&867206 7$5,)) 6&+('8/( l &kdswhu $57,&/(6 2) ,521 25 67 ... · &867206...
Post on 08-Aug-2020
0 Views
Preview:
TRANSCRIPT
CUSTOMS TARIFF - SCHEDULE
73 - i
Issued January 1, 2020
Chapter 73
ARTICLES OF IRON OR STEEL Notes
1. In this Chapter the expression "cast iron" applies to products obtained by casting in which iron predominates by weight over each of the other elements and which do not comply with the chemical composition of steel as defined in Note 1 (d) to Chapter 72.
2. In this Chapter the word "wire" means hot or cold-formed products of any cross-sectional shape, of which no cross-sectional
dimension exceeds 16 mm.
73 - 1
Issued July 1, 2020
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
73.01 Sheet piling of iron or steel, whether or not drilled, punched or made
from assembled elements; welded angles, shapes and sections, of iron
or steel.
7301.10.00 00 -Sheet piling TNE Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
7301.20.00 -Angles, shapes and sections Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Of a height not exceeding 635 mm ........................................................ TNE
20 - - - - -Of a height exceeding 635 mm .............................................................. TNE
73.02 Railway or tramway track construction material of iron or steel, the
following: rails, check-rails and rack rails, switch blades, crossing frogs,
point rods and other crossing pieces, sleepers (cross-ties), fish-plates,
chairs, chair wedges, sole plates (base plates), rail clips, bedplates, ties
and other material specialized for jointing or fixing rails.
7302.10.00 -Rails Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
- - - - -Heat treated:
11 - - - - - -Of a weight not exceeding 57 kg/m...................................................... KGM
12 - - - - - -Of a weight exceeding 57 kg/m but not exceeding 67 kg/m ................ KGM
13 - - - - - -Of a weight exceeding 67 kg/m............................................................ KGM
- - - - -Not heat treated:
21 - - - - - -Of a weight not exceeding 57 kg/m...................................................... KGM
22 - - - - - -Of a weight exceeding 57 kg/m............................................................ KGM
7302.30 -Switch blades, crossing frogs, point rods and other crossing pieces
7302.30.10 00 - - -For use with grooved or girder guard rail KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
Issued July 1, 2020
73 - 2
7302.30.90 00 - - -Other KGM 6.5% CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
GPT: 5%
7302.40.00 00 -Fish-plates and sole plates TNE Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7302.90.00 00 -Other KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7303.00.00 Tubes, pipes and hollow profiles, of cast iron. Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Soil pipes ................................................................................................ KGM
20 - - - - -Pressure pipes........................................................................................ KGM
90 - - - - -Other ...................................................................................................... KGM
73.04 Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron)
or steel.
-Line pipe of a kind used for oil or gas pipelines:
7304.11.00 00 - -Of stainless steel KGM Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
7304.19.00 - -Other Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
- - - - -Of an external diameter not exceeding 265 mm:
11 - - - - - -Of iron or non-alloy steel ...................................................................... KGM
12 - - - - - -Of alloy steel......................................................................................... KGM
- - - - -Of an external diameter exceeding 265 mm:
21 - - - - - -Of iron or non-alloy steel ...................................................................... KGM
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
73 - 3
Issued July 1, 2020
22 - - - - - -Of alloy steel ........................................................................................ KGM
-Casing, tubing and drill pipe, of a kind used in drilling for oil or gas:
7304.22.00 00 - -Drill pipe of stainless steel KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7304.23.00 - -Other drill pipe Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Of iron or non-alloy steel ........................................................................ KGM
20 - - - - -Of alloy steel .......................................................................................... KGM
7304.24.00 00 - -Other, of stainless steel KGM Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
7304.29.00 - -Other Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
- - - - -Casing, of an external diameter exceeding 114.3 mm but not exceeding
177.8 mm:
11 - - - - - -Of an A.P.I. grade H-40, J-55, K-55 or equivalent proprietary
specification ......................................................................................... KGM
19 - - - - - -Other .................................................................................................... KGM
- - - - -Casing, of an external diameter exceeding 177.8 mm but not exceeding
298.5 mm:
21 - - - - - -Of an A.P.I. grade H-40, J-55, K-55 or equivalent proprietary
specification ......................................................................................... KGM
29 - - - - - -Other .................................................................................................... KGM
- - - - -Casing, of an external diameter exceeding 298.5 mm:
31 - - - - - -Of an A.P.I. grade H-40, J-55, K-55 or equivalent proprietary
specification ......................................................................................... KGM
39 - - - - - -Other .................................................................................................... KGM
- - - - -Tubing, of an external diameter not exceeding 60.2 mm:
41 - - - - - -Of an A.P.I. grade H-40, J-55 or equivalent proprietary specification.. KGM
49 - - - - - -Other .................................................................................................... KGM
- - - - -Tubing, of an external diameter of 60.3 mm:
