P: 514-367-1741, email: Ryan@renwil.com
Remington, Contact: Dave Mullin, P: 717.730.1002, email: dave.mullin@remingtonlamp.com
Project Light, Contact: Jenni Collier, P: 330.564.9014, email: jenni@projectlightinc.com
Instructions:Must be of contract quality and suitable for commercial use.•Manufacturer/Fabricator to verify installation method and hanging points.•Manufacturer/Fabricator to confirm weight of fixture.•Fixture must be U.L. approved.•All quantities to be verified by hotel operator prior to purchasing.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
PA-301Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural Specs
Area Name: Lobby
Item Description: Pendant Light @ Banquette Bench and Work Alcove
Item Number: PA-303
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOW
Revision(s):
Contact:
Phone:Fax:
Address:
Address:
Contact:E-mail:E-mail:Web:Web:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AB
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Dimmer: No Dimming System
Lamp Type: LEDLamp Wattage: 10-15W 120V A19 2700KLamp Quantity: 1
Switch Type: Hardwired
Notes: REQUIRED VENDORS:Aeris, Contact: Kerry Smith, P: 603-303-7189, email: kerrybaileysmith@gmail.com Renwil, Contact: Ryan Wilner, P: 514-367-1741, email: Ryan@renwil.com
Remington, Contact: Dave Mullin, P: 717.730.1002, email: dave.mullin@remingtonlamp.com
Project Light, Contact: Jenni Collier, P: 330.564.9014, email: jenni@projectlightinc.com
UL Listing: Fixture must be UL Listed
Instructions:Must be of contract quality and suitable for commercial use.•Manufacturer/Fabricator to verify installation method and hanging points.•Manufacturer/Fabricator to confirm weight of fixture.•Fixture must be U.L. approved.•Lamp(bulb) must be warm white, instant-start, flicker-free and yield 2700 Kelvin temperature and 1750 initial lumens.•
Tru by Hilton
PA-303Page 1
13Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural Specs
Area Name: Lobby
Item Description: Pendant Light @ Banquette Bench and Work Alcove
Item Number: PA-303
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOWInstructions:
All quantities to be verified by hotel operator prior to purchasing.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
PA-303Page 2
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural Specs
Area Name: LobbyItem Description: Pendant Light @ Paper Airplane MobileItem Number: PA-304
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOW
Revision(s):
Contact:
Phone:Fax:
Address:
Address:
Contact:E-mail:E-mail:Web:Web:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AB
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Dimmer: No dimming system
Lamp Type: LEDLamp Wattage: 10-15W 120V A19 2700KLamp Quantity: 5
Switch Type: Hardwired
Notes: Required Vendors:Renwil, Contact: Ryan Wilner, P: 514-367-1741, email: Ryan@renwil.com
Remington, Contact: Dave Mullin, P: 717.730.1002, email: dave.mullin@remingtonlamp.com
Aeris, Contact: Kerry Smith, P: 603-303-7189, email: kerrybaileysmith@gmail.com
Project Light, Contact: Jenni Collier, P: 330.564.9014, email: jenni@projectlightinc.com
UL Listing: Fixture must be UL Listed
Instructions:Must be of contract quality and suitable for commercial use.•Manufacturer/Fabricator to verify installation method and hanging points.•Manufacturer/Fabricator to confirm weight of fixture.•Fixture must be U.L. approved.•Lamp(bulb) must be warm white, instant-start, flicker-free and yield 2700 Kelvin temperature and 1750 initial lumens.•All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PA-304Page 1
12Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural Specs
Area Name: LobbyItem Description: Pendant Light @ Paper Airplane MobileItem Number: PA-304
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOWInstructions:
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
PA-304Page 2
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural Specs
Area Name: Lobby
Item Description: Linear Ceiling Mounted Lights @ Corridor
Item Number: PA-305
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOW
Revision(s):
Contact:
Phone:Fax:
Address:
Address:
Contact:E-mail:E-mail:Web:Web:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AB
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Dimmer: No dimming system
Lamp Type: LEDLamp Wattage: 120V 18watts 2700K
Switch Type: Hardwired
Notes: REQUIRED VENDORS:Aeris, Contact: Kerry Smith, P: 603-303-7189, email: kerrybaileysmith@gmail.com Renwil, Contact: Ryan Wilner, P: 514-367-1741, email: Ryan@renwil.com
Remington, Contact: Dave Mullin, P: 717.730.1002, email: dave.mullin@remingtonlamp.com
Project Light, Contact: Jenni Collier, P: 330.564.9014, email: jenni@projectlightinc.com
UL Listing: Fixture must be UL listed
Instructions:Must be of contract quality and suitable for commercial use.•Manufacturer/Fabricator to verify installation method and hanging points.•Manufacturer/Fabricator to confirm weight of fixture.•Fixture must be U.L. approved.•Lamp(bulb) must be warm white, instant-start, flicker-free and yield 2700 Kelvin temperature and 1750 initial lumens.•All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PA-305Page 1
13Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural Specs
Area Name: Lobby
Item Description: Linear Ceiling Mounted Lights @ Corridor
Item Number: PA-305
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOWInstructions:
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
PA-305Page 2
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural Specs
Area Name: Lobby
Item Description: Ceiling Mounted Lights (Large) @ Elevator Lobby and Command Center
Item Number: PA-306
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOW
Revision(s):
Contact:
Phone:Fax:
Address:
Address:
Contact:E-mail:E-mail:Web:Web:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AB
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Dimmer: No dimming system
Lamp Type: LED 2700K 120VSwitch Type: Hardwired
Notes: REQUIRED VENDORS:Aeris, Contact: Kerry Smith, P: 603-303-7189, email: kerrybaileysmith@gmail.com Renwil, Contact: Ryan Wilner, P: 514-367-1741, email: Ryan@renwil.com
Remington, Contact: Dave Mullin, P: 717.730.1002, email: dave.mullin@remingtonlamp.com
Project Light, Contact: Jenni Collier, P: 330.564.9014, email: jenni@projectlightinc.com
UL Listing: Fixture must be UL Listed
Instructions:Must be of contract quality and suitable for commercial use.•Manufacturer/Fabricator to verify installation method and hanging points.•Manufacturer/Fabricator to confirm weight of fixture.•Fixture must be U.L. approved.•Lamp(bulb) must be warm white, instant-start, flicker-free and yield 2700 Kelvin temperature and 1750 initial lumens.•All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PA-306Page 1
13Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural Specs
Area Name: Lobby
Item Description: Ceiling Mounted Lights (Large) @ Elevator Lobby and Command Center
Item Number: PA-306
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOWInstructions:
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
PA-306Page 2
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural Specs
Area Name: Lobby
Item Description: Ceiling Mounted Lights (Small) @ Elevator Lobby
Item Number: PA-307
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOW
Revision(s):
Contact:
Phone:Fax:
Address:
Address:
Contact:E-mail:E-mail:Web:Web:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AB
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Dimmer: No Dimming System
Lamp Type: LED 2700K 120VSwitch Type: Hardwired
Notes: REQUIRED VENDORS:Aeris, Contact: Kerry Smith, P: 603-303-7189, email: kerrybaileysmith@gmail.com Renwil, Contact: Ryan Wilner, P: 514-367-1741, email: Ryan@renwil.com
Remington, Contact: Dave Mullin, P: 717.730.1002, email: dave.mullin@remingtonlamp.com
Project Light, Contact: Jenni Collier, P: 330.564.9014, email: jenni@projectlightinc.com
UL Listing: Fixture must be UL Listed
Instructions:Must be of contract quality and suitable for commercial use.•Manufacturer/Fabricator to verify installation method and hanging points.•Manufacturer/Fabricator to confirm weight of fixture.•Fixture must be U.L. approved.•Lamp(bulb) must be warm white, instant-start, flicker-free and yield 2700 Kelvin temperature and 1750 initial lumens.•All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PA-307Page 1
13Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural Specs
Area Name: Lobby
Item Description: Ceiling Mounted Lights (Small) @ Elevator Lobby
Item Number: PA-307
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOWInstructions:
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
PA-307Page 2
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural Specs
Area Name: LobbyItem Description: Wall Sconce @ Public RestroomsItem Number: PA-308
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOW
Revision(s):
Contact:
Phone:Fax:
Address:
Address:
Contact:E-mail:E-mail:Web:Web:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AB
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Dimmer: No dimming system
Lamp Type: LED, 3000KLamp Wattage: 22 wattLamp Quantity: 1
Switch Type: Hardwired
Notes: REQUIRED VENDORS:Aeris, Contact: Kerry Smith, P: 603-303-7189, email: kerrybaileysmith@gmail.com Renwil, Contact: Ryan Wilner, P: 514-367-1741, email: Ryan@renwil.com
Remington, Contact: Dave Mullin, P: 717.730.1002, email: dave.mullin@remingtonlamp.com
Project Light, Contact: Jenni Collier, P: 330.564.9014, email: jenni@projectlightinc.com
UL Listing: Fixture must be UL Listed.
Instructions:Must be of contract quality and suitable for commercial use.•Manufacturer/Fabricator to verify installation method and hanging points.•Manufacturer/Fabricator to confirm weight of fixture.•Fixture must be U.L. approved.•Lamp(bulb) must be warm white, instant-start, flicker-free and yield 2700 Kelvin temperature and 1750 initial lumens.•All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PA-308Page 1
13Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural Specs
Area Name: LobbyItem Description: Wall Sconce @ Public RestroomsItem Number: PA-308
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOWInstructions:
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
PA-308Page 2
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Metal Powdercoat Finish @ Millwork &
Trellis Jointery
Item Number: M-01
Item Quantity:
Manufacturer: To Bid Source: To Bid
Revision(s):
Contact:
Phone:Fax:
Address:
Address:
Contact:E-mail:E-mail:Web:Web:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Powdercoat finish to match Tiger Drylac Statuary Bronze 038/60080
Size/Dimensions: Refer to architectural drawings for details and dimensions.
Instructions:Quanties to be verified by installer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Tru by Hilton
M-01Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Metal Finish @ Elevator Doors, Walls,
Ceiling, Skirting, and Handrails
Item Number: M-04
Item Quantity:
Manufacturer: To Bid Source: To Bid
Revision(s):
Contact:
Phone:Fax:
Address:
Address:
Contact:E-mail:E-mail:Web:Web:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: MM
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Color/Finish: *Brushed Stainless SteelSize/Dimensions: *Refer to architectural drawings for dimensions and
locations.
Notes: *Coordinate material sizes with elevator cab manufacturer.
Instructions:Quanties to be verified by installer.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•
Tru by Hilton
M-04Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Wall Mounted Mirror @ Fitness CenterItem Number: MIR-01
Item Quantity:
Manufacturer: To Bid Source: To Bid
Revision(s):
Contact:
Phone:Fax:
Address:
Address:
Contact:E-mail:E-mail:Web:Web:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication:
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Polished Plate Glass MirrorColor/Finish: Polished - must be free of distortionSize/Dimensions: 48" x 96" panel; 4mm-6mm thickness
Notes: Mirrors must be 8mm-6mm thickness with vinyl backing/vinyl back.
Installed mirror panels to butt together flush for seamless look. Installer must provide appropriate mounting hardware for wall condition and weight of mirror.
Aluminum J-Channel trim at exposed top and bottom edges of mirror panels - 1" profile. Refer to architectural drawings for locations and mounting heights.
Instructions:All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Must be of contract quality and suitable for commercial use.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Tru by Hilton
MIR-01Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural Specs
Area Name: GuestroomsItem Description: Illuminated Mirror @ Guest BathItem Number: GR-600
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOW
Revision(s):
Contact:
Phone:Fax:
Address:
Address:
Contact:E-mail:E-mail:Web:Web:
Phone:Fax:
Description: Custom back-lit illuminated mirror with 2" lit side panels and 1" wide frame. Fixture to be plug-in with flat (right angled) plug.
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AB
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Notes: Mirror to be plugged into wall outlet, above vanity. Provide flat (right angled) plug head.
Lamp types to be LED 3000K temperature.
REQUIRED VENDORS:Electric Mirror, Contact: Doug Finefrock, P: 425- 404-3715, email: Doug@electricmirror.com
Majestic Mirror, Contact: Josh Mandel, P: 305-827-2661 x 108, email: Josh@majesticmirror.com
Aeris, Contact: Kerry Smith, P: 603-303-7189, email:kerrybaileysmith@gmail.com
Project Light, Contact: Jenni Collier, P: 330.564.9014, email: jenni@projectlightinc.com
Instructions:Must be of contract quality and suitable for commercial use.•Provide all parts, pieces, and instructions for complete installation. Mounting method to be sufficient for weight of piece.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Manufacturer to clearly mark each carton with item ID and specification number.•All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
GR-600Page 1
13Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural Specs
Area Name: GuestroomsItem Description: Illuminated Mirror @ Guest BathItem Number: GR-600
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOWInstructions:
All interpretations of the specification MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Show all pieces in scaled shop drawings. Entire fixture shall be inspected during the manufacturing and again afterfinal assembly.
•
Manufacturer/Fabricator to verify installation method and hanging points.•Manufacturer/Fabricator to confirm weight of fixture.•Fixture must be U.L. Listed and so labeled. Manufacturer is responsible for submitting all technical specifications forfire safety, UL standards, and any other specifications that are required to comply with local and state fire codes.
•
All pieces must be crated for shipping. All corners should be wrapped with corner guards. Crates should be labeled with instructions for shipment, storage, and opening of crate.
•
Manufacturer to provide security mounting and hardware.•
Tru by Hilton
GR-600Page 2
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural Specs
Area Name: Guestrooms
Item Description: Illuminated Mirror @ Accessible Guest Bath
Item Number: GR-602
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOW
Revision(s):
Contact:
Phone:Fax:
Address:
Address:
Contact:E-mail:E-mail:Web:Web:
Phone:Fax:
Description: Custom back-lit illuminated mirror with 2" lit side panels and 1" wide frame. Fixture to be plug-in with flat (right angled) plug.
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AB
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Notes: Mirror to be plugged into wall outlet, above vanity. Provide flat (right angled) plug head.
Lamp types to be LED 3000K temperature.
REQUIRED VENDORS:Electric Mirror, Contact: Doug Finefrock, P: 425- 404-3715, email: Doug@electricmirror.com
Majestic Mirror, Contact: Josh Mandel, P: 305-827-2661 x 108, email: Josh@majesticmirror.com
Aeris, Contact: Kerry Smith, P: 603-303-7189, email: kerrybaileysmith@gmail.com
Project Light, Contact: Jenni Collier, P: 330.564.9014, email: jenni@projectlightinc.com
Instructions:Must be of contract quality and suitable for commercial use.•Provide all parts, pieces, and instructions for complete installation. Mounting method to be sufficient for weight of piece.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Manufacturer to clearly mark each carton with item ID and specification number.•
Tru by Hilton
GR-602Page 1
13Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural Specs
Area Name: Guestrooms
Item Description: Illuminated Mirror @ Accessible Guest Bath
Item Number: GR-602
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: SEE 'NOTES' BELOWInstructions:
All quantities to be verified by hotel operator prior to purchasing.•All interpretations of the specification MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Show all pieces in scaled shop drawings. Entire fixture shall be inspected during the manufacturing and again afterfinal assembly.
•
Manufacturer/Fabricator to verify installation method and hanging points.•Manufacturer/Fabricator to confirm weight of fixture.•Fixture must be U.L. Listed and so labeled. Manufacturer is responsible for submitting all technical specifications forfire safety, UL standards, and any other specifications that are required to comply with local and state fire codes.
•
All pieces must be crated for shipping. All corners should be wrapped with corner guards. Crates should be labeled with instructions for shipment, storage, and opening of crate.
•
Manufacturer to provide security mounting and hardware.•
Tru by Hilton
GR-602Page 2
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Toilet @ Guest Bath (OPTION A)Item Number: PF-01-A
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Kohler Company
Revision(s):
Contact: Doug Johnston
Phone:Fax:
Address:
Address: 444 Highland DriveKohler WI 53044-
Contact:E-mail: douglas.johnston@kohler.comE-mail:Web: ww.kohler.comWeb:
Mobile: (972) 342-8026Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Description: 1.6 gpf full flush and 1.0 partial flushVitreous China
Dimensions: 14-5/16"W x 28-1/8"D x 30-1/2"H
Notes: *Purchase the following separately:
K-4008-0 Brevia Q2 Advantage Toilet Seat(toilet lid is only required at Guestroom locations)Premier: #283038 Heavy Duty Open Front Elongated Plastic Toilet Seat w/ Lid(toilet lid is only required at Guestroom locations)
Color/Finish: White
Model Number: K-4441-0/ K-4353-0Model Name: Persuade Enlongated Bowl and Curve Dual Flush
Toilet
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-01-APage 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Toilet @ Guest Bath (OPTION C)Item Number: PF-01-C
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Gerber Plumbing Fixtures
Revision(s):
Contact:
Phone: (630) 679-1420Fax:
Address:
Address: 2500 Internationale PkwyWoodridge IL 60517-
Contact:E-mail:E-mail:Web: gerberonline.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Description: Two piece toilet with concealed trapwaySingle flush, 1.28 GPFVitreous china
Dimensions: 28"D x 16-1/8"W x 31-3/8"H
Notes: Please purchase the following separately:
Premier: #283038/793576 Heavy- Duty Plastic Toilet seat, Enlongated, Open front with Lid. Color:White (toilet lid is only required at Guestroom locations)
Color/Finish: White
Model Number: 20-832Model Name: Avalanche Enlongated Ergoheight Toilet
Instructions:Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-01-CPage 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Toilet @ Guest Bath (OPTION D)Item Number: PF-01-D
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: American Standard
Revision(s):
Contact: Mark Terrel
Phone: (937) 603-8501Fax: (937) 845-2366
Address:
Address: P.O. Box 68201 Centennial PlazaPiscataway NJ 08855-6820
Contact:E-mail: terrelm@americanstandard.comE-mail:
800#: (800) 442-1902
Web: www.americanstandard-us.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Description: High Efficency, 1.28 GPF; Clean DesignConcealed TrapwayVitreous China
Dimensions: 15-3/4"W x 30-1/4"D x 30-3/4"H
Notes: Toilet seat and lid are included - item #5350.11 Cadet Pro Seat(toilet lid is only required at Guestroom locations).
Color/Finish: White 020
Model Number: 2514.101Model Name: Cadet 3 Elongated 1.28 GPF Toilet
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-01-DPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: 34" x 48" Shower Pan @ Guest Bath
(OPTION A)
Item Number: PF-02-A
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Sterling
Revision(s):
Contact: Doug Johnston
Phone:Fax:
Address:
Address: A Kohler Company444 Highland DriveKohler WI 53044-
Contact:E-mail: douglas.johnston@kohler.comE-mail:
800#: (800) 783-7546
Web: www.sterlingplumbing.comWeb:
Mobile: (972) 342-8026Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Dimensions: 34"D x 48"W x 4-1/2"HColor/Finish: White
Model Number: 72121100Model Name: Esemble 34" x 48" Center Drain Shower Pan
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-02-APage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: 34" x 48" Shower Pan @ Guest Bath
(OPTION B)
Item Number: PF-02-B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Bootz Industries
Revision(s):
Contact:
Phone: (812) 423-5401Fax: (812) 429-2254
Address:
Address: 1400 Park StreetPO Box 18010Evansville IN 47719-
Contact:E-mail:E-mail:Web: www.bootz.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Dimensions: 48"W x 34"D x 7-1/4"HColor/Finish: White
Model Number: 4834PANModel Name: 48 x34 Shower Pan
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-02-BPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: 34" x 48" Shower Pan @ Guest Bath
(OPTION C)
Item Number: PF-02-C
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Mincey Marble Manufacturing Inc.
Revision(s):
Contact: Donna Mincey
Phone: (678) 997-2770Fax: (770) 531-0935
Address:
Address: 4321 Browns Bridge Rd.Gainesville GA 30504-
Contact:E-mail: dmincey@minceymarble.comE-mail:
800#: (800) 533-1806
Web: www.minceymarble.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Description: Lightly textured, non-slip floor surfaceCenter drain cutout (drain is NOT included)
Dimensions: 34"D x 48"W x 3-1/2"HColor/Finish: 2250 Solid White
Model Number: SP-3448-C/IFModel Name: 34" x 48" Standard Rectangle Shower Pan w/ Center
Drain
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-02-CPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: 34" x 48" Shower Pan @ Guest Bath
(OPTION D)
Item Number: PF-02-D
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: MPL Corporation
Revision(s):
Contact: Jennifer Heath
Phone: (317) 835-9000Fax: (317) 835-3050
Address:
Address: 203 N. Edgerton StreetFairland IN 46126-
Contact:E-mail: jheath@mpl-corp.comE-mail:Web: www.mpl-corp.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Dimensions: 47-3/4"W x 34"D x 4"HColor/Finish: Bright White
Model Name: 48" x 34" Center Drain Shower Pan
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-02-DPage 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Sink Basin @ Guest Bath (OPTION A)Item Number: PF-03-A
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Sterling
Revision(s):
Contact: Doug Johnston
Phone:Fax:
Address:
Address: A Kohler Company444 Highland DriveKohler WI 53044-
Contact:E-mail: douglas.johnston@kohler.comE-mail:
800#: (800) 783-7546
Web: www.sterlingplumbing.comWeb:
Mobile: (972) 342-8026Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Dimensions: 18"W x 12"D x 7-1/8"H
Notes: Plumbing contractor MUST coordinate with casegood FF&E vendor to ensure faucet fixture and sink basin fit within vanity base.
