300 oc aluminium top hotplates -...
Post on 07-Sep-2019
2 Views
Preview:
TRANSCRIPT
135
HHOTPLATES300OC Aluminium Top
HOP-2525250x250mm hotplate
HOP-1818175x175mm hotplate
HOP-1212115x115mm hotplate
HOP Serie Aluminium Top Hotplates Features: Chemical resistant top plate, easy to clean. Excellent heat conduction distributes the heat evenly and uniformity over the entire heating surface. Sensitive “stepless” temperature control is maintained by means of a hydraulic thermostat with minimum overshoot and undershoot Making possible the processing of delicate materials at low critical temperatures. Pilot lamp indicates when heat is on. Special radiation shields keep apparatus relatively cool during continuous operation. Supplied with a 3-wire line cord and sturdy screw type support device at the rear of the base to hold standard rod.
Application: Distillations, extractions and digestions Heat aqueous reagents Semiconductor baking Acid/Base digestions - trace metal analysis. etc. Sample drying General reagent heating Heating TLC plates Evaporations Warning/curing applications - pastes, adhesives, and solder Ideal for general lab heating Liquid evaporations
Model Temperature range Top plate Dimensions Watt Weight
HOP-1212 40-300°C 115x115mm W140xH110xD220mm 450W 1.2kg
HOP-1818 40-300°C 175x175mm W200xH150xD260mm 750W 2.3kg
HOP-2525 40-300°C 250x250mm W250xH150xD260mm 1500W 3.3kg
HOP-2550 40-300°C 500x250mm W500xH150xD250mm 3000W 6.5kg
support device at the rear of the base to hold standard rod.
Hop-1818Back Panel
!"#$%&'()*+"!,'*+'*'-)*.$!*/0)'1%"2)3
This modern range of aluminium hotplates provides
superior temperature uniformity and stability is
available in 4 sizes.
HOP-1212
Compact and lightweight hotplate, great to use in
limited space.
Making possible the processing of delicate materials at
low critical temperatures.
45)2"62*+"$!.7
300OC300OC
HOP-2550
136
HOTPLATES Digital & Programmable
HOP-D Serie Digital & Programmable Hotplates, Aluminium TopApplication: Distillations, extractions and digestions Heat aqueous reagents Semiconductor baking Acid/Base digestions - trace metal analysis. etc. Sample drying General reagent heating Heating TLC plates Evaporations !"#$%$&'()#%$&*"++,%("-%.$/0+"/-1/2*"341/%51/2*6*/.,31# Viscosity studies Reaction optimization Solubility studies Safety thermostat
Features:
Temperature can be displayed in °C or °F.
Digital timer and ramp to temperature function.
Digital set-point and read-out of actual temperature.
PID microprocessor Eurotherm 2132 controller provides
precise temperature regulation all over the temp. range,
include the low temp close to the ambient.
Temperature may be controlled either at the plate surface by
internal sensor,or at the sample by a Thermocouple
Immersion probe.
Safety: in the event of broken sensor,power to the heater is
shut-down.
Temperature range :above ambient to 300°C.
Chemical resistant top plate, easy to clean.
Excellent heat conduction distributes the heat evenly and
uniformity over the entire heating surface.
Pilot lamp indicates when heat is on.
Special radiation shields keep apparatus relatively cool
during continuous operation.
HOP-2525D250x250mm Hotplate
HOP-1818D175x175mm Hotplate
HOP-1212D115x115mm Hotplate
Hop-1818DBack Panel
HOP-2550DLarge surface for large loads, 500x250mm Hotplate
Support device at the rear of the base External sensor input Safety thermostat External/internal sensor switch.
Model Temp. range Top plate Temp. stability Dimensions Watt Weight
HOP-1212D 40-300°C 115x115mm ±1° W140xH110xD220mm 450W 1.3kg
HOP-1818D 40-300°C 175x175mm ±1° W200xH150xD260mm 750W 2.4kg
HOP-2525D 40-300°C 250x250mm ±1° W250xH150xD260mm 1500W 3.4kg
HOP-2550D 40-300°C 500x250mm ±1° W500xH150xD250mm 3000W 6.6kg
3216CP Optional Temperature programmer
45)2"62*+"$!.7
External temp. sensor 200mm length, 3.2mm diameter. Optional: Communicator 3216 Com. Optional: Optional Temperature programmer.
