a rapid method for predicting the durability of coating ... · thenationalbureauofstandards...
Post on 24-Jul-2018
217 Views
Preview:
TRANSCRIPT
^cf
NATIONAL BUREAU OF STANDARDS REPORT
6256
A RAPID METHOD FOR PREDICTING THE DURABILITY
OF COATING- GRADE ROOFING ASPHALTS
by
John P. Falzone
and
George D, McDonald
<^B§>U. S. DEPARTMENT OF COMMERCE
NATIONAL BUREAU OF STANDARDS
THE NATIONAL BUREAU OF STANDARDS
Functions and Activities
The functions of the National Bureau of Standards are set forth in the Act of Congress, March
3, 1 00 1 , as amended hy Congress in Public Law 619, 1950. These include t lie development and
maintenance of the national standards of measurement and the provision of means and methods
for making measurements consistent with these standards; the determination of physical constants
and properties of materials; the development of methods and instruments for testing materials,
devices, am! structures; advisory services to Government Agencies on scientific and technical
problems; invention and development of devices to serve special needs of the Government; and the
development of standard practices, codes, am! specifications. The work includes basic and applied
research, development, engineering, instrumentation, testing, evaluation, calibration services, and
various consultation and information services. A major portion of the Bureau’s work is performed
for other Government Agencies, particularly the Department of Defense and the Atomic Energy
Commission. The scope of activities is suggested by the listing of divisions and sections on the
inside of the back cover.
Reports and Publications
The results of the Bureau’s work take the form of either actual equipment and devices or
published papers and reports. Reports are issued to the sponsoring agency of a particular project
or program. Published papers appear either in the Bureau’s own series of publications or in the
journals of professional and scientific societies. The Bureau itself publishes three monthly pert-
odieals, available from the Go\ eminent Printing Office: The journal of Research, which presents
complete papers reporting technical investigations; the Technical News Bulletin, which presents
summary and preliminary reports on work in progress; and Basic Radio Propagation Predictions,
which provides data for determining the best frequencies to use for radio communications throughout
the world. There are also five series of nonperiodical publications: The Applied Mathematics
Scries, Circulars, Handbooks, Building Materials and Structures Reports, and Miscellaneous
Publications.
Information on the Bureau's publications van he found in NBS Circular 4C0, Publications of
the National Bureau of Standards (SI.25) and its Supplement ($0.75), available from the Superin-
tendent of Documents, Government Printing Office, Washington 25. D. C.
Inquiries regarding the Bureau s reports should be addressed to the Office of Technical Informa-
tion, National Bureau of Standards. Washington 25. D. C.
NATIONAL BUREAU OF STANDARDS REPORTMBS PROJECT NB9 REPORT1004-12-1041 January 9, 1959 6256
A RAPID METHOD FOR PREDICTING THE DURABILITY
.OF COATING-GRADE ROOFING ASPHALTS
by
John P. Falzone ,
and
George D. McDonald
Research AssociatesAsphalt Roofing Industry Bureau
Floor, Roof and Wall Coverings SectionBuilding Technology Division
Jointly Sponsored byAsphalt Roofing Industry Bureau
and
National Bureau of Standards
IMPORTANT NOTICE
NATIONAL BUREAU OF f
Intended for uee within th<
to additional evaluation an*
Hating of thla Report, elthe
the Office of the Director, I
however, by the Governmeito reproduce additional co|
Approved for public release by the
Director of the National Institute of
Standards and Technology (NIST)
on October 9, 201 5.
r progren accounting document!
formally published It U subjected
tg, reproduction, or opendlterature
ilsslon la obtained In writing from
. Such pormlMlon la not needed,
lly prepared If that agency wlahea
<NBS>
U. S. DEPARTMENT OF COMMERCE
NATIONAL BUREAU OF STANDARDS
A RAPID METHOD FOR PREDICTING THE DURABILITYOF COATING- GRADE ROOFING ASPHALTS
by
John P, Falzoneand
George D 0 McDonald
5j< ^
ABSTRACT
Twelve coating-grade asphalts, representative ofthose commercially available in the manufactureof roofing were studied to determine whether therates of filtration, changes in constituents orlosses in weight could be correlated with theirdurability
o
Rates of filtration determined by the method de-scribed distinguished between the better and thepoorer weatherers, but a quantitative correlationwas poor although the method proved simple and re-producible o
Average rate of changes of total oils, dark oils,asphaltenes or asphaltenes plus loss in weightshowed excellent correlations, but were inapplicableto early predictions of durabilities since theirrates of change were not comparable throughout theexposure cycle 0
Average rate of loss in weight was related to dura-bility,, In addition, the weight change for eachasphalt was nearly linear with time and was com-parable in early periods of exposure 0 The loss at300 hours is consequently recommended as a rapid,reliable criterion for predicting the durabilityof a blown, coating-grade asphalt,,
^ % >|c ^
2
1„ INTRODUCTION
This investigation is part of the long established asphaltresearch project jointly sponsored by the National Bureau ofStandards and the Asphalt Roofing Industry Bureau,
It has been known for some time that other factors being equal,the durability of roll roofings or shingles depends upon thenature of the asphalt employed in its manufacture. In turn,the nature of the asphalt is principally a function of thesource of the petroleum crude from which it is derived and,to a lesser extent, the processing used to convert theresiduum into the coating-grade product having the necessaryphysical characteristics. Because of the relatively longlife of even the poorest roofing, a rapid, reliable evalua-tion of the weathering properties of an asphalt has longbeen an objective in the research project. The inherentchemical and rheological complexity of an asphaltic systemhas impeded the attainment of a simple satisfactory solutionto this problem.
Early investigators concentrated their efforts towards de-veloping methods for accelerated weathering. Since theeffects of light, heat and oxygen were recognized as fac- ,
tors contributing to the degradation of the coating (1, 2)~,the carbon arc lamp was soon introduced to asphalt studies(3)o Later developments led to the periodic use of a waterspray. Subsequent work on the effects of current and vol-tage (*+), exposure temperature ( 5 ) 9
accelerated cycle used(6), film preparation ( 7 )
,
inspection procedure and end-pointdeterminations (8, 9) ultimately led to some recommendedpractices in accelerated testing of bituminous products.
