advanced diploma of - rpl / credit sample formsmem05 metal and engineering training package v4...
Post on 08-Jul-2020
0 Views
Preview:
TRANSCRIPT
MEM05 Metal and Engineering Training Package v4
Student Name:
Student No:
Recognition Application Version 1.0
TRAINING AND EDUCATION SUPPORT
INDUSTRY SKILLS UNIT
MEADOWBANK
Product Code: 5487
MEM60111 Advanced Diploma of
Engineering - RPL / Credit
Forms
SAMPLE
Page 4 of 85
MEM60111 Advanced Diploma of Engineering - Recognition Application
Acknowledgments
TAFE NSW Training and Education Support Industry Skills Unit, Meadowbank would like to
acknowledge the support and assistance of the following people in the production of the TAFE
NSW MEM60111 Advanced Diploma of Engineering Recognition Tool.
Writer Reviewer
Gordon McLean Jim Miles
Project Manager
Stephen Davies
Education Program Manager
TAFE NSW Training and Education Support
Industry Skills Unit, Meadowbank
Further acknowledgements
The following materials have been used as research for this resource:
MEM05 Metal and Engineering v4 Training Package
MSA Website www.mskills.com.au
http://training.gov.au Formally known as (National Training Information Service)
TAFENSW Corporate Systems
Enquiries
Enquiries about this and other publications can be made to:
TAFE NSW Training and Education Support, Industry Skills Unit, Meadowbank
Locked Bag No. 6 MEADOWBANK NSW 2114
Phone: (02) 9942 3200 Fax: (02) 9942 3257
ISBN 978-1-74236-251-9
© The State of New South Wales, Department of Education and Training,
TAFE NSW, Training and Education Support, Industry Skills Unit,
Meadowbank.
Copyright of this material is reserved to TAFE NSW, Training and Education Support,
Industry Skills Unit, Meadowbank. Reproduction or transmittal in whole or in part,
other than for the purposes of private study or research, and subject to the provisions
of the Copyright Act, is prohibited without the written authority of TAFE NSW, Training
and Education Support, Industry Skills Unit, Meadowbank.
SAMPLE
Page 5 of 85
MEM60111 Advanced Diploma of Engineering - Recognition Application
Table of Contents
Instructions on how to use this RPL/Credit resource…………………………………………………………….7
Important note on prerequisite units……………………………………………………………………………………..8
SECTION 4 RECOGNITION GUIDES .............................................................. 9
CLUSTER 1 COMMUNICATION AND MANAGEMENT ........................................................... 9 MEM16006A Organise and communicate information ........................................................................ 9 MEM22001A Perform engineering activities .................................................................................... 10 MEM22002A Manage self in the engineering environment ................................................................ 11 MEM22003A Manage engineering resources ................................................................................... 12 MEM22004A Manage engineering projects ..................................................................................... 13 MEM22005A Manage engineering operations ................................................................................. 14 MEM22006A Source and estimate materials ................................................................................... 15 MEM22007A Manage environmental effects of engineering activities ................................................. 16 MEM22008A Manage change and technical development ................................................................. 17 MEM22009A Manage technical sales and promotion ........................................................................ 18
CLUSTER 2 COMPUTER TECHNOLOGY ......................................................................... 19 MEM16008A Interact with computing technology ............................................................................ 19 MEM30027A Prepare basic programs for programmable logic controllers ........................................... 20 MEM23003A Operate and program computers and/or controllers in engineering situations .................. 21
CLUSTER 3 MATHEMATICS ...................................................................................... 22 MEM30012A Apply mathematical techniques in a manufacturing engineering or related environment .... 22 MEM23001A Apply advanced mathematical techniques in a manufacturing engineering or related ent
environment ………………………………………………………………………………………………………………………..23 MEM23002A Apply calculus in engineering situations ...................................................................... 24
CLUSTER 4 ENGINEERING GRAPHICS AND DESIGN ........................................................ 25 MEM30001A Use computer aided drafting systems to produce basic engineering drawings .................. 25 MEM30002A Produce basic engineering graphics ............................................................................ 26 MEM30003A Produce detailed engineering drawings ....................................................................... 27 MEM30004A Use CAD to create and display 3D models ................................................................... 28 MEM30008A Apply basic economic and ergonomic concepts to evaluate engineering applications ......... 29 MEM30009A Contribute to the design of basic mechanical systems ................................................... 30 MEM23091A Apply mechanical system design principles and techniques in mechanical
engineeringsituations………… ...................................................................................... 31 MEM23092A Apply automated systems principles and techniques in engineering situations ................. 32 MEM23093A Apply plant and process design principles and techniques in engineering situations .......... 33 MEM23094A Apply maintenance systems principles and techniques in engineering situations .............. 34
CLUSTER 5 ENGINEERING MATERIALS ....................................................................... 35 MEM30007A Select common engineering materials......................................................................... 35 MEM23061A Select and test mechanical engineering materials ........................................................ 36 MEM23062A Select and test mechatronic engineering materials ....................................................... 37
