151111 project progress update (matthieu van der heijden)
Post on 15-Apr-2017
311 Views
Preview:
TRANSCRIPT
SUSTAINABILITY IMPACT OF NEW TECHNOLOGY ON AFTER-SALES SERVICE SUPPLY CHAINS (SINTAS)NOVEMBER 11, 2015
AGENDA
2
1. INTRODUCTION(NEW) REPRESENTATIVES, STUDENTS
3
Matthieu van der Heijden Mike LoerakkerTiedo Tinga Marc de SmitNils Knofius Carla AndelaLaura Cordova Valentijn van ZeijderveldGino Balistreri Jeroen van der WelRob Basten Jasper de GraafBram Westerweel Arno BrinkmanJohnny Peeters Peter VinkKaveh Alizadeh Christian NorbergVincent van Vliet
1. Recruitment of researchers (all positions filled) WP1: Laura Córdova González (November, 2015) WP2: Bram Westerweel (February, 2015) WP3: Nils Knofius (November, 2014)
2. BETA educational plans in execution (Nils, Bram)3. Working paper presented at the ISIR Summer School
on the selection framework (August 2015, Hamburg; Nils Knofius)
4. First models under construction (see presentations Bram and Nils)
2. ACTIVITIES IN THE PAST HALF YEARPHD RESEARCH
4
1. Quick scans at Army, Fokker Services, Thales: Completed2. Quick scan at Airforce / NLR (student Windesheim,
supervised by Carla Andela) + 2 BSc students UT: Ongoing3. MSc project on 3D printing for after sales service supply
chains by Rodger Abbink (TU/e): Completed4. Follow-up MSc project defined at Fokker services on
obsolescence problems in the end-of-life phase (Jorn Jansman, TU/e): Starting in February 2016
5. Follow-up MSc project on part consolidation at Thales: in preparation
6. Follow-up at the Army is in discussion7. Related project at Additive Industries (TU/e): To be started
2. ACTIVITIES IN THE PAST HALF YEARSTUDENT ACTIVITIES
5
1. Presentation of selection framework at ISIR Summer school, Hamburg, August 2015 (Knofius)
2. Presentation at SLF Summit, November 5, 2015, Rotterdam (vd Heijden)
Interest in “Quick scan” by Damen Shipyard, IBM, Ricoh Visit Norwegian Defence Research Establishment: Today
3. Presentation (and tour) on the influence of AM on SCM by Daan Kersten, part of a meeting of the TU/e (September 16, 2015)
2. ACTIVITIES IN THE PAST HALF YEAREXTERNAL MEETINGS / PRESENTATIONS
6
1. NATO specialist meeting on Additive Manufacturing for Military Hardware: Talinn, april 2016; Andela, Tinga, Knofius
2. Presentation at Odette conference on automotive logistics and IT (nov. 30 – dec. 1, 2015, Munich; Knofius)
3. Poster presentation at BETA/TRAIL congress (Nov. 17, 2015)
4. Presentation at Maintenance Research Day, Feb. 2016
2. ACTIVITIES IN THE PAST HALF YEAREXTERNAL MEETINGS / PRESENTATIONS, PLANNED
7
1. Progress report M1-M6 2015: Complete and submitted Time registration:
Equipment and materials Supervision/contact students Attending/organizing meetings Note: wage costs with a max. hourly rate € 100
2. ACTIVITIES IN THE PAST HALF YEAROTHER
8
NLR € 40.000
Fokker Services € 25.000
Thales Nederland € 25.000
Ministry of Defense € 25.000
Additive Industries € 10.000
3. PROGRESS WP-1-2-3
9
WP-1
10
Research questions:1a. What parts can be produced with 3D printing ?
shape, size, complexity, material: both metal and plastics (?)1b. What quality can be achieved ?
shape tolerance, mechanical properties2a. What is the reliability and durability of typical printed parts ?
fatigue, wear, corrosion2b. How sensitive are the printed part properties for
environmental conditions, operator skills ?3. How can the effect of AM technology on the selection of an optimal maintenance policy be incorporated and how can its impact be quantified?