Unfortunately, the quantitative relationship betweenaccelerated and natural weathering is as yet not satisfac-torily resolved. However, there is sufficient evidence toindicate that the relative order of failure for asphaltshaving significant differences in weather resistance is thesame for both weatherometer and roof exposures (6),
1/Figuresthe end
in parentheses indicateof this report.
literature references at
- 3 -
The purpose of this investigation was to evaluate severalproposed criteria for predicting durability employingaccelerated tests as primary standards, namely
s
(1) The filtration rate of n-pentane solubles throughthe insolubles of an asphalto
(2) The rate of changes in components 0
(3) The rate of losses in weighto
2 0 EXPERIMENTAL PROCEDURES
2d Asphalts
Twelve samples, representative of commercially availableasphalts, were submitted by several members of the ResearchCommittee of the Asphalt Roofing Industry Bureau, four fromCalifornia, four from Midcontinent, and three from Venezuelancrudes. An additional Midcontinent sample, blown in alaboratory still to a significantly lower softening point,was included o The lower softening point of this samplerendered difficult the determination of its durability..
2 0 2 Sampling
Enough material was taken from a 5-gallon sample and atleast one inch below the surface so that every determinationthat was made for each asphalt was done on a portion pouredfrom the same melt* This precaution was taken because ofthe recognized susceptibility of asphalts to both reversibleand irreversible changes even at room temperatures* The sur-face of samples in storage for three years, for example, hasbeen shown to change as much as 8% in pentane insoluble(asphaltene) content (10),
2 0 3 Softening Points
Two softening point determinations were made for each asphaltby the Ring and Ball method as prescribed in A 0 S 0 T 0 M 0 Proce-dure D36-26o
- 1+ -
The first specimen was poured immediately prior to castingthe films necessary for accelerated testing, the secondimmediately after, The results presented in Table 1 areaverages of the two 0
2 a b Penetrations
Penetrations at 32% 77° and 115°F were determined for eachasphalt employing A 0 S 0 T„M 0 Procedure D5-#9» The specimensfor these determinations were poured immediately after halfof the necessary films for determining durability were cast.The results are shown in Table 1 0 The susceptibility factoris defined as the ratio of the penetration at 115°F minus thepenetration at 32°F to that at 77°F for a given asphalts
2,5 Filtration Rate
In the primary separation of an asphalt into asphaltenes,white oils, dark oils and resins (11), n-pentane is nor-mally added to a sample in order to precipitate theasphaltenes, Subsequent removal is effected by filteringthrough a tared Gooch crucible, the bottom of which iscovered by an asbestos mat 0 During the separation of 21asphalts (12), Kleinschmidt observed that he could generallypredict the relative order of failure of these samples inan accelerated cycle by arranging them according to thetime necessary for filtration, those taking the least time.failing most rapidly,
A quantitative method to measure this filtration rate wasdeveloped with the aid of a pressure filter designed bythe Johns-Manville Research Laboratories, The instrumentwas essentially an all metal cylinder having a fitted, re-movable stopcock assembly at the bottom so that a Whatman#50 paper filter disc could be inserted and a fitted caphaving a lead-in tube so that a suitable inert gas couldbe introduced for increasing the pressure. The latter wasregulated by a simple manostat in series with a manometer.
- 5 -
The general procedure employed was as follows?
Ten ml. of a benzene solution having the desired weightconcentration of asphalt was pipetted into 90 ml 0 ofn-pentane previously measured into a suitable glass bottle 0
After swirling,the bottle was stoppered and the system was
allowed to stand for 20 hours at room temperature
.
The mixture was again swirled. Timed with a stopwatch., theensuing 90 seconds were used to transfer the sample into thepressure filter tube, fitting the cap into place and ele-vating the pressure to one p.s.i, using nitrogen gas forthis purpose.
The stopcock was opened allowing the filtrate to flow intoa suitable graduated cylinder. The times required forsuccessive 5 ml, volumes to flow were recorded.
The filtration rate was obtained as follows?
The flow rate was found to follow the expression V 2 = KTfairly closely, where V = volume of filtrate in ml. andT = time in minutes. Taking the logarithm of both sidesand rearrangement of the result yielded
In V = 1/2 In T + 1/2 In K.
Consequently, volume was plotted against time on logarithmicgraph paper, A line having the slope = 1/2 was fitted to theexperimental points and extrapolated to T = 1. The valueof V thus obtained, when squared, evaluated K according tothe above expression.
Two values of K were obtained for each asphalt. The firstwas derived employing a 10$ solution of each asphalt inbenzene. A second filtration rate, designated Ks
,was de-
termined in which the amount of asphaltenes precipitatedwas calculated to be the same for all samples. The levelarbitrarily chosen was that amount of asphaltenes obtainedwhen an aliquot of the 10$ benzene solution of the asphalthaving the lowest initial asphaltene concentration was used.
- 6 -
2 0 6 Durability by Accelerated Weathering
Since the primary standard employed in this study was theweatherometer test, every reasonable precaution was taken toobtain reliable ratings 0 Five replicate specimens of eachasphalt were cast in uniform films of 25 mils ±1 mil on6- x 2-3/4- in„ aluminum panels (7)° Essentially these wereexposed to accelerated conditions as proposed by A 0 S o T o M o
Method D529-39To To offset possible differences in thecarbon arc machines, two specimens of each asphalt wereexposed in one weatherometer and the remaining three inanother
o
The 51-9C cycle, consisting of 51 minutes of dry light andheat per hour followed by 9 minutes of light and cold (40°Fo )
water spray, was employed,,
A maximum panel temperature, 144° ±2°F,,was attained in
each machine o The variation in coating temperatures duringeach cycle was comparable.
Failure determinations were made by obtaining spark photo-graphs using the high voltage crack detector technique (8,9) The coating was removed as a final failure when thephotograph showed that at least 5
0
% of the specimen ! s areahad cracks.
The specimens were inspected regularly twice each week, morefrequently when failure appeared to be imminent,, The in-spections were standardized as follows?
At the end of 51 minutes of dry light and heat, the specimenswere removed, permitted to cool to room temperature and in-spected preliminarily. Those coatings which showed pronouncedsparking were put aside for further evaluation. Twenty min-utes after they were removed from the machine, spark photo-graphs of these specimens were made, The failed coatingswere removed and the time to failure was recorded..
- 7 -
2o7 Hate of Change of Components
A primary separation of the asphalts was obtained bychromatographic analysis (11) 0 This consisted of filter-ing off the n-pentane insolubles (asphaltenes
)
5and
further separating the solubles (maltenes) into whiteoils, dark oils and resins by absorbing them on activatedFuller's earth in a chromatographic column and elutingwith increasingly polar solvents, namely, n-pentane,methylene chloride and methyl ethyl ketone.