300OC300OC
H
137
HOTPLATESLarge
Hotplate With Wattage Power Control Or Digital PID Control
HOP-5843
HOP-6116-1
CERAN® Hot Plate With Thermostatic Temp. Control 50-500°C (Optional Digital Control)
CERAN® an unusual glass ceramic material which is highly
resistant to breakage and temperature changes, free from
distortion, permeable to ultra-violet light and highly acid-
resistant. Construction: The low mass CERAN® plate is
electrically heated over its full surface and is bedded into a
stainless steel frame which is mounted on an internally
insulated stainless steel housing. The temperature control
system consists of an electronic regulator, activated by a
NiCr-Ni temperature sensor (adjustable 50 ... 500°C) installed
in a aluminium pressure-cast housing. Warm-up time, e. 9".
500°C in 8 minutes. Four feet, which CERA-4328
Series A - with built-in control housing, Series SR - with separate control housing
WeightVoltWattCERAN® mmWxHxD(mm)Types
5.0kg230V AC1500430x140440x100x300CERA-4314
5.5kg230V AC2000280x280290x100x410CERA-2828
6.5kg230V AC3000280x430290x100x560CERA-4328
9.0kg3x400V, N+PE4400430x430440x100x560CERA-4343
11.5kg3x400V, N+PE5700580x430590x100x560CERA-5843
can be individually adjusted to an approx. height of 8 mm to ensure horizontal stability.
78+1*9:*4"/*9*/)++.#-%$&*#.3*4.,31#/*;3%/-"$(1*<==*>>?*@$*78+1/*AB*6*CD2*-41*1,1(-#%(",*(.$$1(-%.$*
E1-F11$*-41*(.$-#.,*4.)/%$&*6*-41*4.-*+,"-1*%/*+#.-1(-13*E8*"*G1H%E,1*>1-",*4./1I
370OC370OC
500OC500OC
Electrical hot plates with variable wattage control.
Robust construction for continuous performance.
Aluminium alloy hotplate. Because of the asymmetrical, long-
term heating system (hotplate corners and edges are subjected
to more heat) an even temperature is guaranteed over the
entire heating surface. Asbest-free insulation. The housing
is constructed from high-grade, stainless steel No. 1.4301,
whereby the central section has been additionally sprayed in
orange. Four adjustable feet ensure extra stability. Connecting
cable approx. 1,7 m. long, 230 Volt/ 3200 Watt with plug.
Option: Digital temp. controller.
Type Temp. Range Top Plate Dimen.(mm) DimensionsW (mm) Watt Volt Weight
HOP-3030 max. 370°C 300x300 W300xH312xD 300 1800
230
10kg
HOP-3535 max. 370°C 350x350 W350xH358xD350 2200 12kg
HOP-4429 max. 370°C 440x290 W290xH308xD440 2400 13kg
HOP-5035 max. 370°C 500x350 W350x H364xD350 2850 18kg
HOP-5843 max. 370°C 580x470 W430xH442xD580 4000 25kg
HOP-6116-1 30~110°C610x160 W610xH170xD160
1000220 11kg
HOP-6116-3 50~300°C 2000
H
138
H HOTPLATES
Electrical sandbaths with variable wattage control. Option:
Digital temp. controller. Robust construction for
continuous performance. Aluminium alloy hotplate. Because of
the asymmetrical, long-term heating system (hotplate corners
and edges are subjected to more heat) an even temperature
is guaranteed over the entire heating surface. The sandbaths
consist of an aluminium alloy hotplate with a screwed-on,
sealed stainless steel frame with a usable height of 50 mm.
The sand lays direct of the hotplate.
The housing is constructed from
high-grade, stainless steel No.1.4301,
whereby the central section has been
additionally sprayed in orange. 4 adjustable feet ensure extra
stability. Connecting cable approx. 1,7 m long, 230 Volt/3200
Watt with plug.
Incinerator/Sand
SOD-3636
Sand Baths Up To 370oC
Type Temp. Hotplate WxHxD(mm) Watt Volt Weight
SOD-3636
Max.