Color/Finish: White
Model Number: 442007-U-0Model Name: Sterling Stinson Undermount Sink Basin
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-03-APage 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Sink Basin @ Guest Bath (OPTION B)Item Number: PF-03-B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: American Standard
Revision(s):
Contact: Mark Terrel
Phone: (937) 603-8501Fax: (937) 845-2366
Address:
Address: P.O. Box 68201 Centennial PlazaPiscataway NJ 08855-6820
Contact:E-mail: terrelm@americanstandard.comE-mail:
800#: (800) 442-1902
Web: www.americanstandard-us.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Dimensions: OVERALL DIMENSIONS: 17-1/8"W x 14-1/8"D x 7-1/2"H
Notes: Plumbing contractor MUST coordinate with casegood FF&E vendor to ensure faucet fixture and sink basin fit within vanity base.
Color/Finish: White
Model Number: 0495.221.020Model Name: Ovalyn Undercounter Sink
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-03-BPage 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Sink Faucet @ Guest Bath (OPTION A)Item Number: PF-04-A
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Kohler Company
Revision(s):
Contact: Doug Johnston
Phone:Fax:
Address:
Address: 444 Highland DriveKohler WI 53044-
Contact:E-mail: douglas.johnston@kohler.comE-mail:Web: ww.kohler.comWeb:
Mobile: (972) 342-8026Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Description: Single lever handle allows for both on/off activation and temperature setting.1.5 GPM flow rate.Single hole installation
Dimensions: 1-3/4"W x 5-11/16"L x 4-3/4"H
Notes: Plumbing contractor MUST coordinate with casegood FF&E vendor to ensure faucet fixture and sink basin fit within vanity base.
Color/Finish: Polished Chrome
Model Number: K-99760-4-CPModel Name: Honesty
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-04-APage 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Sink Faucet @ Guest Bath (OPTION B)Item Number: PF-04-B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Grohe
Revision(s):
Contact: Jennifer Humphrey
Phone: (312) 918-8142Fax:
Address:
Address: 200 N. Gary Avenue, Suite GRoselle IL 60172-
Contact:E-mail: jennifer.humphrey@grohe.comE-mail:
800#: (800) 444-7649
Web: www.grohe.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Description: 1.5 GPM max flow rateSingle hole installation
Dimensions: 2-1/8"W x 4"D x 7-5/16"H
Notes: Plumbing contractor MUST coordinate with casegood FF&E vendor to ensure faucet fixture and sink basin fit within vanity base.
Color/Finish: Polished Chrome
Model Number: 23129-000Model Name: Eurocube Lavatory Centerset
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-04-BPage 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Sink Faucet @ Guest Bath (OPTION C)Item Number: PF-04-C
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Moen Inc.
Revision(s):
Contact: Jason Reynolds
Phone:Fax: (800) 628-0894
Address:
Address: 25300 Al Moen DriveNorth Olmsted OH 44070 United States of America
Contact:E-mail:E-mail:
800#: (800) 289-6636
Web: www.moenpro.comWeb:
Mobile: (407) 340-3249Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Description: 1.2 GPM flow rateSingle hole installation
Dimensions: 4.998"L x 4.893"H
Notes: Plumbing contractor MUST coordinate with casegood FF&E vendor to ensure faucet fixture and sink basin fit within vanity base.
Color/Finish: Polished Chrome
Model Number: 6191Model Name: Align Single -Handle Faucet
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-04-CPage 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Sink Faucet @ Guest Bath (OPTION D)Item Number: PF-04-D
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Speakman- Stephanie Weston
Revision(s):
Contact: Stephanie P. Weston
Phone: (302) 765-0227Fax:
Address:
Address: 400 Anchor Mill RoadNew Castle DE 19720-
Contact:E-mail: sweston@speakmancompany.comE-mail:Web: www.speakmancompany.comWeb:
Mobile: (382) 367-2407Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Description: Lead-free brass construction1.2 GPM flow rateSingle hole installation
Dimensions: 5"L x 6-57/64"H x 1-3/4"W
Notes: Plumbing contractor MUST coordinate with casegood FF&E vendor to ensure faucet fixture and sink basin fit within vanity base.
Color/Finish: Polished Chrome
Model Number: SB-1003-EModel Name: Neo Single Lever Faucet
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-04-DPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Shower Head @ Guest Bath (OPTION
A)
Item Number: PF-05-A
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Kohler Company
Revision(s):
Contact: Doug Johnston
Phone:Fax:
Address:
Address: 444 Highland DriveKohler WI 53044-
Contact:E-mail: douglas.johnston@kohler.comE-mail:Web: ww.kohler.comWeb:
Mobile: (972) 342-8026Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Dimensions: *4-5/16"W x 2-7/8"H
Notes: Wall mount installation. Manufacturer to provide all parts required for assembly and installation. All exposed pieces to be polished chrome finish.
Refer to architectural drawings for location and mounting heights.
Please purchase the following separately:K-7395-CP- Shower Arm and Flange
Color/Finish: Polished Chrome
Model Number: *K-72419-CPModel Name: *Awaken G110 2.0 gpm Multi-Function Showerhead
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-05-APage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Shower Head @ Guest Bath (OPTION
B)
Item Number: PF-05-B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Grohe
Revision(s):
Contact: Jennifer Humphrey
Phone: (312) 918-8142Fax:
Address:
Address: 200 N. Gary Avenue, Suite GRoselle IL 60172-
Contact:E-mail: jennifer.humphrey@grohe.comE-mail:
800#: (800) 444-7649
Web: www.grohe.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Description: 2.0 GPM flow rateDimensions: 3-15/16"W x 3-5/16"D
Notes: Wall mount installation. Manufacturer to provide all parts required for assembly and installation. All exposed pieces to be polished chrome finish.
Refer to architectural drawings for location and mounting heights.
Please purchase the following separately:27414-000- Tubular Shower Arm and Flange
Color/Finish: 000 Polished Chrome
Model Number: *26366-000Model Name: New Tempesta Cosmopolitian 100
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-05-BPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Shower Head @ Guest Bath (OPTION
C)
Item Number: PF-05-C
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Moen Inc.
Revision(s):
Contact: Jason Reynolds
Phone:Fax: (800) 628-0894
Address:
Address: 25300 Al Moen DriveNorth Olmsted OH 44070 United States of America
Contact:E-mail:E-mail:
800#: (800) 289-6636
Web: www.moenpro.comWeb:
Mobile: (407) 340-3249Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Description: 2.0 GPMDimensions: 4-3/8"W x 2-9/16"D
Notes: Wall mount installation. Manufacturer to provide all parts required for assembly and installation. All exposed pieces to be polished chrome finish.
Refer to architectural drawings for location and mounting heights.
Please purchase the following separately:Shower Arm and Flange (T2192-NH)
Color/Finish: Chrome
Model Number: 3638EPModel Name: 4 Function Shower Head
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-05-CPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Shower Head @ Guest Bath (OPTION
D)
Item Number: PF-05-D
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Speakman- Stephanie Weston
Revision(s):
Contact: Stephanie P. Weston
Phone: (302) 765-0227Fax:
Address:
Address: 400 Anchor Mill RoadNew Castle DE 19720-
Contact:E-mail: sweston@speakmancompany.comE-mail:Web: www.speakmancompany.comWeb:
Mobile: (382) 367-2407Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Dimensions: 3.6" x 4.8" x 3.6"
Notes: Wall mount installation. Manufacturer to provide all parts required for assembly and installation. All exposed pieces to be polished chrome finish.
Refer to architectural drawings for location and mounting heights.
Purchase the Following Separately:S-2540 Neo Arm and Flange
Color/Finish: Polished Chrome
Model Number: S-3010Model Name: Neo 2.5 GPM Multi Function Shower Head
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-05-DPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Shower Controls @ Guest Bath
(OPTION A)
Item Number: PF-06-A
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Kohler Company
Revision(s):
Contact: Doug Johnston
Phone:Fax:
Address:
Address: 444 Highland DriveKohler WI 53044-
Contact:E-mail: douglas.johnston@kohler.comE-mail:Web: ww.kohler.comWeb:
Mobile: (972) 342-8026Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Dimensions: 6-1/2"W x 4-1/2"D
Notes: Manufacturer to provide all parts required for assembly and installation. All exposed pieces to be polished chrome finish.
Refer to architectural drawings for location and mounting heights.
Please purchase the following separately:Model #K-304-KS Rite Temp Pressure Balancing Valve
Color/Finish: CP- Polished Chrome
Model Number: *K-T99761-4-CPModel Name: Honesty Rite Temp Trim and Valve
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-06-APage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Shower Controls @ Guest Bath
(OPTION B)
Item Number: PF-06-B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Grohe
Revision(s):
Contact: Jennifer Humphrey
Phone: (312) 918-8142Fax:
Address:
Address: 200 N. Gary Avenue, Suite GRoselle IL 60172-
Contact:E-mail: jennifer.humphrey@grohe.comE-mail:
800#: (800) 444-7649
Web: www.grohe.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Dimensions: 6-11/16"W x 7-1/4"H x 2-15/16"- 3-3/4"D
Notes: Manufacturer to provide all parts required for assembly and installation. All exposed pieces to be polished chrome finish.
Refer to architectural drawings for location and mounting heights.
Please purchase the following separately:Model #35026 Universal Rough In Box
Color/Finish: 000- Chrome
Model Number: 19866-000 / 35026-00Model Name: Atrio Single Function Trim
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-06-BPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Shower Controls @ Guest Bath
(OPTION C)
Item Number: PF-06-C
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Moen Inc.
Revision(s):
Contact: Jason Reynolds
Phone:Fax: (800) 628-0894
Address:
Address: 25300 Al Moen DriveNorth Olmsted OH 44070 United States of America
Contact:E-mail:E-mail:
800#: (800) 289-6636
Web: www.moenpro.comWeb:
Mobile: (407) 340-3249Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Dimensions: 7"DIA x 3-21/32"D
Notes: Manufacturer to provide all parts required for assembly and installation. All exposed pieces to be polished chrome finish.
Refer to architectural drawings for location and mounting heights.
Color/Finish: Polished Chrome
Model Number: T2191 / 62370Model Name: Align Trim and Valve
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-06-CPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Shower Controls @ Guest Bath
(OPTION D)
Item Number: PF-06-D
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Speakman- Stephanie Weston
Revision(s):
Contact: Stephanie P. Weston
Phone: (302) 765-0227Fax:
Address:
Address: 400 Anchor Mill RoadNew Castle DE 19720-
Contact:E-mail: sweston@speakmancompany.comE-mail:Web: www.speakmancompany.comWeb:
Mobile: (382) 367-2407Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Dimensions: 7" DIA x 3-1/2"D x 2" DIA(handle)
Notes: Manufacturer to provide all parts required for assembly and installation. All exposed pieces to be polished chrome finish.
Refer to architectural drawings for location and mounting heights.
Color/Finish: Polished Chrome
Model Number: SM-1000-PModel Name: Neo
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-06-DPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Sink Basin @ Employee Breakroom
(OPTION A)
Item Number: PF-07-A
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Sterling
Revision(s):
Contact: Doug Johnston
Phone:Fax:
Address:
Address: A Kohler Company444 Highland DriveKohler WI 53044-
Contact:E-mail: douglas.johnston@kohler.comE-mail:
800#: (800) 783-7546
Web: www.sterlingplumbing.comWeb:
Mobile: (972) 342-8026Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Dimensions: 24-1/2"W x 21-1/2"D x 6-1/2"H (Bowl Depth)Color/Finish: Stainless Steel
Model Number: 11403-4-NAModel Name: Sterling Southhaven Top- Mount Kitchen Sink
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-07-APage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Sink Basin @ Employee Breakroom
(OPTION B)
Item Number: PF-07-B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Elkay Manufacturing
Revision(s):
Contact:
Phone: (630) 574-8484Fax:
Address:
Address: 2222 Camden CourtOak Brook IL 60523-
Contact:E-mail: consumer@elkay.comE-mail:Web: www.elkay.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Dimensions: 25"W x 21-1/4"D x 5-3/8"HColor/Finish: Stainless Steel
Model Number: GE12521Model Name: Dayton Stainless Steel Single Bowl Top-Mount Sink
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-07-BPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Sink Faucet @ Employee Breakroom
(OPTION A)
Item Number: PF-08-A
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Kohler Company
Revision(s):
Contact: Doug Johnston
Phone:Fax:
Address:
Address: 444 Highland DriveKohler WI 53044-
Contact:E-mail: douglas.johnston@kohler.comE-mail:Web: ww.kohler.comWeb:
Mobile: (972) 342-8026Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Description: 10" Spout ReachDimensions: 6-3/8"W x 10"D (spout reach) x 9-7/8"H (handle fully
opened)Color/Finish: Polished Chrome
Model Number: K-15171-FL-CPModel Name: Coralais Three Hole Kitchen Sink Faucet
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-08-APage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Sink Faucet @ Employee Breakroom
(OPTION B)
Item Number: PF-08-B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: American Standard
Revision(s):
Contact: Mark Terrel
Phone: (937) 603-8501Fax: (937) 845-2366
Address:
Address: P.O. Box 68201 Centennial PlazaPiscataway NJ 08855-6820
Contact:E-mail: terrelm@americanstandard.comE-mail:
800#: (800) 442-1902
Web: www.americanstandard-us.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Dimensions: 10"W x 9-1/4" (spout reach) x 7-1/2"H (handle closed)
Color/Finish: Polished Chrome
Model Number: 4205.000.002Model Name: Reliant Single Control Kitchen Faucet
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-08-BPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Sink Faucet @ Employee Breakroom
(OPTION C)
Item Number: PF-08-C
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Premier Faucet
Revision(s):
Contact: Tom Bierlein
Phone: (904) 248-8347Fax:
Address:
Address:Jacksonville FL 32204-
Contact:E-mail: tbierlein@interlinebrands.comE-mail:
800#: (866) 745-4010
Web: www.premierfaucet.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Dimensions: 10-3/8"D (spout reach) x 10-1/8"W x 7-3/8" (handle closed)
Color/Finish: Chrome
Model Number: 106171 / 752274Model Name: Westlake Single Lever Kitchen Faucet
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-08-CPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Hand Shower and Diverter Control
Combo @ Accessible Guest Bath Roll-in Shower (OPTION A)
Item Number: PF-09-A
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Kohler Company
Revision(s):
Contact: Doug Johnston
Phone:Fax:
Address:
Address: 444 Highland DriveKohler WI 53044-
Contact:E-mail: douglas.johnston@kohler.comE-mail:Web: ww.kohler.comWeb:
Mobile: (972) 342-8026Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Description: Includes:Awaken G110 Multifunction Handshower36" Slidebar60" Metal Hose
Dimensions: 3-5/8" x 4-5/16" x 41-5/8"
Notes: *Please purchase the following separately:
K-75790-ZZ-0 Shower ArmK-72419-CP ShowerheadK-T99762-4 Valve Trim- Polished Chrome with DiverterK-11748-KS Pressure - Balancing Valve with Stops and DiverterK-98351-CP Wall Mount Supply Elbow with Check Valve
Color/Finish: CP Polished Chrome
Model Number: K-99898-CPModel Name: Awaken G110 Slidebar Kit
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•
Tru by Hilton
PF-09-APage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Hand Shower and Diverter Control
Combo @ Accessible Guest Bath Roll-in Shower (OPTION B)
Item Number: PF-09-B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Grohe
Revision(s):
Contact: Jennifer Humphrey
Phone: (312) 918-8142Fax:
Address:
Address: 200 N. Gary Avenue, Suite GRoselle IL 60172-
Contact:E-mail: jennifer.humphrey@grohe.comE-mail:
800#: (800) 444-7649
Web: www.grohe.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Dimensions: 24" x 4" x 2-3/4"
Notes: Please purchase the following separately:
New Tempesta Cosmopolitan 100 Shower Head (26043000)GrohFlex Universal Rough In Box (35026000)Atrio Dual Function PBV Trim- Includes ADA compliant Diverter (19867000)Shower Arm and Flange (27414000)Rainshower 36" Shower Bar (28819001)RotaFlex Metal Shower Hose (28025000)Euphoria 110 Mono Handshower - 1.5 GPM (2726500E)Shut- Off for Handhled (95866000)Hand Shower Wall Mount (28622000)Hand Shower Wall Union (28672000)
Color/Finish: Chrome
Model Number: See NotesModel Name: ADA Shower Combination
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•
Tru by Hilton
PF-09-BPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Hand Shower and Diverter Control
Combo @ Accessible Guest Bath Roll-in Shower (OPTION C)
Item Number: PF-09-C
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Moen Inc.
Revision(s):
Contact: Jason Reynolds
Phone:Fax: (800) 628-0894
Address:
Address: 25300 Al Moen DriveNorth Olmsted OH 44070 United States of America
Contact:E-mail:E-mail:
800#: (800) 289-6636
Web: www.moenpro.comWeb:
Mobile: (407) 340-3249Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Description: Includes:Handheld shower69" double interlock spiral hose (metal)Double check valves in handshower30" slide bar with push button height selection
Dimensions: 4" x 30-5/8"
Notes: Purchase the following separately:
Drop Ell (A725)Pressure Balancing Valve (62370)Three Function Commercial Transfer Valve Trim Kit with Diverter (3360)Align Three Function Transfer Valve Trim Kit with Diverter (T4192)
Color/Finish: Polished Chrome
Model Number: 3669EPModel Name: 4 Function Massaging Handshower w/ Slide Bar
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•
Tru by Hilton
PF-09-CPage 1
13Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Hand Shower and Diverter Control
Combo @ Accessible Guest Bath Roll-in Shower (OPTION C)
Item Number: PF-09-C
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Moen Inc.Instructions:
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-09-CPage 2
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Hand Shower and Diverter Control
Combo @ Accessible Guest Bath Roll-in Shower (OPTION D)
Item Number: PF-09-D
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Speakman- Stephanie Weston
Revision(s):
Contact: Stephanie P. Weston
Phone: (302) 765-0227Fax:
Address:
Address: 400 Anchor Mill RoadNew Castle DE 19720-
Contact:E-mail: sweston@speakmancompany.comE-mail:Web: www.speakmancompany.comWeb:
Mobile: (382) 367-2407Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Description: Includes:Pressure Balance Valve with Diverter and Trim (SM-1400-P)Hand Shower (VS-3010)Slide Bar (VS-153-ADA)Showerarm and Flange (S-2540)Pause/Trickle Adapter (VS-156)
Dimensions: 5.5"W x 5.75"D x 53"HColor/Finish: Polished Chrome
Model Number: SM-1490-ADA-PModel Name: Neo ADA Shower Combination
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-09-DPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Tub @ Accessible Guest Bath (OPTION
A)
Item Number: PF-10-A
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Sterling
Revision(s):
Contact: Doug Johnston
Phone:Fax:
Address:
Address: A Kohler Company444 Highland DriveKohler WI 53044-
Contact:E-mail: douglas.johnston@kohler.comE-mail:
800#: (800) 783-7546
Web: www.sterlingplumbing.comWeb:
Mobile: (972) 342-8026Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Dimensions: 60"W x 29"D x 16-1/4"H
Notes: Manufacturer must provide all parts necessary for installation.
Refer to architectural drawings for locations.
Color/Finish: White
Model Number: 71041110Model Name: Sterling Performa Series
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-10-APage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Tub @ Accessible Guest Bath (OPTION
B)
Item Number: PF-10-B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: American Standard
Revision(s):
Contact: Mark Terrel
Phone: (937) 603-8501Fax: (937) 845-2366
Address:
Address: P.O. Box 68201 Centennial PlazaPiscataway NJ 08855-6820
Contact:E-mail: terrelm@americanstandard.comE-mail:
800#: (800) 442-1902
Web: www.americanstandard-us.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Dimensions: 60"W x 29"D x 17-1/2"H
Notes: Manufacturer must provide all parts necessary for installation.
Refer to architectural drawings for locations.
