66th canadian chemical engineering conference october 16-19
Post on 02-Jan-2017
231 Views
Preview:
TRANSCRIPT
66th Canadian Chemical Engineering ConferenceOctober 16-19, 2016 QUÉBEC CITY, QC
SUSTAINABILITY AND PROSPERITY
Canadian Society for Chemical Engineering | For Our Future
Chemists, chemical engineers, and chemical technologists are society’s problem solvers. From advances in healthcare and pharmaceuticals, to energy, the environment, and food and water, they find solutions for our future.
The Canadian Society for Chemical Engineering (CSChE) is one of three constituent societies of the Chemical Institute of Canada (CIC), which is committed to advancing the chemical sciences and engineering. CIC serves its approximately 6,000 members and achieves its mission by
• organizing Canada’s two premier annual conferences for the chemical sciences and engineering;• publishing ACCN, the Canadian Chemical News and The Canadian Journal of Chemical Engineering;• conferring awards;• overseeing a network of Local Sections, Student Chapters, and Subject Divisions;• lobbying the government on issues of research funding and regulations;• accrediting university programs and certifying chemical technologists; and• reaching out to the public to advance their understanding and appreciation of the chemical sciences and engineering. As well as enjoying several benefits, such as discounted rates for our conferences and a complimentary subscription to
our magazine, members of the constituent societies of the CIC become part of Canada’s diverse and prestigious community of chemical scientists, engineers, and technologists. To find out more, visit www.cheminst.ca.
Final Program BookThis program book is produced by the Canadian Society for Chemical Engineering. It provides a general overview of the conference at the time of its creation. Please note that last-minute changes are unavoidable.
PresidentSantiago Faucher
Vice-PresidentUttandaraman Sundararaj
TreasurerNathalie Tufenkji
Past PresidentAmarjeet Bassi
Executive DirectorRoland Andersson
Canadian Society for Chemical Engineering (CSChE) Officers
ISBN 0-920804-52-7
October 22–25, 2017 October 28–31, 2018Edmonton, AB Toronto, ON
Upcoming CSChE Conferences
Canadian Society for Chemical Engineering222 Queen Street, Suite 400 Ottawa, ON, Canada K1P 5V9T. 613-232-6252 • F. 613-232-5862 • www.cheminst.ca
The official language of the conference is English. No translation or simultaneous interpretation will be provided.
Conference Organizing CommitteeAlain Garnier, Conference Chair, Université Laval, Martine Péloquin, Conference Vice-chair, Valero, Faïçal Larachi, Technical Program Chair, Université Laval, Frej Mighri, Volunteer Coordinator, Université Laval, Ann Bourassa, Secretary,
Université Laval, Nathalie Tufenkji, CSChE Treasurer, Université McGill, Brian Lowry, CSChE Director of Conferences,
University of New Brunswick, Roland Andersson, Executive Director, CSChE, Joan Kingston, Director, Finance and
Operations , CSChE, Bernadette Dacey, Director, Communications and Marketing, CSChE, Gale Thirlwall, Awards
Manager, CSChE, Krista Leroux, Manager, Creative Services, CSChE, Michelle Payne, Manager, Technical Programs,
CSChE, Christina Ghazal, Events Coordinator, CSChE, Amy Reckling, Career Development Leader, CSChE
XXIX Interamerican Congress of Chemical Engineering Incorporating CSChE2018
Table of Contents
Welcome Messages 4
Sponsors 7
Meeting and Event Schedule 8
Student Program 11
Plenary Lectures 13
Award Lectures 17
CIC Fellows 2016 19
Keynote Lectures 20
Exhibition 22
4
Welcome Messages
On behalf of the Canadian Society for Chemical Engineering (CSChE) and our Conference Sponsors, it is
a pleasure to welcome you to the 66th Canadian Chemical Engineering Conference in this beautiful and
historic capital of Québec.
Our Society’s Vision is to develop Solutions for a Better World. This year’s CSChE conference program
reflects this conviction with a theme of Sustainability and Prosperity and associated symposia and divisional
sessions. Alongside this theme Le Consortium de recherche et innovations en bioprocédés industriels au Québec is
contributing two exciting days of programing to the CSChE conference entitled the Biobased economy in Quebec:
Innovation, Challenges and Opportunities.