Two modifications of the procedure cited were mades
(1) The Fuller's earth was activated at l4o°for 18-20 hours.
(2) A volume of 250 ml, of each solvent was em-ployed to obtain successive fractions,.
An individual specimen of each asphalt was fractionatedbefore exposure, at 200 hours, at a second estimatedintermediate point and at final failure „ Thus, changesin every component with time could be followed „ Theaverage rate of change of each desired constituent wasobtained by dividing the total change by the time ofexposure »
2,8 Loss in Weight
Data for this study were obtained by weighing the repli-cate specimens of each asphalt at approximately 200-hr,intervals and computing their average. Since this is asurface phenomenon, actual losses in weight and not per-centages were compared since the surface area of eachspecimen was the same. Similar to the constituent changestudy, loss in weight for each asphalt was plotted againsttime of exposure. Average rate of loss in weight was com-puted by dividing the total loss by its durability.
3* RESULTS AND DISCUSSION
3.1 Rate of Filtration
The softening points, penetrations, rates of filtrationat two concentrations and the durabilities for the 12asphalts are presented in Table 1. For ease of comparisonthe listing appears in the order of increasing durability,,It is immediately evident that, except for a general trend,a good correlation does not exist between the rate of fil-tration at either concentration and the durability of theasphalt* It should be borne in mind that the conditionsfor this determination were selected on the basis of alimited study of the effects of varying the concentrationof the benzene solution of the asphalt and settling periodof the precipitate after transfer to the pressure filter.They constitute a compromise designed to minimize erraticresults and compression of differences among the asphaltsinduced by lower concentrations while at the same timeoffsetting inordinate running times and similar com-pressive effects brought about by longer settling periods*It is conceivable that an extended study of these variableswould indicate other conditions to be more favorable forthe measurement of this property* The method is simplewhile the reproducibility of duplicate determinations is
±3f*.
However, changes in constitutents and losses in weightstudies were favored because of the promising nature ofthe results obtained*
3.2 Changes in Components
The fractions obtained with the separation employed wereasphaltenes, while oils, dark oils and resins. As eachasphalt degraded during exposure, the overall patternwas quite similar; asphaltenes and resins increased andlosses in weight became evident as the dark and white oilswere depleted* Thus, it might be expected that the rateof change of one or more of these fractions would be re-lated to durability* A previous report on 20 asphalts had
O I
1
o cd !
> PI< fa !
O »
I
i
>>cd
>v'
g\
W !
I
in I
o O 1
O -P I
m v i
fa cd i
02 fa i
i
i
i
! fa 1
O- O UN nO 00 On O ON CM O UNCM rO rO pO rO rO -U Itn lOv N O (>
N 00 O nO O M3 ON CO.fa- CM VO. nO
o o o' o o o o o o o ° °
[>_ + j- Un On O- r—l J- CO l>- PO OnUN U\ Un O- J- J- ro PO ro fMJ- W
O O CO OO H CM 'O CM.M H, UNOOOOOOO oooooo
CK O rlj- OJ- PO^UNONPOP.-j-vOUNO-mJ- roj- cn POJ- J-
00 \D CM O UN CO UN UN UN H r-1 oo
H OCMOCTnCO On O ON nQ OO 1>-
o 0 OOOO OOOOOOrH i—IrMs—IOO OHOOOO
O- OO CO O'. H N rH ON rH ^ H PO,—|
,—I,—ii—ICMi—ICM i—| CM CM CM CM
o•H
1 fa !
So A fa- J
-
CM PO UN CM UN CM CM ON o- oo
-P I CM 1 i—
!
!—
1
i
—1 i
—1 i
—1 i
—1 i
—1 i
—1 i
—1 I
—1 I—
{
i
—1
cd 1 rO!p 1 1
p I 1
a) 1 l
Pi 1 !
a> ) D I
1 UN! fa- pO fa- CM UN, Cn UN CM CM ro far \Q
1 i
—1 I PO pO ro PO PO CM PO PO PO PO PO PO
1 i—! I
I
i
1
o fQ !
£L„ 1 CM co O- i
—1 far PO PO CM CM PO t>- o
cfe! s j~Tj
rO !1CM far CM PO CM CM CM CM o CM
o 8 o CM CM CM CM CM CM CM CM CM CM CM CM
02 pc; i
i
fl
1
n cd cd0
|h-
1
a a cd
_p \ M^ H cd M cd srH 8
O H P5 M >> CP •H ocd i P-Prl P CP o hs Pi cd m fa
& i •H cd i
—1•H O o O O O cn H cd
CM fa r 'i a> •H 1—
1
txo cd W) o Pi I
—
tn s £3 <N- c cd cd •H cd o cd O fa
< s <q 02 <3 to EH fa EH fa 02 W fa o
- 9 -
shown a good correlation to exist between acceleratedweathering and (1) the average rate of change of asphaltenes,(2) the average of rate of change of total oils (white plusdark oils), (3) the average rate of change of asphaltenesplus weight loss (10)„ These conclusions have been re-affirmed in the present study 0 Figures 1, 2 and 3 show therelationships.. In addition, the average rate of change indark oils also correlated well with weather resistance(Figure 4)„
