3m textool test socket catalog
Post on 28-Mar-2016
249 Views
Preview:
DESCRIPTION
TRANSCRIPT
Multiple Use Flexibility in a High Performance Product The 3M Textool Flexible Array Solution for Test Sockets (FAST) is an adaptable
platform that meets the challenges of today’s testing and burning-in low volume/
high mix array packages or high volume/low mix functional testing. A FAST
socket is an upgradeable socket that helps protects a customer’s test board
investment by anticipating the next generation of integrated circuits (IC) pinouts
– by simply switching out the cartridge, test engineers can use existing equipment
and test boards, saving both time and money. Moreover, these innovative, custom-
designed sockets provide a highly flexible test and burn-in solution, which can
help reduce time-to-market for suppliers of ICs.
Increased Flexibility, Decreased Time and CostBy incorporating the FAST platform into test equipment, users experience greater
flexibility during the test process by taking advantage of the socket’s ability to
accommodate different IC package thicknesses and sizes, as well as ball pitches
and patterns. In addition, by incorporating FAST sockets as part of the initial
design foundation, IC suppliers can benefit by then reusing the same test boards for
future generation devices, which saves time and is cost effective.
3M™ Textool™ Flexible Array Solution for Test Sockets (FAST)
3M™ Flexible Array Solution for Test Sockets (FAST)
3M™ Pitch-Free Cartridges, made by PCB process
Key Advantages
3M™ Textool™ Flexible Array Solution for Test Sockets (FAST)
Modular cartridge construction• Accepts multiple cartridge designs
Accommodates different:• IC package thicknesses and sizes• Ball pitches and patterns• Non-standard or differing ball
pitches
Adaptable to many needs• Pitch conversions• Power and/or ground distribution• Power noise decoupling• Signal Integrity (SI) improvement
Incorporates cartridges made with 3M™ Embedded Capacitance Material (ECM) which addresses power supply noise and ground distribution issues• Lowers impedance of power
distribution system• Dampens board resonances• Reduces noise on power plane• Reduces radiated emissions
Important NoticeAll statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy orcompleteness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks andliability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained onyour purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIESINCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund thepurchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damagearising from this 3M product, regardless of the legal theory asserted.
3M and Textool are trademarks of 3M Company.
3
Electronic Solutions DivisionInterconnect Products6801 River Place Blvd.Austin, TX 78726-90001-800-225-5373www.3MTextool.com
Please recycle. Printed in USA© 3M 2011. All rights reserved.80-4000-7004-3
Upgradeability, flexibilityThe 3M™ Textool™ Flexible Array Solution for Test Sockets (FAST) allows a previous cartridge for larger
pitch package to be swapped out for a new cartridge with a similar pin pattern but reduced pitch compatible
with the new package.
Benefits:• Speed• Expense• Tooling• Sockets• Test boards
Thickness changeLow volume high mix testing!
3M™ Textool™ Open-Top Test and Burn-In Sockets for Ball Grid Array Packages
3Innovation
3M™ Textool™ Open-Top Sockets for BGA Packages
Table of Contents
Product Advantages .............................................................................................................1
Contact Durability ................................................................................................................1
Contact Reliability ...............................................................................................................2
Micro-Wiping and Solder Ball Deformation .......................................................................3
Package Alignment ..............................................................................................................4
Package Dimension Requirements ......................................................................................5
Socket Mechanism and Operating Instructions ...................................................................6
Ordering Information ...........................................................................................................8
3M Textool Open-Top BGA Sockets 0.65 mm ...................................................................9 3M Textool Open-Top BGA Sockets 0.80 mm ................................................................10 3M Textool Open-Top BGA Sockets 1.0 mm ..................................................................11 3M Textool Open-Top BGA Sockets 1.27 mm ................................................................12
For the most current product and technical information, click on the product names within this PDF, which will take you to the specific 3M Textool Test and Burn-In Sockets product page on the website.
1
First to market in 1992 with BGA sockets, 3M continues to expand our product range and available options. The versatile product design and four product platforms enable quick-turn and low cost proliferation of new sizes. 3M provides reliable performance for test and burn-in applications, with a proven design perfected with years of customer experience. 3M provides sockets for most types of BGA packages, standard or custom, in a variety of pitches, including 0.65 mm, 0.80 mm, 1.00 mm and 1.27 mm.
3M Textool Open-Top Test and Burn-in Sockets provide the following benefits:
Dual-Beam Contact Design• Minimizes ball deformation with low actuation force, minimal shear stress and contact points above center plane• Maximizes contact durability due to lower stress per contact beam• Enhances electrical reliability by expanding contact interface zone
Micro-Wiping Effect• Optimizes contact interface by removing oxide build-up• Minimizes solder transfer to contact tips
Open-Top Socket Design• Accommodates a wide range of package dimensions• Compatible with most automated device loaders• Enables easy manual operation with low actuation force• Can reduce lead time and cost with modular tooling and optimal footprint density
Global Support• Local sales and technical service personnel in all major markets worldwide• Design resources and materials expertise in both the United States and Japan• Quick-turn product samples shipped anywhere in the world• Website provides easy access to technical information worldwide
3M™ Textool™ Open-Top Sockets for BGA Packages
Closed Open
Force
Stress 3M
Stress A
G3M
GA
• Since both beams of the 3M contact are moving, each one only has to move G
3M/2.
• For a single beam contact to accommodate the same ball (G
3M= G
A ), one beam must cover the
entire gap, thus accelerating the force applied to the beam in motion as the contact travels.
• The added stress of additional travel in the single beam contact increases the likelihood of fatigue-related failures.
• The dual-beam motion of the 3M Textool socket contact prolongs socket mechanical life cycle, which may decrease total cost of ownership.
3M’s Dual-Beam Contact Motion
Single-Beam Contact Motion
3M Contact Durability3M’s dual-beam contact increases socket durability with its patented dual-beam motion.
2
3M™ Textool™ Open-Top Sockets for BGA Packages
Piercing Contact
• Encourages solder build-up over time, which in turn increases long-term electrical resistance and decreases reliability.
• Can reduce socket total life cycle and may increase total cost of ownership.
• Expensive cleaning and restoration procedures are sometimes necessary, requiring added cost and board downtime.
3M’s Dual-Beam Micro-Wiping Contact
• Provides larger contact area and micro-wiping motion to reduce solder build-up over time, thus maintaining long-term electrical resistance, increasing reliability and prolonging the life cycle of the socket.
• Can decrease total cost of ownership.
3MFlat Area Contact
Competition’sEdge Point Contact
# BI Cycles
Co
nta
ct R
esis
tan
ce
Concentrated contact point accumulates solder over time.
Contact Mark
Multiple Contact Points
It is difficult to accumulate solder on this larger area. Micro-wiping helps
keep contacting surfaces clean.
Competition’s Edge-Point Contact
3M Contact Reliability3M’s micro-wiping contact increases electrical reliability and is intended to decrease total cost of ownership.
3M’s Micro-Wiping Contact
Contact Mark
3
Micro-Wiping and Solder Ball Deformation
3M™ Textool™ Open-Top Sockets for BGA Packages
Contact MarkWith Micro-Wiping
Contact
Contact
Solder Ball
FREE STATE OPEN CLOSED
FR
FL
The 3M Textool Open-Top BGA Socket contact is designed to minimize deformation of the solder ball. This is achieved by means of a low-force, dual-beam design that touches the ball at two opposing points away from the BGA seating plane. The result is a system producing only minor indentations which have no effect on solder ball coplanarity.
1.0 mm Solder Ball Deformation After 24 Hours at 125°C
Note: FL = Force Left, FR = Force Right
Micro-Wiping
FR = FL
• The contact arms grasp the solder ball above its center. The shape of the contact arm exerts a component of the applied force in a downward direction, enhancing package retention.
• The dual-beam contact provides balanced forces, reducing the sheer stress on the solder ball.
Contact
Contact
Solder Ball
FR
1.27 mm 1.00 mm, 0.80 mm, 0.65 mm
1.27 mm Solder Ball Deformation After 48 Hours at 125°C
Contact MarkWith Micro-Wiping
FL
4
3M™ Textool™ Open-Top Sockets for BGA Packages
Loading SequenceSee Illustration Below
1. The top cover is pushed down until fully depressed.
2. The downward motion of the top cover is translated to lateral motion bringing the package guides to the loading position. Concurrently, the nest combs move to open the contact arms to the open position.
3. A BGA package is loaded between the guides to achieve proper alignment of solder balls with socket contacts.
4. Raised features on the nest serve as physical stops that control package entry to the correct depth for proper socket operation.
Socket ConstructionPackage Alignment
Top Cover
Top Cover
Package Guide
Package
Package Stop
Contact
Nest Comb
Nest Comb Nest (2)
Lever (2)
Base
Alignment Plate
Contacts
Package Guide
Package Stop (4)
Retainer Clip (2)
5
3M™ Textool™ Open-Top Sockets for BGA Packages
BGA packages are available from multiple sources in a wide variety of designs, materials, body sizes, matrices, pin pattern configurations, pitches and thicknesses. To assure proper mating of package to socket and reliable socket performance, all package parameters must be precisely specified and the corresponding socket feature designed to match the package specification. To properly select or design a socket, the following package dimensions must be specified accurately.
Contact Gap Adjustment3M Textool Open-Top BGA Sockets are designed to function with common solders under normal production burn-in conditions. In addition, for customers using eutectic solder-balls in long-term testing and/or high-stress environments such as “life testing” and “HAST,” 3M can customize sockets to control solder ball deformation by making an adjustment of the socket contact gap. This adjustment is called “custom gapping” and is based on actual measurement of BGA samples that are provided by the customer. This disclaimer is intended to cover eutectic and other low melt-point solder applications only. Higher melt-point solders, such as 90/10 and lead-free, do not require custom gapping. Please contact 3M Customer Service with your specific needs and conditions. Custom gapping tailors the socket for an exact solder ball diameter and should only be considered for stable production applications where solder ball dimensions are not expected to vary.
BGA Packages and Relation to Socket
D
D 1 ZD
ø be
e
E E1
ZE
A
A2
A1
D2
E2
D2
E2
D3
E3
DE
D2
E2
Tapered Edge
Square Edge
Essential BGA Package Dimensions
±
±
±
±
±
±
±
±
±
±
±
±
±
Overall Height
Substrate Thickness
Ball Diameter
Dimensions
D
E
E1
MD
e
n
ME
ZD
ZE
D1
E2
D2
A
A2
Total Pitch
Minimum Mold Cap(If Retainer Clip is Used)
E3
D3Maximum Mold Cap(If Retainer Clip is Used)
Number of Rows
Number of Balls
Ball Pitch
Pattern Need Pattern Drawing
Package Overhang
Ball Height A1
Body Size
ob
If retainer clip is specified, style of clip depends on package profile. The dimensions D2 & E2 and D3 & E3
noted at right are required to select the proper clip design.
Note: To assure proper match of socket to package, the preferred information is the latest revision of the customer package drawing. The package drawing should contain all of the information in the above table. Send the current package drawing to 3M Customer Service.
6
3M™ Textool™ Open-Top Sockets for BGA Packages
Socket Mechanism and Operating Instructions
Stage 1Free State. Socket, with normally closed contacts, in free state, ready for actuation.
Stage 2Contacts Open. A downward force is applied to the top plate, which translates to a lateral motion of the nest combs, and opens the contacts to receive the solder ball.
Note: Depress top cover before inserting package.
3/TEXTOOL
BGA Package
Contact
Base Plate
Nest-2Nest-1 Nest-2
3/TEXTOOL
Solder Ball
7
3M™ Textool™ Open-Top Sockets for BGA Packages
3/TEXTOOL
Socket Mechanism and Operating Instructions
Stage 4The vertical actuation force is removed, the contacts close and each ball is gripped above its horizontal center.
Stage 3A BGA device is placed into the top opening. Alignment features guide the package into proper position so each ball rests between the open contact arms.
3/TEXTOOL
ZIF(Zero Insertion Force)
8
3M™ Textool™ Open-Top Sockets for BGA Packages
Socket Part Numbering System
3/TEXTOOL
Optional Package Retainer Optional Length of
Contact Tail
Optional Board Locating Post on Alignment Plate (2)
Optional Board Locating Post on Socket Base (2)
2 X X X - 9 X X X - X X - X X X 1Material Type1 = PES/BeCu/Au
Solder Tail Length(Available options vary by pitch)
Retainer4 = Without (Standard for 1.0 mm and 1.27 mm)5 = With (Standard for 0.65 mm and 0.80 mm)
Board Locating Post0 = Without1 = With (Both Alignment Plate and Base)2 = With (Alignment Plate Only)3 = With (Base Only)
Product Series Number
Product Platforms0 = Type-01 = Type-I
2 = Type-II3 = Type-III
Package Size/Matrix Variation
Pin Count
Product Variation(3M Assigned)
Ordering Information1. Submit your detailed package drawing to 3M Customer
Service.2. Specify optional features desired: • With or without board locating posts • With or without retainer3. 3M Customer Service will assign complete part
number.
Retainer Clip Feature3M Textool sockets are designed to function properly without the use of retainer clips. The retainer clip feature is desirable for high vibration/shock applications and with small or non-spherical solder balls or to serve as a visual aid during package loading. The purpose of the retainer clip feature is to retain the DUT in the socket should there be an event or conditions leading to dislodgement of the solder balls from the socket contacts. Retainer clips are custom-designed based on specific package dimensions and should only be considered for stable production applications where package dimensions are not expected to vary. In cases of non-spherical and small solder balls, 3M Technical Service may request package samples for fit analysis.
Socket Options
9
Note: Contact 3M Customer Service Rep or 3M Authorized Distributor for information on sizes not listed on the above chart. Contact patterns can be customized to match the package.
Socket Type Series Number Package Body Size (mm) Matrix Count Maximum Pin Count I 9610 8x8 10x10 100 9611 8x8 11x11 121 9612 9x9 12x12 144 9613 9x9 13x13 169 9614 10x10 13x13 169 9615 10x10 14x14 196 9616 11x11 15x15 225 9617 11x11 16x16 256 9618 12x12 16x16 256 9619 12x12 17x17 289 II 9671 9x9 13x13 169 9620 13x13 18x18 324 9621 13x13 19x19 361 9670 13x13 20x20 400 9622 14x14 19x19 361 9623 14x14 20x20 400 9625 15x15 20x20 400 9624 15x15 21x21 441 9672 15x15 22x22 484 9626 16x16 22x22 484 9627 16x16 23x23 529 9628 17x17 24x24 576 9629 17x17 25x25 625
3M™ Textool™ Open-Top BGA Sockets 0.65 mm
BGA 0.65 mm Pitch Socket Platforms
BGA 0.65 mm Pitch Socket Available Package Guide Sizes
*Note: At time of publication, Type III was not released for sale. Please contact 3M Customer Service for current availability.
Type Maximum Body Size (mm) Maximum Matrix Maximum Ball Count Status I 12x12 17x17 289 Available II 17x17 25x25 625 Available III 21x21 31x31 961 Inquire*
In an effort to better serve our customers, 3M continually updates our technical documents.
Please visit our website for the most up-to-date technical information.
www.3M.com/electronics
10
In an effort to better serve our customers, 3M continually updates our technical documents.
Please visit our website for the most up-to-date technical information.
www.3M.com/electronics
3M™ Textool™ Open-Top BGA Sockets 0.80 mm
Type Maximum Body Size (mm) Maximum Matrix Maximum Ball Count Status I 12x12 13x13 169 Available II 17x17 19x19 361 Available III 21x21 25x25 625 Available IV 24x24 31x31 961 Inquire*
Socket Type Series Number Package Body Size (mm) Matrix Count Maximum Pin Count I 9014 9x9 9x9 81 9015 9x9 10x10 100 9016 10x10 10x10 100 9017 10x10 11x11 121 9016 10x10 12x12 144 9018 11x11 11x11 121 9019 11x11 12x12 144 9018 11x11 13x13 169 9010 12x12 13x13 169 II 9026 12x12 14x14 196 9027 13x13 14x14 196 9028 13x13 15x15 225 9029 14x14 15x15 225 9020 14x14 16x16 256 9029 14x14 17x17 289 9021 15x15 16x16 256 9022 15x15 17x17 289 9021 15x15 18x18 324 9023 16x16 18x18 324 9024 16x16 19x19 361 9025 17x17 19x19 361 III 9030 17x17 20x20 400 9031 18x18 20x20 400 9032 18x18 21x21 441 9031 18x18 22x22 484 9033 19x19 21x21 441 9034 19x19 22x22 484 9033 19x19 23x23 529 9035 20x20 23x23 529 9036 20x20 24x24 576 9037 21x21 24x24 576 9038 21x21 25x25 625
BGA 0.80 mm Pitch Socket Platforms
BGA 0.80 mm Pitch Socket Available Package Guide Sizes
Note: Contact 3M Customer Service Rep or 3M Authorized Distributor for information on sizes not listed on the above chart. Contact patterns can be customized to match the package.
