arch-01 technician draw technician modeling tools in cinema 4d · arch-01 arch-01 technician draw...
Post on 04-Jun-2018
223 Views
Preview:
TRANSCRIPT
ARCH-01
ARCH-01 TECHNICIAN DRAW AND TECHNICIAN MODELING TOOLS IN CINEMA 4D
Arch-01 is a modeling toolset that allows the user to draw geometry inside Cinema 4D with classic CADlike precision and workfoww With Arch-01 you can:
Drawing ToolsDraw Linear Spline as CAD like precisionDraw Arc Spline as CAD like precisionDraw Circular Spline as CAD like precisionDraw Rectangle Spline as CAD like precision
Position ToolsMove an object with snap from point to point as classic CAD like precisionPlace an object or object copy on polygons normalReplace objects with Instance
Modeling ToolsMake a Polygon from SplineCut a Polygon with SplineCut selecton PolygonsCopy selecton PolygonsPaste selecton PolygonsClone selecton Polygons
Measurement ToolsGet Distance between 2 points in real Time Get Length Spline in Real TimeGet Area from Selecton Polygons in Real TimeAdd Parametric Objects for quote (distance, altmetric, angular) in real Time
Arch-01 v5w50 developed by Salvatore Maesano / Caleidos4D http://wwwwcaleidos4dwit 1
ARCH-01
General Overview: Arch-01 contains 6 Main Tools + 7 Minor Tools + Arch-01 Manager:Main Tools1 – Draw Line/Arc for technician Splines or N-gon polygons2 – Draw Circle for circulars Splines of various radius 3 – Draw Square for rectangular/squares Splines of various measures4 – Precision Mover for move an object with snap point to point5 – Surface Aligner for place objects (or copy) on polygons Normal Surface)6 – Object Dimension (+ Placer) for quote (distance, altmetric, angular)
Minor Tools7 – Make Polygons for make a Polygon from Spline8 – Excalibur for Cut a Polygon with Spline9 – Cut Polygons for Cut selecton Polygons10 – Copy Polygons for Copy selecton Polygons11 – Paste Polygons for Paste selecton Polygons12 – Clone Polygons for Clone selecton Polygons13 – InfoBOX for get Area or Distance in real Time
(Figure A)
Each Tool is controlled for common setng by Arch-01 ManagerArch-01 v5.50
(Figure B)
Arch-01 v5w50 developed by Salvatore Maesano / Caleidos4D http://wwwwcaleidos4dwit 2
ARCH-01
INDICE GENERALE
Installaton and First Runwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww5
Arch-01 MANAGERwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww6
Drawing Tools Overviewwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww8
WorkPlaneswwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww8
Snapwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww9
Draw Line/Arcwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww10
Coordinate Systemwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww10
Coordinate Typewwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww11
Usagewwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww12
Quantiatonwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww12
Lock Quantiatonwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww12
Offset Modewwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww13
Fast Inputwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww14
Dynamic Guidewwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww15
Ortho (Key H)wwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww16
Parallel (Key J)wwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww17
Color Optons and Layerwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww18
Arc Modewwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww18
Draw Line/Arc Reminder Shortcutswwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww19
Draw Circlewwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww20
Usagewwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww20
Draw Circle Reminder Shortcutswwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww20
Draw Squarewwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww21
Usagewwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww21
Draw Square Reminder Shortcutswwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww21
Precision Moverwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww22
Arch-01 v5w50 developed by Salvatore Maesano / Caleidos4D http://wwwwcaleidos4dwit 3
ARCH-01
Usage:wwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww22
