3d printed conceptual site models (csms) - case studies

3-D Printed Conceptual Site Model Case Studies

Contact Chapman Ross for more information:cross@geosyntec.com

978-206-5779

Case Study #1EPA Region 4 NAPL and Geology Model

3-D Printed Conceptual Site Models

Virtual 3-D Model

3-D Printed Desktop Model

3-D Printed Desktop Scale Model Front View Showing Geology and NAPL

3-D Printed Desktop Scale Model Front View Showing Geology – Large NAPL Removed

3-D Printed Desktop Scale Model Close-up of Geology Layers and NAPL Insets

Case Study #2Distribution of ZVI in Clay Till

3-D Printed Conceptual Site Models

Virtual 3-D Model

(created in EVS)

3-D Printed Model

3-D Printed Conceptual Site Models Distribution of ZVI in Clay Till

3-D Printed Model

3-D printed model shows distribution of zero-valent iron (ZVI) layers

emplaced in clay using jet injection.

Case Study #368th Street Landfill Superfund Site

3-D Printed Conceptual Site Models

3-D Printed Conceptual Site Models 68th Street Landfill Superfund Site

Bottom Layer:Clay Aquitard

Middle Layer:Water Table w/ Site Boundary

Top Layer:Ground Surface

w/ Site Boundary

Case Study #4Landfill Scale Model

3-D Printed Conceptual Site Models

3-D Surface (AutoCAD)

3-D Printed Scale Model

3-D Printed Conceptual Site Models Landfill Scale Model and Block Model

Block Model:Liner System Detail

Scale Model: Final Grades and Site

Topography