6 - flexi edge bts licensed features & sw compatibility
Post on 16-Jan-2016
237 Views
Preview:
DESCRIPTION
TRANSCRIPT
1 © Nokia Siemens Networks Module 6 - Licensed Features&Software Compatibility / MNa / 2007-09-10Confidential – IPR applies
2 © Nokia Siemens Networks Module 6 - Licensed Features&Software Compatibility / MNa / 2007-09-10Confidential – IPR applies
Nokia Siemens Networks AcademyLegal notice
Intellectual Property RightsAll copyrights and intellectual property rights for Nokia Siemens Networks training documentation, product documentation and slide presentation material, all of which are forthwith known as Nokia Siemens Networks training material, are the exclusive property of Nokia Siemens Networks. Nokia Siemens Networks owns the rights to copying, modification, translation, adaptation or derivatives including any improvements or developments. Nokia Siemens Networks has the sole right to copy, distribute, amend, modify, develop, license, sublicense, sell, transfer and assign the Nokia Siemens Networks training material. Individuals can use the Nokia Siemens Networks training material for their own personal self-development only, those same individuals cannot subsequently pass on that same Intellectual Property to others without the prior written agreement of Nokia Siemens Networks. The Nokia Siemens Networks training material cannot be used outside of an agreed Nokia Siemens Networks training session for development of groups without the prior written agreement of Nokia Siemens Networks.
3 © Nokia Siemens Networks Module 6 - Licensed Features&Software Compatibility / MNa / 2007-09-10Confidential – IPR applies
Module 6Flexi EDGE BTS Licensed Features & SW Compatibility
4 © Nokia Siemens Networks Module 6 - Licensed Features&Software Compatibility / MNa / 2007-09-10Confidential – IPR applies
Module 6 – Flexi EDGE BTS Licensed Features & SW Compatibility
5 © Nokia Siemens Networks Module 6 - Licensed Features&Software Compatibility / MNa / 2007-09-10Confidential – IPR applies
Module 6 – Flexi EDGE BTS Licensed Features & SW CompatibilityAfter completing this module, the participant will be able to:
Theory:• List the supported Flexi EDGE BTS licensed features• Recognise different license types• Match the Flexi EDGE BTS features with the BSC and NetAct SW revisions
Practical:• Transfer licence files to the network element• Activate licenced features• Remove licences from the network element
6 © Nokia Siemens Networks Module 6 - Licensed Features&Software Compatibility / MNa / 2007-09-10Confidential – IPR applies
Overview of Flexi EDGE BTS license management
• Licence-based feature management means that the use of certain features is controlled by licences.• Licence management is handled in the BSC as in previous generation BTSsLicence types:• Capacity licence defines the allowed capacity that the feature can use or
provide. Capacity licences permit the capacity to be increased stepwise by installing more capacity licences i.e. capacity increments for the same feature(s). The capacities of these licences are then summed up to get the total capacity that the feature is allowed to use or provide.
• On/off licence (non-capacity feature licence) allows the feature to run without capacity limitations
Both licence types above can be time-limited. This means that the licence covering the feature has a pre-defined expiration date, which is stated in the licence file.
7 © Nokia Siemens Networks Module 6 - Licensed Features&Software Compatibility / MNa / 2007-09-10Confidential – IPR applies
Licensing features (1/2)
Licence Management by NetAct (1/2)• Licence order support• Licence file importing• Licence file distribution• Feature activation and deactivation (done automatically by some
NEs)
License Distribution
NetActNew License file
BTSBSC
RNCWBTS
Distributing to NEsLicence Delivery Sytem
8 © Nokia Siemens Networks Module 6 - Licensed Features&Software Compatibility / MNa / 2007-09-10Confidential – IPR applies
Licensing features (2/2)
Licence Management by NetAct (2/2)• Licence file deletion• Licence synchronization• Licence reporting• Licence expiration checking
License synchronization
NetAct
BTSBSC
RNCWBTS
Upload from NEs
Archive Directoryfor all Licence Files
9 © Nokia Siemens Networks Module 6 - Licensed Features&Software Compatibility / MNa / 2007-09-10Confidential – IPR applies
Licensed Flexi EDGE BTS features
In EP1:• Flexi EDGE TRX capacity management
– Name of the licence in the purchasing tool: ‘Flexi EDGE Operating SW’ (also known as ’Flexi EDGE TRX SW support’)
• Flexbus 2 interface on the FIFA card
In EP2:
• DPTRX i.e. Double Power TRX: DPTRX&2UD, DPTRX&4UD, IDD&2UD and IDD&4UD, Interference Rejection Combining (IRC)• Transmission features
10 © Nokia Siemens Networks Module 6 - Licensed Features&Software Compatibility / MNa / 2007-09-10Confidential – IPR applies
Flexi EDGE TRX capacity management
• Flexi EDGE BTS EP1 Software license management feature introduces BTS TRX capacity management based on the operator needs. This feature enables flexible usage of the base station in the network based on the capacity requirement.