In order to determine whether these data could be trans-lated into a practical, reliable method for predictingdurability, it was necessary to establish whether thesame relative order of change was maintained in eachasphalt during the early periods of exposure 0 The datacompiled for this purpose are shown in Table 2 0 Thus,the change in asphaltenes, white oils, dark oils, resinsand weight loss of each asphalt was followed in themanner illustrated by Figures 6 and 7 Tor three of thesampleSo A direct graphical comparison of all asphaltenecomponent changes with time established that the samerelative order of change was not maintained throughoutthe exposure (Figure 8;„ A similar study of total oilchange during exposure for each asphalt likewise showedthat an interchange of relative position took place whichwas different from that obtained by comparing the calcu-lated average rates of change,, Consequently, predictionsbased on early rates of change of these constituents couldlead to serious discrepancies,
3o 3 Loss in Weight
Losses in weight data were analyzed in an identical mannerto those involving changes in components. Thus Figure 9showed a good correlation with durability by acceleratedweathering. Additionally, the loss for each asphalt duringthe early periods was nearly linear with time. Figure 10indicates that the relative position assumed by eachsample could be attributed to the length of time elapsedbefore it actually started to show a loss, i 0 e„, itsinduction period, in addition to its difference in slope(rate). The loss in weight of each asphalt after 300
po i
j>sl OJ
p iI
P 1 pi0) 1 H-\D rOOO O 1 1 Q3 1 O-O-CM ft-lr\ | | 031 PO P ONlTN I 1 |
> 1 o o o o o j 1 > 1 O O O O O I 1 >1 o o 0 0 ! I 1
O I O OnOnOOn 1 1 O 1 ON ON O On ON 1 1 Ol OOONON 1 1 1
O 1 O 0NONONON 1 1 O 1 ON ON O ON ON I ! Ol CO O On On l l l
CD 1 i—
i
03 1 i—
1
031 i—
1
ft 1
1
1
ft 1
1
1
ftl1
1
1
1
CO 1 ft-
1
1
CO 1 oI
1
CO 1 ITN00 OO ON0 CO 1 ft- p roft- ft
-ft
-O CO
I ft-ft o o o o o CO 1 00 1—1o o o O
-P O 1 O O O O O ('V') ft O I O o o O O O pP) -P Ol O o ° O O O PO^ ft i
i
i
PO00 ONONON o 35 ft 1
1
1
C\J CO ON ON ON © :s fti1
1
CM [ft i—1 i—1 i—1o
i
i
ft i
1
1
ft 1
1
1
P4ft i ft ! ftl
£ i i—1 i—. O O l l I ft i CM O O P 1 1 1 ftl i—1 i—1 O i—II 1 l
cd i O O 0 O 1 1 1 cd i O o o o 1 | 1 cd o O O 0 I 1 1
03 1 O O O O l l 1 03 1 O O O O 1 1 1 0)1 O O O O l 1 l
i—l i1—1 1 i—1
1
O 1
1
1
O 1
i
i
ol1
1
1
1
co i
i
i
CO 1
1
1
CO!
ft 1 OrOP pOpOpO 1 ft 1 ftl
•rH 1O O O O O O 1 •H 1 PNOCO ONCO ft- 1 •H
1
OONPCM pOpO 1
CO 1 ONo OP P CM I CO 1O O O O O O 1 CO! O 0 O O o O 1
o 03 11—1
1—11—1 1 0) 1 00 ON ON ON ONp I 03 I On O i
—
1 i—1 i—1 c\j 1
C\J ft I
1
ft i
i
ftl1
i—
\
r—1 i—1 i—1 l
[ft 1 i 1
Pi 1
1
i
i
1
<] ft co i CM nO ft- CO NO nO On ft C0 1 Oft- ONONO-POO ft CO! PO [ft ON o O POOEH ft p 1 o o o o o o t>- p 1—1 1 O O O 0 0 o 1
1 P i—1
1
O O O C O O OOcd ft I O ONNC ft-ft- UOlT\ cd P i NO ft- pP) PO PO CM J- cd ft i IftCO i-TNft- ft- PO POQ o I
1
1
POt—11—1
1—11—1 l—1
° Q O i
1
1
CM i—1 i—1 i—1 i—1 i—1o ft Ol
I
!
CM i—1 i—1 i—! i—1 i—1o
1
1
03 1
1
l
03 1
1
1
03 1
ft CO 1 CO P ItnC IrNPOO ft CO I o-\o cm cm ft- popo -P C0I [ft O ft ft- CM ITNCMft 1—1 1 o o o o o o [\. •H i—! 1 0 O 0 O O 0 ft- •H i—1
1
O O O O 0 0 J-
ft ft 1 QN-nO pO pO CM ft- CM ft P 1 ITNCM OOOCO O' CM ft -HI P ONNO POPO00 cm§ O I
1
!
!1
11
1!
!1
11
o ^ O 1
1
1
CM CM CM i—1 i—1o 5 O)
I
1
CM i
—
1 i—1 i—1 i—1o
I
1
03 1
!
1
03 1
I
I
031
ft 1 ft 1 ftl
03 1 03 1 031
ft 1 PO00 CM ft- P 00 o ft 1 O' CM CM nO nO On O' -Pi CM MD Ift-POCM O (ft
i—! 1 O © O O O O 03 i—1 1 o o o o o o ON i—1
1
o o © o o o 'Lf'N
03 1 P ON CM P CM Oft- cd ! ON 0-00 00 CO 00 CM cdi H00 OnO O ON CMft 1 ft-ft- IftlTNlrNp O ft 1 COJ- ft- ft- ft- ° ftl ft- ft- ft 1XNUA o
ft 1 ftl Q4CO CO ! CO i (0!
>s ft i < i co ftlcd 1 i >s i
« 1 CO i cd 1
1 >s i ft 1
O- 1 cd i 1
CM 1 [>s Q i Os ITN 1 ftft 1 cd ft i cd PO -PI cd
1 £ i Q O ft i (ft ftl ft0) 1 * \ CO 03 1 * \ 1 0)1 * ft
ft ft i o o o o o 0) CD ft 1 O o o o e e ftl O 0 O O 0 CL) CDM O 1 in m m w in txo to 1 O 1 co c/3 c/3 c/3 c/3 txo txO P Ol C/3 CO cn 03 CO tuO Wft 1 P P p p p a Sh ftl p p p p p ft ft 04 P P P P P ft ft
EH a i Ift ft ft ft ft cd 5 ft a i ft ft ft ft ft cd cd P ai ft ft ft ft ft Cd cd
PI O 1 ft ft ft O t ft ft P Ol -ft -ft
pq O 1 OO CO iTNft- O O tvi O 1 O ONO 0-0 o o ft ol O O OO P o O Op1 CM lr\co ON m
1 ON O-lrNNO ft1 CM UMfNtft
<3 ^ 1 CM ft- IfNlTN^?^ ft ^1 P ItnnOnO^^ <3 Mftl CM ft ft- ftOjR^
c/3
•Hco
>sftrtS
ft
03
i—
I
cd
o•HftPhcd
ft
tcO
aoft
ft
13(D
ft
•H03
-PftO
03
ft
ft
ft'i—
I
cd
cm
cd
ft
•Hcm
-Pcd
ft
o•H-p•HCO
oftaoo*
TABLE
2„
(CONTINUED)
cm
Q
>jl >dPI PI PiCD 1 PnCM CM 0-0 l 1 CD 1 CO nonOONOO 1 l CD 1 nO O CO H On 1 1
J> 10 O O O O 1 1 |> | O 0 o o O I 1 £> 1 0 0 0 0 0 | |
Ol ONOOONO 1 * Ol ON ON ON ONON 1 1 Ol ONO ONOCO l l
Ol a\0 O ONO 1 1 O 1 ON ON ON ON ON 1 1 Ol ONO ONO ON 1 1
CL) ! i—1 i—1 i—1 I 1 CD 1 CD 1 H H IIPh 1
1
1
Ph I
1
|
ppi1
11
1
1
1
1
I
1 ONCO 1 00 CMN\D\DCM CO! H H CM COI ONp- 0-I3CN.P-
c CO 1 o o o o o CM o CO 1 o o o o o QN 0 coi 00000 CM-P Ol OCMCOOHHrO -P Ol OCMnOHHHCM -P Ol OHOOCOOnOn 0
5 pi i—1 i—1 i—! o
1
1
3 P 1 i—1 i—1 i—1o
1
1
13 Pii
1
1
I
CM
1
1
ft!