Please join me in thanking the Université Laval Organizing Committee and its volunteers, led by Conference
Chair Alain Garnier, Technical Program Chair Faiçal Larachi, and Conference Vice-chair Martine Péloquin of
Valero for bringing us together to share this great programing.
Our Society’s Mission is to advance the chemical engineering profession and the careers of its practitioners
to achieve our common vision. We do this through facilitating the exchange of knowledge, enabling lifelong
learning, and promoting STEM education. These activities ultimately require us to connect with all chemical
engineering practitioners to create a strong, representative, and complete community of chemical engineers
in Canada. Towards this end the CSChE Strategic Initiatives Committee is making recommendations to the
CSChE board that, when implemented, will allow our members to connect with a larger chemical engineering
community in Canada. Please join us in this transformation by asking how you can help.
Finally, thank you for taking the time to attend your national conference. Through your investment we are
learning about the challenges our society faces and their potential solutions. Ultimately this new knowledge,
supported by your chemical engineering community, will lead us to solve world shortages in food, water,
materials , and bio-medical remedies while reducing our impact on the environment.
Santiago Faucher
Message from the CSChE President
5
Welcome Messages
On behalf of the conference organizing committee and the Canadian Society for Chemical Engineering
(CSChE), we are pleased to welcome you to the 66th Canadian Chemical Engineering Conference, to be
held in Québec City, October 16-19, 2016.
The conference theme Sustainability and Prosperity illustrates the sometimes contrasting challenge faced
by society and in particular chemical engineers. Who is better positioned than us, designers and managers of
chemical processes, to reconcile the need for effective and competitive manufacturing plants with the need to
reduce their environmental footprint? The conference will address this challenge by combining the usual subject
division programs with special symposia on Rheology of Complex Fluids; Carbon Capture, Utilisation and Storage;
Challenges and Opportunities for Micro-algal Technologies; Fats & Oils: Sustainability and Innovation; and Indus-
trial Biotechnology (in collaboration with CRIBIQ). Process Safety and Loss Management and Chemical Engineering
Education sessions will also figure prominently. In addition, two honorary symposia will be held to outline the
outstanding contributions of Professor Pierre Carreau from École Polytechnique de Montréal in Rheology and
Polymer Nanocomposites and Professor Serge Kaliaguine, on his 50th anniversary at Laval, in Catalysis.
Ten regular sessions will complete the program: Biotechnology & Bioengineering; Biomedical Engineering; Catal-
ysis and Catalytic Reaction Engineering; Chemical Engineering Foundations; Electrochemistry and Electrochemical
Engineering; Energy Resources; Environment; Macromolecular Sciences and Engineered Polymers; Nanomaterials
and Nanotechnology; as well as Systems and Control.
Four prestigious plenary speakers will highlight important aspects of our discipline: Professor Guy B Marin,
Ghent University, Belgium, Dr. Jean-Luc Dubois, Scientific Director at Arkema, Professor Jamal Chaouki, École
Polytechnique de Montréal and the R. S. Jane Memorial Lecturer Professor Shiping Zhu, FCIC, McMaster University.
Québec City, a UNESCO world heritage site, will provide a fabulous backdrop for our conference. Québec’s
legendary hospitality will welcome you as you enjoy one of Canada’s most beautiful regions, combining culture
and gastronomy with history, architecture and nature. We hope you will use the occasion of this conference to
share this experience with your friends and family.
Alain Garnier and Martine Péloquin
Message from the Conference Chair and Vice-chair
RECOGNIZE OUTSTANDING ACHIEVEMENTSNominate a deserving chemical engineer for the Canadian Society for Chemical Engineering (CSChE) 2017 Awards. View terms of reference and submit nominations at www.cheminst.ca/awards.
The 2017 selection deadline is December 1, 2016.