Precision Mover Reminder Shortcutswwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww22
Surface Allignerwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww23
Usagewwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww23
Surface Alligner Reminder Shortcutswwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww23
Optonswwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww24
Object Dimensionwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww25
Usagewwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww25
Specifcatonswwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww26
Copy and Apply Property and Content + Manager Presetwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww27
Infoboxwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww28
Modeling Toolswwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww29
Excaliburwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww29
Make Polygonwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww30
Cut Polygons, Copy Polygons, Paste Polygons, Clone Polygonswwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww31
Replace Objectswwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww32
Step Command Shortcutwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww33
License to usewwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww34
Arch-01 v5w50 developed by Salvatore Maesano / Caleidos4D http://wwwwcaleidos4dwit 4
ARCH-01
INSTALLATION AND FIRST RUN
Installation:Place Arch-01 folder, in Cinema 4D plugin directorywStart Cinema 4D and call Arch-01 manager from Cinema 4D plugin menu,
On First Run, select Initaliie Arch-01 Plugin from Help menu
(Figure 1)
Arch-01 v5w50 developed by Salvatore Maesano / Caleidos4D http://wwwwcaleidos4dwit 5
ARCH-01
ARCH-01 MANAGER
The manager is the core of the toolsw It recogniies the actve tool and will bring up the appropriate menu of optonsYou can dock or undock the Arch-01 manager in your Cinema 4D workspacewBut it is recommended to dock the window for a better user experience
(Figure 2)
In Arch-01 v5w50 is possible to change in Vertcal Gui mode, by Manage>Preferences and fag Vertcal Guiw
(Figure 2 Bis)
Arch-01 v5w50 developed by Salvatore Maesano / Caleidos4D http://wwwwcaleidos4dwit 6
ARCH-01
Arch-01 Manager Vertcal Gui dock in Cinema 4D workspace (Figure 2 Ter)
(Figure 2 Quater)
Arch-01 v5w50 developed by Salvatore Maesano / Caleidos4D http://wwwwcaleidos4dwit 7
ARCH-01
DRAWING TOOLS OVERVIEW
WORKPLANESThe Arch-01 Draw Tools analyies the scene and use the workplane in use, You can choose the workplanewith the Cinema 4D natve tools or use Shift+Left Click to choose a new workplanew
Shift+Left Click works on all objects that generate faces (example: Primitve , Booleans hierarchies, etcw)w
(Figure 3)
(Figure 3 bis)
Arch-01 v5w50 developed by Salvatore Maesano / Caleidos4D http://wwwwcaleidos4dwit 8
ARCH-01
SNAPArch-01 Draw Tools use an internal snap points system, indipendent of Cinema 4D natve SnapwWhen the mouse is over an object points, a green circle will appear for to indicate the snap point
(Figure 4)
(Figure 5)
You can change at any tme the sensitvity of the snap, with the command Snap Radius
(Figure 6)
Arch-01 v5w50 developed by Salvatore Maesano / Caleidos4D http://wwwwcaleidos4dwit 9
ARCH-01
DRAW LINE/ARC
COORDINATE SYSTEMAn important component of the design assisted in Arch-01 is the element Pivotw Pivot Appear as 3 axesobject, and it determines the type of Coordinates Systemsw
Line/Arc tool, work in 2 different Coordinate Systems:
Delta Coordinate System - The next point is measured relatve to the last spline point created (PivotPositon at: last point) Similar to the Cinema 4D'ss Object coordinate systemw (Figure 7)
World Coordinate System - The next point is measured relatve to Cinema 4D'ss world origin point (Pivotpositon at: 0,0,0) Similar to the Cinema 4D'ss World coordinate systemw (Figure 8)
You can Switch to Delta/World at any tme, using Dropdown optons in Arch-01 Manager
Delta Coordinate System (Figure 7)
World Coordinate System (Figure 8)
Arch-01 v5w50 developed by Salvatore Maesano / Caleidos4D http://wwwwcaleidos4dwit 10
ARCH-01
COORDINATE TYPELine/Arc tool, work in 2 different Coordinate Types:
Cartesian Coordinates:
Cartesian Coordiantes are coordinates defned by values in 3 orthogonal planes: X, Y and Zw Similar toCinema 4D'ss standard coordinate systemw (Figure 9)