• Each BSC has a pool of TRXs that can be allocated to its BTSs.If the required TRX cabling is already done in Flexi EDGE BTS, it is possible to take an extra (unused) TRX into service without a site visit.
• The usage of Flexi EDGE TRX software is controlled by a Flexi EDGE TRX capacity licence. The licence sets a limit for unlocked Flexi EDGE TRX count under a Flexi EDGE BTS. Operator cannot unlock or modify Flexi EDGE BTS without the licence.
• Each EXxA DTRX module provides two GSM/EDGE carriers. Each TRX within EXxA can be separately activated with the SW licence key -> one carrier increments possible.
11 © Nokia Siemens Networks Module 6 - Licensed Features&Software Compatibility / MNa / 2007-09-10Confidential – IPR applies
DPTRX management
• DPTRX feature will be supported in EP2.0 & BSS13.• DPTRX is a SW-licensed feature controlled by the BSC.
Description:• The amount of TRXs that can use Double Power TRX is licenced. Only the TRXs which
are unlocked (TRX operative state is something else than BL-USR) are counted. Double Power TRX feature is controlled by Double Power TRX for FlexiEDGE and Flexi EDGE TRX licenses, i.e. Flexi EDGE TRX licence is also needed for DPTRX to work.
• Double Power TRX for FlexiEDGE licence is checked in BCF, BTS and TRX unlock. • If the licence expires, Double Power TRX usage is still possible for a WO object – but no
new unlocks possible for TRXs which use Double Power TRX.• If Double Power TRX is used, max amount of TRXs in one Flexi EDGE BTS is reduced –
one DPTRX reduces the amount by one, two DPTRXs reduces the amount by two and so on.
• This licence covers DPTRX&2UD, DPTRX&4UD, IDD&2UD and IDD&4UD for DTRX configurations.
12 © Nokia Siemens Networks Module 6 - Licensed Features&Software Compatibility / MNa / 2007-09-10Confidential – IPR applies
Licensed transmission features
Licensed transmission features• Licensed Flexi EDGE BTS integrated transmission features will be supported in EP2.0.
Integrated transmission licenses other than MWR licenses will be managed in the BSC, but the configuration must be done locally at the BTS site.
• If the feature state is ON in Licence and Feature management in BSC, user is able to enable transmission features usage in BCF creation and modification by setting values of the new BCF parameters.
• Transmission interface units i.e. submodules start with basic functionality with two E1/ T1 interfaces or one Flexbus interface. Further functionality can be easily added later on by additional software licence. The protection of these functionalities will be integrated with the next software releases.
• The licenced features (SW licences) are:– Abis termination via Pseudo-wire Emulation (FlexiEDGE Abis over IP/ Ethernet)– Abis termination via E1/T1 in blocks of 2 (FlexiEDGE Additional 2 E1/T1)– Cross-connection (FlexiEDGE TRS Abis Grooming)– Loop Protection (FlexiEDGE TRS Loop Protection)– additional blocks of two E1/T1s– second Flexbus
13 © Nokia Siemens Networks Module 6 - Licensed Features&Software Compatibility / MNa / 2007-09-10Confidential – IPR applies
Activating and testing licensed Flexi EDGE BTS featuresOverview• A network operator who wants to acquire a licensed feature buys the licence,
installs it in the BSC can then activate the feature. One licence file may, in practice, cover one or more features.
• BSC controls that used capacities do not exceed the licenced capacities. Separate feature code for each feature is used.
• User can enable/disable each feature online separately for every BCF via MML/FBPP/Q3. BSC check if the feature state is on and feature has enough capacity in BCF creation and modification when the user tries to enable the feature.
• Configured capacity values for a BCF are stored into Radio Network Database in BSC. When user enables or disables the feature or changes the feature capacity, BSC updates the new values to BTS.