1
1
PHPI P 1 PIn 1 1 1 1 Cl p- CM CM H I 1 I Pi no O CM H 1 I 1
Cti 1 0 O O O I 1 1 CC3 1 O 0 o o | II cdl 0 0 0 0 1 1 1
ol O O O O 1 1 1 CD l O O O O l l l CD! O O O O 1 1 I
HI i—1
1
1—
! 1
Ol1
1
Ol1 1
011
1
1
1
CO 1
1
1
co i
1
1
COI
pi roOCOvO lr\CM l Pi Pi•rH | o o o o o o | •H 1 IfN CM ON\0 IfNO 1 HI CM CM CM 0000 NO 1
CO! CO H O O O CM I CO ! O O O O O 0 1 CO | 0 0 0 0 0 0 |
CD 1 i—1 i—1 i—1 i—1 1 CD 1 IfNOO O-O-O-CM 1 CD 1 Cn. OnO ON ON CM 1
PPI1
I
PhII
1
pH 1 H1
1
I
1
P Ol CM lr\H vO \D vO O1 1
1
P COIOOnOCMONCMNOCM
1
1
Pi coi O H no On CM CO COpi—1| oooooo IfH P 1
—1 1 oooooo no P 1
—1 | 0 0 0 0 0 0 CM
o3 HI VO ONlOvJ- POCM nn oi-HI O no ON O-CO CM no cd HI OO CM nO UnIcnCM noQ Ol CMi—li—li—li—li—1
o
1
1
p O 1 nO CM i—1 i—1 i—1 i—!o
1
1
p Ol CM CM 1—1
1—11—1
1—10
1
1
1
1
CD I
1
1
CD 1
1
1
CD 1
-P co 1 H On no On CN,p- H -P CO 1 CO oo ON ON H CVnO -P coi 0-0 ITNHnO 1—ICn,
•rHi—1 1
oooooo \D •l
—
1 i—! IOOOOOO O- •1—
1 ! |l OOOOOO U~\
P H 1 p- ON P-p- p- ON CM p H 1 H Cn. Cn.p- PNnOi—
I
PH! p- ft- OnO CO nO H5 0 1 CM i—1 i—1 i—1 i—1 °
I
1
,3 O 1 CM i—1 i—1 i—1 i—1o
1
1
3 OP 1 CM CM 1—i CM 1—[0
1
1
1
1
CD!
1
1
CD 1
I
1
0)1
Pi Cl PiCD 1 CD 1 CD!
-PI COONOCOvDCOJ- PU-J-UNO ONUN H -PI p CO CM IrwO CM OnI—
1 1 O 0 0 0 o op" I—j | oooooo CN. co
—
1
1
oooooo CfN
o3 t o NO CO CO ONCO CM Cdl H Cn. 0-00 O-vO H lo Cdl ONCMUNUMfN\D hini P" Jr P~ P" P" ° P 1
p- p- p- P* P* 0 cd Pi nOp-ft-ft-ft" 0
04 04 P ftco i COI COI
<dt <4 1 ON PiI I no i
I CO l 1
I l 1 i
1 03 l 1
1 Q l H 1
-PI cc3 -Pi cd -Pi cd
Pi p CO £1 p cn Pi PCD 1 * \ no CD 1 * \ < CDI * \n o o 0 0 o e e n 0 0 0 0 0 e e p p! 0 0 0 0 0 CD CD
Ol co co co co co bo bC l Ol CO CO CO CO CO bO tuO ft Ol CO CO CO CO CO bO bOSP p p p p p p p 04 P P P P P P P H ft P P P P P p pai WKKKK CCS cc3 O aippppppp P aipppppppOl Pi P o Ol P p P 01 p pol O ON CM VfN CM o O p 0
1
O O H UnnO 0 O 03 Ol OONlfNONp-OOI OnO-CM On 1 O NCvro <3 1 ONp- \D lT\
H ItnO- CN-^^ EH MR.I CM p* CO CO P 'SSJ H tN-CN.00^-^
co
•Hco
>5rH03
a03
03
O•HPP03
PbO
aoPh
Ph
OCP
P•H03
-PPo
Cl)
Ph
Pr—
I
•H03
Ph
03
P•HPh
-Po3
Ph
o•H-P•Hin
oPuaoo*
TABLE
2.