Color/Finish: 020 White
Model Number: 2390.202.020Model Name: Princeton Recess Bath
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-10-BPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Hand Shower and Tub Combo @
Accessible Guest Bath (OPTION A)
Item Number: PF-11-A
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Kohler Company
Revision(s):
Contact: Doug Johnston
Phone:Fax:
Address:
Address: 444 Highland DriveKohler WI 53044-
Contact:E-mail: douglas.johnston@kohler.comE-mail:Web: ww.kohler.comWeb:
Mobile: (972) 342-8026Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Description: Includes:Awaken G110 Multifunction Handshower36" Slidebar60" Metal Hose
Dimensions: 3-5/8" x 4-5/16" x 41-5/8"
Notes: Please purchase the following separately:
K-T99762-4 Valve Trim- Polished Chrome with DiverterK-11748-KS Pressure - Balancing Valve with Stops and DiverterK-98351-CP Wall Mount Supply Elbow with Check ValveK-15135-CP Bath Spout - Polished Chrome
Color/Finish: CP Polished Chrome
Model Number: K-99898-CPModel Name: Awaken G110 Slidebar Kit
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Tru by Hilton
PF-11-APage 1
13Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Hand Shower and Tub Combo @
Accessible Guest Bath (OPTION A)
Item Number: PF-11-A
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Kohler CompanyInstructions:
Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-11-APage 2
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Hand Shower and Tub Combo @
Accessible Guest Bath (OPTION B)
Item Number: PF-11-B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Grohe
Revision(s):
Contact: Jennifer Humphrey
Phone: (312) 918-8142Fax:
Address:
Address: 200 N. Gary Avenue, Suite GRoselle IL 60172-
Contact:E-mail: jennifer.humphrey@grohe.comE-mail:
800#: (800) 444-7649
Web: www.grohe.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Dimensions: 24" x 4" x 2-3/4"
Notes: Please purchase the following separately:
New Tempesta Cosmopolitan 100 Shower Head (26043000)GrohFlex Universal Rough In Box (35026000)Atrio Dual Function PBV Trim - Includes ADA compliant diverter(19867000)Shower Arm and Flange (27414000)Rainshower 36" Shower Bar (28819001)RotaFlex Metal Shower Hose (28025000)Euphoria 110 Mono Handshower - 1.5 GPM (2726500E)Shut- Off for Handhled (95866000)Hand Shower Wall Mount (28622000)Hand Shower Wall Union (28672000)Twin Elbow (03671000)Concetto Tub Spout - Includes ADA compliant diverter (13275001)
Color/Finish: Chrome
Model Number: See NotesModel Name: ADA Shower and Tub Combination
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Tru by Hilton
PF-11-BPage 1
13Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Hand Shower and Tub Combo @
Accessible Guest Bath (OPTION B)
Item Number: PF-11-B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: GroheInstructions:
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-11-BPage 2
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Hand Shower and Tub Combo @
Accessible Guest Bath (OPTION C)
Item Number: PF-11-C
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Moen Inc.
Revision(s):
Contact: Jason Reynolds
Phone:Fax: (800) 628-0894
Address:
Address: 25300 Al Moen DriveNorth Olmsted OH 44070 United States of America
Contact:E-mail:E-mail:
800#: (800) 289-6636
Web: www.moenpro.comWeb:
Mobile: (407) 340-3249Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Description: Includes:Handheld shower69" double interlock spiral hose (metal)Double check valves in handshower30" slide bar with push button height selection
Dimensions: 4" x 30-5/8"
Notes: Purchase the following separately:
Drop Ell (A725)Pressure Balancing Valve (62370)Three Function Commercial Transfer Valve Trim Kit with Diverter (3360) Align Three Function Transfer Valve Trim Kit with Diverter (T4192)Level Chrome Tub Spout (3892)
Color/Finish: Polished Chrome
Model Number: 3669EPModel Name: 4 Function Massaging Handshower w/ Slide Bar and
Tub Spout
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•
Tru by Hilton
PF-11-CPage 1
13Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Hand Shower and Tub Combo @
Accessible Guest Bath (OPTION C)
Item Number: PF-11-C
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Moen Inc.Instructions:
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-11-CPage 2
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Hand Shower and Tub Combo @
Accessible Guest Bath (OPTION D)
Item Number: PF-11-D
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Speakman- Stephanie Weston
Revision(s):
Contact: Stephanie P. Weston
Phone: (302) 765-0227Fax:
Address:
Address: 400 Anchor Mill RoadNew Castle DE 19720-
Contact:E-mail: sweston@speakmancompany.comE-mail:Web: www.speakmancompany.comWeb:
Mobile: (382) 367-2407Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Description: Includes:Pressure Balance Valve with Diverter and Trim (SM-1400-P)Hand Shower (VS-3010)Tub Spout (S1557)Slide Bar (VS-153-ADA)Showerarm and Flange (S-2540)Pause/Trickle Adapter (VS-156)
Dimensions: 5.5"W x 5.75"D x 53"HColor/Finish: Polished Chrome
Model Number: SM-1490-ADA-PModel Name: Neo ADA Shower Combination
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-11-DPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Sink Basin @ Public Restroom
(OPTION A)
Item Number: PF-12-A
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Sterling
Revision(s):
Contact: Doug Johnston
Phone:Fax:
Address:
Address: A Kohler Company444 Highland DriveKohler WI 53044-
Contact:E-mail: douglas.johnston@kohler.comE-mail:
800#: (800) 783-7546
Web: www.sterlingplumbing.comWeb:
Mobile: (972) 342-8026Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Dimensions: 18"W x 12"D x 7-1/8"H
Notes: Plumbing contractor MUST coordinate with casegood FF&E vendor to ensure faucet fixture and sink basin fit within vanity base.
Color/Finish: White
Model Number: 442007-U-0Model Name: Sterling Stinson Undermount Sink Basin
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-12-APage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Sink Basin @ Public Restroom
(OPTION B)
Item Number: PF-12-B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: American Standard
Revision(s):
Contact: Mark Terrel
Phone: (937) 603-8501Fax: (937) 845-2366
Address:
Address: P.O. Box 68201 Centennial PlazaPiscataway NJ 08855-6820
Contact:E-mail: terrelm@americanstandard.comE-mail:
800#: (800) 442-1902
Web: www.americanstandard-us.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Dimensions: OVERALL DIMENSIONS: 17-1/8"W x 14-1/8"D x 7-1/2"H
Notes: Plumbing contractor MUST coordinate with casegood FF&E vendor to ensure faucet fixture and sink basin fit within vanity base.
Color/Finish: White
Model Number: 0495.221.020Model Name: Ovalyn Undercounter Sink
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-12-BPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Sink Faucet @ Public Restroom
(OPTION A)
Item Number: PF-13-A
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Kohler Company
Revision(s):
Contact: Doug Johnston
Phone:Fax:
Address:
Address: 444 Highland DriveKohler WI 53044-
Contact:E-mail: douglas.johnston@kohler.comE-mail:Web: ww.kohler.comWeb:
Mobile: (972) 342-8026Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Description: 1.5 GPM Flow RateSingle Hole Installation
Dimensions: 4-3/8"Spout Reach x 4-1/2"H
Notes: Plumbing contractor MUST coordinate with casegood FF&E vendor to ensure faucet fixture and sink basin fit within vanity base.
Color/Finish: Polished Chrome
Model Number: K16027-4Model Name: July Single-Handle Sink Faucet
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-13-APage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Sink Faucet @ Public Restroom
(OPTION B)
Item Number: PF-13-B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Grohe
Revision(s):
Contact: Jennifer Humphrey
Phone: (312) 918-8142Fax:
Address:
Address: 200 N. Gary Avenue, Suite GRoselle IL 60172-
Contact:E-mail: jennifer.humphrey@grohe.comE-mail:
800#: (800) 444-7649
Web: www.grohe.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Description: 1.5 GPM Flow RateSingle Hole Installation
Dimensions: 7-5/16" x 3-15/16"
Notes: Plumbing contractor MUST coordinate with casegood FF&E vendor to ensure faucet fixture and sink basin fit within vanity base.
Color/Finish: 001 Chrome
Model Number: 34271001Model Name: Concetto Lavatory Faucet
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-13-BPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Sink Faucet @ Public Restroom
(OPTION C)
Item Number: PF-13-C
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Moen Inc.
Revision(s):
Contact: Jason Reynolds
Phone:Fax: (800) 628-0894
Address:
Address: 25300 Al Moen DriveNorth Olmsted OH 44070 United States of America
Contact:E-mail:E-mail:
800#: (800) 289-6636
Web: www.moenpro.comWeb:
Mobile: (407) 340-3249Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Description: 1.2 GPM Flow RateSingle Hole Installation
Dimensions: 5-11/16" x 2" x 6-1/8"
Notes: Plumbing contractor MUST coordinate with casegood FF&E vendor to ensure faucet fixture and sink basin fit within vanity base.
Color/Finish: Chrome
Model Number: 9480Model Name: Ambition Low Profile Faucet
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-13-CPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Sink Faucet @ Public Restroom
(OPTION D)
Item Number: PF-13-D
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Speakman- Stephanie Weston
Revision(s):
Contact: Stephanie P. Weston
Phone: (302) 765-0227Fax:
Address:
Address: 400 Anchor Mill RoadNew Castle DE 19720-
Contact:E-mail: sweston@speakmancompany.comE-mail:Web: www.speakmancompany.comWeb:
Mobile: (382) 367-2407Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Description: 1.2 GPM Flow Rate3- Hole Installation
Dimensions: 6.63"D x 7"H x 2.25"W
Notes: Plumbing contractor MUST coordinate with casegood FF&E vendor to ensure faucet fixture and sink basin fit within vanity base.
Color/Finish: Polished Chrome
Model Number: SB-1021-EModel Name: Neo Widespread Faucet
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-13-DPage 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Toilet @ Public Restrooms (OPTION A)Item Number: PF-14-A
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Gerber Plumbing Fixtures
Revision(s):
Contact:
Phone: (630) 679-1420Fax:
Address:
Address: 2500 Internationale PkwyWoodridge IL 60517-
Contact:E-mail:E-mail:Web: gerberonline.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Description: 1.28 gpf/ 4.8 lpf high efficiency floor mount bowlSiphon JetVitreous china
Dimensions: 27-3/8"L x 14-3/4"W x 17"H
Notes: Please purchase the following separately:
Sloan - #3780018 - 1.28 gpf FlushometerBemis - #1055 000 - Commercial Heavy Duty Elongated toilet SeatPremier - #191200 - Wax Bowl Ring with Sleeve
Color/Finish: White
Model Number: 25-733-0Model Name: North Point ErgoHeight ADA Elongated Spud Bowl
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-14-APage 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Toilet @ Public Restrooms (OPTION B)Item Number: PF-14-B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Kohler Company
Revision(s):
Contact: Doug Johnston
Phone:Fax:
Address:
Address: 444 Highland DriveKohler WI 53044-
Contact:E-mail: douglas.johnston@kohler.comE-mail:Web: ww.kohler.comWeb:
Mobile: (972) 342-8026Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Description: 1.8 gpf Vitreous China
Dimensions: 28-1/4"L x 14-7/8"W x 14-1/8"H
Notes: Please purchase the following separately:
Sloan - #3780018 - 1.28 gpf FlushometerKohler - #K-4670-CA-0 - Lustra Commercial Toilet Seat Premier - #191200 Wax Bowl Ring with Sleeve
Color/Finish: White
Model Number: K-4405-0Model Name: Highline Enlongated ADA Toilet Bowl
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-14-BPage 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Toilet @ Public Restrooms (OPTION C)Item Number: PF-14-C
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: American Standard
Revision(s):
Contact: Mark Terrel
Phone: (937) 603-8501Fax: (937) 845-2366
Address:
Address: P.O. Box 68201 Centennial PlazaPiscataway NJ 08855-6820
Contact:E-mail: terrelm@americanstandard.comE-mail:
800#: (800) 442-1902
Web: www.americanstandard-us.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Description: Operates in the range of 1.1 gpf to 1.6 gpfDirect-fed siphon jet actionVitreous china
Dimensions: 28-1/4"L x 14"W x 16-1/2"H
Notes: Please purchase the following separately:
Sloan - #3780018 - 1.28 gpf FlushometerPremier - #283035 - Heavy Duty Commercial Enlongated Toilet SeatPremier - #191200 Wax Bowl Ring with Sleeve
Color/Finish: White
Model Number: 3043.001.020Model Name: Madera FloWise ADA Elongated Toilet Bowl
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities must be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the complete installation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
PF-14-CPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Plastic Laminate @ Command Center,
Lobby Millwork, and Employee Breakroom
Item Number: PL-01
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Lamin-art
Revision(s):
Contact: Kristen Davis, Architectural Representative
Phone: Customer Service: (800)
Fax: (800) 860-9199
Address:
Address: 1670 Basswood RoadSchaumburg IL 60173 United States of America
Contact:E-mail: kdavis@laminart.comE-mail:Web: http://www.laminart.com/Web:
Phone:
Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: 3077 Mountain BirchColor/Finish: Velva-Tex FinishSize/Dimensions: Refer to architectural drawings for details and
locations.
Instructions:Must be of contract quality and suitable for commercial use.•Quantities to be verified by installer.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
PL-01Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Plastic Laminate @ Market and
Public Space Millwork
Item Number: PL-02
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Formica
Revision(s):
Contact: Jennifer Sullivan
Phone: (614) 264-7768Fax:
Address:
Address: 4612 Pillars DriveCincinnati OH 45209 United States of America
Contact:E-mail: jennifer.sullivan@formica.comE-mail:Web: www.formica.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: 8824-58Color/Finish: White Drops / Matte FinishSize/Dimensions: Refer to architectural drawings for details and
locations.
Instructions:Must be of contract quality and suitable for commercial use.•Quantities to be verified by installer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
PL-02Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Plastic Laminate @ Public Space
Millwork & Employee Breakroom Millwork
Item Number: PL-04
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Formica
Revision(s):
Contact: Jennifer Sullivan
Phone: (614) 264-7768Fax:
Address:
Address: 4612 Pillars DriveCincinnati OH 45209 United States of America
Contact:E-mail: jennifer.sullivan@formica.comE-mail:Web: www.formica.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Color Core -New White/ 7223C-58Color/Finish: MatteSize/Dimensions: Refer to architectural drawings for details and
locations.
Instructions:Must be of contract quality and suitable for commercial use.•Quantities to be verified by installer.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
PL-04Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Plastic Laminate C @ Employee
Breakroom, Fitness & Pool Millwork
Item Number: PL-07
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Formica
Revision(s):
Contact: Jennifer Sullivan
Phone: (614) 264-7768Fax:
Address:
Address: 4612 Pillars DriveCincinnati OH 45209 United States of America
Contact:E-mail: jennifer.sullivan@formica.comE-mail:Web: www.formica.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: 2662-58Color/Finish: Clementine/ Matte FinishSize/Dimensions: Refer to architectural drawings for details and
locations.
Instructions:Must be of contract quality and suitable for commercial use.•Quantities to be verified by installer.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
PL-07Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Plastic Laminate D @ Employee
Breakroom, Fitness & Pool Millwork
Item Number: PL-08
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Formica
Revision(s):
Contact: Jennifer Sullivan
Phone: (614) 264-7768Fax:
Address:
Address: 4612 Pillars DriveCincinnati OH 45209 United States of America
Contact:E-mail: jennifer.sullivan@formica.comE-mail:Web: www.formica.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: 2013-58Color/Finish: Fiesta/ Matte FinishSize/Dimensions: Refer to architectural drawings for details and
locations.
Instructions:Must be of contract quality and suitable for commercial use.•Quantities to be verified by installer.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
PL-08Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Plastic Laminate E @ Employee
Breakroom, Fitness & Pool Millwork
Item Number: PL-09
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Formica
Revision(s):
Contact: Jennifer Sullivan
Phone: (614) 264-7768Fax:
Address:
Address: 4612 Pillars DriveCincinnati OH 45209 United States of America
Contact:E-mail: jennifer.sullivan@formica.comE-mail:Web: www.formica.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: 7882-58Color/Finish: Pale Gold/ Matte FinishSize/Dimensions: Refer to architectural drawings for details and
locations.
Instructions:Must be of contract quality and suitable for commercial use.•Quantities to be verified by installer.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
PL-09Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Plastic Laminate @ Guestroom
Window Sill
Item Number: PL-10
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Formica
Revision(s):
Contact: Jennifer Sullivan
Phone: (614) 264-7768Fax:
Address:
Address: 4612 Pillars DriveCincinnati OH 45209 United States of America
Contact:E-mail: jennifer.sullivan@formica.comE-mail:Web: www.formica.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: 902-58Color/Finish: Platinum/ Matte FinishSize/Dimensions: Refer to architectural drawings for details and
dimensions.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities to be verified by installer.•All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
PL-10Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Plastic Laminate @ Hydration Station,
Fitness Barre & Guest Laundry Folding Table
Item Number: PL-11
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Wilsonart International
Revision(s):
Contact: Donna Ariapad, Commercial Specification Respresentative
Phone: (513) 874-5900Fax: (513) 874-5974
Address:
Address: 2500 International StreetColumbus OH 43228 United States of America
Contact:
E-mail: donnaariapad@flagginc.comE-mail:
800#: (800) 736-3524
Web: http://www.wilsonart.comWeb:
Mobile: (513) 295-3080Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Landmark Wood/ 7981K-12Color/Finish: Soft grainSize/Dimensions: Refer to architectural drawings for details and
locations.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities to be verified by installer.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
PL-11Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Plastic Laminate @ Hydration
Station Millwork
Item Number: PL-12
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Tamarack
Revision(s):
Contact: Jerry Roeck
Phone: (513) 554-3770Fax: (513) 554-3775
Address:
Address: 39 Techview DrCincinnati OH 45215 United States of America
Contact:E-mail: jroeck.tamarack@fuse.netE-mail:
800#: (800) 582-4555
Web: www.tamarackdistributorsinc.comWeb:
Mobile: (513) 407-1185Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Primary Yellow/ SY914Color/Finish: SuedeSize/Dimensions: Refer to architectural drawings for details and
locations.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Quantities to be verified by installer.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
PL-12Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Ceiling Paint @ GuestroomItem Number: PT-01
Item Quantity:
Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting
Revision(s):
Contact: Craig Bunting
Phone: (201) 949-6187Fax:
Address:
Address:
Contact: Craig BuntingE-mail: craig.bunting@benjaminmoore.comE-mail: craig.bunting@benjaminmoore.com
800# : (973) 896-6904
Web: www.benjaminmoore.comWeb: www.benjaminmoore.com
Mobile: (973) 896-6904Phone: (201) 949-6187Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Ultra Spec / N536Color/Finish: Super White PM-1/ Flat
Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
PT-01Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Ceiling Paint @ Guest BathItem Number: PT-02
Item Quantity:
Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting
Revision(s):
Contact: Craig Bunting
Phone: (201) 949-6187Fax:
Address:
Address:
Contact: Craig BuntingE-mail: craig.bunting@benjaminmoore.comE-mail: craig.bunting@benjaminmoore.com
800# : (973) 896-6904
Web: www.benjaminmoore.comWeb: www.benjaminmoore.com
Mobile: (973) 896-6904Phone: (201) 949-6187Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Ultra Spec / N539Color/Finish: Super White PM-1 / Semi-Gloss
Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
PT-02Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Paint @ Guestroom Doors, Door
Frames, Grilles, Corridor Doors and Door Frames
Item Number: PT-03
Item Quantity:
Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting
Revision(s):
Contact: Craig Bunting
Phone: (201) 949-6187Fax:
Address:
Address:
Contact: Craig BuntingE-mail: craig.bunting@benjaminmoore.comE-mail: craig.bunting@benjaminmoore.com
800# : (973) 896-6904
Web: www.benjaminmoore.comWeb: www.benjaminmoore.com
Mobile: (973) 896-6904Phone: (201) 949-6187Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Ultra Spec / N539Color/Finish: Snow White 2122-70 / Semi-gloss
Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
PT-03Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Overall Paint @ Fitness Center,
Employee Breakroom, and Back of House
Item Number: PT-04
Item Quantity:
Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting
Revision(s):
Contact: Craig Bunting
Phone: (201) 949-6187Fax:
Address:
Address:
Contact: Craig BuntingE-mail: craig.bunting@benjaminmoore.comE-mail: craig.bunting@benjaminmoore.com
800# : (973) 896-6904
Web: www.benjaminmoore.comWeb: www.benjaminmoore.com
Mobile: (973) 896-6904Phone: (201) 949-6187Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Ultra Spec / N538Color/Finish: White River 1499 / Eggshell
Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
PT-04Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Paint @ Window Soffit and CeilingItem Number: PT-05
Item Quantity:
Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting
Revision(s):
Contact: Craig Bunting
Phone: (201) 949-6187Fax:
Address:
Address:
Contact: Craig BuntingE-mail: craig.bunting@benjaminmoore.comE-mail: craig.bunting@benjaminmoore.com
800# : (973) 896-6904
Web: www.benjaminmoore.comWeb: www.benjaminmoore.com
Mobile: (973) 896-6904Phone: (201) 949-6187Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Aura / 522Color/Finish: Deep Silver 2124-30 / Flat
Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
PT-05Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Ceiling Paint @ Lobby and Fitness
Center
Item Number: PT-06
Item Quantity:
Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting
Revision(s):
Contact: Craig Bunting
Phone: (201) 949-6187Fax:
Address:
Address:
Contact: Craig BuntingE-mail: craig.bunting@benjaminmoore.comE-mail: craig.bunting@benjaminmoore.com
800# : (973) 896-6904
Web: www.benjaminmoore.comWeb: www.benjaminmoore.com
Mobile: (973) 896-6904Phone: (201) 949-6187Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Aura / 522Color/Finish: Nightfall 1566 / Flat
Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
PT-06Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Ceiling Paint @ Lobby CorridorItem Number: PT-07
Item Quantity:
Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting
Revision(s):
Contact: Craig Bunting
Phone: (201) 949-6187Fax:
Address:
Address:
Contact: Craig BuntingE-mail: craig.bunting@benjaminmoore.comE-mail: craig.bunting@benjaminmoore.com
800# : (973) 896-6904
Web: www.benjaminmoore.comWeb: www.benjaminmoore.com
Mobile: (973) 896-6904Phone: (201) 949-6187Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Ultra Spec / N536Color/Finish: Bright Yellow 2022-30 / Flat
Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
PT-07Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Paint @ Command Center SoffitItem Number: PT-08
Item Quantity:
Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting
Revision(s):
Contact: Craig Bunting
Phone: (201) 949-6187Fax:
Address:
Address:
Contact: Craig BuntingE-mail: craig.bunting@benjaminmoore.comE-mail: craig.bunting@benjaminmoore.com
800# : (973) 896-6904
Web: www.benjaminmoore.comWeb: www.benjaminmoore.com
Mobile: (973) 896-6904Phone: (201) 949-6187Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Ultra Spec / N539Color/Finish: Super White PM-1 / Semi-Gloss
Notes: Painted surface MUST cure for a full 7 days prior to applying any graphic vinyl.
Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
PT-08Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Ceiling Paint @ Command
Center Soffit
Item Number: PT-09
Item Quantity:
Manufacturer: Sherwin Williams Co. Source: Sherwin Williams Co.
Revision(s):
Contact: Stacy Stachler, Account Executive
Phone: (216) 341-6444Fax: (216) 341-1032
Address: 10740-C Broadway AvenueGarfield Heights OH 44125-
Address: 10740-C Broadway AvenueGarfield Heights OH 44125
Contact: Stacy Stachler, Account ExecutiveE-mail: stacy.stachler@sherwin.comE-mail: stacy.stachler@sherwin.comWeb: http://www.sherwin.comWeb: www.sherwinwilliams.com
Phone: (216) 341-6444Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Impromptu/ SW6955Color/Finish: Flat
Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
PT-09Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Paint @ Command Center ColumnsItem Number: PT-10
Item Quantity:
Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting
Revision(s):
Contact: Craig Bunting
Phone: (201) 949-6187Fax:
Address:
Address:
Contact: Craig BuntingE-mail: craig.bunting@benjaminmoore.comE-mail: craig.bunting@benjaminmoore.com
800# : (973) 896-6904
Web: www.benjaminmoore.comWeb: www.benjaminmoore.com
Mobile: (973) 896-6904Phone: (201) 949-6187Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Aura / 526Color/Finish: Deep Silver 2124-30 / Satin
Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
PT-10Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Paint A @ Work Zone,
Employee Breakroom, and Fitness Center
Item Number: PT-11
Item Quantity:
Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting
Revision(s):
Contact: Craig Bunting
Phone: (201) 949-6187Fax:
Address:
Address:
Contact: Craig BuntingE-mail: craig.bunting@benjaminmoore.comE-mail: craig.bunting@benjaminmoore.com
800# : (973) 896-6904
Web: www.benjaminmoore.comWeb: www.benjaminmoore.com
Mobile: (973) 896-6904Phone: (201) 949-6187Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Ultra Spec / N538Color/Finish: Ocean Spray 2047-60 / Eggshell
Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
PT-11Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Paint @ Lobby Column, Soffits, and
Vestibule
Item Number: PT-12
Item Quantity:
Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting
Revision(s):
Contact: Craig Bunting
Phone: (201) 949-6187Fax:
Address:
Address:
Contact: Craig BuntingE-mail: craig.bunting@benjaminmoore.comE-mail: craig.bunting@benjaminmoore.com
800# : (973) 896-6904
Web: www.benjaminmoore.comWeb: www.benjaminmoore.com
Mobile: (973) 896-6904Phone: (201) 949-6187Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Aura / 526Color/Finish: Nightfall 1596 / Satin
Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
PT-12Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Paint @ Public Space and B.O.H.
Doors, Door Frames, and Grilles
Item Number: PT-13
Item Quantity:
Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting
Revision(s):
Contact: Craig Bunting
Phone: (201) 949-6187Fax:
Address:
Address:
Contact: Craig BuntingE-mail: craig.bunting@benjaminmoore.comE-mail: craig.bunting@benjaminmoore.com
800# : (973) 896-6904
Web: www.benjaminmoore.comWeb: www.benjaminmoore.com
Mobile: (973) 896-6904Phone: (201) 949-6187Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Ultra Spec / N539Color/Finish: Snow White 2122-70 / Semi-gloss
Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
PT-13Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Paint B @ Employee BreakroomItem Number: PT-14
Item Quantity:
Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting
Revision(s):
Contact: Craig Bunting
Phone: (201) 949-6187Fax:
Address:
Address:
Contact: Craig BuntingE-mail: craig.bunting@benjaminmoore.comE-mail: craig.bunting@benjaminmoore.com
800# : (973) 896-6904
Web: www.benjaminmoore.comWeb: www.benjaminmoore.com
Mobile: (973) 896-6904Phone: (201) 949-6187Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Aura / 524Color/Finish: Hot Spice 2011-30 / Eggshell
Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
PT-14Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Paint @ Lobby Soffit GrillesItem Number: PT-15
Item Quantity:
Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting
Revision(s):
Contact: Craig Bunting
Phone: (201) 949-6187Fax:
Address:
Address:
Contact: Craig BuntingE-mail: craig.bunting@benjaminmoore.comE-mail: craig.bunting@benjaminmoore.com
800# : (973) 896-6904
Web: www.benjaminmoore.comWeb: www.benjaminmoore.com
Mobile: (973) 896-6904Phone: (201) 949-6187Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Aura / 524Color/Finish: Nightfall 1596 / Semi-Gloss
Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
PT-15Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Paint @ Window Ceiling GrillesItem Number: PT-16
Item Quantity:
Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting
Revision(s):
Contact: Craig Bunting
Phone: (201) 949-6187Fax:
Address:
Address:
Contact: Craig BuntingE-mail: craig.bunting@benjaminmoore.comE-mail: craig.bunting@benjaminmoore.com
800# : (973) 896-6904
Web: www.benjaminmoore.comWeb: www.benjaminmoore.com
Mobile: (973) 896-6904Phone: (201) 949-6187Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Aura / 524Color/Finish: Deep Silver 2124-30 / Semi-Gloss
Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
PT-16Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Ceiling Paint @ Indoor PoolItem Number: PT-17
Item Quantity:
Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting
Revision(s):
Contact: Craig Bunting
Phone: (201) 949-6187Fax:
Address:
Address:
Contact: Craig BuntingE-mail: craig.bunting@benjaminmoore.comE-mail: craig.bunting@benjaminmoore.com
800# : (973) 896-6904
Web: www.benjaminmoore.comWeb: www.benjaminmoore.com
Mobile: (973) 896-6904Phone: (201) 949-6187Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Aura Bath & Spa Waterbourne / 528Color/Finish: Super White PM-1 / Semi-Gloss
Notes: Contractor MUST review manufacturer's instructions and application prior to installing.
Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
PT-17Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Ceiling Paint @ Indoor PoolItem Number: PT-18
Item Quantity:
Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting
Revision(s):
Contact: Craig Bunting
Phone: (201) 949-6187Fax:
Address:
Address:
Contact: Craig BuntingE-mail: craig.bunting@benjaminmoore.comE-mail: craig.bunting@benjaminmoore.com
800# : (973) 896-6904
Web: www.benjaminmoore.comWeb: www.benjaminmoore.com
Mobile: (973) 896-6904Phone: (201) 949-6187Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Aura Bath & Spa Waterbourne / 528Color/Finish: Ocean Spray 2047-60 / Semi-Gloss
Notes: Contractor MUST review manufacturer's instructions and application prior to installing.
Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
PT-18Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Paint @ Indoor PoolItem Number: PT-19
Item Quantity:
Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting
Revision(s):
Contact: Craig Bunting
Phone: (201) 949-6187Fax:
Address:
Address:
Contact: Craig BuntingE-mail: craig.bunting@benjaminmoore.comE-mail: craig.bunting@benjaminmoore.com
800# : (973) 896-6904
Web: www.benjaminmoore.comWeb: www.benjaminmoore.com
Mobile: (973) 896-6904Phone: (201) 949-6187Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Precatalyzed Epoxy / V342Color/Finish: Harbor Gray AC-25 / Eggshell
Notes: Contractor MUST review manufacturer's instructions and application prior to installing.
Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
PT-19Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Paint @ Indoor PoolItem Number: PT-20
Item Quantity:
Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting
Revision(s):
Contact: Craig Bunting
Phone: (201) 949-6187Fax:
Address:
Address:
Contact: Craig BuntingE-mail: craig.bunting@benjaminmoore.comE-mail: craig.bunting@benjaminmoore.com
800# : (973) 896-6904
Web: www.benjaminmoore.comWeb: www.benjaminmoore.com
Mobile: (973) 896-6904Phone: (201) 949-6187Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Precatalyzed Epoxy / V342Color/Finish: Nightfall 1596 / Eggshell
Notes: Contractor MUST review manufacturer's instructions and application prior to installing.
Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
PT-20Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Paint @ Corridor Doors and
Door Frames
Item Number: PT-21
Item Quantity:
Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting
Revision(s):
Contact: Craig Bunting
Phone: (201) 949-6187Fax:
Address:
Address:
Contact: Craig BuntingE-mail: craig.bunting@benjaminmoore.comE-mail: craig.bunting@benjaminmoore.com
800# : (973) 896-6904
Web: www.benjaminmoore.comWeb: www.benjaminmoore.com
Mobile: (973) 896-6904Phone: (201) 949-6187Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Ultra Spec / N539Color/Finish: Ocean Spray 2047-60 / Semi-Gloss
Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
PT-21Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Ceiling Paint @ Elevator LobbyItem Number: PT-24
Item Quantity:
Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting
Revision(s):
Contact: Craig Bunting
Phone: (201) 949-6187Fax:
Address:
Address:
Contact: Craig BuntingE-mail: craig.bunting@benjaminmoore.comE-mail: craig.bunting@benjaminmoore.com
800# : (973) 896-6904
Web: www.benjaminmoore.comWeb: www.benjaminmoore.com
Mobile: (973) 896-6904Phone: (201) 949-6187Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Aura / 522Color/Finish: Graytint 1611 / Flat
Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
PT-24Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Ceiling Paint @ Breakfast, Fitness
Millwork Alcove, Typical Guestroom Corridors, and Back of House
Item Number: PT-25
Item Quantity:
Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting
Revision(s):
Contact: Craig Bunting
Phone: (201) 949-6187Fax:
Address:
Address:
Contact: Craig BuntingE-mail: craig.bunting@benjaminmoore.comE-mail: craig.bunting@benjaminmoore.com
800# : (973) 896-6904
Web: www.benjaminmoore.comWeb: www.benjaminmoore.com
Mobile: (973) 896-6904Phone: (201) 949-6187Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Ultra Spec / N536Color/Finish: Super White PM-1 / Flat
Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
PT-25Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Ceiling Paint @ Public RestroomsItem Number: PT-26
Item Quantity:
Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting
Revision(s):
Contact: Craig Bunting
Phone: (201) 949-6187Fax:
Address:
Address:
Contact: Craig BuntingE-mail: craig.bunting@benjaminmoore.comE-mail: craig.bunting@benjaminmoore.com
800# : (973) 896-6904
Web: www.benjaminmoore.comWeb: www.benjaminmoore.com
Mobile: (973) 896-6904Phone: (201) 949-6187Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Ultra Spec / N539Color/Finish: Super White PM-1 / Semi-Gloss
Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
PT-26Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Stripe Paint @ Indoor PoolItem Number: PT-27
Item Quantity:
Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting
Revision(s):
Contact: Craig Bunting
Phone: (201) 949-6187Fax:
Address:
Address:
Contact: Craig BuntingE-mail: craig.bunting@benjaminmoore.comE-mail: craig.bunting@benjaminmoore.com
800# : (973) 896-6904
Web: www.benjaminmoore.comWeb: www.benjaminmoore.com
Mobile: (973) 896-6904Phone: (201) 949-6187Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Precatalyzed Epoxy / V342Color/Finish: Ocean Spray 2047-60 / Eggshell
Notes: Contractor MUST review manufacturer's instructions and application prior to installing.
Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
PT-27Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Paint @ Indoor Pool Focal WallItem Number: PT-28
Item Quantity:
Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting
Revision(s):
Contact: Craig Bunting
Phone: (201) 949-6187Fax:
Address:
Address:
Contact: Craig BuntingE-mail: craig.bunting@benjaminmoore.comE-mail: craig.bunting@benjaminmoore.com
800# : (973) 896-6904
Web: www.benjaminmoore.comWeb: www.benjaminmoore.com
Mobile: (973) 896-6904Phone: (201) 949-6187Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: MM
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: *Precatalyzed Epoxy / V342Color/Finish: *Bright Yellow 2022-30 / Eggshell
Notes: *Contractor MUST review manufacturer's instructions and application prior to installing.
Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
PT-28Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Ceiling Paint @ Landing Zone (Light
Flooring Package)
Item Number: PT-29-A
Item Quantity:
Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting
Revision(s):
Contact: Craig Bunting
Phone: (201) 949-6187Fax:
Address:
Address:
Contact: Craig BuntingE-mail: craig.bunting@benjaminmoore.comE-mail: craig.bunting@benjaminmoore.com
800# : (973) 896-6904
Web: www.benjaminmoore.comWeb: www.benjaminmoore.com
Mobile: (973) 896-6904Phone: (201) 949-6187Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: MM
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: *Aura / 522Color/Finish: *Iron Mountain 2134-30 / Flat
Notes: *For LIGHT FLOORING package - to be used in coordination with GR-213 and GR-214 FF&E.
Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
PT-29-APage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Ceiling Paint @ Landing Zone (Dark
Flooring Package)
Item Number: PT-29-B
Item Quantity:
Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting
Revision(s):
Contact: Craig Bunting
Phone: (201) 949-6187Fax:
Address:
Address:
Contact: Craig BuntingE-mail: craig.bunting@benjaminmoore.comE-mail: craig.bunting@benjaminmoore.com
800# : (973) 896-6904
Web: www.benjaminmoore.comWeb: www.benjaminmoore.com
Mobile: (973) 896-6904Phone: (201) 949-6187Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: MM
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: *Ultra Spec / N536Color/Finish: *Indian River 985 / Flat
Notes: *For DARK flooring package - to be used in coordination with GR-213 and GR-214 FF&E.
Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
PT-29-BPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Paint @ Media Wall Millwork and
Employee Breakroom Millwork
Item Number: PT-30
Item Quantity:
Manufacturer: Benjamin Moore - Craig Bunting Source: Benjamin Moore - Craig Bunting
Revision(s):
Contact: Craig Bunting
Phone: (201) 949-6187Fax:
Address:
Address:
Contact: Craig BuntingE-mail: craig.bunting@benjaminmoore.comE-mail: craig.bunting@benjaminmoore.com
800# : (973) 896-6904
Web: www.benjaminmoore.comWeb: www.benjaminmoore.com
Mobile: (973) 896-6904Phone: (201) 949-6187Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: RL
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: *Chantilly Lace/ OC-65Color/Finish: *Semi-gloss
Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
PT-30Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Rubber Flooring @ Fitness CenterItem Number: R-01
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: ECOsurfaces
Revision(s):
Contact: Brent Beaudoin
Phone: (877) 326-7873Fax: (717) 394-1937
Address:
Address: c/o Gerbert Limited119 South Tree DriveLancaster PA 17603-
Contact:E-mail: brent@sourceonecontract.comE-mail:Web: www.ecosurfaces.comWeb:
Mobile: (513) 309-5964Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: ECOfitColor/Finish: 1216 Final CutSize/Dimensions: Roll Size: 4' x 25'
Thickness: 8.2mm
Instructions:Quantities to be verified by installer.•Material must be contract quality and suitable for commercial use.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Tru by Hilton
R-01Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Wrapped Panel Fabric @ Fitness
Center
Item Number: SF-01
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Carnegie - Hilton
Revision(s):
Contact: Mary Blanchard
Phone: (602) 515-2736Fax: (516) 307-3843
Address:
Address: 1611 W. Flower Cr. S.Phoenix AZ 85015-
Contact:E-mail: mblanchard@carnegie fabricsE-mail:Web: www.carnegiefabrics.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AB
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: *Acrylic Backed Xorel / Meteor 6427Color/Finish: *728Size/Dimensions: *56"W
Notes: *Flame Retardancy: Meets ASTM E84 Class A / Class 1
Material to be wrapped around plywood substrate and secured in place with glue or staples on the back side.
Instructions:Must be of contract quality and suitable for commercial use.•Manufacturer must provide certificate of flame spread rating, smoke develop rating, and fuel contribution as tested in accordance to ASTM-E84 test.
•
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Tru by Hilton
SF-01Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Knockdown Finish @ GuestroomItem Number: SPA-01
Item Quantity:
Manufacturer: PermaTone, Inc. Source: PermaTone, Inc.
Revision(s):
Contact: Victor Gomez
Phone: (832) 243-0787Fax:
Address: 11620 Brittmoore Park DriveHouston TX 77041-
Address: 11620 Brittmoore Park DriveHouston TX 77041-
Contact: Victor GomezE-mail: victor@permatone.comE-mail:Web: www.permatone.comWeb: www.permatone.com
Mobile: (713) 545-8828Phone: (832) 243-0787Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: *See NotesColor/Finish: Color to match Benjamin Moore Harbor Gray AC-25
Notes: *Product to match PermaTone Chiffton and the texture to match Light Damascus
Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material. prior to purchasing or implementation of any material.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
SPA-01Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Knockdown Finish @
Guestroom Headboard Wall (PACKAGE A: Glimmer)
Item Number: SPA-02-A
Item Quantity:
Manufacturer: PermaTone, Inc. Source: PermaTone, Inc.
Revision(s):
Contact: Victor Gomez
Phone: (832) 243-0787Fax:
Address: 11620 Brittmoore Park DriveHouston TX 77041-
Address: 11620 Brittmoore Park DriveHouston TX 77041-
Contact: Victor GomezE-mail: victor@permatone.comE-mail:Web: www.permatone.comWeb: www.permatone.com
Mobile: (713) 545-8828Phone: (832) 243-0787Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: *See NotesColor/Finish: Color to match Benjamin Moore 2121-20 Steel Wool
Notes: *Product to match PermaTone Chiffton and the texture to match Light Damascus
Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material. prior to purchasing or implementation of any material.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
SPA-02-APage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Knockdown Finish @
Guestroom Headboard Wall (PACKAGE B: Spark)
Item Number: SPA-02-B
Item Quantity:
Manufacturer: PermaTone, Inc. Source: PermaTone, Inc.
Revision(s):
Contact: Victor Gomez
Phone: (832) 243-0787Fax:
Address: 11620 Brittmoore Park DriveHouston TX 77041-
Address: 11620 Brittmoore Park DriveHouston TX 77041-
Contact: Victor GomezE-mail: victor@permatone.comE-mail:Web: www.permatone.comWeb: www.permatone.com
Mobile: (713) 545-8828Phone: (832) 243-0787Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: *See NotesColor/Finish: Color to match Benjamin Moore 744 Indigo
Notes: *Product to match PermaTone Chiffton and the texture to match Light Damascus
Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material. prior to purchasing or implementation of any material.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
SPA-02-BPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Knockdown Finish @
Guestroom Headboard Wall (PACKAGE C: Burst)
Item Number: SPA-02-C
Item Quantity:
Manufacturer: PermaTone, Inc. Source: PermaTone, Inc.
Revision(s):
Contact: Victor Gomez
Phone: (832) 243-0787Fax:
Address: 11620 Brittmoore Park DriveHouston TX 77041-
Address: 11620 Brittmoore Park DriveHouston TX 77041-
Contact: Victor GomezE-mail: victor@permatone.comE-mail:Web: www.permatone.comWeb: www.permatone.com
Mobile: (713) 545-8828Phone: (832) 243-0787Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: *See NotesColor/Finish: Color to match Benjamin Moore 2019-40 American
Cheese
Notes: *Product to match PermaTone Chiffton and the texture to match Light Damascus
Instructions:1 coat primer, 2 coats paint.•All paints to be low VOC.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material. prior to purchasing or implementation of any material.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
Refer to Architectural drawings for details and location.•
Tru by Hilton
SPA-02-CPage 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Static Dissipative Tile @ PBXItem Number: SPT-01
Item Quantity:
Manufacturer: Armstrong Flooring Source: Armstrong Flooring
Revision(s):
Contact: Scott J. Wert, Territory Sales Manager
Phone: (800) 356-9301Fax:
Address: 2500 Columbia Ave.P.O. Box 3001Lancaster PA 17604-3001 United States of America
Address: 2500 Columbia Ave.P.O. Box 3001Lancaster PA 17604-3001 United States of America
Contact: Scott J. Wert, Territory Sales ManagerE-mail: sjwert@armstrongflooring.comE-mail: sjwert@armstrongflooring.com
800# : (513) 571-0817 800#: (513) 571-0817
Web: http://www.armstrong.comWeb: http://www.armstrong.com
Phone: (800) 356-9301Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Static Dissipative ExcelonColor/Finish: 51956/ Fossil GraySize/Dimensions: 12" x 12" x1/8"
Notes: S-392 Static Dissipative Tile Adhesive Required.
