304 stainless steel self-tapping fasteners jz3 and jt3 downloads/ej… · self-tapping fasteners...
Post on 17-Apr-2020
8 Views
Preview:
TRANSCRIPT
304 Stainless Steel Self-tapping FastenersFor roofing and cladding
Call: 262-612-3550 Email infoUS@ejot.com www.ejot-usa.comEJOT SAPHIR® Self-tapping Fasteners
PRODUCT GROUP A range of fasteners specifically designed for use in roofing and cladding.
DESIGN The thread forms are designed to provide maximum mechanical performance with ease of installation.
ASSEMBLY Where specified they are assembled with a high quality metal and EPDM vulcanizied sealing washer ensuring a safe seal every time.
FINISH The specified fasteners have a zinc or organic finish for maximum corrosion resistance in their given application.
COLOR MATCHING For color matching and added corrosion resistance it is recommended that, when used in external applications, our fasteners be capped with EJOT push-on caps.
Self-tapping FastenersFor roofing and cladding
Effective Clamping Thickness (ECT) is the total thickness
of the build up to be fixed.
Embedment (EMB) figures relate to depth into substrate
(not including clamp pieces).
EJOT product codes explained:
Self-tapping Fastener JZ 2 - 6.3 x 19 - A 15
Product type
EJOT trade mark
Thread Form
Material
Fastener øLength
Bonded washer type
Washer ø
General building authorities approvals (abZ)
General building authorities approvals
General building authority approvals are granted for construction products and types of construction for which there are no generally acknowledged rules of technology, DIN standards in particular, or which deviate considerably from them.
General building authorities approvals are granted by the Deutsche Institut für Bautechnik (DIBt) for all federal states. They are an assessment of the usability or applicability of the approval subject with regards to the building authorities requirements.
General building authorities test certificates (abP)
General building authorities test certificate A general building authorities test certificate is proof of usability granted for:
• construction products which do not necessitate the compliance with significant requirements to the safety of structural components or
• for components that can be evaluated according to generally approved test methods (§ 19 Abs. 1 Musterbauordnung).
The building code A part 1, part 2 and part 3 lists for which product a general building authorities mtest certificate can be granted.
Only inspection authorities approved by the DIBt or another building authority are able to grant general building authorities test certificates.
European Technical Approvals / Assessments (ETA)
Z-14.1-4 Fasteners for structures with “cold profiles” made of sheet steel - in particular profiled steel panels
Z-14.1-421 Wall cassette system Isover Metac WS
Z-14.4-426
Self-drilling screws for fixing aluminium clips for building authorities approved standing seam sheets, linear timber components with a min. thickness of 40 mm and other metal parts to substructures made of steel, aluminium or wood-based materials.
Z-14.4-532 Solar Fastening System for fixing solar installations
Z-14.4-779 Thread-forming screws for fastening sandwich panels to steel or timber substructures
Z-21.8-1265 KERI rain screen anchor – rain screen protection anchor for three-layer external wall panels
Z-21.2-1652 EJOT VSD – cavity wall repair anchor for subsequent installation of outer sheet
Z-31.4-174 Fibre cement corrugated profile 177/51 P5 and P6 with polypropylene strip insert (Eternit)
Z-50.4-337 Panel material Max Exterior F - Hexa for steps, platforms and balcony boards (FunderMax)
Z-30.3-6 Products, fasteners and components made of corrosion-resistant steels
Z-14.1-537 Mechanical fasteners for fixing aluminium components to each other, or with aluminium, steel or timber substructures
ETA-13/0177 Fasteners for sandwich panels
ETA-07/0013 Fastening elements for roofing membrane systems
ETA-16/0089 Chemical anchors for installation into masonry
ETA-16/0107 Chemical anchors for installation into concrete