51 - - - - - -Of an A.P.I. grade H-40, J-55 or equivalent proprietary specification.. KGM
59 - - - - - -Other .................................................................................................... KGM
- - - - -Tubing, of an external diameter exceeding 60.3 mm but not exceeding
73 mm:
61 - - - - - -Of an A.P.I. grade H-40, J-55 or equivalent proprietary specification.. KGM
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
Issued July 1, 2020
73 - 4
69 - - - - - -Other .................................................................................................... KGM
- - - - -Tubing, of an external diameter exceeding 73 mm:
71 - - - - - -Of an A.P.I. grade H-40, J-55 or equivalent proprietary specification .. KGM
79 - - - - - -Other .................................................................................................... KGM
-Other, of circular cross-section, of iron or non-alloy steel:
7304.31.00 - -Cold-drawn or cold-rolled (cold-reduced) Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Mechanical tubes and pipes ................................................................... KGM
90 - - - - -Other ...................................................................................................... KGM
7304.39.00 - -Other Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
60 - - - - -Tubes and pipes, for boilers ................................................................... KGM
70 - - - - -Mechanical tubes and pipes ................................................................... KGM
80 - - - - -Standard pipes ....................................................................................... KGM
90 - - - - -Other ...................................................................................................... KGM
-Other, of circular cross-section, of stainless steel:
7304.41.00 - -Cold-drawn or cold-rolled (cold-reduced) Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Of an external diameter of less than 19 mm........................................... KGM
90 - - - - -Other ...................................................................................................... KGM
7304.49.00 - -Other Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
40 - - - - -Hollow profiles ........................................................................................ KGM
90 - - - - -Other ...................................................................................................... KGM
-Other, of circular cross-section, of other alloy steel:
7304.51.00 00 - -Cold-drawn or cold-rolled (cold-reduced) KGM Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
73 - 5
Issued July 1, 2020
7304.59.00 - -Other Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
50 - - - - -Mechanical tubes and pipes................................................................... KGM
90 - - - - -Other ...................................................................................................... KGM
7304.90.00 -Other Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Of iron or non-alloy steel ........................................................................ KGM
20 - - - - -Of alloy steel .......................................................................................... KGM
73.05 Other tubes and pipes (for example, welded, riveted or similarly closed),
having circular cross-sections, the external diameter of which exceeds
406.4 mm, of iron or steel.
-Line pipe of a kind used for oil or gas pipelines:
7305.11.00 - -Longitudinally submerged arc welded Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
- - - - -Of an external diameter not exceeding 609.6 mm:
12 - - - - - -Of an A.P.I. grade not exceeding X-52, of iron or non-alloy steel ........ KGM
13 - - - - - -Of an A.P.I. grade not exceeding X-52, of alloy steel .......................... KGM
14 - - - - - -Other, of iron or non-alloy steel............................................................ KGM
15 - - - - - -Other, of alloy steel .............................................................................. KGM
- - - - -Of an external diameter exceeding 609.6 mm:
22 - - - - - -Of an A.P.I. grade not exceeding X-52, of iron or non-alloy steel ........ KGM
23 - - - - - -Of an A.P.I. grade not exceeding X-52, of alloy steel .......................... KGM
24 - - - - - -Other, of iron or non-alloy steel............................................................ KGM
25 - - - - - -Other, of alloy steel .............................................................................. KGM
7305.12.00 - -Other, longitudinally welded Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
- - - - -Of an external diameter not exceeding 609.6 mm:
12 - - - - - -Of an A.P.I. grade not exceeding X-52, of iron or non-alloy steel ........ KGM
13 - - - - - -Of an A.P.I. grade not exceeding X-52, of alloy steel .......................... KGM
14 - - - - - -Other, of iron or non-alloy steel............................................................ KGM
15 - - - - - -Other, of alloy steel .............................................................................. KGM
- - - - -Of an external diameter exceeding 609.6 mm:
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
Issued July 1, 2020
73 - 6
21 - - - - - -Of an A.P.I. grade not exceeding X-52, of iron or non-alloy steel ........ KGM
22 - - - - - -Of an A.P.I. grade not exceeding X-52, of alloy steel........................... KGM
23 - - - - - -Other, of iron or non-alloy steel ............................................................ KGM
24 - - - - - -Other, of alloy steel .............................................................................. KGM
7305.19.00 - -Other Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
- - - - -Of an external diameter not exceeding 609.6 mm:
12 - - - - - -Of an A.P.I. grade not exceeding X-52, of iron or non-alloy steel ........ KGM
13 - - - - - -Of an A.P.I. grade not exceeding X-52, of alloy steel........................... KGM
14 - - - - - -Other, of iron or non-alloy steel ............................................................ KGM
15 - - - - - -Other, of alloy steel .............................................................................. KGM