Cartesian Coordinates (Figure 9)
Polar Coordinates: Polar coordinates are defned by rotatonal positons around a center pointw (Figure 10)
L (Length) - the length line segment
A (Angle) - the angle of the line along the Drawing Plane (is measured from the blue Z-axis)ww
E (Elevaton) - Distance from the draw plane in the normal directonw
Polar Coordinates (Figure 10)
You can Switch to Cartesian/Polar at any tme, using Dropdown optons in Arch-01 Manager
Arch-01 v5w50 developed by Salvatore Maesano / Caleidos4D http://wwwwcaleidos4dwit 11
ARCH-01
USAGE1) Select Draw Line/Arc tool;3) Select Coordinate System and Coordinate Mode;2) Click on plane;
QUANTIZATIONAfter Selectng Coordinate System and Coordinate Mode, you can quantie the Coordinate, by Arch-01 Managerw Enter values in the input felds and hit ENTER
(Figure 11)
LOCK QUANTIZATIONIn Figure11 is shown, for example, how to obtain a segment of the spline, length 100w After clicking, the new spline segment will be created and the Arch-01 Manger input feld, will return to 0 (Zero)w
If you Select the Checkbox , the measure will be Lock and will return Not to 0 (Zero)
(Figure 12)
(Figure 12 bis)
Arch-01 v5w50 developed by Salvatore Maesano / Caleidos4D http://wwwwcaleidos4dwit 12
ARCH-01
OFFSET MODEIn Cartesian Mode, positon the mouse over a point (you can Lock the measure) a cyan line will appear and the Offset Mode will be actvew
In (Figure 13) is shown, for example, how to obtain a spline, with points positon at Offset Y = +100
(Figure 13)
Arch-01 v5w50 developed by Salvatore Maesano / Caleidos4D http://wwwwcaleidos4dwit 13
ARCH-01
FAST INPUTWhen Fast Input is enabled the input value HUD appear, and you can enter coordinate, directly from thekeyboard number (no need to press Enter)wA little circle, will indicate the actve coordinate (Figure 14))w
You Can use these keyboard shortcut for coordinate entry:
Keyboard Shortcuts if Fast Input is Active
Polar Coordinate System Cartesian Coordinate System
L Length coordinate entry X X coordinate entry
A Angular coordinate entry Y Y coordinate entry
E Elevaton coordinate entry Z Z coordinate entry
TAB cycle through L, A, E, entry TAB cycle through X, Y, Z, entry
Ctrl+L Get Length dimension and Lock value
Canc For Clear all value Canc For Clear input value
Backspace For Clear last number in value Backspace For Clear last number in value
If Fast Input is Actve, it is has priority over the Arch-01 Manager felds coordinatewArch-01 Manager felds coordinate and lock quantization, will not work if Fast Input is Activew
(Figure 14)
Arch-01 v5w50 developed by Salvatore Maesano / Caleidos4D http://wwwwcaleidos4dwit 14
ARCH-01
DYNAMIC GUIDEDynamic Guides advantage during drawing operatonswOnce actvated, they will appear to force the positon of the point on the straight line X (Figure 15) and line Z (Figure 16) or 45 ° (Figures 17), to the reference of the workplane in usew
It is possible to vary the sensitvity of the guides, by means of the siie of radius snap
(Figure 15)
(Figure 16)
(Figure 17)
Arch-01 v5w50 developed by Salvatore Maesano / Caleidos4D http://wwwwcaleidos4dwit 15
ARCH-01
ORTHO (KEY H)Place your mouse on a point and press H (NO Left Click) It will see a White BallwA yellow line will guide the positoning of point coordinates X (Figure 18) or Z (Figure 19)
Press H again to cancel selecton
(Figure 18)
(Figure 19)
Arch-01 v5w50 developed by Salvatore Maesano / Caleidos4D http://wwwwcaleidos4dwit 16
ARCH-01
PARALLEL (KEY J)Place your mouse on a point and press J (NO Left Click) It will see a Red BallwRepeat this process on a second pointwThere will be two red balls, the line will have the same angle of the line through the two red dots
Press J again to cancel selecton
(Figure 20)
(Figure 21)
Arch-01 v5w50 developed by Salvatore Maesano / Caleidos4D http://wwwwcaleidos4dwit 17
ARCH-01
COLOR OPTIONS AND LAYERYou can choose the color to give the splinew There are 3 optons:
- Default Color = Keep unchanged the propertes of the spline- Color = Assign your favorite color- By Layer = Assign color by Layer
(Figure 22)
ARC MODEUse the Q (Quick Change) to switch between Line to Arc modew The HUD will indicate the selected modeUse the I (Inversion Arc) to reverse the directon
Keyboard Shortcuts
Q Quick Change Switch Line/Arc
I Inversion Arc In Arc Mode, Invert Arc