11
3M™ Textool™ Open-Top BGA Sockets 1.0 mm
Socket Type Series Number Package Body Size (mm) Matrix Count Maximum Pin Count 0 9342 6x6 6x6 36 9348 11x11 10x10 100 9340 12x10 10x8 80 9300 12x12 11x11 121 9301 13x13 11x11 121 9302 13x13 12x12 144 9303 14x14 12x12 144 9304 14x14 13x13 169 9305 15x15 13x13 169 9306 15x15 14x14 196 9307 17x17 15x15 225 9308 17x17 16x16 256 9344 18x12 16x10 160 9343 18x18 15x15 225 9309 19x19 17x17 289 I 9352 14x10 13x9 117 9355 15x15 14x14 196 9356 17x17 15x15 225 9357 17x17 16x16 256 9358 19x19 17x17 289 9310 19x19 18x18 324 9311 21x21 19x19 361 9312 21x21 20x20 400 9313 23x23 21x21 441 9314 23x23 22x22 484 9315 25x25 23x23 529 9316 25x25 24x24 576 9317 27x27 25x25 625 9318 27x27 26x26 676 9319 29x29 27x27 729 II 9360 29x29 28x28 784 9320 31x31 29x29 841 9321 31x31 30x30 900 9322 33x33 31x31 961 9323 33x33 32x32 1024 9324 35x35 33x33 1089 9325 35x35 34x34 1156 9326 37.5x37.5 36x36 1296 9327 37.5x37.5 37x37 1369 9328 40x40 38x38 1444 9329 40x40 39x39 1521 III 9331 42.5 41 1681 9332 42.5 42 1764 9333 45 43 1849 9334 45 44 1936 9335 47.5 45 2025
BGA 1.0 mm Pitch Socket Platforms
BGA 1.0 mm Pitch Socket Available Package Guide Sizes
Note: Contact 3M Customer Service Rep or 3M Authorized Distributor for information on sizes not listed on the above chart. Contact patterns can be customized to match the package.
Type Maximum Body Size (mm) Maximum Matrix Maximum Ball Count Status 0 19x19 17x17 289 Available I 29x29 27x27 729 Available II 40x40 39x39 1521 Available III 45x45 45x45 2025 Available
In an effort to better serve our customers, 3M continually updates our technical documents.
Please visit our website for the most up-to-date technical information.
www.3M.com/electronics
12
3M™ Textool™ Open-Top BGA Sockets 1.27 mm
Socket Type Series Number Package Body Size (mm) Matrix Count Maximum Pin Count II 9222 29 x 29 21 x 21 441 9223 29 x 29 22 x 22 484 9224 31 x 31 23 x 23 529 9225 31 x 31 24 x 24 576 9226 33 x 33 24 x 24 576 9227 33 x 33 25 x 25 625 9228 35 x 35 26 x 26 676 9229 35 x 35 27 x 27 729 III 9232 37.5 x 37.5 28 x 28 784 9233 37.5 x 37.5 29 x 29 841 9234 40 x 40 30 x 30 900 9235 40 x 40 31 x 31 961 9236 42.5 x 42.5 32 x 32 1024 9237 42.5 x 42.5 33 x 33 1089 9238 45 x 45 34 x 34 1156 9239 45 x 45 35 x 35 1225
BGA 1.27 mm Pitch Socket Platforms
BGA 1.27 mm Pitch Socket Available Package Guide
*Note: At time of publication, Type I was not released for sale. Please contact 3M Customer Service for current availability.
Note: Contact 3M Customer Service Rep or 3M Authorized Distributor for information on sizes not listed on the above chart. Contact patterns can be customized to match the package.
Type Maximum Body Size (mm) Maximum Matrix Maximum Ball Count Status II 35x35 27x27 729 Available III 45x45 35x35 1225 Available
In an effort to better serve our customers, 3M continually updates our technical documents.
Please visit our website for the most up-to-date technical information.
www.3M.com/electronics
3M and Textool are trademarks of 3M.
3Electronics6801 River Place Blvd.Austin, TX 78726-9000www.3M.com/electronics1-800-225-53731-800-932-9373 (fax) © 3M 2005
Important NoticeAll statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.
Type II
1.27 mm
Type III
1.00 mm
Type 0
Type II
.65 mm
Type II
.80 mm
Type II
Type I
Type III
Type I
• Accommodates a wide range of package thicknesses without requiring socket adaptations.• Allows excellent air flow around device.• Includes a retractable locating guide for easy board mounting, even with hundreds of leads.• Compatible with most robotic handlers.• Easy manual operation.• Double beam contact delivers balanced, opposing forces to solder ball with minimal shear stress.• Contact tips touch ball above its center plane, producing only slight indentations and negligible ball deformation.• Package Retainer Option• At user’s request, sockets can be equipped with mechanical package retainers. This option provides additional holddown protection for high shock or vibration environments.
3M Electronic & Interconnect Solutions Division6801 River Place Blvd.Austin, TX 78726-9000
3M™ Textool™ 0.65 mm pitch, Open Top, BGA Test & Burn-In Sockets
34
Date Issued: December 13, 2002TS-9600-02Sheet 1 of 2
Physical
Electrical
Environmental
Mechanical
Operating Temperature Rating: - 55 °C to + 150 °C
For technical, sales or ordering information call 800-225-5373or visit our website: www.3M.com/eisd
Type II
Body: Material: Polyethersulfone (PES) Flammability: UL 94V-0 Color: Black Contact: Material: Beryllium Copper Plating: Gold over NickelOther Metal Parts: Stainless Steel Marking: 3M Logo/Textool
Insulation Resistance: >1000MΩ at 100 VdcDielectric Withstanding Voltage: 100 Vrms at Sea Level Initial Contact Resistance: <50mΩ measured at 1.0 mA applied current Current Rating: 0.5 A max @ 25°C
Durability: 20,000 actuations (10,000 devices load/unload) at room temperature Initial Contact Force: 8.5gf (0.087N) Nom for 0.4 mm diameter solder ball Initial Operating Force: Type II – 5Kg Max @ Full Pin Count Contact Wiper Gap - Fully Open: 0.55 mm Nom
TS-9600-02Sheet 2 of 2
3M™ Textool™ 0.65 mm pitch, Open Top, BGA Test & Burn-In SocketsType II
.0
0.13
.00
0.25
Dimensions inMillimeters
Tolerance
Dimension
*For 1.6 mm thick PCB, use self-tapping, STN.STL. screws size M2 x 4.0 mm long. For other PCB thicknesses, contact 3M or your preferred 3M Distributor.
0.5Standoffs
15.8
38.0
38.033.00 ± 0.10
33.00 ± 0.10
22.00 ± 0.10
22.00 ± 0.10
0.65 ± 0.05Pitch 0.65 ± 0.05
Pitch
15.60± 0.10
Max Matrix
15.60± 0.10
Max Matrix
24.0
24.0
OptionalPCB LocatingPosts
Package Outline
0.65Pitch
0.12 x 0.15Contact Tail
2.0Contact Tail
8.3 Pkg Seating Plane
4X 1.50Alignment Posts
PCB HOLE PATTERN
OptionalPackage Retainers
2X Ø 1.55 - 1.60For Locating Posts on Socket Alignment Plate
2X Ø 2.20 - 2.30For Mounting Screws (*)
2X Ø 2.10 - 2.18For Optional Locating Posts on Socket Base
625X Ø 0.22 MinContact Hole
Ordering InformationPACKAGE SPECIFICATIONS
Max Package Size
Max Matrix
Ball Diameter
25 x 25 Max
0.35 - 0.45 mm Min
Ball Height 0.30 mm Min
P.C.B. RECOMMENDATIONS
Board Thickness
Through Hole Diameter
17.0 0.10 mm SQ Max
1.6 mm
0.22 mm Min
3M Electronic & Interconnect Solutions Division6801 River Place Blvd.Austin, TX 78726-9000
For technical, sales or ordering information call 800-225-5373or visit our website: www.3M.com/eisd
3
Interconnect Solutionshttp://www.3M.com/interconnects/
3M is a trademark of 3M Company.For technical, sales or ordering information call
800-225-5373
3M™ Textool™ Test & Burn-In Ball Grid Array Sockets0.80 mm pitch, Types I, II, III and IV 9000 Series
Physical
Electrical
Environmental
Mechanical
Textool is a trademark of 3M company.
Body Material: Polyethersulfone (PES)Body Flammability: UL 94V-0
Body Color: BlackAlignment Plate Material: Liquid Crystal Polymer (LCP)
Alignment Plate Flammability: UL 94V-0 Alignment Plate Color: Black
Contact Material: Beryllium CopperContact Plating: 30µ" [ 0.76 µm ] Gold over 50µ" [ 1.27 µm ] Nickel
Other Metal Parts: Stainless SteelMarking: 3M Logo/Textool
Current Rating: 0.5 A max at 25°CInitial Contact Resistance: <50 mΩ measured at 1.0 mA applied current
Insulation Resistance: >700 MΩ at 500 VDC
Withstanding Voltage: 500 VRMS at sea level
Operating Temperature Rating: -55°C to +150°C
Durability: 20,000 actuations (10,000 devices load/unload) at room temperature
Initial Contact Force: 12 gf [ 0.12N ] normal for 0.4 mm diameter solder ball15 gf [ 0.15N ] normal for 0.5 mm diameter solder ball
Initial Actuation Force:Type I-3 Kg max at full pin countType II-5 Kg max at full pin countType III-7 Kg max at full pin countType IV-11 Kg max at full pin count
Contact Wiper Gap - Fully Open: 0.65 mm normal
TS-9000-05Sheet 1 of 3
Date Modified: March 9, 2007
• Double-beam normally-closed contact delivers balanced, opposing forces to solder ball with minimal shear stress
• Contact tips touch ball above its center plane moving ball deformation away from seating plane
• Designed to allow excellent air flow around device
• Includes a retractable locating guide for easy board mounting even with hundreds of leads
• Compatible with most robotic handlers• Helps provide easy manual operation• See Regulatory Information Index (RIA) for
chemical compliance information
3
Interconnect Solutionshttp://www.3M.com/interconnects/
3M is a trademark of 3M Company.For technical, sales or ordering information call
800-225-5373
3M™ Textool™ Test & Burn-In Ball Grid Array Sockets0.80 mm pitch, Types I, II, III and IV 9000 Series
TS-9000-05Sheet 2 of 3
Type I, II and III
Dimension Type I Type II Type III
Dim. A 33.00 40.00 45.00Dim. B 27.00 32.00 37.00Dim. C 17.00 21.00 26.00Dim. D 33.00 40.00 45.00Dim. E 17.00 21.00 26.00Dim. F 26.00 33.00 38.00Dim. G 15.00 20.00 25.00Dim. H 26.00 33.00 38.00Dim. I 15.00 20.00 25.00Dim. J 9.60 14.40 19.20Dim. K 9.60 14.40 19.20
Dim. A
Dim. D
Dim. BDim. C
Dim. E
Dim. G ± 0.10
Dim. F ± 0.10
Dim. I± 0.10
Dim. H± 0.10
17.30
9.70 Seating Plane
1.50
2.50 Contact Tail
0.80 Pitch
Optional PCBLocating Posts
Package Outline
Dia. 1.50
0.15 x 0.22 Contact Tails
2XXX-90XX
/ TEXTOOL
2XØ2.00 Guide Hole for Automatic Loader/ Unloader
Optional Package Retainers
Dim. J± 0.10
Dim. K± 0.10
0.80 ± 0.05Pitch Typ.
0.80 ± 0.05Pitch Typ.
2XØ2.20 Min.For Optional
Mounting Screws
4XØ1.60 Min.For Optional PCB
Locating Posts
Ø0.30 Min.Contact Hole
C of MatrixL
C of MatrixL
C of MatrixL
C of MatrixL
PCB Hole Pattern
0.55 Standoffs
Note: For package specifications and P.C.B. recommendations, see table on sheet 3.
3
Interconnect Solutionshttp://www.3M.com/interconnects/
3M is a trademark of 3M Company.For technical, sales or ordering information call
800-225-5373
3M™ Textool™ Test & Burn-In Ball Grid Array Sockets0.80 mm pitch, Types I, II, III and IV 9000 Series
TS-9000-05Sheet 3 of 3
Type IV
Max. PackageSize
Max.Matrix
BallDiameter
BoardThickness
Through Hole
Diameter
I 12.0 ± 0.1 SQ Max. 13 x 13 Max. 0.35 - 0.55 0.8 - 1.6 0.30 Min.
II 17.0 ± 0.1 SQ Max. 19 x 19 Max. 0.35 - 0.55 0.8 - 1.6 0.30 Min.
III 21.0 ± 0.1 SQ Max. 25 x 25 Max. 0.35 - 0.55 0.8 - 1.6 0.30 Min.
IV 27.0 ± 0.1 SQ Max. 31 x 31 Max. 0.35 - 0.55 0.8 - 1.6 0.30 Min.
Type
Package Specifications P.C.B. Recommendations
2 XXX - 90 X X - XX - X X X 1
Board Locating Post:0 = Without1 = With (Both alignment plate & base)2 = With (Alignment plate only)3 = With (Base only)
Ordering Information(RIA E1 & C1 apply)
Pin CountProduct Series
Matrix Pattern Variation:(Assigned by 3M)
Product Platforms:1 = Type I2 = Type II3 = Type III4 = Type IV Product Variation:
(Assigned by 3M)
Solder Tail Length:0 = 2.50 [0.10] (Standard)1 = 1.00 [0.04]
Retainer:4 = Without (Standard)5 = With
Material Type:1 = PES/BeCu/Au
19.01 9.70 Seating Plane
1.50
2.50 Contact Tail
0.80 Pitch
Package Outline
Dia. 1.50
0.15 x 0.22 Contact Tails
2XXX-904X-XX-XX01
/ TEXTOOL
0.80 ± 0.05Pitch Typ.
0.80 ± 0.05Pitch Typ.
48.00
48.00
33.01
33.00
43.00 ± 0.10
43.00 ± 0.10
24.00 ± 0.10
32.00± 0.10
2XØ2.10 For Base Locating Post
2XØ2.10For Screw
32.00 ± 0.10
24.00± 0.10
2XØ1.60 For Alignment
Plate Locating PostØ0.30 Min.
Contact Hole
PCB Hole Pattern
C of MatrixL
C of MatrixL
C of MatrixL
C of MatrixL
Optional Package Retainers
Optional PCBLocating Posts
0.55 Standoffs
3M
Interconnect Solutionshttp://www.3M.com/interconnects/
3M and Textool are trademarks of 3M Company.For technical, sales or ordering information call
800-225-5373
3M™ Textool™ BGA Test & Burn-In Sockets1.00 mm, Types 0, I, II and III Open Top
Physical
Electrical
Environmental
Mechanical
* RoHS = Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment"RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values
in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalentchromium, polybrominated biphenyls or prolybromianted diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing,
this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M.
Body Material: Polyethersulfone (PES)Flammability: UL 94V-0
Color: BlackAlignment Plate Material: Liquid Crystal Polymer (LCP)
Flammability: UL 94V-0Color: Black
Contact Material: Beryllium CopperPlating: 30µ" (0.76 µm) Gold over 50µ" (1.3 µm) Nickel
Other Metal Parts: Stainless Steel
Insulation Resistance: >1000MΩ at 500 VdcWithstanding Voltage: 500 Vrms at sea level
Initial Contact Resistance: <50mΩ measured at 1.0 mA applied currentCurrent Rating: 1.0 A max @ 25°C
Operating Temperature Rating: -55°C to +150°C
Durability: 20,000 actuations (10,000 devices load/unload) at room temperature
Initial Contact Force: 17 gf (0.17N) Nom for 0.6 mm diameter solder ball14 gf (0.14N) Nom for 0.5 mm diameter solder ball
Initial Actuation Force: Type II-5Kgf @ full pin countContact Wiper Gap - Fully Open: 0.85 mm Nom
TS-9300-08Sheet 1 of 5
Date Modified: June 16, 2005
• Double-beam normally-closed contact delivers balanced, opposing forces to solder ball with minimal shear stress
• Contact tips touch ball above its center plane producing only slight indentations and minimal ball deformation
• Allows excellent air flow around device• Includes a retractable locating guide for easy
board mounting even with hundreds of leads• Compatible with most robotic handlers while it
provides easy manual operation• Accepts package body sizes up to 29 mm square
with a maximum matrix of 27 x 27• RoHS* compliant
3M
Interconnect Solutionshttp://www.3M.com/interconnects/
3M and Textool are trademarks of 3M Company.For technical, sales or ordering information call
800-225-5373
3M™ Textool™ BGA Test & Burn-In Sockets1.00 mm, Types 0, I, II and III Open Top Type 0
Package SpecificationsMax Package Size: 19.0 mm ± 0.1 mm SQ Max
Max Matrix: 17 × 17Ball Diameter: 0.40 mm - 0.70 mm
Ball Height: 0.40 mm MinP.C.B. Recommendations
Board Thickness: 1.6 mmThrough Hole Diameter 0.35 mm Min
TS-9300-08Sheet 2 of 5
3M
Interconnect Solutionshttp://www.3M.com/interconnects/
3M and Textool are trademarks of 3M Company.For technical, sales or ordering information call
800-225-5373
3M™ Textool™ BGA Test & Burn-In Sockets1.00 mm, Types 0, I, II and III Open Top Type I
Package SpecificationsMax Package Size: 29 mm ± 0.1 mm SQ Max
Max Matrix: 27 × 27 MaxBall Diameter: 0.40 mm - 0.70 mm
Ball Height: 0.40 mm MinP.C.B. Recommendations
Board Thickness: 1.6 mmThrough Hole Diameter 0.35 mm Min
TS-9300-08Sheet 3 of 5
3M
Interconnect Solutionshttp://www.3M.com/interconnects/
3M and Textool are trademarks of 3M Company.For technical, sales or ordering information call
800-225-5373
3M™ Textool™ BGA Test & Burn-In Sockets1.00 mm, Types 0, I, II and III Open Top Type II
Package SpecificationsMax Package Size: 40.0 mm ± 0.1 mm SQ Max
Max Matrix: 39 × 39Ball Diameter: 0.40 mm - 0.70 mm
Ball Height: 0.40 mm MinP.C.B. Recommendations
Board Thickness: 1.6 mmThrough Hole Diameter 0.35 mm Min
TS-9300-08Sheet 4 of 5
1521 Ø 0.35 MinContact Hole
3M
Interconnect Solutionshttp://www.3M.com/interconnects/
3M and Textool are trademarks of 3M Company.For technical, sales or ordering information call
800-225-5373
3M™ Textool™ BGA Test & Burn-In Sockets1.00 mm, Types 0, I, II and III Open Top Type III
TS-9300-08Sheet 5 of 5
Package SpecificationsMax Package Size: 47.5 mm ± 0.1 mm SQ Max
Max Matrix: 45 × 45Ball Diameter: 0.50 mm - 0.70 mm
Ball Height: 0.40 mm MinP.C.B. Recommendations
Board Thickness: 1.6 mmThrough Hole Diameter 0.35 mm Min
3M™ Textool™ 1.27 mm pitch, Open Top, BGA Test & Burn-In Sockets
34
Date Issued: December 13, 2002TS-9200-07Sheet 1 of 3
Physical
Electrical
Environmental
Mechanical
Operating Temperature Rating: - 55 °C to + 150 °C
• Double-beam, normally-closed contact delivers balanced, opposing forces to solder ball with minimal shear stress. Includes unique Micro- wiping effect• Contact tips touch ball above it's center plane producing only slight indentations and minimal ball deformation. • Allows excellent air flow around device. • Includes a retractable locating guide for easy board mounting even with hundreds of leads. • Compatible with most robotic handlers while it provides easy manual operation.