- - - - -Of an external diameter exceeding 609.6 mm:
22 - - - - - -Of an A.P.I. grade not exceeding X-52, of iron or non-alloy steel ........ KGM
23 - - - - - -Of an A.P.I. grade not exceeding X-52, of alloy steel........................... KGM
24 - - - - - -Other, of iron or non-alloy steel ............................................................ KGM
25 - - - - - -Other, of alloy steel .............................................................................. KGM
7305.20.00 00 -Casing of a kind used in drilling for oil or gas KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
-Other, welded:
7305.31.00 - -Longitudinally welded Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
- - - - -Of iron or non-alloy steel:
11 - - - - - -Standard pipes ..................................................................................... KGM
19 - - - - - -Other .................................................................................................... KGM
20 - - - - -Of alloy steel........................................................................................... KGM
7305.39.00 - -Other Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
20 - - - - -Of iron or non-alloy steel ........................................................................ KGM
30 - - - - -Of alloy steel........................................................................................... KGM
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
73 - 7
Issued July 1, 2020
7305.90.00 -Other Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
10 - - - - -Of iron or non-alloy steel ........................................................................ KGM
20 - - - - -Of alloy steel .......................................................................................... KGM
73.06 Other tubes, pipes and hollow profiles (for example, open seam or
welded, riveted or similarly closed), of iron or steel.
-Line pipe of a kind used for oil or gas pipelines:
7306.11.00 00 - -Welded, of stainless steel KGM Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
7306.19.00 - -Other Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
10 - - - - -Of an A.P.I. grade not exceeding X-52 .................................................. KGM
90 - - - - -Other ...................................................................................................... KGM
-Casing and tubing of a kind used in drilling for oil or gas:
7306.21.00 00 - -Welded, of stainless steel KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7306.29.00 - -Other Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
- - - - -Casing, of an external diameter of 114.3 mm or more but not exceeding
177.8 mm:
11 - - - - - -Of an A.P.I. grade H-40, J-55, K-55 or equivalent proprietary
specification ......................................................................................... KGM
19 - - - - - -Other .................................................................................................... KGM
- - - - -Casing, of an external diameter exceeding 177.8 mm but not exceeding
298.4 mm:
21 - - - - - -Of an A.P.I. grade H-40, J-55, K-55 or equivalent proprietary
specification ......................................................................................... KGM
29 - - - - - -Other .................................................................................................... KGM
- - - - -Casing, of an external diameter exceeding 298.4 mm:
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
Issued July 1, 2020
73 - 8
31 - - - - - -Of an A.P.I. grade H-40, J-55, K-55 or equivalent proprietary
specification.......................................................................................... KGM
39 - - - - - -Other .................................................................................................... KGM
- - - - -Tubing:
61 - - - - - -Of an A.P.I. grade H-40, J-55 or equivalent proprietary specification .. KGM
69 - - - - - -Other .................................................................................................... KGM
7306.30.00 -Other, welded, of circular cross-section, of iron or non-alloy steel Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Galvanized, of an external diameter not exceeding 114.3 mm .............. KGM
20 - - - - -Other, of an external diameter not exceeding 114.3 mm ....................... KGM
30 - - - - -Of an external diameter exceeding 114.3 mm........................................ KGM
7306.40.00 -Other, welded, of circular cross-section, of stainless steel Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Of an external diameter not exceeding 25.3 mm.................................... KGM
20 - - - - -Of an external diameter exceeding 25.3 mm but not exceeding 114.9
mm ......................................................................................................... KGM
30 - - - - -Of an external diameter exceeding 114.9 mm........................................ KGM
7306.50.00 00 -Other, welded, of circular cross-section, of other alloy steel KGM Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
-Other, welded, of non-circular cross-section:
7306.61.00 - -Of square or rectangular cross-section Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Of iron or non-alloy steel ........................................................................ KGM
20 - - - - -Of alloy steel........................................................................................... KGM
7306.69.00 - -Of other non-circular cross-section Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Of iron or non-alloy steel ........................................................................ KGM
20 - - - - -Of alloy steel........................................................................................... KGM
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
73 - 9
Issued July 1, 2020
7306.90.00 -Other Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Of iron or non-alloy steel ........................................................................ KGM
20 - - - - -Of alloy steel .......................................................................................... KGM
73.07 Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or
steel.