(CONTINUED)
pO
i
co
>icd
QCMft"
D•"3
ftHEh
>d PSPI Pi PICU 1 (—
1
nO \Q O- O- 1 1 CUI nOnOUnUnpo 1 1 CUI NO rHOOft-ft- 1 1
P | O O © 0 0 1 1 N* 1 o o o o o | I >1 O 0 O O O 1 1
oi o cn-<j\onon i i Ol OO On £Jn OnOn 1 1 Ol CO GNONON0O 1 1
Ol 1 1 Ol OnOnOnOON | | Ol ON ON On On On 1 1
CU 1 H CUI (Ul 1 1
odi1
1
cdii
i
Pd'i
i
1
1
CO | OCMtNOOOOi
i
COI rONOHUNUNOi
i
COI nOOnOpOpOUn© CO 1 o o o a o pO o CO 1 0 © © 0 0 1
1o CO 1 0 O O O 0
4-5 Ol O H CO On O O CM -P Ol OHCOOOOCM -P Ol Q Oft- rH O O rH3S (ft 1 I—1
1—1°
1
1
5 pl 11
1—11—1
o
1
1
!s fti i—1
1—1 i—io
i
1
1
ft
1
1
ft
i
i
ftft ft 1 ftCdl PO CM 1 1 1 Cdl t>-UN POft" | | i cdi cono cn-un i i i
Cdl e o o o | I | Cd 1o o o o | | | Cdl o 0 0 o | | |
0)1 O O O O 1 1 1 CUI O O O O 1 1 1 CUI O O O O l ! l
1—II1—1
1
i—ll
ol1
1
oi1
1
oi1
1
1
1
co l
1
1
COI
1
1
coi
cdi cdi cdi
•HI i—1 i—1 i—1 PO i—1 O 1 •HI NOOCMrnUNON 1 •HI UnO-O-CO pOCO l
CO |O O O O O O 1 CO 1 O O O O O O 1 m 1 o o o o o o J
(Ul CN- On OnO O PO 1 CU 1 CO O i—1 i—1 i—1 CM | CUI CO o ONO H CM 1
Pdl i—1 i—1 1
1
1
od i i—1
1—1
1—1
1—i i
1
1
pd i i—i i—11—i i
i
i
1
1
fti ft 00 H O-nO ft" ft" nO
1
1
ft COI nO o O OO Un
i
—1 CM
i
i
ft coi ft- nO no CM Oft" t>-
H I—1| o © o © o o ON Pi—II 0 © 0 0 o o O p 1—II 0 o O O 0 O CMcd -HI O CvJ O C^co CM CVJ cd •Ht' CM lAONlNINUNrO cd-HI rH CM H OO CO rO CM
Q Ol mCM CM r—1 H rH o
1
1
ft O | ro CM i—1 i—1 i—1 i—1o
1
1
ft 0
1
pO CM CM i—1 i—1 i—1o
1
1
1
CU 1
1
1
CU 1
1
1
CU 1
-P COI CN-CO ft" ft- ft" POft" 40 co I iNOCMOO O-ft- 4-0 CO! o co NO UN.CO cm Un•H 1—It O O O 0 O c Dn •H l—1 1 o o o o o o QN •H i—II 0 O 0 o o o Oft -HI pO OnnO C^nO Cn-H ft -HI ONHNOUNUNft-O ft -HI CM CM OnUnUwO rHiS 04 CM rH rH rH rH ®
1
1
3» Oli—1 CM i—1 i—1 i—1o
1
1
,3 Ol CM CM i—1 i—1 i—1o
1
1
1
1
CDI
1
1
CUI
1
1
CUI
cdi cdi cdi
CDI cut CUI
-PI rH CO H IfNCO O CO -P 1 O co CM ONCO co NO -PI ONCOvOft- OHOrHI o o o « a e \Q >> rH 1 © o © o o o UP\ |—1 1 o o o o o o C\J
Cdl CO ft- UNft- ft" NO H cd Cdl H ft" ft" ft" l>-
H
cdl lAHrom'mNHfti roft- ft- ft- ft* ° Q ft 1 POft" ft" ft" ft" ° ft! POft" ft" ft" ft" o
ft ft ftCOI O COI coi
fti1
UN fti1 if)
ftl1
1
1 1
1
1 >>1
1
1 1 cd 1
1 H 1 Q 1
1 >1 H l Pn 1 rS-pi cd -PI cd ON -Pi cd
cdi a CQ cdi * « UN. Cdl * QCUI * \ ft CU 1 o o CUI O O \
o © © o a Q) Q) ft n t> o o s s e e 1 Cdl e © o CO CO <U CU
Oi in in in in in to ft Ol CO CO CO p p tlO b£ Ol W CO to p p MMft Cnppppcdcd H ft p p p pd Pd sd sd rH ft ppppdtncdcdaiudaasdMcdcd ai ft ft ft cd cd S at Pd Pd Pd cd cd
oi ft ft oi ono ft ft o Ol NOOO ft ftoi O CM NO OvJ- o O O oi oocMmooo O oi OOOUNONOO
1 O N0 UN CM ft 1 Oft" O rH O 1 O O-POCMCM nD 00 0^.^ ft co
co
•HCO
r—
1
Cd
acd
cd
o•Hftftcd
PCxO
aop<H
CU
•Hcd-pftO
CU
pftr—
1
•Hcd
cd
£•H<H
-Pcd
cd
o•H-P•HCO
Oftaoo*
X-
CvJ
9
K^l >»lPI p 1 picd i lax- no c\j cm i i CD 1 CM v0 C O H 1 1 cd I 00 NroiaO i i
f I>| o c e o O 1 1 i> 1 0 0 e • Q 1 | 1 O Q O 0 O | 1
O I 00 CN CN (N<N 1 1 O l CNOO OO O I l Ol 00 NCO CNCN I 1
CM CN <N (N OQN 1 1 O 1 OOOO O 1 I Ol CMN>OM> 1 1
CD 11 0)1 rH 1 1 CD 1
asl1
1
t
i
«j
1
asii
i
1
1
CO l nOCM CM CM \D
1
1
co l O CO NOOOO no
i
i
to l CMX" NO O CNo to 1
O 0 c o <o 00 p CO| o c o o o C to 1 0 O 0 o o
-P o i o O NX* POJ- rH •p q i o o mmH -P Ol OON-X-N)\OHIS i-5l H H H °
l
1
U M 1 Hi—1 i—1O
1
1
IS iX 1 i—! i—1 i—1o
1
1
1
1
ai
1
1
at
1
1api p i piPi X- lacM X* i I 1 p 1 X INM0X- 1 1 1 Pl (N00 CN IN 1 1 1
cd 1 O o o oI 1 I Pi o o o o i i i Pi o o o o i i i
CD I O O O O I l l CD 1 O O O O l l 1 CD 1 O O O O l 1 l
i—1
1
1—1 1 i—1
1
OI1
1
O 1
1
1
oi1
1
1
1
CO l
1
1
CO 1
1
1
co i
Pi P l Pi•hi noX- co ItsNX-
l •HI CM laoo X" Mo no 1 •Hi O CM noO <N <N 1
C0 1 o o 0 o o o | W |o o o O O 0 1 Ifl 1 O O 0 O O O 1
CD 1 OO O 00 (NCNH 1 CD 1 INOOCO O OCM 1 CD 1 00 CNOO H O CM 1
«l H1
1
as i h1
1
PP 1 i—1 i—
1
1
1
1
l
XI co l O- on 0-00 o NvO1
1
X co | CM X" O CM la IN CM
1
1
XS to 1 NX- H 00 CM Da CMp (
1 1 C O 0 C 0 P O- pi—1| ococoo Do P 1 II 0 0 O 0 O OJ-P -H 1 00 nO CMO'O OJ H PHI OJ \D nOOO 00 no H P *H 1 (NX* CM \D \0 no HQ Ol C\l C\l H i—
I
iHiH °
1
1
Q O 1 no CM CM H H H =
1
1
Q Oi CM CM CM i—1 H i—1°
1
!