Static Load Limit : < .005 in.Resistance ANSI/ESD S7.1 ASTM F-150 Point to point and point to ground: 106 to 109 ohmsResistance in Combination with a Person ANSI/ESD STM 97.1 At 12% R.H. with Dissipative footwear: 106 to 109 ohms
Static Generation ANSI/ESD STM 97.2 At 40% R.H. with Dissipative footwear: < 10 volts. At 12% R.H. with Dissipative footwear: < 10 volts
Static Dissipation ETS Dissipation At 12% R.H. with Dissipative footwear: 1000 to 100 volts: 0.2 seconds avg
Instructions:Quantities to be verified by installer.•Material must be contract quality and suitable for commercial use.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Tru by Hilton
SPT-01Page 1
13Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Static Dissipative Tile @ PBXItem Number: SPT-01
Item Quantity:
Manufacturer: Armstrong Flooring Source: Armstrong FlooringInstructions:
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Tru by Hilton
SPT-01Page 2
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Quartz @ Command Center, Breakfast,
Employee Breakroom Counters, and Public Space Window Sills
Item Number: ST-01
Item Quantity:
Manufacturer: LG Hausys America, Inc Source: LG Hausys America, Inc
Revision(s):
Contact: Michelle Allen
Phone: (615) 426-5749Fax:
Address: 900 Circle 75 ParkwaySuite 1500Atlanta GA 30339-
Address: 900 Circle 75 ParkwaySuite 1500Atlanta GA 30339-
Contact: Michelle AllenE-mail: mallen@lghausys.comE-mail: mallen@lghausys.com
800#: (800) 320-3508
Web: www.nustone.comWeb: www.nustone.com
Phone: (513) 214-9939Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Viatera Quartz StoneColor/Finish: Snow StormSize/Dimensions: Refer to architectural drawings for details and
dimensions
Instructions:To include clear matte sealer to protect from staining and water absorption.•Stone installation to meet all requirements per MIA standards.•Must be contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Quantities to be verified by installer.•
Tru by Hilton
ST-01Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Floor Tile @ Guest Bath and Public
Restrooms (OPTION A)
Item Number: T-01-A
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Daltile- Nancy Burns
Revision(s):
Contact: Nancy Burns
Phone: (404) 661-7111Fax:
Address:
Address: 7834 C.F. Hawn FrwyDallas TX 75217-
Contact:E-mail: nancy.burns@daltile.comE-mail:Web: www.dal-tile.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Kimona Silk Colorbody Porcelain / P327Color/Finish: Panda BlackSize/Dimensions: 12" x 24"
Coeff Friction: D.C.O.F. > 0.42 Dry or WetGrout: Mapei; 10 Black, 1/8"
Notes: To be installed in a running bond - overlapping tiles 33%.
Instructions:Quantities to be verified by installer.•Material must be contract quality and suitable for commercial use.•Grout to include clear matte sealer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Tru by Hilton
T-01-APage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Floor Tile @ Guest Bath and Public
Restrooms (OPTION B)
Item Number: T-01-B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Ceramic Technics Ltd.
Revision(s):
Contact: Leslie Weinberg
Phone: (770) 740-0050Fax: (770) 740-1199
Address:
Address: 1298 Old Alpharetta RoadAlpharetta GA 30005-
Contact:E-mail: lweinberg@ceramictechnics.comE-mail:Web: www.ceramictechnics.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Fusion Porcelain FabrikColor/Finish: Midnight / Honed FinishSize/Dimensions: 12" x 24" x 11/32" Thick
Coeff Friction: Wet: 0.68, Dry: 0.71Grout: Mapei; 10 Black, 1/8"
Notes: To be installed in a running bond - overlapping tiles 33%.
Instructions:Quantities to be verified by installer.•Material must be contract quality and suitable for commercial use.•Grout to include clear matte sealer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Tru by Hilton
T-01-BPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Wall Tile @ Breakfast Buffet (OPTION
A)
Item Number: T-02-A
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Ceramic Technics Ltd.
Revision(s):
Contact: Leslie Weinberg
Phone: (770) 740-0050Fax: (770) 740-1199
Address:
Address: 1298 Old Alpharetta RoadAlpharetta GA 30005-
Contact:E-mail: lweinberg@ceramictechnics.comE-mail:Web: www.ceramictechnics.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Sassuolo Stone TonesColor/Finish: Azure/ GlossySize/Dimensions: 3" x 12"
Grout: Mapei; 38 Avalanche, 1/8"
Notes: Installation Pattern: 50/50 Brick Running Bond
Instructions:Quantities to be verified by installer.•Material must be contract quality and suitable for commercial use.•Grout to include clear matte sealer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Tru by Hilton
T-02-APage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Wall Tile @ Breakfast Buffet (OPTION
B)
Item Number: T-02-B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Daltile- Nancy Burns
Revision(s):
Contact: Nancy Burns
Phone: (404) 661-7111Fax:
Address:
Address: 7834 C.F. Hawn FrwyDallas TX 75217-
Contact:E-mail: nancy.burns@daltile.comE-mail:Web: www.dal-tile.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Rittenhouse SquareColor/Finish: 0148 Spa/ Semi-GlossSize/Dimensions: 3" x 6"
Coeff Friction: <0.50 Wet <0.80 DryGrout: Mapei; 77 Frost, 1/8"
Notes: Installation Pattern: 50/50 Brick Running Bond
Instructions:Quantities to be verified by installer.•Material must be contract quality and suitable for commercial use.•Grout to include clear matte sealer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Tru by Hilton
T-02-BPage 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Wall Tile @ Public RestroomsItem Number: T-03
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Daltile- Nancy Burns
Revision(s):
Contact: Nancy Burns
Phone: (404) 661-7111Fax:
Address:
Address: 7834 C.F. Hawn FrwyDallas TX 75217-
Contact:E-mail: nancy.burns@daltile.comE-mail:Web: www.dal-tile.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Rittenhouse SquareColor/Finish: 0190 Artic White/ Semi-GlossSize/Dimensions: 3" x 6"
Coeff Friction: <0.50 Wet <0.80 DryGrout: Mapei; 10 Black, 1/8"
Notes: Installation Pattern: 50/50 Brick Running Bond
Instructions:Quantities to be verified by installer.•Material must be contract quality and suitable for commercial use.•Grout to include clear matte sealer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Tru by Hilton
T-03Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Floor Tile @ ADA Roll- In ShowerItem Number: T-04
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Daltile- Nancy Burns
Revision(s):
Contact: Nancy Burns
Phone: (404) 661-7111Fax:
Address:
Address: 7834 C.F. Hawn FrwyDallas TX 75217-
Contact:E-mail: nancy.burns@daltile.comE-mail:Web: www.dal-tile.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Kimona Silk Colorbody Porcelain / P327Color/Finish: Panda BlackSize/Dimensions: 2" x 2"
Coeff Friction: D.C.O.F. > 0.42 Dry or WetGrout: Mapei; 10 Black, 1/8"
Notes: Mesh-mounted on 12 x 12 sheets
Instructions:Quantities to be verified by installer.•Material must be contract quality and suitable for commercial use.•Grout to include clear matte sealer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Tru by Hilton
T-04Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Floor Tile @ Vestibule, 1st Flr Elev.
Lobby, Elev. Cabs, Breakroom, and Guest Laundry (OPTION A)
Item Number: T-05-A
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Daltile- Nancy Burns
Revision(s):
Contact: Nancy Burns
Phone: (404) 661-7111Fax:
Address:
Address: 7834 C.F. Hawn FrwyDallas TX 75217-
Contact:E-mail: nancy.burns@daltile.comE-mail:Web: www.dal-tile.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: ImagicaColor/Finish: Haze IG97/ UnpolishedSize/Dimensions: 12" x 24"
Coeff Friction: D.C.O.F. ≥ 0.42Grout: Mapei; 02 Pewter, 1/8"
Notes: To be installed in a running bond - overlapping tiles 33%.
Instructions:Quantities to be verified by installer.•Material must be contract quality and suitable for commercial use.•Grout to include clear matte sealer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Tru by Hilton
T-05-APage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Floor Tile @ Vestibule, 1st Flr Elev.
Lobby, Elev. Cabs, Breakroom, and Guest Laundry (OPTION B)
Item Number: T-05-B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Ceramic Technics Ltd.
Revision(s):
Contact: Leslie Weinberg
Phone: (770) 740-0050Fax: (770) 740-1199
Address:
Address: 1298 Old Alpharetta RoadAlpharetta GA 30005-
Contact:E-mail: lweinberg@ceramictechnics.comE-mail:Web: www.ceramictechnics.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Fiorano USA TuscanyColor/Finish: BiancoSize/Dimensions: 12" x 24"
Coeff Friction: D.C.O.F. ≥ 0.42Grout: Mapei; 02 Pewter, 1/8"
Notes: To be installed in a running bond - overlapping tiles 33%.
Instructions:Quantities to be verified by installer.•Material must be contract quality and suitable for commercial use.•Grout to include clear matte sealer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Tru by Hilton
T-05-BPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Floor Tile @ Vestibule, 1st Flr Elev.
Lobby, Elev. Cabs, Breakroom, and Guest Laundry (OPTION C)
Item Number: T-05-C
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Shaw Industries
Revision(s):
Contact: Nancy Dickinson
Phone: (513) 673-3600Fax:
Address:
Address: 185 South Industrial Blvd.Calhoun GA 30701-
Contact:E-mail: nancy@dickinsoncontract.comE-mail:Web: www.shawcontractgroup.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: *CT885 SubstanceColor/Finish: 04114 Fog / MatteSize/Dimensions: 12" x 24"
Coeff Friction: D.C.O.F. > 0.42Grout: Mapei; 35 Navajo Brown, 3/16"
Notes: To be installed in a running bond - overlapping tiles 33%.
Instructions:Quantities to be verified by installer•Material must be contract quality and suitable for commercial use•Grout to include clear matte sealer•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Tru by Hilton
T-05-CPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Quarry Tile @ Food Prep & Food
Storage
Item Number: T-06
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Daltile- Nancy Burns
Revision(s):
Contact: Nancy Burns
Phone: (404) 661-7111Fax:
Address:
Address: 7834 C.F. Hawn FrwyDallas TX 75217-
Contact:E-mail: nancy.burns@daltile.comE-mail:Web: www.dal-tile.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Quarry Tile/ 0Q42Color/Finish: Arid Gray/ Abrasive GrainSize/Dimensions: 6" x 6"
Coeff Friction: ≥ 0.42Grout: Mapei; 04 Bahama Beige, 1/8"
Instructions:Quantities to be verified by installer.•Material must be contract quality and suitable for commercial use.•Grout to include clear matte sealer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Tru by Hilton
T-06Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Floor Tile @ Indoor PoolItem Number: T-07
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Daltile- Nancy Burns
Revision(s):
Contact: Nancy Burns
Phone: (404) 661-7111Fax:
Address:
Address: 7834 C.F. Hawn FrwyDallas TX 75217-
Contact:E-mail: nancy.burns@daltile.comE-mail:Web: www.dal-tile.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Exhibition / EX04Color/Finish: Dark Grey / TexturedSize/Dimensions: 12" x 12"
Coeff Friction: Wet: >0.65; Dry: >0.80Grout: Mapei; 47 Charcoal, 1/8"
Notes: To be installed in a stacked bond pattern.
Instructions:Quantities to be verified by installer.•Material must be contract quality and suitable for commercial use.•Grout to include clear matte sealer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Tru by Hilton
T-07Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Accent Floor Tile @ PatioItem Number: T-08
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Daltile- Nancy Burns
Revision(s):
Contact: Nancy Burns
Phone: (404) 661-7111Fax:
Address:
Address: 7834 C.F. Hawn FrwyDallas TX 75217-
Contact:E-mail: nancy.burns@daltile.comE-mail:Web: www.dal-tile.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Exhibition / EX05Color/Finish: Black / TexturedSize/Dimensions: 12" x 24"
Coeff Friction: Wet: >0.65; Dry: >0.80Grout: Mapei; 47 Charcoal, 1/8"
Notes: Refer to architectural drawings for installation pattern.
Instructions:Quantities to be verified by installer.•Material must be contract quality and suitable for commercial use.•Grout to include clear matte sealer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Tru by Hilton
T-08Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Mosaic Accent Tile @ Pool WaterlineItem Number: T-09
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Daltile- Nancy Burns
Revision(s):
Contact: Nancy Burns
Phone: (404) 661-7111Fax:
Address:
Address: 7834 C.F. Hawn FrwyDallas TX 75217-
Contact:E-mail: nancy.burns@daltile.comE-mail:Web: www.dal-tile.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Retro Rounds / RR07Color/Finish: Daffodil Yellow / MatteSize/Dimensions: 12" x 12" sheet x 3/16" Thick
Coeff Friction: DCOF: <0.42Grout: Mapei; 77 Frost
Notes: *Cut tile to match the height of pool depth marker tile
Refer to architectural drawings for more information.
Instructions:Quantities to be verified by installer.•Material must be contract quality and suitable for commercial use.•Grout to include clear matte sealer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Tru by Hilton
T-09Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Floor Tile A @ Outdoor PatioItem Number: T-10
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Daltile- Nancy Burns
Revision(s):
Contact: Nancy Burns
Phone: (404) 661-7111Fax:
Address:
Address: 7834 C.F. Hawn FrwyDallas TX 75217-
Contact:E-mail: nancy.burns@daltile.comE-mail:Web: www.dal-tile.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Exhibition / EX02Color/Finish: Grey / TexturedSize/Dimensions: 24" x 48"
Coeff Friction: Wet: >0.65; Dry: >0.80Grout: Mapei; 47 Charcoal, 1/8"
Notes: To be installed in a stacked bond pattern.
Instructions:Quantities to be verified by installer.•Material must be contract quality and suitable for commercial use.•Grout to include clear matte sealer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Tru by Hilton
T-10Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Floor Tile B @ Outdoor PatioItem Number: T-11
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Daltile- Nancy Burns
Revision(s):
Contact: Nancy Burns
Phone: (404) 661-7111Fax:
Address:
Address: 7834 C.F. Hawn FrwyDallas TX 75217-
Contact:E-mail: nancy.burns@daltile.comE-mail:Web: www.dal-tile.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Exhibition / EX03Color/Finish: Trend Grey / TexturedSize/Dimensions: 24" x 48"
Coeff Friction: Wet: >0.65; Dry: >0.80Grout: Mapei; 47 Charcoal, 1/8"
Notes: To be installed in a stacked bond pattern.
Instructions:Quantities to be verified by installer.•Material must be contract quality and suitable for commercial use.•Grout to include clear matte sealer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Tru by Hilton
T-11Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Depth Marker Tile @ PoolItem Number: T-13
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Daltile
Revision(s):
Contact: Marsha McCauley, Architectural Representative
Phone: (513) 759-9325Fax: (513) 791-8944
Address:
Address: 4650 Lake Forest DriveSuite 540Cincinnati OH 45242 United States of America
Contact:E-mail: marsha.mccauley@daltile.comE-mail:Web: www.daltile.com/Web:
Mobile: (513) 460-1168Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: *Keystone Mosiac Depth MarkersColor/Finish: *White with Black NumbersSize/Dimensions: *6" x 6" with 4" H numbers and letters
Grout: *Mapei; *77 Frost, *1/8"
Instructions:Quantities to be verified by installer.•Material must be contract quality and suitable for commercial use.•Grout to include clear matte sealer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Tru by Hilton
T-13Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Glass Shower Enclosure @ Guest
Shower (OPTION A)
Item Number: TA-01-A
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Belstone
Revision(s):
Contact: Adam Smith
Phone: (818) 373-4900Fax: (818) 373-4901
Address:
Address: 7658 Haskell AvenueVan Nuys CA 91406-
Contact:E-mail: adam@belstoneproducts.comE-mail:Web: www.belstoneproducts.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Custom shower enclosure - Refer to architectural drawings
Color/Finish: Stainless Steel HardwareSize/Dimensions: 48"OAW; 28"W x 72"H Pivot Door and 12"W Fixed
Side Panel
Notes: FABRICATOR MUST VERIFY FIELD MEASUREMENTS PRIOR TO FABRICATION.
Pivot door and fixed side panel to be 10mm thick tempered glass. Pivot door to be wall mounted. Handle MUST be included and installed horizontally. Refer to architectural drawings for location of right or left handed door.
Fixed side panel to extend to ceiling.
Provide 18"W horizontal door handle, mounted 36-1/8" above shower pan surface/ stainless steel finish.
Provide all associated hardware required. Any exposed hardware to be stainless steel finish.
Refer to architectural drawings for further details.
Instructions:
Tru by Hilton
TA-01-APage 1
13Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Glass Shower Enclosure @ Guest
Shower (OPTION A)
Item Number: TA-01-A
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: BelstoneInstructions:
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-01-APage 2
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Glass Shower Enclosure @ Guest
Shower (OPTION B)
Item Number: TA-01-B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Mincey Marble Manufacturing Inc.
Revision(s):
Contact: Donna Mincey
Phone: (678) 997-2770Fax: (770) 531-0935
Address:
Address: 4321 Browns Bridge Rd.Gainesville GA 30504-
Contact:E-mail: dmincey@minceymarble.comE-mail:
800#: (800) 533-1806
Web: www.minceymarble.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Hinged Shower Door w/ Fixed Side Panel / MM-HINGED-PS-10M
Color/Finish: Polished Silver HardwareSize/Dimensions: 48"OAW; 28-3/8"W x 75"H Pivot Door and an approx.
12"W Fixed Side Panel (height - V.I.F.)
Notes: FABRICATOR MUST VERIFY FIELD MEASUREMENTS PRIOR TO FABRICATION.
Pivot door and fixed side panel to be 10mm thick clear tempered glass. Pivot door to be wall mounted.
Handle MUST be included and installed horizontally - measuring 18"W x 2"D x 1"DIA mounted 36-1/8" above shower pan surface/ stainless steel finish. Refer to architectural drawings for location of right or left handed doors.
Fixed side panel to extend to ceiling. Verify ceiling height prior to fabrication.
Provide all associated hardware required. Any exposed hardware to be stainless steel finish.
Refer to architectural drawings for further details.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Tru by Hilton
TA-01-BPage 1
13Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Glass Shower Enclosure @ Guest
Shower (OPTION B)
Item Number: TA-01-B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Mincey Marble Manufacturing Inc.Instructions:
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-01-BPage 2
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Glass Shower Enclosure @ Guest
Shower (OPTION C)
Item Number: TA-01-C
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Mincey Marble Manufacturing Inc.
Revision(s):
Contact: Donna Mincey
Phone: (678) 997-2770Fax: (770) 531-0935
Address:
Address: 4321 Browns Bridge Rd.Gainesville GA 30504-
Contact:E-mail: dmincey@minceymarble.comE-mail:
800#: (800) 533-1806
Web: www.minceymarble.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Hinged Shower Door w/ Header / MM-Hinged-PS-10MColor/Finish: Polished FinishSize/Dimensions: Overall Door: 28-3/8"W x 75"H, with (1) Fixed Panel
w/ header x 78"H
Notes: FABRICATOR MUST VERIFY FIELD MEASUREMENTS PRIOR TO FABRICATION.
Pivot door and fixed side panel to be 10mm thick tempered glass. Pivot door to be wall mounted.
Handle MUST be included and installed horizontally - measuring 18"W x 2"D x 1"DIA mounted 36-1/8" above shower pan surface/ stainless steel finish. Refer to architectural drawings for location of right or left handed doors.
Fixed panel to be mounted in enclosed frame with header. OAH is 78" Verify all dimensions in field prior to production.
Provide all associated hardware required. Any exposed hardware to be stainless steel finish.
Refer to architectural drawings for further details.
Instructions:
Tru by Hilton
TA-01-CPage 1
13Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Glass Shower Enclosure @ Guest
Shower (OPTION C)
Item Number: TA-01-C
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Mincey Marble Manufacturing Inc.Instructions:
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-01-CPage 2
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Shower Surround @ Guest Bath
(OPTION A)
Item Number: TA-02-A
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Kohler Company
Revision(s):
Contact: Doug Johnston
Phone:Fax:
Address:
Address: 444 Highland DriveKohler WI 53044-
Contact:E-mail: douglas.johnston@kohler.comE-mail:Web: ww.kohler.comWeb:
Mobile: (972) 342-8026Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Choreograph / Brick TextureColor/Finish: T01-0 White / Matte finishSize/Dimensions: See Notes
Notes: Panels to extend from top of shower pan to ceiling - cut in field as required.Finished edge of side walls to align with front edge of shower pan.
CONTRACTOR MUST COORDINATE WALL PANEL SIZES WITH SHOWER OPENING.Refer to architectural drawings for locations.
Provide the following:(2) 36"W x 96"H Brick Texture Wall Panels(1) 48"W x 96"H Brick Texture Wall Panel (at standard shower enclosures)(1) 60"W x 96"H Brick Texture Wall Panel (at accessible shower enclosures)(2) 96"H corner joints #K-97635-0 / color WHITE
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
Tru by Hilton
TA-02-APage 1
13Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Shower Surround @ Guest Bath
(OPTION A)
Item Number: TA-02-A
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Kohler CompanyInstructions:
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-02-APage 2
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Shower Surround @ Guest Bath
(OPTION B)
Item Number: TA-02-B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Mincey Marble Manufacturing Inc.