CSChE AWARDS: Award in Design and Industrial Practice • D. G. Fisher Award • Process Safety Management Award • R. S. Jane Memorial Award • Hatch Innovation Award • The Canadian Journal of Chemical Engineering Lectureship Award
7
Supporter
Sponsors
We thank the following sponsors for their generous support of our conference. They have allowed us to offer you an exciting and rewarding program.
Gold
Silver
Bronze
Chemical Institute of Canada – Chemical Education FundFeldan TherapeuticsGovernment of QuébecIPL PlasticsSiliCycle Inc.
8
Meeting and Event Schedule
Saturday, October 1508:30–09:30 Can. J. Chem. Eng. Publications Committee Meeting Hilton, Orléans Room
10:00–16:00 CSChE Board of Directors Meeting Hilton, Villeray Room
Sunday, October 1608:00–14:00 CIC Board of Directors Meeting Hilton, Villeray Room
11:00–19:30 Registration QCCC, Hall 2000
12:00–16:00 Association of Canadian Chairs of Chemical Engineering Hilton, DeTourny Room (ACCCE) Meeting
13:00–17:00 Speaker Ready Room QCCC, Room 2104B
15:00–19:00 Early Career Publishing Workshop QCCC, Room 2101
19:00–22:00 Welcome Reception and Exhibition QCCC, Room 2000C
Monday, October 1707:00–16:00 Speaker Ready Room QCCC, Room 2104B
07:00–17:00 Registration QCCC, Hall 2000
08:00–17:40 Technical Sessions QCCC, Throughout
09:30–19:30 Exhibition QCCC, Room 2000C
10:00–10:30 AM Coffee Break QCCC, Room 2000C
10:30–12:00 Conference Opening and Plenary Lecture (Jean-Luc Dubois) QCCC, Room 2000AB
12:00–13:00 Lunch Break
12:00–13:00 NSERC Discovery Grants: Results, Questions and Answers QCCC, Room 204A
13:00–14:00 Plenary Lecture (Jamal Chaouki) QCCC, Room 2000AB
15:40–16:00 PM Coffee Break QCCC, Room 2000C
17:40–19:30 Poster Session and Reception QCCC, Room 2000C
17:40–19:30 Biotechnology Division Annual General Meeting QCCC, Room 2101
17:40–19:30 Systems and Control Annual General Meeting QCCC, Room 203
17:45–18:45 Process Safety Management Division Annual General Meeting QCCC, Room 204A
18:30–19:30 Can. J. Chem. Eng. Reception (By invitation only) Hilton, Plaines Room
QCCC=Québec City Convention CentreHilton=Hilton Québec Hotel
9
Meeting and Event Schedule
Tuesday, October 1807:00–16:00 Speaker Ready Room QCCC, Room 2104B
07:00–17:00 Registration QCCC, Hall 2000
08:00–17:40 Technical Sessions QCCC, Throughout
09:30–16:00 Exhibition QCCC, Room 2000C
10:30–11:00 AM Coffee Break QCCC, Room 2000C
11:00–12:00 Plenary Lecture (Guy B Marin) QCCC, Room 2000AB
12:00–12:30 51st CSChE Annual General Meeting QCCC, Room 203
12:00–13:00 Lunch Break
13:00–14:00 Plenary Lecture: R. S. Jane Memorial Award (Shiping Zhu, FCIC) QCCC, Room 2000AB
14:00–15:00 Can. J. Chem. Eng. Associate Editors Meeting Hilton, Lauzon Room
15:40–16:00 PM Coffee Break QCCC, Room 2000C
18:00–19:00 CIC Chair and CSChE President’s Reception (By invitation only) Musée national des beaux-arts du Québec
19:00–19:30 CIC and CSChE Awards Reception Musée national des beaux-arts du Québec
19:30–22:00 CIC and CSChE Awards Banquet Musée national des beaux-arts du Québec
Wednesday, October 1907:00–08:00 CSChE Subject Division Executive Meeting Hilton, Sainte-Foy/ Portneuf Room
07:00–13:00 Registration QCCC, Hall 2000
07:00–14:00 Speaker Ready Room QCCC, Room 2104B
08:00–17:40 Technical Sessions QCCC, Throughout
10:00–10:20 AM Coffee Break QCCC, Foyer 2000
12:00–13:00 Lunch Break
12:00–13:00 Organizing Committee Conference Debriefing Meeting Hilton, Sainte-Foy/ Portneuf Room
12:00–13:00 “Writing a Discovery Grant” Workshop QCCC, 204A
15:00–15:20 PM Coffee Break QCCC, Foyer 2000
Thursday, October 2009:00–15:00 Process Safety Management Division Committee Meeting Hilton, Sainte-Foy/ Portneuf Room
QCCC=Québec City Convention CentreHilton=Hilton Québec Hotel
11
On behalf of the graduate and undergraduate student organizing committees, and the Canadian Society for Chemi-
cal Engineering (CSChE), we are pleased to welcome you to the 66th Canadian Chemical Engineering Conference.