Type Device Size Matrix
II 35mm Square 27 X 27
III 45mm Square 35 X 35
Types II, III
Body: Material: Polyethersulfone (PES) Flammability: UL 94V-0 Color: Black Alignment Plate: Material: Liquid Crystal Polymer (LCP) Flammability: UL 94V-0 Color: Black Contact: Material: Beryllium Copper Plating: Other Metal Parts: Stainless Steel Marking: 3M Logo/Textool
Insulation Resistance: >1000MΩ at 500 VdcDielectric Withstanding Voltage: 500 Vrms at Sea Level Initial Contact Resistance: <50mΩ measured at 1.0 mA applied current Current Rating: 0.5 A max @ 25°C
Durability: 20,000 actuations (10,000 devices load/unload) at room temperature. Initial Contact Force: 17gf (0.17N) Nom Initial Actuation Force: Type II – 2.5Kg Max @ 352 pin count 3.8Kg Max @ 480 pin count Type III – 7Kg Max @ 540 pin count 3.8Kg @ 900 pin countContact Wiper Gap - Fully Open: 1.05mm Nom
30 µ" (0.76 µm) Gold over 50 µ" (1.3 µm) Nickel
3M Electronic & Interconnect Solutions Division6801 River Place Blvd.Austin, TX 78726-9000
For technical, sales or ordering information call 800-225-5373or visit our website: www.3M.com/eisd
Ordering Information
TS-9200-07Sheet 2 of 3
3M™ Textool™ 1.27 mm pitch, Open Top, BGA Test & Burn-In SocketsType II
PACKAGE SPECIFICATIONS
Max Package Size
Max Matrix
Ball Diameter
27x27
0.75 ± 0.10 mm
P.C.B. RECOMMENDATIONS
Board Thickness
Through Hole Diameter
35.0 ± 0.2 mm SQ Max
1.6 mm
0.50 mm Min
56.7
41.0
OptionalPackage Retainers
56.7
48.70
41.0
2X Ø 2.00Guide Holefor automatic loader/unloader
45.00±0.05
52.50±0.10
38.40±0.05
1.27 ±0.05Pitch
1.27 ±0.05Pitch
45.00 ±0.05
52.50 ±0.10
38.40 ±0.05 729x .05 mmContact HoleMin Diameter
33.02±0.10
Max Matrix
33.02±0.10
Max Matrix
2X Ø 2.00 Min
2X Ø 1.60 Minfor optionalPCB LocatingPosts
4X Ø 2.50 Minfor optionalMounting Screws*
PCB HOLE PATTERNPackage Outline
18.0
0.5Standoffs
OptionalPCB LocatingPosts
1.27Pitch
0.15 x 0.28Contact Tails
1.502.4Contact Tail
8.20Seating Plane
*For 1.6 mm thick PCB, use self-tapping, STN.STL. screws size M2 x 5.0 mm long. For other PCB thicknesses, contact 3M or your preferred 3M Distributor.
.0
0.13
.00
0.25
Dimensions inMillimeters
Tolerance
Dimension
3M Electronic & Interconnect Solutions Division6801 River Place Blvd.Austin, TX 78726-9000
For technical, sales or ordering information call 800-225-5373or visit our website: www.3M.com/eisd
Ordering Information
TS-9200-07Sheet 3 of 3
3M™ Textool™ 1.27 mm pitch, Open Top, BGA Test & Burn-In SocketsType III
0.50 mm Min
35x35 Max
1.6 mm
0.75 ± 0.10 mm
P.C.B. RECOMMENDATIONS
PACKAGE SPECIFICATIONS
45.0 ± 0.2 mm SQ Max Max Package Size
Max Matrix
Ball Diameter
Board Thickness
Through Hole Diameter
69.1
60.0
51.2
69.1
51.2
2X Ø 2.00Guide Hold for AutomaticLoader /Unloader
OptionalPackage Retainers
58.00
50.80
58.00± 0.05
± 0.05
± 0.05
± 0.05
± 0.05
± 0.05
64.80 ± 0.10
± 0.05
64.80± 0.10
50.80
Max Matrix
43.18Pitch
1.27± 0.05
PCB HOLE PATTERN
2X Ø 2.00 MinOptional
2X Ø 1.60 MinFor Locating Posts1225X 0.50mm Min
Contact Hole
Max Matrix43.18
Pitch1.27
20.5
Standoffs0.8
OptionalPCB LocationsPosts
Pitch1.27 Contact Tails
0.15 X 0.28
Contact Tail2.40
Seating Plane8.20
1.50
Package Outline
4X Ø 2.50 Minfor optionalMounting Screws*
*For 1.6 mm thick PCB, use self-tapping, STN.STL. screws size M2 x 5.0 mm long. For other PCB thicknesses, contact 3M or your preferred 3M Distributor.
.0
0.13
.00
0.25
Dimensions inMillimeters
Tolerance
Dimension
3M Electronic & Interconnect Solutions Division6801 River Place Blvd.Austin, TX 78726-9000
For technical, sales or ordering information call 800-225-5373or visit our website: www.3M.com/eisd
3M Electronic Handling and Protection Division6801 River Place Blvd.Austin, TX 78726-9000
Test & Burn-In PGA Kit SocketsPin Grid Arrays
10
Date Issued: June 20, 2001TS-0675-09Sheet 1 of 2
Physical
InsulationMaterial: Polyethersyfone (PES)
Flammability: UL 94V-0Color: Black
Marking: 3M Logo & Part Number IdentifierCam Handle
Material: Stainless SteelContact
Material: Beryllium CopperPlating Options:
Electrical
Current Rating: 1 AmpInsulation Resistance: > 1 ¥ 1012 W at 500 VdcWithstanding Voltage: 1000 Vrms at Sea Level
Environmental
Temperature Rating Operating: - 55°°C to + 150°°C
MechanicalA: When used as a test socket at room temperature 24°°C the socket will last 25,000 actuations.B: Based on field experience, under normal burn-in conditions up to a maximum of 150°°C, the socket should last an average of four years.
• Available in 10 x 10 matrix through 25 x 25 matrix • Used when only a few test sockets are needed • Provides individual components ready for assembly • Open pattern top plate; load only those contacts needed for your specific device pin pattern
For technical, sales or ordering information call 800-328-0411or visit our website: http://www.3M.com/ehpd
30 m" (0.76 mm) Gold over 50 m" (1.3 mm) Nickel
3M Electronic Handling and Protection Division6801 River Place Blvd.Austin, TX 78726-9000
Test & Burn-In PGA Kit SocketPin Grid Arrays
Part Number Matrix Size Description
200-6310-9UN-1900 10 x 10
200-6311-9UN-1900 11 x 11
200-6313-9UN-1900 13 x 13
200-6315-9UN-1900 15 x 15S k t Kit W/O C t t
200-6317-9UN-1900 17 x 17Socket Kit W/O Contacts
200-6319-9UN-1900 19 x 19
200-6321-9UN-1900 21 x 21
200-6325-9UN-1900 25 x 25
300-6300-CNA-0002B Each Contact–BeCu/Au Plated
200-4660-14-1900 Set of 10 Extra Hole Plugs
TS-0675-09Sheet 2 of 2
Ordering Information
4X Phillips Pan-Hd#0-80 x 5/16 LongAssy Screw
10X Hole Plugs
Top Plate
Contact( Order Separately )
Cam Plate
Base Plate
Cam Handle
Standard Handle
Assembly Instructions1. Load hole plugs into top plate by
pressing fitting into place. Remove from tie bar by cutting with commercially available 6 1/2"flush diagonal cutter pliers.
2. Place cam plate into recessedarea of base plate, loadcontacts in desired locations,being careful that the bent leafof the contact is loaded incorrect position ( away fromcam handle. )
3. Insert cam handle into positionin the base plate.
4. Now make a final check that allcontacts are in desired locationand that all are fairly even at thetop. Also check cam to makesure it is still in position. Nowtake the top plate and place intoposition and start to lower overcontacts. Start at the rear of thesocket and rotate downwardtoward the front and then snaplocating bosses into place.Several very slight back andforth motions may be necessaryin order to get contacts to snapinto place. Care should be takenthat too much downwardpressure isn't applied whichcould bend or damage thecontacts. Insert screws andtighten.
5. Now make an operation checkby rotating handle 90°. Make avisual check of movement andclosure of all contacts. Rotatehandle and check the freedomof movement of cam plate andthat the moving leaf of thecontact clears the entry hole. Acontinuity check can be madebefore final soldering by placingdevice in socket, then closingand making check. Solderingshould be done with socket inthe open position.
Notes:1 Contact and extra Hole Plugs are ordered separately.2 See Test & Burn-In PGA socket section on page 29 for dimensional information on assembled sockets.
For technical, sales or ordering information call 800-328-0411or visit our website: http://www.3M.com/ehpd
1
3M Electronic Handling and Protection Division6801 River Place Blvd.Austin, TX 78726-9000
3M Textool, Interstitial Pin Grid Array Test & Burn-In Sockets
34
Date Issued: June 20, 2001TS-1358-04Sheet 1 of 3
Physical
Electrical
Environmental
Mechanical
Operating Temperature Rating: - 55°°C to + 150°°C
• 19 X 19 outer matrix with 18 X 18 inner staggered matrix holds up to 685 leads.• Lever actuated, zero insertion force mechanism. • Rugged, 3-plate construction for durability and electrical reliability. • Accommodates two lead diameter variations .25 - .40 mm (.010" - .016") inquire* .35 - .51 mm (.014" - .020") available *Note : Please contact 3M customer service for availability.
For technical, sales or ordering information call 800-328-0411or visit our website: http://www.3M.com/ehpd
Insulation: Material: Polyethersulfone (PES) Flammability: UL 94V-0 Color: Black Cam Handle: Material: Aluminum Alloy, Die Cast Contact: Material: Beryllium Copper Plating: Other Metal Parts: Stainless Steel Marking: 3M Logo / Textool Logo
Insulation Resistance: >500MW at 500 Vdc Dielectric Withstanding Voltage: 500 Vrms at Sea Level Initial Contact Resistance: 25mW max. initially Current Rating: 1.0 A max.
Durability: When used as a test socket at room temperature the socket will last 3,000 actuations.
30 m" (0.76 mm) Gold over 50 m" (1.3 mm) Nickel
3M Electronic Handling and Protection Division6801 River Place Blvd.Austin, TX 78726-9000
3M Textool, Interstitial Pin Grid ArrayTest & Burn-In Sockets
Ordering Information
TS-1358-04Sheet 2 of 3
(mm)
(.00)
(± .25) (± .13)
Tolerance
± .010 ± .005
.000
Tolerance
Dimension .00
(.0)
inch
For technical, sales or ordering information call 800-328-0411or visit our website: http://www.3M.com/ehpd
TE
XT
OO
L
2X
XX
-13
58
.012 X.012 Contact Tails[0.3 X 0.3]
.470 11.93
.20 5.0
.10
2.5
2.463 62.56
2.21
56.2
1.810
45.97
2.05
52.0
Finger AccessFeatue
2.64 67.0
3.22
81.8
.75
19.1
.46
11.8
.08 Contact Tail Length
2.0
3.28 83.2
.050 1.27
.07
1.8
.44
11.3
.06 Standoffs
Standoffs 1.5
P. C. BOARD PATTERN
1.800
45.72
.100 .002
2.54 0.05
.050 .002
1.27 0.05
.050 .002
1.27 0.05
.100 .002
2.54 0.05
1.800
45.72
685x Ø .024 [.62] MinContact Hole4x Ø .06 [1.5] Hole for
Mounting Screw
2XXX - 1358 - XX - 1902
Number of Contacts:( 685 Maximum )
Lead Diameter Variations:000 = 0.25 mm-0.40 mm
[ .010"-.016" ]050 = 0.35 mm-0.51 mm
[ .014"-.020" ]
Fro
nt
Fro
nt
3M Electronic Handling and Protection Division6801 River Place Blvd.Austin, TX 78726-9000
Key:1. This mark indicates holes only, no contacts.2. This mark indicates holes with contacts.
TS-1358-04Sheet 3 of 3
Interstitial Worksheet
Notes:1. This is only a work sheet. Do not proceed with any layout until a part number is assigned by 3M Textool. The pattern is subject to repositioning.
2. Lead diameter = .016 [ 0.39 ] min, .020 [ 0.51 ] max. The standard socket has been designed to accept these lead diameters only. For all others please consult the factory.
3. Use this sheet to indicate which positions you intend to use.4. The device lead must be a minimum of 2.54 [.100 ] below the standoffs on the device leads.
For technical, sales or ordering information call 800-328-0411or visit our website: http://www.3M.com/ehpd
3M Textool, Interstitial Pin Grid ArrayTest & Burn-In Sockets
A1
3M Electronic Handling and Protection Division6801 River Place Blvd.Austin, TX 78726-9000
Test & Burn-In IPGA Socket
9
Date Issued: June 20, 2001TS-1353-03Sheet 1 of 3
Physical
InsulationMaterial: Polyethersulfone (PES)
Flammability: UL 94V-0Color: Black (PES)
Marking: 3M LogoCam Handle
Material: Aluminum Alloy Die CastStopper & Screw Material: Stainless Steel
ContactMaterial: Beryllium Copper
Plating Options:
Electrical
Insulation Resistance: > 5 ¥ 108 W at 500 VdcDielectric Withstanding Voltage: No appearance of arcing or breakdown
Leak Current; 1mA Max.Contact Resistance: Initial; 25mW Max. After tests; 40mW Max.
Environmental
Operating Temperature Rating: - 55°°C to +150°°C
• 17 x 17 outer matrix with 16 x 16 inner staggered matrix holds up to 432 leads • Lever actuated zero insertion force mechanism • Rugged 3-plate construction for durability and electrical reliability • Accommodate two lead diameter variations .25 - .40 mm (.010" - .016") and .35 - .51 mm (.014" - .020")
For technical, sales or ordering information call 800-328-0411or visit our website: http://www.3M.com/ehpd
30 m" (0.76 mm) Gold over 50 m" (1.3 mm) Nickel
3M Electronic Handling and Protection Division6801 River Place Blvd.Austin, TX 78726-9000
Test & Burn-In IPGA Sockets
TS-1353-03Sheet 2 of 3
For technical, sales or ordering information call 800-328-0411or visit our website: http://www.3M.com/ehpd
OPEN
CLOSED
8. 0
10.5(1
6)??
??
(57)
(15)
0 .3
Sq.
(59)
Ø1.0Ø1.5
48.0
± 1.
0
42.9
64.0 ± 1.0
Typ. Entry Hole
13.14
4.0
2.54
40.64±0.10 Sq.
58.9
2.54± 0.05
1.27± 0.05
432x Ø .024 (.62) Min Contact Hole
Ordering Information2XXX - 1353 - XX - 3302
Number of Contacts:( 432 Maximum )
Lead Diameter Variations:000 = 0.25 mm-0.40 mm
[ .010"-.016" ]050 = 0.35 mm-0.51 mm
[ .014"-.020" ]
.0DIM
0.13
.00
DIMENSIONS INMILLIMETERS
0.25TOL
Fro
nt
Fro
nt
P. C. BOARD PATTERN
3M Electronic Handling and Protection Division6801 River Place Blvd.Austin, TX 78726-9000
Test & Burn-In IPGA Sockets
TS-1353-03Sheet 3 of 3
For technical, sales or ordering information call 800-328-0411or visit our website: http://www.3M.com/ehpd
3M
Key:1. This mark indicates holes only, no contacts.2. This mark indicates holes with contacts.
Notes:1. This is only a work sheet. Do not proceed with any layout until a part number is assigned by 3M Textool. The pattern is subject to repositioning.
2. Lead diameter = .016 [ 0.39 ] min, .020 [ 0.51 ] max. The standard socket has been designed to accept these lead diameters only. For all others please consult the factory.