(Figure 23)
Arch-01 v5w50 developed by Salvatore Maesano / Caleidos4D http://wwwwcaleidos4dwit 18
ARCH-01
DRAW LINE/ARC REMINDER SHORTCUTS
(Figure 24)
Arch-01 v5w50 developed by Salvatore Maesano / Caleidos4D http://wwwwcaleidos4dwit 19
ARCH-01
DRAW CIRCLE
USAGE1) Select Draw Circle Tool ( Use key “+” or “-” for segments Circle assign);2) Click frst point (center of circle);3) Click second point (radius circle);When Draw Circle Tool is Actve, Arch-01 Manager, will show opton enabled for this tool
(Figure 25)
DRAW CIRCLE REMINDER SHORTCUTS
(Figure 25 bis)
Arch-01 v5w50 developed by Salvatore Maesano / Caleidos4D http://wwwwcaleidos4dwit 20
ARCH-01
DRAW SQUARE
USAGE1) Select Draw Square Tool;2) Click frst point;3) Click second point;When Draw Square Tool is Actve, Arch-01 Manager, will show opton enabled for this tool;
(Figure 26)
DRAW SQUARE REMINDER SHORTCUTS
(Figure 26 bis)
Arch-01 v5w50 developed by Salvatore Maesano / Caleidos4D http://wwwwcaleidos4dwit 21
ARCH-01
PRECISION MOVER
With Precision Mover you can move an object by point to point snap, as classic CAD like precisionwPrecision Mover Work on: Polygons, Splines, Primitves, Primitves Splines, and Generators
(Subdivision, Surface, Lathe, Sweep, Extrude, Loft, Beiier)
USAGE:1) Select an object to move;2) Call Precision Mover Tool and over mouse on object pointswA green circle will appear for to indicate the snap point;3) Left Clickw An Orange Circle will appear for to indicate the start point;4) Over Mouse on destnaton point and Left Clickw The Object will be move;
(Figure 27)
When Orange Circle is show, You can:
Keyboard Shortcuts
Ctrl + Left Click Copy object
Shift + Left Click Select a new object to move
PRECISION MOVER REMINDER SHORTCUTS
(Figure 28)
Arch-01 v5w50 developed by Salvatore Maesano / Caleidos4D http://wwwwcaleidos4dwit 22
ARCH-01
SURFACE ALLIGNER
With Surface Alligner you can place an object or copy objects on the surfaces (Normals)This tool is extremely useful in the management of the scenes
USAGE1) Select an Object;2) Select the Allign Object Mode from Arch-01 Manager (+Y, -Y, +Z,-Z);3) Left Click on the object to be allocatedw The Object actve will be placed (Figure 29);
(Figure 29)
When an Object is Select, You can:
Keyboard Shortcuts
Ctrl + Left Click Copy object (Instance)
Shift + Left Click Select a new object
SURFACE ALLIGNER REMINDER SHORTCUTS
(Figure 30)
Arch-01 v5w50 developed by Salvatore Maesano / Caleidos4D http://wwwwcaleidos4dwit 23
ARCH-01
OPTIONS
You can choose Random Rotation and Random Scale, for placer Instance with different Rotaton and Scale
(Figure 31)
(Figure 32)
Arch-01 v5w50 developed by Salvatore Maesano / Caleidos4D http://wwwwcaleidos4dwit 24
ARCH-01
OBJECT DIMENSION
With Object Dimension, you can measure:Distance (by selecton 2 Points or 1 Edge)Elevation (by selecton 1 Point)Angle (by selecton 3 Points or 1 Edge)
Object Dimension work with Spline ad Polygon and recogniie the measure for an object onlywObject Dimension does NOT return the measurements between two objectsw
(Figure 33)
USAGE1) Select Edges or Points and Left Click on Command Dimension Placer (Figure 33)w
The Object Dimension will be createdw
For Distance, You can adjust the Object Dimension rotaton, by a second left clickFor Elevation, You can adjust the Object Dimension mode (Right, Left or Right+Left) by a second left clickFor Angle, You can adjust the Object Dimension origin, by a second left click
(Figure 34)
Arch-01 v5w50 developed by Salvatore Maesano / Caleidos4D http://wwwwcaleidos4dwit 25
b
ARCH-01
For Object Dimension, Arch-01 Manager incorporates shortcuts and additonal commands:
(Figure 35)
a: A frst click for make a Object Dimensionw A second click for adjust, when an Object Dimension is selected;b: click for Reverse Text;c: click for Rotaton Text;d: click for Enable (show) all Object Dimension;e: click for Disable (hide) all Object Dimension;f: click for Purge (delete all Object Dimension unnecessary);g: click for Delete all Object Dimension;
SPECIFICATIONS Each Object Dimension Mode is Higly Customiiable and you can to apply each custom set for all ObjectDimension, by “Apply for All” Buttonsw
Object Dimension work in Real Numbers, the user can enter the scale and the sufx to be used as anindicaton of measurementw In Figure 36 was used Scale 1 and sufx cm.
