android based home appliance control using app in mobile

ANDROID BASED HOME APPLIANCE CONTROL USING APP IN MOBILE

Presented byM. Durgaprasad (11QJ1A0411)

S. Kalyan (11QJ1A0419)

COMPONENTS REQUIREDHARDWARE

Microcontroller (AT89S52)

Bluetooth

LCD Display (2x16)

Max 232

Relay

Bulb, Fan 

SOFTWARE

Kiel U vision

Express PCB

ISP

INTRODUCTION

This project mainly focuses on the controlling of home appliances remotely and providing security.

When the user is away from the system ,This system provides ideal solution to the problems faced by home owners in daily life.

Home appliance control system (HACS) is based on Bluetooth technology and remotely controlled solution for automation of home has been introduced.

MICRO CONTROLLER AT89S52

8K Bytes of In-System Reprogrammable Flash Memory

256 x 8-bit Internal RAM

32 Programmable I/O Lines

Three 16-bit Timer/Counters

Eight Interrupt Sources

4.0V to 5.5V Operating Range

Full Duplex UART Serial Channel

Interrupt Recovery from Power-down Mode

Power-off Flag

Fast Programming Time

Flexible ISP Programming )

BLUETOOTH

Bluetooth is a wireless technology designed as a short range, low power connectivity solution for small peripheral, portable, and electronic devices like mobile phones, printer, keyboards etc.

Bluetooth is now days a major technology for Adhoc networks. It can also be used in “infrastructure based” wireless communication system.

Bluetooth uses 2.4 GHz unlicensed radio frequency for communication

HC-05 Bluetooth Module

Bluetooth Dongle

Bluetooth Block Diagram

Specifications of Bluetooth

Operates in the 2.4 GHZ band which is globally available

It has 79 channels

Hardware encryption/decryption

Can support up to 8 devices in a piconet

Omni-directional, non line of sight transmission through walls

10m to 100m range

Supports both slave and master modes.

1mW power

Extended range with external power amplifier (100 meters)

Liquid crystal display

LCD displays utilize two sheets of polarizing material with a liquid crystal solution between them.

By carefully controlling where and what wavelength (color) of light is allowed to pass, the LCD monitor is able to display images.

MAX 232

It is used for serial communication

The RS232 cables are generally referred to as DB-9 connector.

 RS-232 Voltage levels

+3 to +25 volts to signify a "Space" (Logic0)                                              

-3 to -25 volts for a "Mark" (logic 1).

RELAY (SPDT) A relay is an electrically operated switch.

Relays are used where it is necessary to control a circuit by a low-power signal.

Relays protect electrical circuits from overload or faults.

Block diagram

MICRO CONTROLLER

POWER SUPPLY

LCD DISPLAY

(16 X 2 LINES)

MAX 232RELAY 1 BULB1

Bluetooth

FAN

RELAY 2Appliance2

RELAY 3Appliance3

About Kiel u Vision2

Kiel uVision2 is an IDE (Integrated Development Environment) that helps you write, compile, and debug.

. A project manager.

. A make facility.

. Tool configuration.

. Editor.

. A powerful debugger

Highly sensitive. Taking measures to reduce the

electricity bill. Large coverage ON/OFF from any

distance. Can handle heavy loads up to 7A.

ADVANTAGES

Home appliance control. Hotel lights / fans control. Shops and showrooms. Industrial applications. Electronic applications for

security.

APPLICATIOS

FEATURE SCOPE

It with the internet to monitor your home while sitting in a remote area

This will not only improve the security of your home, also assist in conservation of energy .

conclusion

By designing the Android user interface and Home information centre,

It has combined android client, network transmission, and wireless switch

Android phone have advantages such as humane interface

Android phone allows us anytime, anywhere to control any device

THANK

YOU

ANYQ…………?