CLUSTER 6 ENGINEERING SCIENCE .......................................................................... 38 MEM30005A Calculate force systems within simple beam structures ................................................. 38 MEM30006A Calculate stresses in simple structures ........................................................................ 39 MEM23041A Apply basic scientific principles and techniques in mechanical engineering situations ........ 40 MEM23051A Apply basic electro and control scientific principles and techniques in mechanical and
manufacturing engineering situations ......................................................................... 41 MEM23081A Apply scientific principles and techniques in mechanical engineering situations ................ 42 MEM23082A Apply scientific principles and techniques in mechatronic engineering situations ............... 43 MEM23083A Apply industrial engineering principles and techniques in competitive manufacturing
engineering engineering situations ............................................................................. 44
SAMPLE
MEM60111 Advanced Diploma of Engineering - Recognition Application
Page 6 of 85
CLUSTER 7 ENGINEERING METHODS ......................................................................... 45 MEM23071A Select and apply mechanical engineering methods, processes and construction techniques
……………………………………………………………………………………………………………………………………………..45 MEM23072A Select and apply mechatronic engineering methods, processes and construction techniques
……………………………………………………………………………………………………………………………………………..46 MEM30010A Set up basic hydraulic circuits .................................................................................... 47 MEM30011A Set up basic pneumatic circuits .................................................................................. 48 MEM30025A Analyse a simple electrical system circuit .................................................................... 49 MEM30026A Select and test components for simple electronic switching and timing circuits ................ 50 MSAENV272B Participate in environmentally sustainable work practices .............................................. 51
CLUSTER 8 MANUFACTURING TECHNOLOGIES .............................................................. 52 MEM30013A Assist in the preparation of a basic workplace layout .................................................... 52 MEM30014A Apply basic just in time systems to the reduction of waste ............................................ 53 MEM30015A Develop recommendations for basic set up time improvements ..................................... 54 MEM30016A Assist in the analysis of a supply chain ....................................................................... 55 MEM30017A Use basic preventative maintenance techniques and tools ............................................. 56 MEM30018A Undertake basic process planning .............................................................................. 57 MEM30019A Use resource planning software systems in manufacturing ............................................ 58 MEM30020A Develop and manage a plan for a simple manufacturing related project .......................... 59 MEM30021A Prepare a simple production schedule ......................................................................... 60 MEM30022A Undertake supervised procurement activities ............................................................... 61 MEM30023A Prepare a simple cost estimate for a manufactured product ........................................... 62 MEM30024A Participate in quality assurance techniques .................................................................. 63 MEM30028A Assist in sales of technical products/systems ............................................................... 64
SECTION 5 TEMPLATES AND REPORTS ...................................................... 65 Attachment 1: Resumé of employment, education and life experiences ............................................... 65 Attachment 2: Portfolio of supporting evidence ................................................................................. 67 Attachment 3: Confidential supervisor’s report ................................................................................. 68 Attachment 4: Confidential third party report ................................................................................... 70 Attachment 5: Student recognition skills gap training plan ................................................................. 73
APPENDIX A …………………………………………………………………………..............................75
SAMPLE
Page 9 of 85
MEM60111 Advanced Diploma of Engineering - Recognition Application
Section 1: Recognition Guides
Cluster 1 Communication and management
MEM16006A Organise and communicate information
Unit description: This unit covers accessing, organising and communicating information related to processes or tasks.
Element of competency
Refer also to elements, performance criteria and essential skills and knowledge
Suggested supporting
evidence
Assessor’s validation of
evidence Outcomes
1. Access information and/or records.
2. Organise and analyse information.
3. Communicate organised information
using established workplace methods.
Examples of recent skills
updates/training
Position description
Reports
Resumé
Self-assessment records/reports
Staff appraisals
Supervisor’s report
Third party reports
Workplace evidence/documents
Questioning
Reports
Supervision reports
Third party reports
Work based project
Workplace evidence
Other (please specify)
Competent
Skills gap training
required
Further information
required
Assessor’s name:
Assessor’s initials:
_____________________
Date:
_____________________
SAMPLE
Page 10 of 85
MEM60111 Advanced Diploma of Engineering - Recognition Application
MEM22001A Perform engineering activities
Unit description: This unit covers the performance of technical aspects of engineering work in accordance with established
engineering principles and practices.