370°C
360x360 360x220x360 2200 230 13 kg
SOD-5136 510x360 360x220x510 2850 230 21 kg
SOD-5843 580x430 440x220x590 4000 230 27
Ashing & Burn Off Hotplate Furnace Up To 950oC
J.#*/%$&,1*"$3*/1#%1/*%$(%$1#"-%.$*.K*/.,%3*6*,%L)%3*/)E/-"$(1/I*
The operating temperature of approx. 950°C can be reached
within the space of a few minutes. The upper platform has 8
recesses with a diameter of 35 mm which can accommodate
porcelain crucibles of up to 50 mm diameter for drying,
+#1041"-%$&*6*K)>%$&0.KKI*741*)$%$4%E%-13*1H+./)#1*-.*.H8&1$*
speeds up the incineration process. The inclined position of
the crucibles in the lower incinerating bed (which has a length
of 400 mm) allows excellent observation and access to the
contents during operation. Modern design, easy to operate,
reliable, space-saving and of very good value.
HOF-604A/D
Model HOF-604A analog HOF-604D digital
Voltage 230-240V, 50/60Hz
Performance 2500 Watt
Width & Depth 450mm x 180mm
Height 310mm
Maximum crucible diameter 50mm
Maximum crucible height 50mm
Weight 8kg 7.8kg
Model HOF-604A: The upper part and the main housing are
made of highgrade stainless steel, the housing comes with an
.#"$&1*M$%/4*;B:N*O==O?I*741#1*%/*1,1(-#%(",*
F"--"&1*(.$-#.,I*741*"++,%"$(1*%/*M--13*F%-4*"*/"K1-8*/F%-(4*F4%(4*()-/*.KK*-41*>"%$/*/)++,8*-.*-41*41"-1#*
%>>13%"-1,8*-41*/1#5%(1*G"+*%/*.+1$13I*!41$*-41*G"+*%/*(,./132*+.F1#*%/*#1/-.#13*-.*-41*1,1>1$-I*
741*#1"380-.0)/1*"++"#"-)/*%/*31,%51#13*(.>+,1-1*F%-4*"*<IP*>*("E,1*6*A(4)Q.*+,)&I
Model HOF-604D: As SVR/E, but with an additional Eurotherm PID temperature controller up to 999°C, this is controlled by a
built-in,K type thermo couple. The pre-selected temperature is shown on the digital display with a constant ACTUAL temp.
950OC950OC
370OC370OC
139
HHOTPLATE/STIRRERSCeramic Top
HSCD-4Digital hotplate stirrer
Model Temp. range Top-plate Temp. control Magnetic stirrer
HPC-4 up to 500 °C 175x175mm Analog No
HPCD-4 up to 500 °C 175x175mm Digital No
HSC-4 up to 500 °C 175x175mm Analog 100~1200rpm
HSCD-4 up to 500 °C 175x175mm Digital 100~1200rpm
Features: High impact strength Acid and alkali resistance Heats rapidly up to 540°C in 8 minutes Stepless heat control Ceramic top remains perfectly flat to ensure maximum heat transfer. Reflective white top makes sample viewing easy. Not recommended for use with metal vessels.
Applications: Models are excellent for microscale chemistry R1$1#",*,"E*41"-%$&6/-%##%$& Sample drying Media preparation General microbiological applications
HPC-4 & HSC-4, Analog Models
HPCD-4 & HSCD-4, Digital ModelsMeasures Temperature on Plate or in Sample
Features: Microprocessor closed-loop control Digital display of all parameters for easy operation. Temperature can be displayed in °C or °F PID microprocessor Eurotherm 2132 controller provides precise temperature regulation all over the temp. range, include the low temp close to the ambient. Temperature may be controlled either at the plate surface by internal sensor,or at the sample by a Thermocouple Immersion probe. B">+*#"-1*-.*/1-+.%$-*6*-%>1#
Description: Solid state feedback control monitors and adapts to sudden changes in ambient or sample temperature, preventing boil-overs, ruined samples, and lost time. Digital display for quick and easy observation. S#15%.)/*/1-*+.%$-*%/*/-.#13*%$*>1>.#8*6*F%,,*"++1"#*.$*-41* display when the unit is switched on.