-Cast fittings:
7307.11.00 00 - -Of non-malleable cast iron KGM Free AUT, NZT, CCCT, LDCT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7307.19.00 - -Other Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Unions .................................................................................................... KGM
90 - - - - -Other ...................................................................................................... KGM
-Other, of stainless steel:
7307.21.00 00 - -Flanges KGM Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
7307.22.00 - -Threaded elbows, bends and sleeves Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
10 - - - - -Sleeves .................................................................................................. KGM
90 - - - - -Other ...................................................................................................... KGM
7307.23.00 00 - -Butt welding fittings KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7307.29 - -Other
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
Issued July 1, 2020
73 - 10
7307.29.10 00 - - -To be employed in pneumatically breaking down the working face of a
mine in mining, quarrying or developing mineral deposits
KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7307.29.20 00 - - -For installation between the wellhead assembly or surface oil pumping unit
and the field marketing valve at oil or natural gas wells
KGM 4.5% CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
GPT: 4.5%
- - -Other:
7307.29.91 00 - - - -Not further worked than forged or bent to shape KGM Free AUT, NZT, CCCT, LDCT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7307.29.99 00 - - - -Other KGM Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
-Other:
7307.91.00 - -Flanges Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Of iron or non-alloy steel ........................................................................ KGM
20 - - - - -Of alloy steel........................................................................................... KGM
7307.92.00 - -Threaded elbows, bends and sleeves Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
10 - - - - -Of iron or non-alloy steel ........................................................................ KGM
20 - - - - -Of alloy steel, other than stainless steel ................................................. KGM
7307.93.00 - -Butt welding fittings Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
73 - 11
Issued July 1, 2020
10 - - - - -Of iron or non-alloy steel ........................................................................ KGM
20 - - - - -Of alloy steel, other than stainless steel................................................. KGM
7307.99.00 - -Other Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
- - - - -Of iron or non-alloy steel:
11 - - - - - -Couplings ............................................................................................. KGM
19 - - - - - -Other .................................................................................................... KGM
- - - - -Of alloy steel, other than stainless steel:
21 - - - - - -Couplings ............................................................................................. KGM
29 - - - - - -Other .................................................................................................... KGM
73.08 Structures (excluding prefabricated buildings of heading 94.06) and
parts of structures (for example, bridges and bridge-sections, lock-
gates, towers, lattice masts, roofs, roofing frame-works, doors and
windows and their frames and thresholds for doors, shutters,
balustrades, pillars and columns), of iron or steel; plates, rods, angles,
shapes, sections, tubes and the like, prepared for use in structures, of
iron or steel.
7308.10.00 00 -Bridges and bridge-sections KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7308.20.00 00 -Towers and lattice masts KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7308.30.00 -Doors, windows and their frames and thresholds for doors Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Sash, casement or frame sections, not punched, drilled or further
manufactured, whether or not coated, and similar material formed from
hot- or cold-rolled strip, whether or not coated, for use in the
manufacture of window sash, casements or frames .............................. TNE
- - - - -Doors and their frames:
21 - - - - - -Sliding .................................................................................................. NMB
22 - - - - - -Domestic garage.................................................................................. NMB
28 - - - - - -Other roll-up ......................................................................................... NMB
29 - - - - - -Other .................................................................................................... NMB
30 - - - - -Windows and their frames...................................................................... NMB
40 - - - - -Thresholds for doors .............................................................................. NMB
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
Issued July 1, 2020
73 - 12
7308.40.00 00 -Equipment for scaffolding, shuttering, propping or pit-propping KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7308.90.00 -Other Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Ceilings, including frames for suspended ceilings.................................. KGM
20 - - - - -Roofing ................................................................................................... -
30 - - - - -Siding, including soffit or fascia .............................................................. -
40 - - - - -Assembled fences, including barriers or crossing gates ........................ -
50 - - - - -Flooring; Roof drainage equipment ........................................................ KGM
60 - - - - -Columns, pillars, posts, beams, girders and similar structural units....... KGM
- - - - -Other:
95 - - - - - -Grills, air diffusers or ducts................................................................... KGM
96 - - - - - -Other architectural or ornamental work ................................................ KGM
99 - - - - - -Other .................................................................................................... KGM
7309.00.00 Reservoirs, tanks, vats and similar containers for any material (other
than compressed or liquefied gas), of iron or steel, of a capacity
exceeding 300 litres, whether or not lined or heat-insulated, but not
fitted with mechanical or thermal equipment.
Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
70 - - - - -Tanks...................................................................................................... NMB
90 - - - - -Other ...................................................................................................... NMB
73.10 Tanks, casks, drums, cans, boxes and similar containers, for any
material (other than compressed or liquefied gas), of iron or steel, of a
capacity not exceeding 300 litres, whether or not lined or heat-insulated,
but not fitted with mechanical or thermal equipment.
7310.10.00 -Of a capacity of 50 litres or more Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Cans ....................................................................................................... -
20 - - - - -Tanks...................................................................................................... -
30 - - - - -Drums..................................................................................................... -
90 - - - - -Other ...................................................................................................... -
-Of a capacity of less than 50 litres:
7310.21.00 - -Cans which are to be closed by soldering or crimping Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
73 - 13
Issued July 1, 2020
10 - - - - -For food.................................................................................................. NMB
90 - - - - -Other ...................................................................................................... NMB
7310.29.00 - -Other Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Tanks or drums ...................................................................................... NMB
20 - - - - -Cans....................................................................................................... NMB
90 - - - - -Other ...................................................................................................... NMB
7311.00.00 00 Containers for compressed or liquefied gas, of iron or steel. NMB Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
73.12 Stranded wire, ropes, cables, plaited bands, slings and the like, of iron
or steel, not electrically insulated.
7312.10.00 -Stranded wire, ropes and cables Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
- - - - -Stranded wire, alloyed steel:
11 - - - - - -Of a diameter not exceeding 5 mm...................................................... KGM
12 - - - - - -Of a diameter exceeding 5 mm............................................................ KGM
- - - - -Stranded wire, non-alloyed steel:
21 - - - - - -Of a diameter not exceeding 5 mm...................................................... KGM
22 - - - - - -Of a diameter exceeding 5 mm............................................................ KGM
- - - - -Ropes and cables, containing not more than eight strands, new:
31 - - - - - -Of a diameter not exceeding 25 mm.................................................... KGM
32 - - - - - -Of a diameter exceeding 25 mm but not exceeding 50 mm ................ KGM
33 - - - - - -Of a diameter exceeding 50 mm.......................................................... KGM
- - - - -Ropes and cables, containing more than eight strands, new:
41 - - - - - -Of a diameter not exceeding 25 mm.................................................... KGM
42 - - - - - -Of a diameter exceeding 25 mm but not exceeding 50 mm ................ KGM
43 - - - - - -Of a diameter exceeding 50 mm.......................................................... KGM
50 - - - - -Ropes and cables, used......................................................................... KGM
7312.90.00 00 -Other KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
Issued July 1, 2020
73 - 14
7313.00.00 00 Barbed wire of iron or steel; twisted hoop or single flat wire, barbed or
not, and loosely twisted double wire, of a kind used for fencing, of iron
or steel.
KGM Free AUT, NZT, CCCT, LDCT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
73.14 Cloth (including endless bands), grill, netting and fencing, of iron or
steel wire; expanded metal of iron or steel.
-Woven cloth:
7314.12.00 00 - -Endless bands for machinery, of stainless steel KGM Free AUT, NZT, CCCT, LDCT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7314.14.00 00 - -Other woven cloth, of stainless steel KGM Free AUT, NZT, CCCT, LDCT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7314.19.00 00 - -Other KGM Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
7314.20.00 00 -Grill, netting and fencing, welded at the intersection, of wire with a
maximum cross-sectional dimension of 3 mm or more and having a
mesh size of 100 cm² or more
KGM Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
-Other grill, netting and fencing, welded at the intersection:
7314.31.00 00 - -Plated or coated with zinc KGM Free AUT, NZT, CCCT, LDCT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7314.39.00 00 - -Other KGM Free AUT, NZT, CCCT, LDCT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
-Other cloth, grill, netting and fencing:
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
73 - 15
Issued July 1, 2020
7314.41.00 00 - -Plated or coated with zinc KGM Free AUT, NZT, CCCT, LDCT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7314.42.00 00 - -Coated with plastics KGM Free AUT, NZT, CCCT, LDCT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7314.49.00 00 - -Other KGM Free AUT, NZT, CCCT, LDCT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7314.50.00 00 -Expanded metal KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
73.15 Chain and parts thereof, of iron or steel.
-Articulated link chain and parts thereof:
7315.11.00 00 - -Roller chain KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7315.12.00 00 - -Other chain KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7315.19.00 00 - -Parts KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
Issued July 1, 2020
73 - 16
7315.20.00 00 -Skid chain KGM 6% CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
GPT: 3%
-Other chain:
7315.81.00 00 - -Stud-link KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7315.82.00 - -Other, welded link Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Of iron or non-alloy steel ........................................................................ KGM
20 - - - - -Of alloy steel........................................................................................... KGM
7315.89.00 00 - -Other KGM Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
7315.90.00 00 -Other parts KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7316.00 Anchors, grapnels and parts thereof, of iron or steel.