Inspired by this year’s conference theme, Sustainability and Prosperity, we’ve organized a series of semi-
nars and workshops that we hope will promote a deeper understanding of these integral components of modern
chemical engineering. We have worked hard to create a program to complement and enhance your university
education. Our wish is for you to take this opportunity to network, learn and participate in the many conference
events that are here to ignite your interest in the scientific, academic and social knowledge that has brought us
together for the 66th CSChE conference.
On behalf of the student organizing committees and the chemical engineering department at Université Laval, we
hope that you share our enthusiasm for this year’s conference and warmly welcome you to beautiful Québec City.
Alec Bourgault-Giguère, Undergraduate Student Co-chair Antoine Marceau, Undergraduate Student Co-chair Atieh Bahrami, Graduate Student Chair
Student Welcome Message
Student Program
Sunday, October 1613:00–14:00 Student Welcome and Plenary Lecture QCCC, Room 206A
14:00–17:30 Robert G. Auld and Reg Friesen Competitions QCCC, Room 206A
14:00–17:30 Graduate Studies Fair QCCC, Foyer 206
15:00–19:00 Early Career Publishing Workshop QCCC, Room 2101
19:00–22:00 Welcome Reception and Exhibition QCCC , Room 2000C
Monday, October 1708:00–09:00 Keynote Lecture (Trish Kerin) QCCC, Room 204A
09:00–10:30 Minerva – CIAC Responsible Care Case Study Competition QCCC, Room 204A
09:30–19:30 Exhibition QCCC, Room 2000C
10:00–10:30 AM Coffee Break QCCC, Room 2000C
10:30–12:00 Conference Opening and Plenary Lecture (Jean-Luc Dubois) QCCC, Room 2000AB
12:00–14:00 Hatch Plant Design Competition QCCC, Room 206B
13:00–14:00 Plenary Lecture (Jamal Chaouki) QCCC, Room 2000AB
14:00–15:00 Enerkem Seminar: MSW to biofuels and QCCC, Room 206B chemicals: A commercial reality in Canada
15:00–16:30 Student Workshop: Exploring the World of QCCC, Room 206B Process Safety Management
15:40–16:00 PM Coffee Break QCCC, Room 2000C
17:40–19:30 Poster Session and Reception QCCC, Room 2000C
17:40–19:30 Graduate Student Poster Competition QCCC, Room 2000C
19:00–22:00 Undergraduate Student Awards Banquet Espace Dalhousie, Room 101–102
Tuesday, October 1808:00–13:30 Student Industry Tours Off-site
09:30–16:00 Exhibition QCCC, Room 2000C
10:00–11:00 CSChE Student Chapter President’s Meeting QCCC, Room 2103
10:30–11:00 AM Coffee Break QCCC, Room 2000C
11:00–12:00 Plenary Lecture (Guy B Marin) QCCC, Room 2000AB
12:00–12:30 51st CSChE Annual General Meeting QCCC, Room 203
12:00–13:00 Grad Student Workshop: A Guide to Score your Dream Job QCCC, Room 2103
13:00–14:00 Plenary Lecture: R. S. Jane Award (Shiping Zhu, FCIC) QCCC, Room 2000AB
14:00–15:00 Grad Student Workshop: The Art of Networking QCCC, Room 2103
15:40–16:00 PM Coffee Break QCCC, Room 2000C
QCCC = Québec City Convention Centre
13
Plenary Lectures
Monday, October 17 10:30–12:00Québec City Convention Centre, Room 2000AB
Jean-Luc DuboisArkema, France
Acrolein Production from Renewable Resources: Glycerol and Ethanol RoutesAcrolein is an important chemical intermediate for fine chemicals and in the methionine and acrylic acid produc-
tion. Glycerol double intra-molecular dehydration leads to Acrolein over acidic catalysts in a process developed by
Arkema. Co-feeding oxygen at the dehydration stage, proved to be a solution to reduce production of side products,
but also to extend the catalyst time on stream. One of the difficulties of this chemistry remains the slow but steady
deactivation of catalysts due to coke formation. Understanding the mechanism leading to coke formation and its
role in the reaction selectivity has been carried out in a bubbling fluidized bed. As coke builds up on the catalyst,
the reaction selectivity improves, while the catalyst active sites distribution is significantly affected.