3. Use this sheet to indicate which positions you intend to use.4. The device lead must be a minimum of 2.54 [.100 ] below the standoffs on the device leads.
3M Electronic Handling and Protection Division6801 River Place Blvd.Austin, TX 78726-9000
Test & Burn-In SPGA Socket
9
Date Issued: June 20, 2001TS-1361-04Sheet 1 of 3
Physical
Package and Board Specifications
Body: Glass Reinforced PEI (UL 94V-0) Contact: Beryllium Copper Gold Plating 20 micro inch Min. Cam Lever Part: Stainless steel Screw: Stainless steel (No.0-80 UNF) Plain Washer: Stainless steel Nut: Stainless steel
Package Lead Diameter: Ø0.20±0.05 mm Diameter A: 1.4 mm - 1.8 mm Lead count: 528 Max. Matrix: Standard product; 37x37 Max., 11 rows Plating: Gold plating
PC Board Board Thickness: A type — 1.6 mm B type — 3.2 mm C type — 5.0 mmThrough Hole Diameter: Ø0.4 mm Min.
Dielectric Withstanding Voltage: No appearance of arcing and break down Leak current.; 1mA Max. Insulation Resistance: 1000MW Max. Contact Resistance: Initial; 50mW Max. After tests; 500mW Max.
Electrical
• Package for 1.27 mm (.050") pitch PGA• Zero insertion force• Double mating contact• Lever mechanism for opening and shutting switch over• Maximum grid 37x37 and lead count of 600
For technical, sales or ordering information call 800-328-0411or visit our website: http://www.3M.com/ehpd
lc device
Socket
Dim.A
Lead pin
83.0MAX.
No.0-80 UNF [Ø 1.52]
[45.
52]
0.25
65.0
MA
X.
C/L of Solder Tail PatternC/L of Entry Hole Pattern CLOSE(FREE)
(Hole No,Al Side)
54.0
1.3Standoffs
25.0
MA
X.
AContact TailLength B
Mounting Screw Length
15.0
0.27
9.0
[34.28]
[67.11]72.5
0.20OPEN
1.27x36=45.72 ±0.08
1.27
x36=
45.7
2 ±0
.08
1.27 ± 0.05
11.23
34.28
67.11
1.27
± 0
.05
45.5
2
20.3
2 S
q.
600x
Ø 0
.40
Min.
Conta
ct Hole
XX
X2
371A
11
36
AU
3M
TE
XT
OO
L
4x Ø 1.65 Min.Hole for Mounting Screw
P.C. BOARD PATTERN
Part Number A B PCB Thickness2xxx-1361-SA-3302 2.8 4.2 1.62xxx-1361-SB-3302 4.3 7.2 3.22xxx-1361-SC-3302 6.0 7.2 5.0
3M Electronic Handling and Protection Division6801 River Place Blvd.Austin, TX 78726-9000
Test & Burn-In SPGA Sockets
TS-1361-04Sheet 2 of 3
For technical, sales or ordering information call 800-328-0411or visit our website: http://www.3M.com/ehpd
Ordering Information
2XXX-1361-SX-3302
Number of Contacts
Solder Tail LengthA = 2.8 mmB = 4.3 mmC = 6.0 mm
.0DIM
0.13
.00
DIMENSIONS INMILLIMETERS
0.25TOL
Fro
nt
Fro
nt
3M Electronic Handling and Protection Division6801 River Place Blvd.Austin, TX 78726-9000
Test & Burn-In SPGA Sockets
TS-1361-04Sheet 3 of 3
Notes:1. Use this sheet to indicate which positions you intend to use.2. For best results, keep the patterns as symmetrical with the centerline as possible.
For technical, sales or ordering information call 800-328-0411or visit our website: http://www.3M.com/ehpd
2 X X X 1 3 6 1
1
A AU
37
TEXTOOL3M
This mark indicates holes only, no contacts.This mark indicates holes with contacts.
3M Electronic Handling and Protection Division6801 River Place Blvd.Austin, TX 78726-9000
.050" (1.27 mm) x .100" (2.54 mm) Axial Lead ZIP Strip Sockets
21
Date Issued: February 20, 2001TS-0364-08Sheet 1 of 2
Physical
InsulationMaterial: Glass Filled Polysulfone
Flammability: UL 94V-0Color: Green
Marking: 3M Logo & Part Number IdentifierContact
Material: Beryllium CopperPlating:
Electrical
Current Rating: 1 AmpInsulation Resistance: > 1 ¥ 109 W at 500 VdcWithstanding Voltage: 1000 Vrms at Sea Level
Environmental
Operating Temperature Rating: - 55°°C to +150°°C
• For devices with .050" (1.27 mm) lead centers unformed or extending axially from package • Socket without top-plate cover enables horizontal insertion of leads • Frequently used in pairs to handle any non- standard Flat Pack with leads on .050" (1.27 mm) centers • Order left and right hand versions separately to obtain a complete pair • Lever actuated zero insertion force mechanism • Accepts pins up 0.14" (0.36 mm) to 0.25" (0.64 mm) square
For technical, sales or ordering information call 800-328-0411or visit our website: http://www.3M.com/ehpd
30 m" (0.76 mm) Gold over 50 m" (1.3 mm) Nickel
3M Electronic Handling and Protection Division6801 River Place Blvd.Austin, TX 78726-9000
Contact DimensionsContactQuantity A B C
34 2.65 [ 67.3 ] 1.650 [ 41.91 ] 2.46 [ 62.5 ]
35 2.65 [ 67.3 ] 1.700 [ 43.18 ] 2.46 [ 62.5 ]
51 3.45 [ 87.6 ] 2.500 [ 63.50 ] 3.27 [ 83.1 ]
Socket Part Number Contact Quantity
234-3034-01-060234
234-3034-02-060234
235-3019-01-060235
235-3019-02-060235
251-5949-01-060251
251-5949-02-060251
A
B
.050 Typ[ 1.28 ]
.43[ 10.9 ]
Max
Ganging Bar
.35 Max[ 8.8 ]
.18[ 4.6 ]
.40[ 10.2 ]
.050 Typ[ 1.27 ]
.10[ 2.5 ]
.55[ 14.0 ]
.19 Contact Tail Length[ 4.9 ]
.18[ 4.7 ]
2X #0-80 Mounting Screws
.012 X .028[ 0.31 ] [ 0.71 ]
Contact Tail
C
.580[ 14.73 ]
.09[ 2.3 ]
.74[ 18.8 ]
Max
Ordering Information
TS-0364-08Sheet 2 of 2
CL
Contact Pattern
See Contact Details
(mm)
(.00)
(± .25) (± .13)
Tolerance
± .010 ± .005
.000
Tolerance
Dimension .00
(.0)
inch
-02 Pattern-01 Pattern
.050" (1.27 mm) x .100" (2.54 mm) Axial Lead ZIP Strip Sockets
For technical, sales or ordering information call 800-328-0411or visit our website: http://www.3M.com/ehpd
3M Electronic Handling and Protection Division6801 River Place Blvd.Austin, TX 78726-9000
.050" (1.27 mm) x .100" (2.54 mm)
32 Position
Date Issued: November 1, 1999TS-0363-08Sheet 1 of 2
19
Physical
InsulationMaterial: Glass Filled Polysulfone
Flammability: UL 94V-0Color: Green
Marking: 3M Logo & Part Number IdentifierContact
Material: Beryllium CopperPlating: 30 m " (0.76 m m) Gold – MIL-G-45204, Type II, Grade C, over 50 m " (1.27 m m)
Nickel – QQ-N-290A, Class 2
Electrical
Current Rating: 1 AmpInsulation Resistance: > 1 ¥ 109 W at 500 VdcWithstanding Voltage: 1000 Vrms at Sea Level
Environmental
Operating Temperature Rating: - 55 °C to +150°C
Staggered ZIP Strip Sockets
• For devices with .050" (1.27 mm) lead centers formed in staggered rows with .100" (2.54 mm) between centers and rows • Socket with top-plate cover requires vertical insertion of leads • Frequently used in pairs to handle devices with standard leads on opposite sides of the package • Order left and right hand strips separately to obtain a complete pair • Lever actuated zero insertion force mechanism
For technical, sales or ordering information call 800-328-0411or visit our website: http://www.3M.com/ehpd
3M Electronic Handling and Protection Division6801 River Place Blvd.Austin, TX 78726-9000
32 Position
Socket Part Number Contact Quantity
232-1270-01-0602J 32
232-1270-02-0602J 32
.43 Max[ 10.9 ]
2.45 [ 62.1 ]
1.550 [ 39.37 ]31X .050 [ 1.27 ]
.050 Typ[ 1.27 ]
GangingBar
.38 Max[ 9.7 ]
.40[ 10.2 ]
.050 Typ[ 1.27 ]
.76 Max[ 19.3 ]
Mounting Screw2X #0-80
.09[ 2.3 ]
.469[11.91]
.011 x .029[ 0.28 ] [ 0.74 ]
Contact Tail
2.26 [ 57.3 ]
.13 [ 3.4 ]
.20 [ 5.1 ]
.43[ 10.9 ]
.02 [ 0.5 ]
Ordering Information
TS-0363-08Sheet 2 of 2
Contact Pattern:
SeeDetails
CL
(mm)
(.00)
(± .25) (± .13)
Tolerance
± .010 ± .005
.000
Tolerance
Dimension .00
(.0)
inch
±001 Pattern ±002 Pattern
.050" (1.27 mm) x .100" (2.54 mm) Staggered ZIP Strip Sockets
For technical, sales or ordering information call 800-328-0411or visit our website: http://www.3M.com/ehpd
3M
Interconnect Solutionshttp://www.3M.com/interconnects/
3M is a trademark of 3M Company.For technical, sales or ordering information call
800-225-5373
3M™ Textool™ Burn-In Grid ZIP SocketsPin Grid Arrays
Physical
Electrical
Environmental
Mechanical
Textool is a trademark of 3M Company.
InsulationMaterial: Polyethersulfone (PES)
Flammability: UL 94V-0Color: Black PES
Marking: Part Number Identifier and Logo on AllCam Handle
Material: Stainless SteelContact
Material: Beryllium CopperPlating: 30µ" (0.76 µm) Gold over 50µ" (1.3 µm) Nickel
Current Rating: 1 AmpInsulation Resistance: > 1 × 1012 at 500 Vdc
Withstanding Voltage: 1000 Vrms at sea level
Operating Temperature Rating: -55°C to +150°C
PES/BeCu A. When used as a test socket at room temperature 24°C the socket will last 25,000 actuations.B. Based on field experience, under normal burn-in conditions up to a maxi-mum of 150°C for PES, the socket should last an average of 4 years.
TS-0358-16Sheet 1 of 4
Date Modified: November 8, 2004
• Lever actuated zero insertion force mechanism• Rugged 3-plate construction for durability and
electrical reliability• Available in 10 x 10 through 25 x 25 matrices• PTFE coated stainless steel handle - durable
and safe in high humidity environments• Optical locating holes for robotics loading/
unloading• Repairable - contacts, handles, top-plate, and cam
plate are replaceable
3M
Interconnect Solutionshttp://www.3M.com/interconnects/
3M is a trademark of 3M Company.For technical, sales or ordering information call
800-225-5373
3M™ Textool™ Burn-In Grid ZIP SocketsPin Grid Arrays
2XXX - 63XX - XXX - 1902Number of Contacts
6310-10x106311-11x116313-13x136315-15x156317-17x176319-19x196321-21x216324-25x25
0UA = Molded Pattern9UA = All holes open
Plating PES:1902 with /30µ" Au/Ni on BeCu
TS-0358-16Sheet 2 of 4
Ordering Information
Note: Additional ten hole plugs can be ordered separately, part #200-4660-14-1900
3M
Interconnect Solutionshttp://www.3M.com/interconnects/
3M is a trademark of 3M Company.For technical, sales or ordering information call
800-225-5373
3M™ Textool™ Burn-In Grid ZIP SocketsPin Grid Arrays
TS-0358-16Sheet 3 of 4
3M
Interconnect Solutionshttp://www.3M.com/interconnects/
3M is a trademark of 3M Company.For technical, sales or ordering information call
800-225-5373
3M™ Textool™ Burn-In Grid ZIP SocketsPin Grid Arrays
TS-0358-16Sheet 4 of 4
3M Electronic Handling and Protection Division6801 River Place Blvd.Austin, TX 78726-9000
Receptacles for DIP Sockets
43
Date Issued: February 19, 2001TS-0454-12Sheet 1 of 3
Physical
InsulationMaterial: Glass Filled Polysulfone
Flammability: UL 94V-0Color: Green
Marking: 3M Logo & Part Number IdentifierContact
Material: Beryllium CopperPlating:
Environmental
Current Rating: 1 AmpInsulation Resistance: >1 ¥ 109 W at 500 VdcWithstanding Voltage: 1000 Vrms at Sea Level
Environmental
Operating Temperature Rating: - 55°°C to + 150°°C
• Matching receptacle for every ZIP DIP Socket, including “Universal DIP” and “Shrink DIP” • Mounting flanges hold receptacle to board• Pre-tapped holes in receptacle body mate with screw-hole in socket to hold socket firmly to receptacle (2 screws provided with each receptacle) • Available in wire-wrap and solder-tail options, with and without mounting flanges
For technical, sales or ordering information call 800-328-0411or visit our website: http://www.3M.com/ehpd
30 m" (0.76 mm) Gold over 50 m" (1.3 mm) Nickel
3M Electronic Handling and Protection Division6801 River Place Blvd.Austin, TX 78726-9000
Receptacle for DIP Sockets
Receptable Part NumbersDimensions
Receptable Part NumbersA B C D E F G H
214-3339-XX 1.00[ 25.4 ]
.60[ 15.2 ]
1.28[ 32.5 ]
.820[ 20.83 ]
.300[ 7.62 ]
.600[ 15.26 ]
216-3340-XX .96[ 24.4 ]
.56[ 14.2 ]
1.37[ 34.8 ]
.773[ 19.63 ]
.700[ 17.78 ]
218-3341-XX .95[ 24.1 ]
.55[ 14.0 ]
1.49[ 37.8 ]
.770[ 19.56 ]
.300[ 7.62 ]
.804[ 20.42 ]
220-3342-XX 1.00[ 25.4 ]
.60[ 15.2 ]
1.58[ 40.1 ]
.820[ 20.83 ]
[ 7.62 ]
.900[ 22.86 ]
222-3343-XX 1.06[ 26.9 ]
.65[ 16.5 ]
1.69[ 42.9 ]
.870[ 22.09 ]
.400[ 10.16 ]
1.005[ 25.53 ]
.100[ 2.54 ]
.40[ 10.2 ]
224-1275-XX 1.26[ 32.0 ]
.86[ 21.8 ] 1.77
1.080[ 27.43 ]
.600[ 15.24 ] 1.100
[ 2.54 ] [ 10.2 ]
224-5248-XX .96[ 24.4 ]
.56[ 14.2 ]
1.77[ 45.0 ] .773
[ 19.63 ].300
[ 7.62 ]
1.100[ 7.62 ]
228-1277-XX 1.26[ 32.0 ]
.86[ 21.8 ] 1.98
1.085[ 27.56 ]
.600[ 15.24 ]
1.300[ 33.02 ]
228-4817-XX 1.06[ 26.9 ]
.66[ 16.8 ]
1.98[ 50.3 ] .887
[ 22.53 ] .400
1.301[ 33.05 ]
228-1290-XX 1.09[ 27.9 ]
.70[ 17.8 ]
1.59[ 40.5 ]
.92[ 23.4 ]
.400[ 10.16 ] .970
[ 24.74 ].070
[ 1.78 ].41
[ 10.4 ]
232-1285-XX 1.25 [ 32.0 ]
.86[ 21.9 ]
2.17[ 55.2 ]
1.08[ 27.5 ]
.600[ 15.24 ]
1.500[ 38.10 ]
240-3639-XX 1.66[ 42.2 ]
1.26[ 32.0 ] 2.58
1.480[ 37.59 ]
1.000[ 25.4 ]
1.900[ 48.26 ]
.100[ 2.54 ]
.40[ 10.2 ]
240-1280-XX 1.27[ 32.3 ]
.86[ 21.8 ]
2.58[ 65.5 ] 1.085
[ 27.56 ].600
[ 15.24]1.900
[ 48.26 ]
[ 2.54 ] [ 10.2 ]
242-1293-XX 1.30[ 33.0 ]
.90[ 22.9 ]
2.08[ 52.9 ]
1.12[ 28.5 ]
.600[ 15.24 ]
1.460[ 37.08 ]
.070[ 1.78 ]
.41[ 10.4 ]
242-1281-XX 1.26[ 32.0 ] .86
2.68[ 68.1 ]
1.080[ 27.43 ]
.600[ 15.24 ]
2.00[ 50.80 ] .100
.40[ 10.2 ]
248-1282-XX 1.25[ 31.8 ]
.86[ 21.8 ] 2.98
[ 75.8 ]1.070
[ 27.18 ].600
[ 15.24 ]2.500
[ 63.50 ]
.100[ 2.54 ] .50
[ 12.7 ]
264-1300-XX 1.52[ 38.5 ]
1.11[ 28.3 ]
2.85[ 72.5 ]
1.34[ 34.0 ]
.800[ 20.32 ]
2.230[ 56.64 ]
.070[ 1.78 ]
.41[ 10.4 ]
264-4493-XX 1.70[ 43.2 ]
1.30[ 33.0 ]
3.95[ 100.3 ]
1.520[ 38.61 ] .900
3.243[ 82.37 ]
.100[ 2.54 ]
.50[ 12.7 ]
290-1294-XX 1.61[ 40.8 ]
1.19[ 30.2 ]
3.77[ 95.7 ]
1.42[ 36.0 ]
.900[ 22.86 ] 3.150
[ 80.01 ].070
[ 1.78 ].41
[ 10.4 ]
TS-0454-12Sheet 2 of 3
C
F
A D
.30[ 7.6 ]
ERef
B
.13 or .62[ 3.3 ] or [ 15.7 ]
E
.09[ 2.3 ]
.27[ 6.9 ]
GH
2X #0-80 Tapped Hole.025 Sq Typ
Contact TailLength
[ 0.64 ]
(mm)
(.00)
(± .25) (± .13)
Tolerance
± .010 ± .005
.000
Tolerance
Dimension .00
(.0)
inch
2X Dia. .093 Typ(2.36)
For technical, sales or ordering information call 800-328-0411or visit our website: http://www.3M.com/ehpd
3M Electronic Handling and Protection Division6801 River Place Blvd.Austin, TX 78726-9000
Receptacles for DIP Sockets.