ETA-08/0040 Mechanical fasteners made of steel (tie pin) in combination with installation tools
ETA-14/0219 Anchor bolts for installation into cracked and non-cracked concrete (BA-V; BA-F; BA-E; BA-E HCR)
ETA-10/0200 Fasteners for metal components and sheet metal
ETA-10/0305 SDF-10V and SDF-10H plastic anchors for multiple use in concrete and masonry for non-structural applications
ETA-12/0502 SDP-10G plastic anchor for multiple fixing of non-load-bearing systems into aerated concrete
ETA-15/0027 Plastic anchors SDF-14A for multiple fixing of non-load-bearing systems into concrete, masonry and aerated concrete
ETA-15/0387 Plastic anchors SDF-8V for multiple fixing of non-load-bearing systems into concrete and masonry
ETA-06/0259 Deformation-controlled expansion anchor for multiple fixing of non-load-bearing systems into concrete (ceiling nail)
ETA-13/0441 Deformation-controlled expansion anchor for multiple fixing of non-load-bearing systems into concrete (LAL+l)
ETA-13/0442 Deformation-controlled expansion anchor for fastening in non-cracked concrete (LAL+)
ETA-15/0514 Screw anchor
ETA-16/0123 Screw anchor
P-BWU02-148007Self-drilling screws for fixing aluminium wall brackets to substructures made of aluminium support profile for rear-ventilated facade cladding (JT4-4-4.8xL)
P-BWU02-148008 Fixing aluminium structures to rear-ventilated facade cladding (JZ3-6.3xL; JB3-6.3xL; JA3-6.5xL; JT3-3-5.5xL)
P-BWU02-148004Self-drilling screws for fixing aluminium and stainless steel wall brackets to aluminium support profile substructures for rear-ventilated facade cladding ((JT4/JT9)-3H/5-5.5x19; (JT4/JT9)-3H/7-5.5x21)
P-BWU02-16812Self-drilling screws for fixing wooden slats to substructures made of aluminium support profile for regulated rear-ventilated facade cladding according to DIN 18516-1 (JT4-S-2-4.8xL)
P-BWU02-178002Self-drilling screws for fixing aluminium and stainless steel wall brackets to aluminium bearing profile substructures for rear-ventilated facade cladding (VARIO)
ICC-ES Evaluation ReportFile no. 16-07-07 Pending
ETA-10/0200
European Technical Approvals/ Assessments are proof for the performance of a construction product within the sense of the Construction Products Directive. In Germany, ETAs are transposed by the Bauproduktengesetz (Construction Products Law). The ETA is based on tests, examinations and a technical assessment by approval bodies designated by the EU Member States for this purpose. It covers all product characteristics which are important for the fulfillment of the legal requirements in the member states, with the relevant levels of performance required being different in each member state.
A European technical approval / assessment can be granted for construction products for which harmonised specifications according to the Construction Products Directive do not (yet) exist or which deviate substantially from a harmonized standard.
Basis for the assessment of the performance are either Guidelines for European Technical Approvals (ETAGs) prepared by EOTA for the relevant product area, or criteria forassessment procedures that are agreed on with other EOTA bodies for issue of an approval of a specific request.
In the interest of the manufacturer the verifications presented to DIBt will be used as far as possible for the European procedure.
The European technical approval / assessment enables the manufacturer to place the CE marking on the construction product and thus access to the European market. With the CE marking the manufacturer confirms that he has carried out the prescribed verification method and that the conformity of the product is given with the approval.
FM ApprovalIn addition to general building authorities and European Technical Approval, selected EJOT products also feature a product certification by the American mutual insurance company FM Global.
The FM certification recognised both in Germany and internationally ensures compliance with the strictest quality and safety requirements.
32
EJOT SAPHIR® Self-tapping Fasteners
EJOT Self-tapping Screws Type A - JA3Austenitic stainless steel thread-forming fasteners. Available with or without bonded washer.