7316.00.10 00 - - -Of a weight of 18 kg or more NMB Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7316.00.20 00 - - -Of a weight of less than 18 kg NMB 6% CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
73 - 17
Issued July 1, 2020
7317.00.00 00 Nails, tacks, drawing pins, corrugated nails, staples (other than those of
heading 83.05) and similar articles, of iron or steel, whether or not with
heads of other material, but excluding such articles with heads of
copper.
KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
73.18 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter-
pins, washers (including spring washers) and similar articles, of iron or
steel.
-Threaded articles:
7318.11.00 00 - -Coach screws KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7318.12.00 00 - -Other wood screws KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7318.13.00 00 - -Screw hooks and screw rings KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7318.14.00 00 - -Self-tapping screws KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7318.15.00 - -Other screws and bolts, whether or not with their nuts or washers Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Screws ................................................................................................... KGM
- - - - -Bolts:
42 - - - - - -Hex head or machine........................................................................... KGM
45 - - - - - -Studs.................................................................................................... KGM
49 - - - - - -Other .................................................................................................... KGM
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
Issued July 1, 2020
73 - 18
7318.16.00 - -Nuts Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Lock........................................................................................................ KGM
90 - - - - -Other ...................................................................................................... KGM
7318.19.00 00 - -Other KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
-Non-threaded articles:
7318.21.00 00 - -Spring washers and other lock washers KGM Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
7318.22.00 00 - -Other washers KGM Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
7318.23.00 00 - -Rivets KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7318.24.00 00 - -Cotters and cotter-pins KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7318.29.00 00 - -Other KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
73.19 Sewing needles, knitting needles, bodkins, crochet hooks, embroidery
stilettos and similar articles, for use in the hand, of iron or steel; safety
pins and other pins of iron or steel, not elsewhere specified or included.
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
73 - 19
Issued July 1, 2020
7319.40 -Safety pins and other pins
7319.40.10 00 - - -Specially designed for marking systems - Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7319.40.90 00 - - -Other - 7% CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
GPT: 3%
7319.90 -Other
7319.90.10 00 - - -Sewing, darning or embroidery needles - 7% CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
GPT: 3%
7319.90.90 00 - - -Other - 7% CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
73.20 Springs and leaves for springs, of iron or steel.
7320.10.00 00 -Leaf-springs and leaves therefor KGM Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
7320.20.00 -Helical springs Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -For furniture............................................................................................ KGM
20 - - - - -For motor vehicles.................................................................................. KGM
90 - - - - -Other ...................................................................................................... KGM
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
Issued July 1, 2020
73 - 20
7320.90.00 -Other Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
20 - - - - -Of wire .................................................................................................... KGM
90 - - - - -Other ...................................................................................................... KGM
73.21 Stoves, ranges, grates, cookers (including those with subsidiary boilers
for central heating), barbecues, braziers, gas-rings, plate warmers and
similar non-electric domestic appliances, and parts thereof, of iron or
steel.