1
1
CD 1
1
1
<D 1
1
1
CD 1
-P CO 1 CNNHnONCMOO -P co 1 MD CO laOO CM X- no -P co(X-HDCMOOnOHX)•p-| |
1 I O 0 0 0 O O CM •H H 1 O C O O O o QN •H 1—1 1 O O O O O 0 OX -HI la CM OMO'vOOrH X H 1 larOHvO NC0 O X -HI X- nocox-x- O H5 Ol CM CM CM rH H p
1
1
|S O 1 OJ OJ CM H H1
3 Ol CMOJi—If—1 rl i—1o
1
1
1
1
CD 1
1
1
CD 1
1
1
CD 1
Pi P 1 PlCD 1 CD 1 CD I
-Pi CM SO no Opt- 00 CO -PI vX CM X" laH la CM -Pi 00 lax> noxioo H|
—
| | 0 0 0 c 0 0 O H 1 0 0 0 9 0 0 N- pH 1 p o o o o o sQPi indnomno^H p i moo OOMD o p i Da. CN i—1 i—I i—1 laOX i nOX" X" X" ,X p X I nonox- nox- X 1 no COX' X-X" °
ai co ai P4CO 1 CO 1 co to 1
<\ P «J 1 N hSiCO 1 « 1 P 1
N 1 1 Q i
cd 1 O 1 i
Q 1 cn 1 Da i
i>s 1 CN 1 NC\J -Pi P 1 -p 1 p -PI PN til * Q d i * q l di * q
CD 1 o c \ < CD 1 o o v— CP 1 O O 0 \1 Pi » » o W t/H) (1) p j eot>C0C0<D<D < Pl p oCOCOCOCDCd'
Ol to (0 (0 p p UD h.0 Ol CO co CO p p h£) bd S Ol cocopppbflboC/3 ai p p p m tc p p H ai pppasasPP o a ppasasasdp< at as as as p P CO a i as as as p p ai as as p p03 oi x-x- -P XJ H O 1 H o X X 33 Ol CM'X o X Xs oi OX- H IN00 o O to O 1 O CM CNOO o O Ol OX- NX- CNO O<c 1 00 H^0 la o i o^-o o on 2 1 OOOO2 id ^.1 OJ VO CM H^.^ o ^1 a H H CM
W•HCO
N>r—
I
PPcd
cd
o•HXacd
Pb£)
aop<H
T3a)
P•Hcd
-pXo
CD
PPr—
I
•Hcd
<H
cd
P•H
-Pcd
ao•H
•HCO
Oaaoo*
10
hours of weathering was obtained from this graph andplotted against its durability*, The result is shown inFigure 11 which may now be employed as a calibrationcurve to predict durabilities of other asphalts if theloss at 300 hours is known*,
This development is entirely consistent with the factsknown about the general degradative pattern in asphaltand to a limited extent elucidates the role of oils andasphaltenes with respect to durability,, Specif ically
,
asphalt degrades under the influence of heat and ultra-violet light, the former leading predominantly to anincrease in asphaltenes, the latter to oxygenated, waterextractable and volatile degradation products,, Both ofthese general reactions result in the depletion of thetotal oils,, The data in Table 1 show that the asphalteneincrease had either ceased or tapered to a nominal valuewell before the coating had weathered to final failure,,Evidently, then, the controlling reaction was the light-induced one which continued to deplete the availableoils to a level sufficiently low so that the crackedcoating could no longer heal itself under thermalinfluence,, Hence, the faster the rate of this reaction,the more rapidly did the coating attain final failure,,It appears that the weight loss obtained after 200-300hours of exposure was an effective measure of the rela-tive rates of this reaction for the asphalts studied,,
Those asphalts having the greater durability had thelonger induction period, the slower rate of loss inweight and lost weight linearly throughout the exposurecycle,, The less durable asphalts had extremely shortinduction periods, the greater rate of loss in weightand evidenced more deviation from linear loss during thedetermination of their durability. The latter effectwas apparently a result of such a rapid depletion of thereactants that the amount made available by the coatingfor continuation of this surface phenomena diminished witht ime 0
- 11 -
The length of the induction period was not determinedquantitatively for each asphalt . However, one of theless durable asphalts required only forty hours of exposurebefore it lost weight while a more durable coating re-quired 160 hours under the same conditions* Further workon this phase should prove of great interest*
4* CONCLUSIONS
The rate of filtration as determined under the conditionsdescribed in this report did not correlate strictly withdurability although it did distinguish between the lessdurable and the more durable asphalts*
The average rate of change of total oils or dark oils orasphaltenes correlated well with accelerated durability*However, these constituent changes could not be employedas criteria for prediction of durability because theydid not change comparably In every asphalt during exposure*
The average rate of loss in weight correlated well withdurability by accelerated weathering* Moreover, the lossin weight was nearly linear with time during the firstseveral hundred hours of exposure* Determination of theloss in weight at 300 hours appears to afford a simple,reliable method for the prediction of durability of acoating grade asphalt*
An induction period, during which no loss in weight occurs,apparently furnishes a means for determining the relativepositions of the loss in weight curves for each asphaltin a series. Further study of this phenomenon isindicated *
12
5„ REFERENCES
(1) V. Vojtech, "Light Action on Asphalts", J. Soc. Chem 0
Ind„ ,
654 (1906)o
(2) Errera, J.,"Light Sensitivity of Asphalts"
,Trans,
Farado Soc., 314-17 (1923).
(3) Strieter, 0 o G.,"Accelerated Tests of Asphalt", J 0
Reso NBS 247-253 (Aug. 1930), RP197*
(4) Kolb, W. C.,"The Characteristics of the Carbon Arc.