Application Roofing or cladding steel sheets
- Steel sections upto 2.0 mm in thickness
- Aluminum sections upto 3.0 mm in thickness
- Timber
Type A - JA3 3/8 AF
Application Timber or brackets
- Steel sections upto 2.0 mm in thickness
- Aluminum sections upto 3.0 mm in thickness
- Timber
Type A - JA3-S
EJOT Countersunk Self-tapping Screws Type A - JA3-S Austenitic stainless steel thread-forming fasteners. Unwashered.
T30
ø x Lmm
Standard Equivalent UnwasheredMin ECT Max
MinQty
6.5 x 35 1/4 x 1-3/8" 0.5 - 25. 100
6.5 x 95 1/4 x 3-3/4" 37.0 - 85.0 100
Order Example: JZ3-6.3 x 19 S16
ø x Lmm
Standard Equivalent
Washer OptionsMinQtyS16
Min ECT Max
6.5 x 19 1/4 x 3/4” 0.5 - 9.0 100
6.5 x 25 1/4 x 1” 0.5 - 15.0 100
6.5 x 32 1/4 x 1-1/4” 0.5 - 22.0 100
6.5 x 38 1/4 x 1-1/2” 0.5 - 28.0 100
6.5 x 50 1/4 x 2” 0.5 - 40.0 100
6.5 x 64 1/4 x 2-1/2” 0.5 - 54.0 100
6.5 x 75 1/4 x 3” 0.5 - 65.0 100
6.5 x 90 1/4 x 3-5/8” 12.0 - 80.0 100
6.5 x 100 1/4 x 4” 22.0 - 90.0 100
6.5 x 115 1/4 x 4-5/8” 37.0 - 105.0 100
6.5 x 125 1/4 x 5” 47.0 - 115.0 100
6.5 x 150 1/4 x 6” 72.0 - 140.0 100
6.5 x 175 1/4 x 7” 97.0 - 165.0 100
6.5 x 200 1/4 x 8” 122.0 - 190.0 100
6.5 x 230 1/4 x 9” 152.0 - 220.0 100
6.5 x 260 1/4 x 10-1/4” 182 - 250 100
6.5 x 290 1/4 x 11-1/2” 212 - 280 100
Order Example: JA3-6.5 x 19 S16
EJOT Self-tapping Screws Type B - JZ3Austenitic stainless steel thread-forming fasteners. Available with or without bonded washer.
Application Roofing or cladding steel sheets
- Steel sections greater than 2.0 mm in thickness.
- Aluminum section 3.0mm and greater in thickness
Type B - JZ3 3/8 AF
EJOT Countersunk Self-tapping Screws Type B - JZ3-SAustenitic stainless steel thread-forming fasteners. Unwashered.
Application Timber or brackets
- Steel sections greater than 2.0 mm in thickness
- Aluminum section 3.0mm and greater in thickness
Type B - JZ3-S T30
ø x Lmm
Standard Equivalent UnwasheredMin ECT Max
MinQty
6.3 x 19 #14 x 3/4” 2.0 - 13.0 100
6.3 x 25 #14 x 1” 2.0 - 19.0 100
6.3 x 35 #14 x 1-3/8” 2.0 - 29.0 100
6.3 x 64 #14 x 2-1/2” 2.0 - 59.0 100
6.3 x 90 #14 x 3-5/8” 30.0 - 84.0 100
Order Example: JZ3-S-6.3 x 19
ø x Lmm
Standard Equivalent
Washer OptionsMinQtyS16
Min ECT Max
6.3 x 19 #14 x 3/4” 2.0 - 13.0 100
6.3 x 25 #14 x 1” 2.0 - 19.0 100
6.3 x 32 #14 x 1-1/4” 2.0 - 26.0 100
6.3 x 38 #14 x 1-1/2” 2.0 - 32.0 100
6.3 x 50 #14 x 2” 2.0 - 44.0 100
6.3 x 64 #14 x 2-1/2” 2.0 - 58.0 100
6.3 x 80 #14 x 3” 18.0 - 74.0 100
6.3 x 90 #14 x 3-5/8” 28.0 - 84.0 100
6.3 x 100 #14 x 4” 38.0 - 94.0 100
6.3 x 115 #14 x 4-5/8” 53.0 - 109.0 100
6.3 x 125 #14 x 5” 63.0 - 119.0 100
6.3 x 150 #14 x 6” 88.0 - 144.0 100
6.3 x 175 #14 x 7” 113.0 - 169.0 100
6.3 x 200 #14 x 8” 138.0 - 194.0 100
6.3 x 220 #14 x 9” 160 - 200 100
6.3 x 270 #14 x 10-1/4” 210 - 250 100
Order Example: JZ3-6.3 x 19 S16
54
Call: 262-612-3550 Email infoUS@ejot.com www.ejot-usa.comEJOT SAPHIR® Self-tapping Fasteners
Application Profiled steel or aluminum sheets
- Timber
Mechanical performance is dependant on embedment and grade of timber
Type A - JA3-FR
EJOT Low Profile Self-tapping Screws Type A - JA3-FRAustenitic stainless steel thread-forming fasteners. Assembled with stainless steel / EPDM vulcanizied sealing washers.
