a ss90™hd tma - trinity highway · ss90™hd tma product bulletin pump conversion (ss90™hd...
Post on 16-Feb-2021
10 Views
Preview:
TRANSCRIPT
-
a
SS90™HD TMAa
Product BulletinPump Conversion
(SS90™HD Frame to SS90™ Pump)Instructional Manual
Revision A May 2013Part No. 620207B
-
Part No. 620207B www.energyabsorption.com Revision A April 2013 www.highwayguardrail.com 1 All rights in copyright reserved
SS90™HD TMA Product Bulletin
Pump Conversion (SS90™HD Frame to SS90™ Pump)
Instructional Manual
2525 Stemmons Freeway
Dallas, Texas 75207
Important: These instructions are to be used only in conjunction with the assembly, maintenance, and repair of the SS90™HD TMA. These instructions are for standard assemblies specified by the appropriate highway authority only. In the event the specified system assembly, maintenance, or repair would require a deviation from standard assembly parameters, contact the appropriate highway authority engineer. This system has been accepted by the Federal Highway Administration for use on the national highway system under strict criteria utilized by that agency. Energy Absorption Systems representatives are available for consultation if required.
This Manual must be available to the worker overseeing and/or assembling the product at all times. For additional copies, contact Energy Absorption Systems at (888) 323-6374 or download from websites below.
-
www.energyabsorption.com Revision A April 2013 www.highwayguardrail.com 2 All rights in copyright reserved
Customer Service Contacts Energy Absorption Systems (a Trinity Highway Products company) is committed to the highest level of customer service. Feedback regarding the SS90™HD TMA system, its assembly procedures, supporting documentation, and performance is always welcome. Additional information can be obtained from the contact information below:
Energy Absorption Systems:
Telephone: (888) 323-6374 (USA) (214) 589-8140 (International)
E-mail: customerservice@energyabsorption.com
Internet: Energy Absorption Systems Trinity Highway Products, LLC
http://www.energyabsorption.com http://www.highwayguardrail.com
Pump Conversion Area
Figure 1
-
www.energyabsorption.com Revision A April 2013 www.highwayguardrail.com 3 All rights in copyright reserved
Pump Conversion Instructions 1) Measure, mark, and drill ⌀ 3/8” (2) holes on the Support Backup.
Drill (2) holes,⌀ 3/8”
Figure 2
Support Bracket Pump Mounting Holes
-
www.energyabsorption.com Revision A April 2013 www.highwayguardrail.com 4 All rights in copyright reserved
2) Measure, mark, and drill ⌀ 3/8” (2) holes on the Front Frame.
Figure 3
Front Bracket
-
www.energyabsorption.com Revision A April 2013 www.highwayguardrail.com 5 All rights in copyright reserved
3) Mount Pump Adapter Bracket to SS90™HD Pump mounting holes (See Figure 1).
4) Mount Pump to Adapter Bracket using existing hardware.
5) Mount Electrical Controller Box to Adapter Bracket using existing Bracket and hardware on Electrical Box.
Figure 4
Figure 5
Electrical Control Box
Pump
Pump
Electrical Controller Box
Pump Adaptor Bracket
Pump Adaptor Bracket
Bend Bracket Slightly
-
www.energyabsorption.com Revision A April 2013 www.highwayguardrail.com 6 All rights in copyright reserved
6) Reconnect hydraulic hoses and wiring.
Figure 6
Pump
Pump Adapter Bracket Electrical Controller Box
Bend Bracket Slightly
-
www.energyabsorption.com Revision A April 2013 www.highwayguardrail.com 7 All rights in copyright reserved
7) Adjust Proximity Actuator as described on drawing 620234B.
Figure 7
Proximity Actuator
Proximity Sensor
-
www.energyabsorption.com Revision A April 2013 www.highwayguardrail.com 8 All rights in copyright reserved
DWG 620208
-
www.energyabsorption.com Revision A April 2013 www.highwayguardrail.com 9 All rights in copyright reserved
DWG 620234 Sheet 5 of 6
-
www.energyabsorption.com Revision A April 2013 www.highwayguardrail.com 10 All rights in copyright reserved
DWG 620234 Sheet 6 of 6
-
2525 Stemmons FreewayDallas, Texas 75207
888-323-6374 (USA only)214-589-8140 (Outside USA)
www.energyabsorption.comwww.highwayguardrail.com
top related