Element of competency Refer also to elements, performance criteria and
essential skills and knowledge
Suggested supporting
evidence
Assessor’s validation of
evidence Outcomes
1. Identify and implement engineering
practices.
2. Negotiate, document and monitor
outcomes and performance measures.
3. Negotiate, development and document
work instructions.
4. Perform hazard and risk analysis.
5. Monitor progress, respond appropriately.
6. Conclude engineering activities
appropriately.
7. Evaluate career options and develop
career development strategy.
Examples of recent skills
updates/training
Industry meeting minutes
Position description
Presentations
Reports
Resumé
Self-assessment records/reports
Staff appraisals
Supervisor’s report
Third party reports
Training programs
Workplace evidence/documents
Interviewing
Questioning
Reports
Third party reports
Work based project
Workplace evidence
Other (please specify)
Competent
Skills gap training
required
Further information
required
Assessor’s name:
Assessor’s initials:
_____________________
Date:
_____________________
SAMPLE
Page 11 of 85
MEM60111 Advanced Diploma of Engineering - Recognition Application
MEM22002A Manage self in the engineering environment
Unit description: This unit covers performing work ethically and competently, making judgements about work priorities and
information requirements to achieve effective working relationships and engineering outcomes.
Elements of competency Refer also to performance criteria and essential
skills and knowledge
Suggested supporting
evidence
Assessor’s validation of
evidence Outcomes
1. Manage self.
2. Work effectively with team.
3. Manage information.
4. Manage work priorities and resources.
5. Facilitate and capitalise on change and
innovation.
6. Establish and maintain business
relationships.
Industry meeting minutes
Planning documents
Position description
Presentations
Publications
Reports
Resumé
Self-assessment records/reports
Staff appraisals
Supervisor’s report
Third party reports
Workplace evidence/documents
Interviewing
Questioning
Reports
Third party reports
Work based project
Workplace evidence
Other (please specify)
Competent
Skills gap training
required
Further information
required
Assessor’s name:
Assessor’s initials:
_____________________
Date:
_____________________
SAMPLE
Page 12 of 85
MEM60111 Advanced Diploma of Engineering - Recognition Application
MEM22003A Manage engineering resources
Unit description: This unit covers skills and knowledge required for coordinating business planning, managing resources and applying
engineering regulations related to use of resources.
Elements of competency Refer also to performance criteria and essential
skills and knowledge
Suggested supporting
evidence
Assessor’s validation of
evidence Outcomes
1. Participate in team business planning
2. Develop client relations.
3. Manage cost.
4. Manage physical resources.
5. Manage human resources and relations.
6. Manage business information.
7. Manage and review service delivery.
Examples of recent skills
updates/training
Industry meeting minutes
Planning documents
Position description
Presentations
Publications
Reports
Resumé
Staff appraisals
Supervisor’s report
Third party reports
Workplace evidence/documents
Interviewing
Questioning
Reports
Third party reports
Work based project
Workplace evidence
Other (please specify)
Competent
Skills gap training
required
Further information
required
Assessor’s name:
Assessor’s initials:
_____________________
Date:
_____________________
SAMPLE
Page 13 of 85
MEM60111 Advanced Diploma of Engineering - Recognition Application
MEM22004A Manage engineering projects
Unit description: This unit covers managing engineering projects within a program of work, ensuring that time, cost and quality are
managed efficiently and that progress is communicated to achieve the project objectives.
Elements of competency Refer also to performance criteria and essential
skills and knowledge
Suggested supporting
evidence
Assessor’s validation of
evidence Outcomes
1. Scope the project.
2. Manage people.
3. Manage the physical resources within
the project.
4. Manage quality, safety and
environmental risk.
5. Manage procurement.
6. Manage time and progress
7. Finalise the project.
Examples of recent skills
updates/training
Industry meeting minutes
Planning documents
Position description
Presentations
Publications
Reports
Resumé
Self-assessment records/reports
Staff appraisals
Supervisor’s report
Third party reports
Workplace evidence/documents
Interviewing
Questioning
Reports
Third party reports
Work based project
Workplace evidence
Other (please specify)
Competent
Skills gap training
required
Further information
required
Assessor’s name:
Assessor’s initials:
_____________________
Date:
_____________________
SAMPLE
top related