Applications- For fixing meatal sections to timber or aluminum substructures < 2mm
Features- A2 stainless steel
- Stainless steel sealing washer
- Pan head and bonded washer mill finish or colored
- Pre-assembled sealing washer
DriveHexalobular drive T20
Type A - JA3-LT-4.9
EJOT Self-tapping Screws Type A - JA3-LT-4.9Austenitic stainless steel thread-forming fasteners. Available with or without bonded washer.
Standard Equivalent Order description Part number
Without sealing washer
#10 x 1” JA3-LT-4.9x25 3233200312
#10 x 1-1/2” JA3-LT-4.9x38 5000638300
Sealing washer mill finish E16, Ø 16mm
#10 x 1” S5/8 JA3-LT-4.9x25-E14 3233209312
#10 x 1-1/2” S5/8 JA3-LT-4.9x38-E14 3233409312
Note: Also available in RAL lacquering
T20
T25
ø x Lmm
Standard Equivalent
Washer OptionsMinQtyS12
Min EMB Max
4.9 x 38 #10 x 1-1/2" 100
4.9 x 64 #10 x 2-1/2" 100
Order Example: JA3-FR-4.9 x 38 S12
Applications- Fastening to steel substructures with limited accessibility.
Features- A2 stainless steel
- Stainless steel sealing washer
- Pre-assembled sealing washer
DriveHexalobular drive T30
Type AB - JB3-ZT-6.3
EJOT Self-tapping Screws Type AB - JB3-ZT-6.3Austenitic stainless steel thread-forming fasteners. Available with or without bonded washer.
Standard Equivalent Order description Part number
Without sealing washer
#14 x 1” JB3-ZT-6.3x25 3020100311
Sealing washer E14, Ø 14mm
#14 x 1” S5/8 JB3-ZT-6.3x25-E14 3120183311
T30
EJOT Self-tapping Screws Type AB - JB3-7.2Austenitic stainless steel thread-forming fasteners. Available with or without bonded washer.
Applications- For covering faulty drill holes
Features- A2 stainless steel
- Stainless steel sealing washer
- Pre-assembled sealing washer
DriveHexalobular AF 3/8”
Type AB - JB3-7.2
Standard Equivalent Order description Part number
Sealing washer E16, Ø 16mm
#17 x 3/4” S5/8 JB3-7.2x19-E16 3189111311
Sealing washer E22, Ø 22mm
#17 x 3/4” S7/8 JB3-7.2x19-E22 3189113311
#17 x 1” S7/8 JB3-7.2x25-E22 3189213311
3/8 AF
EJOT Special Screws - Self-tapping ScrewsFor fixing profiled steel sheet under high static stress to steel substructures.