Revision(s):
Contact: Donna Mincey
Phone: (678) 997-2770Fax: (770) 531-0935
Address:
Address: 4321 Browns Bridge Rd.Gainesville GA 30504-
Contact:E-mail: dmincey@minceymarble.comE-mail:
800#: (800) 533-1806
Web: www.minceymarble.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: 3" x 6" Subway Vintage Panel System / TS-VN/3x6Color/Finish: 2250 Solid White / Gloss FinishSize/Dimensions: See Notes
Notes: Panels to extend from top of shower pan to ceiling - cut in field as required.Finished edge of side walls to align with front edge of shower pan.
CONTRACTOR MUST COORDINATE WALL PANEL SIZES WITH SHOWER OPENING.Refer to architectural drawings for locations.
Provide the following:(2) 38"W x 97"H 3x6 Subway Panels(1) 50"W x 97"H 3x6 Subway Panel (at standard shower enclosures)(1) 66"W x 97"H 3x6 Subway Panel (at accessible shower enclosures)
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
Tru by Hilton
TA-02-BPage 1
13Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Shower Surround @ Guest Bath
(OPTION B)
Item Number: TA-02-B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Mincey Marble Manufacturing Inc.Instructions:
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-02-BPage 2
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Shower Surround @ Guest Bath
(OPTION C)
Item Number: TA-02-C
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: MPL Corporation
Revision(s):
Contact: Jennifer Heath
Phone: (317) 835-9000Fax: (317) 835-3050
Address:
Address: 203 N. Edgerton StreetFairland IN 46126-
Contact:E-mail: jheath@mpl-corp.comE-mail:Web: www.mpl-corp.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: 6" x 24" Smooth TileColor/Finish: Bright White/ GlossySize/Dimensions: See Notes
Notes: Panels to extend from top of shower pan to ceiling - cut in field as required.Finished edge of side walls to align with front edge of shower pan.
CONTRACTOR MUST COORDINATE WALL PANEL SIZES WITH SHOWER OPENING.Refer to architectural drawings for locations.
Provide the following:(2) 34"W x 96"H Wall Panels(1) 48"W x 96"H Wall Panel (at standard shower enclosures)(1) 60"W x 96"H Wall Panel (at accessible shower enclosures)
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Plumbing Sub-Contractor is responsible for providing all plumbing hardware not specified but required for the completeinstallation of each item. Any plumbing hardware that is exposed to view must match the finish of any trim specified.
•
Tru by Hilton
TA-02-CPage 1
13Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Shower Surround @ Guest Bath
(OPTION C)
Item Number: TA-02-C
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: MPL CorporationInstructions:
Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-02-CPage 2
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Dual Toilet Paper Holder @ Guest Bath
(OPTION A)
Item Number: TA-03-A
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Bobrick Washroom Equipment
Revision(s):
Contact: Customer Service
Phone: (818) 764-1000Fax: (818) 765-2700
Address:
Address: 11611 Hart St.N. Hollywood CA 91605-
Contact:E-mail: customerservicela@bobrick.comE-mail:Web: http://www.bobrick.com/Bobrick/Web:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Recessed Toilet Tissue Dispenser / B-6977Color/Finish: Satin Stainless SteelSize/Dimensions: 12-5/16"W x 6-1/8"H
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-03-APage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Dual Toilet Paper Holder @ Guest Bath
(OPTION B)
Item Number: TA-03-B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Gatco, Inc.
Revision(s):
Contact: Michael I. Goffstein
Phone: (800) 227-5640Fax: (510) 895-5676
Address:
Address: 1550 Factor AvenueSan Leandro CA 94577 United States of America
Contact:E-mail: michael@gatcoinc.comE-mail:Web: www.gatcoinc.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Recessed Toilet Tissue Dispenser / 782AColor/Finish: ChromeSize/Dimensions: 12-1/4"W x 6-1/2"H
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-03-BPage 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Footrest @ Guest Shower (OPTION A)Item Number: TA-04-A
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: WingIt Innovations, LLC
Revision(s):
Contact: Salvatore Sisto
Phone: (732) 869-4466Fax: (732) 869-9474
Address:
Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-
Contact:E-mail: sal@wingits.comE-mail:
800#: (877) 894-6448
Web: www.wingits.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Tubular Corner Foot Rest / #WFRTCColor/Finish: Stainless SteelSize/Dimensions: 8"W x 1.25"DIA x 8" Projection
Notes: Includes anti-slip grip.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-04-APage 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Footrest @ Guest Shower (OPTION B)Item Number: TA-04-B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Mincey Marble Manufacturing Inc.
Revision(s):
Contact: Donna Mincey
Phone: (678) 997-2770Fax: (770) 531-0935
Address:
Address: 4321 Browns Bridge Rd.Gainesville GA 30504-
Contact:E-mail: dmincey@minceymarble.comE-mail:
800#: (800) 533-1806
Web: www.minceymarble.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: 15" Foot Rest / FR-05Color/Finish: White / Textured and Gloss FinishSize/Dimensions: 15"W x 4-3/4"D (Tapers to 1/2") x 1-1/2"H
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-04-BPage 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Footrest @ Guest Shower (OPTION C)Item Number: TA-04-C
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: MPL Corporation
Revision(s):
Contact: Jennifer Heath
Phone: (317) 835-9000Fax: (317) 835-3050
Address:
Address: 203 N. Edgerton StreetFairland IN 46126-
Contact:E-mail: jheath@mpl-corp.comE-mail:Web: www.mpl-corp.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Accessory Shelf/ EXG-175.2Color/Finish: Bight White/ GlossySize/Dimensions: 15"L x 3"D (Tapers to1-3/8"D) x 1-1/2"H
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-04-CPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Decorative Grab Bar @ Guest Bath
Shower (OPTION A)
Item Number: TA-06-A
Item Quantity:
Manufacturer: WingIt Innovations, LLC Source: WingIt Innovations, LLC
Revision(s):
Contact: Salvatore Sisto
Phone: (732) 869-4466Fax: (732) 869-9474
Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-
Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-
Contact: Salvatore SistoE-mail: sal@wingits.comE-mail: sal@wingits.com
800# : (877) 894-6448 800#: (877) 894-6448
Web: www.wingits.comWeb: www.wingits.com
Phone: (732) 869-4466Fax: (732) 869-9474
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: WGB5MEPS24/ Modern Elegance Grab BarColor/Finish: Stainless Steel/ Polished FinishSize/Dimensions: 24"W x 2"H x 2.75"D
Notes: Refer to architectural drawings for location and mounting height.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-06-APage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Decorative Grab Bar @ Guest Bath
Shower (OPTION B)
Item Number: TA-06-B
Item Quantity:
Manufacturer: Grohe Source: Grohe
Revision(s):
Contact: Jennifer Humphrey
Phone: (312) 918-8142Fax:
Address: 200 N. Gary Avenue, Suite GRoselle IL 60172-
Address: 200 N. Gary Avenue, Suite GRoselle IL 60172-
Contact:E-mail: jennifer.humphrey@grohe.comE-mail:
800# : (800) 444-7649 800#: (800) 444-7649
Web: www.grohe.comWeb: www.grohe.com
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: 40794001/ Essentials Grab BarColor/Finish: 001 ChromeSize/Dimensions: 24"W x 3.66"D
Notes: Refer to architectural drawings for location and mounting height.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-06-BPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Decorative Grab Bar @ Guest Bath
Shower (OPTION C)
Item Number: TA-06-C
Item Quantity:
Manufacturer: Gatco, Inc. Source: Gatco, Inc.
Revision(s):
Contact: Michael I. Goffstein
Phone: (800) 227-5640Fax: (510) 895-5676
Address: 1550 Factor AvenueSan Leandro CA 94577 United States of America
Address: 1550 Factor AvenueSan Leandro CA 94577 United States of America
Contact: Michael I. GoffsteinE-mail: michael@gatcoinc.comE-mail: michael@gatcoinc.com
800# : (800) 227-5640
Web: www.gatcoinc.comWeb: www.gatcoinc.com
Phone:Fax: (510) 895-5676
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: 854/ 24" Latitude Grab barColor/Finish: ChromeSize/Dimensions: 24"W x 3"H x 2.8"D
Notes: Refer to architectural drawings for location and mounting height.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-06-CPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Decorative Grab Bar @ Guest Bath
Shower (OPTION D)
Item Number: TA-06-D
Item Quantity:
Manufacturer: Kohler Company Source: Kohler Company
Revision(s):
Contact: Doug Johnston
Phone:
Fax:
Address: 444 Highland DriveKohler WI 53044 United States of America
Address: 444 Highland DriveKohler WI 53044-
Contact: Doug JohnstonE-mail: douglas.johnston@kohler.comE-mail: douglas.johnston@kohler.com
800# : (805) 402-1335
Web: ww.kohler.comWeb: http://www.kohler.com
Mobile: (972) 342-8026
Phone: (800) 421-9559 voice mail
Fax: (805) 496-0129
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Purist 24" Grab Bar / K-11893-SColor/Finish: Polished StainlessSize/Dimensions: 24"W x 2-3/4"D x 2-7/16"H
Notes: Refer to architectural drawings for location and mounting height.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-06-DPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Paper Towel Dispenser @ Public
Restroom (OPTION A)
Item Number: TA-07-A
Item Quantity:
Manufacturer: Georgia-Pacific Professional Source: Georgia-Pacific Professional
Revision(s):
Contact: Perry Harding
Phone: (609) 607-9790Fax:
Address: 133 Peachtree St. NEAtlanta GA 30303-
Address: 133 Peachtree St. NEAtlanta GA 30303-
Contact: Perry HardingE-mail: perry.harding@gapac.comE-mail: perry.harding@gapac.com
800# : (866) 435-5647 800#: (866) 435-5647
Web: http://www.gppro.comWeb: http://www.gppro.com
Phone: (609) 907-9790Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: enMotion Recessed Automated Touchless Towel Dispenser/ 59466
Color/Finish: Stainless SteelSize/Dimensions: 13"W x 8"D x 16.4"H
Notes: Refer to architectural drawings for location and mounting height.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-07-APage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Toilet Paper Holder @ Public Restroom
(OPTION A)
Item Number: TA-08-A
Item Quantity:
Manufacturer: Bobrick Washroom Equipment Source: Bobrick Washroom Equipment
Revision(s):
Contact: Customer Service
Phone: (818) 764-1000Fax: (818) 765-2700
Address: 11611 Hart St.N. Hollywood CA 91605-
Address: 11611 Hart St.N. Hollywood CA 91605-
Contact: Customer ServiceE-mail: customerservicela@bobrick.comE-mail: customerservicela@bobrick.comWeb: http://www.bobrick.com/Bobrick/Web: http://www.bobrick.com/Bobrick/
Phone: (818) 764-1000Fax: (818) 765-2700
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Recessed Multi-Roll Toilet Tissue Dispenser / B-4388Color/Finish: Satin StainlessSize/Dimensions: 7-9/16"W x 12-1/2"H
Notes: Refer to architectural drawings for location and mounting height.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-08-APage 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: 18" Accessible Grab Bar (OPTION A)Item Number: TA-10-A
Item Quantity:
Manufacturer: WingIt Innovations, LLC Source: WingIt Innovations, LLC
Revision(s):
Contact: Salvatore Sisto
Phone: (732) 869-4466Fax: (732) 869-9474
Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-
Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-
Contact: Salvatore SistoE-mail: sal@wingits.comE-mail: sal@wingits.com
800# : (877) 894-6448 800#: (877) 894-6448
Web: www.wingits.comWeb: www.wingits.com
Phone: (732) 869-4466Fax: (732) 869-9474
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Grab Bar/ WGB5SS18Color/Finish: Satin Stainless SteelSize/Dimensions: 18"W x 1.25"DIA x 2.75"D
Notes: Refer to architectural drawings for location and mounting heights.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-10-APage 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: 18" Accessible Grab Bar (OPTION B)Item Number: TA-10-B
Item Quantity:
Manufacturer: Grohe Source: Grohe
Revision(s):
Contact: Jennifer Humphrey
Phone: (312) 918-8142Fax:
Address: 200 N. Gary Avenue, Suite GRoselle IL 60172-
Address: 200 N. Gary Avenue, Suite GRoselle IL 60172-
Contact:E-mail: jennifer.humphrey@grohe.comE-mail:
800# : (800) 444-7649 800#: (800) 444-7649
Web: www.grohe.comWeb: www.grohe.com
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: 40793001Color/Finish: 001 ChromeSize/Dimensions: 18"W x 3.66"D
Notes: Refer to architectural drawings for location and mounting heights.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-10-BPage 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: 18" Accessible Grab Bar (OPTION C)Item Number: TA-10-C
Item Quantity:
Manufacturer: Gatco, Inc. Source: Gatco, Inc.
Revision(s):
Contact: Michael I. Goffstein
Phone: (800) 227-5640Fax: (510) 895-5676
Address: 1550 Factor AvenueSan Leandro CA 94577 United States of America
Address: 1550 Factor AvenueSan Leandro CA 94577 United States of America
Contact: Michael I. GoffsteinE-mail: michael@gatcoinc.comE-mail: michael@gatcoinc.com
800# : (800) 227-5640
Web: www.gatcoinc.comWeb: www.gatcoinc.com
Phone:Fax: (510) 895-5676
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Latitude Grab Bar/ 852Color/Finish: ChromeSize/Dimensions: 18"W x 3"H (mounting plate) x 1.25"DIA x 2.8"D
Notes: Refer to architectural drawings for location and mounting heights.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-10-CPage 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: 18" Accessible Grab Bar (OPTION D)Item Number: TA-10-D
Item Quantity:
Manufacturer: Bobrick Washroom Equipment Source: Bobrick Washroom Equipment
Revision(s):
Contact: Customer Service
Phone: (818) 764-1000Fax: (818) 765-2700
Address: 11611 Hart St.N. Hollywood CA 91605-
Address: 11611 Hart St.N. Hollywood CA 91605-
Contact: Customer ServiceE-mail: customerservicela@bobrick.comE-mail: customerservicela@bobrick.comWeb: http://www.bobrick.com/Bobrick/Web: http://www.bobrick.com/Bobrick/
Phone: (818) 764-1000Fax: (818) 765-2700
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Grab Bar / B-5806 x 18Color/Finish: Satin StainlessSize/Dimensions: 18"W x 1-1/4"DIA
Notes: Refer to architectural drawings for location and mounting heights.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-10-DPage 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: 36" Accessible Grab Bar (OPTION A)Item Number: TA-11-A
Item Quantity:
Manufacturer: WingIt Innovations, LLC Source: WingIt Innovations, LLC
Revision(s):
Contact: Salvatore Sisto
Phone: (732) 869-4466Fax: (732) 869-9474
Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-
Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-
Contact: Salvatore SistoE-mail: sal@wingits.comE-mail: sal@wingits.com
800# : (877) 894-6448 800#: (877) 894-6448
Web: www.wingits.comWeb: www.wingits.com
Phone: (732) 869-4466Fax: (732) 869-9474
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Grab Bar/ WGB5SS36Color/Finish: Satin Stainless SteelSize/Dimensions: 36"W x 1.25"DIA x 2.75"D
Notes: Refer to architectural drawings for location and mounting heights.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-11-APage 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: 36" Accessible Grab Bar (OPTION B)Item Number: TA-11-B
Item Quantity:
Manufacturer: Grohe Source: Grohe
Revision(s):
Contact: Jennifer Humphrey
Phone: (312) 918-8142Fax:
Address: 200 N. Gary Avenue, Suite GRoselle IL 60172-
Address: 200 N. Gary Avenue, Suite GRoselle IL 60172-
Contact:E-mail: jennifer.humphrey@grohe.comE-mail:
800# : (800) 444-7649 800#: (800) 444-7649
Web: www.grohe.comWeb: www.grohe.com
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: 40795001Color/Finish: 001 ChromeSize/Dimensions: 36"W x 3.66"D
Notes: Refer to architectural drawings for location and mounting heights.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-11-BPage 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: 36" Accessible Grab Bar (OPTION C)Item Number: TA-11-C
Item Quantity:
Manufacturer: Gatco, Inc. Source: Gatco, Inc.
Revision(s):
Contact: Michael I. Goffstein
Phone: (800) 227-5640Fax: (510) 895-5676
Address: 1550 Factor AvenueSan Leandro CA 94577 United States of America
Address: 1550 Factor AvenueSan Leandro CA 94577 United States of America
Contact: Michael I. GoffsteinE-mail: michael@gatcoinc.comE-mail: michael@gatcoinc.com
800# : (800) 227-5640
Web: www.gatcoinc.comWeb: www.gatcoinc.com
Phone:Fax: (510) 895-5676
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Latitude Grab Bar/ 856Color/Finish: ChromeSize/Dimensions: 36"W x 3"H (mounting plate) x 1.25"DIA x 2.8"D
Notes: Refer to architectural drawings for location and mounting heights.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-11-CPage 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: 36" Accessible Grab Bar (OPTION D)Item Number: TA-11-D
Item Quantity:
Manufacturer: Bobrick Washroom Equipment Source: Bobrick Washroom Equipment
Revision(s):
Contact: Customer Service
Phone: (818) 764-1000Fax: (818) 765-2700
Address: 11611 Hart St.N. Hollywood CA 91605-
Address: 11611 Hart St.N. Hollywood CA 91605-
Contact: Customer ServiceE-mail: customerservicela@bobrick.comE-mail: customerservicela@bobrick.comWeb: http://www.bobrick.com/Bobrick/Web: http://www.bobrick.com/Bobrick/
Phone: (818) 764-1000Fax: (818) 765-2700
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Grab Bar / B-5806 x 36Color/Finish: Satin StainlessSize/Dimensions: 36"W x 1-1/4"DIA
Notes: Refer to architectural drawings for location and mounting heights.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-11-DPage 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: 42" Accessible Grab Bar (OPTION A)Item Number: TA-12-A
Item Quantity:
Manufacturer: WingIt Innovations, LLC Source: WingIt Innovations, LLC
Revision(s):
Contact: Salvatore Sisto
Phone: (732) 869-4466Fax: (732) 869-9474
Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-
Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-
Contact: Salvatore SistoE-mail: sal@wingits.comE-mail: sal@wingits.com
800# : (877) 894-6448 800#: (877) 894-6448
Web: www.wingits.comWeb: www.wingits.com
Phone: (732) 869-4466Fax: (732) 869-9474
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Grab Bar/ WGB5SS42Color/Finish: Satin Stainless SteelSize/Dimensions: 42"W x 1.25"DIA x 2.75"D
Notes: Refer to architectural drawings for location and mounting heights.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-12-APage 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: 42" Accessible Grab Bar (OPTION B)Item Number: TA-12-B
Item Quantity:
Manufacturer: Grohe Source: Grohe
Revision(s):
Contact: Jennifer Humphrey
Phone: (312) 918-8142Fax:
Address: 200 N. Gary Avenue, Suite GRoselle IL 60172-
Address: 200 N. Gary Avenue, Suite GRoselle IL 60172-
Contact:E-mail: jennifer.humphrey@grohe.comE-mail:
800# : (800) 444-7649 800#: (800) 444-7649
Web: www.grohe.comWeb: www.grohe.com
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: 40796001Color/Finish: 001 ChromeSize/Dimensions: 42"W x 3.66"D
Notes: Refer to architectural drawings for location and mounting heights.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-12-BPage 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: 42" Accessible Grab Bar (OPTION C)Item Number: TA-12-C
Item Quantity:
Manufacturer: Gatco, Inc. Source: Gatco, Inc.
Revision(s):
Contact: Michael I. Goffstein
Phone: (800) 227-5640Fax: (510) 895-5676
Address: 1550 Factor AvenueSan Leandro CA 94577 United States of America
Address: 1550 Factor AvenueSan Leandro CA 94577 United States of America
Contact: Michael I. GoffsteinE-mail: michael@gatcoinc.comE-mail: michael@gatcoinc.com
800# : (800) 227-5640
Web: www.gatcoinc.comWeb: www.gatcoinc.com
Phone:Fax: (510) 895-5676
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Latitude Grab Bar/ 858Color/Finish: ChromeSize/Dimensions: 42"W x 3"H (mounting plate) x 1.25"DIA x 2.8"D
Notes: Refer to architectural drawings for location and mounting heights.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-12-CPage 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: 42" Accessible Grab Bar (OPTION D)Item Number: TA-12-D
Item Quantity:
Manufacturer: Bobrick Washroom Equipment Source: Bobrick Washroom Equipment
Revision(s):
Contact: Customer Service
Phone: (818) 764-1000Fax: (818) 765-2700
Address: 11611 Hart St.N. Hollywood CA 91605-
Address: 11611 Hart St.N. Hollywood CA 91605-
Contact: Customer ServiceE-mail: customerservicela@bobrick.comE-mail: customerservicela@bobrick.comWeb: http://www.bobrick.com/Bobrick/Web: http://www.bobrick.com/Bobrick/
Phone: (818) 764-1000Fax: (818) 765-2700
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Grab Bar / B-5806 x 42Color/Finish: Satin StainlessSize/Dimensions: 42"W x 1-1/4"DIA
Notes: Refer to architectural drawings for location and mounting heights.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-12-DPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: 24" Accessible Grab Bar @ Guest
Shower (OPTION A)
Item Number: TA-13-A
Item Quantity:
Manufacturer: WingIt Innovations, LLC Source: WingIt Innovations, LLC
Revision(s):
Contact: Salvatore Sisto
Phone: (732) 869-4466Fax: (732) 869-9474
Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-
Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-
Contact: Salvatore SistoE-mail: sal@wingits.comE-mail: sal@wingits.com
800# : (877) 894-6448 800#: (877) 894-6448
Web: www.wingits.comWeb: www.wingits.com
Phone: (732) 869-4466Fax: (732) 869-9474
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Grab Bar/ WGB5SSKN24Color/Finish: Satin Stainless Steel / PreenedSize/Dimensions: 24"W x 1.25"DIA x 2.75"D
Notes: Refer to architectural drawings for location and mounting heights.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-13-APage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: 24" Accessible Grab Bar @ Guest
Shower (OPTION B)
Item Number: TA-13-B
Item Quantity:
Manufacturer: Moen Inc. Source: Moen Inc.