14 © Nokia Siemens Networks Module 6 - Licensed Features&Software Compatibility / MNa / 2007-09-10Confidential – IPR applies
Allowed values of licensed transmission features in EP2
Feature (SW licence) Capacity range Used licence capasity by
BCF
Abis termination via Pseudo-wire Emulation (FlexiEDGE Abis over IP/ Ethernet)
ON/OFF 1
Abis termination via E1/T1 in blocks of 2 (FlexiEDGE Additional 2 E1/T1)
1...3/OFF 1 per blocks of 2
Cross-connection (FlexiEDGE TRS Abis Grooming)
ON/OFF 1
Loop Protection (FlexiEDGE TRS Loop Protection)
ON/OFF 1
15 © Nokia Siemens Networks Module 6 - Licensed Features&Software Compatibility / MNa / 2007-09-10Confidential – IPR applies
Flexi EDGE TRX SW licence control in BSC
• The licence is a long term licence and it sets a limit for unlocked Flexi EDGE BTS TRX count.
• Operator cannot unlock or modify Flexi EDGE BTS without the licence. If the Flexi EDGE TRX licence does not exist or feature state is OFF, then Flexi EDGE-specific options are not shown to the user in MML commands.
– When the licence has expired, operator cannot unlock TRXs• If the user has had the licence in CONF or ON state and created Flexi EDGE
BTS, then Flexi EDGE-related parameters are shown to user even if the licencestate is OFF.
• BTS site type name used in MML commands is Flexi EDGE.
16 © Nokia Siemens Networks Module 6 - Licensed Features&Software Compatibility / MNa / 2007-09-10Confidential – IPR applies
Licence control in BSC
• BSC checks that the licence is valid and that operator cannot have more Flexi EDGE TRXs in use than the licence allows.
• Operator can also check the amount of Flexi EDGE TRXs that are in use.• The current capacity level usage is requested with service
fmn_capacity_usage_inquiry_as from BSC software that has registered itself as capacity manager (PUBDAT).
17 © Nokia Siemens Networks Module 6 - Licensed Features&Software Compatibility / MNa / 2007-09-10Confidential – IPR applies
Installing and activating licences
• Note: Do not change a bit in the licence file or it will not work!
• See the instructions in the Licensing in BSC and W7 - Licence and Feature Handling documents :
Licensing in BSC W7 - Licence and Feature Handling
18 © Nokia Siemens Networks Module 6 - Licensed Features&Software Compatibility / MNa / 2007-09-10Confidential – IPR applies
BSC MML commands for licence and feature handling
Licence and Feature Handling (W7) MML:
19 © Nokia Siemens Networks Module 6 - Licensed Features&Software Compatibility / MNa / 2007-09-10Confidential – IPR applies
Activating and testing licensed Flexi EDGE BTS features• Before you start, make sure the licence covering the feature has been installed
into BSC.• When installing the licence, the initial state of the feature should be set to
'CONF'.
20 © Nokia Siemens Networks Module 6 - Licensed Features&Software Compatibility / MNa / 2007-09-10Confidential – IPR applies
Licensing-related error codes in BSC S12
The following error codes are related to Flexi EDGE BTS licensing in BSC S12:
• FLEXI EDGE TRX CAPACITY LICENCE EXCEEDED• FLEXI EDGE TRX LICENCE NOT IN USE IN BSC
21 © Nokia Siemens Networks Module 6 - Licensed Features&Software Compatibility / MNa / 2007-09-10Confidential – IPR applies
Licensed operating SW in S12
22 © Nokia Siemens Networks Module 6 - Licensed Features&Software Compatibility / MNa / 2007-09-10Confidential – IPR applies
Flexi EDGE BTS EP1 SW Compatibility
Compatibility between Flexi EDGE BTS, BSC, NetAct, LMU and FIFA transmission submodule software
23 © Nokia Siemens Networks Module 6 - Licensed Features&Software Compatibility / MNa / 2007-09-10Confidential – IPR applies
Flexi EDGE BTS SW Compatibility
EP1.1• EP1.1 will be the second Flexi EDGE BTS SW feature release. Compatible with
BSC S12 ED2.1.
EP2• Flexi EDGE BTS EP2.0 release will be compatible with BSC S13 and NetAct
OSS4.2.
24 © Nokia Siemens Networks Module 6 - Licensed Features&Software Compatibility / MNa / 2007-09-10Confidential – IPR applies
Flexi EDGE BTS SW Release plan
• EP1 feature releaseCorrection deliveries released c. once in every three months
– EP1 CD1.0– EP1 CD2.0
• EP1.1 feature release• EP2 feature release
top related