Type B - JZ3-8.0 A/F13J3
Standard Equivalent Order description Part number
Sealing washer E22, Ø 22 mm
5/16 x 1” S7/8 JZ3-8x25-E22 3131253311
5/16 x 1-1/4” S7/8 JZ3-8x32-E22 3131353311
5/16 x 1-1/2” S7/8 JZ3-8x38-E22 3131453311
5/16 x 2-1/2” S7/8 JZ3-8x64-E22 3131853311
5/16 x 4” S7/8 JZ3-8x100-E22 3132253311
5/16 x 5” S7/8 JZ3-8x125-E22 3132453311
5/16 x 6” S7/8 JZ3-8x150-E22 3131553311
5/16 x 8” S7/8 JZ3-8x200-E22 3132853311
Application range- Fixing of profiled steel sheet to steel substructures
under high static stress
- Fixing of steel / aluminum profiled sheets to aluminum substructures
Features- A2 stainless steel
- Stainless steel sealing washer
- Pre-assembled sealing washer
ApprovalETA-10/0200
DriveHexagon A/F13
76
Call: 262-612-3550 Email infoUS@ejot.com www.ejot-usa.comEJOT SAPHIR® Self-tapping Fasteners
EJOT Corremaks® Type A - JA1A5 stainless steel 1.4529 thread-forming fasteners.
Application Roofing and cladding steel or aluminum sheets to steel sections up to 2.0 mm thickness
- Timber
- in highly corrosive environments. Contact EJOT Technical for suitable environments.
Type A - JA1 3/8 AF
ø x Lmm
Standard Equivalent
Washer OptionsMinQtyS16
Min ECT Max
6.5 x 22 1/4 x 7/8” 0.5 - 12.0 100
6.5 x 38 1/4 x 1-1/2” 0.5 - 28.0 100
6.5 x 64 1/4 x 2-1/2” 0.5 - 54.0 100
6.5 x 115 1/4 x 4-1/2” 40.0 - 102.0 100
6.5 x 145 1/4 x 5-3/4” 70 - 133 100
Order Example: JA1-6.5 x 38 S16
EJOT Corremaks® Type B - JZ1Fasteners for applications with high corrosion risk.
Application Roofing and cladding steel or aluminum sheets to steel sections greater than 2.0 mm thickness in highly corrosive environments.
Contact EJOT Technical for suitable environments.
Type B - JZ1 3/8 AF
ø x Lmm
Standard Equivalent
Washer OptionsMinQtyS16
Min ECT Max
6.3 x 22 #14 x 7/8” 0 - 6.0 100
6.3 x 54 #14 x 2” 0 - 39 100
6.3 x 70 #14 x 2-3/4” 3 - 55 100
6.3 x 125 #14 x 5” 58 - 110 100
Order Example: JZ1-6.3 x 22 S19
For use in environments with high exposure to chloride, sulphur dioxide and concentrated pollutants.EJOT Corremaks® typical applications include swimming pools, tunnel construction, salt storage, underground car parks, composting plants, electro plating facilities, coastal areas and chemical plants.
EJOT Cronimaks®
For fixing into stainless steel sub structures and high-grade, high-strength structural steel.
Cronimaks
ApplicationsFastening profiles steel sheet and sandwich panel to hi tensile steel or stainless steel sub-structure
(up to Rm = 700 N/mm squared)..
Features- A2 stainless steel screw approved for high-
strength steel substructures
- Pre-assembled stainless steel sealing washer
- Can be used for Stainless Steel substructure
ApprovalETA-10/0200
ETA-13/0177
DriveHexagon A/F13
Standard Equivalent
Effective clamping
thickness mm
Packing unit How to order
without sealing washer
#14 x 7/8” 9 500 JZ7-6,3x22
#14 x 2-1/2” 52 250 JZ7-6,3x65
#14 x 3-1/4” 72 200 JZ7-6,3x85
#14 x 4” 92 200 JZ7-6,3x105
#14 x 5” 112 200 JZ7-6,3x125
#14 x 5-3/4” 132 200 JZ7-6,3x145
#14 x 6-5/8” 152 200 JZ7-6,3x165
#14 x 7-3/8” 172 200 JZ7-6,3x185
Special lengths on request!