Another challenge in this reaction is the content of propanaldehyde in the reaction product. Propanaldehyde
will react as Acrolein in consecutive reactions like oxidations, acetalization but will not polymerize; leading
to the same problem for its oxidation product: propionic acid versus acrylic acid. A solution, using oxidation
catalysts, to selectively react propanaldehyde in Acrolein-rich streams has been investigated and patented with
acceptable low level of propanaldehyde.
A second innovative route to Acrolein is direct oxidation of a Methanol/Ethanol composition, called Alcohols
Oxidative Coupling; whereby Methanol and Ethanol are oxidized to the respective aldehydes, followed by aldol-
ization and dehydration to Acrolein. Catalysts with the appropriate balance of redox and acid/base sites, such as
iron-molybdate catalysts are to produce Acrolein in a single-step reaction.
13:00–14:00Québec City Convention Centre, Room 2000AB
Jamal ChaoukiÉcole Polytechnique de Montréal
Yesterday, Waste was a Problem. Today, it is a Valuable ResourceAccording to the World Bank report (2012), the global amount of Municipal Solid Waste (MSW) is expected
to grow from 1.3 billion tonnes per year in 2012 to 2.2 billion tonnes/year in 2025 and to 4.2 billion tonnes/
year by 2050. Today, North America and the European Union are recognized as major producers of MSW, but
the MSW production rates are also rapidly increasing in developing economies. Due to global environmental
concerns, more research has been actively focused on the efficient use of energy resources and the effective
utilization of renewable biomass resources as well as non-recycle waste material. As it will be examine in this
article, incineration is currently the most dominating waste-to-energy (WtE) technology for MSW and biomass
processing resulting in energy recovery of different types of waste into heat and electricity. Other advanced
disposal technologies, which also will be discussed, need to be implemented, to provide higher energy efficiency,
to produce chemicals and to meet increasingly stringent environmental regulations. Among these technologies,
pyrolysis, gasification and co-combustion are attractive approaches to develop an environmentally, economically
and sustainable solid waste and biomass management process.
If you’re an employer, post job openings at www.cheminst.ca/career for quick results.
• Search and apply for jobs online. • Get job alerts by email.
• Create an online résumé. Start your search at the Chemical Institute of Canada Career Site, www.cheminst.ca/career
JOB HUNTING?
15
Plenary Lectures
13:00–14:00Québec City Convention Centre, Room 2000AB
R.S. Jane Memorial Award LectureShiping Zhu, FCICMcMaster University
Polymer Reaction Engineering for Advanced MaterialsWe are living in the “Materials World”. We currently consume more polymeric materials than all other types of synthetic materials combined. Chemical engineering is about production and processing of materials and chemi-cals in safe, sustainable and profitable ways, through design, optimization and control. Reaction engineering and separation engineering are the two foundations in chemical engineering. Polymers are chain molecules and their material properties are determined to a large extent by their chain microstructural properties such as molecular weight distribution, copolymer composition distribution, sequence distribution, tacticity, branching, crosslink-ing, topology, and so on. Polymers are the products of processes. A small difference in process could make a totally different polymer product because of variety of the chain microstructure, which provides great opportuni-ties for discovery and innovation in making new polymer products and in upgrading existing polymer products.