3216CPOptional programmer
3216 comOptional communication
HSC-4Analog Hotplate stirrer
HPC-4Analog Hotplate
support device at the rear of the base to hold standard rod
Back Panel - Analog Models
Back Panel - Digital ModelsSupport device at the rear of the base 8 External sensor input 8 Safety thermostat 8 External/internal sensor switch
500OC500OC
140
H HOTPLATE STIRRERS Aluminium Top
HS-Serie Hotplate Mgnetic Stirrers1$9)%#:0'4+"%%"!,'*!;' !"#$%&'()*+"!,3Quiet direct drive motor/magnet system provides speed from 100 to 1200 RPM.
Features:
Chemical resistant top plate, easy to clean.
Excellent heat conduction distributes the heat evenly and uniformity over the entire heating surface.
Sensitive “stepless” temperature control is maintained by means of a hydraulic thermostat with minimum overshoot
and undershoot Making possible the processing of delicate materials at low critical temperatures.
Pilot lamp indicates when heat is on.
Special radiation shields keep apparatus relatively cool during continuous operation.
Supplied with a 3-wire line cord and sturdy screw type support device at the rear of the base to hold standard rod.
Uniform, stable heating
Designed for continuous use, to handle fluids of varying viscosities in up to 25liter capacity
Available in 4 models to accommodate most laboratory applications requiring mixing and temperature control.
Gentle or vigorous stirring
HS-1 T.>+"(-*6*,%&4-*F1%&4-2*"-*-.*)/1*%$*,%>%-13*/+"(1*****GHS-5 For large capacity up to 25 liter, stir viscous solution
Applications:
Warming/mixing applications - gels, pastes, and adhesives
Standard reagent mixing and heating
Preparing culture media
Evaporation and distillation procedures
Titrations requiring heating and stirring of solution
Gentle heating
Microscale chemistry
R1$1#",*,"E*41"-%$&*6*/-%##%$&
Sample drying
Media preparation
General microbiological applications
Model Temp. range Speed range Capacity max. Top plate Dimensions Watt Weight
HS-1 40-300°C 100-1200rpm 8 Liter 115x115mm W140xH110xD220mm 450W 1.9kg
HS-4 40-300°C 100-1200rpm 10 Liter 175x175mm W200xH150xD260mm 750W 3kg
HS-5 40-300°C 100-1400rpm 20 Liter 175x175mm W200xH150xD260mm 1500W 3.4kg
GHS-5 40-300°C 100-1400rpm 25 Liter 250x250mm W250xH150xD260mm 3000W 4.4kg
support device at the rear of the base to hold standard rod
Back panel
GHS-5 HS-4 HS-1
45)2"62*+"$!.7
300OC300OC
141
HHOTPLATE STIRRERSDigital & Programmable
Application:
Warming/mixing applications -
gels, pastes, and adhesives.
Standard reagent mixing and
heating.
Preparing culture media.
Evaporation and distillation
procedures.
7%-#"-%.$/*#1L)%#%$&*41"-%$&*6*
stirring of solution.
Gentle heating.
Microscale chemistry.
*R1$1#",*,"E*41"-%$&*6*/-%##%$&I*
Sample drying.
Media preparation.
*General microbiological applications.
Features:
Temperature can be displayed in °C or °F.
Digital timer and ramp to temperature function.
Digital set-point and read-out of actual temperature.
PID microprocessor Eurotherm 2132 controller provides
precise temperature regulation all over the temp. range, in
clude the low temp close to the ambient.
Temperature may be controlled either at the plate surface by
internal sensor,or at the sample by a Thermocouple
Immersion probe.
Safety: in the event of broken sensor,power to the heater is
shut-down.
Temperature range :above ambient to 300°C.
Chemical resistant top plate, easy to clean.
Excellent heat conduction distributes the heat evenly and
uniformity over the entire heating surface.
Pilot lamp indicates when heat is on.
Special radiation shields keep apparatus relatively cool during
continuous operation.
Designed for continuous use, to handle fluids of varying
viscosities in up to 25liter capacity.
Available in 4 models to accommodate most laboratory
applications requiring mixing and temperature control.
Gentle or vigorous stirring.