Can be combined with all EJOT A2 stainless steel sealing washers
A/F13
ø x Lmm
MinQty
6.0 x 9.5 100
6.0 x 11.5 100
6.0 x 14.5 100
Order Example: PTS 60 x 9.5
Application Concealed fixing of brackets to high pressure laminate facade panels
PTS T30
EJOT Self-Tapping Screws PTSA4 stainless steel thread forming fasteners.
98
Call: 262-612-3550 Email infoUS@ejot.com www.ejot-usa.comEJOT SAPHIR® Self-tapping Fasteners
EJOT Universal Scaffolding Anchor Forged zinc plated carbon steel eyebolt.
Standard Equivalent Sealing Washer MinQty
#14 x 1” E16 50
#14 x 2-1/2” E16 50
#14 x 4” E106 50
Order Example: JZ3 - GT - 6.3 x 25 E16
Application Steel Structure over 2mm
Aluminmium Structure 3 mm and over
Type B - JZ3 - GT T30
T30
Anchor Thread
mm
Standard Equivalent
MinQty
6.5 x 32 M10 1/4 x 1-1/4” 50
6.5 x 64 M10 1/4 x 2-1/2” 50
Order Example: JA3 - GT - 6.5 x 32 E16
Application Steel Structure under 2mm
- Timber
Type A - JA3 - GT
Drill hole diameter for profiled steel sheet structures
How to determine the drill hole diameter
Thickness of building part iHot - dip galvanized steel - sheet
(Rm≥ 360N/mm2)
Thickness of building part iiHot - dip galvanized steel - sheet / steel - profiles / rolled steel
ST 37 (Rm≥ 360N/mm2 ≤ 440N/mm2)
mm 0.63 0.75 0.88 1.00 1.13 1.25 1.50 2x 0.75
2x 0.88
2x 1.00
2.0-4.9
5.0-6.9 ≥7.0 1.5-
5.96.0 - 7.9
8.0 - 9.9 mm
0.63 3.5 4.0 4.5 4.5 4.5 4.5 4.5 4.5 4.5 5.0 5.3 5.5 5.7 6.8 7.0 7.2 Drill Hole
0.75 3.5* 4.0 4.5 4.5 4.5 4.5 4.5 4.5 4.5 5.0 5.3 5.5 5.7 6.8 7.0 7.2
0.88 3.5* 4.0* 4.5 4.5 4.5 4.5 4.5 4.5 4.5 5.0 5.3 5.5 5.7 6.8 7.0 7.2
1.00 3.5* 4.0* 3.5* 4.5 4.5 4.5 4.5 4.5 4.5* 5.0 5.3 5.5 5.7 6.8 7.0 7.2 Diameter
1.13 3.5* 4.0* 3.5* 4.5* 4.5 4.5 4.5 4.5 4.5* 5.0* 5.3 5.5 5.7 6.8 7.0 7.2
1.25 3.5* 4.0* 3.5* 4.5* 4.5* 4.5 4.5 4.5 4.5* 5.0* 5.3 5.5 5.7 6.8 7.0 7.2
1.50 3.5* 4.0* 3.5* 4.5* 4.5* 4.5* 5.0* 4.5 4.5* 5.0* 5.3 5.5 5.7 6.8 7.0 7.2
2.00 - - - 4.5* 4.5* 4.5* 5.0* - - 5.0* 5.3 5.5 5.7 - 7.0 7.2 mm
EJOT fastener type JAØ 6.5 JZØ 6.3 JZØ 8.0
Drill hole diameter for profiled aluminum sheet structures
Thickness of building part i* Through-hole > screw diameter in building part i necessary.
NB: When fixing profiled aluminum sheet (Building part i) to steel substructure (Building part ii) please use the drill hole table for profiled steel sheet.