(Figure 36)
Arch-01 v5w50 developed by Salvatore Maesano / Caleidos4D http://wwwwcaleidos4dwit 26
ARCH-01
COPY AND APPLY PROPERTY AND CONTENT + MANAGER PRESET With these commands Copy and Apply the Properties of an Object Dimension to one or more other (thecommand supports multple selecton)w Copy and Apply Property, recogniie also Layer Property and UserColor PropertywWith Save as Defaults, you apply the property for all new objectwUse Restore Defaults, for restore defaults propertyw
(Figure 37)
Save the preset;
Manage the presets (open the folder Custom Presets for delete or rename the presets fles) ;
Call and Apply the presets by dynamic Menu:
(Figure 38 bis)
Arch-01 v5w50 developed by Salvatore Maesano / Caleidos4D http://wwwwcaleidos4dwit 27
ARCH-01
(Figure 39)
Arch-01 v5w50 developed by Salvatore Maesano / Caleidos4D http://wwwwcaleidos4dwit 28
ARCH-01
INFOBOX
In Arch-01 v5w50 Infobox is no longer integrated in the Arch-01 Manager but has its own separate windowInfobox work with Spline ad Polygon and recogniie the measure for an object onlywInfobox does NOT return the measurements between two objectsw
Infobox,work in Real Numbers, the user can enter the scale and the sufx to be used as an indicaton of measurement
Whit Infobox, you can get in Real Time: Select 2 Points Spline or 2 Points Polygon: Return the Distance between two Points;
(Figure 40)
Select Polygons: Return the Polygons Area;
(Figure 41)
Select 1 Spline: Return the Length Spline;
(Figure 42)
Arch-01 v5w50 developed by Salvatore Maesano / Caleidos4D http://wwwwcaleidos4dwit 29
ARCH-01
MODELING TOOLS
EXCALIBUR
When a polygon and a spline are selected, you can invoke Excalibur
(Figure 44)
With Excalibur, the polygon will be cut, to be used in modeling operatons
(Figure 45)
Arch-01 v5w50 developed by Salvatore Maesano / Caleidos4D http://wwwwcaleidos4dwit 30
ARCH-01
MAKE POLYGON
When one o more splines are selected, you can invoke Make Polygon
(Figure 46)
the spline will turn into a polygon. use SHIFT+LEFT CLICK for Not delete Spline.
(Figure 47)
Arch-01 v5w50 developed by Salvatore Maesano / Caleidos4D http://wwwwcaleidos4dwit 31
ARCH-01
CUT POLYGONS, COPY POLYGONS, PASTE POLYGONS, CLONE POLYGONS
When 1 o more polygons are selected, you can:
(Figure 50)
Cut: Cut the polygons selecton;Copy: Copy the polygons selecton;
Paste: Paste the polygons selecton after Arch-01 Cut or Arch-01 Copyw If you select a polygon object and click Paste, the polygon in memory, will be pasted in polygon object;Use SHIFT+LEFT CLICK for paste without materials.
If you want to have a new object, after Arch-01 Cut Polygons or Arch-01 Copy Polygons, select the Cinema 4D natve Command Pastw
Clone: Clone the polygons selecton
Arch-01 v5w50 developed by Salvatore Maesano / Caleidos4D http://wwwwcaleidos4dwit 32
ARCH-01
REPLACE OBJECTS
This Features is available only from Arch-01 Manager
1 - Select one Object;2 - Click in Arch-01 Manager, for open gui optons;3 - Enter the Prefx name of objects to replace with instances4 - Click Replace Button;
Options: You can Rename the instances, and add Instances in Layerw Use Purge Buton for Delete all Instances without Reference Object in your scenew
(Figure 51)
(Figure 51)
Arch-01 v5w50 developed by Salvatore Maesano / Caleidos4D http://wwwwcaleidos4dwit 33
ARCH-01
STEP COMMAND SHORTCUT
When the natve tool Move, Scale or Rotate is Actve, Arch-01 manager will show the step commandwThis is a shortcut of Cinema 4D'S Native Step Command.
Arch-01 v5w50 developed by Salvatore Maesano / Caleidos4D http://wwwwcaleidos4dwit 34
ARCH-01
LICENSE TO USE
Terms and conditons of use are indicated in this link:http://wwwwcaleidos4dwit/terminieeecondiiioniwhtm
Arch-01 v5w50 developed by Salvatore Maesano / Caleidos4D http://wwwwcaleidos4dwit 35
top related