Presented in this talk are a chemical engineer’s point of view on the development of advanced polymer materials and several research examples of our effort in making better polymers through innovative reaction engineering approaches, including making polymers stronger in application and easier to process, precision production of polymers through semi-batch and continuous reactor operations, and designing of greener polymer products. Presented are also some recent works on applying smart polymers as facilitating reagents in separation engineering that save energy and benefit our environment.
Tuesday, October 18 11:00–12:00Québec City Convention Centre, Room 2000AB
Guy B MarinGhent University, Belgium
Bridges in Modelling and Simulation of Steam-cracking: From Fossil to Renewable Feedstock and from Molecule to FurnaceThis lecture will focus on the thermal conversion of fossil or renewable feedstocks to olefins. Fossil/renewable feedstocks consist of a considerable amount of types of molecules but the available information is limited to commercial indices with macroscopic properties, e.g. density and boiling point trajectory. A broad range of feed-stocks was analyzed by GCxGC and constituted a training set for so-called molecular reconstruction methods. The latter allow using the available macroscopic properties to characterize the feedstock in the terms required fundamental for fundamental kinetic models like those implemented in COILSIM1D, a suite of codes commer-cialized by a recent latter allow using the available macroscopic properties to characterize the feedstock in the terms required for spinoff of Ghent University. Group contribution methods are applied to calculate the required kinetic parameters. These group contributions follow from a kinetic database obtained by high level ab-initio calculations involving representative molecules and reactions. Soundness of the approach has been confirmed by the agreement between calculated product yields and pilot and industrial data without adjusting any of the first-principles derived group contribution values.
The validated kinetic model has been implemented in reactor models. The latter go way beyond the ideal plug flow assumption and allow to investigate the effect of a so-called 3D reactor geometry on the heat transfer from the furnace to the process gas and, hence, on the rate at which coke is deposited on the internal reactor walls. This, together with accounting for the interaction between the furnace and the reactor coils, allow COILSIM1D to provide an accurate and fast estimation of the run length of steam cracking furnaces.
INCREASE YOUR INTERNATIONAL INFLUENCE
Submit your papers to Can. J. Chem. Eng.Thematic areas • Biotechnology, Biochemical + Biomedical Engineering
• Environment, Renewable Resources + Green Processes
• Industrial Applications of Chemical Engineering Principles
• Interfacial + Electrochemical Phenomena
• New Materials, Nanomaterials + Nanotechnology
• Process Control, Systems Engineering + Statistics
• Reaction Engineering, Chemical Kinetics + Catalysis
• Separation Processes
• Transport Phenomena, Fluid Dynamics + Thermodynamics
Visit https://mc.manuscriptcentral.com/cjce to submit today!
Did you know that CSChE members have lower subscription fees?
Email info@cheminst.ca for details.
Can. J. Chem. Eng. is published by John Wiley & Sons, Inc. on behalf of the
wileyonlinelibrary.com
THE CANADIAN JOURNAL OF
CHEMICAL ENGINEERING
João B.P. Soares, FCICEditor-in-Chief
17
Canadian Society for Chemical Engineering (CSChE) Award Lectures
Hatch Innovation AwardSponsored by Hatch
Nathalie TufenkjiUniversité McGill
Monday, October 17 • 16:00–16:40
Room: 2101, Symposium: BBE4
Can Natural Extracts Help Us in the Fight Against Antibiotic Resistance?