Ordering Information
Receptable Part Numbers Contact DimensionsReceptable Part Numbers Contact
Quantity Contact Spacing Distance Between Rows214-3339-XX-0602J 14
216-3340-XX-0602J 16300 [ 7 62 ]
218-3341-XX-0602J 18.300 [ 7.62 ]
220-3342-XX-0602J 20
222-3343-XX-0602J 22 .100 [2.54 ] .400 [ 10.16 ]
224-1275-XX-0602J24
.100 [2.54 ]
.600 [ 15.24 ]
224-5248-XX-0602J24
.300 [ 7.62 ]
228-1277-XX-0602J .600 [ 15.24 ]
228-4817-XX-0602J 28400 [ 10 16 ]
228-1290-XX-0602J
28
.070 [ 1.78 ].400 [ 10.16 ]
232-1285-XX-0602J 32 .600 [15.24 ]
240-3639-XX-0602J40
.100 [2.54 ] 1.000 [25.40 ]
240-1280-XX-0602J40
.100 [2.54 ]
242-1293-XX-0602J42
.070 [ 1.78 ]600 [15 24 ]
242-1281-XX-0602J42
100 [2 54 ]
.600 [15.24 ]
248-1282-XX-0602J 48.100 [2.54 ]
264-1300-XX-0602J64
.070 [ 1.78 ] .800 [ 20.32 ]
264-4493-XX-0602J64
.100 [2.54 ]900 [ 22 86 ]
290-1294-XX-0602J 90 .070 [ 1.78 ].900 [ 22.86 ]
Contact Tail Length:
TS-0454-12Sheet 3 of 3
XX = 09, .13 [ 3.3 ] Solder Tail w/ flanges = 19, .62 [ 15.8 ] Wire Wrap w/ flanges = 29, .13 [ 3.3 ] Solder Tail w/out flanges = 39, .62 [ 15.8 ] Wire Wrap w/out flanges
For technical, sales or ordering information call 800-328-0411or visit our website: http://www.3M.com/ehpd
1 Available with -09, -19, -29 and -39 options.
2 Only available with the -09 & -29 option for the .070" (1.78 mm) spacing
3 Only available with -09 and -19 options
3
3
3
3
3
1
3
1
3
2
1
3
1
2
1
1
2
3
2
(mm)
(.00)
(± .25) (± .13)
Tolerance
± .010 ± .005
.000
Tolerance
Dimension .00
(.0)
inch
3M™ ZIP Strip Sockets.100” [2.54 mm] In-Line ZIP Strip Sockets
Physical
Electrical
Environmental
• Forsingle-in-linepackageson.100”(2.54mm) centers •Canbeusedinsetsoftwoormoretocreatea socketfornon-standardleadedpackageson 100”(2.54mm)centers•SIPpincountsfrom10through36leads• Leveractuatedzeroinsertionforcemechanism•Acceptspinsupto.025”(0.6mm)square•Socketcontactpointof.085”(2.2mm)belowtop surfaceofsocket• SeeRegulatoryInformationAppendixforchemi-
calcomplianceinformation.ParagraphsE1andC1apply.
DateModified:March17,2009 TS-0362-ASheet 1 of 2
Insulation Material: GlassFilledPolysulfone Flammability: UL 94V-0 Color: Green Marking: 3M Logo & Part Number Identifier Contact Material: Beryllium Copper Plating: 30 m” (0.76 mm) Gold over 50 m” (1.3 mm) Nickel
Current Rating: 1Amp Insulation Resistance: >1x109 Wat500V
DC
Withstanding Voltage: 1,000VRMS
atSeaLevel
Operating Temperature Rating: -55°Cto+150°C
Electronic Solutions DivisionInterconnect Solutionshttp://www.3M.com/interconnects
3M is a trademark of 3M Company.For technical, sales or ordering information call
800-225-5373
3
3M™ ZIP Strip Sockets.100” [2.54 mm] In-Line ZIP Strip Sockets
Electronic Solutions DivisionInterconnect Solutionshttp://www.3M.com/interconnects
3M is a trademark of 3M Company.For technical, sales or ordering information call
800-225-5373
A
C.56[ 14.2 ]
D
.40[ 10.2 ]
.095 Typ[ 2.41 ]
Note: Stabilizing ears present onlyon 32 & 36 positions.
.38 Max[ 9.7 ]
.42 Max[ 10.7 ]
.73 Max[ 18.5 ]
.13[ 3.3 ] .09
[ 2.3 ]
Contact T
Contact TailLength
ails
.012 x .030[ 0.30 ] [ 0.76 ]
B
2X #0-80 Screw .22[ 5.8 ]
.41[ 10.4 ]
.100 Typ[ 2.54 ]
.20[ 5.0 ]
(mm)
(.00)
(± .25) (± .13)
Tolerance
± .010 ± .005
.000
Tolerance
Dimension .00(.0)
inch
Ordering Information
.050 Typ[ 1.27 ]
.144 Typ[ 3.66 ]
Contact DimensionsContactQuantity A B C D
10 1.77 [ 45.0 ] 1.60 [ 40.8 ] .900 [ 22.86 ] N/A20 2.77 [ 70.4 ] 2.57 [ 65.3 ] 1.900 [ 48.26 ] N/A24 3.15 [ 80.0 ] 2.97 [ 75.4 ] 2.300 [ 58.42 ] N/A32 3.97 [ 100.8 ] 3.81 [ 96.8 ] 3.100 [ 78.74 ] 2.00 [ 50.8 ]36 4.35 [ 110.5 ] 4.17 [ 105.9 ] 3.500 [ 88.90 ] 2.28 [ 57.8 ]
Socket Part Number Contact Quantity
210-2599-00-0602 10220-2600-00-0602 20224-5809-00-0602 24232-2601-00-0602 32236-6225-00-0602 36
3
TS-0362-ASheet 2 of 2
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.
Please recycle. Printed in USA.© 3M 2008. All rights reserved.RIA-2217B-E
3
3M Electronics Solutions Division6801 River Place Blvd.Austin, TX 78726-9000U.S.A.1-800-225-5373www.3m.com/interconnects 3M is a trademark of 3M Company.
Appendix C3: China RoHSElectronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below.
3M Electronic Handling and Protection Division6801 River Place Blvd.Austin, TX 78726-9000
.100" (2.54 mm) Universal DIP Sockets
Date Issued: February 20, 2001TS-0392-10Sheet 1 of 2
13
Physical
InsulationMaterial: Glass Filled Polysulfone
Flammability: UL 94V-0Color: Green
Marking: 3M Logo & Part Number IdentifierContact
Material: Beryllium CopperPlating:
Electrical
Current Rating: 1 AmpInsulation Resistance: > 1 ¥ 109 W at 500 VdcWithstanding Voltage: 1000 Vrms at Sea Level
Environmental
Operating Temperature Rating: - 55°°C to +150°°C
Mechanical
When used as a test socket at room temperature 24°°C the socket will last 20,000 actuations.
• For DIP's with .100" (2.54 mm) lead spacing • Extra wide contact zone allows insertion of DIP's with distance between rows from .300" (7.62 mm) through .600" (15.24 mm) • Lever actuated zero insertion force mechanism • Socket contact point of .090" (2.29 mm) below top surface of socket
For technical, sales or ordering information call 800-328-0411or visit our website: http://www.3M.com/ehpd
30 m" (0.76 mm) Gold over 50 m" (1.3 mm) Nickel
3M Electronic Handling and Protection Division6801 River Place Blvd.Austin, TX 78726-9000
.100" (2.54 mm) Universal DIP Sockets
ContactDimensions
ContactQuantity A B C
24 1.77 [ 45.0 ] 1.61 [ 40.9 ] 1.100 [ 27.94 ]
28 1.99 [ 50.5 ] 1.81 [ 46.0 ] 1.300 [ 33.02 ]
32 2.19 [ 56.6 ] 2.01 [ 51.1 ] 1.500 [ 38.10 ]
40 2.59 [ 65.8 ] 2.41 [ 61.2 ] 1.900 [ 48.26 ]
42 2.69 [ 68.2 ] 2.51 [ 63.8 ] 2.000 [ 50.80 ]
Socket Part Number Contact Quantity Mating Receptacle Part Number
224-1286-00-0602J 24 224-1275-XX-0602J
228-1371-00-0602J 28 228-1277-XX-0602J
232-1287-00-0602J 32 232-1285-XX-0602J
240-1288-00-0602J 40 240-1280-XX-0602J
242-1289-00-0602J 42 242-1281-XX-0602J
.48 ± .05[ 12.1 ]
.46 ± .05[ 11.6 ]
.46 ± .05[ 11.6 ]
B
A
C .41 [ 10.4 ]
.450[ 11.43 ]
.90[ 22.9 ]
.28[ 7.1 ]
.600[ 15.24 ]
Closed
.11 [ 2.9 ] Contact Tail Length
.12 [ 3.0 ] Contact Tail Length applies only on 42 position socket.
.100[ 2.54 ]Pitch .012 [ 0.30]
.100 Ref[ 2.54 ]
.090 [ 2.29 ]
.020[ 0.51 ]
Contact Tail Length:XX = 09 Solder Tail .13 [ 3.3 ] w/ flanges
= 19 Wire Wrap Tail .62 [15.8] w/ flanges= 29 Solder Tail .13 [3.3] w/out flanges= 39 Wire Wrap Tail .62 [15.8] w/out flanges
TS-0392-10Sheet 2 of 2
Ordering Information
(mm)
(.00)
(± .25) (± .13)
Tolerance
± .010 ± .005
.000
Tolerance
Dimension .00
(.0)
inch
.030[ 0.76 ]
For technical, sales or ordering information call 800-328-0411or visit our website: http://www.3M.com/ehpd
1
1
3M Electronic Handling and Protection Division6801 River Place Blvd.Austin, TX 78726-9000
.100" (2.54 mm) DIP SocketsZIP DIP
TS-0365-14Sheet 1 of 3Date Issued: July 11, 2001
12
Physical
InsulationMaterial: Glass Filled Polysulfone
Flammability: UL 94V-0Color: Green
Marking: 3M Logo & Part Number IdentifierContact
Material: Beryllium CopperPlating:
Electrical
Current Rating: 1 AmpInsulation Resistance: > 1 ¥ 109 W at 500 VdcWithstanding Voltage: 1000 Vrms at Sea Level
Environmental
Operating Temperature Rating: - 55 °C to +150°C
Mechanical
When used as a test socket at room temperature 24°C the socket will last 20,000 actuations.
• For DIPs with .100" (2.54 mm) lead spacing • Pin counts for 14-64 leads• Lever actuated zero insertion force mechanism• Socket easily disassembles for repairability • Socket contact point of .110" (2.79 mm) below top surface of socket
For technical, sales or ordering information call 800-328-0411or visit our website: http://www.3M.com/ehpd
30 m" (0.76 mm) Gold over 50 m" (1.3 mm) Nickel
3M Electronic Handling and Protection Division6801 River Place Blvd.Austin, TX 78726-9000
.100" (2.54 mm) DIP SocketsZIP DIP
2XX-XXXX-00
TE
XT
OO
L 3M
A
F
D .325[ 8.26 ]
C B
.100 Typ.[ 2.54 ]
.46[ 11.6 ]
Closed
E
2.40[ 61.0 ]
.48[ 12.3 ]
.012 X .030[ 0.30 X 0.76 ]Contact Tails
.020[ 0.51 ]
Standoffs.110
[ 2.79 ]Contact Tail
Length
.47[ 11.9 ]
Ordering Information
See tables on the next page.
TS-0365-14Sheet 2 of 3
.09[ 2.3 ]
Notes:1 This dimension is .105 [ 2.67 ] for the 48 and 64 lead sockets. This dimension is .40 [ 10.2 ] for the 48 and 64 lead sockets. 224-1275-00-0602J, 228-1277-00-0602J, 232-1285-00-0602J, 240-1280-00-0602J,
242-1281-00-0602J, and 248-1182-00-0602J have thru holes and no screws.
(mm)
(.00)
(± .25) (± .13)
Tolerance
± .010 ± .005
.000
Tolerance
Dimension .00
(.0)
inch
23
1
2
3
For technical, sales or ordering information call 800-328-0411or visit our website: http://www.3M.com/ehpd
3M Electronic Handling and Protection Division6801 River Place Blvd.Austin, TX 78726-9000
.100" (2.54 mm) DIP SocketsZIP DIP
Contact Quantity Device Row Spacing Accepted Dim A Dim B Dim C Dim D Dim E Dim F
14 .17 – .43 [ 4.3 ] – [ 10.9 ]
1.30[ 33.0 ]
.60[ 15.2 ]
1.11[ 28.2 ]
16 .17 – .43 [ 4.3 ] – [ 10.9 ]
1.39[ 35.3 ] .60 .300
.70[ 17.8 ] .30
1.21[ 30.7 ]
18 .17 – .43 [ 4.3 ] – [ 10.9 ]
1.49[ 37.8 ]
.60[ 15.2 ]
.300[ 7.62 ] .80
[ 20.3 ]
.30[ 7.6 ] 1.31
[ 33.3 ]
20 .17 – .43 [ 4.3 ] – [ 10.9 ]
1.59[ 40.4 ]
.90[ 22.9 ]
1.41[ 35.8 ]
22 .27 – .53[ 6.9 ] – [ 13.5 ]
1.69[ 42.9 ]
.70[ 17.8 ]
.400[10.16 ]
1.00[ 25.4 ]
.35[ 8.9 ]
1.51[ 38.4 ]
24
.47 – .73[ 11.9 ] – [ 18.5 ]
1.79
.90[ 22.9 ]
1.78[ 45.3 ]
.600[ 15.25 ] 1.10
.45[ 11.4 ] 1.61
24.17 – .43
[ 4.3 ] – [ 10.9 ] [ 45.5 ].60
[ 15.2 ].300
[ 7.62 ]
1.10[ 27.9 ] .30
[ 7.6 ]
1.61[ 40.9 ]
28
.47 – .73[ 11.9 ] – [ 18.5 ]
1.99
.90[ 22.9 ]
.600[ 15.25 ] 1.30
.45[ 11.4 ]
1.81[ 46.0 ]
28.27 – .53
[ 6.9 ] – [ 13.5 ] [ 50.5 ]
1.98[ 50.4 ]
.70[ 17.8 ]
.400[10.16 ]
1.30[ 33.0 ] .35
[ 8.9 ]1.83
[ 46.0 ]
32 .47 – .73[ 11.9 ] – [ 18.5 ]
2.19[ 55.5 ] .90 .600
1.50[ 38.1 ] .45
2.01[ 51.1 ]
40
.47 – .73[ 11.9 ] – [ 18.5 ]
2.58[ 65.6 ]
.90[ 22.9 ]
.600[ 15.25 ]
1.90
.45[ 11.4 ] 2.41
[ 61.2 ]40
.87 – 1.13[ 22.1 ] – [ 28.7 ]
2.58[ 65.5 ]
1.30[ 33.0 ]
1.000[ 25.40 ]
1.90[ 48.3 ] .65
[ 16.5 ]2.40
[ 61.0 ]
42 .47 – .73[ 11.9 ] – [ 18.5 ]
2.68[ 68.2 ] .90 .600
2.0[ 50.8 ] .45
2.51[ 63.8 ]
48 .47 – .73[ 11.9 ] – [ 18.5 ]
2.98[ 75.8 ]
.90[ 22.9 ]
.600[ 15.25 ] 2.30
[ 58.4 ]
.45[ 11.4 ] 2.81
[ 71.4 ]
64 .77 – 1.03[ 19.8 ] – [ 26.2 ]
3.95[ 100.3 ]
1.30[ 33.0 ]
.900[ 22.86 ]
3.10[ 78.7 ]
65[ 16.5 ]
3.73[ 94.7 ]
Socket Part Number Contact Quantity Distance Between Rows Mating Receptacle Part Number
214-3339-00-0602J 14 214-3339-XX-0602J
216-3340-00-0602J 16300 [ 7 62 ]
216-3340-XX-0602J
218-3341-00-0602J 18.300 [ 7.62 ]
218-3341-XX-0602J
220-3342-00-0602J 20 220-3342-XX-0602J
222-3343-00-0602J 22 .400 [ 10.16 ] 222-3334-XX-0602J
224-1275-00-0602J24
.600 [ 15.24 ] *224-1275-XX-0602J
224-5248-00-0602J24
.300 [ 7.62 ] 224-5248-XX-0602J
228-1277-00-0602J28
.600 [ 15.24 ] *228-1277-XX-0602J
228-4817-00-0602J28
.400 [ 10.16 ] 228-4817-XX-0602J
232-1285-00-0602J 32600 [ 15 24 ]
*232-1285-XX-0602J
240-1280-00-0602J40
.600 [ 15.24 ]240-1280-XX-0602J
240-3639-00-0602J40
1.00 [ 25.4 ] 240-3639-XX-0602J
242-1281-00-0602J 42600 [ 15 24 ]
*242-1281-XX-0602J
248-1282-00-0602J 48.600 [ 15.24 ]
*248-1282-XX-0602J
264-4493-00-0602J 64 .900 [ 22.86 ] 264-4493-XX-0602J
TS-0365-14Sheet 3 of 3
*Only these P/N's available with -09, -19, -29, and -39 receptacle options.All others only available with -09, and -19 options.