STATUS
11
PhD student starts Nov 15 – Laura Cordova Gonzalez
Student projects Paula Guedes (internship UT) – parts repair using AM
Niels Vluttert / Stefan Smit (BSc UT) – effect of moisture / layer thickness
PLANNED ACTIVITIES
12
Laura Cordova
Research question 1 Literature study + discussion NLR / Additive Industries
What parts can be produced ? What quality can be achieved ?
Discuss with other companies What properties are important ? Relate to quick scans
IDENTIFY WHITE SPOTS
13
Research question 2 From RQ1 + discussion with companies
What are important properties for reliability / durability ?
fatigue, wear, corrosion
Literature study + discussion NLR / Additive Industries What is the achievable level of reliability / durability of typical printed parts ? How are these properties affected by process parameters ? How sensitive are the printed part properties for
environmental conditions, operator skills ?
provides insight in what is known / unknown !
EXPERIMENTAL WORK
14
Set-up experiments to find unknown relations Define part shape / complexity / material / settings with NLR / AI Define test matrix
Which properties to test / which variations to consider ?
Partly covered by BSc projects Vluttert / Smit1. Effect of moisture in powder on mechanical properties of parts
2. Effect of layer thickness on mechanical properties of parts
APPLICATION TO MAINTENANCE
15
Set-up models to provide decision support How does maintenance decision change if AM is used
Shorter life time other replacement intervals ?
Is repair possible ?
Use printed parts only to cover lead time of original parts ?
Close link with WP2 / 3
Application in number of case studies / demonstrators of companies
EFFECT OF MOISTURENIELS VLUTTERT
16
How does moisture in powder affect the quality / properties ? Related to storage conditions of the powder
Research proposal has been finished limited literature !
Topics to be covered1. How can the amount of moisture in the metal powder be determined?
2. How much moisture can be absorbed by the metal powder?
3. Is the amount of time the moisture is in the powder important?
4. What criteria are important for the printed part and how can they be tested ?
5. What are the differences in properties between the different printed parts?
6. How can the metal powder be made ready for production, should there be moisture in the powder?
EFFECT OF LAYER THICKNESSSTEFAN SMIT
17
How does the layer thickness affect the quality / properties ? Balance between production time – quality
Experience / guidelines for various materials
EFFECT OF LAYER THICKNESS (2)STEFAN SMIT
18
Topics to be covered:1. What are the limits for the layer thickness?
Set the range to be investigated
2. What criteria are important for the printed part?
3. How can they be tested ?
4. What are the differences in properties between the different printed parts?
3. PROGRESS WP-2
19
3. PROGRESS WP-3
20
4. COFFEE / TEA…
21
5. INTRODUCTION FOKKER SERVICES + GUIDED TOUR THROUGH WAREHOUSE
22
6. 3D PRINTING AT THE NORWEGIAN DEFENCE
23
MSc projects: 8 months (WP-1) or half a year (WP-2, WP-3)
Shorter projects: WP-1: Internship (3 months) WP-2: BSc (7-14 weeks work load, typically part time) WP-3: BSc (10 weeks, typically full-time)
Recruitment of students based on concise project desciptions / research questions
7. FOLLOW-UPDEFINITION OF NEW BSC/MSC PROJECTS
24
student project
project student
Possibilities for third parties to join meetings Related research projects (researchers) Related MSc / BSc projects (e.g. quick scan at other
companies; attendance of student + company advisor?) Industry / consultancy
Primary contact person at Army
Next meeting Timing: June 2015 Location?
7. FOLLOW-UP
25
ANY OTHER MATTER?
26
AND NOW…INFORMAL DINNER
27
Restaurant Gusto Hotel NH Amsterdam Schiphol AirportKruisweg 495, Hoofddorp
(within walking distance)
top related