Award for Best Graduate Student Paper Published in the The Canadian Journal of Chemical EngineeringSponsored by The Canadian Journal of Chemical Engineering
Aida Sharif RohaniUniversity of Ottawa
Monday, October 17 • 16:40–17:00
Room: 205C, Symposium: ENR2
Multi-objective Optimization of Biobutanol Production
R. S. Jane Memorial AwardSponsored by the CSChE
Shiping Zhu, FCICMcMaster University
Tuesday, October 18 • 13:05–13:45
Room: 2000AB, Symposium: PLS
Polymer Reaction Engineering for Advanced Materials
D.G. Fisher AwardSponsored by the Department of Chemical and
Materials Engineering, University of Alberta, Suncor
Energy Foundation and Shell Canada Limited
Paul NomikosINVISTA Canada
Tuesday, Ocotber 18 • 14:00–14:40
Room: 203, Symposium: SYC2
Data Driven Value Creation
Process Safety Management AwardSponsored by Atkins
Richard PietteSuncor Energy Inc.
Wednesday, October 19 • 10:50–11:20
Room: 205B, Symposium: PSM5
Implementation of PSM Systems Rely on Strong Lead-ership Commitment to Succeed. Often the Need to Incorporate Strong Technical Capabilities is Forgotten
All Award Lectures will be held in the Québec City Convention Centre.
Award Lectures
Canadian Green Chemistry and Engineering Network Award Lecture
Canadian Green Chemistry and Engineering Award (Individual)Sponsored by GreenCentre Canada
Roger GaudreaultTGWT Clean Technologies Inc.
Wednesday, October 19 • 13:00–13:40
Room: 205C, Symposium: ENR4
Three Decades of Innovative and Engineered Green Chemistry
19
CIC Fellows 2016
The Fellowship of the Chemical Institute of Canada was created as a senior class of membership to recognize outstanding merit of those who have made, or who are clearly in the course of making, a sustained and major contribution to the science or to the profession of chemistry, chemical engineering, or chemical technology.
Here are the distinguished members who have been named CIC Fellows in 2016 by the CIC Fellowship Committee. Fellowships will be presented at the CSChE Awards Banquet.
Michael Cunningham, FCICQueen’s University
Michael Cunningham is a well-recognized world leader in the fields of polymer colloids and a pioneering
researcher in synthesis of nanoparticles by living radical polymerization. He was Canadian Society for Chemical Engi-
neering (CSChE) Director of Awards from 2006–2009 and a member of the Macromolecular Science and Engineering
Division executive for many years. Cunningham holds an Ontario Research Chair in Green Chemistry and Engineering
and has received CSChE’s Syncrude Canada Award and several teaching awards from Queen’s University.
Faisal Khan, FCICMemorial University of Newfoundland
Faisal Khan’s work focuses on process safety and risk management through the development of novel approaches,
models, and tools. He is department head of process engineering at Memorial University. Khan is an active
participant in the CSChE Process Safety Management Division (PSM). He helped develop the teaching module
for CSChE’s PSM Summer Institute, which promoted awareness among the faculty members of Canadian chemi-
cal engineering departments regarding the fundamentals of process safety and its inclusion in undergraduate and
graduate programs. He regularly offers short courses on process safety and risk engineering.
Handan Tezel, FCICUniversity of Ottawa
Handan Tezel is a full professor in the Department of Chemical and Biological Engineering at University of
Ottawa and an internationally recognized researcher as well as an award winning teacher. Her work is related to
adsorption and membrane processes with applications in sustainable development, renewable energy, bio-fuels,
environmental air and water pollution control, hydrocarbon and petrochemical industries, and thermal energy
storage for solar and waste heat applications. Tezel was vice-dean of Engineering at the University of Ottawa from
2010–2015. She has been active in CSChE activities since 1988, as Director of Conferences, as well as chair of the