Contact Tail Length:
= 09 Solder Tail .13 [ 3.3 ] w/ flanges= 19 Wire Wrap Tail .62 [15.8] w/ flanges= 29 Solder Tail .13 [3.3] w/out flanges= 39 Wire Wrap Tail .62 [15.8] w/out flanges
Ordering Information
XX
For technical, sales or ordering information call 800-328-0411or visit our website: http://www.3M.com/ehpd
3M Electronic Handling and Protection Division6801 River Place Blvd.Austin, TX 78726-9000
.070" DIP SocketsShrink DIP
TS-0366-12Sheet 1 of 2Date Issued: June 20, 2001
14
Physical
InsulationMaterial: Glass Filled Polysulfone
Flammability: UL 94V-0Color: Green
Marking: 3M Logo & Part Number IdentifierContact
Material: Beryllium CopperPlating: Gold Flash over 50 m" (1.3 mm) Nickel
Electrical
Current Rating: 1 AmpInsulation Resistance: > 1 ¥ 109 W at 500 VdcWithstanding Voltage: 1000 Vrms at Sea Level
Environmental
Operating Temperature Rating: - 55°°C to +150°°C
Mechanical
When used as a test socket at room temperature 24°°C the socket will last 20,000 actuations.
• For DIPs with .070" (1.78 mm) lead spacing • Pin counts from 28 through 90 leads• Lever actuated zero insertion force mechanism • Socket contact point of .090" (2.29 mm) below top surface of socket
For technical, sales or ordering information call 800-328-0411or visit our website: http://www.3M.com/ehpd
30 m" (0.76 mm) Gold over 50 m" (1.3 mm) Nickel
3M Electronic Handling and Protection Division6801 River Place Blvd.Austin, TX 78726-9000
.070" DIP SocketsShrink DIP
ContactDimensions
ContactQuantity A B C D E
28 1.60 [ 40.5] 1.42 [ 36.1] .70 [ 17.8] .40 [ 10.16] .91 [ 23.14]
1.73 [ 44.0 ] 1.56 [ 39.6 ] .70 [ 17.8 ] .40 [ 10.16 ] 1.05 [ 26.67 ]
42 2.10 [ 52.9] 1.90 [ 48.5] .90 [ 22.9] .60 [ 15.24] 1.40 [ 35.60 ]
64 2.90 [ 72.5] 2.68 [ 68.0] 1.10 [ 28.3] .80 [ 20.70] 2.20 [ 55.18]
56 2.57 [ 65.4] 2.40 [ 61.0] .90 [ 22.9] .60 [ 15.24] 1.89 [ 48.01]
90 3.77 [ 95.7] 3.59 [ 91.3] 1.23 [ 31.3] .90 [ 22.86] 3.08 [ 78.32]
Socket Part Number Contact Quantity Mating Receptacle Part Number
228-1290-00-0602J 28 228-1290-XX-0602J
232-1291-00-0602J 32 NOT AVAILABLE
242-1293-00-0602J 42 242-1293-XX-0602J
264-1300-00-0602J 64 264-1300-XX-0602J
256-1292-00-0602J 56 NOT AVAILABLE
290-1294-00-3302J 90 290-1294-XX-0602J
TE
XTO
OL
PA
T. NO
3763455
2XX-XXXX-00
A
C
B
DRef
.09[2.2 ]
2X .13[3.3]
.46[11.7 ]
Closed
.49[12.4]
.41[10.4]
.12[3.3 ]
Contact
.020 [0.51]Standoffs
TailLength
.46[11.6 ]
.070[1.78 ]Pitch
.014 x .030[ 0.36 ] [ 0.76 ]
Contact Tails
E
D
2X Dia. .080 ± .002 [ 2.00 ± .05 ](Clearance for mounting screw)
Ordering Information
TS-0366-12Sheet 2 of 2
Note:1 This socket is available only in black polyetherimide plastic.
(mm)
(.00)
(± .25) (± .13)
Tolerance
± .010 ± .005
.000
Tolerance
Dimension .00
(.0)
inch
32
1
Contact Tail Length:XX = 09 Solder Tail w/ flanges = 29 Solder Tail w/out flanges
For technical, sales or ordering information call 800-328-0411or visit our website: http://www.3M.com/ehpd
3M Electronic Handling and Protection Division6801 River Place Blvd.Austin, TX 78726-9000
Test & Burn-In SOIC Sockets
34
Date Issued: February 19, 2001TS-0338-09Sheet 1 of 4
Physical
InsulationMaterial: Glass Filled Polyethersulfone
Flammability: UL 94V-0Color: Black
Marking: 3M Logo & Part Number IdentifierContact
Material: Beryllium-CopperPlating:
Environmental
Current Rating: 1 AmpInsulation Resistance: > 1 ¥ 1012 W at 500 VdcWithstanding Voltage: 1000 Vrms at Sea Level
Environmental
Operating Temperature Rating: - 55°°C to + 150°°C
• Lid can be actuated from top or front and is compatible with automated load/unload equipment • Compact envelope and side to side stackability maximize board density • Tweezer slot for easy manual loading/unloading • Lid applies 80 grams normal force per lead for maximum electrical reliability • Accepts Gull Wing JEDEC device sizes in .150" (3.81 mm) and .300" (7.62 mm) body widths
For technical, sales or ordering information call 800-328-0411or visit our website: http://www.3M.com/ehpd
30 m" (0.76 mm) Gold over 50 m" (1.3 mm) Nickel
3M Electronic Handling and Protection Division6801 River Place Blvd.Austin, TX 78726-9000
Test & Burn-In SOIC Sockets
PartN b
DimensionsNumber A B C D
7391
7390 1.45 [ 36.8 ] .47 [ 11.9 ] .79 [ 20.0 ] 1.52 [ 38.0 ]
7383
1.45 [ 36.8 ] .47 [ 11.9 ] .79 [ 20.0 ] 1.52 [ 38.0 ]
7224
7223 1.59 [ 40.4 ] .57 [ 14.5 ] .86 [ 21.8 ] 1.64 [ 41.7 ]
7201
1.59 [ 40.4 ] .57 [ 14.5 ] .86 [ 21.8 ] 1.64 [ 41.7 ]
7397
7396 1.69 [ 42.9 ] .80 [ 20.3 ] .92 [ 23.3 ] 1.74 [ 44.2 ]
7474
1.69 [ 42.9 ] .80 [ 20.3 ] .92 [ 23.3 ] 1.74 [ 44.2 ]
Part Number Leads SOIC Body Width
208-7391-55-1902 8
214-7390-55-1902 14 .150 [ 3.81 ]
216-7383-55-190216
.150 [ 3.81 ]
216-7224-55-190216
218-7223-55-1902 18
220-7201-55-1902 20 .300 [ 7.62 ]
224-7397-55-1902 24
.300 [ 7.62 ]
228-7396-55-190228
228-7474-55-190228
.330 [ 8.38 ]
3MT
EX
TO
OL
A
B
D
.20[ 5.1 ]
Recommended Spacing
Centerline of Contact Pattern.024 x .018
[ 0.61 ] x [ 0.46 ]Contact Tails
.14[ 3.8 ]
Contact TailLength
.64[ 16.3 ]
Ordering Information
TS-0338-09Sheet 2 of 4
.020[ 0.51 ]
StandoffsC
(mm)
(.00)
(± .25) (± .13)
Tolerance
± .010 ± .005
.000
Tolerance
Dimension .00
(.0)
inch
For technical, sales or ordering information call 800-328-0411or visit our website: http://www.3M.com/ehpd
3M Electronic Handling and Protection Division6801 River Place Blvd.Austin, TX 78726-9000
Test & Burn-In SOIC Sockets
Hin
ge E
nd
14X .050[ 1.27 ]
.350[ 8.89 ]
.640[ 16.26 ]
2x .200[ 5.08 ]
12X .050[ 1.27 ]
PCB Centerlineof Pattern
SocketOutline
2X .200[ 5.08 ]
.640[ 16.26 ]
.300[ 7.62 ]
.240[ 6.10 ]
.790[ 20.07 ]
.790[ 20.07 ]
PCB Centerlineof Pattern
SocketOutline
Hin
ge E
nd
.240[ 6.10 ]
216-7383-55-1902
214-7390-55-1902
.640[ 16.26 ]
2X .200[ 5.08 ]
.240[ 6.10] 8X Dia. .035 [ 0.89 ]
Minimum thru hole
6X .050[ 1.27 ]
Dia. .062 [ 1.57 ](Clearance hole for
mounting screw)
PCB Centerlineof Pattern.790
[ 20.07 ]
Hin
ge E
nd
SocketOutline .150
[ 3.81 ]
208-7391-55-1902
TS-0338-09Sheet 3 of 4
SocketOutline
.860[ 21.84 ]
PCB Centerlineof Pattern
Hin
ge E
nd
.804[ 20.42 ]
.404[ 10.26 ]
2X .200[ 5.08 ]
.350[ 8.89 ]
14X .050[ 1.27 ]
216-7224-55-1902
P.C. BOARD PATTERNS
14 Position8 Position
16 Position
.450[ 11.43 ]
.404[ 10.26 ]
2X .200[ 5.08 ]
.804[ 20.42 ]
PCB Centerlineof Pattern
SocketOutline
.860[ 21.84 ]
Hin
ge E
nd
18X .050[ 1.27 ]
220-7201-55-1902
PCB Centerlineof Pattern
SocketOutline
.860[ 21.84 ]
.400[ 10.16 ]
.804[ 20.42 ]
.404[ 10.26 ]
2x .200[ 5.08 ]
Hin
ge E
nd
218-7223-55-1902
18 Position 20 Position
16X .050[ 1.27 ]
Dia. .062 [ 1.57 ](Clearance hole for
mounting screw)
Dia. .062 [ 1.57 ](Clearance hole for
mounting screw)
Dia. .062 [ 1.57 ](Clearance hole for
mounting screw)
Dia. .062 [ 1.57 ](Clearance hole for
mounting screw)
Dia. .062 [ 1.57 ](Clearance hole for
mounting screw)
14X Dia. .035 [ 0.89 ]Minimum thru hole
16X Dia. .035 [ 0.89 ]Minimum thru hole
16X Dia. .035 [ 0.89 ]Minimum thru hole
18X Dia. .035 [ 0.89 ]Minimum thru hole 20X Dia. .035 [ 0.89 ]
Minimum thru hole
For technical, sales or ordering information call 800-328-0411or visit our website: http://www.3M.com/ehpd
(mm)
(.00)
(± .25) (± .13)
Tolerance
± .010 ± .005
.000
Tolerance
Dimension .00
(.0)
inch
3M Electronic Handling and Protection Division6801 River Place Blvd.Austin, TX 78726-9000
Test & Burn-In SOIC Sockets
TS-0338-09Sheet 4 of 4
.804[ 20.42 ]
2X .200[ 5.08 ]
.550[ 13.97 ]
.404[ 10.26 ]
24X Dia. .035 [ 0.89 ]Minimum thru hole
22X .050[ 1.25 ]
224-7397-55-1902
PCB Centerline of Pattern
SocketOutline
.920[ 23.36 ]
Hin
ge E
nd
26X .050[ 1.25 ]
.804[ 20.42 ]
.404[ 10.26 ]
.650[ 16.51 ]
Hin
ge E
ndPCB Centerlineof Pattern
28X Dia. .035 [ 0.89 ]Minimum thru hole
SocketOutline
228-7396-55-1902
28X Dia. .035 [ 0.89 ]Minimum thru hole
228-7474-55-1902
26X .050[ 1.25 ]
.650[ 16.51 ]
Hin
ge E
nd
PCB Centerlineof Pattern
SocketOutline
.920[ 23.36 ]
24 Position
28 Position
2X .200[ 5.08 ]
2X .200[ 5.08 ]
.920 [ 23.36 ]
.480[ 12.19 ]
.880[ 22.35 ]
Note: P.C. Board patterns are “component side”.
Dia. .062 [ 1.57 ](Clearance hole for
mounting screw)
Dia. .062 [ 1.57 ](Clearance hole for
mounting screw)
Dia. .062 [ 1.57 ](Clearance hole for
mounting screw)
For technical, sales or ordering information call 800-328-0411or visit our website: http://www.3M.com/ehpd
(mm)
(.00)
(± .25) (± .13)
Tolerance
± .010 ± .005
.000
Tolerance
Dimension .00
(.0)
inch
2
Table of ContentsBGA/LGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
PGA/IPGA/SPGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
DIP/Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
ZIP Strip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
SOIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Discrete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Plastic Properties Information . . . . . . . . . . . . . . . . . . . . . . . . 24
For the most current product and technical information, click on the product names within this PDF, which will take you to the specific 3M Textool Test and Burn-In Sockets product page on the website.
3M™ Textool™ Test and Burn-In Sockets
First to market in 1992 with BGA sockets, 3M continues to expand the product range and options available. The versatile product design and six product platforms enable quick-turn and low cost proliferation of new sizes. 3M provides reliable performance for testing and burn-in applications with a design that has been proven with years of customer experience. 3M can provide a socket for most types of BGA or LGA packages, standard or custom, in a variety of pitches. Reference the 3M Textool BGA Socket brochure for more detailed information on BGA sockets. Contact your local distributor or 3M sales representative for information.
Important Notes About 3M Textool Zero Insertion Pressure (ZIP) Sockets
1. Installation Instructions for Lever Actuated Zero Insertion Force Sockets
• When mounting to the PC board, the socket must be soldered with the contacts in the “OPEN” position.
• When mounting into a receptacle, it is recommended that the contacts remain in the “OPEN” position during insertion.
• When fastening sockets to PC boards with screws and nuts, these screws and nuts must be tightened prior to soldering, with the contacts in the “OPEN” position.
• High lead count sockets may have a tendency to rise during soldering operations. Care should be taken to prevent this from occurring.
• If hard wiring is to be used, wire no heavier than 30 gauge multi-strand should be considered to prevent damage to the contacts.
• Care should be taken to reduce the potential for solder flux from entering into the sockets during the soldering process.
2. Polyethersulfone Plastic
• Clean only with isopropyl alcohol or water and detergent.
3. Caution!• Overheating of product may release vapors which may cause eye
and respiratory irritation. Skin contact with heated product may cause burns.
4. Precautions• Provide appropriate local exhaust ventilation when product is heated.
Avoid skin contact with hot material. Wear appropriate gloves to prevent burns.
• Consult Material Safety Data Sheet for further information on health hazards, precautions and suggested first aid.
5. Product Information Source
For Material Safety Data Sheet contact: 3M Electronic Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 (800) 225-5373
3M™ Textool™ Test and Burn-In Sockets
Typical Part Number Identification
2 256-1386-00-19 02
Prefix2 – Socket
Numerical Sequence
No. Leads
Plastic MaterialContact and Plating Material
Dash No.00 thru 99 – Modifications(Assigned by 3M)
1
2
Open-Top Design • Accommodates a wide range of package thicknesses
without requiring socket adaptations• Allows excellent air flow around device• Includes a retractable locating guide for easy board
mounting, even with hundreds of leads
Vertical Actuation • Compatible with most robotic handlers• Easy manual operation
Normally Closed Contact Design • Dual beam contact delivers balanced, opposing forces
to solder ball with minimal shear stress• Contact tips touch ball above its center plane producing only
slight indentations and negligible ball deformation
Retainer Clip Feature
3M Textool Sockets are designed to function properly without the use of retainer clips. The retainer clip feature is desirable for high vibration/shock applications and with small or non-spherical solder balls. The purpose of the retainer clip feature is to retain the DUT in the socket should there be an event or conditions leading to dislodgement of the solder balls from the socket contacts. Retainer clips are custom-designed based on specific package dimensions and should only be considered for stable production applications where package dimensions are not expected to vary. In cases of non-spherical and small solder balls, 3M Technical Service may request package samples for fit analysis.
3M Textool BGA Open-Top Sockets, 0.65 mm Maximum Maximum Maximum Type Body Size (mm) Matrix Ball Count Status
I 12 x 12 17 x 17 289 Available II 17 x 17 25 x 25 625 Available III 21 x 21 31 x 31 961 Inquire*
Ordering Information
2 XXX-96 X X-XX-X X X 1Pin Count
Product Series Number
Product Platforms1 = Type I2 = Type II Board Locating Post
0 = Without1 = With (both alignment plate and base)2 = With (alignment plate only)3 = With (base only)
Retainer4 = Without (standard)5 = With
Solder Tail Length0 = 2.0 mm
Material Type1 = PES/BeCu/Au
Package Size / Matrix Variation
(Assigned by 3M)
Product Variation(Assigned by 3M)
3M™ Textool™ BGA/LGA Open-Top Sockets, 0.65 mm
*Note: At time of publication, Type III was not released for sale. Please contact 3M Customer Service for current availability.