Revision(s):
Contact: Jason Reynolds
Phone:Fax: (800) 628-0894
Address: 25300 Al Moen DriveNorth Olmsted OH 44070 United States of America
Address: 25300 Al Moen DriveNorth Olmsted OH 44070 United States of America
Contact: Jason ReynoldsE-mail:E-mail:
800# : (800) 289-6636 800#: (800) 289-6636
Web: www.moenpro.comWeb: www.moenpro.com
Mobile: (407) 340-3249Phone: (407) 340-3249Fax: (800) 628-0894
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: R8724PColor/Finish: Stainless Steel / PreenedSize/Dimensions: 24"W x 1.25" DIA x 3"D
Notes: Refer to architectural drawings for location and mounting heights.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-13-BPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: 24" Accessible Grab Bar @ Guest
Shower (OPTION C)
Item Number: TA-13-C
Item Quantity:
Manufacturer: Bobrick Washroom Equipment Source: Bobrick Washroom Equipment
Revision(s):
Contact: Customer Service
Phone: (818) 764-1000Fax: (818) 765-2700
Address: 11611 Hart St.N. Hollywood CA 91605-
Address: 11611 Hart St.N. Hollywood CA 91605-
Contact: Customer ServiceE-mail: customerservicela@bobrick.comE-mail: customerservicela@bobrick.comWeb: http://www.bobrick.com/Bobrick/Web: http://www.bobrick.com/Bobrick/
Phone: (818) 764-1000Fax: (818) 765-2700
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Grab Bar / B-5806.99 x 24Color/Finish: Satin Stainless / PreenedSize/Dimensions: 24"W x 1-1/4"DIA
Notes: Refer to architectural drawings for location and mounting heights.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-13-CPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: 30" Accessible Grab Bar @ Guest
Shower (OPTION A)
Item Number: TA-14-A
Item Quantity:
Manufacturer: WingIt Innovations, LLC Source: WingIt Innovations, LLC
Revision(s):
Contact: Salvatore Sisto
Phone: (732) 869-4466Fax: (732) 869-9474
Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-
Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-
Contact: Salvatore SistoE-mail: sal@wingits.comE-mail: sal@wingits.com
800# : (877) 894-6448 800#: (877) 894-6448
Web: www.wingits.comWeb: www.wingits.com
Phone: (732) 869-4466Fax: (732) 869-9474
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: WGB5SSKN30Color/Finish: Satin Stainless Steel / PreenedSize/Dimensions: 30"W x 1.25"DIA x 2.75"D
Notes: Refer to architectural drawings for location and mounting heights.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-14-APage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: 30" Accessible Grab Bar @ Guest
Shower (OPTION B)
Item Number: TA-14-B
Item Quantity:
Manufacturer: Moen Inc. Source: Moen Inc.
Revision(s):
Contact: Jason Reynolds
Phone:Fax: (800) 628-0894
Address: 25300 Al Moen DriveNorth Olmsted OH 44070 United States of America
Address: 25300 Al Moen DriveNorth Olmsted OH 44070 United States of America
Contact: Jason ReynoldsE-mail:E-mail:
800# : (800) 289-6636 800#: (800) 289-6636
Web: www.moenpro.comWeb: www.moenpro.com
Mobile: (407) 340-3249Phone: (407) 340-3249Fax: (800) 628-0894
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: R8730PColor/Finish: Stainless Steel/ PreenedSize/Dimensions: 30"W x 1.25" DIA x 3"D
Notes: Refer to architectural drawings for location and mounting heights.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-14-BPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: 30" Accessible Grab Bar @ Guest
Shower (OPTION C)
Item Number: TA-14-C
Item Quantity:
Manufacturer: Bobrick Washroom Equipment Source: Bobrick Washroom Equipment
Revision(s):
Contact: Customer Service
Phone: (818) 764-1000Fax: (818) 765-2700
Address: 11611 Hart St.N. Hollywood CA 91605-
Address: 11611 Hart St.N. Hollywood CA 91605-
Contact: Customer ServiceE-mail: customerservicela@bobrick.comE-mail: customerservicela@bobrick.comWeb: http://www.bobrick.com/Bobrick/Web: http://www.bobrick.com/Bobrick/
Phone: (818) 764-1000Fax: (818) 765-2700
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Grab Bar / B-5806.99 x 30Color/Finish: Satin Stainless / PreenedSize/Dimensions: 30"W x 1-1/4"DIA
Notes: Refer to architectural drawings for location and mounting heights.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-14-CPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: 36" Accessible Grab Bar @ Guest
Shower (OPTION A)
Item Number: TA-15-A
Item Quantity:
Manufacturer: WingIt Innovations, LLC Source: WingIt Innovations, LLC
Revision(s):
Contact: Salvatore Sisto
Phone: (732) 869-4466Fax: (732) 869-9474
Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-
Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-
Contact: Salvatore SistoE-mail: sal@wingits.comE-mail: sal@wingits.com
800# : (877) 894-6448 800#: (877) 894-6448
Web: www.wingits.comWeb: www.wingits.com
Phone: (732) 869-4466Fax: (732) 869-9474
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: WGB5SSKN36Color/Finish: Satin Stainless Steel / PreenedSize/Dimensions: 36"W x 1.25"DIA x 2.75"D
Notes: Refer to architectural drawings for location and mounting heights.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-15-APage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: 36" Accessible Grab Bar @ Guest
Shower (OPTION B)
Item Number: TA-15-B
Item Quantity:
Manufacturer: Moen Inc. Source: Moen Inc.
Revision(s):
Contact: Jason Reynolds
Phone:Fax: (800) 628-0894
Address: 25300 Al Moen DriveNorth Olmsted OH 44070 United States of America
Address: 25300 Al Moen DriveNorth Olmsted OH 44070 United States of America
Contact: Jason ReynoldsE-mail:E-mail:
800# : (800) 289-6636 800#: (800) 289-6636
Web: www.moenpro.comWeb: www.moenpro.com
Mobile: (407) 340-3249Phone: (407) 340-3249Fax: (800) 628-0894
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: R8736PColor/Finish: Stainless Steel / PreenedSize/Dimensions: 36"W x 1.25" DIA x 3"D
Notes: Refer to architectural drawings for location and mounting heights.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-15-BPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: 36" Accessible Grab Bar @ Guest
Shower (OPTION C)
Item Number: TA-15-C
Item Quantity:
Manufacturer: Bobrick Washroom Equipment Source: Bobrick Washroom Equipment
Revision(s):
Contact: Customer Service
Phone: (818) 764-1000Fax: (818) 765-2700
Address: 11611 Hart St.N. Hollywood CA 91605-
Address: 11611 Hart St.N. Hollywood CA 91605-
Contact: Customer ServiceE-mail: customerservicela@bobrick.comE-mail: customerservicela@bobrick.comWeb: http://www.bobrick.com/Bobrick/Web: http://www.bobrick.com/Bobrick/
Phone: (818) 764-1000Fax: (818) 765-2700
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Grab Bar / B-5806.99 x 36Color/Finish: Satin Stainless / PreenedSize/Dimensions: 36"W x 1-1/4"DIA
Notes: Refer to architectural drawings for location and mounting heights.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-15-CPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Tub Surround @ Accessible Tubs
(OPTION A)
Item Number: TA-16-A
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Kohler Company
Revision(s):
Contact: Doug Johnston
Phone:Fax:
Address:
Address: 444 Highland DriveKohler WI 53044-
Contact:E-mail: douglas.johnston@kohler.comE-mail:Web: ww.kohler.comWeb:
Mobile: (972) 342-8026Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Choreograph / Brick TextureColor/Finish: T01-0 White / Matte finishSize/Dimensions: See Notes
Notes: Panels to extend from top of tub to ceiling - cut in field as required.Finished edge of side walls to align with front edge of tub.
CONTRACTOR MUST COORDINATE WALL PANEL SIZES WITH TUB OPENING.Refer to architectural drawings for locations.
Provide the following:(2) 36"W x 72"H Brick Texture Wall Panels(1) 60"W x 72"H Brick Texture Wall Panel(2) 96"H corner joints #K-97635-0 / color WHITE
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-16-APage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Tub Surround @ Accessible Tubs
(OPTION B)
Item Number: TA-16-B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Mincey Marble Manufacturing Inc.
Revision(s):
Contact: Donna Mincey
Phone: (678) 997-2770Fax: (770) 531-0935
Address:
Address: 4321 Browns Bridge Rd.Gainesville GA 30504-
Contact:E-mail: dmincey@minceymarble.comE-mail:
800#: (800) 533-1806
Web: www.minceymarble.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: 3" x 6" Subway Vintage Panel System / TS-VN/3x6Color/Finish: 2250 Solid White / Gloss FinishSize/Dimensions: See Notes
Notes: Panels to extend from top of shower pan to ceiling - cut in field as required.Finished edge of side walls to align with front edge of shower pan.
CONTRACTOR MUST COORDINATE WALL PANEL SIZES WITH SHOWER OPENING.Refer to architectural drawings for locations.
Provide the following:(2) 38"W x 80"H 3x6 Subway Panels(1) 60"W x 80"H 3x6 Subway Panel
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-16-BPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Tub Surround @ Accessible Tubs
(OPTION B)
Item Number: TA-16-C
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: MPL Corporation
Revision(s):
Contact: Jennifer Heath
Phone: (317) 835-9000Fax: (317) 835-3050
Address:
Address: 203 N. Edgerton StreetFairland IN 46126-
Contact:E-mail: jheath@mpl-corp.comE-mail:Web: www.mpl-corp.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: 6" x 24" Smooth TileColor/Finish: Bright White/ GlossySize/Dimensions: See Notes
Notes: Panels to extend from top of tub to ceiling - cut infield as required.Finished edge of side walls to align with front edge oftub.
CONTRACTOR MUST COORDINATE WALL PANELSIZES WITH TUB OPENING.Refer to architectural drawings for locations.
CONTRACTOR MUST COORDINATE WALL PANEL SIZES WITH SHOWER OPENING.Refer to architectural drawings for locations.
Provide the following:(2) 34"W x 72"H Brick Texture Wall Panels(1) 60"W x 72"H Brick Texture Wall Panel
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
Tru by Hilton
TA-16-CPage 1
13Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Tub Surround @ Accessible Tubs
(OPTION B)
Item Number: TA-16-C
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: MPL CorporationInstructions:
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-16-CPage 2
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Straight Shower Rod @ Accessible
Roll-in Showers (OPTION A)
Item Number: TA-17-A
Item Quantity:
Manufacturer: WingIt Innovations, LLC Source: WingIt Innovations, LLC
Revision(s):
Contact: Salvatore Sisto
Phone: (732) 869-4466Fax: (732) 869-9474
Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-
Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-
Contact: Salvatore SistoE-mail: sal@wingits.comE-mail: sal@wingits.com
800# : (877) 894-6448 800#: (877) 894-6448
Web: www.wingits.comWeb: www.wingits.com
Phone: (732) 869-4466Fax: (732) 869-9474
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Oval Straight Shower Rod/ WOCBSTSSPColor/Finish: Satin Stainless Steel FinishSize/Dimensions: 58-61" x 1"DIA x 2-3/8"H
Notes: Refer to architectural drawings for location and mounting heights.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-17-APage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Straight Shower Rod @ Accessible
Roll-in Showers (OPTION B)
Item Number: TA-17-B
Item Quantity:
Manufacturer: Moen Inc. Source: Moen Inc.
Revision(s):
Contact: Jason Reynolds
Phone:Fax: (800) 628-0894
Address: 25300 Al Moen DriveNorth Olmsted OH 44070 United States of America
Address: 25300 Al Moen DriveNorth Olmsted OH 44070 United States of America
Contact: Jason ReynoldsE-mail:E-mail:
800# : (800) 289-6636 800#: (800) 289-6636
Web: www.moenpro.comWeb: www.moenpro.com
Mobile: (407) 340-3249Phone: (407) 340-3249Fax: (800) 628-0894
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Donner Commerical Shower Rod/ 52-5Color/Finish: ChromeSize/Dimensions: 62"-62.5"W x 1.75" DIA x 1.75"D
Notes: Refer to architectural drawings for location and mounting heights.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-17-BPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Straight Shower Rod @ Accessible
Roll-in Showers (OPTION C)
Item Number: TA-17-C
Item Quantity:
Manufacturer: Bobrick Washroom Equipment Source: Bobrick Washroom Equipment
Revision(s):
Contact: Customer Service
Phone: (818) 764-1000Fax: (818) 765-2700
Address: 11611 Hart St.N. Hollywood CA 91605-
Address: 11611 Hart St.N. Hollywood CA 91605-
Contact: Customer ServiceE-mail: customerservicela@bobrick.comE-mail: customerservicela@bobrick.comWeb: http://www.bobrick.com/Bobrick/Web: http://www.bobrick.com/Bobrick/
Phone: (818) 764-1000Fax: (818) 765-2700
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Shower Curtain Rod / B-207 x 60Color/Finish: Stainless Steel / Satin FinishSize/Dimensions: 60"W x 1"DIA
Notes: Refer to architectural drawings for location and mounting heights.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-17-CPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Curved Shower Rod @ Accessible Tub
(OPTION A)
Item Number: TA-18-A
Item Quantity:
Manufacturer: WingIt Innovations, LLC Source: WingIt Innovations, LLC
Revision(s):
Contact: Salvatore Sisto
Phone: (732) 869-4466Fax: (732) 869-9474
Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-
Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-
Contact: Salvatore SistoE-mail: sal@wingits.comE-mail: sal@wingits.com
800# : (877) 894-6448 800#: (877) 894-6448
Web: www.wingits.comWeb: www.wingits.com
Phone: (732) 869-4466Fax: (732) 869-9474
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Contour Oval Curved Shower Curtain Rod / W0C0N5Color/Finish: Stainless Steel / Satin FinishSize/Dimensions: 58.5" to 60"W x 1"H x 6"Projection
Notes: Refer to architectural drawings for locations and mounting heights.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-18-APage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Curved Shower Rod @ Accessible Tub
(OPTION B)
Item Number: TA-18-B
Item Quantity:
Manufacturer: Moen Inc. Source: Moen Inc.
Revision(s):
Contact: Jason Reynolds
Phone:Fax: (800) 628-0894
Address: 25300 Al Moen DriveNorth Olmsted OH 44070 United States of America
Address: 25300 Al Moen DriveNorth Olmsted OH 44070 United States of America
Contact: Jason ReynoldsE-mail:E-mail:
800# : (800) 289-6636 800#: (800) 289-6636
Web: www.moenpro.comWeb: www.moenpro.com
Mobile: (407) 340-3249Phone: (407) 340-3249Fax: (800) 628-0894
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Curved Shower Rod/ CSR2165CHColor/Finish: ChromeSize/Dimensions: 59"W x 2.36"H x x 1"DIA x 5.8"Projection
Notes: Refer to architectural drawings for location and mounting heights.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-18-BPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Folding Shower Seat @ Accessible Roll-
in Showers (OPTION A)
Item Number: TA-19-A
Item Quantity:
Manufacturer: WingIt Innovations, LLC Source: WingIt Innovations, LLC
Revision(s):
Contact: Salvatore Sisto
Phone: (732) 869-4466Fax: (732) 869-9474
Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-
Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-
Contact: Salvatore SistoE-mail: sal@wingits.comE-mail: sal@wingits.com
800# : (877) 894-6448 800#: (877) 894-6448
Web: www.wingits.comWeb: www.wingits.com
Phone: (732) 869-4466Fax: (732) 869-9474
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: WSLX320225PWREVColor/Finish: Stainless Steel / Satin Finish / Seat: White PhenolicSize/Dimensions: 32"W x 22-1/2" D x 17"-19" (when folded down)
Notes: Refer to architectural drawings for location and mounting heights.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-19-APage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Folding Shower Seat @ Accessible Roll-
in Showers (OPTION B)
Item Number: TA-19-B
Item Quantity:
Manufacturer: Bobrick Washroom Equipment Source: Bobrick Washroom Equipment
Revision(s):
Contact: Customer Service
Phone: (818) 764-1000Fax: (818) 765-2700
Address: 11611 Hart St.N. Hollywood CA 91605-
Address: 11611 Hart St.N. Hollywood CA 91605-
Contact: Customer ServiceE-mail: customerservicela@bobrick.comE-mail: customerservicela@bobrick.comWeb: http://www.bobrick.com/Bobrick/Web: http://www.bobrick.com/Bobrick/
Phone: (818) 764-1000Fax: (818) 765-2700
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Reversible Folding Shower Seat / B-5181Color/Finish: Stainless Steel / Satin Finish / Seat: Ivory PhenolicSize/Dimensions: 33"W x 22-5/16"D x 14"H (when folded down)
Notes: Refer to architectural drawings for location and mounting heights.
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-19-BPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Removable Seat @ Accessible Tub
(OPTION A)
Item Number: TA-20-A
Item Quantity:
Manufacturer: WingIt Innovations, LLC Source: WingIt Innovations, LLC
Revision(s):
Contact: Salvatore Sisto
Phone: (732) 869-4466Fax: (732) 869-9474
Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-
Address: 714 5th Avenue, P.O. Box 97Bradley Beach NJ 07720-
Contact: Salvatore SistoE-mail: sal@wingits.comE-mail: sal@wingits.com
800# : (877) 894-6448 800#: (877) 894-6448
Web: www.wingits.comWeb: www.wingits.com
Phone: (732) 869-4466Fax: (732) 869-9474
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Portable Tub Bench / WHPTB265150PWColor/Finish: Phenolic WhiteSize/Dimensions: 15"W x 26.5"L x 16-17.5" Adjustable Height
Notes: Refer to architectural drawings for locations.
Seat is 1/2" Phenolic white finish, stainless steel adjustable legs and tub clamp (adjustable 3.5" to 6")
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-20-APage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Baby Changing Station @ Public
Restroom
Item Number: TA-21
Item Quantity:
Manufacturer: Bobrick Washroom Equipment Source: Bobrick Washroom Equipment
Revision(s):
Contact: Customer Service
Phone: (818) 764-1000Fax: (818) 765-2700
Address: 11611 Hart St.N. Hollywood CA 91605-
Address: 11611 Hart St.N. Hollywood CA 91605-
Contact: Customer ServiceE-mail: customerservicela@bobrick.comE-mail: customerservicela@bobrick.comWeb: http://www.bobrick.com/Bobrick/Web: http://www.bobrick.com/Bobrick/
Phone: (818) 764-1000Fax: (818) 765-2700
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: JP
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: *KB110-SSWMColor/Finish: *Satin Stainless Steel Exterior Finish With Molded
Grey Color Polyethylene InteriorSize/Dimensions: *Unit 35 1⁄4" W, 20" H (890 x 510mm). Depth
(closed) 4" (100mm). Extension (open) 15 3⁄16" (385mm)
Instructions:All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Must be of contract quality and suitable for commercial use.•Installation must meet manufacturer's suggested guidelines and/or follow installation guidelins in accordance withArchitect's specification.
•
All materials & methods of construction must comply with all local fire & life safety codes for use in hotels, and Tru by Hilton Standards.