Back panel
HSD-Serie Digital Magnetic Stirrers
Support device at the rear of the base
External sensor input
Safety thermostat
External/internal sensor switch
External temp. sensor 200mm length, 3.2mm
diameter
ModelTemp.
range
Speed
range
Capacity
max.Top plate Dimensions Watt Weight
HSD-4 40-300°C 100-1200rpm 10 Liter 175x175mm W200xH150xD260mm 750W 3kg
HSD-5 40-300°C 100-1400rpm 20 Liter 175x175mm W250xH150xD260mm 750W 3.1kg
GHSD-5 40-300°C 100-1400rpm 25 Liter 250x250mm W500xH150xD250mm 1500W 3.5kg
DHSD-5 40-300°C 100-1400rpm 25 Liter250x250mm
DualW500xH150xD250mm 3000W 4.5kg
3216CPOptional programmer
3216 comOptional communication
GHSD-5 HSD-4
45)2"62*+"$!.7
300OC300OC
142
H HOTPLATE/STIRRERS Multi Position
Multi-Hotplate Stirrers, 4 Or 6 Places Aluminium Top Plate **Independent Heating & Stirring Control **up to 300OC/1600rpm
Model: MUHS-6, 6 Positions Multi position hotplate stirrer with six positions. Six individually controlled stirring and heating positions. Each position can be used to stir only, heat only or heat and stir at the same time. Ideal for a narrow bench-top or for applications needing support rack system. The top plates are chemical resistant and heat quickly. A-%##1#/*"#1*1L)%++13*F%-4*/-#.$&*>"&$1-/*6*4%&4*-.#L)1*** motors.
Temperature range: Up to 300oC
Speed control: Up to 1600RPMDimensions: Top plate 11.5x11.5cm, Overall W81xH14.5xD22cm (D includes support rod clamp)Power: 230V (or 115V), 50/60Hz, 3000W-6x500WNet weight: 12Kg
Model: MUHS-4, 4 PositionsMulti-position hotplate stirrer with four positions (in one row), Same as model MUHS-6, except dimensions which are: 60.5x14.5x22cm, weight 8 kg, power 2000 watt-4x500 watt.
MUHS-6
MUHS-2x2
MUHS-3x2
Model: MUHS-2x2 Multi position hotplate stirrer with four positions (in 2 rows 2+2). 4 individually stirring and heating positions. 4 chemical resistant top-plates, 11.5x11.5cm. The top plates are chemical resistant and heat quickly. Stirrers are equipped with strong magnets and high torque motors.
Temperature range: Up to 300oC
Speed control: Up to 1600RPMDimensions: Top plate 11.5x11.5cm Overall W30xH14.5xD31cm (D includes support rod clamp) Placed in two rows 2+2Power: 230V (or 115V), 50/60Hz, 2000W-4x500WNet weight: 8Kg
Model: MUHS-3x2
Multi-position hotplate stirrer with six positions (in 2 rows 3+3)
Same as model MUHS-2x2, except dimensions which are:
45x14.5x31cm, weight 8 kg, power 2000 watt-4x500 watt.
6 individually stirring and heating positions.
6 chemical resistant top-plates, 11.5x11.5cm.
The top plates are chemical resistant and heat quickly.
Stirrers are equipped with strong magnets and high torque
motors.
Options:
CH(1,,1$-*K.#*U),-%0)/1*6*"*!%31*V"#%.)/*A">+,1*71/-%$&* *A8/-1>%W13*9*6*X*Y.-+,"-10A-%##1#* *@$31+1$31$-*Y1"-%$&*6*Stirring Control* *Maximum Temperature of 300OC* *:,)>%$%)>*-.+/*41"-*)+*L)%(Q,8*6*)$%K.>%-8I*R#1"-*K.#*,.F*-1>+1#"-)#1*applications* *Z$%-/*"#1*E)%,-*K#.>*3)#"E,1*("/-*",)>%$%)>*("/1/*6*+"%$-13*F%-4*(41>%(",,8*#1/%/-"$-*+"%$-I
Model MUHP-3x2, Similar to the above described
model: MUHS-3x2, but without stirrers
Options: Model MUHP-2x2, Similar to the above described model: MUHS-2x2, but without stirrers
Model: MUHP-4Similar to the above described model: MUHS-4, but without stirrers.
Model: MUHP-6Multi position hotplate with six positions.
Options:
300OC300OC
top related