How the Properties Vary with Voltage and Current",Electrical Engineering 53, 1173-9 (193*+) , 56, 319-24(1937)<.
(5) Weetman, B.,"Accelerated Weathering of Bituminous
Materials - Operating Variables", Proc. A.S.T.M. 43 .
1154-64 (1943)o
(6) Kleinschmid t ,L. R. and Greenfeld, S. H.
,"Influence
of Exposure Conditions on the Accelerated DurabilityTesting of Asphalt", A.S.T.Mo Bulletin No. 213 (April1956)o
(7) Greenfeld, S a H.,"A Method of Preparing Uniform Films
of Bituminous Materials", A 0 S 0 T 0 M 0 Bulletin No 0 193,50-2 (Oct. 1953)o
(8) "The Design and Application of a Spark-Gap Instrumentfor Detecting Crack Failures of Asphalt CoatingsDuring Weathering Tests", (issued as A.S.T.M. STPNo. 94) Sympo on Accelerated Durability Testing ofBituminous Materials, American Society for TestingMaterials, p. 153 (1949).
(9) Hunter, Jo B,,Gzemski, F. C. and Laskaris, X.
,"A
New Method for Evaluating Failure of BituminousMaterials Due to Weathering", Symp G on Acc, DurabilityTesting of Bit* Materials, American Society for Test-ing Materials, p 0 144 (1949) (Issued as A.S,T.M, STPNo. 94)o
- 13 -
(10) Falzone, J„ P„,"Relation of Rate of Component
Changes in Asphalts to Accelerated Durability",N 0 B 0 S 0 Report No. 5935 (June 20, 1958)o
(11) Kleinschmidt,
L 0 R„,"Chromatographic Method for
the Fractionation of Asphalts Into DistinctiveGroups of Components", J„ Res„ NBS
, 163-166(1955).
(12) Greenfeld, S 0 H.,"Report on the Evaluation of 21
Coating-Grade Roofing Asphalts", N.B.S. Report No„4732 (July 1, 1956).
AVERAGE
RATE
OF
ASPHALTENE
CHANGE
VS.
ACCELERATED
DURABILITY
o O o O Oo o o O O
ro CM6
AVQ d3d 39NVH3 %
DURABILITY,
DAYS
(5I-9C)
AVERAGE
RATE
OF
CHANGE
OF
TOTAL
OILS
VS.
DURABILITY
oo
ocr>
o00
o
oCD
om
ovi*
orO
AVO d3d 39NVH0 %
DURABILITY,
DAYS
(51
-SC)
AVERAGE
RATE
OF
CHANGE
OF
ASPHALTENES
-5-
LOSS
IN
WEIGHT
VS.
DURABILITY
oo
o
o£0
ON
O£0
o10
o
o[O
AVO H3d 39NVH0 %
DURABILITY,
DAYS
(5I-9C)
U. S. DEPARTMENT OF COMMERCELewis L. Strauss, Secretary
NATIONAL BUREAU OF STANDARDSA. V. Astiti, Director
THE NATIONAL ICUREAIT OE STANHA ItOSThe scope of activities of the National Bureau of Standards at its headquarters in Washington,
D. C., and its major laboratories in Boulder, Colo., is suggested in the following listing of the
divisions and sections engaged in technical work. In general, each section carries out specialized
research, development, and engineering in the field indicated by its title. A brief description of
the activities, and of the resultant publications, appears on the inside front cover.
WASHINGTON, O. C.
Electricity and Electronics. Resistance and Reactance. Electron Devices. Electrical In-
struments. Magnetic Measurements. Dielectrics. Engineering Electronics. Electronic Instru-
mentation. Electrochemistry.
Optics and Metrology. Photometry and Colorimetry. Optical Instruments. Photographic
Technology. Length. Engineering Metrology.
Heat. Temperature Physics. Thermodynamics. Cryogenic Physics. Rheology. Engine Fuels.
Free Radicals Research.
Atomic and Radiation Piiysics. Spectroscopy. Racliometry. Mass Spectrometry. Solid
State Physics. Electron Physics. Atomic Physics. Neutron Physics. Radiation Theory.
Radioactivity. X-rays. High Energy Radiation. Nucleonic Instrumentation. Radiological
Equipment. '
Chemistry. Organic Coatings. Surface Chemistry. Organic Chemistry. Analytical Chemistry.
Inorganic Chemistry. Electrodeposition. Molecular Structure and Properties of Gases. Physical
Chemistry. Thermochemistry. Spectrochemistry. Pure Substances.
Mechanics. Sound. Mechanical Instruments. Fluid Mechanics. Engineering Mechanics. Mass
and Scale. Capacity, Density, and Fluid Meters. Combustion Controls.
Organic and Eihroaas Materials. Rubber. Textiles. Paper. Leather. Testing and
Specifications. Polymer Structure. Plastics. Dental Research.
Metallurgy. Thermal Metallurgy. Chemical Metallurgy. Mechanical Metallurgy. Corrosion.
Metal Physics.
Mineral Products. Engineering Ceramics. Glass. Refractories. Enameled Metals. Concreting
Materials. Constitution and Microstructure.
Building Techmoingy. Structural Engineering. Fire Protection. Air Conditioning, Heating,
and Refrigeration. Floor, Roof, and Wall Coverings. Codes and Safety Standards. Heat Transfer.
Applied Mathematics. Numerical Analysis. Computation. Statistical Engineering. Mathe-
matical Physics.
Data Processing Systems. SEAC Engineering Group. Components and Techniques. Digital
Circuitry. Digital Systems. Anolog Systems. Application Engineering.
• Office of Basic Instrumentation. * Office of Weights and Measures.
BOULDER, COLORADOCryogenic Engineering. Cryogenic Equipment. Cryogenic Processes. Properties of Mate-
rials. Gas Liquefaction.
Radio Propagation Physics. Upper Atmosphere Research. Ionospheric Research. Regu-
lar Propagation Services. Sun-Earth Relationships. VHF Research. Ionospheric Communication
Systems.
Radio Propagation Engineering. Data Reduction Instrumentation. Modulation Systems.
Navigation Systems. Radio Noise. Tropospheric Measurements. Tropospheric Analysis. Radio
Systems Application Engineering. Radio-Meteorology.
Radio Standards. High Frequency Electrical Standards. Radio Broadcast Service. High
Frequency Impedance Standards. Electronic Calibration Center. Microwave Physics. MicrowaveCircuit Standards,
top related