3
3M™ Textool™ BGA Open-Top Sockets, 0.80 mm
Open-Top Design • Accommodates a wide range of package thicknesses
without requiring socket adaptations• Allows excellent air flow around device• Includes a retractable locating guide for easy board
mounting, even with hundreds of leads
Vertical Actuation • Compatible with most robotic handlers• Easy manual operation
Normally Closed Contact Design • Dual beam contact delivers balanced, opposing forces to
solder ball with minimal shear stress• Contact tips touch ball above its center plane producing only
slight indentations and negligible ball deformation
Retainer Clip Feature
3M Textool Sockets are designed to function properly without the use of retainer clips. The retainer clip feature is desirable for high vibration/shock applications and with small or non-spherical solder balls. The purpose of the retainer clip feature is to retain the DUT in the socket should there be an event or conditions leading to dislodgement of the solder balls from the socket contacts. Retainer clips are custom-designed based on specific package dimensions and should only be considered for stable production applications where package dimensions are not expected to vary. In cases of non-spherical and small solder balls, 3M Technical Service may request package samples for fit analysis.
3M Textool BGA Open-Top Sockets, 0.80 mm
Maximum Maximum Maximum Type Body Size (mm) Matrix Ball Count Status
I 12 x 12 13 x 13 169 Available II 17 x 17 19 x 19 361 Available III 21 x 21 25 x 25 625 Available IV 24 x 24 31 x 31 961 Inquire*
2 XXX-90 X X-XX-X X X 1Ordering Information
Pin Count
Product Series Number
Product Platforms1 = Type I2 = Type II3 = Type III Board Locating Post
0 = Without1 = With (both alignment plate and base)2 = With (alignment plate only)3 = With (base only)
Retainer4 = Without (standard)5 = With
Solder Tail Length0 = 2.0 mm1 - 1.0 mm
Material Type1 = PES/BeCu/Au
Package Size / Matrix Variation
(Assigned by 3M)
Product Variation(Assigned by 3M)
*Note: At time of publication, Type IV was not released for sale. Please contact 3M Customer Service for current availability.
4
3M™ Textool™ BGA Open-Top Sockets,1.0 mm
3M Textool BGA Open-Top Sockets, 1.0 mm Maximum Maximum Maximum Type Body Size (mm) Matrix Ball Count Status
0 19 x 19 17 x 17 289 Available I 29 x 29 27 x 27 729 Available II 40 x 40 39 x 39 1521 Available III 47.5 x 47.5 45 x 45 2025 Available
Open-Top Design • Accommodates a wide range of package thicknesses
without requiring socket adaptations• Allows excellent air flow around device• Includes a retractable locating guide for easy board
mounting, even with hundreds of leads
Vertical Actuation • Compatible with most robotic handlers• Easy manual operation
Normally Closed Contact Design • Dual beam contact delivers balanced, opposing forces to
solder ball with minimal shear stress• Contact tips touch ball above its center plane producing only
slight indentations and negligible ball deformation
Retainer Clip Feature
3M Textool Sockets are designed to function properly without the use of retainer clips. The retainer clip feature is desirable for high vibration/shock applications and with small or non-spherical solder balls. The purpose of the retainer clip feature is to retain the DUT in the socket should there be an event or conditions leading to dislodgement of the solder balls from the socket contacts. Retainer clips are custom-designed based on specific package dimensions and should only be considered for stable production applications where package dimensions are not expected to vary. In cases of non-spherical and small solder balls, 3M Technical Service may request package samples for fit analysis.
2 XXX-93 X X-XX-X X X XOrdering Information
Pin Count
Product Series Number
Product Platforms0 = Type 01 = Type I2 = Type II3 = Type III
Board Locating Post0 = Without1 = With (both alignment plate and base)2 = With (alignment plate only)3 = With (base only)
Retainer4 = Without (standard)5 = With
Solder Tail Length0 = 2.0 mm
Material Type1 = PES/BeCu/Au
Package Size / Matrix Variation (Assigned by 3M)
Product Variation(Assigned by 3M)
5
3M™ Textool™ BGA Open-Top Sockets,1.27 mm
3M Textool BGA Open-Top Sockets, 1.27 mm Maximum Maximum Maximum Type Body Size (mm) Matrix Ball Count Status
II 35 x 35 27 x 27 729 Available III 45 x 45 35 x 35 1225 Available
2 XXX-92 X X-XX-X X X X
Open-Top Design • Accommodates a wide range of package thicknesses
without requiring socket adaptations• Allows excellent air flow around device• Includes a retractable locating guide for easy board
mounting, even with hundreds of leads
Vertical Actuation • Compatible with most robotic handlers• Easy manual operation
Normally Closed Contact Design • Dual beam contact delivers balanced, opposing forces to
solder ball with minimal shear stress• Contact tips touch ball above its center plane producing only
slight indentations and negligible ball deformation
Retainer Clip Feature
3M Textool Sockets are designed to function properly without the use of retainer clips. The retainer clip feature is desirable for high vibration/shock applications and with small or non-spherical solder balls. The purpose of the retainer clip feature is to retain the DUT in the socket should there be an event or conditions leading to dislodgement of the solder balls from the socket contacts. Retainer clips are custom-designed based on specific package dimensions and should only be considered for stable production applications where package dimensions are not expected to vary. In cases of non-spherical and small solder balls, 3M Technical Service may request package samples for fit analysis.
Ordering Information
Pin Count
Product Series Number
Product Platforms2 = Type II3 = Type III
Board Locating Post0 = Without1 = With (both alignment plate and base)2 = With (alignment plate only)3 = With (base only)
Retainer4 = Without (standard)5 = With
Solder Tail Length0 = 2.4 mm
Material Type1 = PES/BeCu/Au
Package Size / Matrix Variation (Assigned by 3M)
Product Variation(Assigned by 3M)
6
• Modular construction allows for cost effective socket proliferation for standard and custom packages
• Coarse alignment on device body followed by a secondary fine alignment to the solder balls (BGA only)
• Flat contact head that provides for minimum solder ball deformation
• Can be adapted to either BGA or LGA formats• Available with inserts for mounting screws
(screws not included with socket)
2 XXX X-1381-XX-X X 0 1
Pin Count
Matrix Pattern Variation(Assigned by 3M)
Board Locating Post0 = Without1 = With
Threaded Inserts0 = Without 1 = With
Solder Tail Length0 = .10 [ 2.5 ]0 = .14 [ 3.5 ]
Material Type1 = PES/BeCu/Au
Product Variation(Assigned by 3M)
3M Textool BGA/LGA Lidded Sockets, 1.27 mm Maximum Maximum Maximum Maximum Pins Package Package Type Pitch Matrix Lead Count Size Thickness Lid Style
TYPE II 1.27 mm 27 x 27 729 38 x 38 mm 5.00 mm Standard TYPE II 1.27 mm 27 x 27 729 38 x 38 mm 3.50 mm Low Force & Low Profile TYPE III 1.27 mm 39 x 39 1521 50 x 50 mm 8.00 mm Low Force TYPE III 1.27 mm 39 x 39 700 50 x 50 mm 4.00 mm Low Force & Low Profile
3M™ Textool™ BGA/LGA Standard Lidded Sockets,1.27 mm Type II
Ordering Information
7
3M™ Textool™ BGA/LGA Standard Lidded Sockets,1.27 mm Type II
3M Textool BGA/LGA Standard Lidded Sockets, 1.27 mm Type II Device Device Device Device Alignment Type Pitch (mm) Length (mm) Width (mm) Matrix Method Accepted
1.27 19.00 19.00 12 x 12 BALL BALL 1.27 20.95 24.07 14 x 17 BALL BALL 1.27 20.95 24.70 16 x 19 BODY BALL or PAD (LGA) 1.27 21.00 21.00 16 x 16 BALL BALL 1.27 23.00 23.00 15 x 15 BODY BALL or PAD (LGA) 1.27 23.00 23.00 17 x 17 BALL BALL 1.27 23.00 23.00 18 x 18 BALL BALL 1.27 24.70 24.70 19 x 19 BALL BALL 1.27 25.00 25.00 19 x 19 BALL BALL 1.27 27.00 27.00 19 x 19 BODY BALL or PAD (LGA) 1.27 27.00 27.00 20 x 20 BALL BALL 1.27 27.00 27.00 21 x 21 BALL BALL 1.27 29.00 29.00 21 x 21 BALL BALL 1.27 29.00 29.00 22 x 22 BALL BALL 1.27 30.00 30.00 23 x 23 BALL BALL 1.27 31.00 31.00 22 x 22 BALL BALL 1.27 31.00 31.00 23 x 23 BALL BALL 1.27 31.00 31.00 24 x 24 BALL BALL 1.27 32.00 32.00 24 x 24 BODY BALL or PAD (LGA) 1.27 32.33 32.33 25 x 25 BALL BALL 1.27 32.33 32.33 25 x 25 BODY BALL or PAD (LGA) 1.27 33.00 33.00 25 x 25 BALL BALL 1.27 33.00 33.00 26 x 26 BALL BALL 1.27 33.71 33.71 24 x 24 BALL BALL 1.27 35.00 35.00 24 x 24 BODY BALL 1.27 35.00 35.00 25 x 25 BALL BALL 1.27 35.00 35.00 26 x 26 BALL BALL 1.27 35.00 35.00 27 x 27 BALL BALL
8
3M™ Textool™ BGA/LGA Low Closing Force Lidded Sockets,1.27 mm Type II
Low Profile Version• Modular construction allows for cost effective socket
proliferation for standard and custom packages• Coarse alignment on device body followed by a secondary
fine alignment to the solder balls• Flat contact head that provides for minimum solder ball
deformation• Can be adapted to either BGA or LGA formats• Built-in alignment plates• Available with screw inserts (screws not included)• Lid closing force reduction ratio of 13-to-1• Accepts maximum pin count of 729 and maximum package
thickness of 3.50 mm• Low profile lid reduces total socket height• Recommended for sockets with lead counts of >300
3M Textool BGA/LGA Low Closing Force Lidded Sockets, 1.27 mm Type II Device Device Device Device Next Alignment Device Type Pitch (mm) Length (mm) Width (mm) Matrix Method Accepted
1.27 19.00 19.00 12 x 12 BALL BALL 1.27 20.95 24.07 14 x 17 BALL BALL 1.27 20.95 24.70 16 x 19 BODY BALL or PAD (LGA) 1.27 21.00 21.00 16 x 16 BALL BALL 1.27 23.00 23.00 15 x 15 BODY BALL or PAD (LGA) 1.27 23.00 23.00 17 x 17 BALL BALL 1.27 23.00 23.00 18 x 18 BALL BALL 1.27 24.70 24.70 19 x 19 BALL BALL 1.27 25.00 25.00 19 x 19 BALL BALL 1.27 27.00 27.00 19 x 19 BODY BALL or PAD (LGA) 1.27 27.00 27.00 20 x 20 BALL BALL 1.27 27.00 27.00 21 x 21 BALL BALL 1.27 29.00 29.00 21 x 21 BALL BALL 1.27 29.00 29.00 22 x 22 BALL BALL 1.27 30.00 30.00 23 x 23 BALL BALL 1.27 31.00 31.00 22 x 22 BALL BALL 1.27 31.00 31.00 23 x 23 BALL BALL 1.27 31.00 31.00 24 x 24 BALL BALL 1.27 32.00 32.00 24 x 24 BODY BALL or PAD (LGA) 1.27 32.33 32.33 25 x 25 BALL BALL 1.27 32.33 32.33 25 x 25 BODY BALL or PAD (LGA) 1.27 33.00 33.00 25 x 25 BALL BALL 1.27 33.00 33.00 26 x 26 BALL BALL 1.27 33.71 33.71 24 x 24 BALL BALL 1.27 35.00 35.00 24 x 24 BODY BALL 1.27 35.00 35.00 25 x 25 BALL BALL 1.27 35.00 35.00 26 x 26 BALL BALL 1.27 35.00 35.00 27 x 27 BALL BALL
2 XXX X-1386-XX-X X 0 1
Pin Count
Matrix Pattern Variation(Assigned by 3M)
Board Locating Post0 = Without1 = With
Threaded Inserts0 = Without 1 = With
Solder Tail Length0 = 2.5 mm0 = 3.6 mm
Material Type1 = PES/BeCu/Au
Product Variation(Assigned by 3M)
Ordering Information
9
3M™ Textool™ BGA/LGA Low Closing Force Lidded Sockets,1.27 mm Type III
2 XXX X-1381-XX-X X 0 1
Pin Count
Matrix Pattern Variation(Assigned by 3M)
Board Locating Post0 = Without1 = With
Threaded Inserts0 = Without 1 = With
Solder Tail Length0 = .11 [ 2.5 ]
Material Type1 = PES/BeCu/Au
Product Variation(Assigned by 3M)
Standard Profile Version• Modular construction allows for cost effective socket
proliferation for standard and custom packages• Coarse alignment on device body followed by a secondary
fine alignment to the solder balls• Flat contact head that provides for minimum solder ball
deformation• Can be adapted to either BGA or LGA formats• Built-in alignment plates• Available with screw inserts as standard option• Lid closing force reduction ratio of 50-to-1• Accepts maximum pin count of 1521 and maximum device
thickness of 8.00 mm
3M Textool BGA/LGA Lidded Sockets, 1.27 mm Type III Device Device Device Device Next Alignment Device Type Pitch (mm) Length (mm) Width (mm) Matrix Method Accepted
1.27 37.50 37.50 27 x 27 BALL BALL 1.27 37.50 37.50 29 x 29 BALL BALL 1.27 40.00 40.00 29 x 29 BALL BALL 1.27 40.00 40.00 30 x 30 BALL BALL 1.27 40.00 40.00 31 x 31 BALL BALL 1.27 41.00 41.00 31 x 31 BALL BALL 1.27 42.00 42.00 32 x 32 BODY BALL or PAD (LGA) 1.27 42.50 42.50 31 x 31 BALL BALL 1.27 42.50 42.50 32 x 32 BALL BALL 1.27 42.50 42.50 33 x 33 BALL BALL 1.27 43.00 43.00 33 x 33 BALL BALL 1.27 45.00 45.00 33 x 33 BALL BALL 1.27 45.00 45.00 34 x 34 BALL BALL 1.27 45.00 45.00 35 x 35 BALL BALL 1.27 47.50 47.50 35 x 35 BALL BALL 1.27 47.50 47.50 36 x 36 BALL BALL 1.27 47.50 47.50 37 x 37 BALL BALL 1.27 50.00 50.00 39 x 39 BALL BALL
Ordering Information
10
3M™ Textool™ BGA/LGA Low Closing Force Lidded Sockets,1.27 mm Type III
2 XXX X-1387-XX-X X 0 1
Pin Count
Matrix Pattern Variation(Assigned by 3M)
Board Locating Post0 = Without1 = With
Threaded Inserts1 = With
Solder Tail Length0 = 2.8 mm
Material Type1 = PES/BeCu/Au
Product Variation(Assigned by 3M)
Low Profile Version• Modular construction allows for cost effective socket
proliferation for standard and custom packages• Coarse alignment on device body followed by a secondary
fine alignment to the solder balls (BGA only)• Flat contact head that provides for minimum solder ball
deformation• Can be adapted to either BGA or LGA formats• Built-in alignment plates• Available with screw inserts as standard option• Lid closing force reduction ratio of 50-to-1• Accepts maximum pin count of 700 and maximum
device thickness of 4.00 mm
3M Textool BGA/LGA Low Profile Lidded Sockets, 1.27 mm Type III Device Device Device Device Next Alignment Device Type Pitch (mm) Length (mm) Width (mm) Matrix Method Accepted
1.27 37.50 37.50 27 x 27 BALL BALL 1.27 37.50 37.50 29 x 29 BALL BALL 1.27 40.00 40.00 29 x 29 BALL BALL 1.27 40.00 40.00 30 x 30 BALL BALL 1.27 40.00 40.00 31 x 31 BALL BALL 1.27 41.00 41.00 31 x 31 BALL BALL 1.27 42.00 42.00 32 x 32 BODY BALL or PAD (LGA) 1.27 42.50 42.50 31 x 31 BALL BALL 1.27 42.50 42.50 32 x 32 BALL BALL 1.27 42.50 42.50 33 x 33 BALL BALL 1.27 43.00 43.00 33 x 33 BALL BALL 1.27 45.00 45.00 33 x 33 BALL BALL 1.27 45.00 45.00 34 x 34 BALL BALL 1.27 45.00 45.00 35 x 35 BALL BALL 1.27 47.50 47.50 35 x 35 BALL BALL 1.27 47.50 47.50 36 x 36 BALL BALL 1.27 47.50 47.50 37 x 37 BALL BALL 1.27 50.00 50.00 39 x 39 BALL BALL
Ordering Information
11
3M™ Textool™ BGA/LGA Lidded Sockets,1.0 mm
The modular design of the 3M Textool BGA/LGA Lidded Socket, 1.0 mm enables 3M to cost effectively provide a socket that mates with almost any 1.0 mm pitch package. The nest "Package Guide" can be adjusted to match the specific body size and matrix of your particular package. The socket contacts are inserted to match the ball count and pattern of your package.
