additional wireless power monitor, 8 channels · web viewin order to pair each transmitter (en-p8)...
Post on 26-Mar-2020
1 Views
Preview:
TRANSCRIPT
Additional wireless power monitor, 8 – channel
Additional wireless power monitor, 8 channels
EN-P8
USER GUIDE
Version 1.0
For further details, please contact:
Enistic Limited, 4 Isis Business Centre, Pony Road, Oxford, OX4 2RD
info@enistic.comwww.enistic.com
© Copyright 2015 Enistic Limited.
www.enistic.com Page 1
Additional wireless power monitor, 8 – channel
CONTENTS
Overview...............................................................................................................................................3
Hardware architecture..........................................................................................................................3
Wiring Guide..........................................................................................................................................3
Pairing Transmitter With a Ethernet Receiver – Photograph.................................................................3
Battery Replacement.............................................................................................................................3
Current Transformer Connection – Photograph....................................................................................3
Current Transformers Dimension..........................................................................................................3
Specifications.........................................................................................................................................3
DOCUMENT HISTORY
Version Date Author Notes
1.0 19 Jan 2015 Wasil Ali Preliminary release of alpha test details.
www.enistic.com Page 2
Additional wireless power monitor, 8 – channel
OVERVIEW
Additional wireless power monitor, 8 channel (EN-P8) reads data from current clamps and sends back to the wireless receiver. It is a low cost solution and suitable for office and industrial monitoring applications. EN-P8 has eight inputs to attach Current Sensor (CT5 – CT3000) supporting readings from devices up to 3000A. It communicates with the controller through the Wireless communications (RF 433MHz ISM band). It comes in a small enclosure and can be mounted on a wall. Simple to Install and easy to configure.
• Suitable for residential, commercial and industrial monitoring purposes.
• Manufactured to comply with IEC 60687/61036/61268 and IEC 62053-21/62053-22/62053-23.
• Single receiver can handle multiple transmitters.
• Plug and play. Easy to install on site.
• Wireless, low power operation.
FEATURES
• Highly accurate design.
• Manufactured to comply with international standards IEC 60687/61036/61268 and IEC 62053-21/62053-22/62053-23.
• Connects with controller on 433 MHz Band.
• Encrypted communications for secure operation.
• Good range.
ORDER CODES
EN-P8 - Additional wireless power monitor, single phase
EN126 - Battery 3.7V, TR18650, 3800mAh
Split core current sensor sizes for EN-P8 with order code in bold:
EN114 - CT5, EN115 - CT10, EN116 - CT15, EN117 - CT30,
EN118 - CT60, EN119 - CT100, EN120 - CT200, EN121 - CT400,
EN122 - CT600, EN123 - CT1500, EN124 - CT3000
www.enistic.com Page 3
Additional wireless power monitor, 8 – channel
HARDWARE ARCHITECTURE
Figure 1: Hardware Architecture
Wireless power monitor, 8 channel is consists of a processor and RF transceiver to communicate
with the wireless Receiver. This device is responsible for taking the readings from Current Clamps
and send readings to the controller via RF link. Frequency off the link is 433MHz. It transmits reading
to the receiver every 5 minutes
www.enistic.com Page 4
Additional wireless power monitor, 8 – channel
WIRING GUIDE
Figure 3: Current Transformer Connection
Figure 4: Rechargeable Battery
Figure 5: Battery Charger.
www.enistic.com Page 5
Additional wireless power monitor, 8 – channel
PAIRING TRANSMITTER WITH A ETHERNET RECEIVER – PHOTOGRAPH
In order to pair each transmitter (EN-P8) with the receiver (EN112) press the pairing mode button at
the back of the receiver (EN112). During pairing mode the radio activity and server activity LEDs start
flashing for about one minute. While receiver is in pairing mode connect the battery in the
transmitter and wait so that it pairs with the receiver. Once it pairs you will see the radio activity and
server activity LEDs stop flashing.
You need to repeat the above step each time if you have multiple transmitters (EN-P8).
Figure 5: Ethernet Receiver Connection Layout
www.enistic.com Page 6
EN112
Additional wireless power monitor, 8 – channel
BATTERY REPLACEMENT
Figure 6: Battery Replacement
BATTERY DETAILS
Nominal Voltage 3.7V
Nominal Capacity 3.8 Ah (3800mAh)
Maximum Continuous Discharge Current 70mA
Battery Weight 36g
Temperature Range –60°C ...+85 °C
Diameter 18.2mm
Length 65mm
www.enistic.com Page 7
Additional wireless power monitor, 8 – channel
CURRENT TRANSFORMER CONNECTION – PHOTOGRAPH
Figure 7: Current Transformer
Figure 8: Current Transformer Connection
www.enistic.com Page 8
Additional wireless power monitor, 8 – channel
CURRENT TRANSFORMERS DIMENSION
www.enistic.com Page 9
Additional wireless power monitor, 8 – channel
SPECIFICATIONS
ElectricalItem Value UnitBattery for EN1131 3.7 Vdc
Battery Type Lithium IonBattery Capacity 3800 mAhPower Consumption (Typical / Maximum)
9 / 250 mW
PhysicalItem Value UnitSize (l x w x h) 218 x 42 x 33 mmFitting Wall mountStorage temperature (min -> max) -10 -> +30 °COperation temperature (min -> max) -10 –> +85 °C
Measurements and MetrologyItem Value UnitChannels 8Nominal Current 5-3000* AMin. Current 0* AMin. Current 1% ** 0.05-150* AMax. Current 5-3150* AMax. Current 1% ** 4.95-2850* AProbe Cable Length 1000-1500* mm*Depends on Current Sensor connected to meter
** Min 1% and max 1% readings indicate the minimum and maximum currents that are guaranteed to give a 1% accurate reading. Currents above or below this figure (but below the absolute maximum rating) will still give readings but the accuracy is not guaranteed to be less than 1%.
NB If the sensors are used to measure current above the maximum rating then operation and accuracy are not guaranteed.
CommunicationItem Value UnitStandard RF -Frequency 433 MHzMaximum Range between Tx and Rx (LOS) 100 m
Encryption YesMiscellaneous and StandardsItem Value UnitCountry of Design / Manufacture UKPackaging Cardboard box
www.enistic.com Page 10
top related