-Cooking appliances and plate warmers:
7321.11 - -For gas fuel or for both gas and other fuels
7321.11.10 00 - - -Non-portable stoves or ranges (including those specially designed for use
on boats)
NMB 8% CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
GPT: 5%
7321.11.90 - - -Other 8% CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
GPT: 5%
10 - - - - -Counter top units .................................................................................... NMB
30 - - - - -Grills ....................................................................................................... NMB
40 - - - - -Portable stoves or ranges....................................................................... NMB
90 - - - - -Other ...................................................................................................... NMB
7321.12.00 00 - -For liquid fuel NMB 8% CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
GPT: 5%
7321.19 - -Other, including appliances for solid fuel
7321.19.10 00 - - -Non-portable stoves or ranges (including those specially designed for use
on boats)
NMB 8% CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
GPT: 5%
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
73 - 21
Issued July 1, 2020
7321.19.90 00 - - -Other NMB 8% CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
GPT: 5%
-Other appliances:
7321.81.00 00 - -For gas fuel or for both gas and other fuels NMB 7% CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
GPT: 5%
7321.82.00 00 - -For liquid fuel NMB 7% CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
GPT: 5%
7321.89.00 00 - -Other, including appliances for solid fuel NMB 7% CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
GPT: 5%
7321.90 -Parts
7321.90.10 - - -Cast iron grilles, of a weight not exceeding 3 kg, not further worked than as
cast, cut and ground, for use in the manufacture of finished grilles for non-
industrial non-portable stoves or ranges, for gas fuel or for both gas or
other fuels;
For appliances, excluding cooking appliances and plate warmers;
For cooking appliances and plate warmers for gas fuel or for both gas and
other fuels, excluding non-portable stoves or ranges (including those
specially designed for use on boats)
Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -For appliances, excluding cooking appliances and plate warmers ........ -
90 - - - - -Other ...................................................................................................... -
- - -For non-portable stoves or ranges (including those specially designed for
use on boats), for gas fuel or for both gas or other fuels:
7321.90.21 00 - - - -Cooking chambers - 8% CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
GPT: 5%
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
Issued July 1, 2020
73 - 22
7321.90.22 00 - - - -Top surface panels - 8% CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
GPT: 5%
7321.90.23 00 - - - -Door assemblies, incorporating at least two of the following: inner panel,
outer panel, window, insulation
- 8% CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
GPT: 5%
7321.90.24 00 - - - -Oven pilot burners, top burners of other than cast iron, oven burners and
lighter cones, for use in the manufacture of ranges
- Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7321.90.29 00 - - - -Other - 8% CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
GPT: 5%
7321.90.90 00 - - -Other - 8% CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
GPT: 5%
73.22 Radiators for central heating, not electrically heated, and parts thereof,
of iron or steel; air heaters and hot air distributors (including
distributors which can also distribute fresh or conditioned air), not
electrically heated, incorporating a motor-driven fan or blower, and parts
thereof, of iron or steel.
-Radiators and parts thereof:
7322.11.00 00 - -Of cast iron NMB 7% CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
73 - 23
Issued July 1, 2020
7322.19.00 00 - -Other NMB 7% CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7322.90 -Other
7322.90.10 - - -For heating buildings 7.5% CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
GPT: 5%
- - - - -Warm air furnaces and parts thereof:
21 - - - - - -Gas ...................................................................................................... NMB
29 - - - - - -Other .................................................................................................... NMB
30 - - - - -Gas fired unit heaters, including parts.................................................... NMB
90 - - - - -Other ...................................................................................................... NMB
7322.90.20 00 - - -Process air heaters;
Switch heaters and sensing heads (hot air and oil fired), horizontal air
curtains, for railway tracks
NMB 7.5% CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7322.90.90 00 - - -Other NMB Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
73.23 Table, kitchen or other household articles and parts thereof, of iron or
steel; iron or steel wool; pot scourers and scouring or polishing pads,
gloves and the like, of iron or steel.
7323.10.00 00 -Iron or steel wool; pot scourers and scouring or polishing pads, gloves
and the like
KGM 6.5% CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
GPT: 3%
-Other:
7323.91.00 00 - -Of cast iron, not enamelled - 6.5% CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
GPT: 5%
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
Issued July 1, 2020
73 - 24
7323.92.00 00 - -Of cast iron, enamelled - 6.5% CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
GPT: 5%
7323.93.00 - -Of stainless steel 6.5% CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
GPT: 5%
50 - - - - -Cooking utensils and kitchenware.......................................................... NMB
90 - - - - -Other ...................................................................................................... NMB
7323.94.00 - -Of iron (other than cast iron) or steel, enamelled 6.5% CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
GPT: 5%
10 - - - - -Cooking utensils ..................................................................................... NMB
- - - - -Other:
91 - - - - - -Subject to customs duty based on excise duty .................................... NMB
99 - - - - - -Other .................................................................................................... NMB
7323.99.00 00 - -Other - 6.5% CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
GPT: 5%
73.24 Sanitary ware and parts thereof, of iron or steel.
7324.10.00 -Sinks and wash basins, of stainless steel 7% CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
GPT: 5%
10 - - - - -Kitchen sinks .......................................................................................... NMB
90 - - - - -Other ...................................................................................................... NMB
-Baths:
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
73 - 25
Issued July 1, 2020
7324.21.00 00 - -Of cast iron, whether or not enamelled NMB 7% CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
GPT: 5%
7324.29 - -Other
7324.29.10 00 - - -Stampings and assemblies thereof, for use in the manufacture of bath tubs NMB Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7324.29.90 00 - - -Other NMB 7% CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
GPT: 5%
7324.90.00 00 -Other, including parts - 6.5% CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