2008 Canadian Chemical Engineering Conference held in Ottawa.
20
Keynote Lectures
Trish KerinInstitution of Chemical Engineers Safety Centre, Australia
Monday, October 17 • 8:00–9:00
Room 204A, Symposium: PSM6
Remembering the Past Shapes our Future
Amine A KamenUniversité McGill
Monday, October 17 • 9:20–10:00
Room 2101, Symposium: BBE3
Innovative Influenza Vaccines for Pandemic Situations
Robert FarrautoColumbia University, USA
Monday, October 17 • 14:00–14:40
Room 205A, Symposium: CCR1
Dual Function Adsorbent/Catalysts Materials for CO2 Capture and Conversion
Marianne FenechUniversity of Ottawa
Monday, October 17 • 14:00–14:40
Room 307B, Symposium: BME2
Experimental Techniques to Study the Blood Dynam-ics and the Blood Rheology in the Microcirculation
Alberto FerrerUniversitat Politècnica de València, Spain
Monday, October 17 • 14:00–14:40
Room 203, Symposium: SYC2
Future of Latent Variable Methods in the Process Industry
Krishnaswamy NandakumarLouisiana State University, USA
Monday, October 17 • 16:00–16:40
Room 206A, Symposium: CEF2
EPIC-Enabling Process Innovation through Computation
Coral LukaniukCanadian Energy Pipeline Association
Tuesday, October 18 • 8:00–9:00
Room 204A, Symposium: PSM2
A Changing Landscape: The Pipeline Industry in Canada
Giovanni FanchiniWestern University
Tuesday, October 18 • 8:10–8:50
Room 205A, Symposium: NNT1
Graphene Laminates and their Modification with Metallic Nanoparticles
Jeffrey GiacominQueen’s University
Tuesday, October 18 • 8:10–8:50
Room 206B, Symposium: RCF1
Exact Analytical Solution for Large-amplitude Oscillatory Shear Flow from Oldroyd 8-constant Model: Shear Stress
Angeliki LemonidouAristotle University of Thessaloniki, Greece
Tuesday, October 18 • 8:10–8:50
Room 207, Symposium: CCS1
Novel CO2 Capture Process for H2 Production Ca and Ni Chemical Loops
Mark UngrinUniversity of Calgary
Tuesday, October 18 • 8:10-8:50
Room 307B, Symposium: BME3
Microscale Tissue Engineering for Therapeutic Applications
All Keynote Lectures will be held in the Québec City Convention Centre.
21
Keynote Lectures
Cathleen CruddenQueen’s University
Tuesday, October 18 • 8:30–9:10
Room 205B, Symposium: SKS1
Organic Materials: Self Assembled Monolayers and Mesoporous Materials
Chris MoraesUniversité McGill
Tuesday, October 18 • 9:50–10:30
Room 307B, Symposium: BME3
Mechanosensors: Microengineered Probes to Measure 3D Tissue Mechanics
Daniel De Kee, FCICUniversity of Toronto
Tuesday, October 18 • 14:00–14:40
Room 2105, Symposium: PCS1
Research and Discontinuities in Rheology
Khaled BelkacemiUniversité Laval
Tuesday, October 18 • 16:00–16:40
Room 307A, Symposium: FOS1
Green Oleochemical Process Engineering of Non-edible Fats & Oils: Towards Improved Heterogeneously Catalyzed Metathesis
All Keynote Lectures will be held in the Québec City Convention Centre.
22
Exhibition Location and HoursQuébec City Convention Centre, Room 2000C
Sunday, October 16 • 19:00–22:00 Monday, October 17 • 09:30–19:30Tuesday, October 18 • 09:30–16:00
List of Exhibitors Organizations Booth Websites
1, 14 www.cheminst.ca
CRIBIQ 12 www.cribiq.qc.ca/en
exp 11 www.exp.com/en/home
Renishaw (Canada) Ltd. / ProSpect Scientific Inc. 4 www.renishaw.com
SCION Instruments Canada Limited 3 scioninstruments.com
Entrance Food &beverage
1 3 4 7
8111214Food &
beverage
Exhibition Floor Plan
Exhibition
The Chemical Institute of Canada (CIC) is the national, not-for-profit, umbrella organization for three constituent societies : the Canadian Society for Chemistry (CSC), the Canadian Society for Chemical Engineering (CSChE) and the Canadian Society for Chemical Technology (CSCT). Individual chemical scientists , engineers and technologists who join their constituent society are automatically members of the CIC. The CIC has nearly 6,000 members employed in, or associated with industry , government, academia and other organizations across Canada and around the world.
STAY CONNECTEDJOIN THE CANADIAN SOCIETY FOR CHEMICAL ENGINEERING.
www.cheminst.ca/membership
top related