•
All quantities to be verified by hotel operator prior to purchasing.•
Tru by Hilton
TA-21Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Wall Tile @ Breakfast Buffet (OPTION
B)
Item Number: T-T-02B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Daltile- Nancy Burns
Revision(s):
Contact: Nancy Burns
Phone: (404) 661-7111Fax:
Address:
Address: 7834 C.F. Hawn FrwyDallas TX 75217-
Contact:E-mail: nancy.burns@daltile.comE-mail:Web: www.dal-tile.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication:
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Rittenhouse SquareColor/Finish: 0148 Spa/ Semi-GlossSize/Dimensions: 3" x 6"
Coeff Friction: <0.50 Wet <0.80 DryGrout: Mapei; 77 Frost, 1/8"
Notes: Installation Pattern: 50/50 Brick Running Bond
Instructions:Quantities to be verified by installer.•Material must be contract quality and suitable for commercial use.•Grout to include clear matte sealer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Quantities to be verified by installer.•Material must be contract quality and suitable for commercial use.•Grout to include clear matte sealer.•
Tru by Hilton
T-T-02BPage 1
13Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Wall Tile @ Breakfast Buffet (OPTION
B)
Item Number: T-T-02B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Daltile- Nancy BurnsInstructions:
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Tru by Hilton
T-T-02BPage 2
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Vinyl Composition Tile @
Housekeeping, Laundry, and Linen Storage
Item Number: VCT-01
Item Quantity:
Manufacturer: Armstrong Flooring Source: Armstrong Flooring
Revision(s):
Contact: Scott J. Wert, Territory Sales Manager
Phone: (800) 356-9301Fax:
Address: 2500 Columbia Ave.P.O. Box 3001Lancaster PA 17604-3001 United States of America
Address: 2500 Columbia Ave.P.O. Box 3001Lancaster PA 17604-3001 United States of America
Contact: Scott J. Wert, Territory Sales ManagerE-mail: sjwert@armstrongflooring.comE-mail: sjwert@armstrongflooring.com
800# : (513) 571-0817 800#: (513) 571-0817
Web: http://www.armstrong.comWeb: http://www.armstrong.com
Phone: (800) 356-9301Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Standard Excelon Imperial TextureColor/Finish: 51908 PewterSize/Dimensions: 12" x 12" x 1/8"
Notes: Full Spread Adhesives –S-515 High-Moisture, S-525 High-Moisture, S-700 Thin Spread, S-750 Premium
Instructions:Quantities to be verified by installer.•Material must be contract quality and suitable for commercial use.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Tru by Hilton
VCT-01Page 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Light Luxury Vinyl Tile @ Guestroom
(OPTION A)
Item Number: VF-01-A
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Patcraft Commercial Flooring
Revision(s):
Contact: Theresa Schneider
Phone:Fax:
Address:
Address: P.O Box 1527Dalton GA 30722-1527
Contact:E-mail: theresa.schneider@patcraft.comE-mail:
800#: (800) 713-6697
Web: www.patcraft.comWeb:
Mobile: (513) 805-1070Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: JP
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: *Concierge 800Q8Color/Finish: *520 LuminousSize/Dimensions: *9" x 36" Plank Tile / 5mm thickness
Notes: *40 mil Wear Layer
Install with acoustical underlayment:Product Name: Patcraft GroundWorksProduct No: S122VRoll Size: 100 SF 36"W x 33'-4"LThickness: 1.4 mm
Use Shaw 4100 adhesive to adhere Groundworks to the subfloor.
Refer to plan-o-gram provided by manufacturer. Install according to manufacturer instructions.
Location of ALL luxury vinyl tiles tiles should be coordinated with the CORRECT casegood laminate package.
Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Tru by Hilton
VF-01-APage 1
13Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Light Luxury Vinyl Tile @ Guestroom
(OPTION A)
Item Number: VF-01-A
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Patcraft Commercial FlooringInstructions:
Quantities must be verified by installer.•
Tru by Hilton
VF-01-APage 2
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Light Luxury Vinyl Tile @ Guestroom
(OPTION B)
Item Number: VF-01-B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Mohawk Industries, Inc.
Revision(s):
Contact: Karin Hockman
Phone: (410) 233-3891Fax:
Address:
Address: 160 South Industrial Blvd.Calhoun GA 30701-
Contact:E-mail: karin_hockman@mohawkind.comE-mail:
800#: (800) 241-4494
Web: www.mohawkind.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: *TRU-L1Color/Finish: 936 Converse BasinSize/Dimensions: 6" x 36" / 5mm thickness
Notes: 20 mil Wear Layer
Install with acoustic underlayment:Style Name: Mohawk Prime SoundThickness: 1.5 mmRecommend perimeter glue MS160 or M700
Glue underlayment to subfloor with MS160 spray adhesive.
Refer to plan-o-gram provided by manufacturer. Install according to manufacturer instructions.
Location of ALL luxury vinyl tiles tiles should be coordinated with the CORRECT casegood laminate package.
Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Tru by Hilton
VF-01-BPage 1
13Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Light Luxury Vinyl Tile @ Guestroom
(OPTION B)
Item Number: VF-01-B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Mohawk Industries, Inc.Instructions:
Quantities must be verified by installer.•
Tru by Hilton
VF-01-BPage 2
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Light Luxury Vinyl Tile @ Guestroom
(OPTION C)
Item Number: VF-01-C
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Shaw Industries
Revision(s):
Contact: Nancy Dickinson
Phone: (513) 673-3600Fax:
Address:
Address: 185 South Industrial Blvd.Calhoun GA 30701-
Contact:E-mail: nancy@dickinsoncontract.comE-mail:Web: www.shawcontractgroup.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Solitude 0648VColor/Finish: 48120 Cottonwood / ExoGuard Quartz Enhanced
UrethaneSize/Dimensions: 6" x 48" / 5mm thickness
Notes: 20 mil Wear Layer
Install with acoustic underlayment:Style Name: Shaw Industries GroundworksStyle Number: #08VSRoll Size: 100 SF 36"W x 33'-4"LThickness: 1.4 mm
Use Shaw 4100 adhesive to adhere Groundworks to the subfloor.
Refer to plan-o-gram provided by manufacturer. Install according to manufacturer instructions.
Location of ALL luxury vinyl tiles tiles should be coordinated with the CORRECT casegood laminate package.
Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Tru by Hilton
VF-01-CPage 1
13Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Light Luxury Vinyl Tile @ Guestroom
(OPTION C)
Item Number: VF-01-C
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Shaw IndustriesInstructions:
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Quantities must be verified by installer.•
Tru by Hilton
VF-01-CPage 2
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Dark Luxury Vinyl Tile @ Guestroom
(OPTION A)
Item Number: VF-02-A
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Patcraft Commercial Flooring
Revision(s):
Contact: Theresa Schneider
Phone:Fax:
Address:
Address: P.O Box 1527Dalton GA 30722-1527
Contact:E-mail: theresa.schneider@patcraft.comE-mail:
800#: (800) 713-6697
Web: www.patcraft.comWeb:
Mobile: (513) 805-1070Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: JP
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: *Concierge 800Q8Color/Finish: *580 Black OutSize/Dimensions: *9" x 36" Plank Tile / 5mm thickness
Notes: *40 mil wear layer.
Install with acoustical underlayment:Product Name: Patcraft GroundWorksProduct No: S122VRoll Size: 100 SF 36"W x 33'-4"LThickness: 1.4 mm
Use Shaw 4100 adhesive to adhere Groundworks to the subfloor.
Refer to plan-o-gram provided by manufacturer. Install according to manufacturers instructions.
Location of ALL luxury vinyl tiles tiles should be coordinated with the CORRECT casegood laminate package.
Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Tru by Hilton
VF-02-APage 1
13Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Dark Luxury Vinyl Tile @ Guestroom
(OPTION A)
Item Number: VF-02-A
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Patcraft Commercial FlooringInstructions:
Quantities must be verified by installer.•
Tru by Hilton
VF-02-APage 2
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Dark Luxury Vinyl Tile @ Guestroom
(OPTION B)
Item Number: VF-02-B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Mohawk Industries, Inc.
Revision(s):
Contact: Karin Hockman
Phone: (410) 233-3891Fax:
Address:
Address: 160 South Industrial Blvd.Calhoun GA 30701-
Contact:E-mail: karin_hockman@mohawkind.comE-mail:
800#: (800) 241-4494
Web: www.mohawkind.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: *TRU-L2Color/Finish: 872 Picton ParkSize/Dimensions: 6" x 36" / 5mm thickness
Notes: 20 mil Wear Layer
Install with acoustic underlayment:Style Name: Mohawk Prime SoundThickness: 1.5 mmRecommend perimeter glue MS160 or M700
Glue underlayment to subfloor with MS160 spray adhesive.
Refer to plan-o-gram provided by manufacturer. Install according to manufacturer instructions.
Location of ALL luxury vinyl tiles tiles should be coordinated with the CORRECT casegood laminate package.
Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Tru by Hilton
VF-02-BPage 1
13Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Dark Luxury Vinyl Tile @ Guestroom
(OPTION B)
Item Number: VF-02-B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Mohawk Industries, Inc.Instructions:
Quantities must be verified by installer.•
Tru by Hilton
VF-02-BPage 2
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Dark Luxury Vinyl Tile @ Guestroom
(OPTION C)
Item Number: VF-02-C
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Shaw Industries
Revision(s):
Contact: Nancy Dickinson
Phone: (513) 673-3600Fax:
Address:
Address: 185 South Industrial Blvd.Calhoun GA 30701-
Contact:E-mail: nancy@dickinsoncontract.comE-mail:Web: www.shawcontractgroup.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Solitude 06486VColor/Finish: 48549 Char / ExoGuard Quartz Enhanced UrethaneSize/Dimensions: 6" x 48" / 5mm thickness
Notes: 20 mil Wear Layer
Install with acoustic underlayment:Style Name: Shaw Industries GroundworksStyle Number: #08VSRoll Size: 100 SF 36"W x 33'-4"LThickness: 1.4 mm
Use Shaw 4100 adhesive to adhere Groundworks to the subfloor.
Refer to plan-o-gram provided by manufacturer. Install according to manufacturer instructions.
Location of ALL luxury vinyl tiles tiles should be coordinated with the CORRECT casegood laminate package.
Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Tru by Hilton
VF-02-CPage 1
13Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Dark Luxury Vinyl Tile @ Guestroom
(OPTION C)
Item Number: VF-02-C
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Shaw IndustriesInstructions:
Quantities must be verified by installer.•
Tru by Hilton
VF-02-CPage 2
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Light Luxury Vinyl Tile @ Lobby
(OPTION A)
Item Number: VF-03-A
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Patcraft Commercial Flooring
Revision(s):
Contact: Theresa Schneider
Phone:Fax:
Address:
Address: P.O Box 1527Dalton GA 30722-1527
Contact:E-mail: theresa.schneider@patcraft.comE-mail:
800#: (800) 713-6697
Web: www.patcraft.comWeb:
Mobile: (513) 805-1070Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: JP
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: *Concierge 800Q8Color/Finish: *520 LuminousSize/Dimensions: *9" x 36" Plank Tile / 5mm thickness
Notes: *40 mil wear layer.
Install with acoustical underlayment:Product Name: Patcraft GroundWorksProduct No: S122VRoll Size: 100 SF 36"W x 33'-4"LThickness: 1.4 mm
Use Shaw 4100 adhesive to adhere Groundworks to the subfloor.
Refer to plan-o-gram provided by manufacturer. Install according to manufacturer instructions.
Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Quantities must be verified by installer.•
Tru by Hilton
VF-03-APage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Light Luxury Vinyl Tile @ Lobby
(OPTION B)
Item Number: VF-03-B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Mohawk Industries, Inc.
Revision(s):
Contact: Karin Hockman
Phone: (410) 233-3891Fax:
Address:
Address: 160 South Industrial Blvd.Calhoun GA 30701-
Contact:E-mail: karin_hockman@mohawkind.comE-mail:
800#: (800) 241-4494
Web: www.mohawkind.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: *TRU-L1Color/Finish: 936 Converse BasinSize/Dimensions: 6" x 36" / 5mm thickness
Notes: 20 mil Wear Layer
Install with acoustic underlayment:Style Name: Mohawk Prime SoundThickness: 1.5 mmRecommend perimeter glue MS160 or M700
Glue underlayment to subfloor with MS160 spray adhesive.
Refer to plan-o-gram provided by manufacturer. Install according to manufacturer instructions.
Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Quantities must be verified by installer.•
Tru by Hilton
VF-03-BPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Light Luxury Vinyl Tile @ Lobby
(OPTION C)
Item Number: VF-03-C
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Shaw Industries
Revision(s):
Contact: Nancy Dickinson
Phone: (513) 673-3600Fax:
Address:
Address: 185 South Industrial Blvd.Calhoun GA 30701-
Contact:E-mail: nancy@dickinsoncontract.comE-mail:Web: www.shawcontractgroup.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Solitude 0648VColor/Finish: 48120 Cottonwood / ExoGuard Quartz Enhanced
UrethaneSize/Dimensions: 6" x 48" / 5mm thickness
Notes: 20 mil Wear Layer
Install with acoustic underlayment:Style Name: Shaw Industries GroundworksStyle Number: #08VSRoll Size: 100 SF 36"W x 33'-4"LThickness: 1.4 mm
Use Shaw 4100 adhesive to adhere Groundworks to the subfloor.
Refer to plan-o-gram provided by manufacturer. Install according to manufacturer instructions.
Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Quantities must be verified by installer.•
Tru by Hilton
VF-03-CPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Medium Luxury Vinyl Tile @ Lobby
(OPTION A)
Item Number: VF-04-A
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Patcraft Commercial Flooring
Revision(s):
Contact: Theresa Schneider
Phone:Fax:
Address:
Address: P.O Box 1527Dalton GA 30722-1527
Contact:E-mail: theresa.schneider@patcraft.comE-mail:
800#: (800) 713-6697
Web: www.patcraft.comWeb:
Mobile: (513) 805-1070Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: *Concierge 800Q8Color/Finish: *560 OvercastSize/Dimensions: *9" x 36" Plank Tile / 5mm thickness
Notes: *40 mil wear layer.
Install with acoustical underlayment:Product Name: Patcraft GroundWorksProduct No: S122VRoll Size: 100 SF 36"W x 33'-4"LThickness: 1.4 mm
Use Shaw 4100 adhesive to adhere Groundworks to the subfloor.
Refer to plan-o-gram provided by manufacturer. Install according to manufacturer instructions.
Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Quantities must be verified by installer.•
Tru by Hilton
VF-04-APage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Medium Luxury Vinyl Tile @ Lobby
(OPTION B)
Item Number: VF-04-B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Mohawk Industries, Inc.
Revision(s):
Contact: Karin Hockman
Phone: (410) 233-3891Fax:
Address:
Address: 160 South Industrial Blvd.Calhoun GA 30701-
Contact:E-mail: karin_hockman@mohawkind.comE-mail:
800#: (800) 241-4494
Web: www.mohawkind.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: *TRU-L3Color/Finish: 148 Atwell MillSize/Dimensions: 6" x 36" / 5mm thickness
Notes: 20 mil Wear Layer
Install with acoustic underlayment:Style Name: Mohawk Prime SoundThickness: 1.5 mmRecommend perimeter glue MS160 or M700
Glue underlayment to subfloor with MS160 spray adhesive.
Refer to plan-o-gram provided by manufacturer. Install according to manufacturer instructions.
Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Quantities must be verified by installer.•
Tru by Hilton
VF-04-BPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Medium Luxury Vinyl Tile @ Lobby
(OPTION C)
Item Number: VF-04-C
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Shaw Industries
Revision(s):
Contact: Nancy Dickinson
Phone: (513) 673-3600Fax:
Address:
Address: 185 South Industrial Blvd.Calhoun GA 30701-
Contact:E-mail: nancy@dickinsoncontract.comE-mail:Web: www.shawcontractgroup.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Solitude 0648VColor/Finish: 48599 French Gray / ExoGuard Quartz Enhanced
UrethaneSize/Dimensions: 6" x 48" / 5mm thickness
Notes: 20 mil Wear Layer
Install with acoustic underlayment:Style Name: Shaw Industries GroundworksStyle Number: #08VSRoll Size: 100 SF 36"W x 33'-4"LThickness: 1.4 mm
Use Shaw 4100 adhesive to adhere Groundworks to the subfloor.
Refer to plan-o-gram provided by manufacturer. Install according to manufacturer instructions.
Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Quantities must be verified by installer.•
Tru by Hilton
VF-04-CPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Dark Luxury Vinyl Tile @ Lobby
(OPTION A)
Item Number: VF-05-A
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Patcraft Commercial Flooring
Revision(s):
Contact: Theresa Schneider
Phone:Fax:
Address:
Address: P.O Box 1527Dalton GA 30722-1527
Contact:E-mail: theresa.schneider@patcraft.comE-mail:
800#: (800) 713-6697
Web: www.patcraft.comWeb:
Mobile: (513) 805-1070Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: *Concierge 800Q8Color/Finish: *580 Black OutSize/Dimensions: *9" x 36" Plank Tile / 5mm thickness
Notes: *40 mil wear layer.
Install with acoustical underlayment:Product Name: Patcraft GroundWorksProduct No: S122VRoll Size: 100 SF 36"W x 33'-4"LThickness: 1.4 mm
Use Shaw 4100 adhesive to adhere Groundworks to the subfloor.
Refer to plan-o-gram provided by manufacturer. Install according to manufacturers instructions.
Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Quantities must be verified by installer.•
Tru by Hilton
VF-05-APage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Dark Luxury Viny Tile @ Lobby
(OPTION B)
Item Number: VF-05-B
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Mohawk Industries, Inc.
Revision(s):
Contact: Karin Hockman
Phone: (410) 233-3891Fax:
Address:
Address: 160 South Industrial Blvd.Calhoun GA 30701-
Contact:E-mail: karin_hockman@mohawkind.comE-mail:
800#: (800) 241-4494
Web: www.mohawkind.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: *TRU-L2Color/Finish: 872 Picton ParkSize/Dimensions: 6" x 36" / 5mm thickness
Notes: 20 mil Wear Layer
Install with acoustic underlayment:Style Name: Mohawk Prime SoundThickness: 1.5 mmRecommend perimeter glue MS160 or M700
Glue underlayment to subfloor with MS160 spray adhesive.
Refer to plan-o-gram provided by manufacturer. Install according to manufacturer instructions.
Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Quantities must be verified by installer.•
Tru by Hilton
VF-05-BPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Dark Luxury Viny Tile @ Lobby
(OPTION C)
Item Number: VF-05-C
Item Quantity:
Manufacturer: REQUIRED VENDOR Source: Shaw Industries
Revision(s):
Contact: Nancy Dickinson
Phone: (513) 673-3600Fax:
Address:
Address: 185 South Industrial Blvd.Calhoun GA 30701-
Contact:E-mail: nancy@dickinsoncontract.comE-mail:Web: www.shawcontractgroup.comWeb:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: Solitude 0648VColor/Finish: 48549 Char / ExoGuard Quartz Enhanced UrethaneSize/Dimensions: 6" x 48" / 5mm thickness
Notes: 20 mil Wear Layer
Install with acoustic underlayment:Style Name: Shaw Industries GroundworksStyle Number: #08VSRoll Size: 100 SF 36"W x 33'-4"LThickness: 1.4 mm
Use Shaw 4100 adhesive to adhere Groundworks to the subfloor.
Refer to plan-o-gram provided by manufacturer. Install according to manufacturer instructions.
Instructions:Must be of contract quality and suitable for commercial use.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Quantities must be verified by installer.•
Tru by Hilton
VF-05-CPage 1
11Project #: Tru by Hilton
Issue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Wood Finish @ Lobby Trellis Post and
Beams
Item Number: WD-01
Item Quantity:
Manufacturer: To Bid Source: To Bid
Revision(s):
Contact:
Phone:Fax:
Address:
Address:
Contact:E-mail:E-mail:Web:Web:
Phone:Fax:
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: AMC
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: 6"x6" Pine Timber, Grade No.1 or betterColor/Finish: Stained to match Minwax Weathered Oak 270Size/Dimensions: Refer to notes
Notes: 6"x6" timber planed to 5-1/4"x 5-1/4" with eased corners - refer to architectural drawings for details and dimensions.
Less than 8% MC (Moisture Content)
Instructions:Must be of contract quality and suitable for commercial use.•Provide clear alcohol, water, and burn resistant penetrating sealer.•All wood to be kiln dried and treated to be insect and vermin free.•Quantities to be verified by installer.•All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
Tru by Hilton
WD-01Page 1
11Project #: Tru by HiltonIssue Date: 11/22/16
Project Name: V1.3 Prototypical Architectural SpecsItem Description: Polyester Webbing @ Media WallItem Number: WEB-01
Item Quantity:
Manufacturer: Strapworks Source: Strapworks
Revision(s):
Contact:
Phone: (541) 741-0658Fax: (541) 741-7625
Address: 3900 W 1st Ave.Eugene OR 97402-
Address: 3900 W 1st Ave.Eugene OR 97402-
Contact:E-mail: custom@strapworks.comE-mail: custom@strapworks.comWeb: www.strapworks.comWeb: www.strapworks.com
Phone: (541) 741-0658Fax: (541) 741-7625
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: RL
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Product: *Polyester Seat Belt WebbingColor/Finish: *Red / ColorfastSize/Dimensions: *2" Wide
Notes: *Webbing must be moisture resistant, UV resistant, Colorfast, and have high breaking strength and abrasion resistance.
Instructions:Must be of contract quality and suitable for commerical use.•Installer to follow all manufacturer's installation guidelines for surface preparation and installation.•Quantities to be verified by installer.•All interpretations of these specifications MUST be submitted to Hilton for final approval prior to purchasing or implementation of any material.
•
All materials and methods of construction must comply with all local fire and life safety codes for use in hotels and other public spaces, and Tru by Hilton Standards.
•
Tru by Hilton
WEB-01Page 1
top related