GPT: 5%
73.25 Other cast articles of iron or steel.
7325.10.00 -Of non-malleable cast iron 6% CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
GPT: 5%
10 - - - - -In the rough ............................................................................................ KGM
90 - - - - -Other ...................................................................................................... KGM
-Other:
7325.91.00 - -Grinding balls and similar articles for mills Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Of cast iron............................................................................................. KGM
90 - - - - -Other ...................................................................................................... KGM
7325.99 - -Other
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
Issued July 1, 2020
73 - 26
7325.99.10 00 - - -The following, to be employed in the exploration, discovery, development,
maintenance, testing, depletion or production of oil or natural gas wells or
potash or rock salt deposits:
Flanged casing heads;
Screwed casing heads for surface casings of an external diameter
exceeding 273 mm, or rated for service in working pressures exceeding
14 MPa W.O.G. (water, oil, gas)
KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
- - -Other:
7325.99.91 00 - - - -In the rough KGM 6% CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
GPT: 5%
7325.99.99 00 - - - -Other KGM 6.5% CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
GPT: 5%
73.26 Other articles of iron or steel.
-Forged or stamped, but not further worked:
7326.11.00 00 - -Grinding balls and similar articles for mills KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7326.19 - -Other
7326.19.10 00 - - -Flanged wellhead tubing heads and flanged casing head spools, in the
rough, for use in the manufacture of wellhead tubing heads or casing head
spools, rated for service in working pressures exceeding 14 MPa W.O.G.
(water, oil, gas), to be employed in the exploration, discovery,
development, maintenance, testing, depletion or production of oil or
natural gas wells;
Wick sustainers for use in the manufacture of candles
KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7326.19.90 00 - - -Other KGM 6.5% CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
GPT: 5%
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
73 - 27
Issued July 1, 2020
7326.20.00 00 -Articles of iron or steel wire - 6.5% CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
GPT: 5%
7326.90 -Other
7326.90.10 00 - - -Couplings for sucker rods, pony rods or polished rods for oilfield related
pumps;
Fishing tools and parts thereof to be employed in the exploration,
discovery, development, maintenance, testing, depletion or production of
oil or natural gas wells or for drilling machinery employed in the
exploration, discovery, development or operation of potash or rock salt
deposits;
For climbing or mountaineering;
For keeping nets open and swivels, to be employed in commercial fishing
or in the commercial harvesting of marine plants;
For use in the manufacture of detectors for propane or other toxic fumes;
For use in the manufacture of fire fighting vehicles;
For use in the manufacture of goods of Section XVI or of Chapter 73, such
goods being used in the recovery or production of crude oil from shales,
oil-sands or tar-sands;
For use in the manufacture or repair of engines or parts thereof for
commercial fishing vessels;
Forged steel clevis hooks and eye hooks for use in the manufacture of
debris chutes;
Identification bands for migratory birds;
Pitless well heads and parts thereof;
Reusable containers, specially designed to be employed in the
transportation of motor vehicle components which are free of customs
duties, presented with the goods therein;
Seat post clamps and cable hangers for use in the manufacture of
unicycles, bicycles or tricycles;
Semi-elliptical heads, of an external diameter of either 609.6 mm or
762 mm, to specification ASTM A455, for use in air compressor tanks;
Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for
use in the manufacture of debris chutes and chute hoists;
Steel stanchions for confining livestock either in pens or individually;
The following to be employed in the exploration, discovery, development,
maintenance, testing, depletion or production of oil or natural gas wells or
potash or rock salt deposits:
Flanged casing heads;
Screwed casing heads for surface casings of an external diameter
exceeding 273 mm, or rated for service in working pressures exceeding
14 MPa W.O.G. (water, oil, gas);
Well packers and parts thereof;
To be employed in the processing, storing or insemination of animal
semen;
Tracks for use in the manufacture of skid steer loaders;
Vacuum evaporator masks, of stainless steel, having a 90% front etch and
10% back etch, for the production of photo cells;
Wick sustainers for use in the manufacture of candles
- Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
Issued July 1, 2020
73 - 28
7326.90.90 - - -Other 6.5% CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
GPT: 3%
10 - - - - -Articles of tinplate ................................................................................... -
20 - - - - -Ladders .................................................................................................. NMB
30 - - - - -Hangers and similar supports, for tubes and pipes ................................ KGM
50 - - - - -Containers, of a kind normally carried on the person, in the pocket or in
the handbag ........................................................................................... NMB
90 - - - - -Other ...................................................................................................... -
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
top related