Thickness of building part iAluminum sheet (Rm≥ 280N/mm2)
Thickness of building part iiAluminum sheet, aluminum profiles
F22 - F25 (Rm≥ 220N/mm2 ≤ 290N/mm2)
mm -0.9 1.0 - 1.4 1.5 - 2.9 3.0 - 4.9 5.0 mm
0.4 4.0 4.0 4.5 5.0 5.3 Drill Hole
0.5 4.0 4.0 4.5 5.0 5.3
0.6 4.0 4.0 4.5 5.0 5.3
0.7 4.0 4.0 4.5 5.0 5.3 Diameter
0.8 4.0 4.0 4.5 5.0 5.3
1.0 4.0 4.0 4.5 5.0 5.3
1.2 4.0* 4.0 4.5 5.0 5.3
1.5 4.0* 4.0 4.5 5.0 5.3 mm
EJOT fastener type JAØ 6.5 JZØ 6.3
Thickness of building part i Aluminum sheet (Rm≥ 280N/mm2)
Thickness of building part iiAluminum sheet, aluminum profiles
F22 - F25 (Rm≥ 220N/mm2 ≤ 290N/mm2)
mm -0.9 1.0 - 1.4 1.5 - 2.9 3.0 - 4.9 5.0 mm
0.4 4.0 4.0 4.5 5.0 5.3 Drill Hole
0.5 4.0 4.0 4.5 5.0 5.3
0.6 4.0 4.0 4.5 5.0 5.3
0.7 4.0 4.0 4.5 5.0 5.3 Diameter
0.8 4.0 4.0 4.5 5.0 5.3
1.0 4.0 4.0 4.5 5.0 5.3
1.2 4.0 4.0 4.5 5.0 5.3
1.5 4.0 4.0 4.5 4.5 5.3 mm
EJOT fastener type
Example
Thickness of building partI= 0.7 mm aluminum sheet
Thickness of building partIl= 3.0 mm aluminum profile
Screw type = EJOT JZ3 6.3 xL
Drill hole = 5.0 mm diameter
JAØ 6.5 JZØ 6.3
1110
EJOT The Quality Connection08 - 18
USA - Midwest
EJOT Fastening Systems L.P.
Construction Fastener Division
9900 58th Place, Suite 100
Kenosha, Wisconsin 53144
Tel: 262-612-3550
Email: infoUS@ejot.com
www.ejot-usa.com
EJOT Fastening Systems L.P.
Industrial Fastener Division
Applitec Lab and Testing Facility
48679 Alpha Dr, Suite 110
Wixom, MI 48393
Tel: 248-773-7453
Email: infoUS@ejot.com
www.ejot-usa.com
USA - Southwest
EJOT Fastening Systems L.P.
Construction Fastener Division
PO Box 1954
Scottsdale, AZ 85252
Tel: 262-358-1808
Email: infoUS@ejot.com
www.ejot-usa.com
Canada
EJOT Construction Fastening
Systems Inc
Construction Division
50 Fleming Drive, Unit #4
Cambridge, ON N1T 2B1
Tel: 226-499-9977
Email: infoca@ejot.com
www.ejot.ca
Mexico
EJOT ATF Fasteners de México
y Compañía, S. en C.
División Fijaciones
para la Construcción
Av. Del Siglo No. 180 ,
Parque Industrial Millennium
San Luis Potosí, S.L.P.,
C.P. 78395 México
Tel: +52 444 8 70 82 30
Email: construccion@ejot-atf.com
www.ejot-atf.com
@EJOT_USAwww.ejot-usa.com ejotfasteningsystems
With over 30 years of experience, development and technical expertise, EJOT understands the requirements for a fastener and its application on building envelopes. Our knowledge provides the base and source of our products and EJOT’s solutions offer our customers real benefits.
The quality of our products surpasses planning laws and legal requirements. Our aim is to ensure quick and easy assembly.
EJOT USA’s and supply base is complemented with EJOT’s global sales and service network as well as project support teams ready to help our customers at any time, nationally and internationally.
top related