3M Textool BGA/LGA Lidded Sockets, 1.0 mm Socket Max. Package Max. Max. Lid Series Product Number Type Body Size Matrix Pin Count Feature BGA LGA Status
I 23 x 23 21 x 21 441 with Lid 9110 9115 Available 23 x 23 21 x 21 441 w/o Lid 9114 9119 Available
II 40 x 40 39 x 39 1521 with Lid 9120 9125 Available 40 x 40 39 x 39 1521 w/o Lid 9124 9129 Available III 47.5 x 47.5 45 x 45 2025 with Lid 9130 9135 Available 47.5 x 47.5 45 x 45 2025 w/o Lid 9134 9139 Available
Ordering Information
Material Type1 = PES/BeCu/Au
Solder Tail Length0 = 2.8 mm
Threaded Insert0 = Without1 = With
Board Locating Post0 = Without1 = With (Alignment Plate Only) Standard
Pin Count
Product Variation(Assigned by 3M)
Product Series Number9110 = Type I BGA w/ lid9114 = Type I BGA w/o lid9115 = Type I LGA w/ lid9119 = Type I LGA w/o lid9120 = Type II BGA w/ lid9124 = Type II BGA w/o lid9125 = Type II LGA w/ lid9129 = Type II LGA w/o lid9130 = Type III BGA w/lid9134 = Type III BGA w/o lid9135 = Type III LGA w/ lid9139 = Type III LGA w/o lid
2 XXX-91XX-XX-X X X X
12
3M™ Textool™ PGA Sockets
3M Textool PGA Sockets are well known for their durability and reliability in test or burn-in of devices in PGA packages or other packages with pin outs in a matrix format. They are available in matrices from 10 x 10 through 25 x 25 on .100" (2.54 mm) centers. 3M also offers three interstitial, staggered, .100" (2.54 mm) centers (effective pitch 70.7 mil). One with 17 x 17 outer matrix and an inner matrix of 16 x 16, one with an outer matrix of 19 x 19 and an inner matrix of 18 x 18 and the other with an outer matrix of 23 x 23 and an inner matrix of 22 x 22. In addition, we offer an SPGA socket with 37 x 37 matrix with .050" (1.27 mm).
• Lever actuated zero insertion force mechanism • Rugged 3-plate construction for durability and electrical
reliability • Available with flush handle option for use with test probes
and ease of board stacking• Available in 10 x 10 through 25 x 25 matrices • Contacts, handles, top-plate and cam plate are replaceable Note: Additional ten hole plugs can be ordered separately,
part #200-4660-14-1900
2 XXX-63XX-XXX-1902
Number of Contacts
0UA = Molded Pattern, Standard Handle
9UA = All holes open, Standard Handle
1902 PES with / 30 µ” Au/Ni on BeCu
6310 – 10 x 106311 – 11 x 116313 – 13 x 136315 – 15 x 156317 – 17 x 176319 – 19 x 196321 – 21 x 216325 – 25 x 25
Ordering Information
13
3M™ Textool™ PGA Kit Sockets
• Available in 10 x 10 matrix through 25 x 25 matrix • Used when only a few test sockets are needed • Provides individual components ready for assembly • Open pattern top plate; load only those contacts needed for
your specific device pin pattern
Part Number Matrix Size Description
200-6310-9UN-1900 10 x 10 200-6311-9UN-1900 11 x 11200-6313-9UN-1900 13 x 13200-6315-9UN-1900 15 x 15200-6317-9UN-1900 17 x 17 Socket Kit w/o Contacts200-6319-9UN-1900 19 x 19200-6321-9UN-1900 21 x 21 200-6325-9UN-1900 25 x 25
300-6300-CNA-0002B Each Contact - BeCu/Au Plated
200-4660-14-1900 Set of 10 Extra Hole Plugs
Interstitial PGA Socket Outer Matrix 17 x 17• 17 x 17 outer matrix with 16 x 16 inner staggered matrix
holds up to 432 leads • Lever actuated zero insertion force mechanism • Rugged 3-plate construction for durability and electrical
reliability • Accommodates two lead diameter variations .25 - .40 mm (.010" - .016") and .35 - .51 mm (.014" - .020")
2 XXX-1353-XX-3302
Number of Contacts(432 maximum)
Lead Diameter Tail Variations:00 = 0.25 mm - 0.40 mm – 3.3 mm tail50 = 0.35 mm - 0.51 mm – 3.3 mm tail60 = 0.35 mm - 0.51 mm – 7.0 mm tail70 = 0.35 mm - 0.51 mm – 7.8 mm tail80 = 0.35 mm - 0.51 mm – 3.5 mm tail
3M™ Textool™ Interstitial PGA Sockets
Ordering Information
14
3M™ Textool™ Interstitial PGA Sockets
Interstitial PGA Socket Outer Matrix 19 x 19• 19 X 19 outer matrix with 18 X 18 inner
staggered matrix holds up to 685 leads• Lever actuated, zero insertion force mechanism• Rugged, 3-plate construction for durability and electrical reliability• Accommodates two lead diameter variations .25 - .40 mm (.010" - .016") inquire* .35 - .51 mm (.014" - .020") available *Note: Please contact 3M Customer Service for
availability.
2 XXX-1358-XX-1902
Number of Contacts(685 maximum)
Lead Diameter Variations:00 = 0.10” - .016” [0.25 mm - 0.40 mm] – 2.0 mm tail50 = 0.14” - .020” [0.25 mm - 0.51 mm] – 2.0 mm tail70 = 0.14” - .020” [0.25 mm - 0.51 mm] – 2.8 mm tail80 = 0.14” - .020” [0.35 mm - 0.51 mm] – 3.5 mm tail
Interstitial PGA Socket Outer Matrix 23 x 23• 23 x 23 outer matrix with 22 x 22 inner staggered matrix
holds up to 792 leads• Lever actuated zero insertion force mechanism• Rugged 3-plate construction for durability and electrical
reliability• Accommodates two lead diameter variations
.25 - .40 mm (.010" - .16")
.35 - .51 mm (.014" - .020")
2 XXX-1357-XX-1902
Number of Contacts(792 maximum)
Lead Diameter Variations:00 = 0.10” - .016” [0.25 mm - 0.40 mm] – 3.3 mm tail50 = 0.14” - .020” [0.35 mm - 0.51 mm] – 3.3 mm tail
Ordering Information
Ordering Information
15
3M™ Textool™ Shrink PGA Sockets
• Applicable package for 1.27 mm (.050") pitch PGA• Zero insertion force• Double mating contact• Lever actuation mechanism • Maximum grid 37 x 37 and lead count of 600
2 XXX-1361-SX-3302
Number of Contacts
Solder Tail Length:A = 2.8 mmB = 4.3 mmC = 6.0 mm
Ordering Information
16
3M™ Textool™ DIP Sockets and Receptacles
The classic 3M Textool ZIP DIP Sockets have reliably served the needs of semiconductor producers and users for over twenty years. For test, burn-in or programming of devices in dual-in-line packages, the lever actuated zero insertion force mechanism allows easy insertion and withdrawal without lead damage. Companion receptacles allow easy socket replacement for high use applications such as DUT boards and programming.
Use of receptacles can be a very cost-effective and practical approach for high-use applications such as programming. A worn-out or damaged socket can be simply unplugged and replaced with a new one without the expense of downtime or replacing the entire board.
DIP Sockets .100" (2.54 mm) • For DIPs with .100" (2.54 mm) lead spacing • Pin counts for 14-64 leads• Lever actuated zero insertion force mechanism • Socket contact point of .110" (2.79 mm) below top surface of socket
Ordering Information
17
3M™ Textool™ DIP Sockets
Universal DIP Sockets .100" (2.54 mm) • For DIPs with .100" (2.54 mm) lead spacing • Extra-wide contact zone allows insertion of any DIP package
with distance between rows from .300" (7.62 mm) through .600" (15.24 mm)
• Lever actuated zero insertion force mechanism • Socket contact point of .090" (2.29 mm) below top surface
of socket
Socket Contact Mating Receptacle Part Number Quantity Part Number
224-1286-00-0602J 24 224-1275-XX-0602J
224-1371-00-0602J 28 224-1277-XX-0602J
224-1287-00-0602J 32 224-1285-XX-0602J
224-1288-00-0602J 40 224-1280-XX-0602J
224-1289-00-0602J 42 224-1281-XX-0602J
Contact Tail Length/Mounting Flanges:XX = 09 Solder Tail.13 [ 3.3 ] w/flanges = 19 Wire Wrap Tail .62 [ 15.8 ] w/flanges = 29 Solder Tail .13 [ 3.3 ] w/out flanges = 39 Wire Wrap Tail .62 [ 15.8 ] w/out flanges
DIP Sockets .070" (1.78 mm) • For DIPs with .070" (1.78 mm) lead spacing • Pin counts from 28 through 90 leads• Lever actuated zero insertion force mechanism • Socket contact point of .090" (2.29 mm) below top
surface of socket
Socket Contact Mating Receptacle Part Number Quantity Part Number
228-1290-00-0602J 28 228-1290-XX-0602J
232-1291-00-0602J 32 NOT AVAILABLE
242-1293-00-0602J 42 242-1293-XX-0602J
256-1292-00-0602J 56 NOT AVAILABLE
264-1300-00-0602J 64 264-1300-XX-0602J
290-1294-00-3302J 90 290-1294-XX-0602J
Contact Tail Length/Mounting Flanges:XX = 09 Solder Tail w/flanges = 29 Solder Tail w/flanges
18
3M™ Textool™ DIP Sockets
DIP Socket Receptacles• Matching receptacle for most available ZIP DIP Socket,
including Universal DIP and Shrink DIP • Mounting flanges hold receptacle to board• Pre-tapped holes in receptacle body mate with screw-hole
in socket to hold socket firmly to receptacle (two screws provided with each receptacle)
• Available in wire-wrap and solder-tail options, with and without mounting flanges
Ordering Information
19
3M™ Textool™ ZIP Strip/Flat Pack Sockets
Socket Contact Part Number Quantity
210-2599-00-0602 10
220-2600-00-0602 20
224-5809-00-0602 24
232-2601-00-0602 32
236-6225-00-0602 36
3M Textool ZIP Strip/Flat Pack Sockets are a very versatile family of sockets available in a variety of formats. Used singly, they mate with single-in-line or staggered-in-line packages. Used in pairs, they will interconnect a variety of non-standard package formats with leads extending from two sides of the package, in axial or radial lead configurations, or in-line or staggered pin outs. The lever actuated zero insertion force mechanism allows easy insertion and withdrawal without lead damage.
In-Line ZIP Strip 100" (2.54 mm) • For single-in-line packages on .100" (2.54 mm) centers • Can be used in sets of two or more to create a socket for
non-standard leaded packages on .100" (2.54 mm) centers • ZIP Strip pin counts from 10 through 36 leads• Lever actuated zero insertion force mechanism • Accepts pins up to .025" (0.6 mm) square • Socket contact point of .085" (2.2 mm) below top
surface of socket
20
3M™ Textool™ ZIP Strip Sockets
Staggered ZIP Strip Sockets, .050" (1.27 mm) x .100" (2.54 mm) • For devices with .050" (1.27 mm) lead centers formed
in staggered rows with .100" (2.54 mm) between centers and rows
• Socket with top-plate cover requires vertical insertion of leads
• Frequently used in pairs to handle devices with standard leads on opposite sides of the package
• Order left- and right-hand strips separately to obtain a complete pair
• Lever actuated zero insertion force mechanism
Socket Contact Part Number Quantity
232-1270-01-0602J 32
232-1270-02-0602J 32
Contact Pattern: See Tech Sheet
Ordering Information
21
3M™ Textool™ ZIP Strip Sockets
Axial Lead ZIP Strip/Flat Pack Sockets, .050" (1.27 mm) x .100" (2.54 mm) • For devices with .050" (1.27 mm) lead centers unformed or
extending axially from package • Socket without top-plate cover enables horizontal insertion
of leads • Frequently used in pairs to handle any non-standard flat
pack with leads on .050" (1.27 mm) centers • Order left- and right-hand versions separately to obtain a
complete pair • Lever actuated zero insertion force mechanism • Accepts pins up .014" (0.36 mm) to .025" (0.64 mm)
square
Socket Contact Part Number Quantity
234-3034-01-0602 34
234-3034-02-0602 34
235-3019-01-0602 35
235-3019-02-0602 35
251-5949-01-0602 51
251-5949-02-0602 51
Ordering Information
Contact Pattern: See Tech Sheet
Staggered ZIP Strip Sockets• For devices with .050" (1.27 mm) lead centers formed
in staggered rows with .100" (2.54 mm) between centers (in same rows) and .075" (1.90 mm) between rows
• Frequently used in pairs to handle devices with staggered leads on opposite sides of the package
• Order left- and right-hand strips to obtain a complete pair • Lever actuated zero insertion force mechanism
Socket Contact Part Number Quantity
239-5605-01-0602 39
239-5605-02-0602 39
255-7322-01-0602 55
255-7322-02-0602 55
Ordering Information
Contact Pattern: See Tech Sheet
22
3M™ Textool™ SOIC Sockets
A user friendly, compact size 3M Textool Lidded Socket is available for SOIC gull wing packages on 50 mil centers.
• Lid can be actuated from top or front and is compatible with automated load/unload equipment
• Compact envelope and side-to-side stackability maximize board density
• Tweezer slot for easy manual loading/unloading • Lid applies 80 grams normal force per lead for maximum
electrical reliability • Accepts Gull Wing JEDEC device sizes in .150" (3.81 mm)
and .300" (7.62 mm) body widths
Part Number Leads SOIC Body Width
208-7391-55-1902 8 .150 [ 3.81 ]
214-7390-55-1902 14 .150 [ 3.81 ]
216-7383-55-1902 16 .150 [ 3.81 ]
216-7224-55-1902 16 .300 [ 7.62 ]
218-7223-55-1902 18 .300 [ 7.62 ]
220-7201-55-1902 20 .300 [ 7.62 ]
224-7397-55-1902 24 .300 [ 7.62 ]
228-7396-55-1902 28 .300 [ 7.62 ]
228-7474-55-1902 28 .330 [ 8.38 ]
Ordering Information
23
Laser Diode Sockets• Compact miniature socket size for maximum board density • Accommodates most TO package formats with pin circle
options of .079" (2.0 mm) or .100" (2.54 mm), including popular laser diode devices with .018” (0.46 mm) diameter leads
• Three and four lead options available • Funneled entry holes to assist lead insertion
Part Number Contact Qty. Pin Circle Mounting Flange
203-6585-00-0602J 3 .100 [ 2.54 ] Yes
203-6585-50-0602J 3 .100 [ 2.54 ] No
203-6970-00-0602J 3 .079 [ 2.0 ] Yes
203-6970-50-0602J 3 .079 [ 2.0 ] No
204-6585-00-0602J 4 .100 [ 2.54 ] Yes
204-6585-50-0602J 4 .100 [ 2.54 ] No
204-6585-00-0602J 4 .079 [ 2.0 ] Yes
204-6970-50-0602J 4 .079 [ 2.0 ] No
3M™ Textool™ Discrete Sockets
Power In-Line Sockets
• Accepts a wide variety of in-line devices up to three leads including TO-220 with lead cross sections that fit within a diameter range of .020”-.045” (0.51-1.14 mm)
• Kelvin contacts • Body and contacts are repairable • Two slotted-out entry ports accept devices with .075"
(1.90 mm) to .200" (5.1 mm) between leads • Must be mounted to board with screws• Temperature rating 125°C
Ordering Information
203-2737-55-1102
24
THERMAL
Heat Deflection Temp 264 PSI °F 365 420 505 410 530
Thermal Conductivity BTU-IN HR. FT. 2F 2.2 1.1 3.1 1.5 —
Coeff. of Linear Exp. IN/IN/F 1.4 x 10-5 — 1.5 x 10-5 1.1 x 10-5 1.7 x 10-5
Flammability — 94V-0 94V-0 94V-0 94V-0 94V-0
3M™ Textool™ Typical Plastic Properties
PLASTIC MATERIAL POLYETHER- POLYPHENYLENE- (TEXTOOL PART I.D.) *POLYSULFONE SULFONE SULFIDE POLYETHERIMIDE Physical Units (-006) (-019) (-011) (-033)
Specific Gravity — 1.45 1.60 1.65 1.51
Water Absorption 24 Hours 73°F % 0.20 .34 .01 .18
Operating Temperature °C Consult the specific Product Data Sheet
*Clean polysulfone material only with methyl alcohol or water and detergent.
MECHANICAL
Tensile Strength PSI 18,000 18,000 23,000 24,500
Elongation % 3.0 1-3 3-4 3
Flexural Strength PSI 24,000 27,000 32,000 37,000
Flexural Modulus PSI 1,200,000 1,220,000 1,800,000 1,230,000
Compressive Strength PSI 24,000 — 24,700 23,500
Izod Impact Notched FT-LBS/IN 1.8 1.4 1.5 1.7
Rockwell Hardness — M-92 — R-123 M-125
ELECTRICAL
Dielectric Strength S/T VOLTS/MIL 480 440 375 630 560
Dielectric Constant 106 Hz — 3.49 4.17 3.80 3.5 —
Dissipation Factor 106 Hz — 0.0049 0.0094 0.0013 .0015 —
Arc Resistance SECS 115 121 50 85 —
Volume Resistivity OHMS-CM 1017 1015 - 1016 1016 3 x 1016 1017
3M and Textool are trademarks of 3M.
3Electronics6801 River Place Blvd.Austin, TX 78726-9000www.3M.com/electronics1-800-225-53731-800-932-9373 (fax)
© 3M 2005
Important NoticeAll statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.
For technical, sales or ordering information, contact your local 3M distributor or 3M Customer Service at:
Phone 1-800-225-5373 Fax 1-800-932-9373
top related