alcatel mw software installation & commissioning

All rights reserved © 2010, Mobiserve

ALCATEL MICROWAVE(SOFTWARE INSTALLATION & MW LINK CONFIGURATION)

Prepared By: RIZWAN AHMED RAFIQ Operation Support Engineer (Training & Consultancy)

All rights reserved © 2010, Mobiserve

INSTALLATION OF ALCATEL MICROWAVE

1320CRAFT TERMINAL

All rights reserved © 2010, Mobiserve

De- activate the Windows Firewall

Ensure that the name of CD is REGAWY_2.02

Software should auto initialize

STEPS BEFORE INSTALLATION

All rights reserved © 2010, Mobiserve

Select CT products installation guided as the following screen appears and press “NEXT”

AUTO INITIALIZE WINDOW WILL APPEAR

All rights reserved © 2010, Mobiserve

The following screen will be appeared, select “JRE V1.4.1” and “Alcatel lower layer Manager V3.4.0” only and press “Next”

SELECT 1ST & 2ND OPTIONS

All rights reserved © 2010, Mobiserve

CLICK “NEXT”

All rights reserved © 2010, Mobiserve

CHECK “CONFIGURE LOWER LAYERS” &CLICK “FINISH”

All rights reserved © 2010, Mobiserve

1 - Insert 12 Zero’s in System Identifier Window

2 - Select “Serial Port”

3 - Select Appropriate COM

Port

4 - Select “Port Speed” as “Default”

5 - Click “OK”

ENTER FOLLOWING CONFIGURATIONS & CLICK “NEXT”

All rights reserved © 2010, Mobiserve

CLICK “YES”

All rights reserved © 2010, Mobiserve

You can also configure the Lower Layer by Double Clicking the “Alcatel Lower

Layers”

“CONTROL PANEL” VIEW CHANGED

All rights reserved © 2010, Mobiserve

INSTALLATION OF ALCATEL LOWER LAYER

MANAGER

All rights reserved © 2010, Mobiserve

Click “Add Hardware”

OPEN “CONTROL PANEL” & CLICK “ADD HARDWARE”

All rights reserved © 2010, Mobiserve

CLICK “NEXT”

All rights reserved © 2010, Mobiserve

WINDOWS WILL SEARCH FOR NEW HARDWARE

All rights reserved © 2010, Mobiserve

SELECT 1ST OPTION & CLICK “NEXT”

All rights reserved © 2010, Mobiserve

SELECT “ADD A NEW HARDWARE” & CLICK “NEXT”

All rights reserved © 2010, Mobiserve

SELECT 2ND OPTION & CLICK “NEXT”

All rights reserved © 2010, Mobiserve

SELECT “NETWORK ADAPTERS” & CLICK “NEXT”

All rights reserved © 2010, Mobiserve

CLICK “HAVE DISK”

All rights reserved © 2010, Mobiserve

SELECT APPROPRIATE DRIVERS & CLICK “OK”

All rights reserved © 2010, Mobiserve

“ALCATEL VIRTUAL NETWORK CARD for LOWER LAYERS” WILL BE APPEARED CLICK “NEXT”

All rights reserved © 2010, Mobiserve

CLICK “NEXT”

All rights reserved © 2010, Mobiserve

WINDOWS LOGO TEST

All rights reserved © 2010, Mobiserve

CLICK “FINISH”

All rights reserved © 2010, Mobiserve

New LAN Connection will be established. Double click the LAN

Connection to configure.

OPEN “LAN CONNECTION”

All rights reserved © 2010, Mobiserve

Uncheck all other options except

“Internet Protocol (TCP/IP)”

SELECT “INTERNET PROTOCOL (TCP/IP)” & CLICK “OK”

All rights reserved © 2010, Mobiserve

ENTER FOLLOWING CONFIGURATIONS & CLICK “OK”

Select 2nd Option i.e “Use the following IP address”

Enter the following IP Address and Subnet Mask

Select “Advanced”

All rights reserved © 2010, Mobiserve

2 - Select “Disable NetBIOS

over TCP/IP”

1 - Select the “WINS” Tab

APPLY FOLLOWING SETTINGS & CLICK “OK”

All rights reserved © 2010, Mobiserve

“Alcatel Lower Layer Manager” Has Been Successfully Installed.Now follow the following path, if the CD does not auto play, to run the installation of remaining software:

Matersetup-REG_9400AWY Disk 1 Setup.exe

All rights reserved © 2010, Mobiserve

Select “CT products Automatic Installation” as the following screen appears and click next

All rights reserved © 2010, Mobiserve

CLICK “NEXT”

All rights reserved © 2010, Mobiserve

Go to control panel → add and remove program and so remove the component as the following orders :

CT–NE–ConfUpd (if present)

ALCATEL JUSM Help On Line (for all versions you like to remove)

ALCATEL SW Package REG.9400AWY (for all versions you like to remove)

ALCATEL Radio Common JUSM (for all versions you like to remove)

ALCATEL Q3CT–K–ADD–ONvX.Y.Z (1320CT)

UNINSTALLATION OF SOFTWARE

All rights reserved © 2010, Mobiserve

ALCATEL SNMPCT–K–ADD–ONvX.Y.Z (1320CT)

ALCATEL HOLCT–K–ADD–ONvX.Y.Z (1320CT)

ALCATEL CT–KvX.Y.Z (1320CT)

Alcatel Lower Layers Manager & Tiny Tools

Java 2 Runtime Environment. SE vX.Y.Z_KJ

And then restart your laptop.

UNINSTALLATION OF SOFTWARE

All rights reserved © 2010, Mobiserve

ALCATELMICROWAVE LINK

CONFIGURATION STEPS

All rights reserved © 2010, Mobiserve

How To View The Current Configuration ?

All rights reserved © 2010, Mobiserve

Click “Quick Configuration”

All rights reserved © 2010, Mobiserve

Market Same and click next

All rights reserved © 2010, Mobiserve

Keep as your equip and click next

All rights reserved © 2010, Mobiserve

Click next..

All rights reserved © 2010, Mobiserve

Set “Frequency and ATPC&MTPC”

All rights reserved © 2010, Mobiserve

Set local-end IP

All rights reserved © 2010, Mobiserve

Click Next…

All rights reserved © 2010, Mobiserve

Far-end IP (Must be 1 up or down from local-end)

All rights reserved © 2010, Mobiserve

NMS RF Enable and click next

All rights reserved © 2010, Mobiserve

NMS V11 Disable and Next

All rights reserved © 2010, Mobiserve

NMS 0703 Disable and next

All rights reserved © 2010, Mobiserve

Disable and next

All rights reserved © 2010, Mobiserve

YES

All rights reserved © 2010, Mobiserve

Pole Mounting Assembly (1+1)

THANK YOU